Oracle Database parameter

Hi ,
Setting oracle parameter according to note 1431798.
In this not there is parameter _FIX_CONTROL which is having values which need to be set.
But in my initsid.ora file there is no _FIX_CONTROL parameter .Do i need to set manually?
How to calculate these two parameter weather these value is right or not?
db_cache_size=9097067888
shared_pool_size=9097067888
Any other parameter which is important for performance of database?
Regards
Adil

Hi Adil.
Is very important to get some information to tuning you database. I strong recommend you to collect a EarlyWatchAlert Report and analyse it. After this you can determine the best way to tuning you environment. Changing only theses parameters may be not give you the expected results
Change parameters to gain performance depends on each environment and individually issues and bottlenecks.
If you have experienced a low performance with I/O may be you have to check the File System DB Block, distribution of datafiles an etc.
db_cache_size depends of you available memory.
Regards

Similar Messages

Changes on Oracle Database Parameter when you increase your WP

Hi,
I need to know what oracle parameter do I need to change when I increase the number of WP.
I know from note 124361, you need to increase the following:
- PROCESS   --> #SAP Work processes * 2 + 20
- SESSIONS --> >=PROCESS
My question:
1. Is there any other parameter? what do I miss?
2. What is good number for session. Should it be 1 more or 10 more than the number of PROCESS?
Thanks in advance.

Hi,
If you are using oracle 9i then in this case the parameter have following value corresponds to sap workprocess number ( this values is not applied to SAP BW based system)
PROCESSES ->     (Total number of SAP WP * 2 ) + 20
SESSIONS ->       >= PROCESSES
In case of Oracle 10g
PROCESSES ->   (Total number of SAP WP * 2 ) + (J2EE Server processes *
MAX_CONNECTIONS) +    PARALLEL_MAX_SERVERS + 40
Where
PROCESSES
- Defines the maximum number of Oracle processes that exist in parallel
- The component relating to ABAP work processes is only relevant in systems with ABAP stacks. The component relating to J2EE server processes is only relevant in systems with Java stacks.
MAX_CONNECTIONS
- indicates the maximum number of connections (also called pool size) of the J2EE system DataSource
PARALLEL_MAX_SERVERS
- Defines the maximum number of parallel query processes
- Based on the number of CPU Cores of the database server
- The number of CPU Cores generally corresponds to the default value for the Oracle parameter CPU_COUNT. Therefore, if you are unsure in individual cases, you can use the value of the parameter CPU_COUNT (for example, in transaction DB26).
- If the database shares the server with other software (for example, SAP central instance, other Oracle instances), only the part of the CPU Cores that is mathematically available to the database should be considered in the calculation (for example, 8 CPU Cores, the SAP central instance and the Oracle database are to share resources 50:50 -> PARALLEL_MAX_SERVERS = 8 * 0.5 * 10 = 40).
Reference Note : 830576 - Parameter recommendations for Oracle 10g
If you are not using JAVA Stack then you can omit the Java stack related parameter.
regards,
kaushal

How to pass a date parameter from report builder query designer to oracle database

i'm using report builder 3.0 connected to oracle database. i'm trying to pass a date parameter in the query with no success, i don't
know the exact syntax. I've tried :
SELECT * FROM igeneral.GCL_CLAIMS where CREATED_BY IN (:CREATED_BY) AND CLAIM_YEAR IN(:UW_YEAR) AND (LOSS_DATE) >To_Date('01/01/2014','mm/dd/yyyy')
it worked perfectly.
However if i try to put a date parameter "From" instead of 01/01/2014 it will not work, a Define Query Parameter popup window appear and error occurred after i fill
the values (usually i shouldnt get this popup i should enter the value when i run the report)
SELECT * FROM igeneral.GCL_CLAIMS where CREATED_BY IN (:CREATED_BY) AND CLAIM_YEAR IN(:UW_YEAR) AND (LOSS_DATE) >To_Date(:From,'mm/dd/yyyy')
appreciate your assistance

Hi Gorgo,
According to your description, you have problem when in passing a parameter for running a Oracle Query. Right?
Based on my knowledge, it use "&" as synax for parameter in Oracle, like we use "@" in SQL Server. In this scenario, maybe you can try '01/01/2014' when inputing in "From". We are not sure if there's any limitation for To_Date()
function. For your self-testing, you can try the query in sqlplus/sql delveloper. Since your issue is related to Oracle query, we suggest you post this thread onto Oracle forum.
Best Regards,
Simon Hou

Import error on Oracle Database Express 10.2.0.1.0

Hi,
I try to import data from oracle V10.01.02 running on SUSE10 Linux to
oracle 10g (10.1.0.2.0) running on Windows Server 2003.
I am able to import the big part from my ata, but not all data.
The begin of my log file is:
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0
- Production
With the Partitioning, OLAP and Data Mining options
Export file created by EXPORT:V10.01.00 via conventional path
And after some time I receive:
IMP-00019: row rejected due to ORACLE error 12899
IMP-00003: ORACLE error 12899 encountered
ORA-12899: value too large for column "SAFCI"."EMP"."NAME"
(actual: 65, maximum: 64)
Column 1 1000005025
Column 2 ??????? ???????
Column 3 19-SEP-2002:00:00:00
Column 4 9089
Column 5 ??. ?????
Column 6 1.9828
Column 7 377.77
Column 8 75.55
Column 9 ???????????? ???????? ? ??? ???? ? 32 ??.
Column 10 19-SEP-2002:00:00:00
Column 11 ?????? ?????, ?.?. 172747675, ???. 23.11.200?
Column 12 ????????? ?????????
Column 13 ? ????
Column 14 T
Column 15
Column 16 F
IMP-00019: row rejected due to ORACLE error 12899
IMP-00003: ORACLE error 12899 encountered
ORA-12899: value too large for column "SAFCI"."EMP"."NAME"
(actual: 65, maximum: 64)
Column 1 1000006408
Column 2 ??????? ???????
Column 3 05-NOV-2002:00:00:00
Column 4 9089
Column 5 ??. ?????
Column 6 1.939
Column 7 82
Column 8 16.4
Column 9 ?????????? ? ???? ???? ? 40 ??.
Column 10 05-NOV-2002:00:00:00
Column 11 ?????? ?????, ?.?. 172747675, ???. 23.11.200?
Column 12 ????????? ?????????
Column 13 ? ????
Column 14 T
Column 15
Column 16 F 36943 rows imported
I can not understand this problem, because I exported the hole user and
also try to import the hole user in my new system.
Pls., can some one point me to some paper about this problem or help me
to solve the problem.
Thanks
configuration Oracle10g (EXP source)
SQLWKS> select * from nls_database_parameters
2>
PARAMETER VALUE
NLS_LANGUAGE BRAZILIAN PORTUGUESE
NLS_TERRITORY BRAZIL
NLS_CURRENCY R$
NLS_ISO_CURRENCY BRAZIL
NLS_NUMERIC_CHARACTERS ,.
NLS_CHARACTERSET WE8ISO8859P1
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD/MM/RR
NLS_DATE_LANGUAGE BRAZILIAN PORTUGUESE
NLS_SORT WEST_EUROPEAN
NLS_TIME_FORMAT HH24:MI:SSXFF
NLS_TIMESTAMP_FORMAT DD/MM/RR HH24:MI:SSXFF
NLS_TIME_TZ_FORMAT HH24:MI:SSXFF TZR
NLS_TIMESTAMP_TZ_FORMAT DD/MM/RR HH24:MI:SSXFF TZR
NLS_DUAL_CURRENCY Cr$
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_RDBMS_VERSION 10.1.0.2.0
configuration Oracle10g Express (IMP destination)
SQL> select * from nls_database_parameters;
PARAMETER VALUE
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CHARACTERSET AL32UTF8
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_SORT BINARY
NLS_TIME_FORMAT HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY $
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_RDBMS_VERSION 10.2.0.1.0

