Oracle DB Down / Need Assistance
Hello,
When I try to start our database I am getting the following errors.
ORA-01172: recovery of thread 1 stuck at block 22880 of file 28
ORA-01151: use media recovery to recover block, restore backup if needed
Questions
1) Are there any way to resolve these errors?
2) If not, we have dmp.Z exports that are backed up daily. What is the best way to restore these?
Note, I am an Oracle Newbie, but a quick learn.
Thanks for your help in advance.
[email protected]
Before performing a full recovery I suggest you see what object is stored in file 28 at block 22880. You can do this by querying dba_extents.
If the object is a user index then just drop and recreate the index.
If the object is a user table then if you can live with the contents of the table being different from you other tables then just drop and recreate this one table.
If the object is a SYS owned object you will probably need to go the full imp route.
Before relying on your exp you should check your export log and make sure the export did not fail and that you have a backup copy of the table data.
IMHO -- Mark D Powell --
Similar Messages
-
IMAC Intel Core 2 Duo -- from Blue Screen to Shut Down -- Need Assistance
I have the iMac 20-inch Intel Core 2 Duo.
Was on the internet last night and the computer completely locked up, got he spinning pinwheel, waited for about 5 minutes and tried a force quit with no luck. I shut it down and then powered it back up and only got to the blue screen. Shut it down again, same problem. Let it sit for a couple of hours to see if it would fully boot but nothing. Searched a bit on the apple support site and went with the reccomendation of trying to start in safe mode, got to the grey apple screen, then it went black and shut down on its own and has done that every time since.
I have unplugged everything several times, reset the PRAM and still nothing.
I have been getting the spinning pinwheel off and on over the past few weeks but a force quit would usually clear the application. I have been experiencing problems accessing hotmail lately so I have been clearing the history and deleting cookies, this has been the only way I have been able to access hotmail. Don't know if that has anything to do with this or not.
Additionally the computer has been gradually getting slower over the past few months. Didn't really think much of it at the time.
My biggest concern is losing the data I have saved on the hard drive right now. Getting the computer to work again would be nice too as I only bought it about a year and a half ago.
Any assistance or info greatly appreciated.
ThanksTake a look at these two articles: Startup issues http://support.apple.com/kb/TS1417
Gray screen at startup
http://support.apple.com/kb/TS2570 -
Oracle database down need help
My company is using a program called Digital Collections (DC4) from GMTI. We have an oracle database on the backend. Recently the server's raid array fan went out and we lost all 5 drives. We were able to recover some of the lost data from backup tapes but we can't seem to locate the oracle 8.0.5 install CD's. Now, I can only download 9i which as I understand will not access oracle 8 files. All the migration howto's start by dumping the data from oracle 8 and then importing to 9i. But if I don't have 8 running how can I dump the data? Does anyone know of a solution. Either a method or utility to dump the data from the raw files or a link to download 8.0.5 Any help will be greatly appreciated.
You can't attach oracle 8 version datafiles to 9i database or vice-versa. It was DBA's responsibility to keep the backups in case of disaster occurs at any time.
Check with your friends about the availability of oracle 8, you will get it, if you are lucky enough.
