Oracle.discoiv.beans.proxy.exceptions.EulException
Dear All,
When i tried to publish the sample portlets packaged with Dicoverer i got the following exception :
Error:
A Discoverer error occurred trying to perform the current operation. Please contact your iAS administrator for help. null; nested exception is: oracle.discoiv.beans.proxy.exceptions.EulException
any help will be appreciated
Did you upgrade your Discoverer installation after installing it as part of Oracle9iDS / 9iAS?
The version that is shipped with the application server is 9.0.2.39
You should upgrade to Discoverer 9.0.2.54.x to get the latest patch, with stability and performance improvements, as well as some bug fixes.
The Discoverer Administrator version used to create the EUL should be the same as the version of Discoverer installed on Oracle9iAS.
Regards
Discoverer Product Management
Similar Messages
-
Revision: 10462
Author: [email protected]
Date: 2009-09-21 10:39:02 -0700 (Mon, 21 Sep 2009)
Log Message:
Exclude any properties in the Bean proxy that are classloaders.
Certain application servers put classloaders in Exceptions, which we should ignore.
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/io/BeanProxy.javaRevision: 10462
Author: [email protected]
Date: 2009-09-21 10:39:02 -0700 (Mon, 21 Sep 2009)
Log Message:
Exclude any properties in the Bean proxy that are classloaders.
Certain application servers put classloaders in Exceptions, which we should ignore.
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/io/BeanProxy.java -
I tried Oracle Java Bean for getting client IP but keep getting 127.0.0.1
We implemented Oracle Java Bean demo that reads client
information as we need to know the IP address of the client.
Everything works fine except that we keep getting the loopback
address (127.0.0.1) instead of the client IP address.
Any advice?I figured out what was happening and thought I should post the resolution in case it helps someone else.
I have both the original ToyStore app and my new app running against the same schema. Fine so far, since they don't use the same table names and this is just for early development.
The problem comes because they also use the same schema for maintaining the "Stateful" release mode. So they were both accessing the PS_TXN table to maintain state. For some reason, this worked for a while, but started failing yesterday. Clearing out the PS_TXN table when switching apps solved the problem.
Clearly the admonition to use a separate schema for the internal connection used by the state management logic is a wise one! :-)
Dennis -
I need to know how to set proxy exception list on remote pcs that are not on a domain controller
I currently manage approx 1,800 computers on a vpn network. They are not part of any AD. There are mixed service packs of XP mostly SP2 and SP3. They all access the internet via a proxy server. They are all running either IE6 (not many left) or IE8. I have
wrote a script to change the proxy exception list but not all of them have worked I have changed the following reg keys [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings] & [HKEY_USERS\.DEFAULT\Software\Microsoft\Windows\CurrentVersion\Internet
Settings] & [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings]. It seems in the ones that have not changed, the local SID account is the one in use and this has not changed because of its uniqueness. Is there a way either
scripting or a commercial package that I can use to write keys to ALL users. I'm not sure on the details of how to use local policy to set this or how I would be able to write a script that would import the settings from a text file or something. Can anyone
help with this matter.
ThanksWell that is certainly not an easy task.
.Default is not the default user account. I do not recommend making changes there. HKLM is for the local machine which is probably your best bet for all users but if it is not propagating through that then it would have to be the current user since they
are not logged into a domain.
There is a way to update all the HKCU and there is a walk through here:
http://micksmix.wordpress.com/2012/01/13/update-a-registry-key-for-all-users-on-a-system/
Making this management simple I'd suggest joining a domain and using GPO but I understand if it is not an option. -
ABAP proxy exception to SOAP fault and vice versa not getting mapped
Hi there,
I have these scenario's: ABAP proxy to SOAP (AXIS framework) and the other way around, synchronous, using AAE.
When declaring the Synchronous Service interfaces we also defined error message types in order to pass system and application exceptions back to the service consumers.
The behavior we are observing is as follows;
When an exception is generated on the ABAP proxy, the error message type is correct generated and filled with the corresponding values in the ABAP proxy runtime. However, when the response arrives at the service consumer, it only contains a SOAP fault filled with some kind of generic PI mapping exception information.
1. Why is the original ABAP proxy exception not mapped/passed into the SOAP response?
2. What can we do in order to change that situation?
3. Does it has to do with the use of the AAE - Advanced Adapter Engine or the AXIS framework?
PS: We have performed a test of the Operation Mapping - OM using the ABAP exception as input and it did work correctly, so the error structure seems to be Ok.
Many thanks for your replies.
Edited by: Roberto Viana on Jul 26, 2010 8:30 PMProblem was caused by some differences in namespaces between source and target.
