Oracle cluster error

error copying directory /oracle/product/10.2.0 with exclude file list null to nodes avv2
PRKC-1073 failed to transfer directory to the second node
error on node avv2:bin/tar ../bin/coraenv cannot open file exists
/bin/tar../bin/genagtsh
/bin/tar../clsid
/bin/tar../extjob
how to correct this error . i am able to ping both nodes & ssh also works in both nodes

Though you are able to ping, is the /etc/hosts file updated. Check the interconnect, was there any disconnection while the installation process was running. The disconnection could be due to network sleep time configuration on the network adapter, etc.
Sami Malik

Similar Messages

Error while checking the status of Oracle Cluster ware

Hi
I was trying to install the database using dbca after setting up the grid and database software on LINUX x86-64 RHEL 5.7 machine. The database software version is 11.2.0.3. It throwing the error regarding the connectivity of clusterware. So I checked the status of clusterware.
-bash-3.2$ ./crsctl stat res -t
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4000: Command Status failed, or completed with errors.
-bash-3.2$
But when I ran below one:
-bash-3.2$ ./crsctl stat res -t -init
NAME TARGET STATE SERVER STATE_DETAILS
Cluster Resources
ora.asm
1 ONLINE ONLINE sfv9699 Started
ora.cluster_interconnect.haip
1 ONLINE ONLINE sfv9699
ora.crf
1 ONLINE ONLINE sfv9699
ora.crsd
1 ONLINE OFFLINE
ora.cssd
1 ONLINE ONLINE sfv9699
ora.cssdmonitor
1 ONLINE ONLINE sfv9699
ora.ctssd
1 ONLINE ONLINE sfv9699 OBSERVER
ora.diskmon
1 OFFLINE OFFLINE
ora.drivers.acfs
1 ONLINE ONLINE sfv9699
ora.evmd
1 ONLINE INTERMEDIATE sfv9699
ora.gipcd
1 ONLINE ONLINE sfv9699
ora.gpnpd
1 ONLINE ONLINE sfv9699
ora.mdnsd
1 ONLINE ONLINE sfv9699
So i saw that the crsd having some issue. I checked the alert log and crsd log. Below are the output.
Alert <server_name>.log
2012-10-20 15:37:51.408
[ohasd(3694)]CRS-2765:Resource 'ora.crsd' has failed on server 'sfv9699'.
2012-10-20 15:37:52.968
[crsd(5188)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /oracle2/app/11.2.0/grid/log/sfv9699/crsd/crsd.log.
2012-10-20 15:37:52.984
[crsd(5188)]CRS-0804:Cluster Ready Service aborted due to Oracle Cluster Registry error [PROC-26: Error while accessing the physical storage
ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
]. Details at (:CRSD00111:) in /oracle2/app/11.2.0/grid/log/sfv9699/crsd/crsd.log.
2012-10-20 15:37:53.471
[ohasd(3694)]CRS-2765:Resource 'ora.crsd' has failed on server 'sfv9699'.
2012-10-20 15:37:53.472
[ohasd(3694)]CRS-2771:Maximum restart attempts reached for resource 'ora.crsd'; will not restart.
CRSD.log
2012-10-20 15:37:52.456: [ CRSMAIN][3563381328] Checking the OCR device
2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Sync-up with OCR
2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Connecting to the CSS Daemon
2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Getting local node number
2012-10-20 15:37:52.459: [ CRSMAIN][3563381328] Initializing OCR
[   CLWAL][3563381328]clsw_Initialize: OLR initlevel [70000]
2012-10-20 15:37:52.897: [ OCRASM][3563381328]proprasmo: Error in open/create file in dg [DATA]
[ OCRASM][3563381328]SLOS : SLOS: cat=7, opn=kgfoAl06, dep=27140, loc=kgfokge
2012-10-20 15:37:52.898: [ OCRASM][3563381328]ASM Error Stack : ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: kgfoCheckMount returned [7]
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: The ASM instance is down
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: Failed to open [+DATA]. Returned proprasmo() with [26]. Marking location as UNAVAILABLE.
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: No OCR/OLR devices are usable
2012-10-20 15:37:52.968: [ OCRASM][3563381328]proprasmcl: asmhandle is NULL
2012-10-20 15:37:52.969: [    GIPC][3563381328] gipcCheckInitialization: possible incompatible non-threaded init from [prom.c : 690], original from [clsss.c : 5326]
2012-10-20 15:37:52.975: [ default][3563381328]clsvactversion:4: Retrieving Active Version from local storage.
2012-10-20 15:37:52.978: [ CSSCLNT][3563381328]clssgsgrppubdata: group (ocr_SFV9699-cluster) not found
2012-10-20 15:37:52.978: [ OCRRAW][3563381328]proprio_repairconf: Failed to retrieve the group public data. CSS ret code [20]
2012-10-20 15:37:52.981: [ OCRRAW][3563381328]proprioo: Failed to auto repair the OCR configuration.
2012-10-20 15:37:52.981: [ OCRRAW][3563381328]proprinit: Could not open raw device
2012-10-20 15:37:52.981: [ OCRASM][3563381328]proprasmcl: asmhandle is NULL
2012-10-20 15:37:52.983: [ OCRAPI][3563381328]a_init:16!: Backend init unsuccessful : [26]
2012-10-20 15:37:52.984: [ CRSOCR][3563381328] OCR context init failure. Error: PROC-26: Error while accessing the physical storage
ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
2012-10-20 15:37:52.984: [ CRSMAIN][3563381328] Created alert : (:CRSD00111:) : Could not init OCR, error: PROC-26: Error while accessing the physical storage
ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
2012-10-20 15:37:52.984: [    CRSD][3563381328][PANIC] CRSD exiting: Could not init OCR, code: 26
2012-10-20 15:37:52.984: [    CRSD][3563381328] Done.
=======================
I see in the above log that saying ASM instance is down and failed to open +DATA .
But the asm instance up and running
SQL> select instance_name,status from v$instance;
INSTANCE_NAME STATUS
+ASM1            STARTED
And we havent created any disk named DATA before the installation. We have created only below two disks
SQL> select name,header_status from v$asm_disk;
NAME HEADER_STATUS
ASM_DATA MEMBER
FLASH_RECOVERY MEMBER
But I am seeing a diskgroup in the v$asm_diskgroup which we havent created.
SQL> select name,state from v$asm_diskgroup;
NAME STATE
DATA MOUNTED
Ya this is a second time installtion. In the first installtion we created the asmdisk as DATA. But later everything (RAW device ) was formatted and this new disks has been created and installtion again started
[root@SFV9699 bin]# oracleasm listdisks
ASM_DATA
FLASH_RECOVERY
Seems like its trying to read the old disk DATA.
we have done asmscanning too with oracleasm scan disks. but no use.
Where I can remove the old entry of DATA disk.
It would be a great if a quick response get.
Thanks
SHIYAS M

The permission looks fine. If it was permission issue then y it is trying to read the DATA disk which I havent created this time at all ( But created in the first installation).
2012-10-20 15:37:52.459: [ CRSMAIN][3563381328] Initializing OCR
[ CLWAL][3563381328]clsw_Initialize: OLR initlevel [70000]
2012-10-20 15:37:52.897: [ OCRASM][3563381328]proprasmo: *Error in open/create file in dg [DATA]*[ OCRASM][3563381328]SLOS : SLOS: cat=7, opn=kgfoAl06, dep=27140, loc=kgfokge
2012-10-20 15:37:52.898: [ OCRASM][3563381328]ASM Error Stack : ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: kgfoCheckMount returned [7]
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: The ASM instance is down
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: *Failed to open [+DATA].* Returned proprasmo() with [26]. Marking location as UNAVAILABLE.
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: No OCR/OLR devices are usable
2012-10-20 15:37:52.968: [ OCRASM][3563381328]proprasmcl: asmhandle is NULL
The only disks created are
[root@SFV9699 dev]# oracleasm listdisks
ASM_DATA
FLASH_RECOVERY
And these disks are showing part of that group also.. Not quite sure how this happened..
what abt dropping this group.. will anything work.

ERROR SPECIFYING ORACLE CLUSTER REGISTRY LOCATION

Hi all,
im implementing oracle RAC 10g on Linux version 4, now i've already prepaired the shared disks on my nodes my situiation is am facing a problem in installing the clusterware where in specifying Oracle Cluster Registry Location it gives me an ERROR saying "The Location entered for the Oracle Cluster Registry is not shared across all the nodes in the cluster. Specify a shared raw partition or cluster file system file that is visible by the same name on all nodes of the cluster".
Thanks in advance!

