Oracle error: The listener could not find any available service handlers...?

I'm running Coldfusion 8 and Oracle XE 10, both on IIS 7.
Every so often, I get this message:
[Macromedia][Oracle JDBC Driver][Oracle]ORA-12519 The
listener could not find any available service handlers that are
appropriate for the client connection. One possible cause for this
error is that the server was not configured for the specified
server type (shared/dedicated).
I can restart the OracleServiceXE service and it works fine.
However, I have no clue what is causing this. I believe it all
began once I started using CFSCRIPTS and running queries using that
instead of CFML. Would anyone know what COULD cause this error to
happen and what I should look out for? I am new to Oracle and CF
btw.
Also, I can access it fine through the oracle homepage, but
when I attempt to connect to it from the coldfusion administrator,
it cannot establish a connection to that data source. It is only
after I restart the service that things go back to normal. Thanks.
Ryan

Hello,
Can you provide output of the following? Any other errors along with this error in alert.log file? Also your listener.ora and tnsnames.ora?
lsnrctl>set displaymode verbose 
lsnrctl>services your_listener_name 
lsnrctl>status
$> sqlplus '/as sysdba'
sql> select * from v$resource_limit;Regards
Edited by: OrionNet on Jan 14, 2009 10:17 PM
Edited by: OrionNet on Jan 14, 2009 10:22 PM

Similar Messages

  • CF error: The listener could not find any available service handlers...?

    I'm running Coldfusion 8 and Oracle XE 10, both on IIS 7. Every so often, I get this message:
    [Macromedia][Oracle JDBC Driver][Oracle]ORA-12519 The listener could not find any available service handlers that are appropriate for the client connection. One possible cause for this error is that the server was not configured for the specified server type (shared/dedicated).
    I can restart the OracleServiceXE service and it works fine. However, I have no clue what is causing this. I believe it all began once I started using CFSCRIPTS and running queries using that instead of CFML. I know this isn't a coldfusion forum, but would anyone know what COULD cause this error to happen and what I should look out for? I am new to Oracle and CF btw. Thanks.
    Ryan

    Hi rpeters83 and 396167,
    Did you find a solution for this?
    We have ColdFusion 7.0.2 connecting to an Oracle Database 10 R2 and we just got this error when executing a ColdFusion component.
    This is the first time we see this error and this CF/Oracle setup has been working fine for a long time.
    Thanks.

  • The system could not find any entries that are relevant to costing.

    plz give the solution ,its urgent
    Message no. CK060
    Diagnosis
    The system could not find any entries that are relevant to costing.
    System Response
    The system did not cost the object.
    Procedure
    Check whether the following objects should be flagged as relevant to costing:
    Items in the BOM
    Display BOM
    Operations in the routing
    Control key in the routing
    1. Look at the message log.
    2. Check whether a quantity was specified in the confirmation.