-
Hello,
I'm using the OracleAS MapViewer Bean in my JSP application. As said in the use guide, this Bean is used for all maps created during the current session. But for me, it's a problem because when I close a first map (with addPointFeature, addWMSMapTheme and addJDBCTheme functions) and want to create a second one (with the same functions but with another data), information of the firsts is always there.
Does anyone know how to put the scope of the Bean to page and not still to session?
(As in the tag
<jsp:usebean
id="BeanName"
class="com.XXX.class"
scope="page">
</jsp:usebean>
Thanks in advance.The API has methods (such as deleteAllThemes, removeAllPointFeatures) to clean your current request. You can use these methods before creating the second map.
-
Hi,
My interface is ABAP Proxy to JDBC.
I generated ABAP proxy, when iam going to activate that I am getting vendor not specified.
I am getting Exception : Proxy Exception of class CX_SRT_WSP_ICF.
Please provide solution for this issues and help me.
I am very much glad to you.
ThanksHi Sajjid,
Check out similar thread ABAP Proxy Activsation Error .
Also have a look at /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies and confirme you have not missed anything.
Regards,
Sunil Chandra -
Oracle iPlanet Web Proxy Server 4.0.14 not getting started.
bash-3.00# ./start
ld.so.1: parsexml: fatal: relocation error: file parsexml: symbol __RTTI__1nMXMLException_: referenced symbol not found
ld.so.1: parsexml: fatal: relocation error: file parsexml: symbol __RTTI__1nMXMLException_: referenced symbol not found
ld.so.1: parsexml: fatal: relocation error: file parsexml: symbol __RTTI__1nMXMLException_: referenced symbol not found
ld.so.1: parsexml: fatal: relocation error: file parsexml: symbol __RTTI__1nMXMLException_: referenced symbol not found
Oracle iPlanet Proxy Server 4.0.14 B06/08/2010 05:46
failure: CORE3170: Configuration initialization failed: Error running init function load-modules: dlopen of /export/home/Oracle_Proxy/bin/proxy/lib/libj2eeplugin.so failed (ld.so.1: proxyd: fatal: libjvm.so: open failed: No such file or directory)
bash-3.00# uname -r
5.10
bash-3.00# uname -a
SunOS sunfire-v240 5.10 Generic_118822-25 sun4u sparc SUNW,Sun-Fire-V240
bash-3.00#
The web proxy server version is 4.0.14 and the package i used is "Oracle-iPlanet-Web-Proxy-Server-4.0.14-sparc.zip"
Please help me. If any other information is needed, please let me know.Your proxy instance should start. The error you are seeing should only be for the admin server. Add the location of where your jvm.so is located to the LD_LIBRARY_PATH. The jvm.so is located under the JDK directory.
-
Migrate certificate 3.x to Oracle iPlanet Web Proxy Server 4.0.20
Hi
I try to migrate from Sun iPlanet Web Proxy Server(SPWPS) 3.6 to Oracle iPlanet Web Proxy Server(OPWPS) 4.0.20 and I have some problem.
I have an instance in SPWPS-3.6 with SSL certificate, when I migrate it to OPWPS-4.0.20 using the admin interface, the certificate
is not migrate with this error message :
Migrating Keys and Certificates...
[Error] The password entered for the key is not valid
Assimilation failed.
But I am sure to enter the right password.
After that I manage the new instance in administration interface, and in Security Panel, there is a choice to "Migrate 3.x certificate"
I try this, but I get this error message
Incorrect Usage
The password entered is not valide
Can somebody help me to resolve this problem ?
Thanks in advance.Your proxy instance should start. The error you are seeing should only be for the admin server. Add the location of where your jvm.so is located to the LD_LIBRARY_PATH. The jvm.so is located under the JDK directory.
-
Oracle configuration manager proxy setting
Hello,
I m trying to install Agent speratly using this file
"Linux_Grid_Control_agent_download_10_2_0_2_0"
after unzip and using runninstaller......
but durring asking the configuration it ask for the
"oracle configuration manager proxy setting"
even it is opptional and i hav not checked it .... it is not going next.
i dont want to configure it (but when i give values proxy ip and port, not accept it).
plz solve this issue
Thanx.Whats error it throw on pressing next
please paste the install action log -
I am trying to build some code which needs oracle.ifs.beans and oracle.ifs.clients packages and classes. I have downloaded the following:
OracleAdministrativeClientUtility
OracleApplicationServer
OracleContentManagementSDK
OracleIIOPClientLibrary
OracleJDeveloper
OracleRMIClientSideLibrary
OracleSOA
OracleWebServicesClientLibrary
None of these appears to contain the oracle.ifs packages.oracle.ifs.beans and oracle.ifs.clients packages are for the Oracle Internet File System. Are the following JAR files available?
repos.jar
adk.jar -
Internet Explorer 10 / 11 breaks Microsoft's group policies for proxy exceptions?