Jaffar -
Oracle Instance Failuer Need help to fix the problem
Hi
I am running Oracle9.2 on AIX. The data base got filed due to the following error and I am not getting where to start to dig into the error. The following are the mesg I found in alert log file. But i restarted it its now running But I dont want the same problem to repeat that's why I need assistance to debug the problem. Thanks
Sat Oct 1 21:11:06 2005
Errors in file /oracle/ABBA1/system/dump/udump/ABBA1_ora_65536.trc:
ORA-07445: exception encountered: core dump [] [] [] [] [] []
Sat Oct 1 21:11:10 2005
Errors in file /oracle/ABBA1/system/dump/udump/ABBA1_ora_64730.trc:
ORA-07445: exception encountered: core dump [] [] [] [] [] []
Sat Oct 1 21:11:13 2005
Errors in file /oracle/ABBA1/system/dump/udump/ABBA1_ora_29256.trc:
ORA-07445: exception encountered: core dump [] [] [] [] [] []
Sat Oct 1 21:11:16 2005
Errors in file /oracle/ABBA1/system/dump/udump/ABBA1_ora_74036.trc:
ORA-07445: exception encountered: core dump [] [] [] [] [] []
Sat Oct 1 21:11:18 2005
Errors in file /oracle/ABBA1/system/dump/udump/ABBA1_ora_24036.trc:
ORA-07445: exception encountered: core dump [] [] [] [] [] []
Sat Oct 1 21:11:20 2005
Errors in file /oracle/ABBA1/system/dump/udump/ABBA1_ora_58880.trc:
ORA-07445: exception encountered: core dump [] [] [] [] [] []
Sat Oct 1 21:11:22 2005
Errors in file /oracle/ABBA1/system/dump/udump/ABBA1_ora_24038.trc:
ORA-07445: exception encountered: core dump [] [] [] [] [] []
Sat Oct 1 21:11:25 2005
Errors in file /oracle/ABBA1/system/dump/udump/ABBA1_ora_65544.trc:
ORA-07445: exception encountered: core dump [] [] [] [] [] []
Sat Oct 1 21:11:28 2005
Errors in file /oracle/ABBA1/system/dump/udump/ABBA1_ora_74044.trc:
ORA-07445: exception encountered: core dump [] [] [] [] [] []
Sat Oct 1 21:11:31 2005
Errors in file /oracle/ABBA1/system/dump/udump/ABBA1_ora_24050.trc:
ORA-07445: exception encountered: core dump [] [] [] [] [] []
Sat Oct 1 21:11:34 2005
Errors in file /oracle/ABBA1/system/dump/udump/ABBA1_ora_55086.trc:
ORA-07445: exception encountered: core dump [] [] [] [] [] []
Sat Oct 1 21:11:37 2005
Errors in file /oracle/ABBA1/system/dump/udump/ABBA1_ora_59506.trc:
ORA-07445: exception encountered: core dump [] [] [] [] [] []
Sat Oct 1 21:11:40 2005
Errors in file /oracle/ABBA1/system/dump/udump/ABBA1_ora_58894.trc:
ORA-07445: exception encountered: core dump [] [] [] [] [] []
Sat Oct 1 21:11:43 2005
Errors in file /oracle/ABBA1/system/dump/udump/ABBA1_ora_59508.trc:
ORA-07445: exception encountered: core dump [] [] [] [] [] []
Sat Oct 1 21:11:46 2005
Errors in file /oracle/ABBA1/system/dump/udump/ABBA1_ora_65552.trc:
ORA-07445: exception encountered: core dump [] [] [] [] [] []
Sat Oct 1 21:11:49 2005
Errors in file /oracle/ABBA1/system/dump/udump/ABBA1_ora_24056.trc:
ORA-07445: exception encountered: core dump [] [] [] [] [] []
Sat Oct 1 21:11:52 2005
Errors in file /oracle/ABBA1/system/dump/udump/ABBA1_ora_65556.trc:
ORA-07445: exception encountered: core dump [] [] [] [] [] []
Sat Oct 1 21:11:55 2005
Errors in file /oracle/ABBA1/system/dump/udump/ABBA1_ora_64746.trc:
ORA-07445: exception encountered: core dump [] [] [] [] [] []
Sat Oct 1 21:11:58 2005
Errors in file /oracle/ABBA1/system/dump/udump/ABBA1_ora_74056.trc:
ORA-07445: exception encountered: core dump [] [] [] [] [] []
Sat Oct 1 21:12:01 2005
Errors in file /oracle/ABBA1/system/dump/udump/ABBA1_ora_55098.trc:
ORA-07445: exception encountered: core dump [] [] [] [] [] []
Sat Oct 1 21:12:04 2005
Errors in file /oracle/ABBA1/system/dump/udump/ABBA1_ora_74058.trc:
ORA-07445: exception encountered: core dump [] [] [] [] [] []
Sat Oct 1 21:12:07 2005
Errors in file /oracle/ABBA1/system/dump/udump/ABBA1_ora_59520.trc:
ORA-07445: exception encountered: core dump [] [] [] [] [] []
Mon Oct 3 10:25:56 2005
Errors in file /oracle/ABBA1/system/dump/udump/ABBA1_ora_23834.trc:
