Oracle -Essbase - Integration Server Control

I am using Essbase version 9.3.1 and want to create OLAP model with the Integration Services Console. I would be very grateful if you could help me to model the following secnario:
I have a fact table with two columns (say ManagerId & EmployeeId) referenced to the same dimension table (say Employee table). How do I model this to create an OLAP model in Integration Service Console please?
I could create a separate User Defined Table (copy of Employee table) and join fact table's ManagerID to this new table. But I am not sure how this would affect to the performance of the cube.
Thank you in advance.

Hi Scot
Thank you very much for the answer. I am new to Essbase and my experience on OLAP comes from MS SSAS. I could model this scenario in SSAS without any problem. In SSAS I could create a different dimension based on an existing dimension. I would model above scenario by dragging the table second time (and give a different name) and join to fact table's second column. Let's see whether this would work. Once again thank you very much for your help & suggestion. Mean time if you have a better suggestion please do tell me.
Thank you.
Regards
Chandra

Similar Messages

  • Configuration issue : Oracle Essbase Studio Server

    Hi,
    What going wrong here? Please advice...
    C:\Hyperion\products\Essbase\EssbaseStudio\Server\server_prod.log
    20:44:06 05/13/10 INFO Starting up
    20:44:06 05/13/10 INFO Oracle Essbase Studio Server. Version 11.1.1.3.00, Build 090, June 25 2009
    20:44:14 05/13/10 (system) WARNING Failed to load driver for sap
    20:44:14 05/13/10 (system) SEVERE Cannot load Teradata connector
    20:44:14 05/13/10 (system) WARNING Failed to load driver for teradata
    20:44:14 05/13/10 (system) WARNING Failed to load driver for mysql
    20:44:14 05/13/10 (system) WARNING Failed to load driver for netezza
    20:44:15 05/13/10 (system) SEVERE Cannot initialize catalog storage. Make sure that server.properties has correct information
    -------------- Exception --------------
    com.hyperion.cp.catalog.exceptions.CatalogInitializationException: catalog.CatalogInitializationException.StorageInitializationFailure
         at com.hyperion.cp.catalog.storage.StorageFactory.getStorageInstance(StorageFactory.java:155)
         at com.hyperion.cp.catalog.transaction.TransactionManager.initialize(TransactionManager.java:64)
         at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:98)
         at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:156)
         at com.hyperion.cp.catalog.Catalog.<init>(Catalog.java:85)
         at com.hyperion.cp.catalog.Catalog.<clinit>(Catalog.java:73)
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Class.java:164)
         at com.hyperion.cp.catalog.CatalogInitializer.run(CatalogInitializer.java:54)
         at com.hyperion.cp.server.RequestListener$SystemTask.run(RequestListener.java:1302)
         at com.hyperion.cp.server.RequestListener.runSystemTask(RequestListener.java:167)
         at com.hyperion.cp.server.RequestListener.<init>(RequestListener.java:129)
         at com.hyperion.cp.server.ServerMain.main(ServerMain.java:204)
    Caused by: java.lang.reflect.InvocationTargetException
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
         at com.hyperion.cp.catalog.storage.StorageFactory.getStorageInstance(StorageFactory.java:149)
         ... 12 more
    Caused by: com.hyperion.cp.catalog.exceptions.CatalogInitializationException: No table ORCL.ADVWORKS.CP_NONE_TRANSACTIONS found
         at com.hyperion.cp.catalog.storage.StorageEngine.validateSignature(StorageEngine.java:193)
         at com.hyperion.cp.catalog.storage.StorageEngine.<init>(StorageEngine.java:87)
         at com.hyperion.cp.catalog.storage.SQLStorageEngine.<init>(SQLStorageEngine.java:20)
         ... 17 more

