Oracle Client 10.1.0.2.0 Core Dumps

I have a strange problem where I intermittently receive Oracle client core dumps. I am running version 6 of the WebSphere Message Broker, which communicates with a remote Oracle database. I am using DataDirect to connect to the database and am running the following Oracle versions:
Client: 10.1.0.2.0
Database: 10.1.0.5.0 64 bit
The following is an excerpt from the broker’s .odbc.ini file:
[OTDAWMB]
Driver=/opt/IBM/mqsi/6.0/merant/lib/UKor820.so
Description=DataDirect 5.0 Oracle
EnableDescribeParam=1
OptimizePrepare=1
ServerName=DTHU
WorkArounds=536870912
ProcedureRetResults=1
ColumnSizeAsCharacter=1
Here’s the problem:
We submit batch loads where 50,000 messages are put on a queue. Each message processed by the broker involves multiple database inquiries and insert statements. On average we process 10 messages / second which means we’re constantly hitting the database for over an hour. On occasion, we receive a core dump from the broker which points to an Oracle library. The following is an excerpt from the broker’s abend file:
----------------------------- Stack dump for current thread ( 6426)
(0xd70cea34+0x000004e8) ttcdrv [opt/oracle/OraHome_1/lib32/libclntsh.a(shr.o)]
(0xd6e5ee1c+0x00000050) nioqwa [opt/oracle/OraHome_1/lib32/libclntsh.a(shr.o)]
(0xd6b6eef4+0x00000588) upirtrc [opt/oracle/OraHome_1/lib32/libclntsh.a(shr.o)]
(0xd6c4f984+0x0000006c) kpurcsc [opt/oracle/OraHome_1/lib32/libclntsh.a(shr.o)]
(0xd6d33028+0x000005dc) kpuexecv8 [opt/oracle/OraHome_1/lib32/libclntsh.a(shr.o)]
(0xd6d34328+0x00001004) kpuexec [opt/oracle/OraHome_1/lib32/libclntsh.a(shr.o)]
(0xd6d22174+0x0000001c) OCIStmtExecute [opt/oracle/OraHome_1/lib32/libclntsh.a(shr.o)]
(0xd67cb3f8+0x00000000) <no name available> [opt/IBM/mqsi/6.0/merant/lib/UKor820.so]
(0xd675bc20+0x00000000) <no name available> [opt/IBM/mqsi/6.0/merant/lib/UKor820.so]
(0xd675a8a8+0x00000000) <no name available> [opt/IBM/mqsi/6.0/merant/lib/UKor820.so]
(0xd6796340+0x00000000) <no name available> [opt/IBM/mqsi/6.0/merant/lib/UKor820.so]
(0xd5f2f248+0x00000000) <no name available> [opt/IBM/mqsi/6.0/lib/libodbc.a(odbc.so)]
(0xd5eeb1b8+0x00000000) <no name available> [opt/IBM/mqsi/6.0/lib/libodbc.a(odbc.so)]
(0xd472260c+0x0000010c) execute__16ImbOdbcStatementFv [opt/IBM/mqsi/6.0/lib/libMessageServices.a(libMessageServices.a.so)]
This can happen at any time and can happen multiple times throughout the load. IBM says it’s a problem with the Oracle client (ILLEGAL INSTRUCTION) and there’s nothing that can be done from their end.
Has anyone run across something similar? Could this be network related?

From dump message, looks like your client are calling whole banch of 32bit library. Are your application server also 64 bit ? Can you try install a 64bit client?
It's also a good idea to patch up your client a bit.
You should also consider submit a SR on metalink.

Similar Messages

Linux 6.1/Oracle 8.1.5 Pro C compilation core dumps

Linux installation did not place stdarg.h or stddef.h in the /usr/include directory for some reaon. I located different copies in other directories and have created symobolic links to them all in the end. BUT all result in the following error when I attempt to make sample1.pc in $ORACLE_HOME/precomp/demo/proc. Has anyone got any ideas how I can fix this problem.
Yours hopefully Kev
make -f demo_proc.mk sample1
gmake -f /oracle/app/oracle/product/8.1.5/precomp/demo/proc/demo_proc.mk
OBJS=sample1.o EXE=sample1 build
gmake[1]: Entering directory `/oracle/app/oracle/product/8.1.5/precomp/demo/proc'
proc iname=sample1
Pro*C/C++: Release 8.1.5.0.0 - Production on Sun Jan 9 17:02:05 2000
(c) Copyright 1999 Oracle Corporation. All rights reserved.
System default option values taken from:
/oracle/app/oracle/product/8.1.5/precomp/admin/pcscfg.cfg
gmake[1]: *** [sample1.o] Segmentation fault (core dumped)
gmake[1]: Leaving directory `/oracle/app/oracle/product/8.1.5/precomp/demo/proc'
make: *** [sample1] Error 2
null

Thanks for your input. But having investiagted further I have made progress.
On one of the FAQ docs listed throughout the Linux Forum I found an example of what should be in the pcscfg.cfg file. Once this was in place I then had, /usr/bin/ld cannot find -laio (or the file /usr/lib/libaio.a). To get a clean(ish) compile, I created a symbolic link from libc.a to libaio.a which is crude but was effective. I had a working Pro C exe.
I understand that the second patch solves the libaio.a prob as well as others. But a colleague has installed it and had to regress it, due to more damaging problems he listed but I cannot recall at this time.
Thanks again.