No wonder! How can node2 see the drive which is local to node1??? I am assuming this is for your home testing. You need to have some kind of shared storage to implement RAC - typical examples are FireWire or alternatively NFS shares/mounts. There is an article on OTN which talks about implementing RAC using Firewire in RAC. Or you check out my blog entry http://chandradba.blogspot.com/2007/08/oracle-11g-rac-install-on-red-hat-50.html which talks about implementing RAC using NFS shares.
As I said, these configuration are not for other than your own testing....meaning non-production usage.
HTH
Thanks
-Chandra Pabba

Error while installing Oracle Cluster Ready Services Release 1 (10.1.0.2)

Hi all,
I am trying for RAC 10gR1 (10.1.0.2) using two machines with Windows 2000 Server. For this I need to install Oracle Cluster Ready Services Release 1 (10.1.0.2).
Machine details are as follows:-
Node 1:
Computer Name:     RAC1
Windows 2000 IP Configuration
Ethernet adapter Local Area Connection 2: (Used for Public Interface)
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 192.168.1.65
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection: (Used for Private Interface between the two nodes)
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 10.10.10.11
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Node 2:
     Computer Name:     RAC2
Windows 2000 IP Configuration
Ethernet adapter Local Area Connection 2: (Used for Public Interface)
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 192.168.1.181
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection: (Used for Private Interface between the two nodes)
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 10.10.10.12
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
I have made following entries in Hosts file of both the machines:-
192.168.1.65     RAC1
192.168.1.181     RAC2
10.10.10.11     RAC01-PRIV
10.10.10.12     RAC02-PRIV
192.168.1.201     RAC01-VIP
192.168.1.202     RAC02-VIP
I have completed all the pre-installation steps, i.e. configuring the disk for storage, and both the machine are communicating each other through there Private and Public interfaces. Now the problem appears when I am installing Oracle Cluster Ready Services, at the end of Installation following message appears and the auto configuration steps fails.
================================================================================================================
Output generated from configuration assistant "Oracle Cluster Ready Services Configuration Assistant":
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: rac1 rac01-priv rac1
node 2: rac2 rac02-priv rac2
Creating OCR keys for user 'administrator', privgrp ''..
Operation successful.
Now formatting voting device: \\.\votedsk
Successful in setting block0 for voting disk.
Format complete.
Step 1: checking status of CRS cluster
Step 2: configuring OCR repository
Step 3: configuring safe mode for CRS stack
Step 4: Starting up CRS stack on all nodes
RAC1 service OracleCSService in improper PENDING state, err(997)
RAC2 service OracleCSService in improper PENDING state, err(997)
Configuration assistant "Oracle Cluster Ready Services Configuration Assistant" failed
================================================================================================================
Output generated from configuration assistant "Oracle Notification Server Configuration Assistant":
Configuration assistant "Oracle Notification Server Configuration Assistant" failed
================================================================================================================
Output generated from configuration assistant "Oracle Private Interconnect Configuration Assistant":
PRIF-10: failed to initialize the cluster registry
Configuration assistant "Oracle Private Interconnect Configuration Assistant" failed
===============================================================
I would be highly obliged if any one tell me why it is happing like this and what could be the possible remedy.
Waiting for the respone.
With Regards
Dinesh
[email protected]

Hi user478171,
I have the same problem with two nodes in Windows 2003 with RAC 10g R2, but I don't have idea to solve.
Please advice me
Thanks advances
regards,
IvanR

Oracle cluster installation problem

hi forums
i need experienced one to discuss with me about this problem and help me to put plan
i install oracle cluster ware 10.2 on my lab
first i install VMWare Workstation 6.5-7x
and i install windows server 2003 and do this configuration
-create 4 scsi harad with size 10 G
-create 5 scsi hard with size 1 g ( 3 for voting dist - 2 for OCR)
- enable automount for windows
- disable sense for new Network card
- 2 network card for public and other for private
- identifying network nodes in the host file
- rename this machin by rac1
- colne this machine and rename it to rac2 and change the public and private ip
----- now i have tow machine rac1,rac2
- check from rac1
cluster media\ckuvfy\runcluvfu.bat stage -pre crsinst -n rac1,rac2 -verbose
was successful
cluster media\ckuvfy\runcluvfu.bat comp ssa -n rac1,rac2
was sc\uccessful
and another check ......................
i begin installing oracle cluster ware
no problem
but after installing on creating cluster configuration assistant it was failed
the question is why this error happen ,although i check on any thing before install !?
i reed more and more and i found this problem happen because terminal service
use this commend
mstsc -v:servername /f - console
but i install local not remote
if any exprince with this please show to me why this error happen !?*
and what is the solution ?
for oracle rac in windows what is the best use VMWare or windows alone ?

Hi,
Check the below link to match your steps and verify according:
http://www.oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnWindows2003UsingVMware.php
For practise and test purpose VMWARE is definetly a better choice.Check the below link which can help
you why it is better to use VMWARE.
http://blogs.vmware.com/performance/2007/11/ten-reasons-why.html
Best regards,
Rafi.
http://rafioracledba.blogspot.com/

10.2.0.1 RHEL 4.0 - root.sh CRS - Failed to upgrade Oracle Cluster Registry

I am trying to install 10.2.0.1 CRS on a 2 node cluster on RHEL 4.0 Nahant Update 7. I get the following errors when root.sh is run
Failed to upgrade Oracle Cluster Registry configuration._
Due to this reason , none of the clusterware background processes fail to start, following which the Configuration Assistant screen also experiences failure (Oracle Notification Server Configuration Assistant).
I tried to apply the 10.2.0.4 patchset also, still same issue. Did anyone see this issue ?
1) We use LINUX DEVICE MAPPER for multipathing and udev
2) We configured the multipathing device partitions and bound them to raw devices
So /dev/mapper/oradisk1 bound to /dev/raw/raw1 ( OCR disk)
and /dev/mapper/oradisk2 bound to /dev/raw/raw2 (VD)
I am able to perform the dd command successfully.
Any ideas ?
-Srinivas

BTW, we our OS is Linux x86-64 with RHEL 4.0 Nahant Update 7. I also applied the patch 4679769.
Did a complete uninstall and reinstall. But issue persists.
-Srinivas

Oracle Cluster and libnnz10 problem - SOLVED!

Hi to all
I have some machines (XServe) with OSX 10.4.9 and Oracle 10.1.0.3.
In all the machines I follow the instructions find in this forum (the relink libnnz10.dylib trick) and all the databases runs very well.
Now I'm trying to instal two machines in cluster mode.
The node 1 is a clean machine. The node 2 is a machine that has a Oracle single instance running.
All the installation in cluster mode runs smooth and I made the same things that in a single instance (like the relink trick).
With all installed, the CRS daemon is running and the listeners is running (I run NETCA before runnig DBCA).
Using the DBCA works fine until the last step - for the database creation, the last script has a shutdown/startup command to run a full recompile of all packages and procedures in the database.
At this moment the installation fails (with end-of-communication channel). Looking in the logs, this is the _dyld libnnz10.dylib error.
Even after the crash in installation, I quit the DBCA and runs SQLPLUS. I connect in the database, try a startup (that fails with the error mentioned), reconnect again and make two commands : alter database mount; alter database open; (and it works).
I do this in the two nodes and the CRS daemon recognizes the running instances (with crs_stat -t I can see all online) and the database is running and in cluster (what I do in one instance appears in the other and the datafiles are the same), including failover tasks (like simulating a node down - the database still running).
But all tries to run the startup/shutdown commands fails. It fails always when the LMON processes try to start.
I recheck the installation, focusing in the relink trick with the libnnz10. When I use DBCA to install a single instance on node 1 or node 2 in the same ORACLE_HOME of the cluster, it runs fine (including startup/shutdown) - this make me think that all the database relink's are fine.
I try to relink the cluster. In installation it uses 4 makes and I redo this makes without the libnnz10. The makes runs well too, but the error continues (only using startup/shutdown in cluster database).
I'm doing the documentation of the process and will post it, but I want to resolve this issue.
Any ideas ?
Thanks to all
Message was edited by:
alliance01

Hi to all.
I downloaded the 10.1.0.5 as soon I can - thanks to damjanp!
After the download, I follow all the instructions.
I stop the database, all the services and the cluster. Run the installer and it works fine.
When I try to make the post-installation tasks, I cannot startup the database (nor with the error that I was having). I received a Oracle Cluster Configuration Error...
I read all the logs and find 3 errors. I do not know if this occurs because of wrong environment variables.
The commands awk, touch and basename fails - the scripts try to find this commands in /bin (this commands in OSX stay in /usr/bin). I prefer make a link (ln -s) using root :
ln -s /usr/bin/awk /bin/awk
ln -s /usr/bin/touch /bin/touch
ln -s /usr/bin/basename /bin/basename
When I done this, the cluster starts (ocssd.bin, crsd.bin e evmd.bin). But when I try to start the database, it fails (ORA-29702 : error occurred in Cluster Group Service operation) and srvctl gives me PRKH-1010 : Unable to communicate with CRS services. [OCR Error(Native : prsr_initCLSS:[21])].
To resolve this I use localconfig (user root) :
localconfig reset /<ORACLE_HOME>
After this, I shutdown all and restart the CRS services - and for my surprise the CRS automaticaly starts all the services (including the instances).
And the libnnz10 problema was gone!
I read the documentation and found that the "TNS - lost contact" problem in Tiger (yeah - Tiger) was resolved.
I think that 10.1.0.5 can runs on Tiger more easily.
The cluster are running fine now - I shutdown/startup the instance several times to test with no errors.
I will prepare a documentation to post in the Web about this installation. When I finish I post in this forum the link.
Thank's to all.

"Oracle Cluster Verification Utility" failed - 10gR2 - VMware - CentOS 4

Hi,
While installing 10g R2 on VMWare with CentOS 4, I am encountering an error:
Command = /u01/crs/oracle/product/10.2.0/crs/bin/cluvfy has failed
INFO: Configuration assistant "Oracle Cluster Verification Utility" failed
*** Starting OUICA ***
Oracle Home set to /u01/crs/oracle/product/10.2.0/crs
Configuration directory is set to /u01/crs/oracle/product/10.2.0/crs/cfgtoollogs. All xml files under the directory will be processed
INFO: The "/u01/crs/oracle/product/10.2.0/crs/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
The logs show me:
COMMAND=/u01/crs/oracle/product/10.2.0/crs/bin/cluvfy stage -post crsinst -n rac1,rac2
Checking the version of OCR...
OCR of correct Version "2" exists.
Checking data integrity of OCR...
ERROR:
OCR integrity results are inconsistent amongst the nodes.
OCR integrity found invalid for nodes: rac2
OCR integrity found valid for nodes: rac1
OCR integrity check failed.
I have replaced "clsfmt.bin" with patch 4679769 to avoid the FAILED TO FORMAT OCR DISK USING CLSFMT error on Node 1.
But still the Oracle Cluster Verification Utility failed with OCR integrity.
Also, have religiously followed the steps mentioned in the below link & didnt have any glitches during the entire process:
http://www.oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnCentos4UsingVMware.php
Any Suggestions??