    Hi
    Thanks,
    I able to connect after changing the catelog username which point to wrong one in server.properties.
    But now Essbase Server got failed. Can you help
    Essbase Server startup check using Maxl command
    Error: Result: Unable to connect Essbase Server using MAXL command. Please check that essbase server is running.
    Recommended Action: Check Essbase Server is started.
    EssabaseServerChecker
    Error: Cannot connect to olap service. Cannot connect to Essbase Server. Error:Essbase Error(1051293): Login fails due to invalid login credentials
    Recommended Action: Check application is started.
    Launch external checker with next command: C:\Hyperion\common\validation\9.5.0.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect admin ****** d26085.arrownao.corp.arrow.com http://d26085.arrownao.corp.arrow.com:13080/aps/JAPI
    Error: Result: -1; Error message: Cannot connect to olap service. Cannot connect to Essbase Server. Error:Essbase Error(1051293): Login fails due to invalid login credentials
    Recommended Action: Make sure external checker is working.
    Launch external checker with next command: C:\Hyperion\common\validation\9.5.0.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect admin ****** d26085.arrownao.corp.arrow.com http://d26085.arrownao.corp.arrow.com:13080/aps/JAPI
    Error: Result: -1; Error message: Cannot connect to olap service. Cannot connect to Essbase Server. Error:Essbase Error(1051293): Login fails due to invalid login credentials
    Recommended Action: Make sure external checker is working.

  • Insufficient access rights registering Oracle Directory Integration Server

    Hi all!
    following steps I´ve done to use the Oracle Directory Integration Server.(I´ve installed Oracle 10g infrastructure - OID is running - I´m also able to apply successful with ODM and orcladmin account)
    - oidctl connect=mydb1 server=odisrv instance=1 stop
    - odisrvreg -h localhost -p 389 -D cn=orcladmin,cn=Users,dc=localhost;dc=com -w ,pass
    where pass is the password of orcladmin.
    -> now I get the following error:
    registering..
    Error javax.naming.NoPermissionException [LDAP:error code 50: Insufficient Access Rights]; remaining name 'cn=odisrv+orclhostname=maschine,cn=odi,cn=oracle internet directory' !
    Any idea ??
    Thanks for all help & comments.

    I have gone through the documentation for creating the script. But there is one thing which I am not able to understand i.e. Subscription Parameters.
    Can anyone tell me the use of subscription parameters? What is the role of subscription parameters in Oracle Lite and External Authentication.
    Regards
    Kapil

  • Enabling Drill Through causing Essbase Integration Server hang.

    During the automation process using olapicmd command and *.cbs we are enabling Drill Through which is causing Essbase Integration Server hang.
    We don't get any error message in log file. Plus sometime its run successful , also when we run this manually going to EIS console, it run fine.
    Thanks in advance
    -Piyush

    Hi Kishore,
    Thanks for your prompt reply......
    I have checked in before itself the Drill down option ......
    I am not able to understand whats the issue we are able to drill through in EIS till last level but after improting in OBIEE we are not able to drill through to last level, in the last level it showing no results....
    I am not able to find the solution any other suggestions ?
    Regards,
    Tarang Jain

  • Set environment variable in oracle 10g application server control rel3

    hi all,
    i am trying to connect to emc centera through 10g rel3 , here i am getting error .
    error name is:
    com.filepool.fplibrary.FPLibraryException: Error loading FPLibrary or one of its dependencies
    at com.filepool.fplibrary.FPPool.<init>(Unknown Source)
    if any body knows please help me.
    Thanks and regards
    Pravin

    Hello,
    Take a look to http://buttso.blogspot.com/2006/08/accessing-environment-variables-from.html
    Regards
    Tugdual Grall

  • Cannot access web integration server admin page

    Hi guys,
    1)After Installing 9iAS and setting up all the configurations needed to run the sample test page .jsp file from the web integration server i get the following error....YOU ARE NOT AUTHORIZED TO VIEW THIS PAGE.
    2)What value to set for HTTP & HTTPS proxy under the URL-http://host_name.domain:5555 ?
    3)I tried to change the port number of the HTTP LISTENER from inside the http://host_name.domain:5555 pressed OK.Now how to find the port number of he web integration server(previously it was http://host_name.domain:5555 but now the port number is changed without which i cannot login to the admin page of that server.)
    Gimme a solution to these probs
    Thanx in advance,