ORA-07445: exception encountered: core dump [] [] [] [] [] []
Mon Oct 3 10:27:32 2005
Errors in file /oracle/ABBA1/system/dump/udump/ABBA1_ora_38114.trc:
ORA-07445: exception encountered: core dump [] [] [] [] [] []
Mon Oct 3 10:28:29 2005
Starting ORACLE instance (normal)
Mon Oct 3 10:29:03 2005
Errors in file /oracle/ABBA1/system/dump/udump/ABBA1_ora_65696.trc:
ORA-07445: exception encountered: core dump [] [] [] [] [] []
Mon Oct 3 10:29:24 2005
Errors in file /oracle/ABBA1/system/dump/udump/ABBA1_ora_54902.trc:
ORA-07445: exception encountered: core dump [] [] [] [] [] []
Mon Oct 3 10:31:32 2005
Starting ORACLE instance (normal)
Mon Oct 3 10:31:33 2005
Errors in file /oracle/ABBA1/system/dump/udump/ABBA1_ora_55050.trc:
ORA-07445: exception encountered: core dump [] [] [] [] [] []
Mon Oct 3 10:32:07 2005
Shutting down instance: further logons disabled
Shutting down instance (immediate)
License high water mark = 26
All dispatchers and shared servers shutdown
Mon Oct 3 10:32:11 2005
ALTER DATABASE CLOSE NORMAL
Mon Oct 3 10:32:11 2005
SMON: disabling tx recovery
SMON: disabling cache recovery
Mon Oct 3 10:32:11 2005
Shutting down archive processes
Archiving is disabled
Mon Oct 3 10:32:11 2005
ARCH shutting down
ARC0: Archival stopped
Mon Oct 3 10:32:11 2005
ARCH shutting down
ARC1: Archival stopped
Mon Oct 3 10:32:12 2005
Thread 1 closed at log sequence 4026
Successful close of redo thread 1
Mon Oct 3 10:32:18 2005
Errors in file /oracle/ABBA1/system/dump/udump/ABBA1_ora_74172.trc:
ORA-00600: internal error code, arguments: [17175], [255], [], [], [], [], [], []
Mon Oct 3 10:32:19 2005
Errors in file /oracle/ABBA1/system/dump/udump/ABBA1_ora_74172.trc:
ORA-07445: exception encountered: core dump [] [] [] [] [] []
ORA-00600: internal error code, arguments: [17175], [255], [], [], [], [], [], []
Mon Oct 3 10:32:29 2005
Errors in file /oracle/ABBA1/system/dump/bdump/ABBA1_pmon_32534.trc:
ORA-00600: internal error code, arguments: [17175], [255], [], [], [], [], [], []
Mon Oct 3 10:32:29 2005
Errors in file /oracle/ABBA1/system/dump/bdump/ABBA1_pmon_32534.trc:
ORA-00600: internal error code, arguments: [17175], [255], [], [], [], [], [], []
Mon Oct 3 10:32:29 2005
PMON: terminating instance due to error 600
Instance terminated by PMON, pid = 32534
Mon Oct 3 10:33:46 2005
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
SCN scheme 3
Using log_archive_dest parameter default value
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 9.2.0.5.0.
System parameters with non-default values:
processes = 150
timed_statistics = TRUE
shared_pool_size = 117440512
large_pool_size = 16777216
java_pool_size = 117440512
control_files = /oracle/ABBA1/system/control01.ctl, /oracle/ABBA1/system/control02.ctl, /oracle/ABBA1/system/control03.ctl
db_block_size = 16384
db_cache_size = 318767104
compatible = 9.2.0.0.0
log_archive_start = TRUE
log_archive_dest_1 = LOCATION=/oracle/ABBA1/archive
log_archive_format = ABBA1_%T_%S.ARC
db_file_multiblock_read_count= 32
fast_start_mttr_target = 300
undo_management = AUTO
undo_tablespace = UNDOTBS1
undo_retention = 10800
remote_login_passwordfile= EXCLUSIVE
db_domain =
instance_name = oracle/ABBA1
dispatchers = (PROTOCOL=TCP) (SERVICE=oracle/ABBA1XDB)
job_queue_processes = 10
hash_join_enabled = TRUE
hash_area_size = 1048576
background_dump_dest = /oracle/ABBA1/system/dump/bdump
user_dump_dest = /oracle/ABBA1/system/dump/udump
core_dump_dest = /oracle/ABBA1/system/dump/cdump
sort_area_size = 1048576
db_name = ABBA1
open_cursors = 300
star_transformation_enabled= TRUE
query_rewrite_enabled = TRUE
pga_aggregate_target = 314572800
aq_tm_processes = 1
PMON started with pid=2
DBW0 started with pid=3
LGWR started with pid=4
CKPT started with pid=5
SMON started with pid=6
RECO started with pid=7
CJQ0 started with pid=8
QMN0 started with pid=9
Mon Oct 3 10:33:48 2005
starting up 1 shared server(s) ...