    hi,
    iam facing the problem while creating the
    stnadard cost estimate ck11n
    the system prompts the following message
    confirmation
    Logistics - General (LO)
    Information from the vendor to the recipient about the status of the purchase order.
    The term confirmation covers different types of information from the vendor to the customer, such as order, loading or transportation confirmation and the shipping notification.
    If materials planning takes place without a confirmation, planning can only be based on the delivery dates and quantities in the purchase order. In contrast, confirmations make it possible for the customer to plan the materials more precisely because between the purchase order and planned delivery date, more reliable information has become available.
    Logistics - General (LO)
    Communication sent by a vendor to a customer regarding the status of a purchase order.
    The term "confirmation" (short for "vendor confirmation") is an umbrella term for various types of information provided by a vendor to a customer, including order acknowledgments, loading or transport confirmations and shipping notifications.
    If the customer's materials planning and inventory control system does not work with confirmations, it can only refer to the delivery dates and quantities set out in the purchase order. The use of confirmations, on the other hand, makes the materials planning and inventory control process more precise, since between the PO date and the planned delivery date the customer receives increasingly reliable information about the pending arrival of ordered goods.
    Treasury Management (TR-TM)
    After concluding a financial transaction, a confirmation of the related contract data is sent to the relevant business partner. Confirmations can be printed or sent electronically directly from the R/3 System. Confirmation forms are defined via the correspondence type.
    Logistics - General (LO)
    Part of order monitoring, this documents the processing status of operations or sub-operations. In the SAP System, a distinction is made between partial and final confirmations.
    A final confirmation is used to determine
    at which work center the operation should be carried out
    who has carried out the operation
    the quantities of yield and scrap quantities that have been produced
    the size of the standard values required for the actual operation
    Materials Management (MM)
    Communication from a vendor to a customer providing information on the status of a purchase order.
    As used in this sense, the term "confirmation" can cover a number of different documents, such as order acknowledgment, loading confirmation, or shipping notification. Also termed "order acceptance/fulfillment confirmation".
    If the materials planning and control system operates without such confirmations, it can only work on the basis of the delivery dates and quantities in the purchase order. Confirmations, on the other hand, enable the customer to plan more exactly. In the period between the issue of the PO and the planned delivery date he is provided with more up-to-date and increasingly reliable information on the expected delivery.
    Project System (PS)
    A confirmation is a part of network control. It documents the state of processing for network activities and activity elements. There are two types of confirmations in the R/3 System: partial and final confirmations.
    A confirmation is used to record:
    the work center where the activity was carried out
    the person who carried out the activity
    the yield and scrap produced in an activity
    the actual values for the standard times
    Intellectual Property Management (CRM-IM-IPM)
    A report made by the licensee and defined in the rights sale contract on sales volumes or other quantities (such as audience figures for a film) during a period.
    Receiving (ECO-BBP-REC)
    An electronic document that combines the functions of goods receipts and service entry sheets. By creating a confirmation:
    Vendors can confirm that they have fulfilled their orders
    Employees can confirm the goods and services they ordered via their shopping baskets
    Central goods recipients can confirm the goods and services ordered by employees for whom they are responsibleconfirmation
    Logistics - General (LO)
    Information from the vendor to the recipient about the status of the purchase order.
    The term confirmation covers different types of information from the vendor to the customer, such as order, loading or transportation confirmation and the shipping notification.
    If materials planning takes place without a confirmation, planning can only be based on the delivery dates and quantities in the purchase order. In contrast, confirmations make it possible for the customer to plan the materials more precisely because between the purchase order and planned delivery date, more reliable information has become available.
    Logistics - General (LO)
    Communication sent by a vendor to a customer regarding the status of a purchase order.
    The term "confirmation" (short for "vendor confirmation") is an umbrella term for various types of information provided by a vendor to a customer, including order acknowledgments, loading or transport confirmations and shipping notifications.
    If the customer's materials planning and inventory control system does not work with confirmations, it can only refer to the delivery dates and quantities set out in the purchase order. The use of confirmations, on the other hand, makes the materials planning and inventory control process more precise, since between the PO date and the planned delivery date the customer receives increasingly reliable information about the pending arrival of ordered goods.
    Treasury Management (TR-TM)
    After concluding a financial transaction, a confirmation of the related contract data is sent to the relevant business partner. Confirmations can be printed or sent electronically directly from the R/3 System. Confirmation forms are defined via the correspondence type.
    Logistics - General (LO)
    Part of order monitoring, this documents the processing status of operations or sub-operations. In the SAP System, a distinction is made between partial and final confirmations.
    A final confirmation is used to determine
    at which work center the operation should be carried out
    who has carried out the operation
    the quantities of yield and scrap quantities that have been produced
    the size of the standard values required for the actual operation
    Materials Management (MM)
    Communication from a vendor to a customer providing information on the status of a purchase order.
    As used in this sense, the term "confirmation" can cover a number of different documents, such as order acknowledgment, loading confirmation, or shipping notification. Also termed "order acceptance/fulfillment confirmation".
    If the materials planning and control system operates without such confirmations, it can only work on the basis of the delivery dates and quantities in the purchase order. Confirmations, on the other hand, enable the customer to plan more exactly. In the period between the issue of the PO and the planned delivery date he is provided with more up-to-date and increasingly reliable information on the expected delivery.
    Project System (PS)
    A confirmation is a part of network control. It documents the state of processing for network activities and activity elements. There are two types of confirmations in the R/3 System: partial and final confirmations.
    A confirmation is used to record:
    the work center where the activity was carried out
    the person who carried out the activity
    the yield and scrap produced in an activity
    the actual values for the standard times
    Intellectual Property Management (CRM-IM-IPM)
    A report made by the licensee and defined in the rights sale contract on sales volumes or other quantities (such as audience figures for a film) during a period.
    Receiving (ECO-BBP-REC)
    An electronic document that combines the functions of goods receipts and service entry sheets. By creating a confirmation:
    Vendors can confirm that they have fulfilled their orders
    Employees can confirm the goods and services they ordered via their shopping baskets
    Central goods recipients can confirm the goods and services ordered by employees for whom they are responsible