Hi
Your import database use a multibyte characterset, your export db a singlebyte cs.
This means, a char can need more than 1 byte.
Try this before import (and before create tables!!):
alter system set nls_length_semantics=char;Greetings
Sven

Unable to connect to Oracle Database using Oracle Sql developer 2.1.1.64

Hi Everyone,
I am searching for some help regarding my problem with Oracle connectivity. I have installed Oracle 11g release 2 on my Windows XP Professional Laptop. For a few days after installation i could connect to the Oracle database with the SYSTEM account using Oracle SQL developer ( installed on the same Laptop) but now i am unable to do so.It gives me this annoying message:
An error was encountered performing the required operation Got a minus one from read call .Vendor code 0
However i am able to connect using Sql Plus by supplying the username SYSTEM and the corresponding password.
My TNSNAMES .ora file is as follows:
ORACLE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST =localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORACLE)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
My Listener.ora file is as follows:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = D:\app\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:D:\app\product\11.2.0\dbhome_1\bin\oraclr11.dll")
(SID_DESC =
(GLOBAL_DBNAME = Oracle)
(ORACLE_HOME = D:\app\product\11.2.0\dbhome_1)
(SID_NAME = Oracle)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(PROTOCOL_STACK =
(PRESENTATION = GIOP)
(SESSION = RAW)
ADR_BASE_LISTENER = D:\app
My Sqlnet.ora file is as follows:
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
I am new to Oracle and so i need someone in this forum who can help me resolve this problem. Also i even tried connecting to the database using Toad 10.5.0.41. It give me the following error:
ORA 12537 : TNS Connection closed
Thanks for your patience and help in advance.
---Prashant

Hello Irian and Sue,
I can connect to the Oracle database using SQL Plus. Now when i TNSPING ORACLE from command line i get the following message :
Used parameter files:
D:\app\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST =localhost
*)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = ORACLE)))*
TNS-12537: TNS:connection closed
Thanks for your response to my initial post.Do u have any other methods to resolve this?

Sample Response File for Oracle Database 12c Standard Edition on Oracle Linux 6.4 -- working