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
ARCH: STARTING ARCH PROCESSES
ARC0 started with pid=12
ARC0: Archival started
ARC1 started with pid=13
ARC1: Archival started
Mon Oct 3 10:33:49 2005
ARCH: STARTING ARCH PROCESSES COMPLETE
Mon Oct 3 10:33:49 2005
ARC0: Thread not mounted
Mon Oct 3 10:33:49 2005
ARC1: Thread not mounted
Mon Oct 3 10:33:49 2005
/* OracleOEM */ ALTER DATABASE MOUNT
Mon Oct 3 10:33:53 2005
Successful mount of redo thread 1, with mount id 1053693133
Mon Oct 3 10:33:53 2005
Database mounted in Exclusive Mode.
Completed: /* OracleOEM */ ALTER DATABASE MOUNT
Mon Oct 3 10:33:53 2005
/* OracleOEM */ ALTER DATABASE OPEN
Mon Oct 3 10:33:53 2005
LGWR: Primary database is in CLUSTER CONSISTENT mode
Thread 1 opened at log sequence 4026
Current log# 2 seq# 4026 mem# 0: /oracle/ABBA1/redo2/redo2_A.dbf
Current log# 2 seq# 4026 mem# 1: /oracle/ABBA1/redocopy/redo2_B.dbf
Successful open of redo thread 1
Mon Oct 3 10:33:54 2005
SMON: enabling cache recovery
Mon Oct 3 10:33:54 2005
Undo Segment 1 Onlined
Undo Segment 2 Onlined
Undo Segment 3 Onlined
Undo Segment 4 Onlined
Undo Segment 5 Onlined
Undo Segment 6 Onlined
Undo Segment 7 Onlined
Undo Segment 8 Onlined
Undo Segment 9 Onlined
Undo Segment 10 Onlined
Successfully onlined Undo Tablespace 1.
Mon Oct 3 10:33:54 2005
SMON: enabling tx recovery
Mon Oct 3 10:33:54 2005
Database Characterset is WE8ISO8859P1
replication_dependency_tracking turned off (no async multimaster replication found)
Completed: /* OracleOEM */ ALTER DATABASE OPEN
Mon Oct 3 10:34:17 2005
ORA-00130: invalid listener address '(ADDRESS=(PROTOCOL=TCP)(HOST=plpar00)(PORT=1521))'
Mon Oct 3 10:34:35 2005
Shutting down instance: further logons disabled
Shutting down instance (immediate)
License high water mark = 5
Waiting for dispatcher 'D000' to shutdown
All dispatchers and shared servers shutdown
Mon Oct 3 10:34:38 2005
ALTER DATABASE CLOSE NORMAL
Mon Oct 3 10:34:39 2005
SMON: disabling tx recovery
SMON: disabling cache recovery
Mon Oct 3 10:34:39 2005
Shutting down archive processes
Archiving is disabled
Mon Oct 3 10:34:39 2005
ARCH shutting down
ARC0: Archival stopped
Mon Oct 3 10:34:39 2005
ARCH shutting down
ARC1: Archival stopped
Mon Oct 3 10:34:39 2005
Thread 1 closed at log sequence 4026
Successful close of redo thread 1
Mon Oct 3 10:34:39 2005
Completed: ALTER DATABASE CLOSE NORMAL
Mon Oct 3 10:34:39 2005
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archiving is disabled
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archiving is disabled
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Mon Oct 3 10:34:49 2005
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
SCN scheme 3
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 9.2.0.5.0.