I kinda dont have that timestamp which you requested.
Posting what i have in crsd.log for node 2.
**I wish this site had an attachment section to make the threads more readable.
Anyways...
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracle. All rights reserved.
2011-06-29 17:56:21.189: [ default][3086931648][ENTER]0
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2004, Oracle. All rights reserved
2011-06-29 17:56:21.189: [ default][3086931648]0CRS Daemon Starting
2011-06-29 17:56:21.190: [ CRSMAIN][3086931648]0Checking the OCR device
2011-06-29 17:56:21.280: [ CRSMAIN][3086931648]0Connecting to the CSS Daemon
2011-06-29 17:56:21.420: [ COMMCRS][66177968]clsc_connect: (0x8655ae0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac2_crs))
2011-06-29 17:56:21.420: [ CSSCLNT][3086931648]clsssInitNative: connect failed, rc 9
2011-06-29 17:56:21.422: [ CRSRTI][3086931648]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2011-06-29 17:56:22.483: [ COMMCRS][66177968]clsc_connect: (0x8604c10) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac2_crs))
2011-06-29 17:56:22.484: [ CSSCLNT][3086931648]clsssInitNative: connect failed, rc 9
2011-06-29 17:56:22.485: [ CRSRTI][3086931648]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2011-06-29 17:56:23.537: [ COMMCRS][66177968]clsc_connect: (0x8654e20) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac2_crs))
2011-06-29 17:56:23.537: [ CSSCLNT][3086931648]clsssInitNative: connect failed, rc 9
2011-06-29 17:56:23.538: [ CRSRTI][3086931648]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2011-06-29 17:56:24.606: [ COMMCRS][66177968]clsc_connect: (0x8655008) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac2_crs))
2011-06-29 17:56:24.606: [ CSSCLNT][3086931648]clsssInitNative: connect failed, rc 9
2011-06-29 17:56:24.608: [ CRSRTI][3086931648]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2011-06-29 17:56:28.445: [    CRSD][3086931648]0Daemon Version: 10.2.0.1.0 Active Version: 10.2.0.1.0
2011-06-29 17:56:28.446: [    CRSD][3086931648]0Active Version and Software Version are same
2011-06-29 17:56:28.446: [ CRSMAIN][3086931648]0Initializing OCR
2011-06-29 17:56:28.479: [ OCRRAW][3086931648]proprioo: for disk 0 (/dev/raw/raw1), id match (1), my id set (1669906634,1028247821) total id sets (1), 1st set (1669906634,1028247821), 2nd set (0,0) my votes (2), total votes (2)
2011-06-29 17:56:28.621: [ CSSCLNT][3051752368]clssgsGroupJoin: CSS has not reached fatal mode.Registration is not yet safe. Retrying
2011-06-29 17:56:29.674: [    CRSD][3086931648]0ENV Logging level for Module: allcomp 0
2011-06-29 17:56:29.680: [    CRSD][3086931648]0ENV Logging level for Module: default 0
2011-06-29 17:56:29.720: [    CRSD][3086931648]0ENV Logging level for Module: COMMCRS 0
2011-06-29 17:56:29.730: [    CRSD][3086931648]0ENV Logging level for Module: COMMNS 0
2011-06-29 17:56:29.746: [    CRSD][3086931648]0ENV Logging level for Module: CRSUI 0
2011-06-29 17:56:29.755: [    CRSD][3086931648]0ENV Logging level for Module: CRSCOMM 0
2011-06-29 17:56:29.760: [    CRSD][3086931648]0ENV Logging level for Module: CRSRTI 0
2011-06-29 17:56:29.770: [    CRSD][3086931648]0ENV Logging level for Module: CRSMAIN 0
2011-06-29 17:56:29.823: [    CRSD][3086931648]0ENV Logging level for Module: CRSPLACE 0
2011-06-29 17:56:29.834: [    CRSD][3086931648]0ENV Logging level for Module: CRSAPP 0
2011-06-29 17:56:29.846: [    CRSD][3086931648]0ENV Logging level for Module: CRSRES 0
2011-06-29 17:56:29.852: [    CRSD][3086931648]0ENV Logging level for Module: CRSOCR 0
2011-06-29 17:56:29.871: [    CRSD][3086931648]0ENV Logging level for Module: CRSTIMER 0
2011-06-29 17:56:29.878: [    CRSD][3086931648]0ENV Logging level for Module: CRSEVT 0
2011-06-29 17:56:29.886: [    CRSD][3086931648]0ENV Logging level for Module: CRSD 0
2011-06-29 17:56:29.904: [    CRSD][3086931648]0ENV Logging level for Module: CLUCLS 0
2011-06-29 17:56:29.916: [    CRSD][3086931648]0ENV Logging level for Module: OCRRAW 0
2011-06-29 17:56:29.928: [    CRSD][3086931648]0ENV Logging level for Module: OCROSD 0
2011-06-29 17:56:29.931: [    CRSD][3086931648]0ENV Logging level for Module: CSSCLNT 0
2011-06-29 17:56:29.936: [    CRSD][3086931648]0ENV Logging level for Module: OCRAPI 0
2011-06-29 17:56:29.939: [    CRSD][3086931648]0ENV Logging level for Module: OCRUTL 0
2011-06-29 17:56:29.942: [    CRSD][3086931648]0ENV Logging level for Module: OCRMSG 0
2011-06-29 17:56:29.945: [    CRSD][3086931648]0ENV Logging level for Module: OCRCLI 0
2011-06-29 17:56:29.948: [    CRSD][3086931648]0ENV Logging level for Module: OCRCAC 0
2011-06-29 17:56:29.951: [    CRSD][3086931648]0ENV Logging level for Module: OCRSRV 0
2011-06-29 17:56:29.954: [    CRSD][3086931648]0ENV Logging level for Module: OCRMAS 0
2011-06-29 17:56:29.954: [ CRSMAIN][3086931648]0Filename is /u01/crs/oracle/product/10.2.0/crs/crs/init/rac2.pid
[ clsdmt][2862934960]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac2DBG_CRSD))
2011-06-29 17:56:29.986: [ CRSMAIN][3086931648]0Using Authorizer location: /u01/crs/oracle/product/10.2.0/crs/crs/auth/
2011-06-29 17:56:30.038: [ CRSMAIN][3086931648]0Initializing RTI
2011-06-29 17:56:30.039: [CRSTIMER][2841689008]0Timer Thread Starting.
2011-06-29 17:56:30.042: [ CRSRES][3086931648]0Parameter SECURITY = 1, running in USER Mode
2011-06-29 17:56:30.043: [ CRSMAIN][3086931648]0Initializing EVMMgr
2011-06-29 17:56:30.045: [ COMMCRS][2831199152]clsc_connect: (0x89a02e0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=SYSTEM.evm.acceptor.auth))
2011-06-29 17:56:30.299: [ COMMCRS][2831199152]clsc_connect: (0x89a2ab8) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=SYSTEM.evm.acceptor.auth))
2011-06-29 17:56:31.555: [ CRSMAIN][3086931648]0CRSD locked during state recovery, please wait.
2011-06-29 17:56:31.603: [ CRSMAIN][3086931648]0CRSD recovered, unlocked.
2011-06-29 17:56:31.606: [ CRSMAIN][3086931648]0QS socket on: (ADDRESS=(PROTOCOL=ipc)(KEY=ora_crsqs))
2011-06-29 17:56:31.620: [ CRSMAIN][3086931648]0CRSD UI socket on: (ADDRESS=(PROTOCOL=ipc)(KEY=CRSD_UI_SOCKET))
2011-06-29 17:56:31.627: [ CRSMAIN][3086931648]0E2E socket on: (ADDRESS=(PROTOCOL=tcp)(HOST=rac2-priv)(PORT=49896))
2011-06-29 17:56:31.627: [ CRSMAIN][3086931648]0Starting Threads
2011-06-29 17:56:31.628: [ CRSMAIN][3086931648]0CRS Daemon Started.
2011-06-29 18:03:02.066: [ CRSRES][2735582128]0Resource Registered: ora.rac1.vip
2011-06-29 18:03:05.949: [ CRSRES][2735582128]0Resource Registered: ora.rac2.vip
2011-06-29 18:03:09.666: [ CRSRES][2735582128]0Resource Registered: ora.rac1.gsd
2011-06-29 18:03:11.523: [ CRSRES][2735582128]0Resource Registered: ora.rac2.gsd
2011-06-29 18:03:13.329: [ CRSRES][2735582128]0Resource Registered: ora.rac1.ons
2011-06-29 18:03:15.048: [ CRSRES][2735582128]0Resource Registered: ora.rac2.ons
2011-06-29 18:03:15.965: [ CRSRES][2714192816]0Attempting to start `ora.rac1.vip` on member `rac1`
2011-06-29 18:03:30.471: [ CRSRES][2714192816]0Start of `ora.rac1.vip` on member `rac1` succeeded.
2011-06-29 18:03:31.227: [ CRSRES][2714192816]0startRunnable: setting CLI values
2011-06-29 18:03:31.258: [ CRSRES][2714192816]0Attempting to start `ora.rac2.vip` on member `rac2`
2011-06-29 18:03:44.710: [ CRSRES][2714192816]0Start of `ora.rac2.vip` on member `rac2` succeeded.
2011-06-29 18:03:45.588: [ CRSRES][2714192816]0Attempting to start `ora.rac1.gsd` on member `rac1`
2011-06-29 18:03:45.777: [ CRSRES][2714192816]0Start of `ora.rac1.gsd` on member `rac1` succeeded.
2011-06-29 18:03:46.523: [ CRSRES][2714192816]0startRunnable: setting CLI values
2011-06-29 18:03:46.588: [ CRSRES][2714192816]0Attempting to start `ora.rac2.gsd` on member `rac2`
2011-06-29 18:03:47.220: [ CRSRES][2714192816]0Start of `ora.rac2.gsd` on member `rac2` succeeded.
2011-06-29 18:03:48.077: [ CRSRES][2714192816]0Attempting to start `ora.rac1.ons` on member `rac1`
2011-06-29 18:03:49.727: [ CRSRES][2714192816]0Start of `ora.rac1.ons` on member `rac1` succeeded.
2011-06-29 18:03:50.610: [ CRSRES][2714192816]0startRunnable: setting CLI values
2011-06-29 18:03:50.658: [ CRSRES][2714192816]0Attempting to start `ora.rac2.ons` on member `rac2`
2011-06-29 18:03:52.240: [ CRSRES][2714192816]0Start of `ora.rac2.ons` on member `rac2` succeeded.
2011-06-29 18:07:44.810: [ CRSRES][2735582128]0startRunnable: setting CLI values
2011-06-29 18:09:05.613: [ CRSAPP][2735582128]0CheckResource error for ora.rac1.vip error code = 1
2011-06-29 18:09:05.623: [ CRSRES][2735582128]0In stateChanged, ora.rac1.vip target is ONLINE