  • Error "Premiere Pro could not find any capable video play modules" on Mac Book Pro with Intel Iris Pro 1536 MB Graphics

    Hola: Después de haber estado leyendo bastante acerca del error
    Adobe Premiere Pro no pudo encontrar ningún módulo capaz de reproducir vídeo. Actualice los controladores de visualización de vídeo y vuelva a empezar.
    No he encontrado ayuda sobre cómo solucionar este problema en un ordenador Mac Book Pro dotado de tarjeta gráfica Intel Iris Pro 1536 MB.
    ¿Podría alguien ayudarme a solucionarlo?
    Muchas gracias.
    Hello: After having reading a lot about this error:
    Premiere Pro could not find any capable video play modules
    I haven't found any help about how to solve this problem on a Mac Book Pro computer with an Intel Iris Pro 1536 MB graphic card.
    Can anybody help me to solve it?
    Thank you very much.

    Dual video problems - Do you have dual graphics adapters?
    IF YES, read below
    -http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
    -http://forums.adobe.com/thread/1001579
    -Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
    -link to why http://forums.adobe.com/message/4685328
    -http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2
    -Mac Utility for dual adapters http://forums.adobe.com/thread/1017891?tstart=0

  • Could not find any available Global Catalog in forest when running RemoteMailbox cmdlet

    My current Exchange environment is a hybrid configuration of Office 365, Exchange 2013 hybrid, and Exchange 2007 on-premise.
    I have a script responsible for enabling remote mailboxes and assigning O365 licenses to a list of users; essentially provisioning users an O365 mailbox. This script runs every hour through a defined scheduled task in the Task Scheduler.
    The script is proven to work but will intermittently throw an error on some days: "Could not find any available Global Catalog in forest root.xyz.com"
    Here are the nuances of the error when it does occur:
    It will only throw the error when the script is run via scheduled task - the script will work fine if executed from the command line
    The error occurs when "Enable-RemoteMailbox" or "Get-RemoteMailbox" is called.
    The same error will occur with ANY script that calls "Enable-RemoteMailbox" or "Get-RemoteMailbox" and is ran via scheduled task - even when the RemoteMailbox cmdlet was the only line in the script
    Here is the output and error when Get-RemoteMailbox -verbose is ran:
    VERBOSE: [15:49:52.474 GMT] Get-RemoteMailbox : Active Directory session
    settings for 'Get-RemoteMailbox' are: View Entire Forest: 'True',
    VERBOSE: [15:49:52.489 GMT] 
    Get-RemoteMailbox : Runspace context: Executing
    user: , 
    Executing user organization: , 
    Current organization: , 
    RBAC-enabled:Disabled.
    VERBOSE: [15:49:52.489 GMT] Get-RemoteMailbox : Beginning processing
    VERBOSE: [15:49:52.521 GMT] Get-RemoteMailbox : Current ScopeSet is: {
    Recipient Read Scope: {{, }}, 
    Recipient Write Scopes: {{, }}, Configuration Read Scope: {{, }}, 
    Configuration Write Scope(s): {{, }, }, 
    Exclusive Recipient Scope(s): {}, 
    Exclusive Configuration Scope(s): {} }
    VERBOSE: [15:49:52.521 GMT] Get-RemoteMailbox : Resolved current organization: .
    VERBOSE: [15:49:52.521 GMT] Get-RemoteMailbox : Searching objects "abose" of type "ADUser" under the root "$null".
    VERBOSE: [15:49:52.536 GMT] Get-RemoteMailbox : Previous operation run on global catalog server 'evw-xyzdc-p02.ad.xyz.com'.
    Get-RemoteMailbox : Could not find any available Global Catalog in forest root.xyz.com.
    At C:\IDM_In\Scripts\MinimalTest.ps1:42 char:14
    + $abose = Get-RemoteMailbox 'abose' -verbose
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : NotSpecified: (:) [Get-RemoteMailbox], ADTransientException
    + FullyQualifiedErrorId : E421EF0B,Microsoft.Exchange.Management.RecipientTasks.GetRemoteMailbox
    VERBOSE: [15:49:52.567 GMT] Get-RemoteMailbox : Ending processing
    What could be the cause of this intermittent error?
    Thanks for any help