At one of our larger sites we've started experiencing a major issue with one of our collaborative web servers in that piles of users whose systems have automatically updated to Internet Explorer 10 are not adding the sites we've deployed via group policy
to the proxy exceptions to their proxy exceptions (Internet Options | Connections | LAN settings | Advanced).
So basically we deploy a number of subnets and domain names to our proxy exceptions list and after our support center blew up with calls concerning random issues, I had the admins compile a list of affected and unaffected systems contrasting various items
and we noticed the one similarity was Internet Explorer 10. Thousands of unaffected systems have Internet Explorer 8 / 9 while all those affected have Internet Explorer 10.
Is there a new way to deploy proxy exceptions? We thought about forcing them down via registry keys but felt there must be a less obtrusive method and maybe something is wrong.Hi,
Did you configure these original settings with IEM?
Any settings that you previously configured with IEM will no longer work on computers where Internet Explorer 10 or newer is installed, regardless of the Windows version it’s been installed on.
You can configure the proxy settings with “Internet Settings Group Policy Preferences” or on the
Proxy Settings page of IEAK 10.
Please refer to:
Replacements for Internet Explorer Maintenance
http://technet.microsoft.com/en-us/library/jj890998.aspx
Here is a new deployment guide for IE 10, would like to share with you:
Internet Explorer 10 Deployment Guide
http://technet.microsoft.com/en-us/library/jj822335.aspx
Regards,
Yolanda
Yolanda
TechNet Community Support -
HI,
I am running 9i on NT on clicking through the ultrasearch admin
screens I intermittently get the following error
oracle.context.isearch.admin.exception.DBSetException
at
oracle.context.isearch.admin.util.AdminObject.handleBackEndExcept
ion(AdminObject.java:258)
at
oracle.context.isearch.admin.users.InstanceManager.hasWkAdminRole
(InstanceManager.java, Compiled Code)
at
ultrasearch.admin._sources._sources__table__new1._jspService
(_sources__table__new1.java, Compiled Code)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java,
Compiled Code)
at oracle.jsp.app.JspApplication.dispatchRequest
(JspApplication.java, Compiled Code)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java,
Compiled Code)
at oracle.jsp.JspServlet.internalService
(JspServlet.java, Compiled Code)
at oracle.jsp.JspServlet.service(JspServlet.java,
Compiled Code)
at javax.servlet.http.HttpServlet.service
(HttpServlet.java:588)
at org.apache.jserv.JServConnection.processRequest
(JServConnection.java, Compiled Code)
at org.apache.jserv.JServConnection.run
(JServConnection.java, Compiled Code)
at java.lang.Thread.run(Thread.java, Compiled Code)
I have to then return to the login in screen and login again to
access the admin pages.
Any ideas?
Thanks
Joel.Does the exception occur out of the blue while you are actively
performing admin operations? Or does it happen, like, say, after
a certain period of inactivity? -
Unable to log into Discoverer Plus - oracle.discoiv.connections.Connection
Hello,
Discovoerer Plus and Viewere were working fine last week and today an attempt to login gives this error on the page:
A connection error.
- error while creating the session, check for other errors.
- oracle.discoiv.connections.ConnectionStoreException: weblogic.common.resourcepool.ResourceDeadException: 0: Could not connect to 'oracle.jdbc.OracleDriver'. The returned message is: ORA-01017: invalid username/password; logon denied It is likely that the login or password is not valid. It is also possible that something else is invalid in the configuration or that the database is not available.
- weblogic.common.resourcepool.ResourceDeadException: 0: Could not connect to 'oracle.jdbc.OracleDriver'. The returned message is: ORA-01017: invalid username/password; logon denied It is likely that the login or password is not valid. It is also possible that something else is invalid in the configuration or that the database is not available.
- weblogic.common.resourcepool.ResourceDeadException: 0: Could not connect to 'oracle.jdbc.OracleDriver'. The returned message is: ORA-01017: invalid username/password; logon denied It is likely that the login or password is not valid. It is also possible that something else is invalid in the configuration or that the database is not available.
unable to retrieve connection list
- Cannot retrieve connection list. Check the Discoverer application log for more details.
JFYI
Discoverer is installed on the same server as EBS 12i.