Webcenter crashing with core dump

Hi All,
Once in a while Webcenter(11.1.1.5) is crashing and generating core dump and the error message is same evertime. We tried to research on addPartialTriggerListeners and found this kind of behaviour is a bug in apache trinidad version 1.2.5-core and is fixed in 1.2.7-core. But the webcenter we are using as version 1.2.12. Also the issue seems to be comming from webcenter/adf framework itself as none of our code uses addPartialTriggerListeners.
Please help us resolve this issue as we are getting this issue in our production environment and we need to fix this asap.
# A fatal error has been detected by the Java Runtime Environment:
# SIGSEGV (0xb) at pc=0xffffffff7318caf0, pid=19921, tid=149
# JRE version: 6.0_29-b11
# Java VM: Java HotSpot(TM) 64-Bit Server VM (20.4-b02 mixed mode solaris-sparc compressed oops)
*# Problematic frame:*
+*# J org.apache.myfaces.trinidadinternal.context.RequestContextImpl.addPartialTriggerListeners(Ljavax/faces/component/UIComponent;[Ljava/lang/String;)V*#+
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
--------------- T H R E A D ---------------
Current thread (0x00000001145ba000): JavaThread "[ACTIVE] ExecuteThread: '13' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon [_thread_in_Java, id=149, stack(0xfffffffea6800000,0xfffffffea6900000)]
siginfo:si_signo=SIGSEGV: si_errno=0, si_code=1 (SEGV_MAPERR), si_addr=0x0000000000000000
Registers:
G1=0xffffffff503d5098 G2=0x00000001145ba000 G3=0xffffffff73516254 G4=0x00000000000000d1
Thanks

Oracle Support has a thread and work around for this.
DocID 1514563.1
Applies to:
Oracle WebCenter Portal - Version 11.1.1.5.0 and later
Information in this document applies to any platform.
Purpose
Java HotSpot Virtual Machine, a core component of Oracle's Java SE platform, known to core dump (resulting in a server crash) while optimizing certain methods in Oracle WebCenter.
If you can switch to JRockit you can get around it also. Otherwise follow the note and setup the appropriate pre-compile excludes in your WC startup script.

Pro*c program causing core dump in 11g

hello every one,
I am trying to debug a pro*c program which is resulting in a core dump. It used to work fine in with Oracle 10g precompiler but is causing a core dump with 11g. When I run dbx here is what I get.
dbx wreg309
Type 'help' for help.
[using memory image in core]
reading symbolic information ...
Segmentation fault in u_fsetcodepage_3_8 at 0x9000000014f4f70 ($t1)
0x9000000014f4f70 (u_fsetcodepage_3_8+0x68) f87f0010 std r3,0x10(r31)
Any ideas what this means ? Thanks.

Hi,
I came across your problem on the Oracle Discussions Forum from back on June of 2009.
I am working with a pro*c program, in Banner 8. I getting the same message from a core dump,, that you got. I was hoping
you might have written down what you did to resolve it.
My pro*c program is key to running all the SQR code we have. So it's very important. The version of sqr that gets
linked into it is 32-bit and our environment is 64-bit. Our contract with Oracle for SQR has lapsed (it's a long
and expensive story and this is probably not the place). My whole migration to Oracle 11 is being held up by this.
I realize it's been a while since you worked on it but if you could tell me how you resolved your problem, I might be
able to do the same.
Thanks,
Tom Mayne
North Shore Community College
Danvers MA
[email protected]
cell 978 423 6867

Weblogic Core Dumps on Solaris with Hotspot Server VM

For Sun Microsystems SPARC with Solaris 2.7 the supported platform is
"SunSoft SDK 1.3.1 JavaTM 2 Runtime Environment, Standard Edition (build
1.3.1-b24) Java HotSpotTM Server VM (build 1.3.1-b24, mixed mode)"
We have set the MaxPermSize as specified below and are still receiving
periodic core dumps in a production environment. The most recent of which
is "Unexpected Signal : 11 occurred at PC=0xee4b5d00 Function
name=JVM_CurrentTimeMillis" a reported bug on Sun's bug parade (Bug Id
#4488864). Are there some other settings that we should try? Is there a
more stable VM we should be using like "SunSoft SDK 1.3.0 JavaTM 2 Runtime
Environment, Standard Edition (build 1.3.0) "?
Help would be appreciated,
Thanks
Problems with JDK 1.3 crashing
If you have problems with OutOfMemory errors and the JVM crashing with JDK
1.3, try setting: -XX:MaxPermSize=128m. There is currently an open bug on
Sun's bug parade that describes this problem. See,
http://developer.java.sun.com/developer/bugParade/bugs/4390238.html