oracle@styles-and-artists-development-oracle database]$ cat response/db_install.rsp
## Copyright(c) Oracle Corporation 1998,2013. All rights reserved.##
## Specify values for the variables listed below to customize     ##
## your installation.                                             ##
## Each variable is associated with a comment. The comment        ##
## can help to populate the variables with the appropriate        ##
## values.                                                        ##
## IMPORTANT NOTE: This file contains plain text passwords and    ##
## should be secured to have read permission only by oracle user ##
## or db administrator who owns this installation.                ##
# Do not change the following system generated value.
oracle.install.responseFileVersion=/oracle/install/rspfmt_dbinstall_response_schema_v12.1.0
# Specify the installation option.
# It can be one of the following:
#   - INSTALL_DB_SWONLY
#   - INSTALL_DB_AND_CONFIG
#   - UPGRADE_DB
oracle.install.option=INSTALL_DB_AND_CONFIG
# Specify the hostname of the system as set during the install. It can be used
# to force the installation to use an alternative hostname rather than using the
# first hostname found on the system. (e.g., for systems with multiple hostnames
# and network interfaces)
ORACLE_HOSTNAME=styles-and-artists-development-oracle
# Specify the Unix group to be set for the inventory directory.
UNIX_GROUP_NAME=oracle
# Specify the location which holds the inventory files.
# This is an optional parameter if installing on
# Windows based Operating System.
INVENTORY_LOCATION=/home/oracle/oracleInventory
# Specify the languages in which the components will be installed.
# en   : English                  ja   : Japanese
# fr   : French                   ko   : Korean
# ar   : Arabic                   es   : Latin American Spanish
# bn   : Bengali                  lv   : Latvian
# pt_BR: Brazilian Portuguese     lt   : Lithuanian
# bg   : Bulgarian                ms   : Malay
# fr_CA: Canadian French          es_MX: Mexican Spanish
# ca   : Catalan                  no   : Norwegian
# hr   : Croatian                 pl   : Polish
# cs   : Czech                    pt   : Portuguese
# da   : Danish                   ro   : Romanian
# nl   : Dutch                    ru   : Russian
# ar_EG: Egyptian                 zh_CN: Simplified Chinese
# en_GB: English (Great Britain) sk   : Slovak
# et   : Estonian                 sl   : Slovenian
# fi   : Finnish                  es_ES: Spanish
# de   : German                   sv   : Swedish
# el   : Greek                    th   : Thai
# iw   : Hebrew                   zh_TW: Traditional Chinese
# hu   : Hungarian                tr   : Turkish
# is   : Icelandic                uk   : Ukrainian
# in   : Indonesian               vi   : Vietnamese
# it   : Italian
# all_langs   : All languages
# Specify value as the following to select any of the languages.
# Example : SELECTED_LANGUAGES=en,fr,ja
# Specify value as the following to select all the languages.
# Example : SELECTED_LANGUAGES=all_langs
SELECTED_LANGUAGES=en
# Specify the complete path of the Oracle Home.
ORACLE_HOME=/extended2/oracleBase/db12c1
# Specify the complete path of the Oracle Base.
ORACLE_BASE=/extended2/oracleBase
# Specify the installation edition of the component.
# The value should contain only one of these choices.
#   - EE     : Enterprise Edition
#   - SE     : Standard Edition
#   - SEONE : Standard Edition One
#   - PE     : Personal Edition (WINDOWS ONLY)
oracle.install.db.InstallEdition=SE
# PRIVILEGED OPERATING SYSTEM GROUPS                                          #
# Provide values for the OS groups to which OSDBA and OSOPER privileges       #
# needs to be granted. If the install is being performed as a member of the   #
# group "dba", then that will be used unless specified otherwise below.       #
# The value to be specified for OSDBA and OSOPER group is only for UNIX based #
# Operating System.                                                           #
# The DBA_GROUP is the OS group which is to be granted OSDBA privileges.
oracle.install.db.DBA_GROUP=osdba
# The OPER_GROUP is the OS group which is to be granted OSOPER privileges.
# The value to be specified for OSOPER group is optional.
oracle.install.db.OPER_GROUP=osoper
# The BACKUPDBA_GROUP is the OS group which is to be granted OSBACKUPDBA privileges.
oracle.install.db.BACKUPDBA_GROUP=bckdba
# The DGDBA_GROUP is the OS group which is to be granted OSDGDBA privileges.
oracle.install.db.DGDBA_GROUP=dbdba
# The KMDBA_GROUP is the OS group which is to be granted OSKMDBA privileges.
oracle.install.db.KMDBA_GROUP=kmdba
#                               Grid Options                                  #
# Specify the type of Real Application Cluster Database
#   - ADMIN_MANAGED: Admin-Managed
#   - POLICY_MANAGED: Policy-Managed
# If left unspecified, default will be ADMIN_MANAGED
oracle.install.db.rac.configurationType=
# Value is required only if RAC database type is ADMIN_MANAGED
# Specify the cluster node names selected during the installation.
# Leaving it blank will result in install on local server only (Single Instance)
# Example : oracle.install.db.CLUSTER_NODES=node1,node2
oracle.install.db.CLUSTER_NODES=
# This variable is used to enable or disable RAC One Node install.
#   - true : Value of RAC One Node service name is used.
#   - false : Value of RAC One Node service name is not used.
# If left blank, it will be assumed to be false.
oracle.install.db.isRACOneInstall=
# Value is required only if oracle.install.db.isRACOneInstall is true.
# Specify the name for RAC One Node Service
oracle.install.db.racOneServiceName=
# Value is required only if RAC database type is POLICY_MANAGED
# Specify a name for the new Server pool that will be configured
# Example : oracle.install.db.rac.serverpoolName=pool1
oracle.install.db.rac.serverpoolName=
# Value is required only if RAC database type is POLICY_MANAGED
# Specify a number as cardinality for the new Server pool that will be configured
# Example : oracle.install.db.rac.serverpoolCardinality=2
oracle.install.db.rac.serverpoolCardinality=
#                        Database Configuration Options                       #
# Specify the type of database to create.
# It can be one of the following:
#   - GENERAL_PURPOSE/TRANSACTION_PROCESSING
#   - DATA_WAREHOUSE
oracle.install.db.config.starterdb.type=GENERAL_PURPOSE
# Specify the Starter Database Global Database Name.
oracle.install.db.config.starterdb.globalDBName=cbd
# Specify the Starter Database SID.
oracle.install.db.config.starterdb.SID=cdb1
# Specify whether the database should be configured as a Container database.
oracle.install.db.ConfigureAsContainerDB=true
# Specify the Pluggable Database name for the pluggable database in Container Database.
oracle.install.db.config.PDBName=pdb1
# Specify the Starter Database character set.
# One of the following
# AL32UTF8, WE8ISO8859P15, WE8MSWIN1252, EE8ISO8859P2,
# EE8MSWIN1250, NE8ISO8859P10, NEE8ISO8859P4, BLT8MSWIN1257,
# BLT8ISO8859P13, CL8ISO8859P5, CL8MSWIN1251, AR8ISO8859P6,
# AR8MSWIN1256, EL8ISO8859P7, EL8MSWIN1253, IW8ISO8859P8,
# IW8MSWIN1255, JA16EUC, JA16EUCTILDE, JA16SJIS, JA16SJISTILDE,
# KO16MSWIN949, ZHS16GBK, TH8TISASCII, ZHT32EUC, ZHT16MSWIN950,
# ZHT16HKSCS, WE8ISO8859P9, TR8MSWIN1254, VN8MSWIN1258
oracle.install.db.config.starterdb.characterSet=AL32UTF8
# This variable should be set to true if Automatic Memory Management
# in Database is desired.
# If Automatic Memory Management is not desired, and memory allocation
# is to be done manually, then set it to false.
oracle.install.db.config.starterdb.memoryOption=true
# Specify the total memory allocation for the database. Value(in MB) should be
# at least 256 MB, and should not exceed the total physical memory available
# on the system.
# Example: oracle.install.db.config.starterdb.memoryLimit=512
oracle.install.db.config.starterdb.memoryLimit=512
# This variable controls whether to load Example Schemas onto
# the starter database or not.
oracle.install.db.config.starterdb.installExampleSchemas=true
# Passwords can be supplied for the following four schemas in the             #
# starter database:                                                           #
#   SYS                                                                       #
#   SYSTEM                                                                    #
#   DBSNMP (used by Enterprise Manager)                                       #
# Same password can be used for all accounts (not recommended)                #
# or different passwords for each account can be provided (recommended)       #
# This variable holds the password that is to be used for all schemas in the
# starter database.
oracle.install.db.config.starterdb.password.ALL=CDBadmin12345#
# Specify the SYS password for the starter database.
oracle.install.db.config.starterdb.password.SYS=CBDsys12345#
# Specify the SYSTEM password for the starter database.
oracle.install.db.config.starterdb.password.SYSTEM=PDBsys12345#
# Specify the DBSNMP password for the starter database.
oracle.install.db.config.starterdb.password.DBSNMP=DBsnmp12345#
# Specify the PDBADMIN password required for creation of Pluggable Database in the Container Database.
oracle.install.db.config.starterdb.password.PDBADMIN=PDBadmin12345#
# Specify the management option to use for managing the database.
# Options are:
# 1. CLOUD_CONTROL - If you want to manage your database with Enterprise Manager Cloud Control along with Database Express.
# 2. DEFAULT   -If you want to manage your database using the default Database Express option.
oracle.install.db.config.starterdb.managementOption=DEFAULT
# Specify the OMS host to connect to Cloud Control.
# Applicable only when oracle.install.db.config.starterdb.managementOption=CLOUD_CONTROL
oracle.install.db.config.starterdb.omsHost=
# Specify the OMS port to connect to Cloud Control.
# Applicable only when oracle.install.db.config.starterdb.managementOption=CLOUD_CONTROL
oracle.install.db.config.starterdb.omsPort=
# Specify the EM Admin user name to use to connect to Cloud Control.
# Applicable only when oracle.install.db.config.starterdb.managementOption=CLOUD_CONTROL
oracle.install.db.config.starterdb.emAdminUser=
# Specify the EM Admin password to use to connect to Cloud Control.
# Applicable only when oracle.install.db.config.starterdb.managementOption=CLOUD_CONTROL
oracle.install.db.config.starterdb.emAdminPassword=
# SPECIFY RECOVERY OPTIONS                                                    #
# Recovery options for the database can be mentioned using the entries below #
# This variable is to be set to false if database recovery is not required. Else
# this can be set to true.
oracle.install.db.config.starterdb.enableRecovery=true
# Specify the type of storage to use for the database.
# It can be one of the following:
#   - FILE_SYSTEM_STORAGE
#   - ASM_STORAGE
oracle.install.db.config.starterdb.storageType=FILE_SYSTEM_STORAGE
# Specify the database file location which is a directory for datafiles, control
# files, redo logs.
# Applicable only when oracle.install.db.config.starterdb.storage=FILE_SYSTEM_STORAGE
oracle.install.db.config.starterdb.fileSystemStorage.dataLocation=/extended1/db/data
# Specify the recovery location.
# Applicable only when oracle.install.db.config.starterdb.storage=FILE_SYSTEM_STORAGE
oracle.install.db.config.starterdb.fileSystemStorage.recoveryLocation=/extended1/db/recovery
# Specify the existing ASM disk groups to be used for storage.
# Applicable only when oracle.install.db.config.starterdb.storageType=ASM_STORAGE
oracle.install.db.config.asm.diskGroup=/dev/oracleasm
# Specify the password for ASMSNMP user of the ASM instance.
# Applicable only when oracle.install.db.config.starterdb.storage=ASM_STORAGE
oracle.install.db.config.asm.ASMSNMPPassword=ASMsnmp122345#
# Specify the My Oracle Support Account Username.
# Example   : [email protected]
MYORACLESUPPORT_USERNAME=
# Specify the My Oracle Support Account Username password.
# Example    : MYORACLESUPPORT_PASSWORD=password
MYORACLESUPPORT_PASSWORD=
# Specify whether to enable the user to set the password for
# My Oracle Support credentials. The value can be either true or false.
# If left blank it will be assumed to be false.
# Example    : SECURITY_UPDATES_VIA_MYORACLESUPPORT=true
SECURITY_UPDATES_VIA_MYORACLESUPPORT=false
# Specify whether user doesn't want to configure Security Updates.
# The value for this variable should be true if you don't want to configure
# Security Updates, false otherwise.
# The value can be either true or false. If left blank it will be assumed
# to be false.
# Example    : DECLINE_SECURITY_UPDATES=false
DECLINE_SECURITY_UPDATES=flase
# Specify the Proxy server name. Length should be greater than zero.
# Example    : PROXY_HOST=proxy.domain.com
PROXY_HOST=
# Specify the proxy port number. Should be Numeric and atleast 2 chars.
# Example    : PROXY_PORT=25
PROXY_PORT=
# Specify the proxy user name. Leave PROXY_USER and PROXY_PWD
# blank if your proxy server requires no authentication.
# Example    : PROXY_USER=username
PROXY_USER=
# Specify the proxy password. Leave PROXY_USER and PROXY_PWD
# blank if your proxy server requires no authentication.
# Example    : PROXY_PWD=password
PROXY_PWD=
# Specify the proxy realm.
# Example    : PROXY_REALM=metalink
PROXY_REALM=
# Specify the Oracle Support Hub URL.
# Example    : COLLECTOR_SUPPORTHUB_URL=https://orasupporthub.company.com:8080/
COLLECTOR_SUPPORTHUB_URL=
# Specify the auto-updates option. It can be one of the following:
#   - MYORACLESUPPORT_DOWNLOAD
#   - OFFLINE_UPDATES
#   - SKIP_UPDATES
oracle.installer.autoupdates.option=SKIP_UPDATES
# In case MYORACLESUPPORT_DOWNLOAD option is chosen, specify the location where
# the updates are to be downloaded.
# In case OFFLINE_UPDATES option is chosen, specify the location where the updates
# are present.
oracle.installer.autoupdates.downloadUpdatesLoc=
# Specify the My Oracle Support Account Username which has the patches download privileges
# to be used for software updates.
# Example   : [email protected]
AUTOUPDATES_MYORACLESUPPORT_USERNAME=
# Specify the My Oracle Support Account Username password which has the patches download privileges
# to be used for software updates.
# Example    : AUTOUPDATES_MYORACLESUPPORT_PASSWORD=password
AUTOUPDATES_MYORACLESUPPORT_PASSWORD=

