Oracle dveloper suit 10g r2 with db 11

hello,
i have installed Oracle Database 11 into my linux box and its working fine :)
now after i downloaded oracle Developer suit 10g R2 , it does complain about the database version while installing ( it says it doesn;t work with DB 9 or higher )
so any idea?
regards.

Pl see ML Doc 403347.1
HTH
Srini

Similar Messages

Using Oracle Developer Suite 10g with the 10g Express Edition Database

I'm new to Oracle and I'm taking an SQL college level course using a text book entitled "Guide to Oracle 10g". Our text book came with Oracle Developer Suite 10g (9.0.4.0.1) but no database. We adopted the 10g Express Edition (XE) as the database. I have both the database and the Developer Suite loaded on Windows XP Pro. I've been using the database for months now and it runs fine and the Developer Suite installed OK.
However, I would like to use some of the Developer Suite apps (for learning purposes) with the database but I can't seem to log on to the database through the Developer apps when I open them and use my 10g XE database user-name and password. For starters, I would like to see if I could use the edition of SQLPlus (release 9.0.1.4.0) that comes with the Developer Suite because it has configuration options that are not available in the SQLPlus command line version that 10g XE contains (which otherwise works fine).
When I open SQLPlus (Developer Suite Version) and try to log on with my database user name and password (and no host string), I get the error:
ORA-12560: TNS:protocol adapter error
I did search the discussion forum first and also reviewed some Oracle pdf's including the concepts pdf but came up empty. I would greatly appreciate any suggestions on how to succeed or a determination of the compatibility of 10g XE with the Developer Suite. Thanks kindly.

I think your last idea might be helpful at this point and in case it matters, they are both installed on a sinlge machine (laptop). Thanks in advance:
Here is the Developer Suite tnsnames.ora:
# TNSNAMES.ORA Network Configuration File: C:\DevSuiteHome\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = HOSTNAME)(PORT = 1521))
(CONNECT_DATA =
(SID = PLSExtProc)
Here is the 10G XE tnsnames.ora:
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = obw)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
)

Problem with Oracle Developer Suite 10g

Hi,
I have installed Oracle Developer Suite 10g. When I try to open the rdf file with the report builder, the error message "REP-0756: Warning: Unable to find PL/SQL library 'SHARE_RP'" shown.
Does anyone know how to resolve this? Thanks!

Try this thread: REP-0756: Warning: Unable to find PL/SQL library 'FARSV' and 'fadolif'

Oracle Oracle SOA Suite 10g (10.1.3.1.0) with Oracle Forms

I need run an Oracle Forms 6i application on then web, after migration process that convert modules to Oracle Forms 10g modules, can i run my application on the Oracle Application Server latest version (Oracle Oracle SOA Suite 10g (10.1.3.1.0))?

Forms and reports is not included in the 10.1.3 release - so you need to deploy Forms and reports on 10.1.2 and 10.1.3 on a different installation home. Next release of Forms will be 11
Regards
Grant

Oracle Application Server 10g R3 with patch set 10.1.3.5.0

Hi All,
Can anyone help me on this, When I install Oracle Application Server 10g Release 3 (10.1.3.1.0) and patch set 10.1.3.5.0 on Linux. I am not able to find forms and reports container.
This version doesn't support forms and reports or I have go OAS 10g R2 (10.1.2.0.2) with patch set 3 (10.1.2.3.0). What is the difference between these two releases.
Please help me.
Regards,

Hi James,
1)Yes it supports IE 8 .Please review the below link for certification details on browers :-
    http://www.oracle.com/technetwork/middleware/ias/downloads/as-certification-r2-101202-095871.html#BAJGCBEA
     Note: Oracle Application Server supports only those browsers.
2)Forms only support Windows 7 32 bit only.
    Please refer to the note:1292919.1 "Certification of Oracle Developer Suite 10g (10.1.2) on Windows 7 (32-bit)"
3)Could you provide more information of JVM because when you install 10gR2 it has JDK and JRE present in it.
Regards,
Prakash.

Problems installing Oracle Developer Suite 10g in windows 7

Hi Experts;
I have installed Oracle Developer Suite 10g in windows XP, but now I change to windows 7, 64 bits, I was trying to install this product and I'm having a lot of problems, apparently this product is not compatible with windows 7.
My question is, is there any product, like Oracle Developer Suite 10g for windows 7? I was looking for in the Oracle page, and I couldn't see anything, may be the name is diferent.
Thanks for your help.
Al

First off, Oracle Developer Suite (ODS) 10g is no longer supported so Oracle has discontinued improving the product. While ODS is not certified by Oracle for use on Windows 7 (32 or 64 bit), you can install and use on Windows 7 (32/64 bit). This is a commonly asked question so a search of the forum would have given you several solutions.
The limitations of the Oracle installer are:
1. You must have Administrator rights to install.
2. Windows 7 is not a supported version (it's version 6 and it is looking for version 5), so the installer exits.
3. It's unable to recognize Windows Managed virtual memory.
To get around these limitations you must do the following:
1. Modify your Virtual Memory settings and define a specific Min and Max amount. Look at this MS article if you need help making this change: http://windows.microsoft.com/en-us/windows7/change-the-size-of-virtual-memory
2. You must run the Oracle installer in compatibility mode for Windows XP. To do this,
- Right-click on the setup.exe and select the Compatibility tab and click "Run this program in compatibility mode for: Windows XP SP2"
3. While still in the properties and the compatibility tab, select the option, "Run as Administrator" and click OK.
Now run the Oracle setup.exe and your installation should succeed.
Craig...