    looks to me permission error as when you are running it via a schedule task is is not able to call exchange shell/ commands {confirm this} where as when you running this manually looks to me you open exchange shell, may be as admin also and then running
    the script.
    schedule task process is not able to get the permission..
    MARK AS USEFUL/ANSWER IF IT DID
    Thanks
    Happiness Always
    Jatin

  • Unhandled Exception "Could not find any available Domain Controller"

    Hi,
    I keep on having exchange 2010 loosing contact to domain controllers.
    "Unhandled Exception "Could not find any available Domain Controller.". EventID 1. Once I restart the sever, this error disappear and reappear again after a few days.
    When I run AD setting, the result shows as below. Update version is currently as at 14.02.0342.003. And boths DCs have 100% uptime.
    PS C:\> Get-ADServerSettings | fl
    RunspaceId                                
    : 9392eb25-bcdc-462e-816b-2d5626c572a5
    DefaultGlobalCatalog                      
    : DC2.com.au
    PreferredDomainControllerForDomain        
    DefaultConfigurationDomainController      
    : dc1.com.au
    DefaultPreferredDomainControllers         
    : {DC2.com.au}
    UserPreferredGlobalCatalog                
    UserPreferredConfigurationDomainController :
    UserPreferredDomainControllers            
    RecipientViewRoot                         
    ViewEntireForest                          
    : True
    WriteOriginatingChangeTimestamp           
    : False
    WriteShadowProperties                     
    : False
    Identity                                  
    IsValid                                   
    : True
    Could you please help as this exchange server has our management team and their outlook keep on going offline.
    Thanking you in advance.
    Cheers,
    Pwint

    I have another issue. I was trouble shooting exchange bin folder for permission and as a result of it Exchange transport service stopped and couldn't restart. I quickly changed to local service account and able to restart. Fixed the transport roles folder
    permission but don't know the password of network service account so I can't change it back. I can send and receive emails internally and externally but I am worried that by running with local account maybe not recommended? Is it safe to reset network service
    password? Thanks. I am freaking out... Regards, Pwint

  • Unable to execute Test-Mailflow cmdlet. Could not find any available Domain Controller

    I started receiving this error in SCOM while testing Exchange 2007 Mail flow. Normally the tests work just fine, and when I execute"test-mailflow" on the offending server, it works just fine. The alert doesn't have enough details to find out what
    is wrong. Can anyone help out?
    Alert Description:
    Unable to execute Test-Mailflow cmdlet. Could not find any available Domain Controller
    Environment: SCOM 2012 R2 UR4
    MP: Exchange 2007 MP, latest update
    Monitor: Exchange 2007 Test Local Mail Flow Monitor
    Brody Kilpatrick