This is the simplest installation you can get, but if you want to do a fast response file based installation, there it is.

Problem with Character Set in Oracle database 10g

Hi,
I tried to import one tablespace into test server. Source server with Oracle 8i and Target server with Oracle database 10g. The error I get is
Import: Release 10.2.0.1.0 - Production on Thu Aug 3 00:20:49 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Username: sys as sysdba
Password:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Export file created by EXPORT:V08.01.07 via conventional path
About to import transportable tablespace(s) metadata...
import done in WE8DEC character set and AL16UTF16 NCHAR character set
export server uses WE8DEC NCHAR character set (possible ncharset conversion)
. importing SYS's objects into SYS
. importing SYS's objects into SYS
IMP-00017: following statement failed with ORACLE error 19736:
"BEGIN sys.dbms_plugts.beginImport ('8.1.7.4.0',2,'2',NULL,'NULL',67051,25"
"51,2); END;"
IMP-00003: ORACLE error 19736 encountered
ORA-19736: can not plug a tablespace into a database using a different national character set
ORA-06512: at "SYS.DBMS_PLUGTS", line 2386
ORA-06512: at "SYS.DBMS_PLUGTS", line 1946
ORA-06512: at line 1
IMP-00000: Import terminated unsuccessfully
PLZ somebody help in geting resolve this. Has anybody seen this error before.

The solution to this problem is described in MetaLink note #211920.1. But this note is published with LIMITED access as it involves using a hidden parameter.
You can get access to the note through Oracle Support only.
The problem itself is solved generically, if the source database is at least 10.1.0.3 and the target database is 10.2
-- Sergiusz

Multibyte issue in Oracle Database Link

Hi Gurus,
Greetings!!!
I need to transfer data from Microsoft SQL Server 2005 to Oracle DAtabase 10g. I achieved it using Heterogeneous Connectivity. I can now issue queries but unfortunately i got an issue in displaying multibyte characters. I thought of using another Tool that can display multibyte data but it did not help. I even tried setting the initialization parameter HS_LANGUAGE to different characterset but still not able to display. Kindly help and advise how to resolve the said issue.
Many Thanks in Advance,
Benjie

Hi Kamkan,
My oracle database is configured to support multi language character.
PARAMETER     VALUE
NLS_LANGUAGE     AMERICAN
NLS_TERRITORY     AMERICA
NLS_CURRENCY     $
NLS_ISO_CURRENCY     AMERICA
NLS_NUMERIC_CHARACTERS     .,
NLS_CHARACTERSET     AL32UTF8
NLS_CALENDAR     GREGORIAN
NLS_DATE_FORMAT     DD-MON-RR
NLS_DATE_LANGUAGE      AMERICAN
NLS_SORT     BINARY
NLS_TIME_FORMAT     HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT     DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT     HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT     DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY     $
NLS_COMP     BINARY
NLS_LENGTH_SEMANTICS     BYTE
NLS_NCHAR_CONV_EXCP     FALSE
NLS_NCHAR_CHARACTERSET     AL16UTF16
NLS_RDBMS_VERSION     10.2.0.1.0

Memory issue in oracle database 11g ...

Hi All,
I have installed oracle11gR2 on Linux (CentOS 5.5)... SErver has good amount of HDD - 669G and 16G RAM. I have two database running on this server.
I am getting out of memory error and end user also complains about dB is very slow... I have configured memory and SGA parameter in both the database and total allocation of memory and SGA maximum size 7.5G. So I assuemd that oracle database used RAM from whatever we configured in memory maximum parameter , in my case I have allocated upto 7.5G but when I run top command I can see almost 16G is in used and only few mbs left...
can anyone suggest me my assumption about memory allcoation to database is correct or not ? or when I allocated memory to database (using memory max parameter) then why top showing all memory in used. This is database server and no other process is running except oracle.
Thanks in advance...

Just enable AMM as below and forget the nitty gritties of setting lots of memory parameters ;-D
ALTER SYSTEM SET MEMORY_TARGET=6G SCOPE=SPFILE; --select the amount of memory as per your need

Dump : Table not found in oracle database

Hi,
I am doing a program regarding analysis of tables belonging to archiving objects.In my program i am calling a RFC function module . 'DB02_ORA_TABLE_INDEX_ANALYSIS . But it is giving the dump for native sql statement .
--- Oracle block size ----------------------------------------------
exec sql.
select value from v$parameter where name like 'db_block_size%'
into :block_size
endexec.
Dump is table not found in database.
Could please let me know what setting i am missing...
Thanks in advance.....
Sudhakar

Hi,
the view V$PARAMETER must be accessed through SAP/Oracle Database Monitor lets you view the active Oracle database parameters and the contents of the init.ora file.
Alternatively, you can use transaction st04. You need to apply SAP Note 706927 before using the database monitor.
Hope this information is help to you.
Regards,
José

Connecting to an Oracle database after clicking on a foi

Does anyone know how or have any examples on how to connect to an oracle database after clicking on a 'feature of interest' in MapViewer? I want to be able to click on a 'feature of interest' on the map, and have a list of records from an oracle table displayed using the identified key of the foi. I am able to create the feature of interest, and add the event listener for 'mouse click', but am unsure how to connect to the database at this point. I have been able to connect to the database in a different jsp, but not from here. Thank you.