FYI: Stability seems to have been achieved by setting:
-XX:MaxNewSize=64m
-XX:MaxPermSize=128m
"Paul Hamill" <[email protected]> wrote in message
news:[email protected]..
Unfortunately we tried switching to client and we still periodically getthe
core dumps.
"Dimitri Rakitine" <[email protected]> wrote in message
news:[email protected]..
I'd be interested to know this as well - so far the only stable option
that I know of is to use client JVM. Server Hotspot crashes, sooner
or later. 1.3.1-b24 server crashes as well, but not the client JVM.
Paul Hamill <[email protected]> wrote:
For Sun Microsystems SPARC with Solaris 2.7 the supported platform is
"SunSoft SDK 1.3.1 JavaTM 2 Runtime Environment, Standard Edition
(build
1.3.1-b24) Java HotSpotTM Server VM (build 1.3.1-b24, mixed mode)"
We have set the MaxPermSize as specified below and are still receiving
periodic core dumps in a production environment. The most recent of
which
is "Unexpected Signal : 11 occurred at PC=0xee4b5d00 Function
name=JVM_CurrentTimeMillis" a reported bug on Sun's bug parade (Bug Id
#4488864). Are there some other settings that we should try? Is
there
a
more stable VM we should be using like "SunSoft SDK 1.3.0 JavaTM 2Runtime
Environment, Standard Edition (build 1.3.0) "?
Help would be appreciated,
Thanks
Problems with JDK 1.3 crashing
If you have problems with OutOfMemory errors and the JVM crashing with
JDK
1.3, try setting: -XX:MaxPermSize=128m. There is currently an open bugon
Sun's bug parade that describes this problem. See,
http://developer.java.sun.com/developer/bugParade/bugs/4390238.html
Dimitri

Install and Configure Oracle client in Fedora core 3

Hi guys
I am raghu ,
I need a help regarding Oracle client installation in Fedora core 3
can any one guide where to get oracle client and installation steps
Thanks
Raghu

Hello.
You could use paper for installation of 9i or 10g database because client is one of options of installer.
http://ivan.kartik.sk/oracle/install_ora9_fedora.html
http://ivan.kartik.sk/oracle/install_ora10gR2_fedora.html
http://www.oracle.com/technology/tech/linux/install/index.html
You could also install only instant client (so you don't need download all 3 CDs of Oracle database) and set appropriate enviroment.
You could obtain it from:
http://www.oracle.com/technology/tech/oci/instantclient/instantclient.html

Throws Core Dump for OCISessionBegin() on Linux for Oracle Client v10.2.0.2

hi,
The OCI method, OCISessionBegin() is throwing an core dump on 10g client in Linux on C++, but the same code works fine for 8i and 9i client. Core dumps for 10g Client. 10g tnsnames.ora file is same as of 9i. I just debeggued with the core and says failing in OCISessionBegin() method. I would like to know is there any problem with Oracle Client v10.2.0.2? or how does i can solve the issue? appriciate a quick help in this regard.
Thanks,
Sreeni

Have you looked in the Knowledge Base information at metalink? That would be the place to start.
If that does not work then the next step would be to remove this thread and post in the OCI - OCCI forum where there are people that can actually help you.

Oracle Client(8.0.5) installation on Linux(6.0)

Please Help,
These are the steps followed in the Oracle
client installation of the Linux
version
1. Loaded SQLNET, TCP/IP Adapter and sqlplus from the Oracle CD for Linux.
2. While running SQLPLUS it gave the 'Missing Library file'
3. Added LD_LIBRARY_PATH parameter to .profile, problem solved.
4. While running SQLPLUS a new message 'Segmentation Fault - Core dumped'
started coming.
After analysing it was observed that none of the Linux memory parametre
required for oracle had been tuned. these parameters are :-
shmmax,shmseg, shmmin, shmmni, semmns, semmni
We know the value of these parameters but the problem is that in linux we
are not able to find the Kernel paramater file,
as we do not know the Kernel parameter file name and the location in which
it is situated.
I have done the configuration of Oracle in Sun Solaris successfully and
also modified the Kernel parameter. the following in the sample data
extracted from the /etc/system file present in Sun Solaris.
set shmsys:shminfo_shmmax=208388608
set shmsys:shminfo_shmseg=15
set shmsys:shminfo_shmmin=1
set shmsys:shminfo_shmmni=150
set semsys:seminfo_semmns=250
set semsys:seminfo_semmni=100
What I request is that kindly tell me how and where to update the same in
the Linux for installing Oracle Client(8.0.5) on Linux(6.0).Regards And Thanks
Sanjay Kr. Pandey

You'll have to be prepared to wade through and understand the Linux way of recompiling your kernel. The files can be located using the "find" command. There is some great "HOW-TO"s in the Linux RedHat site.
Tip: Be very careful how you answer the "make config" questions because it can mess up the resulting VMLINUZ object. Also, be sure to place secondary entry in your "lilo.conf" to allow you a graceful way of getting back to the old kernel should the new one fail.
Good Luck!