    Hi,
    After you execute"test-mailflow" on the offending server, please also look into event logs to check is there any errors or warnings. SCOM is a tool to collect information, from my point of view, this message is collected from Exchange server, so
    you may need to check event viewer.
    In addition, please also make sure your Exchange environment is under monitored. And have you followed the Exchange 2007 MP guide to configure the MP?
    Make sure the Client Access Server is under monitored, you may check the Application Event log on the Client Access Server, and make sure there are no errors or warnings indicating a problem with the Client Access Server.
    Regards,
    Yan Li
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Handle Nulll values , if the we could not find any records in table

    Hi All,
    I am facing one issue..
    I have two tables one dimension table and one is fact table.
    For some of the records only dimensions are available and no fact details.So I want to display the dimension details even the facts are not available.
    The issue is when there is no facts available for particular records, the fact column values are showing null values.
    I have below similar formula for the fields,but this is working fine(replacing null value with zero) only in case of the record is exists in fact table and null value for this field.
    ((CASE  WHEN  "PAA".""."PAA"."FACT_PROJ_EMEA_A"."TOTAL_REV"  IS NULL THEN 0 ELSE   "PAA".""."PAA"."FACT_PROJ_EMEA_A"."TOTAL_REV"
    END)/ "PAA".""."PAA"."FACT_EXCHANGE_RATE_A"."EXCHANGE_RATE" )/1000
    But if there are no record at all in the table then I am getting the null value for this field, so in this case also I need to replace with zero and also I need to implement this functionality in rpd level not in the analytics.
    Could you please let me know, what is the solution for this case.
    Please let me know if you need any further information.
    Regards,
    Amarnath

    Try to insert a record in dim table with row_wid=0 this record 0 for number type and Unspecified for string type columns
    in rpd use ifnull(col,0)
    ~ http://cool-bi.com

  • Intel HD Graphics 4000 - Error "Premiere Pro could not find any capable video play modules"

    Hi
    I'm getting this error message while starting Premiere Pro (Macbook Pro - Intel HD Graphics 4000).
    Updating the softwares/drivers has not fixed the issue.
    Can anyone help ?
    Thank you for your support !

    Hi,
    Try this:
    Go to the following locations:
    Location 1: When in Finder, click on Go > Go to Folder > ~/Library/Application Support/Adobe
    Location 2: Go > Go to Folder > ~/Library/Preferences/Adobe
    Location 3: Documents > Adobe
    In all the locations, rename the 'Adobe' folders to 'OldAdobe'
    Launch Premiere, accept the License Agreement and see if it works.
    Note: You will lose your customized workspaces and keyboard shortcuts.
    Thanks,
    Rameez

  • Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again.

    I have administrator rights to the computer. The drivers are up to date. But I am still getting the error message "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again"  when opening Premier Pro CS5.5. This appears to have happed after I upgraded to Mac OS 10.10.2.
    Anyone?
    Thanks

    Hi Stan.
    I had the same problem as you did though I am using Adobe CC.  I saw nobody replied to you so perhaps my eventual success on my later version may have applications to the error on your version. 
    Anyhow, I did all the suggestions found here (Error "Premiere Pro could not find any capable video play modules" | Startup )  first and updated my NVidea card to no avail.  Eventually what did the trick was this...
    After mucking about with the video card, I said "OK lets just have a go at Premiere itself." So I uninstalled Premiere CC and reinstalled it.  Now for some reason it didn't give me the latest patch but a slightly earlier version than the current one but lo and behold it was fine with the video card again.  I was able to get my friend's video imported and quickly edited but then was having some issues with exporting where it would hang up but I went into Adobe Media Encoder and exported it there without a care.  That task out of the way, I then went and made the update to the latest patch and it works perfectly fine - no video driver issues.
    So short of it is this - if you've updated your drivers, perhaps what you could try uninstalling and reinstalling Premiere.
    Let me know if this works.
    Cheers and good luck

  • Premiere Pro could not find any capable video...