    I am trying to access our Production Enterprise Manager for the 10g AS.
    When I try to access it I am getting an error:
    An error has occurred!
    IOException in sending Request :: Connection refused: connect
    So from the command line I check:
    emctl status iasconsole and it says that
    EM Daemon is not running.
    So then I type: emctl start iasconsole and it says:
    An instance of Oracle 10g Application Server control is already running
    Do you wish to shut down first?
    If I say no, the startup is aborted. If I say yes then:
    The OracleOracle10gASProdASControl service is not started?
    What the heck does that mean? The status shows the Daemon is not started, but when I try to start it, it says it is already running? Can anyone help?
    Thank you,
    Jeff

  • ESSBase studio server is not running

    Dear All,
    When I run ESSBase studio server, I get below error. Kindly advice me on this.
    C:\Hyperion\products\Essbase\EssbaseStudio\Server>call ""C:\Hyperion\common\config\9.5.0.0"\setJavaRuntime.bat"
    Log file location is:
    C:\Hyperion\logs\esbstudio\server.log
    18:49:34 12/29/09 INFO Starting up
    18:49:34 12/29/09 INFO Oracle Essbase Studio Server. Version 11.1.1.3.00, Build 090, June 25 2009
    18:50:41 12/29/09 (system) WARNING Failed to load driver for sap
    18:50:41 12/29/09 (system) SEVERE Cannot load Teradata connector
    18:50:41 12/29/09 (system) WARNING Failed to load driver for teradata
    18:50:41 12/29/09 (system) WARNING Failed to load driver for mysql
    18:50:41 12/29/09 (system) WARNING Failed to load driver for netezza
    18:50:41 12/29/09 (system) SEVERE Cannot initialize catalog storage. Make sure that server.properties has correct information
    -------------- Exception --------------
    com.hyperion.cp.catalog.exceptions.CatalogInitializationException: Cannot initialize data storage engine
    at com.hyperion.cp.catalog.storage.StorageFactory.initialize(StorageFactory.java:53)
    at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:97)
    at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:156)
    at com.hyperion.cp.catalog.Catalog.<init>(Catalog.java:85)
    at com.hyperion.cp.catalog.Catalog.<clinit>(Catalog.java:73)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:164)
    at com.hyperion.cp.catalog.CatalogInitializer.run(CatalogInitializer.java:54)
    at com.hyperion.cp.server.RequestListener$SystemTask.run(RequestListener.java:1302)
    at com.hyperion.cp.server.RequestListener.runSystemTask(RequestListener.java:167)
    at com.hyperion.cp.server.RequestListener.<init>(RequestListener.java:129)
    at com.hyperion.cp.server.ServerMain.main(ServerMain.java:204)
    Caused by: com.hyperion.cp.datasources.exploration.sql.SqlExplorerException: Sql exploration exception
    at com.hyperion.cp.datasources.exploration.sql.SqlExplorer.performExploration(SqlExplorer.java:237)
    at com.hyperion.cp.datasources.exploration.sql.SqlExplorer.explore(SqlExplorer.java:143)
    at com.hyperion.cp.catalog.storage.StorageFactory.initialize(StorageFactory.java:49)
    ... 11 more
    Caused by: com.hyperion.cp.driver.util.DriverException: Data Driver for url '%s' is absent or failed to initialize. Please see server start
    p log for more information.
    at com.hyperion.cp.driver.ConnectionManager.getConnection(ConnectionManager.java:102)
    at com.hyperion.cp.driver.DriverEngine.getConnection(DriverEngine.java:60)
    at com.hyperion.cp.driver.DriverEngine.executeStringQuery(DriverEngine.java:131)
    at com.hyperion.cp.datasources.exploration.Explorer.executeStringQuery(Explorer.java:138)
    at com.hyperion.cp.datasources.exploration.sql.SqlExplorer.getCatalogs(SqlExplorer.java:456)
    at com.hyperion.cp.datasources.exploration.sql.SqlExplorer.exploreSources(SqlExplorer.java:261)
    at com.hyperion.cp.datasources.exploration.sql.SqlExplorer.performExploration(SqlExplorer.java:195)
    ... 13 more
    Thanks in advance,
    Best,
    Veeranna Ronad.