System parameters with non-default values:
processes = 150
timed_statistics = TRUE
shared_pool_size = 117440512
large_pool_size = 16777216
java_pool_size = 117440512
control_files = /oracle/ABBA1/system/control01.ctl, /oracle/ABBA1/system/control02.ctl, /oracle/ABBA1/system/control03.ctl
db_block_size = 16384
db_cache_size = 318767104
compatible = 9.2.0.0.0
log_archive_start = TRUE
log_archive_dest = /oracle/ABBA1/archive
log_archive_format = ABBA1_%T_%S.ARC
db_file_multiblock_read_count= 32
fast_start_mttr_target = 300
undo_management = AUTO
undo_tablespace = UNDOTBS1
undo_retention = 10800
remote_login_passwordfile= EXCLUSIVE
db_domain =
instance_name = oracle/ABBA1
dispatchers = (PROTOCOL=TCP) (SERVICE=oracle/ABBA1XDB)
job_queue_processes = 10
hash_join_enabled = TRUE
hash_area_size = 1048576
background_dump_dest = /oracle/ABBA1/system/dump/bdump
user_dump_dest = /oracle/ABBA1/system/dump/udump
core_dump_dest = /oracle/ABBA1/system/dump/cdump
sort_area_size = 1048576
db_name = ABBA1
open_cursors = 300
star_transformation_enabled= TRUE
query_rewrite_enabled = TRUE
pga_aggregate_target = 314572800
aq_tm_processes = 1
PMON started with pid=2
DBW0 started with pid=3
LGWR started with pid=4
CKPT started with pid=5
SMON started with pid=6
RECO started with pid=7
CJQ0 started with pid=8
QMN0 started with pid=9
Mon Oct 3 10:34:49 2005
I need assistance in this regard
ThanksIt will help if you have a look at Note:211909.1 in Metalink to understand why ORA-07445
Then have a look at the content of the trace files. e.g /oracle/ABBA1/system/dump/udump/ABBA1_ora_65536.trc to see if you can pick anything from the 'Current SQL statement' you will see in it (get help from Note:154170.1). This will at least give you an idea what SQL is causing the problem.
If they are your own application SQLs, then try to see if your team can fix the code. If they are System related or you cannot figure out what it is (even if it is from your own SQLs), I would suggest log a TAR with Oracle Support. -
INS-20802 Oracle Private Interconnect Configuration Assistant failed
Thought I would post what information I've gathered, after facing this error during install of RAC Grid Infrastructure 11.2.0.1 on Red Hat Enterprise Linux Server release 5.5 64-bit, as Oracle Support is once again unable to help. Maybe this will save someone else some time and the aggravation of dealing with lousy Oracle Support.
The error occurs after root.sh has successfully completed on all nodes. Oracle Net Configuration Assistant runs successfully, then Oracle Private Interconnect Configuration Assistant launches and subsequently fails with the following.
[INS-20802] Oracle Private Interconnect Configuration Assistant failed.
/u01/app/oraInventory/logs/installActions2010-12-13_01-26-10PM.log
INFO: Starting 'Oracle Private Interconnect Configuration Assistant'
INFO: Starting 'Oracle Private Interconnect Configuration Assistant'
INFO: PRIF-26: Error in update the profiles in the cluster
INFO:
WARNING:
INFO: Completed Plugin named: Oracle Private Interconnect Configuration Assistant
INFO: Oracle Private Interconnect Configuration Assistant failed.
INFO: Oracle Private Interconnect Configuration Assistant failed.
I was able to find another error that coincides with the PRIF-26 error: "CRS-2324:Error(s) occurred while trying to push GPnP profile. State may be inconsistent."
I was also able to duplicate the PRIF-26 error by trying to add a non-existent network interface via oifcfg:
./oifcfg setif -global jjj1/192.167.1.0:cluster_interconnect
PRIF-26: Error in update the profiles in the cluster
My best guess is the Oracle Private Interconnect Configuration Assistant makes a call to oifcfg. When oifcfg makes an update or adds a public/private interface, some XML files are also updated or maybe cross-referenced. These files are located here: <grid_home>/gpnp/<host>/profiles/peer
Any updates/changes/addtions to the private or public interfaces include changes for the Grid Plug-n-Play component, which uses the XML files. If the interface name is not contained in the XML files, my best guess is that triggers the "CRS-2324:Error(s) occurred while trying to push GPnP profile. State may be inconsistent.