2011-06-29 18:09:05.623: [ CRSRES][2735582128]0ora.rac1.vip on rac2 went OFFLINE unexpectedly
2011-06-29 18:09:05.624: [ CRSRES][2735582128]0StopResource: setting CLI values
2011-06-29 18:09:05.631: [ CRSRES][2735582128]0Attempting to stop `ora.rac1.vip` on member `rac2`
2011-06-29 18:09:09.437: [ CRSRES][2735582128]0Stop of `ora.rac1.vip` on member `rac2` succeeded.
2011-06-29 18:09:09.438: [ CRSRES][2735582128]0ora.rac1.vip RESTART_COUNT=0 RESTART_ATTEMPTS=0
2011-06-29 18:09:09.447: [ CRSRES][2735582128]0ora.rac1.vip failed on rac2 relocating.
2011-06-29 18:09:09.685: [ CRSRES][2735582128]0Attempting to start `ora.rac1.vip` on member `rac1`
2011-06-29 18:09:22.340: [ CRSRES][2735582128]0Start of `ora.rac1.vip` on member `rac1` succeeded.
2011-06-29 18:10:21.884: [ CRSAPP][2735582128]0CheckResource error for ora.rac2.vip error code = 1
2011-06-29 18:10:21.892: [ CRSRES][2735582128]0In stateChanged, ora.rac2.vip target is ONLINE
2011-06-29 18:10:21.893: [ CRSRES][2735582128]0ora.rac2.vip on rac2 went OFFLINE unexpectedly
2011-06-29 18:10:21.893: [ CRSRES][2735582128]0StopResource: setting CLI values
2011-06-29 18:10:21.910: [ CRSRES][2735582128]0Attempting to stop `ora.rac2.vip` on member `rac2`
2011-06-29 18:10:25.645: [ CRSRES][2735582128]0Stop of `ora.rac2.vip` on member `rac2` succeeded.
2011-06-29 18:10:25.645: [ CRSRES][2735582128]0ora.rac2.vip RESTART_COUNT=0 RESTART_ATTEMPTS=0
2011-06-29 18:10:25.657: [ CRSRES][2735582128]0ora.rac2.vip failed on rac2 relocating.
2011-06-29 18:10:25.938: [ CRSRES][2735582128]0Attempting to start `ora.rac2.vip` on member `rac1`
2011-06-29 18:10:39.079: [ CRSRES][2735582128]0Start of `ora.rac2.vip` on member `rac1` succeeded.
2011-06-29 18:11:39.443: [ CRSRES][2735582128]0startRunnable: setting CLI values
2011-06-29 18:11:52.836: [ OCRUTL][3009792944]u_freem: mem passed is null
2011-06-29 18:12:59.776: [ CRSAPP][2735582128]0CheckResource error for ora.rac1.vip error code = 1
2011-06-29 18:12:59.784: [ CRSRES][2735582128]0In stateChanged, ora.rac1.vip target is ONLINE
2011-06-29 18:12:59.784: [ CRSRES][2735582128]0ora.rac1.vip on rac2 went OFFLINE unexpectedly
2011-06-29 18:12:59.784: [ CRSRES][2735582128]0StopResource: setting CLI values
2011-06-29 18:12:59.791: [ CRSRES][2735582128]0Attempting to stop `ora.rac1.vip` on member `rac2`
2011-06-29 18:13:03.395: [ CRSRES][2735582128]0Stop of `ora.rac1.vip` on member `rac2` succeeded.
2011-06-29 18:13:03.396: [ CRSRES][2735582128]0ora.rac1.vip RESTART_COUNT=0 RESTART_ATTEMPTS=0
2011-06-29 18:13:03.404: [ CRSRES][2735582128]0ora.rac1.vip failed on rac2 relocating.
2011-06-29 18:13:03.678: [ CRSRES][2735582128]0Attempting to start `ora.rac1.vip` on member `rac1`
2011-06-29 18:13:16.047: [ CRSRES][2735582128]0Start of `ora.rac1.vip` on member `rac1` succeeded.
2011-06-29 18:15:07.356: [ CRSRES][2735582128]0startRunnable: setting CLI values
2011-06-29 18:26:36.393: [ CRSAPP][2735582128]0CheckResource error for ora.rac2.vip error code = 1
2011-06-29 18:26:36.404: [ CRSRES][2735582128]0In stateChanged, ora.rac2.vip target is ONLINE
2011-06-29 18:26:36.404: [ CRSRES][2735582128]0ora.rac2.vip on rac2 went OFFLINE unexpectedly
2011-06-29 18:26:36.405: [ CRSRES][2735582128]0StopResource: setting CLI values
2011-06-29 18:26:36.420: [ CRSRES][2735582128]0Attempting to stop `ora.rac2.vip` on member `rac2`
2011-06-29 18:26:40.105: [ CRSRES][2735582128]0Stop of `ora.rac2.vip` on member `rac2` succeeded.
2011-06-29 18:26:40.106: [ CRSRES][2735582128]0ora.rac2.vip RESTART_COUNT=0 RESTART_ATTEMPTS=0
2011-06-29 18:26:40.114: [ CRSRES][2735582128]0ora.rac2.vip failed on rac2 relocating.
2011-06-29 18:26:40.411: [ CRSRES][2735582128]0Attempting to start `ora.rac2.vip` on member `rac1`
2011-06-29 18:26:53.678: [ CRSRES][2735582128]0Start of `ora.rac2.vip` on member `rac1` succeeded.
2011-06-29 18:28:03.601: [ CRSRES][2735582128]0startRunnable: setting CLI values
2011-06-29 18:28:22.695: [ CRSAPP][2735582128]0StartResource error for ora.rac2.vip error code = 1
2011-06-29 18:28:44.847: [ CRSRES][2735582128]0startRunnable: setting CLI values
2011-06-29 18:29:06.589: [ OCRUTL][2946853808]u_freem: mem passed is null
2011-06-29 18:30:13.581: [ CRSAPP][2735582128]0CheckResource error for ora.rac1.vip error code = 1
2011-06-29 18:30:13.598: [ CRSRES][2735582128]0In stateChanged, ora.rac1.vip target is ONLINE
2011-06-29 18:30:13.599: [ CRSRES][2735582128]0ora.rac1.vip on rac2 went OFFLINE unexpectedly
2011-06-29 18:30:13.599: [ CRSRES][2735582128]0StopResource: setting CLI values
2011-06-29 18:30:13.606: [ CRSRES][2735582128]0Attempting to stop `ora.rac1.vip` on member `rac2`
2011-06-29 18:30:17.227: [ CRSRES][2735582128]0Stop of `ora.rac1.vip` on member `rac2` succeeded.
2011-06-29 18:30:17.228: [ CRSRES][2735582128]0ora.rac1.vip RESTART_COUNT=0 RESTART_ATTEMPTS=0
2011-06-29 18:30:17.236: [ CRSRES][2735582128]0ora.rac1.vip failed on rac2 relocating.
2011-06-29 18:30:17.563: [ CRSRES][2735582128]0Attempting to start `ora.rac1.vip` on member `rac1`
2011-06-29 18:30:31.358: [ CRSRES][2735582128]0Start of `ora.rac1.vip` on member `rac1` succeeded.
2011-06-29 18:33:54.570: [ CRSRES][2735582128]0startRunnable: setting CLI values
2011-06-29 18:34:17.302: [ OCRUTL][2988813232]u_freem: mem passed is null
2011-06-29 18:35:24.403: [ CRSAPP][2735582128]0CheckResource error for ora.rac1.vip error code = 1
2011-06-29 18:35:24.412: [ CRSRES][2735582128]0In stateChanged, ora.rac1.vip target is ONLINE
2011-06-29 18:35:24.412: [ CRSRES][2735582128]0ora.rac1.vip on rac2 went OFFLINE unexpectedly
2011-06-29 18:35:24.412: [ CRSRES][2735582128]0StopResource: setting CLI values
2011-06-29 18:35:24.431: [ CRSRES][2735582128]0Attempting to stop `ora.rac1.vip` on member `rac2`
2011-06-29 18:35:28.186: [ CRSRES][2735582128]0Stop of `ora.rac1.vip` on member `rac2` succeeded.
2011-06-29 18:35:28.187: [ CRSRES][2735582128]0ora.rac1.vip RESTART_COUNT=0 RESTART_ATTEMPTS=0
2011-06-29 18:35:28.208: [ CRSRES][2735582128]0ora.rac1.vip failed on rac2 relocating.
2011-06-29 18:35:28.510: [ CRSRES][2735582128]0Attempting to start `ora.rac1.vip` on member `rac1`
2011-06-29 18:35:52.388: [ CRSRES][2735582128]0Start of `ora.rac1.vip` on member `rac1` succeeded.
2011-06-29 18:39:18.464: [ CRSRES][2735582128]0startRunnable: setting CLI values
2011-06-29 18:39:31.876: [ OCRUTL][2988813232]u_freem: mem passed is null
2011-06-29 18:40:38.956: [ CRSAPP][2735582128]0CheckResource error for ora.rac1.vip error code = 1
2011-06-29 18:40:38.965: [ CRSRES][2735582128]0In stateChanged, ora.rac1.vip target is ONLINE
2011-06-29 18:40:38.966: [ CRSRES][2735582128]0ora.rac1.vip on rac2 went OFFLINE unexpectedly
2011-06-29 18:40:38.966: [ CRSRES][2735582128]0StopResource: setting CLI values
2011-06-29 18:40:38.972: [ CRSRES][2735582128]0Attempting to stop `ora.rac1.vip` on member `rac2`
2011-06-29 18:40:42.583: [ CRSRES][2735582128]0Stop of `ora.rac1.vip` on member `rac2` succeeded.
2011-06-29 18:40:42.584: [ CRSRES][2735582128]0ora.rac1.vip RESTART_COUNT=0 RESTART_ATTEMPTS=0
2011-06-29 18:40:42.594: [ CRSRES][2735582128]0ora.rac1.vip failed on rac2 relocating.
2011-06-29 18:40:42.977: [ CRSRES][2735582128]0Attempting to start `ora.rac1.vip` on member `rac1`
2011-06-29 18:41:08.149: [ CRSRES][2735582128]0Start of `ora.rac1.vip` on member `rac1` succeeded.
2011-06-29 18:42:18.061: [ CRSRES][2735582128]0startRunnable: setting CLI values
2011-06-29 18:42:31.531: [ OCRUTL][2988813232]u_freem: mem passed is null
2011-06-29 18:44:45.499: [ CRSAPP][2735582128]0CheckResource error for ora.rac1.vip error code = 1
2011-06-29 18:44:45.507: [ CRSRES][2735582128]0In stateChanged, ora.rac1.vip target is ONLINE
2011-06-29 18:44:45.508: [ CRSRES][2735582128]0ora.rac1.vip on rac2 went OFFLINE unexpectedly
2011-06-29 18:44:45.508: [ CRSRES][2735582128]0StopResource: setting CLI values
2011-06-29 18:44:45.516: [ CRSRES][2735582128]0Attempting to stop `ora.rac1.vip` on member `rac2`
2011-06-29 18:44:49.197: [ CRSRES][2735582128]0Stop of `ora.rac1.vip` on member `rac2` succeeded.
2011-06-29 18:44:49.198: [ CRSRES][2735582128]0ora.rac1.vip RESTART_COUNT=0 RESTART_ATTEMPTS=0
2011-06-29 18:44:49.209: [ CRSRES][2735582128]0ora.rac1.vip failed on rac2 relocating.
2011-06-29 18:44:49.449: [ CRSRES][2735582128]0Attempting to start `ora.rac1.vip` on member `rac1`
2011-06-29 18:45:13.509: [ CRSRES][2735582128]0Start of `ora.rac1.vip` on member `rac1` succeeded.
2011-06-29 18:47:31.668: [ CRSRES][2735582128]0startRunnable: setting CLI values
2011-06-29 18:47:50.804: [ CRSAPP][2735582128]0StartResource error for ora.rac1.vip error code = 1