Unable to start Oracle Soa suite 10g on Windows 7

I am able install oracle soa suite 10g on Windows7 platform. But I am unable to start Oracle Soa Suite 10g. Wenever I am starting the SOA suite a new window is popping up the default color scheme of windows 7 is getting changed, but after that this window is disappearing without showing any error. From the task manager console I can see that a javaw process is getting started, but this opmn process is not getting started.
System configuration -
OS : Windows7
RAM: 2 GB
SOA Suite installation : Default (Including JDK and DataBase configuration).
If you have any resolution to this strange problem please let me know. Thanks in advance.

I would be surprised if the amount of RAM in your machine is a limiting factor...
These blog posts contain useful info when running SOA Suite with resources on the low end of the spectrum. You could also use the [BPM AMI on Amazon EC2|http://www.deltalounge.net/wpress/2010/06/soa-suite-11gr1-ps2-notes-and-blogs/] ...
hth

Oracle Developer Suite 10g on Windows 7

Hi. Does anyone know if running Oracle Developer Suite 10g (10.1.2.0.2) on Windows 7 is supported?

This is a very common question in the Forum. Oracle Developer Suite (ODS) 10g R2 (with patchset 3: 10.1.3.0.2) is supported on Windows 7 32-bit. Last I checked, it was not supported on Windows 7 64-bit. Keep in mind, that this is just for the developer install of ODS. Version 10.1.2.0.2 is not supported, but it will work. Just follow the instructions installing on Windows Vista (search the forum - there are many posts on this topic as well).
The client application is supported on all versions of Windows (32 or 64 bit).
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Unable to install Oracle Developer Suite 10g on Windows 7

Hello,
I'm getting the following error message when using OUI on the Specify File Locations screen after providing source and destination:
Invalid staging area. There are no top level components for Windows NT, Windows 2000 available for installation in this staging area.
Anyone else have this happen while trying to install? I see that a few people have been successful in getting it installed. The destination was provided by default as C:\Program Files\Oracle\Inventory.
Any help would be appreciated - thanks in advance.

The Oracle Developer Suite (ODS) 10g is now certified by Oracle for installation on Windows 7 (32-bit). For installation steps, I recommend you take a look at My Oracle Support article: *How to Install Oracle Developer Suite 10g (10.1.2) on Windows 7 (32-bit) [ID 1292919.1]*. There is no need to run the XP-Mode (Virtual PC) of Windows 7 in order to install and use ODS on Windows 7.
Invalid staging area. There are no top level components for Windows NT, Windows 2000 available for installation in this staging area.This error could be caused by many things. I've seen two. The first (as I recall) was caused by an issue with one of the files in the Inventory directory. We were able to get around the issue by deleting a file (I'm sorry, but I don't recall which file or if we simply deleted the directory). I recommend you check with Oracle Support before you delete any files or the directory, however.
The other issue I've seen cause this is "spaces" in the directory path to the installer. This was the most common cause that I've seen. Make sure there are no spaces in the directory path where the installer is located.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

CONNECTING ORACLE 9I OR 10G DATABASE WITH ORACLE 10G FORMS AND REPORTS

pls tell how to connect oracle 9i or 10g database with oracle developer suite 10g . though the forms are getting connected but not running with error as
FRM-10142 the HTTP listner is not running on pls start the listner or check your runtime preferences.
now pls tell how to start listner and how to chage runtime preferences.
though i have worked with oracle 9i and forms 6i where we used to copy the tnsnames.ora from network/admin of oracle to forms 6i tnsnames.ora.
thank you, you may be thinking such a long question.....

sir
By server i mean the computer where oc4j and backend database are running is one one of the client pc not a dedicated server..., these database and 10g dev suite are installed in one of the client machine,
all the clients are using same internet explorer as browser.
no message is being displyed on some of the client machine where these forms are not being uploaded on browser instead it displays as done in status bar without actually showing anything at all...
sir so far as jinitiator or JRE is concered i have seen on the client machine (where my forms are running on internet explorer) a pop up is displyed telling one activex control is required to run this program and click to install it..
after clicking it download jinitiator from server and after installing jinitiator my forms are loaded and start functioning...
what i feel is as i said this machine where oc4j and database is running is one of the client machine so some other clients do not have acess to this machine, so this might be the reason why those clints are not able to run the said forms on the internet explorer.... can it be so... kindly tell..
thank you for your patience for reading the question

Using Oracle Developer Suite 10g Without the Oracle Database

I have never used Oracle, but have used MS SQL Server 7. I need to learn Forms. An Oracle salesperson suggested I download Oracle Developer Suite 10g (the demo product). It includes the Oracle Developer Suite (with Forms Developer), and many other programs.
The salesperson said it includes a database server, but I suspect it does not. I only downloaded the package last night, and have begun to skim the documentation, but I see nothing that looks like a database server.
In SQL Server 7, the database engine is run as a service and you create and manage your tables (do all the database admin stuff) using SQL Enterprise Manager.
So, does this package include a database engine/server? Or must you also have the Oracle Database?
I don't see a demo version of the Oracle Database - is there one?
Thanks in advance for any help.