    Hi,
    The content of the server.properties is given below. Even after making suggested changes, the server is not running.
    I am running the server from the path "C:\Hyperion\products\Essbase\EssbaseStudio\Server\stopServer.bat".
    server.properties
    catalog.autoinit=true
    catalog.username=prototype_int
    transport.port=5300
    catalog.url=oracle\://10.1.126.248\:1521/ORCL
    catalog.password=T1JBQ0xF
    catalog.db=prototype_int
    server.hss.bpmApplication=BPM\:73317
    Below is the error.
    C:\Hyperion\products\Essbase\EssbaseStudio\Server>call ""C:\Hyperion\common\config\9.5.0.0"\setJavaRuntime.bat"
    Log file location is:
    C:\Hyperion\logs\esbstudio\server.log
    17:56:32 01/15/10 INFO Starting up
    17:56:32 01/15/10 INFO Oracle Essbase Studio Server. Version 11.1.1.3.00, Build 090, June 25 2009
    javax.crypto.IllegalBlockSizeException: Input length must be multiple of 8 when decrypting with padded cipher
    at com.sun.crypto.provider.SunJCE_h.b(DashoA12275)
    at com.sun.crypto.provider.SunJCE_h.b(DashoA12275)
    at com.sun.crypto.provider.DESCipher.engineDoFinal(DashoA12275)
    at javax.crypto.Cipher.doFinal(DashoA12275)
    at com.hyperion.cis.config.persistent.utils.Encrypter.decrypt(Encrypter.java:103)
    at com.hyperion.cis.config.persistent.utils.Encrypter.decryptString(Encrypter.java:130)
    at com.hyperion.cp.util.PropertyManager.getProperty(PropertyManager.java:143)
    at com.hyperion.cp.catalog.storage.StorageFactory.initialize(StorageFactory.java:33)
    at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:97)
    at com.hyperion.cp.catalog.Catalog.<init>(Catalog.java:85)
    at com.hyperion.cp.catalog.Catalog.<clinit>(Catalog.java:73)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:164)
    at com.hyperion.cp.catalog.CatalogInitializer.run(CatalogInitializer.java:54)
    at com.hyperion.cp.server.RequestListener$SystemTask.run(RequestListener.java:1302)
    at com.hyperion.cp.server.RequestListener.runSystemTask(RequestListener.java:167)
    at com.hyperion.cp.server.RequestListener.<init>(RequestListener.java:129)
    at com.hyperion.cp.server.ServerMain.main(ServerMain.java:204)
    17:56:38 01/15/10 (system) WARNING Failed to load driver for sap
    17:56:39 01/15/10 (system) WARNING Failed to load driver for mysql
    17:56:39 01/15/10 (system) WARNING Failed to load driver for netezza
    17:56:40 01/15/10 (system) SEVERE Cannot establish connection to Oracle server
    javax.crypto.IllegalBlockSizeException: Input length must be multiple of 8 when decrypting with padded cipher
    at com.sun.crypto.provider.SunJCE_h.b(DashoA12275)
    at com.sun.crypto.provider.SunJCE_h.b(DashoA12275)
    at com.sun.crypto.provider.DESCipher.engineDoFinal(DashoA12275)
    at javax.crypto.Cipher.doFinal(DashoA12275)
    at com.hyperion.cis.config.persistent.utils.Encrypter.decrypt(Encrypter.java:103)
    at com.hyperion.cis.config.persistent.utils.Encrypter.decryptString(Encrypter.java:130)
    at com.hyperion.cp.util.PropertyManager.getProperty(PropertyManager.java:143)
    at com.hyperion.cp.catalog.storage.StorageFactory.initialize(StorageFactory.java:33)
    at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:97)
    at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:156)
    at com.hyperion.cp.catalog.Catalog.<init>(Catalog.java:85)
    at com.hyperion.cp.catalog.Catalog.<clinit>(Catalog.java:73)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:164)
    at com.hyperion.cp.catalog.CatalogInitializer.run(CatalogInitializer.java:54)
    at com.hyperion.cp.server.RequestListener$SystemTask.run(RequestListener.java:1302)
    at com.hyperion.cp.server.RequestListener.runSystemTask(RequestListener.java:167)
    at com.hyperion.cp.server.RequestListener.<init>(RequestListener.java:129)
    at com.hyperion.cp.server.ServerMain.main(ServerMain.java:204)
    17:56:40 01/15/10 (system) SEVERE Cannot establish connection to Oracle server
    17:56:40 01/15/10 (system) SEVERE Cannot initialize catalog storage. Make sure that server.properties has correct information
    -------------- Exception --------------
    com.hyperion.cp.catalog.exceptions.CatalogInitializationException: catalog.CatalogInitializationException.StorageInitializationFailure
    at com.hyperion.cp.catalog.storage.StorageFactory.getStorageInstance(StorageFactory.java:155)
    at com.hyperion.cp.catalog.transaction.TransactionManager.initialize(TransactionManager.java:64)
    at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:98)
    at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:156)
    at com.hyperion.cp.catalog.Catalog.<init>(Catalog.java:85)
    at com.hyperion.cp.catalog.Catalog.<clinit>(Catalog.java:73)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:164)
    at com.hyperion.cp.catalog.CatalogInitializer.run(CatalogInitializer.java:54)
    at com.hyperion.cp.server.RequestListener$SystemTask.run(RequestListener.java:1302)
    at com.hyperion.cp.server.RequestListener.runSystemTask(RequestListener.java:167)
    at com.hyperion.cp.server.RequestListener.<init>(RequestListener.java:129)
    at com.hyperion.cp.server.ServerMain.main(ServerMain.java:204)
    Caused by: java.lang.reflect.InvocationTargetException
    at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
    at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
    at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
    at com.hyperion.cp.catalog.storage.StorageFactory.getStorageInstance(StorageFactory.java:149)
    ... 12 more
    Caused by: com.hyperion.cp.catalog.exceptions.CatalogInitializationException: No table PROTOTYPE_INT.CP_NONE_TRANSACTIONS found
    at com.hyperion.cp.catalog.storage.StorageEngine.validateSignature(StorageEngine.java:193)
    at com.hyperion.cp.catalog.storage.StorageEngine.<init>(StorageEngine.java:87)
    at com.hyperion.cp.catalog.storage.SQLStorageEngine.<init>(SQLStorageEngine.java:20)
    ... 17 more
    Thanks in advance,
    Best,
    Veeranna Ronad.
    Edited by: Ronad on Jan 15, 2010 4:02 PM
    Edited by: Ronad on Jan 15, 2010 5:58 PM