Failed to upgrade Oracle Cluster Registry configuration

I'm making a new installation of Oracle RAC environment, the clusterware version is 10 and therefore the RDBMS, I'm using oracle linux 5 update 7, the installation is being performed on only one machine. The problem occurs at the end of the installation when I try to run / u01/app/oracle/product/10.2.0/crs/root.sh the error messages are:
Failed to upgrade Oracle Cluster Registry configuration, which is issued shortly after the execution of root.sh.
And in the log the error message is:
31/10/2011 11:36:36.654: [OCRCONF] [103401184] ocrconfig starts ...
31/10/2011 11:36:36.654: [OCRCONF] [103401184] Upgrading OCR data
31/10/2011 11:36:36.661: [OCRCONF] [103401184] OCR Already in current version.
31/10/2011 11:36:36.669: [OCRCONF] [103401184] Failed to call clsssinit (21)
31/10/2011 11:36:36.670: [OCRCONF] [103401184] Failed to make a backup copy of OCR
31/10/2011 11:36:36.670: [OCRCONF] [103401184] Exiting [status = failed] ...
If anyone has faced this error and won, I'm accepting suggestions.
Att.
Italo Moisés dos Santos.

Hi;
For your issue i suggest close your thread here as changing thread status to answered and move it to Forum Home » Grid Computing » RAC, ASM & Clusterware Installation which you can get more quick response
Regard
Helios

Cannot configure Oracle Cluster File System (OCFS2)

Dears,,
While trying to use ocfs2console to Configure Oracle Cluster File System (OCFS2)
Error appear to me as following:
Could not start cluster stack error.This must be resolved before any OCFS2 filesystem can be mounted.
How can solve this please?
thanks & regards,,

Dear all ,,
My issue solved now . . .
Really , it is strange.
Once , i added /sbin in .bash_profile under ~ Directory as following . . .
export PATH=$ORACLE_HOME/bin:$ORA_CRS_HOME/bin:/bin:/usr/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11R6/bin
Then log out then back again.
After this change , i able to run ocfs2console successfully.
Hope this help you.
Thanks for all,,
Best regards,,

FATAL [INS-41311] One or more Oracle Cluster Registry (OCR) locations spec

I'm installing 11.2.0.3 Grid Infrastructure on Red Hat 5.7. I'm receiving the following error that I pasted below. There isn't a whole lot of information regarding it. It seems that the install sees an existing CRS install, but the NFS volumes are empty. This is a fresh install. I ran cleanup, but there's nothing to remove. Any help or insight will be appreciated.
Thank you
INFO: Checking path: /u02/udev/devices/ocr1
INFO: Checking path: /u03/udev/devices/ocr2
INFO: Checking path: /u04/udev/devices/ocr3
INFO: Validating for writability
INFO: Validating for valid OCR locations
INFO: Validating OCR locations.
INFO: validating if it is an existing directory.
INFO: Validating for free space
INFO: PATH has :==>/tmp/OraInstall2012-03-31_12-30-37AM/jdk/jre/lib/amd64/server:/tmp/OraInstall2012-03-31_12-30-37AM/jdk/jre/lib/amd64:/tmp/OraInstall2012-03-31_12-30-37AM/jdk/jre/../lib/amd64
INFO: PATH has :==>/tmp/OraInstall2012-03-31_12-30-37AM/jdk/jre/lib/amd64/server:/tmp/OraInstall2012-03-31_12-30-37AM/jdk/jre/lib/amd64:/tmp/OraInstall2012-03-31_12-30-37AM/jdk/jre/../lib/amd64
INFO: PATH has :==>/tmp/OraInstall2012-03-31_12-30-37AM/jdk/jre/lib/amd64/server:/tmp/OraInstall2012-03-31_12-30-37AM/jdk/jre/lib/amd64:/tmp/OraInstall2012-03-31_12-30-37AM/jdk/jre/../lib/amd64
SEVERE: [FATAL] [INS-41311] One or more Oracle Cluster Registry (OCR) locations specified are in an existing OCR directory.
CAUSE: One or more Oracle Cluster Registry (OCR) locations specified were in directories with existing OCR files.
ACTION: Specify locations for Oracle Cluster Registry that are not in use.
INFO: Advice is ABORT

user12006502 wrote:
These are NFS mounts off of NetApp NAS. They are volumes that don't contain anything else but an empty .snapshot subdirectory. This is my first NFS RAC implementation. We followed NetApps best practices for the NFS mount options as well as the export options on the NAS. I'm sort of lost as to what the problem could be. Ran the installer with debug and strace, but I'm still not getting any insight into the issue. Thanks for trying to help.
My first reaction to the failed CRS install is to clean it up. I ran the cleanup steps, but the installer didn't get far enough to generate any files.
I'm using the following NFS mount options:
rw,bg,hard,nointr,rsize=32768,wsize=32768,tcp,vers=3,timeo=600,noac,suidUse rw,bg,hard,nointr,rsize=32768,wsize=32768,tcp,noac,actimeo=0,vers=3,timeo=600 for Mount points for CRS voting disk and OCR
Doc id - Mount Options for Oracle files when used with NFS on NAS devices [ID 359515.1]