1. Create a JSP page that does the database query. It should take the foi id as an input parameter.
2. In the foi mouse click listener, display the JSP page in iframe. The iframe can be placed outside the map or inside the info window. The function should do something like this.
function myClickListener(point, foi)
mapview.displayInfoWindow(point, "<iframe id='my_iframe_id' frameborder=0 width=300px height=400px />", 300, 400) ;
var myIframe = document.getElementById("my_iframe_id") ;
myIframe.src = "http://myhost/myjsp?key=" + foi.id ;
}

Problem in connecting SQL developer to Oracle database

Hi,I don't know this is the correct forum for my problem
I Just installed   Oracle Sql developer 3.2.I encountered a problem while creating a new connection with Oracle database 11g..
The error message says "Status : Failure -Test failed: The Network Adapter could not establish the connection"..
The command response as follows
lsnrctl stop
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 31-OCT-2013 21:52
:56
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
TNS-01190: The user is not authorized to execute the requested listener command
lsnrctl start
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 31-OCT-2013 21:55
:49
Copyright (c) 1991, 2010, Oracle. All rights reserved.
TNS-01106: Listener using listener name LISTENER has already been started
lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 31-OCT-2013 21:57
:07
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date                31-OCT-2013 20:57:07
Uptime                    0 days 1 hr. 0 min. 0 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\app\RIYAS\product\11.2.0\dbhome_1\network\admin\lis
tener.ora
Listener Log File         c:\app\riyas\diag\tnslsnr\RIYAS-PC\listener\alert\log.
xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orcl" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
lsnrctl service
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 31-OCT-2013 21:58
:28
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0
         LOCAL SERVER
Service "orcl" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:102 refused:0 state:ready
         LOCAL SERVER
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
    Handler(s):
      "D000" established:0 refused:0 current:0 max:1022 state:ready
         DISPATCHER <machine: RIYAS-PC, pid: 1828>
         (ADDRESS=(PROTOCOL=tcp)(HOST=RIYAS-PC)(PORT=49911))
The command completed successfully
set
ALLUSERSPROFILE=C:\ProgramData
APPDATA=C:\Users\RIYAS\AppData\Roaming
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
CommonProgramW6432=C:\Program Files\Common Files
COMPUTERNAME=RIYAS-PC
ComSpec=C:\windows\system32\cmd.exe
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Users\RIYAS
LOCALAPPDATA=C:\Users\RIYAS\AppData\Local
LOGONSERVER=\\RIYAS-PC
NUMBER_OF_PROCESSORS=4
OS=Windows_NT
Path=C:\app\RIYAS\product\11.2.0\dbhome_1\bin;C:\app\RIYAS\product\11.2.0\dbhome
_2\bin;C:\Program Files (x86)\PC Connectivity Solution\;C:\Program Files\Common
Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\Common Files\Microsof
t Shared\Windows Live;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;C:\
Program Files (x86)\Intel\iCLS Client\;C:\Program Files\Intel\iCLS Client\;C:\wi
ndows\system32;C:\windows;C:\windows\System32\Wbem;C:\windows\System32\WindowsPo
werShell\v1.0\;C:\Program Files\Intel\Intel(R) Management Engine Components\DAL;
C:\Program Files\Intel\Intel(R) Management Engine Components\IPT;C:\Program File
s (x86)\Intel\Intel(R) Management Engine Components\DAL;C:\Program Files (x86)\I
ntel\Intel(R) Management Engine Components\IPT;C:\Program Files (x86)\Intel\Open
CL SDK\2.0\bin\x86;C:\Program Files (x86)\Intel\OpenCL SDK\2.0\bin\x64;C:\Progra
m Files\Intel\WiFi\bin\;C:\Program Files\Common Files\Intel\WirelessCommon\;C:\P
rogram Files (x86)\Windows Live\Shared
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 58 Stepping 9, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=3a09
ProgramData=C:\ProgramData
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
ProgramW6432=C:\Program Files
PROMPT=$P$G
PSModulePath=C:\windows\system32\WindowsPowerShell\v1.0\Modules\
PUBLIC=C:\Users\Public
SESSIONNAME=Console
SystemDrive=C:
SystemRoot=C:\windows
TEMP=C:\Users\RIYAS\AppData\Local\Temp
TMP=C:\Users\RIYAS\AppData\Local\Temp
USERDOMAIN=RIYAS-PC
USERNAME=RIYAS
USERPROFILE=C:\Users\RIYAS
windir=C:\windows
windows_tracing_flags=3
windows_tracing_logfile=C:\BVTBin\Tests\installpackage\csilogfile.log
Pls help..

You don't say what you have done to set up a connection.
This error is usually caused by something like using the wrong host name, or port number.

Error while adding oracle database resource to the fail safe group

Hi,
we are installaing ERP 6.0 EHP4 , oracle10.2.04 in MSCS
During the step, Adding the oracle Database Resource to the fail safe
group , I am getting the error.
28 13:21:57    ** WARNING : FS-10288: Parameter file C:\oracle\BCP\102\database\init<SID>_OFS.ora is not located on a cluster disk
29 13:21:57    ** WARNING : FS-10404: The database uses a nonclustered disk in one of the system parameters. Value of parameter is C:\ORACLE\<SID>\102\RDBMS\AUDIT
30 13:21:58    ** ERROR : FS-10036: The resource uses disk SAP HDD, which is also used by cluster resource SAP VIP in another group
31 13:21:58    ** ERROR : FS-10778: The Oracle Database resource provider failed to configure the cluster resource <SID>.WORLD
32 13:21:58    ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
33 13:21:58    ** ERROR : FS-10497: Starting clusterwide rollback of the operation
34 13:21:58 FS-10488:<primary node name> : Starting rollback of operation
35 13:21:58   > FS-10090: Rolling back Oracle Net changes on node <primary node name>
I am having one local disk C: one shared disk Z: and quorum disk Q:
Shared disk Z: is already used for SAP<sid> group.
Regards,
Joel

Joeldhanaraj wrote:>
> Hi,
>
> we are installaing ERP 6.0 EHP4 , oracle10.2.04 in MSCS
>
> During the step, Adding the oracle Database Resource to the fail safe
> group , I am getting the error.
>
> 28 13:21:57    ** WARNING : FS-10288: Parameter file C:\oracle\BCP\102\database\init<SID>_OFS.ora is not located on a cluster disk
> 29 13:21:57    ** WARNING : FS-10404: The database uses a nonclustered disk in one of the system parameters. Value of parameter is C:\ORACLE\<SID>\102\RDBMS\AUDIT
> 30 13:21:58    ** ERROR : FS-10036: The resource uses disk SAP HDD, which is also used by cluster resource SAP VIP in another group
> 31 13:21:58    ** ERROR : FS-10778: The Oracle Database resource provider failed to configure the cluster resource <SID>.WORLD
> 32 13:21:58    ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
> 33 13:21:58    ** ERROR : FS-10497: Starting clusterwide rollback of the operation
> 34 13:21:58 FS-10488:<primary node name> : Starting rollback of operation
> 35 13:21:58   > FS-10090: Rolling back Oracle Net changes on node <primary node name>
>
> I am having one local disk C: one shared disk Z: and quorum disk Q:
>
> Shared disk Z: is already used for SAP<sid> group.
Hi Joel,
how about following the advice given by the error message and moving the mentioned files/folder (init<sid>_OFS.ora, AUDIT folder) to a clustered resource disk?
just my 2 pence...