Could not find main class program will exit error while installing Oracle Client 32 bit on windows 7 32 bit OS?

Hi Experts,
When I am installing Oracle client 32 bit software on Windows 7 32 bit I am getting error as "could not find main class program will exit"
I have tried installing latest Java software 7 also JDK 1.6.0_34 still I am getting the same problem below is my " oraparam.ini " details
[Oracle]
DISTRIBUTION=TRUE
SOURCE=../stage/products.xml
LICENSE_LOCATION=
BOOTSTRAP_COMPS="oracle.swd.oui:11.1.0.6.0,oracle.swd.oui.core:11.1.0.6.0,oracle.jdk:1.5.0.1.1"
JRE_SCRATCH_LOC=jdk/jre
JRE_MEMORY_OPTIONS=" -mx96m"
DEFAULT_HOME_LOCATION=product\11.1.0\client
DEFAULT_HOME_NAME=OraClient11g_home
NO_BROWSE=/net
NLS_ENABLED=TRUE
BOOTSTRAP=TRUE
EXT_JLIB=../stage/ext/jlib
OUI_VERSION=11.1.0.6.0
## JRE_VERSION is only for Windows. This is to copy accessbridge dlls
JRE_VERSION=1.4.2
ACCESS_DIR=../install/access
#SHOW_HOSTNAME=ALWAYS_SHOW shows the hostname panel always
#SHOW_HOSTNAME=NEVER_SHOW does not the hostname panel
#SHOW_HOSTNAME=CONDITION_SHOW shows the hostname panel on condition
SHOW_HOSTNAME=NEVER_SHOW
#THIN_JDBC_FILENAME is optional and defaults to classes12.jar
#The value specified for this should be packaged with OUI, and should
#be relative to <OUI expanded stagedir>/jlib/
THIN_JDBC_FILENAME=classes12.jar
#RUN_OUICA specifies the batch script name that needs to be run
#The script is ouica.bat for win32, and ouica.sh for solaris.
#If the value is not specified, then the OUICA script is not run
RUN_OUICA=ouica.bat
CLUSTERWARE={"oracle.crs","10.1.0.2.0"}
SILENT_VARIABLE_VALIDATION=TRUE
[Generic Prereqs]
MIN_DISPLAY_COLORS=256
[IMAGES]
FILE1=images/billboards.gif
LICENSE_LOCATION=license.txt

Duplicates of the other two times you asked this question:
https://forums.oracle.com/thread/2559093
https://forums.oracle.com/thread/2558027
(and this time, your question does not appear to have anything to do with this particular forum space, either)
Duplicate is locked.
Do not EVER multi--post. That is extremely bad forum etiquette.

Oracle Client 11g R2 in Windows 7 connecting a RAC server

I have the following setup in my laptop
Windows 7
Oracle Client 11g R2
I'm trying to connect "SQL plus" to a load balanced server (RAC) configured as below
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for HPUX: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
The problem is, the connection creation is not consistent. It is throwing the following error randomly.
ORA-12545: Connect failed because target host or object does not exist
I'm able connect to another server (not RAC) without any issues. Even TOAD is giving the same error. After few tries, it works.
Anyone facing the same problem, got any solution???
Thanks
Edited by: user3918865 on Oct 7, 2010 4:14 AM

Bruno Palma wrote:
Hi all.
I've done all the checklists suggested but I'm still getting the error. The problem is not with the network and the servers cos I'm working in a Company and when I had Windows XP SP 3 and Oracle Client 10gR2 all was working fine. I'm with Windows 7 Professional 64-bit now. I'm almost sure the problem is with Windows 7 x Oracle Client but it's hard to figure out what's going on. Does anyone have idea what could it be ??I would generate a client side sqlnet trace, then go on a fishing expedition. There's a lot of dense stuff in a full trace, but if you don't panic and just try to make sense of what you can, you'll probably flush it out.
To enable the trace, go to your sqlnet.ora file and add these lines:
TRACE_FILE_CLIENT=clientsqlnet.trc
TRACE_DIRECTORY_CLIENT=C:\app\oracle\product\11.2.0\client_1\network\trace
#TRACE_LEVEL_CLIENT=off
#TRACE_LEVEL_CLIENT=user
#TRACE_LEVEL_CLIENT=admin
TRACE_LEVEL_CLIENT=support
DIAG_ADR_ENABLED = off