    And yes:
    I tried everything what was suggested at this Page:
    Error "Premiere Pro could not find any capable video play modules" | Startup
    So...
    Yesterday everything was fine, today nothing works...
    I can't start Premiere Pro CC, After Effect CC and the Media Encoder CC as well Audition CC starts after feeling hours of time...
    Can anybody help me?
    System Information:
    OS: Win 7 64-bit Pro
    CPU: Intel Core i7-4790K Box, LGA1150
    Mainboard: ASRock Fatal1ty Z87 Killer, Sockel 1150, ATX
    GPU: ASUS GTX770-DC2OC-2GD5 DirectCU II OC, GeForce GTX 770, 2GB GDDR6
    SSD: Samsung SSD 840 Pro 128GB
    HDD: WD Black 1TB

    Hi ml-learningby,
    Have you tried updating your GPU drivers?
    Thanks,
    Kevin

  • "Adobe Premier Pro could not find any capable video play modules. Please update your video display drivers." What does this mean? Need help urgently!

    Premier Pro CC will not open, even though all my computer software is updated. It comes up with the message every time I try and open it. "Adobe Premier Pro could not find any capable video play modules. Please update your video display drivers and start again." What does this mean? I have been searching the internet for an answer for hours. Urgent help needed.

    Error "Premiere Pro could not find any capable video play modules" | Startup 

  • Adobe Premier could not find any capable video play modules.

    My system is:
    Processor: Intel® Core™ i7-4700MQ CPU @ 2.4GHz 2.4 GHz
    Installed memory (RAM): 16.0GB
    System Type: 64-bit Operating System, x64-based processor
    I have the latest drivers for my NVIDIA video card (GeForce 340.43)
    Premier Pro CC was working fine yesterday but today is giving me the message "Adobe Premier could not find any capable video play modules".
    I have tried to find a number or 'chat' option to talk to someone from Adobe about this but I keep getting directed to this page. 
    Help would be greatly appreciated.
    PS - apologies if this question has already been asked.  I couldn't find a recent answer.

    Error "Premiere Pro could not find any capable video play modules" | Startup 

  • Could not find any capable video play modules upon startup.

    After installing Premier Pro CC, I received this error message (also pictured below): "ADOBE PREMIER PRO STARTUP ERROR. Adobe Premier Pro could not find any capable video play modules. Please update your video display drivers and start again."
    And here is an Adobe help page that offers four solutions to this issues, Error "Premiere Pro could not find any capable video play modules" | Startup. But I'll be honest, I feel like I need my hand held through solutions 2-4. I know nothing about video adapter drives, AMD Radeon cards or BIOS setup.
    Could someone here expand upon these solutions for me? It would be much appreciated.
    FWIW, I'm on a MacBook Pro, OS X 10.9.4, 2.6 GHz Intel Core i5 processor, 8 GB 1600 MHz DDR3 memory, and Intel Iris graphics.
    Thanks
    Harry

    So according to Apple, Premiere Pro simply cannot run on my laptop. It does not have and never will have a "Adobe-certified GPU card for GPU-accelerated performance".
    Adobe, is this true?

  • My soundbooth not function withe error code NV_OGL. the stament: "soundbooth could not find any capable playback modules". but pc system is working. Any one can help me?

    Hi, I am SK Chew,My soundbooth is not function after few months not used and with an error code "NV_OGL" and the statement is "soundbooth could not find any capable playback modules". and my pc is working in good condition. any one can help me?

    Quicktime errors http://forums.adobe.com/message/4545437 may help
    Or, not exactly the same, but MAY be related
    ExporterQuickTimeHost QT Version http://forums.adobe.com/thread/1109614

Maybe you are looking for