ERROR: ORACLE prepare error: ORA-00936: missing expression

Hello,
I am required to run "pass-through" Oracle SQL, to extract data from tables into SAS for processing and manipulation. My code (attached) reads and writes (executes) but with zero records to test first. I cannot get past the Prepare Error.
The query is very much like other queries that seem to work, but I cannot get past this prepare error. I have no other access to individauls with adequate knowledge of PL SQL, and as a last stop hoped others in the forum could quickly spot the source of errror.
Thanks very much in advance for any assistance.
Jeff
1 ;*';*";*/;quit;run;
2 OPTIONS PAGENO=MIN;
3 %LET _CLIENTTASKLABEL=%NRBQUOTE(rx_biplr_v3_2);
4 %LET _EGTASKLABEL=%NRBQUOTE(rx_biplr_v3_2);
5 %LET _CLIENTPROJECTNAME=%NRBQUOTE();
6 %LET _SASPROGRAMFILE=;
7
8 ODS _ALL_ CLOSE;
NOTE: Some of your options or statements may not be supported with the Activex or Java series of devices. Graph defaults for these
drivers may be different from other SAS/GRAPH device drivers. For further information, please contact Technical Support.
9 OPTIONS DEV=ACTIVEX;
10 FILENAME EGHTML TEMP;
NOTE: Writing HTML(EGHTML) Body file: EGHTML
11 ODS HTML(ID=EGHTML) FILE=EGHTML ENCODING='utf-8' STYLE=EGDefault
11 ! STYLESHEET=(URL="file:///C:/Program%20Files/SAS/Shared%20Files/BIClientStyles/EGDefault.css")
11 ! ATTRIBUTES=("CODEBASE"="http://www2.sas.com/codebase/graph/v91/sasgraph.exe") NOGTITLE NOGFOOTNOTE GPATH=&sasworklocation
11 ! ;
12
13 %gaccessible;
14 /********************************************************/
15 * RX_BIPLR_V3.SAS ;
16 /********************************************************/
17
18 dm 'log;clear;out;clear';
19 options linesize =120;
20 Option obs=0 NoReplace;
21
22 ****************************************************************************************;
23 *Date Programmer Reviewed By WHAT WAS DONE;
24 *----- -------------- ------------ -----------------------------------------;
25 *2005 David Boyd Program creation for test population;
26 *;
27 *02/06/2006 Ivon Jones Modified to include total population;
28 *;
29 *07/20/2006 Ivon Jones Identified data elements for exclusion;
30 * or inclusion for consolidation with ;
31 * Robin's report;
32 *;
33 *08/18/2006 Ivon Jones Updated the Specific Therapeutic Classes;
34 * 10-2009 J Shaf - modified to extract actual or potential Bipolar Dx from UBH and Medical Claims;
35 ****************************************************************************************;
36
37
38
39 *%let allclmorgn = ('M','A') ; /* all claims origin code */
40 %let begdate='01SEP2009'd;
41 %let enddate='30SEP2009'd;
42 %let q = %str(%') ;
43
44
45 data _null_ ;
46 call symput('fdos',put(intnx('month',"&begdate"d,-27,'beginning'), date9.) ) ;
47 call symput('ldos',put(intnx('month',"&enddate"d,-0,'ending'), date9.) ) ;
48 run ;
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
2 The SAS System 11:44 Friday, October 30, 2009
cpu time 0.01 seconds
49
50
51
52 **************************************************************;
53 * ??Use the data _null_ step to create a macro variable for the ;
54 * year and month based on the ldos macro variable in the data ;
55 * step above?? ;
56 **************************************************************;
57
58
59 data _null_ ;
60 if month("&ldos"d) < 10
61 then call symput('yr_mo',compress(year("&ldos"d) || '0' || month("&ldos"d) ) ) ;
62 else call symput('yr_mo',compress(year("&ldos"d) || month("&ldos"d) ) ) ;
63 run ;
NOTE: Numeric values have been converted to character values at the places given by: (Line):(Column).
61:39 61:64 62:39 62:57
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
cpu time 0.00 seconds
64
65 *%put &biplr_dx;
66 %put &begdate ;
'01SEP2009'd
67 %put &enddate ;
'30SEP2009'd
68 %put &fdos ;
01JUN2007
69 %put &ldos ;
30SEP2009
70 %put &q ;
71
72
73 libname biplr'/home/jshafi01/projects/adhoc/biplr_dprsn/data';
NOTE: Libref BIPLR was successfully assigned as follows:
Engine: V9
Physical Name: /home/jshafi01/projects/adhoc/biplr_dprsn/data
74 libname rosdwp oracle user="&oracle_user." pass="&oracle_pass." buffsize=32767 path='rosdwp';
NOTE: Libref ROSDWP was successfully assigned as follows:
Engine: ORACLE
Physical Name: rosdwp
75
76 data work.biplr_up_v1;
77 attrib mbr_id length=$26;
78 set biplr.biplr_ubh_med_v1;
79 run;
NOTE: There were 0 observations read from the data set BIPLR.BIPLR_UBH_MED_V1.
NOTE: The data set WORK.BIPLR_UP_V1 has 0 observations and 1 variables.
NOTE: DATA statement used (Total process time):
real time 0.01 seconds
3 The SAS System 11:44 Friday, October 30, 2009
cpu time 0.00 seconds
80
81 proc contents;
82 run;
NOTE: PROCEDURE CONTENTS used (Total process time):
real time 0.03 seconds
cpu time 0.03 seconds
83
84 proc datasets
85      library = rosdwp nolist;
86      delete biplr_up_v1;
87 quit;
NOTE: Deleting ROSDWP.BIPLR_UP_V1 (memtype=DATA).
NOTE: PROCEDURE DATASETS used (Total process time):
real time 3.74 seconds
cpu time 0.03 seconds
88
89 proc datasets
90      library=work nolist;
91      copy out = rosdwp move;
92      select biplr_up_v1 ;
93 quit;
NOTE: Moving WORK.BIPLR_UP_V1 to ROSDWP.BIPLR_UP_V1 (memtype=DATA).
NOTE: SAS variable labels, formats, and lengths are not written to DBMS tables.
NOTE: There were 0 observations read from the data set WORK.BIPLR_UP_V1.
NOTE: The data set ROSDWP.BIPLR_UP_V1 has 0 observations and 1 variables.
NOTE: PROCEDURE DATASETS used (Total process time):
real time 0.32 seconds
cpu time 0.04 seconds
94
95
96
97 *****************************************************************************;
98
99 *execute(commit) by rosdwp
100 ******************************************************************************;
101
102
103 proc SQL noprint ;
104 connect to oracle as rosdwp (user="&oracle_user." password="&oracle_pass" buffsize=32767 path='rosdwp'
104 ! preserve_comments);
105      execute(alter session set nls_date_format = 'ddmonyyyy') by rosdwp;
106 CREATE table biplr_rx as
107 SELECT
108 mrb_id,
109 pcp_spc,
110 rx_date,
4 The SAS System 11:44 Friday, October 30, 2009
111 brand,
112 generic,
113 ahfs_cd,
114 ahfs_dsc,
115 lbl,
116 strngth,
117 unt,
118 spc_tx_cls_cd,
119 spc_tx_cls_dsc,
120 gcn,
121 rx_num,
122 rx_ingrd,
123 rx_paid,
124 rx_cnt,
125 rx_qty,
126 rx_day
127 FROM connection to rosdwp
128 (SELECT
129 mid.UNIQ_MBR_ID as mrb_id,
130 pd.PRVDR_SPCLTY_DESC as pcp_spc,
131 pcf.LAST_SRVC_DT as rx_date,
132 dd.BRAND_NAME as brand,
133 dd.GNRC_NAME as generic,
134 dd.AHFS_THRPTC_CLS_CD as ahfs_cd,
135 dd.AHFS_THRPTC_CLS_DESC as ahfs_dsc,
136 dd.LABEL_NAME as lbl,
137 dd.STRNGTH_NUM as strngth,
138 dd.STRNGTH_UNIT_DESC as unt,
139 dd.SPECF_THRPTC_CLS_CD as spc_tx_cls_cd,
140 dd.SPECF_THRPTC_CLS_DESC as spc_tx_cls_dsc,
141 dd.GCN_NUM as gcn,
142 pcf.PRSCRPTN_NUM as rx_num,
143 SUM(pcf.INGRDNT_AMT) as rx_ingrd,
144 SUM(pcf.PD_AMT) as rx_paid,
145 SUM(pcf.UNIT_SRVC_CNT) as rx_cnt,
146 SUM(pcf.DSPNSD_QTY) as rx_qty,
147 SUM(pcf.DAY_SUPLY_CNT) as rx_day
148 FROM
149 PHRMCY_CLM_FACT pcf,
150 MBR_ID_DMNSN mid,
151 DRUG_DMNSN dd,
152 PRVDR_DMNSN pd,
153           biplr_up_v1
154 WHERE
155 (
156 (biplr_up_v1.mbr_id = MBR_ID_DMNSN.UNIQ_MBR_ID) And
157 (PHRMCY_CLM_FACT.FINL_CLM_KEY = PHRMCY_FINL_CLM_DMNSN.FINL_CLM_KEY) AND
158 (PHRMCY_CLM_FACT.MBR_KEY = MBR_ID_DMNSN.MBR_KEY) And
159 (PHRMCY_CLM_FACT.BNFT_KEY = MBR_BNFT_DMNSN.BNFT_KEY) And
160 (PHRMCY_CLM_FACT.DRUG_KEY = DRUG_DMNSN.DRUG_KEY) And
161 (PHRMCY_FINL_CLM_DMNSN.CLM_ORGN_CD IN ('M','A')) AND
162 (PHRMCY_CLM_FACT.LAST_SRVC_DT BETWEEN between &q.&fdos.&q and &q.&ldos.&q)
163      )
164 Group By
165 mid.UNIQ_MBR_ID ,
166 pd.PRVDR_SPCLTY_DESC ,
167 pcf.LAST_SRVC_DT ,
168 dd.BRAND_NAME ,
5 The SAS System 11:44 Friday, October 30, 2009
169 dd.GNRC_NAME ,
170 dd.AHFS_THRPTC_CLS_CD ,
171 dd.AHFS_THRPTC_CLS_DESC ,
172 dd.LABEL_NAME ,
173 dd.STRNGTH_NUM ,
174 dd.STRNGTH_UNIT_DESC ,
175 dd.SPECF_THRPTC_CLS_CD ,
176 dd.SPECF_THRPTC_CLS_DESC ,
177 dd.GCN_NUM ,
178 pcf.PRSCRPTN_NUM
179 );
ERROR: ORACLE prepare error: ORA-00936: missing expression. SQL statement: SELECT mid.UNIQ_MBR_ID as mrb_id,
pd.PRVDR_SPCLTY_DESC as pcp_spc, pcf.LAST_SRVC_DT as rx_date, dd.BRAND_NAME as brand, dd.GNRC_NAME as generic,
dd.AHFS_THRPTC_CLS_CD as ahfs_cd, dd.AHFS_THRPTC_CLS_DESC as ahfs_dsc, dd.LABEL_NAME as lbl, dd.STRNGTH_NUM as
strngth, dd.STRNGTH_UNIT_DESC as unt, dd.SPECF_THRPTC_CLS_CD as spc_tx_cls_cd, dd.SPECF_THRPTC_CLS_DESC as
spc_tx_cls_dsc, dd.GCN_NUM as gcn, pcf.PRSCRPTN_NUM as rx_num, SUM(pcf.INGRDNT_AMT) as rx_ingrd, SUM(pcf.PD_AMT)
as rx_paid, SUM(pcf.UNIT_SRVC_CNT) as rx_cnt, SUM(pcf.DSPNSD_QTY) as rx_qty, SUM(pcf.DAY_SUPLY_CNT) as rx_day
FROM PHRMCY_CLM_FACT pcf, MBR_ID_DMNSN mid, DRUG_DMNSN dd, PRVDR_DMNSN pd, biplr_up_v1 WHERE (
(biplr_up_v1.mbr_id = MBR_ID_DMNSN.UNIQ_MBR_ID) And (PHRMCY_CLM_FACT.FINL_CLM_KEY =
PHRMCY_FINL_CLM_DMNSN.FINL_CLM_KEY) AND (PHRMCY_CLM_FACT.MBR_KEY = MBR_ID_DMNSN.MBR_KEY) And
(PHRMCY_CLM_FACT.BNFT_KEY = MBR_BNFT_DMNSN.BNFT_KEY) And (PHRMCY_CLM_FACT.DRUG_KEY = DRUG_DMNSN.DRUG_KEY) And
(PHRMCY_FINL_CLM_DMNSN.CLM_ORGN_CD IN ('M','A')) AND (PHRMCY_CLM_FACT.LAST_SRVC_DT BETWEEN between '01JUN2007'
and '30SEP2009') ) Group By mid.UNIQ_MBR_ID , pd.PRVDR_SPCLTY_DESC , pcf.LAST_SRVC_DT , dd.BRAND_NAME ,
dd.GNRC_NAME , dd.AHFS_THRPTC_CLS_CD , dd.AHFS_THRPTC_CLS_DESC , dd.LABEL_NAME , dd.STRNGTH_NUM ,
dd.STRNGTH_UNIT_DESC , dd.SPECF_THRPTC_CLS_CD , dd.SPECF_THRPTC_CLS_DESC , dd.GCN_NUM , pcf.PRSCRPTN_NUM.
NOTE: PROC SQL set option NOEXEC and will continue to check the syntax of statements.
180 execute (drop table biplr_up_v1) by rosdwp;
NOTE: Statement not executed due to NOEXEC option.
181 disconnect from rosdwp;
NOTE: Statement not executed due to NOEXEC option.
182 quit;
NOTE: The SAS System stopped processing this step because of errors.
NOTE: PROCEDURE SQL used (Total process time):
real time 0.14 seconds
cpu time 0.03 seconds
183
184