Error when upgrade Oracle client 9.2.0.5.0 to 9.2.0.5.3

Hi all,
I'm new with Oracle community so I hope you guys can help me and give me some suggestion with my case.
I got an error when upgrade Oracle client 9.2.0.5.0 to 9.2.0.5.3
I tried many times but can’t do upgrade successfully
This the error message I got when doing the job:
[ http://picasaweb.google.com/hoagao84/Oracle#5443442931867670386]
Appreciate your help.
Log files:
Command arguments are: apply
OPatch version is: 1.0.0.0.48
Using ORACLE_HOME/oui to look up oui libs...
Oracle Home = d:\oracle\ora92
Location of Oracle Inventory = D:\oracle\ora92\inventory
Oracle Universal Installer shared library = D:\oracle\ora92\oui\lib\win32\oraInstaller.dll
Path to Java = "D:\oracle\ora92\jdk\jre\bin\java.exe"
Location of Oracle Inventory Pointer = N/A
Location of Oracle Universal Installer components = D:\oracle\ora92\oui
Required Jar File under Oracle Universal Installer = jlib\OraInstaller.jar
Checking if this is a RAC system...
Accessing inventory... This may take up to 300 seconds.
(retry 10 times, delay 30 seconds each time)
System Command: ""D:\oracle\ora92\jdk\jre\bin\java.exe" -Dopatch.retry=10 -Dopatch.delay=30 -classpath "D:\oracle\ora92\oui\jlib\OraInstaller.jar;D:\oracle\ora92\oui\jlib\srvm.jar;D:\oracle\ora92\opatch\jlib\opatch.jar;D:\oracle\ora92\oui\jlib\xmlparserv2.jar;D:\oracle\ora92\oui\jlib\share.jar;.:D:\oracle\ora92\jlib\srvm.jar" opatch/O2O "d:\oracle\ora92" "D:\oracle\ora92\oui" opatch.pl 1.0.0.0.48"
Result:
output to OPatch:
IS_CLUSTER=0
CHECK_CLUSTER=1
NODE_LIST=NULL
NODE_COUNT=0
LOCAL_NODE=NULL
IS_CFS=0
RAC_CODE=0
HOME_INDEX=1
This is not a RAC system
Interim Patch ID: 3738339
Checking the patch inventory.
Component Name: oracle.rdbms
Component Version: 9.2.0.5.0
Component Name: oracle.rsf.rdbms_rsf
Component Version: 9.2.0.5.0
Component Name: oracle.rsf.oracore_rsf
Component Version: 9.2.0.5.0
Component Name: oracle.rsf.xdk_rsf
Component Version: 9.2.0.5.0
Component Name: oracle.rsf.dbjava_rsf
Component Version: 9.2.0.5.0
Component Name: oracle.java.javavm.javatools
Component Version: 9.2.0.5.0
Component Name: oracle.cartridges.context
Component Version: 9.2.0.5.0
Component Name: oracle.cartridges.locator
Component Version: 9.2.0.5.0
Component Name: oracle.rsf.net_rsf
Component Version: 9.2.0.5.0
Component Name: oracle.rsf.ldap_rsf
Component Version: 9.2.0.5.0
Component Name: oracle.emprod.oemagent.base_oemagent
Component Version: 9.2.0.5.0
Component Name: oracle.isearch.is_common
Component Version: 9.2.0.5.0
Component Name: oracle.options.olap.cwmlite
Component Version: 9.2.0.5.0
Component Name: oracle.rsf.nlsrtl_rsf
Component Version: 9.2.0.5.0
Bugs fixed by this patch 3738339:
3741539 : LOGICAL STANDBY FAILS ORA-1422 MERGING PARTITIONS WITH LOB COLUMN
2800494 : KCBZIB XHINT FORCES SINGLE BLOCK READS INADVERTENTLY FOR SINGLE INSTANCE
3239873 : EXTREMELY HIGH PARSING TIMES WITH AND BETWEEN IN ORACLE 9.2.0
2918138 : ORA-600 (KOHDTF048) WHEN USING PIPELINED PL/SQL TABLE FUNCTIONS
3575743 : 2004-S144E
3554319 : APPSST; ORA-00600 [KQLUDP2] RUN DURING APPS UPGRADE
3666502 : ORA-00600 [1236] RANDOMLY OCCURING
3752406 : MERGE LABEL REQUEST ON TOP OF 9.2.0.5 FOR BUGS LISTED BELOW
3528282 : 2004S075E
3412818 : REPEATED MESSAGES IN LGWR TRACE
2690205 : 2003-S190E
3543125 : 2004-S089E
3571233 : 2004-S141E
3458446 : 2004S059E
2810394 : LNXN2PD RETURNS SCALE OF 42 WHEN COVERTING ORACLE NUMBER 0. TO PACKED
3323435 : 2003-S126E
3356103 : ORA-600 [OPIBND0; OACCSID] IN PARALLEL QUERY SERVER P001 EXECUTING OLAP QUERY
3668224 : CBO CALCULATE LOWER CMPTD CDN AND LEADS TO BAD EXECUTION PLAN.
3492040 : ORA-600 [KGHFRF1] SELECTING FROM V$LOGMNR_CONTENTS
3150750 : SM; (DBMS_STATS/AUTO_SAMPLE_SIZE) ESTIMATED NDV IS WRONG WITH HIGH SKEWS