Last week we had issues when EBS promoted us to change the passwords of apps, SYSADMIN, APPLSYSPUB and even that of EUL4_US in the system. I am wondering which of these changes could have had an impact on Discoverer. How do I get ebs to recognize the new password of EUL4_US?
ThanksHi Mathias
Let me answer at least a couple of your issues:
+3) I have installed Oracle Discoverer Administrator on an XP manchine but at startup, it doesn't display the "Applications checkbox". Did I miss this during installation and can I simply reinstall?+
EUL5_US connects find at this window and I am greeted with the Load Wizard Step 1. Does it mean that to connect as sysadmin, I have to reinstall this BI Discoverer?
You have to enable Discoverer Admin in APPS mode, it does not do it automatically. To do that follow this workflow:
1. Connect to Discoverer Admin as EUL5_US
2. On the Load Wizard Step 1 click the Cancel button
3. From the menu bar select Tools | Options and navigate to the Connection tab
4. Check the button labeled Connect to both standard and application EULs
5. In the box labeled Gateway User enter: applsyspub/pub
6. In the box labeled Foundation Name enter: apps
7. Click the OK button
8. From the menu bar select File | Connect
9. This time you should see the Oracle Applications User check box.
On the XP machine you need to also have the DBC file and tnsnames files. Here's how to enable the DBC security:
1. Create a folder under c:\Oracle called Secure so that you could have: c:\oracle\secure
2. Place your DBC file in this folder
3. Launch Control Panel
4. Select System | Advanced System Settings - this opens the System Properties box
5. Click the Environment Variables button - this opens the Environment Variables box
6. In the bottom half of the screen, labeled System variables click the New button - this opens the New System Variable box
7. In Variable Name enter: FND_SECURE
8. In Variable Value enter: c:\oracle\secure
9. Click the OK button to close the New Variable box
10. Click the OK button to close the Environment Variables box
11. Click the OK button to close the System Properties box
12. Close Control Panel
This should get Discoverer Admin working. Can you check and let me know?
As far as I know there are no additional passwords. If Discoverer Admin can be made to work using SYSADMIN then there is a setup issue on the server. Most likely the FND_SECURE is not picking up the location for the DBC but let's tackle that once we get Admin working.
Best wishes
Michael -
Oracle BI Scheduler raised exception while exporting report by iBot and cus
Hi,
I have the issue. When I export BI report using iBot and Java program(BI Publisher Java API) - Oracle BI Scheduler raised exception.
Platform:
OBIEE 10.1.3.4 on aix 5.3.0.0
See the captured log below and any suggestion to fix this will be greatly appreciated.
- javahost.out.log
Sep 23, 2009 2:46:35 AM SchedulerComponentLoad load
INFO: Loading config ...
Sep 23, 2009 2:46:35 AM SchedulerComponentLoader load
WARNING: Scheduler RPC components is disabled due to incorrect configuration.
Sep 23, 2009 2:46:35 AM ApplicationImpl init
INFO: Running configuration:
JVM=IBM J9 VM(2.3)
Listener.Port=9810
Listener.PermittedClientList=*
Listener.Address=null
JobManager.MinThreads=100
JobManager.MaxThreads=100
JobManager.MaxPendingJobs=100
JobManager.IdleThreadTimeoutMls=300000
MessageProcessor.SocketTimeoutMls=5000
Charts.InputStreamLimitInKB=1024
Charts.RequestResponseLogDirectory=/oracle/oraclebidata/tmp
Chart.Enabled=true
Chart.InputStreamLimitInKB=1024
Chart.ChartRoot=/oracle/oraclebi/corda50/chart_root
Chart.CordaRoot=/oracle/oraclebi/corda50
Chart.EnableConsoleOutput=false
Chart.EnableXmlValidation=true
Chart.MaxAttributeLength=127
Batik.InputStreamLimitInKB=1024
Batik.RequestResponseLogDirectory=/oracle/oraclebidata/tmp
Batik.EnableXmlValidation=false
Scheduler.Java.Enabled=false
Scheduler.Java.DefaultUserJarFilePath=null
Scheduler.Java.PurgePeriod=0
Scheduler.Java.TempPath=null
XMLP.InputStreamLimitInKB=8192
XMLP.RequestResponseLogDirectory=/oracle/oraclebidata/tmp
OBISAuthenticatorProxy.InputStreamLimitInKB=128