Hello Again ,
Wish Oracle was a bit more informative. Am using a SAS Institute Product called Enterprise Guide. A "hot fix" was installed to address an issue that the product appears unable to save the latest version of edited code changes (hence " BETWEEN between" remaining even after a prior edit). In any case, with the change, am now receiving this error:
" ERROR: ORACLE prepare error: ORA-00904: "PHRMCY_CLM_FACT"."LAST_SRVC_DT": invalid identifier". (Log file appears below)
-The error remains, regardless of whether one uses "pass through" code to pass the date range to Oracle (which looks ok from the log output below I believe), or if I hard code the date range into the PL SQL query itself.
-The Prepare error always appears at end of the inner SELECT.
-The Prepare error remains, with or without the GROUP BY clause.
Is there anything else here I am missing? Someone suggested a reserve word - but from other ANSI SQL versions, I do not see that is the case. I have consulted SAS Tech Support and SAS List Serve at University of GA. but nothing definitive from these sources. Have requested facility to be able to run Oracle directly, outside this SAS Institute product - in process.
Any suggestions are greatly appreciated. Thanks to everyone very much.
Jeff
14 /********************************************************/
15 * RX_BIPLR_V3.SAS ;
16 /********************************************************/
17
18 dm 'log;clear;out;clear';
19 options linesize =120;
20 Option obs=0 NoReplace;
21
22 ****************************************************************************************;
23 *Date       Programmer         Reviewed By     WHAT WAS DONE;
24 *-----      --------------     ------------    -----------------------------------------;
25 *2005 D. Boyd Program creation for test population;
26 *;
27 *02/06/2006 I. Jones Modified to include total population;
28 *;
29 *07/20/2006 I. Jones Identified data elements for exclusion;
30 * or inclusion for consolidation with ;
31 * Robin's report;
32 *;
33 *08/18/2006 I Jones Updated the Specific Therapeutic Classes;
34 * 10-2009 J Shaf - modified to extract actual or potential Bipolar Dx from UBH and Medical Claims;
35 ****************************************************************************************;
36
37
38
39 *%let allclmorgn = ('M','A') ; /* all claims origin code */
40 %let begdate='01SEP2009'd;
41 %let enddate='30SEP2009'd;
42 %let q = %str(%') ;
43
44
45 data null ;
46 call symput('fdos',put(intnx('month',"&begdate"d,-27,'beginning'), date9.) ) ;
47 call symput('ldos',put(intnx('month',"&enddate"d,-0,'ending'), date9.) ) ;
48 run ;
2 The SAS System 12:46 Monday, November 2, 2009
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
cpu time 0.00 seconds
49
50
51
52 **************************************************************;
53 * ??Use the data null step to create a macro variable for the ;
54 * year and month based on the ldos macro variable in the data ;
55 * step above?? ;
56 **************************************************************;
57
58
59 data null ;
60 if month("&ldos"d) < 10
61 then call symput('yr_mo',compress(year("&ldos"d) || '0' || month("&ldos"d) ) ) ;
62 else call symput('yr_mo',compress(year("&ldos"d) || month("&ldos"d) ) ) ;
63 run ;
NOTE: Numeric values have been converted to character values at the places given by: (Line):(Column).
61:39 61:64 62:39 62:57
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
cpu time 0.01 seconds
64
65 *%put &biplr_dx;
66 %put &begdate ;
'01SEP2009'd
67 %put &enddate ;
'30SEP2009'd
68 %put &fdos ;
01JUN2007
69 %put &ldos ;
30SEP2009
70 %put &q ;
71
72
73 libname biplr'/home/jshafi01/projects/adhoc/biplr_dprsn/data';
NOTE: Libref BIPLR was successfully assigned as follows:
Engine: V9
Physical Name: /home/jshafi01/projects/adhoc/biplr_dprsn/data
74 libname rosdwp oracle user="&oracle_user." pass="&oracle_pass." buffsize=32767 path='rosdwp';
NOTE: Libref ROSDWP was successfully assigned as follows:
Engine: ORACLE
Physical Name: rosdwp
75
76 data work.biplr_up_v1;
77 attrib mbr_id length=$26;
78 set biplr.biplr_ubh_med_v1;
79 run;
NOTE: There were 0 observations read from the data set BIPLR.BIPLR_UBH_MED_V1.
NOTE: The data set WORK.BIPLR_UP_V1 has 0 observations and 1 variables.
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
cpu time 0.01 seconds
80
81 proc contents;
82 run;
NOTE: PROCEDURE CONTENTS used (Total process time):
real time 0.02 seconds
cpu time 0.02 seconds
83
84 proc datasets
85      library = rosdwp nolist;
86      delete biplr_up_v1;
87 quit;
NOTE: Deleting ROSDWP.BIPLR_UP_V1 (memtype=DATA).
NOTE: PROCEDURE DATASETS used (Total process time):
real time 0.61 seconds
cpu time 0.01 seconds
88
89 proc datasets
90      library=work nolist;
91      copy out = rosdwp move;
92      select biplr_up_v1 ;
93 quit;
NOTE: Moving WORK.BIPLR_UP_V1 to ROSDWP.BIPLR_UP_V1 (memtype=DATA).
NOTE: SAS variable labels, formats, and lengths are not written to DBMS tables.
NOTE: There were 0 observations read from the data set WORK.BIPLR_UP_V1.
NOTE: The data set ROSDWP.BIPLR_UP_V1 has 0 observations and 1 variables.
NOTE: PROCEDURE DATASETS used (Total process time):
real time 0.15 seconds
cpu time 0.04 seconds
94
95
96
97 *****************************************************************************;
98
99 *execute(commit) by rosdwp
100 ******************************************************************************;
101
102
103 proc SQL noprint ;
104 connect to oracle as rosdwp (user="&oracle_user." password="&oracle_pass" buffsize=32767 path='rosdwp'
104 ! preserve_comments);
105      execute(alter session set nls_date_format = 'ddmonyyyy') by rosdwp;
106 CREATE table biplr_rx as
107 SELECT
108 mrb_id,
109 uniq_mbr_id,
110 pcp_spc,
111 rx_date,
112 brand,
113 generic,
114 ahfs_cd,
115 ahfs_dsc,
116 lbl,
117 strngth,
118 unt,
119 spc_tx_cls_cd,
120 spc_tx_cls_dsc,
121 gcn,
122 rx_num,
123 rx_ingrd,
124 rx_paid,
125 rx_cnt,
126 rx_qty,
127 rx_day
128 FROM connection to rosdwp
129 (SELECT
130 mid.UNIQ_MBR_ID as uniq_mrb_id,
131 blpr.mrb_id.mbr_id,
132 pd.PRVDR_SPCLTY_DESC as pcp_spc,
133 pcf.LAST_SRVC_DT as rx_date,
134 dd.BRAND_NAME as brand,
135 dd.GNRC_NAME as generic,
136 dd.AHFS_THRPTC_CLS_CD as ahfs_cd,
137 dd.AHFS_THRPTC_CLS_DESC as ahfs_dsc,
138 dd.LABEL_NAME as lbl,
139 dd.STRNGTH_NUM as strngth,
140 dd.STRNGTH_UNIT_DESC as unt,
141 dd.SPECF_THRPTC_CLS_CD as spc_tx_cls_cd,
142 dd.SPECF_THRPTC_CLS_DESC as spc_tx_cls_dsc,
143 dd.GCN_NUM as gcn,
144 pcf.PRSCRPTN_NUM as rx_num,
145 SUM(pcf.INGRDNT_AMT) as rx_ingrd,
146 SUM(pcf.PD_AMT) as rx_paid,
147 SUM(pcf.UNIT_SRVC_CNT) as rx_cnt,
148 SUM(pcf.DSPNSD_QTY) as rx_qty,
149 SUM(pcf.DAY_SUPLY_CNT) as rx_day
150 FROM
151 PHRMCY_CLM_FACT pcf,
152 MBR_ID_DMNSN mid,
153 DRUG_DMNSN dd,
154 PRVDR_DMNSN pd,
155      BIPLR_UP_V1 blpr
156 WHERE
157 (BIPLR_UP_V1.mbr_id = MBR_ID_DMNSN.UNIQ_MBR_ID) And
158 (PHRMCY_CLM_FACT.FINL_CLM_KEY = PHRMCY_FINL_CLM_DMNSN.FINL_CLM_KEY) AND
159 (PHRMCY_CLM_FACT.MBR_KEY = MBR_ID_DMNSN.MBR_KEY) And
160 (PHRMCY_CLM_FACT.BNFT_KEY = MBR_BNFT_DMNSN.BNFT_KEY) And
161 (PHRMCY_CLM_FACT.DRUG_KEY = DRUG_DMNSN.DRUG_KEY) And
162 (PHRMCY_FINL_CLM_DMNSN.CLM_ORGN_CD IN ('M','A')) AND
163 (PHRMCY_CLM_FACT.LAST_SRVC_DT BETWEEN &q.&fdos.&q and &q.&ldos.&q)
164 );
ERROR: ORACLE prepare error: ORA-00904: "PHRMCY_CLM_FACT"."LAST_SRVC_DT": invalid identifier. SQL statement: SELECT
mid.UNIQ_MBR_ID as uniq_mrb_id, blpr.mrb_id.mbr_id, pd.PRVDR_SPCLTY_DESC as pcp_spc, pcf.LAST_SRVC_DT as
rx_date, dd.BRAND_NAME as brand, dd.GNRC_NAME as generic, dd.AHFS_THRPTC_CLS_CD as ahfs_cd,
dd.AHFS_THRPTC_CLS_DESC as ahfs_dsc, dd.LABEL_NAME as lbl, dd.STRNGTH_NUM as strngth, dd.STRNGTH_UNIT_DESC as
unt, dd.SPECF_THRPTC_CLS_CD as spc_tx_cls_cd, dd.SPECF_THRPTC_CLS_DESC as spc_tx_cls_dsc, dd.GCN_NUM as gcn,
pcf.PRSCRPTN_NUM as rx_num, SUM(pcf.INGRDNT_AMT) as rx_ingrd, SUM(pcf.PD_AMT) as rx_paid, SUM(pcf.UNIT_SRVC_CNT)
as rx_cnt, SUM(pcf.DSPNSD_QTY) as rx_qty, SUM(pcf.DAY_SUPLY_CNT) as rx_day FROM PHRMCY_CLM_FACT pcf,
MBR_ID_DMNSN mid, DRUG_DMNSN dd, PRVDR_DMNSN pd, BIPLR_UP_V1 blpr WHERE (BIPLR_UP_V1.mbr_id =
MBR_ID_DMNSN.UNIQ_MBR_ID) And (PHRMCY_CLM_FACT.FINL_CLM_KEY = PHRMCY_FINL_CLM_DMNSN.FINL_CLM_KEY) AND
(PHRMCY_CLM_FACT.MBR_KEY = MBR_ID_DMNSN.MBR_KEY) And (PHRMCY_CLM_FACT.BNFT_KEY = MBR_BNFT_DMNSN.BNFT_KEY) And
(PHRMCY_CLM_FACT.DRUG_KEY = DRUG_DMNSN.DRUG_KEY) And (PHRMCY_FINL_CLM_DMNSN.CLM_ORGN_CD IN ('M','A')) AND
(PHRMCY_CLM_FACT.LAST_SRVC_DT BETWEEN '01JUN2007' and '30SEP2009').
NOTE: PROC SQL set option NOEXEC and will continue to check the syntax of statements.
165 execute (drop table biplr_up_v1) by rosdwp;
NOTE: Statement not executed due to NOEXEC option.
166 disconnect from rosdwp;
NOTE: Statement not executed due to NOEXEC option.
167 quit;
NOTE: The SAS System stopped processing this step because of errors.
NOTE: PROCEDURE SQL used (Total process time):
real time 0.24 seconds
cpu time 0.02 seconds
168
Edited by: user12142482 on Nov 2, 2009 4:02 PM