3566469 : 2004-S138E
3320622 : 2003-S191E
3749394 : SCORE() FOR FUZZY TEXT OPERATOR DIFFERENT FOR FUNCTIONAL VERSUS INDEX ACCESS
3609791 : PSR 9.2.0.5.0 BREAKS CALL DB2 STORED PROCEDURE WITH DECIMAL PARM. SQLCODE -310
3698501 : CGS/IMR GENERATES SAME SEQ/INCARNATION NUMBER AFTER RECONFIG
3668572 : ORA-979 WHEN CURSOR_SHARING=FORCE OR SIMILAR
3179637 : UNABLE TO CREATE AN ORACLECONTEXT ON AD UNDER A CHILD DOMAIN
3571226 : 2004-S140E
3240280 : JOBS SUDDENLY STOP ALTHOUGH NEXT_DATE <= SYSDATE
2964252 : LPX-00252 WHEN PARSING VALID XML / DTD FILE
3617519 : TRANSFORMATION FAILING WITH ORA-932 INCONSISTENT DATATYPE
3172282 : ORACLE CORE DUMPS WHEN TRY TO LIST ALL ACES FOR A SPECIFIC ACL
3637624 : WRONG RESULTS WITH DISTINCT COUNT AND UNNESTED EXISTS SUBQUERY
3542588 : SAME EVENT 38041 USED FOR BUG FIXES 3444115 AND 3131551
3358490 : ORA-00600 [KQSCCCK;1],[],[],[],[],[],[],[]
3177513 : WRONG PLAN - JOIN NOT AVOIDED USING BITMAP JOIN INDEX IF UNIQUE INDEX TOO
3509265 : SHUTDOWN DID NOT COMPLETE WITH WAITING FOR INSTANCES TO LEAVE; 2
3516951 : BAD EXECUTION PLAN WITH MERGE JOIN CARTESIAN IN TEMP TABLE
2954891 : ORA-600 KJMXMPM;DIFFUS], [990307644], [990307644], [3304659678]
3388633 : LOGICAL STANDBY APPLY STOPPED WITH ORA-00600; [17090]
3371796 : EXPLAIN PLAN HANGS ON KKORMINL
3622875 : ORA-1499 AND ANALYZE TABLE VALIDATE STRUCTURE CASCADE ONLINE
3412136 : BAD EXECUTION WITH MERGE JOIN CARTESIAN IN ORACLE 9.2.0.4 AND MERGEFIX 3363655
3540576 : 2004-S083E
3575747 : 2004-S145E
3566813 : CTAS WITH UNION ALL AND ORDER BY RESULTS IN ORA-3113
3811906 : MERGE LABEL REQUEST ON TOP OF 9.2.0.5
2824035 : FXD; ORA-22921 CAUSING 4 DIFS IN LRGXG2.
3354470 : 2003-S195E
3518909 : UGA MEMORY NOT RELEASED AFTER USING XMLPARSER
3617042 : BAD PLAN FOR SCH-XMLTYPE BASED WITH COLLECTIONS MAPPED TO OCT
3583686 : MEMORY ALLOCATION ERROR DURING SPATIAL QUERY
3597640 : MERGE LABEL REQUEST ON TOP OF 9.2.0.5.0
3559212 : WRONG RESULTS RETURNED WITH 9.2.0.4 AND CBO
3625370 : CGS/IMR RECONFIGURATION GOT HUNG DURING A NEW MEMBER JOINING
3475932 : CROSS INSTANCE ARCHIVE LOG NOT GENERATED REMOTELY
3635177 : PSRC; ORA-7445 [KXCCUIN] POSSIBLE FROM DML
3430832 : ORA-600 [25012] AFTER CREATE OF INDEX ONLINE PARALLEL ON PART TABLE
2338704 : FXD; 1; QUERIES ON COLLECTIONS STORED IN OUT-OF-LINE TABLES ARE NOT VIEW MERGED
3253770 : 9I-GSI-CRITICAL PROGRAMS TIME OUT WAITING FOR LIBRARY CACHE PIN
Reading patch XML files and doing sanity checks.
Read the command to action file map.
Performing initial safety check.
Checking active processes:
Accessing inventory... This may take up to 300 seconds.
(retry 10 times, delay 30 seconds each time)
System Command: ""D:\oracle\ora92\jdk\jre\bin\java.exe" -Dopatch.retry=10 -Dopatch.delay=30 -classpath "D:\oracle\ora92\oui\jlib\OraInstaller.jar;D:\oracle\ora92\oui\jlib\srvm.jar;D:\oracle\ora92\opatch\jlib\opatch.jar;D:\oracle\ora92\oui\jlib\xmlparserv2.jar;D:\oracle\ora92\oui\jlib\share.jar;." opatch/CheckConflict "D:\oracle\ora92\oui" "d:\oracle\ora92" opatch.pl 1.0.0.0.48 3738339 "3253770 2338704 3430832 3635177 3475932 3625370 3559212 3597640 3583686 3617042 3518909 3354470 2824035 3811906 3566813 3575747 3540576 3412136 3622875 3371796 3388633 2954891 3516951 3509265 3177513 3358490 3542588 3637624 3172282 3617519 2964252 3240280 3571226 3179637 3668572 3698501 3609791 3749394 3320622 3566469 3150750 3492040 3668224 3356103 3323435 2810394 3458446 3571233 3543125 2690205 3412818 3528282 3752406 3666502 3554319 3575743 2918138 3239873 2800494 3741539 " C:\TEMP\patch92053\3738339\etc\config\actions"
Result:
d:\oracle\ora92\opatch\opatch.pl version: 1.0.0.0.48
Copyright (c) 2001,2002,2003 Oracle Corporation. All Rights Reserved.
Error in executing Java program to check conflict
ERROR: OPatch failed during pre-reqs check.