Oracle Database 10.2.0.1 to 10.2.0.5 error

Hi,
i am having Oracle database 10g(10.2.0.1) on RHEL5 which i am upgrading to 10.2.0.5. I receive the below error while installing. It seems that i need to change the kernal parameters.
Checking operating system requirements ...
Expected result: One of redhat-6,redhat-5,redhat-4,redhat-3,SuSE-11,SuSE-10,SuSE-9,asianux-3,asianux-2,asianux-1
Actual Result: redhat-5
Check complete. The overall result of this check is: Passed
=======================================================================
Checking operating system package requirements ...
Checking for make-3.81; found make-1:3.81-3.el5.     Passed
Checking for binutils-2.17.50.0.6; found binutils-2.17.50.0.6-9.el5.     Passed
Checking for gcc-4.1.1; found gcc-4.1.2-44.el5.     Passed
Checking for libaio-0.3.106; found libaio-0.3.106-3.2.     Passed
Checking for libstdc++-4.1.1; found libstdc++-4.1.2-44.el5.     Passed
Check complete. The overall result of this check is: Passed
=======================================================================
Checking kernel parameters
Checking for semmsl=250; found semmsl=250.     Passed
Checking for semmns=32000; found semmns=32000.     Passed
Checking for semopm=100; found semopm=100.     Passed
Checking for semmni=128; found semmni=128.     Passed
Checking for shmmax=1073741824; found shmmax=536870912.     Failed <<<<
Checking for shmmni=4096; found shmmni=4096.     Passed
Checking for shmall=2097152; found shmall=2097152.     Passed
Checking for file-max=101365; found file-max=205012.     Passed
Checking for VERSION=2.6.18; found VERSION=2.6.18-128.el5.     Passed
Checking for ip_local_port_range=9000 - 65500; found ip_local_port_range=1024 - 65000.     Failed <<<<
Checking for rmem_default=1048576; found rmem_default=262144.     Failed <<<<
Checking for rmem_max=1048576; found rmem_max=262144.     Failed <<<<
Checking for wmem_default=262144; found wmem_default=262144.     Passed
Checking for wmem_max=262144; found wmem_max=262144.     Passed
Check complete. The overall result of this check is: Failed <<<<
Problem: The kernel parameters do not meet the minimum requirements (see above).
Recommendation: Perform operating system specific instructions to update the kernel parameters.
=======================================================================
Checking Recommended glibc version
Expected result: ATLEAST=2.5-12 NOT_EQUALS=2.5-18
Actual Result: 2.5-34
Check complete. The overall result of this check is: Passed
=======================================================================
Checking physical memory requirements ...
Expected result: 922MB
Actual Result: 2016MB
Check complete. The overall result of this check is: Passed
=======================================================================
Checking available swap space requirements ...
Expected result: 3024MB
Actual Result: 3416MB
Check complete. The overall result of this check is: Passed
=======================================================================
Checking the Components installed in Oracle Home
Check complete. The overall result of this check is: Passed
=======================================================================
Checking for Oracle Home incompatibilities ...
Check complete. The overall result of this check is: Passed
=======================================================================
Do i need to change some kernal parameters for this upgrade process?
Regards,
007

007 wrote:
Hi,
i am having Oracle database 10g(10.2.0.1) on RHEL5 which i am upgrading to 10.2.0.5. I receive the below error while installing. It seems that i need to change the kernal parameters.
Checking operating system requirements ...
Expected result: One of redhat-6,redhat-5,redhat-4,redhat-3,SuSE-11,SuSE-10,SuSE-9,asianux-3,asianux-2,asianux-1
Actual Result: redhat-5
Check complete. The overall result of this check is: Passed
=======================================================================
Checking operating system package requirements ...
Checking for make-3.81; found make-1:3.81-3.el5.     Passed
Checking for binutils-2.17.50.0.6; found binutils-2.17.50.0.6-9.el5.     Passed
Checking for gcc-4.1.1; found gcc-4.1.2-44.el5.     Passed
Checking for libaio-0.3.106; found libaio-0.3.106-3.2.     Passed
Checking for libstdc++-4.1.1; found libstdc++-4.1.2-44.el5.     Passed
Check complete. The overall result of this check is: Passed
=======================================================================
Checking kernel parameters
Checking for semmsl=250; found semmsl=250.     Passed
Checking for semmns=32000; found semmns=32000.     Passed
Checking for semopm=100; found semopm=100.     Passed
Checking for semmni=128; found semmni=128.     Passed
Checking for shmmax=1073741824; found shmmax=536870912.     Failed <<<<
Checking for shmmni=4096; found shmmni=4096.     Passed
Checking for shmall=2097152; found shmall=2097152.     Passed
Checking for file-max=101365; found file-max=205012.     Passed
Checking for VERSION=2.6.18; found VERSION=2.6.18-128.el5.     Passed
Checking for ip_local_port_range=9000 - 65500; found ip_local_port_range=1024 - 65000.     Failed <<<<
Checking for rmem_default=1048576; found rmem_default=262144.     Failed <<<<
Checking for rmem_max=1048576; found rmem_max=262144.     Failed <<<<
Checking for wmem_default=262144; found wmem_default=262144.     Passed
Checking for wmem_max=262144; found wmem_max=262144.     Passed
Check complete. The overall result of this check is: Failed <<<<
Problem: The kernel parameters do not meet the minimum requirements (see above).
Recommendation: Perform operating system specific instructions to update the kernel parameters.
=======================================================================
Checking Recommended glibc version
Expected result: ATLEAST=2.5-12 NOT_EQUALS=2.5-18
Actual Result: 2.5-34
Check complete. The overall result of this check is: Passed
=======================================================================
Checking physical memory requirements ...
Expected result: 922MB
Actual Result: 2016MB
Check complete. The overall result of this check is: Passed
=======================================================================
Checking available swap space requirements ...
Expected result: 3024MB
Actual Result: 3416MB
Check complete. The overall result of this check is: Passed
=======================================================================
Checking the Components installed in Oracle Home
Check complete. The overall result of this check is: Passed
=======================================================================
Checking for Oracle Home incompatibilities ...
Check complete. The overall result of this check is: Passed
=======================================================================
Do i need to change some kernal parameters for this upgrade process?
Regards,
007Yes you need to change as its been showed.
I think during last install you might have given -ignoreprerequists option to ignore these errors.
So its better to change the kernel parameter as shows in output then try again. This will solve your problem.