Oracle bi error codes u9kp7q94 OBIEE 10g

Hi All,
I have created new user in RPD(Online Mode).
Then i have loged into Answer.It throws error
"oracle bi error codes u9kp7q94 OBIEE 10g"
How to fix.
Thanks
Gram

Raj wrote:
Hi All,
I have created new user in RPD(Online Mode).
Then i have loged into Answer.It throws error
"oracle bi error codes u9kp7q94 OBIEE 10g"
How to fix.
Thanks
GramAre you getting this error on the login screen? or when you are opening a report?

Obiee oracle gateway error while updating row count

Hi ,
OBIEE server 11.1.1.5 ,oracle server11g installed in linux 64bit,
while updating row count in Admin tool i am getting the following error
[NQODBC][SQL_STATE:HY000][nQSError:10058] A general error has occured.
[nQSError: 43113]Message returned from OBIS.
[nQSError:43093]An error occured while processing the EXECUTE PHYSICAL statement.
[nQSError:17003]Oracle gateway error: OCIEnvNIsCreate or OCIEnvInit failed to initialize environment.Please check your Oracle Client installation and make sure the correct version of OCI libraries are in the library path.
i am able to check the database from sqlplus it is working fine.
Any suggestion highly appreciated plzzz

Make sure your connection pool is valid and able to import or execute reports.
If everything good as above said, in Physical layer database properties-> general tab choose the database version and try it once.
If not
Check the doc id 1271486.1
Or
To resolve the issue create a softlink (ln -s) in the <OracleBI>/server/Bin folder to link to the 32-bit Oracle Client Driver file.
The example below shows how to perform a softlink from the 64 bit directory:
cd /u10/app/orcladmin/oracle/OracleBI/server/Bin
ln -s $ORACLE_HOME/lib32/libclntsh.so.10.1 libclntsh.so.10.1
If helps mark

Oracle SSO error while trying to access a report

Hi All,
I am using Oracle 11g reports and forms.My adf application(using JDeveloper 11.1.1.4) will use oracle reports through url.
From adf application we form a url for the reports like https://<server>:<port>/reports/rwservlet?server=devstage11g&destype=cache&desformat=pdf&report=spore001…
we send the userid parameter as a hidden parameter in the request as we do not want the userid information to be visible in the URL. It works fine in one environment. But in another environment when we hit the url it always give a page with a single line saying "Oracle SSO". When we hit the same url with userid parameter appended to it directly, it works fine.
Checked the configuration difference, but not able to find any difference in the configuration. Please help me to find why it always gives "Oracle SSO" error.
Thanks,
Priya.

Hi ;
pelase check below which could be similar error like yours
Troubleshooting of Runtime Errors of Customer Intelligence Reports [ID 284829.1]
Regard
Helios

Oracle cluster error

Similar Messages

Maybe you are looking for