  • Unable to start Essbase Studio Server

    Hi All,
    Am getting an error message when I start Essbase studio. The installation and configuration went without any errors. I have downloaded the jdbc driver for mysql, renamed it and placed it in the correct location. Yet when I start the studio server I get the error message described below. I have also attached the contents of the server.properties. Do let me know if you guys have any suggestions.
    server.properties:
    #Wed Mar 03 15:17:26 EST 2010
    catalog.autoinit=true
    catalog.username=essuser_qa
    catalog.url=sqlserver\://NYSQLSVR\:1433
    catalog.password=rfBjPy3lHIDM8QeIikYgIg\=\=
    catalog.db=essbase_qa.dbo
    error message:
    15:32:21 03/03/10 INFO Starting up
    15:32:21 03/03/10 INFO Oracle Essbase Studio Server. Version 11.1.1.3.00, Build 090, June 25 2009
    15:32:27 03/03/10 (system) WARNING Failed to load driver for sap
    15:32:27 03/03/10 (system) SEVERE Cannot load Teradata connector
    15:32:27 03/03/10 (system) WARNING Failed to load driver for teradata
    15:32:27 03/03/10 (system) WARNING Failed to load driver for netezza
    15:32:30 03/03/10 (system) SEVERE Cannot initialize catalog storage. Make sure that server.properties has correct information
    -------------- Exception --------------
    com.hyperion.cp.catalog.exceptions.CatalogInitializationException: catalog.CatalogInitializationException.StorageInitializationFailure
         at com.hyperion.cp.catalog.storage.StorageFactory.getStorageInstance(StorageFactory.java:155)
         at com.hyperion.cp.catalog.transaction.TransactionManager.initialize(TransactionManager.java:64)
         at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:98)
         at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:156)
         at com.hyperion.cp.catalog.Catalog.<init>(Catalog.java:85)
         at com.hyperion.cp.catalog.Catalog.<clinit>(Catalog.java:73)
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Unknown Source)
         at com.hyperion.cp.catalog.CatalogInitializer.run(CatalogInitializer.java:54)
         at com.hyperion.cp.server.RequestListener$SystemTask.run(RequestListener.java:1302)
         at com.hyperion.cp.server.RequestListener.runSystemTask(RequestListener.java:167)
         at com.hyperion.cp.server.RequestListener.<init>(RequestListener.java:129)
         at com.hyperion.cp.server.ServerMain.main(ServerMain.java:204)
    Caused by: java.lang.reflect.InvocationTargetException
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
         at java.lang.reflect.Constructor.newInstance(Unknown Source)
         at com.hyperion.cp.catalog.storage.StorageFactory.getStorageInstance(StorageFactory.java:149)
         ... 12 more
    Caused by: com.hyperion.cp.catalog.exceptions.CatalogInitializationException: No table ESSBASE_QA.DBO.CP_NONE_TRANSACTIONS found
         at com.hyperion.cp.catalog.storage.StorageEngine.validateSignature(StorageEngine.java:193)
         at com.hyperion.cp.catalog.storage.StorageEngine.<init>(StorageEngine.java:87)
         at com.hyperion.cp.catalog.storage.SQLStorageEngine.<init>(SQLStorageEngine.java:20)
         ... 17 more
    ----------------------------------------