I verified everything was configured correctly; the cluster verification utility reported everything was ok. I also ran the cluster verifcation utility against the GP-nP:
./cluvfy comp gpnp -verbose
I also reviewed the public and private interfaces via oifcfg and they are correct:
[oracle@ryoradb1 bin]$ ./oifcfg getif -global
eth0 10.10.2.0 global public
eth1 192.167.1.0 global cluster_interconnect
[oracle@ryoradb1 bin]$ ./oifcfg iflist -p
eth0 10.10.2.0 PRIVATE
eth1 192.167.1.0 UNKNOWN
My conclusion is the environment is configured correctly, in spite of the error generated by the Oracle Private Configuration Assistant.I understand that you have installed 11.2.0.1 not 11.2.0.2 because multicating must be enabled if you have installed 11.2.0.2 and you may face these sort of problems because cluster nodes would not be able to communicate with each other.
Please check ocssd.log especially on the first node because this file will give more inforamtion as to why first node is not able to push GPnP file. As you have executed cluvfy to confirm the GPnP but to confirm whether GPnP profile is accurate to just narrow down the problem, I would suggest you to try to start cluster in exclusive mode so that you can sure that GPnP profile is good.
Shutdown CRS on all nodes, if there is any hung processes then kill them before executing the fllowing command to start cluster in exclusive mode.
$GRID_HOME/bin/crsctl start crs -excl
If you are able to start cluster in exclusive then it is sure that GPnP is correct and then next step would be to verify the private network.
See how you goes.
FYI, I was recently analyzing the same sort of problems where cluster was not able to access GPnP profile and finally I found issues on my private network. Customer had enabled IGMP snooping, which was avoiding multicast communication over the private network but it was 11.2.0.2, which is not the case here.
Harish Kumar
http://www.oraxperts.com -
Security problem in oracle 9i Database Configuration Assistant
Inside the tool Oracle 9i Database Configuration Assistant there is an option by which you can make a "copy" of your Database. This "copy" is called a template and you don4t need any password or aunthentication to do it, you just need the tool to be installed in your server. Once you have a template, you can bring it anywhere and recreate the original database (including data). Again, you don't need any password or aunthentication to do it, further more, in the last step of this process you can change the password of any user (inluding SYS, SYSTEM or another DBA user). The thing about this is that anyone with access to the computer where the database is can make a template of it, take this template to another computer and recreate my database having FULL access to it (structure, data, code ...). And everything without needing any password!!!. I really thing that it is a big problem. Is there any way of preventing this operation?. How can I safely protect my database?. I thought about unistalling the product, but someone can re-install it and everything would be the same. Can someone give me an answer?
Thanks for everything.
Pablo CuencaYou must protect your database from casual browsing at the OS level. This is not a security hole, per se, since this is a known issue with any and all software. Database Configuration Assistant is not needed for this since one may copy the database without it.
-
Compiling a driver, need assistance on kernel source configuration
Hello BBS.
I am compiling a module for the Asus PCE N53 wireless pci-e card. I have obtained the driver source, and followed the instructions, and have gotten to the point where I need assistance. The instructions requires the kernel source, i have successfully obtained and configured it using the Command line prompt, except for one feature. I need to enable the intel IPW2200 driver code in the kernel source for this driver. What procedure do I follow to enable it?> I know in face value, that my request may seem odd. I just need to use the source of the kernel, not a new kernel... I have found that what I am requesting... will fix the problem, based on a Gentoo solution: http://forums.gentoo.org/viewtopic-t-93 … art-0.html. Needing to know how to configure the kernel source to enable the intel driver still stands. The source I am using is the latest arch kernel source.