OBISAuthenticatorProxy.RequestResponseLogDirectory=/oracle/oraclebidata/tmp
OBISAuthenticatorProxy.ClassName=oracle.bi.server.customauthenticatorimpl.javahostrpccall.DisabledAuthenticator
Sep 23, 2009 2:46:35 AM Main main
INFO: Listening for new connections
Sep 23, 2009 3:01:56 AM RpcSchedulerJob processMessage
WARNING: Error
java.lang.NullPointerException
at java.io.File.<init>(File.java:220)
at com.siebel.analytics.scheduler.javahostrpccalls.SchedulerJavaUtil.getMaxCount(SchedulerJavaUtil.java:118)
at com.siebel.analytics.scheduler.javahostrpccalls.SchedulerJavaUtil.makeUniqueFileName(SchedulerJavaUtil.java:109)
at com.siebel.analytics.scheduler.javahostrpccalls.SchedulerJavaUtil.readJobInfo(SchedulerJavaUtil.java:68)
at com.siebel.analytics.scheduler.javahostrpccalls.RpcDisabledSchedulerJob.processMessageInternal(RpcDisabledSchedulerJob.java:36)
at com.siebel.analytics.javahost.AbstractRpcCall.processMessage(AbstractRpcCall.java:107)
at com.siebel.analytics.javahost.MessageProcessorImpl.processMessage(MessageProcessorImpl.java:175)
at com.siebel.analytics.javahost.Listener$Job.run(Listener.java:223)
at com.siebel.analytics.javahost.standalone.SAJobManagerImpl.threadMain(SAJobManagerImpl.java:205)
at com.siebel.analytics.javahost.standalone.SAJobManagerImpl$1.run(SAJobManagerImpl.java:153)
at java.lang.Thread.run(Thread.java:810)
- nqscheduler.out.log
[Util Logger] Exception occured:
Severity:Not set
Type:const saw::Exception *
+ File:/net/sdcb80a022/vol1/users/anabuild/views/nightly/Tue/101341/AIX/vobs/090414.1900/analytics_web/main/project/webcomm/rpc.cpp+
Line:371
Message:A fatal error occurred while processing the request. The server responded with: Error while executing RpcSchedulerJob.processMessage
java.lang.NullPointerException
at java.io.File.<init>(File.java:220)
at com.siebel.analytics.scheduler.javahostrpccalls.SchedulerJavaUtil.getMaxCount(SchedulerJavaUtil.java:118)
at com.siebel.analytics.scheduler.javahostrpccalls.SchedulerJavaUtil.makeUniqueFileName(SchedulerJavaUtil.java:109)
at com.siebel.analytics.scheduler.javahostrpccalls.SchedulerJavaUtil.readJobInfo(SchedulerJavaUtil.java:68)
at com.siebel.analytics.scheduler.javahostrpccalls.RpcDisabledSchedulerJob.processMessageInternal(RpcDisabledSchedulerJob.java:36)
at com.siebel.analytics.javahost.AbstractRpcCall.processMessage(AbstractRpcCall.java:107)
at com.siebel.analytics.javahost.MessageProcessorImpl.processMessage(MessageProcessorImpl.java:175)
at com.siebel.analytics.javahost.Listener$Job.run(Listener.java:223)
at com.siebel.analytics.javahost.standalone.SAJobManagerImpl.threadMain(SAJobManagerImpl.java:205)
at com.siebel.analytics.javahost.standalone.SAJobManagerImpl$1.run(SAJobManagerImpl.java:153)
at java.lang.Thread.run(Thread.java:810)
Edited by: user8096018 on Sep 23, 2009 5:40 AMI am also having the same issue......Can some body help me please? Thanks
Maybe you are looking for
-
How can we disable user to login Hyperion Workspace
We understand we can set to admin mode for Hyperion Planning so that only administrator can login the system. Any other ways to disable users to login Hyperion Workspace? We are using Hyperion version 11.1.1.1 Thanks a lot!
-
Missing Plug-ins - Package And Preflight.APLN from InDesign Document
If a user creates a file in InDesign CC and then tries to open it in InCopy CS6 they get the following error. Missing Plug-ins, Cannot Open File PACKAGE AND PREFLIGHT.APLN The Doument "filename.indd" uses one or more plug-ins which are not currently
-
Downloaded v8.0.1 got 'unable to connect" with every url
FF worked prior to upgrade. This version works on another laptop on the same network. I have Comcast HS wireless network. Also have Norton anti-virus through Comcast.
-
Imprimir en PDF desde servidor w2003
Desde un servidor windows 2003 intento imprimir en una estación de red como archivo de impresora adobe pdf, pero no puedo. En las impresiones en red sobre papel todo funciona ok. La estación de destino esta dada de alta la impresora adobe pdf y en lo
-
Migrate database oracle 9i to oracle 10g
Hi, How to migrate oracle database from oracle 9i to oracle 10g