GTC Error While Provisioning to Oracle Database Tables

I'm trying to setup GTC connector to provisioning/reconcile users into database tables, but during the provisionig gtc fails. check the lines above to see the error
ERROR,07 Nov 2010 20:18:38,383,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/sendData encounter some problems: Attribute: matricula does not exist in the specified parent table/view: xladm.usuarios_view
com.thortech.xl.gc.exception.DBException: Attribute: matricula does not exist in the specified parent table/view: xladm.usuarios_view
matricula is the primary key
I'm using OIM 9102 with bundle patch 12 appled. connector version is 9105. Oracle database version is 11.1.0.7. My platform is Windows 2003.
database table's ddl
create table usuarios (
matricula varchar2(10) primary key,
nome varchar2(80),
status varchar2(20),
ultima_atualizacao date,
senha varchar2(20));
create view usuarios_view as select * from usuarios;
GTC Connector Setup
Provide Basic Information View
Name INFO
Reconciliation
Transport Provider Database Application Tables Reconciliation
Format Provider Database Application Tables Reconciliation
Trusted Source Reconciliation No
Provisioning
Transport Provider Database Application Tables Provisioning
Format Provider Database Application Tables Provisioning
Specify Parameter Values Change
Database Driver oracle.jdbc.driver.OracleDriver
Database URL jdbc:oracle:thin:@localhost:1521:orcl
Database User ID xladm
Database Password ********
Customized Query
Use Native Query No
Connection Properties
Parent Table/View Name usuarios_view
Child Table/View Names
Unique Attribute matricula
Timestamp Attribute ultima_atualizacao
Database Date format
Status Attribute status
Status Lookup Code Lookup.InfoGolden.Status
Is Primary Key Auto Incremented No
Target Date Format yyyy-MM-dd hh:mm:ss.fffffffff
Batch Size All
Stop Reconciliation Threshold None
Stop Threshold Minimum Records None
Source Date Format yyyy/MM/dd hh:mm:ss z
Reconcile Deletion of Multivalued Attribute Data Yes
Reconciliation Type Full
error log
Running GENERICADAPTER
Target Class = com.thortech.xl.gc.runtime.GCAdapterLibrary
DEBUG,07 Nov 2010 20:18:37,086,[OIMCP.DATC],Class/Method: DBReconFormatProvider/formatData entered.
DEBUG,07 Nov 2010 20:18:37,086,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/initialize entered.
DEBUG,07 Nov 2010 20:18:37,086,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/initialize - Data: driver - Value: oracle.jdbc.driver.OracleDriver
DEBUG,07 Nov 2010 20:18:37,086,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/initialize - Data: url - Value: jdbc:oracle:thin:@localhost:1521:orcl
DEBUG,07 Nov 2010 20:18:37,086,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/initialize - Data: username - Value: xladm
DEBUG,07 Nov 2010 20:18:37,086,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/initialize - Data: password - Value: *******
DEBUG,07 Nov 2010 20:18:37,086,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/initialize - Data: parentContainerName - Value: usuarios_view
DEBUG,07 Nov 2010 20:18:37,086,[OIMCP.DATC],Class/Method: DBReconTransportProvider/convertCSVToArraylist entered.
DEBUG,07 Nov 2010 20:18:37,086,[OIMCP.DATC],Class/Method: DBReconTransportProvider/convertCSVToArraylist - Data: Run Time Parameters - Value: []
DEBUG,07 Nov 2010 20:18:37,086,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/initialize - Data: childContainerTableNames - Value: []
DEBUG,07 Nov 2010 20:18:37,086,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/initialize - Data: parentContainerUniqueKey - Value: matricula
DEBUG,07 Nov 2010 20:18:37,086,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/initialize - Data: statusField - Value: status
DEBUG,07 Nov 2010 20:18:37,086,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/initialize - Data: statusFieldLookup - Value: Lookup.InfoGolden.Status
DEBUG,07 Nov 2010 20:18:37,086,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/initialize left.
DEBUG,07 Nov 2010 20:18:37,086,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/initialize - Data: dbDateFormat - Value:
DEBUG,07 Nov 2010 20:18:37,086,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/sendData entered.
INFO,07 Nov 2010 20:18:37,086,[OIMCP.DATC],Within PROV_OPERATION_ADDUSER::statusField=status
DEBUG,07 Nov 2010 20:18:37,117,[OIMCP.DATC],Class/Method: DBFacade/getConnectionProp entered.
DEBUG,07 Nov 2010 20:18:37,117,[OIMCP.DATC],Class/Method: DBFacade/setUpSSLPropertiesForDB2 entered.
DEBUG,07 Nov 2010 20:18:37,117,[OIMCP.DATC],ExitingMethodDebug
INFO,07 Nov 2010 20:18:37,148,[OIMCP.DATC],dbType:::: = Oracle
DEBUG,07 Nov 2010 20:18:37,148,[OIMCP.DATC],Class/Method: DBFacade/getMatchingSchemaName - Data: found matching schema - Value: XLADM
DEBUG,07 Nov 2010 20:18:37,148,[OIMCP.DATC],Class/Method: DBFacade/getMatchingTableName - Data: found exact matching schema:- - Value: XLADM
DEBUG,07 Nov 2010 20:18:37,227,[OIMCP.DATC],Class/Method: DBFacade/getMatchingTableName - Data: found matching tables - Value: USUARIOS_VIEW
DEBUG,07 Nov 2010 20:18:37,227,[OIMCP.DATC],Class/Method: DBFacade/getMatchingTableName - Data: found exact matching table:- - Value: USUARIOS_VIEW
INFO,07 Nov 2010 20:18:37,258,[OIMCP.DATC],dbType:::: = Oracle
DEBUG,07 Nov 2010 20:18:37,273,[OIMCP.DATC],Class/Method: DBFacade/getMatchingSchemaName - Data: found matching schema - Value: XLADM
DEBUG,07 Nov 2010 20:18:37,273,[OIMCP.DATC],Class/Method: DBFacade/getMatchingTableName - Data: found exact matching schema:- - Value: XLADM
DEBUG,07 Nov 2010 20:18:37,336,[OIMCP.DATC],Class/Method: DBFacade/getMatchingTableName - Data: found matching tables - Value: USUARIOS_VIEW
DEBUG,07 Nov 2010 20:18:37,336,[OIMCP.DATC],Class/Method: DBFacade/getMatchingTableName - Data: found exact matching table:- - Value: USUARIOS_VIEW
INFO,07 Nov 2010 20:18:37,445,[OIMCP.DATC],dbType:::: = Oracle
INFO,07 Nov 2010 20:18:37,445,[OIMCP.DATC],dbType:::: = Oracle
DEBUG,07 Nov 2010 20:18:37,445,[OIMCP.DATC],Class/Method: DBFacade/getMatchingSchemaName - Data: found matching schema - Value: XLADM
DEBUG,07 Nov 2010 20:18:37,445,[OIMCP.DATC],Class/Method: DBFacade/getMatchingTableName - Data: found exact matching schema:- - Value: XLADM
DEBUG,07 Nov 2010 20:18:37,523,[OIMCP.DATC],Class/Method: DBFacade/getMatchingTableName - Data: found matching tables - Value: USUARIOS_VIEW
DEBUG,07 Nov 2010 20:18:37,523,[OIMCP.DATC],Class/Method: DBFacade/getMatchingTableName - Data: found exact matching table:- - Value: USUARIOS_VIEW
DEBUG,07 Nov 2010 20:18:38,367,[OIMCP.DATC],Class/Method: DBFacade/getPrimaryKeys - Data: Primary Keys - Value: []