===============
RT5592 Linux Driver quick start
====================
Check tools:
====================
*Before install driver, please check already install compile tool and kernel source code
1>Install compile tool
$yum install gcc-c++
2>check kernel source code exists /usr/src/kernels/ "kernel name"
Download your kernel source code
*http://www.kernel.org/pub/linux/kernel/
or
$yum install kernel-devel
====================
Build Instructions:
====================
1> $tar -jxvf DPO_GPL_RT5592STA_LinuxSTA_vx.x.x.x.tar.bz2
go to "DPO_GPL_RT5592STA_LinuxSTA_vx.x.x.x" directory.
2> In Makefile
set the "MODE = STA" in Makefile and chose the TARGET to Linux by set "TARGET = LINUX"
define the linux kernel source include file path LINUX_SRC
modify to meet your need.
3> In os/linux/config.mk
define the GCC and LD of the target machine
define the compiler flags CFLAGS
modify to meet your need.
** Build for being controlled by NetworkManager or wpa_supplicant wext functions
Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y'.
=> $wpa_supplicant -Dwext -ira0 -c wpa_supplicant.conf -d
** Build for being controlled by WpaSupplicant with Ralink Driver
Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n'.
=> $wpa_supplicant -Dralink -ira0 -c wpa_supplicant.conf -d
4> $make
# compile driver source code, need administrator.
# To fix "error: too few arguments to function ¡¥iwe_stream_add_event"
=> $patch -i os/linux/sta_ioctl.c.patch os/linux/sta_ioctl.c
5> $make install
#install driver
#copy RT2860STA.dat to /etc/Wireless/RT2860STA/RT2860STA.dat
6>$vi /etc/rc.d/rc.local
#input "ifconfig ra0 up"
$reboot
7> unload driver
$ifconfig ra0 down
$rmmod rt5592sta
======
Heres the output of my error, when I compile:
=======
make -C tools
make[1]: Entering directory `/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/tools'
gcc -g bin2h.c -o bin2h
make[1]: Leaving directory `/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/tools'
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/tools/bin2h
cp -f os/linux/Makefile.6 /home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/Makefile
make -C /home/white/linux-3.2.9 SUBDIRS=/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux modules
make[1]: Entering directory `/home/white/linux-3.2.9'
WARNING: Symbol version dump /home/white/linux-3.2.9/Module.symvers
is missing; modules will have no dependencies and modversions.
CC [M] /home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.o
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.c:2364:2: error: unknown field ‘private’ specified in initializer
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.c:2364:2: warning: initialization from incompatible pointer type [enabled by default]
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.c:2364:2: warning: (near initialization for ‘rt28xx_iw_handler_def.get_wireless_stats’) [enabled by default]
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.c:2365:2: error: unknown field ‘num_private’ specified in initializer
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.c:2365:2: warning: excess elements in struct initializer [enabled by default]
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.c:2365:2: warning: (near initialization for ‘rt28xx_iw_handler_def’) [enabled by default]
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.c:2366:2: error: unknown field ‘private_args’ specified in initializer
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.c:2366:26: warning: excess elements in struct initializer [enabled by default]
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.c:2366:26: warning: (near initialization for ‘rt28xx_iw_handler_def’) [enabled by default]
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.c:2367:2: error: unknown field ‘num_private_args’ specified in initializer
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.c:2367:2: warning: excess elements in struct initializer [enabled by default]
/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.c:2367:2: warning: (near initialization for ‘rt28xx_iw_handler_def’) [enabled by default]
make[2]: *** [/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/sta_ioctl.o] Error 1
make[1]: *** [_module_/home/white/driver/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux] Error 2
make[1]: Leaving directory `/home/white/linux-3.2.9'
make: *** [LINUX] Error 2
Last edited by confusedoldman (2012-12-25 20:14:34) -
HT201209 I need assistance with trying to figure out how to change my security code answer
I need assistance with trying to figure out how to change my security code answer
If you mean the answers to your security questions, then f
rom http://support.apple.com/kb/HT5665 :
If you have three security questions and a rescue email address
sign in to My Apple ID and select the Password and Security tab to send an email to your rescue email address to reset your security questions and answers (the steps half-way down that page should give you a reset link)
If you have one security question and you know your Apple ID passwordsign in to My Apple ID and select the Password and Security tab to reset your security question.
If you have one security question, but don't remember your Apple ID passwordcontact Apple Support for assistance. Learn more about creating a temporary support PIN to help Apple confirm your identity when you contact Apple Support.