Hi,
The Developer Suite does not contain a demo version of the Oracle Database.
You can download the database from this page:
http://otn.oracle.com/software/products/oracle9i/index.html
Vincent

Oracle Developer Suite 10g (10.1.2.0.2)

Hi,
with Oracle Developer Suite 10g (10.1.2.0.2) can we developpe for E_BUSINESS 11.5.10.2 (Oracle APPLICATIONS) with 9.2.0 DB?
Otherwise which (most last)version is compatible with E_BUSINESS 11.5.10.2 (Oracle APPLICATIONS).
Should we installe it on a user workstation (developper) ?
Many thanks

You are in the wrong forum. Please repost in one of the Applications/EBS forums.
cu
Andreas

Can't get the correct Oracle Developer Suite 10g disk 1

I tried to download Oracle Developer Suite 10g disk 1. After download completed, I check the size is only around 560mb, not 577mb. It is so wield. Then I followed the instruction and double-click the exe. I always got error it is not a win32 application.
I tried to use various way to download the disk1. I always got the same file and have the same problem.
About disk2, it is fine. I am just wondering if others have a chance to meet the same situation? Or oracle is putting an wrong file for our download.
Your warm hands will be appreciated.
Thanks...
-- ivy

This download has been up for some time so I don't think it is a problem with the file itself. We recommend a download manager for anybody having issues transferring large files.
OTN

Oracle Developer Suite 10g (10.1.2.0.2) And Webutil

Does Oracle Developer Suite 10g (10.1.2.0.2) already contains
preinstalled webutil or shall i have to install or configure it seperately (manually)?
If is there any version of Oracle Developer Suite which have already installed webutil, i mean there will be no need to install or configure webutil seperately.
Edited by: [email protected] on Sep 23, 2008 2:24 PM

Reading the webutil.cfg file, you have to unzip the files in the directory pointed by the install.syslib.location variable.
# 2. Installation Options
# WebUtil needs to download some files to the client in order to perform
# certain integration operations such as OLE or Registry Access. These files
# are downloaded the first time that you access one of the functions that need
# them. You have to define the location of these files on the server
# Details
# install syslib.location : The virtual path to the directory holding the
# webutil library files on the server side. This
# must either be an absolute URL or a URL that is
# relative to the documentbase
# install.syslib.<os>.<package>.<n> :
# The name(s) of the libraries required for
# particular webutil beans. The format of this is
# name|size|version|showDownloadDialog. Multiple
# libraries can be downloaded per package. But
# ensure that the <n> values are consecutive and
# start at 1
install.syslib.location=/webutil
# Change size and version if necessary, like when upgrading the library.
# Normally this would not be required since most of these libraries come with
# install itself.
## Correct 2nd value to correct file size to avoid raising an error
install.syslib.0.7.1=jacob.dll|94208|1.0|true
install.syslib.0.9.1=JNIsharedstubs.dll|65582|1.0|true
install.syslib.0.9.2=d2kwut60.dll|192512|1.0|true
## You can add your own custom libraries in here
#install.syslib.0.user.1=testwebutil.dll|204872|1.0|true
Francois

Download Oracle Developer Suite 10g (10.1.2.0.2) for Microsoft Windows

Hi
I unable to download Oracle Developer Suite 10g (10.1.2.0.2) for Microsoft Windows from the OTN website. The download starts from here: http://www.oracle.com/technology/software/products/ids/htdocs/101202winsoft.html
There are two files. The second file; ds_windows_x86_101202_disk2.zip downloads fine. The first file; ds_windows_x86_101202_disk1.zip stops at 46Mb with the message "connection reset by server".
When downloading using getright as suggested on the FAQ the connection has to resume at 46Mb. Using segmented downloading in getright I have been able to download 636.92MB of the 640MB file. The getright download window shows connected; waiting for reply but I am unable to get the last few Meg.
Any ideas how to complete the download? Has anyone else completed it successfully?
Thanks
Tom

I guess, it is a problem with your network.
Yesterday I have downloaded both the files and installed successfully. The first file took around 20 minutes and secod file took nearly 10 minutes to download.
Are you using office network? You can try downloading at home with DSL.

Oracle dveloper suit 10g r2 with db 11

Similar Messages

Maybe you are looking for