DEBUG,07 Nov 2010 20:18:38,383,[OIMCP.DATC],Class/Method: DBFacade/getColumns - Data: Column Name: - Value: MATRICULA
DEBUG,07 Nov 2010 20:18:38,383,[OIMCP.DATC],Class/Method: DBFacade/getColumns - Data: Column Dataype integer value: - Value: 12
DEBUG,07 Nov 2010 20:18:38,383,[OIMCP.DATC],Class/Method: DBFacade/getColumns - Data: Column Size: - Value: 10
DEBUG,07 Nov 2010 20:18:38,383,[OIMCP.DATC],Class/Method: DBFacade/getColumns - Data: Table Name: - Value: USUARIOS_VIEW
DEBUG,07 Nov 2010 20:18:38,383,[OIMCP.DATC],Class/Method: DBFacade/getClumns - Data: Column Datatype Name: - Value: VARCHAR2
DEBUG,07 Nov 2010 20:18:38,383,[OIMCP.DATC],Class/Method: DBFacade/getColumns - Data: Database Type Name: - Value: Oracle
DEBUG,07 Nov 2010 20:18:38,383,[OIMCP.DATC],Class/Method: DBFacade/getColumns - Data: Column Name: - Value: NOME
DEBUG,07 Nov 2010 20:18:38,383,[OIMCP.DATC],Class/Method: DBFacade/getColumns - Data: Column Dataype integer value: - Value: 12
DEBUG,07 Nov 2010 20:18:38,383,[OIMCP.DATC],Class/Method: DBFacade/getColumns - Data: Column Size: - Value: 80
DEBUG,07 Nov 2010 20:18:38,383,[OIMCP.DATC],Class/Method: DBFacade/getColumns - Data: Table Name: - Value: USUARIOS_VIEW
DEBUG,07 Nov 2010 20:18:38,383,[OIMCP.DATC],Class/Method: DBFacade/getClumns - Data: Column Datatype Name: - Value: VARCHAR2
DEBUG,07 Nov 2010 20:18:38,383,[OIMCP.DATC],Class/Method: DBFacade/getColumns - Data: Database Type Name: - Value: Oracle
DEBUG,07 Nov 2010 20:18:38,383,[OIMCP.DATC],Class/Method: DBFacade/getColumns - Data: Column Name: - Value: STATUS
DEBUG,07 Nov 2010 20:18:38,383,[OIMCP.DATC],Class/Method: DBFacade/getColumns - Data: Column Dataype integer value: - Value: 12
DEBUG,07 Nov 2010 20:18:38,383,[OIMCP.DATC],Class/Method: DBFacade/getColumns - Data: Column Size: - Value: 20
DEBUG,07 Nov 2010 20:18:38,383,[OIMCP.DATC],Class/Method: DBFacade/getColumns - Data: Table Name: - Value: USUARIOS_VIEW
DEBUG,07 Nov 2010 20:18:38,383,[OIMCP.DATC],Class/Method: DBFacade/getClumns - Data: Column Datatype Name: - Value: VARCHAR2
DEBUG,07 Nov 2010 20:18:38,383,[OIMCP.DATC],Class/Method: DBFacade/getColumns - Data: Database Type Name: - Value: Oracle
DEBUG,07 Nov 2010 20:18:38,383,[OIMCP.DATC],Class/Method: DBFacade/getColumns - Data: Column Name: - Value: ULTIMA_ATUALIZACAO
DEBUG,07 Nov 2010 20:18:38,383,[OIMCP.DATC],Class/Method: DBFacade/getColumns - Data: Column Dataype integer value: - Value: 93
DEBUG,07 Nov 2010 20:18:38,383,[OIMCP.DATC],Class/Method: DBFacade/getColumns - Data: Column Size: - Value: 7
DEBUG,07 Nov 2010 20:18:38,383,[OIMCP.DATC],Class/Method: DBFacade/getColumns - Data: Table Name: - Value: USUARIOS_VIEW
DEBUG,07 Nov 2010 20:18:38,383,[OIMCP.DATC],Class/Method: DBFacade/getClumns - Data: Column Datatype Name: - Value: DATE
DEBUG,07 Nov 2010 20:18:38,383,[OIMCP.DATC],Class/Method: DBFacade/getColumns - Data: Database Type Name: - Value: Oracle
DEBUG,07 Nov 2010 20:18:38,383,[OIMCP.DATC],Class/Method: DBFacade/getColumns - Data: Column Name: - Value: SENHA
DEBUG,07 Nov 2010 20:18:38,383,[OIMCP.DATC],Class/Method: DBFacade/getColumns - Data: Column Dataype integer value: - Value: 12
DEBUG,07 Nov 2010 20:18:38,383,[OIMCP.DATC],Class/Method: DBFacade/getColumns - Data: Column Size: - Value: 20
DEBUG,07 Nov 2010 20:18:38,383,[OIMCP.DATC],Class/Method: DBFacade/getColumns - Data: Table Name: - Value: USUARIOS_VIEW
DEBUG,07 Nov 2010 20:18:38,383,[OIMCP.DATC],Class/Method: DBFacade/getClumns - Data: Column Datatype Name: - Value: VARCHAR2
DEBUG,07 Nov 2010 20:18:38,383,[OIMCP.DATC],Class/Method: DBFacade/getColumns - Data: Database Type Name: - Value: Oracle
DEBUG,07 Nov 2010 20:18:38,383,[OIMCP.DATC],Class/Method: DBFacade/getClumns - Data: Columns: - Value: [com.thortech.xl.gc.impl.common.Column@187f99a, com.thortech.xl.gc.impl.common.Column@1428b7, com.thortech.xl.gc.impl.common.Column@17d39b5, com.thortech.xl.gc.impl.common.Column@57cf27, com.thortech.xl.gc.impl.common.Column@e1319f]
ERROR,07 Nov 2010 20:18:38,383,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/sendData encounter some problems: Attribute: matricula does not exist in the specified parent table/view: xladm.usuarios_view
com.thortech.xl.gc.exception.DBException: Attribute: matricula does not exist in the specified parent table/view: xladm.usuarios_view
     at com.thortech.xl.gc.impl.common.DBFacade.validateAttrExistence(Unknown Source)
     at com.thortech.xl.gc.impl.common.DBFacade.getSchema(Unknown Source)
     at com.thortech.xl.gc.impl.prov.DBProvisioningTransportProvider.getSchema(Unknown Source)
     at com.thortech.xl.gc.impl.prov.DBProvisioningTransportProvider.sendData(Unknown Source)
     at com.thortech.xl.gc.runtime.GCAdapterLibrary.executeFunctionality(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpINFO_GTC.GENERICADAPTER(adpINFO_GTC.java:125)
     at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpINFO_GTC.implementation(adpINFO_GTC.java:70)
     at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
     at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
     at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
     at com.thortech.xl.ejb.beansimpl.tcProvisioningOperationsBean.retryTasks(Unknown Source)
     at com.thortech.xl.ejb.beans.tcProvisioningOperationsSession.retryTasks(Unknown Source)
     at com.thortech.xl.ejb.beans.tcProvisioningOperations_b03yxm_EOImpl.retryTasks(tcProvisioningOperations_b03yxm_EOImpl.java:2719)
     at Thor.API.Operations.tcProvisioningOperationsClient.retryTasks(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.security.Security.runAs(Security.java:41)
     at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)
     at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
     at $Proxy93.retryTasks(Unknown Source)
     at com.thortech.xl.webclient.actions.ResourceProfileProvisioningTasksAction.retryTasks(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
     at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
     at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
     at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at com.thortech.xl.webclient.security.CSRFFilter.doFilter(Unknown Source)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)

What I usually do in situations like this is that I connect to the database using a sql client and the same connection information as I specified to OIM and see if the attribute is present.
Perhaps you got the wrong db name? Or schema name?
Everything looks good so most probably there simply is some little typo somewhere.
Hope this helps
/Martin

Oracle Database parameter

Similar Messages

Maybe you are looking for