If you can’t reset them via the above instructions (you won't be able to add a rescue email address until you can answer your questions) then you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312 -
My iPad screen went black suddenly and is not coming back on. However i can still hear sounds when there are notifications but nothing comes on the screen. It remains blank. What is the problem? I NEED ASSISTANCE A.S.A.P!!!
Try Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Hi...lags animations in games and messages and album pic..when disable assistive touch,it's true and fix..please release update to fix this in ios 7.1..i need assistive touch and fast game and animation booth!!
No Apple here, user to user forum.
I will not be releasing any version of iOS ever. -
I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network
Which version of OSX and what email provider are you using.
-
I'm uploading a photobook I made to be published. I need assistance in getting it to apple. The book is assembled and gets to the end of uploading when I get an error message, an error occurred while uploading. I have been trying all night. Help!
Welcome to the Apple Community.
I have seen previous versions mentioned in a pop up message before on iCloud.com, but I'm not really sure at all how it would help, as I couldn't get it to do anything.
The best advice I have at this time is to back up your work on your iOS device by regularly saving it to iTunes, if anything goes wrong you can then either load it into the numbers app again on the device or recover it via iTunes on your computer.
My syncs are immediate, I never get chance to see if it works in the background, sorry. -
Oracle 9i database configuration assistant cannot be launched
After install 10g ODP.net and Oracle Developer Tools for Visual Studio .NET with ODAC components, the Oracle 9i database configuration assistant program cannot be launched.
Never had this problem before, but this is usually becos of jre version incompatibility. Changing CLASSPATH env might help.
-
Oracle 9i database configuration assistant hungs
Hi,
Oracle 9i database configuration assistant hungs at a point "creating and starting oracle instance" on my solaris machine
Hence I am unable to create database .
Your help in solving this problem will be highly appreciated.
TIA,
-AmolNever had this problem before, but this is usually becos of jre version incompatibility. Changing CLASSPATH env might help.
-
Down Payment Assistance Program
I recently was able to help a client who purchased a house with down payment assistance programs. The new dallas home was found on Aleman Realtors website where he search the MLS free. We paired him up with a lender who was able to assist him in purchasing a home with the new home buyer program and he was very please as a first time home buyer this home was purchased with zero down payment and at closing he actually recieved $1000 cash back and keys to his new home. If anyone wants assistance with information regarding this I can get you the info to the mortgage officer for our new home buyer. Its amazing that these programs exist and work as a benefit for families starting out as first time home buyers. If you want to search the mls free and find homes in the plano area, new homes in frisco, realtors in frisco, realtors in plano visit AlemanRealtors
Take your revolvers to only one carrying a balance of no more than 9% of its indvidual CL this will help give you the best Fico score, you will have to play with the actual amount you let report to see where your score is best,. I also removed your cross post in the mortgage forum, its against our rules to post same topic in multi forums, thanks for your understanding on this.
Maybe you are looking for
-
LSMW - source file from Logical Path and Files?
Hi, When specifing the source file (legacy data) you want to use to load from - you can choose a file from the application server. For the application server file does anyone know is there anyway that you can use a logical path and file to represent
-
SOAPException: faultCode=SOAP-ENV:Protocol; msg=Missing content type
I have a WSDL file for which I have created a Web Service stub/skeleton through jdeveloper(version 10.1.2.3.0). Below is the complete code which has been generated by developer. Now whenever i try to run this file in jdeveloper I get the following ex
-
Cannot export responses to Excel or PDF
I have tried exporting responses to Excel, and when I click Ok to save it, Internet Explorer crashes. The same thing happens when I try to export the detailed view to PDF. I'm using Windows 7, IE 8, and the free version of FormsCentral. I'm not sure
-
How to protect an encryption key in a usb key?
Hello, I have to use a 16 bytes key to encrypt the communication between my PC and an external device. I would like to put this key in a USB stick to avoid hardcoding this key in my application. I'm wondering how to do that. Is there any technology p
-
Uploading word document in sap(as a attachment)
Hello all, I want to upload a word file into sap server. How can i do this. Pls guide me... I want to save this word file in sap as a attachment and use this attachment in future. Please guide me...