This is all the message when I run command in CMD prompt.
C:\temp\patch92053\3738339\perl d:\oracle\ora92\opatch\opatch.pl apply
Opatch Version 1.0.0.0.48
Perl Version 5.008007
Oracle Home = d:\oracle\ora92
Location of Oracle Inventory = D:\oracle\ora92\inventory
Oracle Universal Installer shared library = D:\Oracle\ora92\oui\lib\win32\oraInstaller.dll
Path to Java = "D:\oracle\ora92\jdk\jre\bin\java.exe"
Location of oracle Inventory Pointer = N/A
Location of Oracle Universal Installer components = D:\Oracle\ora92\oui
Require Jar File under Oracle Universal Installer = jlib\OraInstaller.jar
The filename, directory name, or volume label syntax is incorrect.
D:\oracle\ora92\opatch\opatch.pl version 1.0.0.48
Copyright (c) 2001,2002,2003 Oracle Corporation. All Rights Reserved
Error in executing Java program to check conflict
Error: Opatch failed during pre-reqs check.

Error installing Oracle client 10.2 on Redhat5 64bit

I get the following error when I'm trying to run Oracle client 10.2 x86 32bit on a redhat enterprise 5 64 bit. My understanding is that I can install client 32 on a 64 bit server. How can I make this work without getting 64bit client?
Error in invoking target 'client_sharedlib' of makefile '/home/auser/oracle/product/10.2.0
/client_1/network/lib/ins_net_client.mk'. See '/home/auser/oraInventory/logs/installActions2010-03-17_06-43-12PM.log' for details.
log file:
INFO: Using paramFile: /bi/10201_client_linux32/client/install/oraparam.ini
INFO:
INFO:
INFO: Checking installer requirements...
INFO:
INFO: Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
INFO: Passed
INFO:
INFO:
INFO: All installer requirements met.
INFO:
INFO:
INFO: The commandline for unzip:
INFO: /bi/10201_client_linux32/client/install/unzip -qqq ../stage/Components/oracle.swd.jre/1.4.2.8.0/1/DataFiles/\*.jar -d /tmp/OraInstall2010-03-17_06-43-12PM
INFO: The commandline for unzip:
INFO: /bi/10201_client_linux32/client/install/unzip -qqq ../stage/Components/oracle.swd.oui/10.2.0.1.0/1/DataFiles/\*.jar -d /tmp/OraInstall2010-03-17_06-43-12PM
INFO: The commandline for unzip:
INFO: /bi/10201_client_linux32/client/install/unzip -qqq ../stage/Components/oracle.swd.oui.core/10.2.0.1.0/1/DataFiles/\*.jar -d /tmp/OraInstall2010-03-17_06-43-12PM
INFO:
INFO: The number of files bootstrapped for the jre is 590.
INFO:
INFO: The number of files bootstrapped for the oui is 94.
INFO: Execvp of the child jre : the cmdline is /tmp/OraInstall2010-03-17_06-43-12PM/jre/1.4.2/bin/java, and the argv is
INFO: /tmp/OraInstall2010-03-17_06-43-12PM/jre/1.4.2/bin/java
INFO: -Doracle.installer.library_loc=/tmp/OraInstall2010-03-17_06-43-12PM/oui/lib/linux
INFO: -Doracle.installer.oui_loc=/tmp/OraInstall2010-03-17_06-43-12PM/oui
INFO: -Doracle.installer.bootstrap=TRUE
INFO: -Doracle.installer.startup_location=/bi/10201_client_linux32/client/install
INFO: -Doracle.installer.jre_loc=/tmp/OraInstall2010-03-17_06-43-12PM/jre/1.4.2
INFO: -Doracle.installer.nlsEnabled="TRUE"
INFO: -Doracle.installer.prereqConfigLoc=/tmp/OraInstall2010-03-17_06-43-12PM/prereq
"installActions2010-03-17_06-43-12PM.log" 4698L, 304960C

>
My understanding is that I can install client 32 on a 64 bit server. How can I make this work without getting 64bit client?
>
Your 64-bit OS will need to be 32-bit compatible, and that is not always guaranteed; Does it support both binaries?
I would strongly recommend that you download the 64-bit Client software; it should work just fine. Do you mind sharing with us why you do not wish to install the 64-bit Client software?
{thread:id=974150}
Regards,
Phiri

How do I know the version of Oracle Client

How can I find out the version of my Oracle Client?
Thanks!

arbabu wrote:
SQL> select BANNER product_versions
2 from v$version
3
SQL> /
PRODUCT_VERSIONS
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
SQL>That is obviously wrong.
SQL*Plus: Release 9.2.0.6.0 - Production on Fri Oct 31 10:50:34 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select BANNER product_versions
2 from v$version;
PRODUCT_VERSIONS
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for IBM/AIX RISC System/6000: Version 10.2.0.4.0 - Productio
NLSRTL Version 10.2.0.4.0 - Production
SQL> quit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Y:\>sqlplus -v
SQL*Plus: Release 9.2.0.6.0 - Production
Y:\>Nicolas.

Crash in 32 bit C++ application on Linux 5.4 with Oracle Client 11.2.0.2.

Hi ,
I am getting following crash in 32 bit C++ application built on Linux platform 5.4 with Oracle client version 11.2.0.2.
Program terminated with signal 6, Aborted.
[New process 22157]
#0 0xffffe410 in __kernel_vsyscall ()
(gdb) bt
#0 0xffffe410 in __kernel_vsyscall ()
#1 0xf7dc5c81 in raise () from /lib/libpthread.so.0
#2 0xf73d4d43 in skgesigOSCrash () from /opt/oracle/11.2.0.2/lib/libclntsh.so.11.1
#3 0xf7643d61 in kpeDbgSignalHandler () from /opt/oracle/11.2.0.2/lib/libclntsh.so.11.1
#4 0xf73d5003 in skgesig_sigactionHandler () from /opt/oracle/11.2.0.2/lib/libclntsh.so.11.1
#5 <signal handler called>
#6 0xffffe410 in __kernel_vsyscall ()
#7 0x00be7df0 in raise () from /lib/libc.so.6
#8 0x00be9701 in abort () from /lib/libc.so.6
#9 0x0804b716 in main (argc=2, argv=0xffabe244) at crewxa.cc:371From the stack trace, it seems that the crash is occurring at oracle client library libclntsh.so.11.1 . When looked at Metalink, there is a note Pro*c Application Cores On 11g Client [ID 1410089.1], which says that Pro *C application consistently produces core dumps with above stack trace in Oracle client 11.2.0.2 .
Such traces are resulting from the function “sqlnst ()”. But in this case, the stack is called from the main function of our application.
Please advice.

Thanks again, Phil.
It seems to be some specific situation, since I could get to install the same version (Client 11.2.0.1 32 bits) in a Windows Vista 64 bits.
I still hope somebody has an answer.
Best regards!

How to find version and arch of Oracle client installed

Hi all
I have sles 10 sp2 x86_64 on which oracle client 10.2 is installed. this installation was not done by me!
so i dont know what version/architecture (32/64 bit) mode of the oracle client is installed on the client.
from sqlplus -V i get only the version which is installed and not whether it is 32 or 64 bit. how can i find that out.
sqlplus -V
SQL*Plus: Release 10.2.0.1.0 - Production
with a bit of googling i found only the below link which says 10g client 32-bit cannot be installed on a 64 bit system.
i read this Installing 32-bit RDBMS Client software on x86_64 Linux. [ID 1075717.1]
Installing 32-bit RDBMS Client software on x86_64 Linux.
The only release of 32-bit RDBMS Client software that will properly install on an x86_64 Linux OS system is 11gR2 (aka 11.2.0.x)
    * 9iR2 (aka 9.2.0.x) 32-bit RDBMS Client software will NOT install on any x86_64 Linux OS system.
    * 10gR1 (aka 10.1.0.x) 32-bit RDBMS Client software will NOT install on any x86_64 Linux OS system.
    * 10gR2 (aka 10.2.0.x) 32-bit RDBMS Client software will NOT install on any x86_64 Linux OS system.
    * 11gR1 (aka 11.1.0.x) 32-bit RDBMS Client software will NOT install on any x86_64 Linux OS system.
The answer to "why", is that the 11gR2 Client software is the first version that includes syntax so that a 32-bit object is linked.can someone please throw more light on this?

If you have "64bit" string in V$VERSION it means Oracle 64bit is running.
SQL> select * from v$version;
BANNER
Oracle Database 10g Release 10.2.0.4.0 - 64bit Production
PL/SQL Release 10.2.0.4.0 - Production
CORE    10.2.0.4.0      Production
TNS for Linux: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - ProductionIf you have no "64bit" string in V$VERSION it means Oracle 32bit is running.

Oracle Client 10.1.0.2.0 Core Dumps

Similar Messages

Maybe you are looking for