    You could try :-
    1. Execute the script “catalog_schema_drop.sql” under $HYPERION_HOME\products\Essbase\EssbaseStudio\server\database\common\MSSQLServer to drop the existing Catalog tables
    2. Bring up the Microsoft SQL Server Management Studio and login as sa
    a.Expand the Databases node
    b.Expand the “epmesbStudio” under the Database node
    c.Expand the “Security” node
    d.Right click on “Schemas” under the database “epmesbStudio” to bring up the “Schema” dialog:
    e.From the Schema dialog, enter ”epmEsbStudio” for both Schema name and Schema owner, then click OK to create the schema.
    f. Verify that the schema “epmEsbStudio” is created:
    3. Expand the Users node under Security: (you should see the user “epmEsbStudio” listed under Users)
    a. Bring up the user Properties for “epmEsbStudio” by right click on “epmEsbStudio” then select Properties
    b. From the user Properties dialog, you can see the Default schema is dbo. Change the default schema to “epmEsbStudio”, which is the schema that we create in the above steps by click on the list button to bring up the Select Schema dialog:
    c. Click on the Brows button from the Select Schema dialog, and select “epmEsbStudio” from the list and click OK
    d.The selected schema should place in the Select Schema dialog. Click OK on the Select Schema dialog:
    e. Now the schema “epmEsbStudio” should appeared as Default schema on the user Properties dialog.
    f. Now make sure the Database role membership “db_owner” is selected (select this option if it is not already select).
    g. Click OK to save the settings
    4. Bring up the Query editor from the Microsoft SQL Server Management Studio by click on the “New Query” and make sure the
    5.Disconnect the query editor to any database by right click on the query editor select Connection To Disconnect
    6.Connect the query editor to the database epmEsbStudio by right click on the query editor select Connection To Connect to bring up the Connection to Database Engine dialog
    7. From the Connection to Database Engine dialog provide the SQL Server name, Authentication type, and enter “epmEsbStudio” as the user name and provide the password for this user, then click on the Options button, then select the Connection Properties tab and enter “epmesbStudio” for Connection to database. Click on the Connect button (you should be able to connected without any error or warnings)
    8. Type the following statement in the query editor, and execute it. The query should be executed without any problem.
    Create table Test (
    col1 varchar(5)
    go
    9. Verify the table is created under the “epmEsbStudio” Schema:
    10.Delete the table “Test”
    11.Start the Essbase Studio Server
    The properties file should read
    Example in server.properties
    catalog.db=epmesbStudio.epmEsbStudio
    catalog.username=epmesbStudio
    You can change "epmEsbStudio" to match your database being used for studio
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Hyperion Integration Server

    Will some one help me in understanding the HIS architecture?1.Firstly, how are the objects in HIS differet from Essbase Objects?2.Is Essbase server required even when you have Essbase integration server.If so, why is that needed when the essbase outline & Data is build & loaded from relational Data source & what role essbase server has if Integration server has its own objects?Is there any documentation on EIS?User

    Hi,Essbase Server is the OLAP Engine and EIS ist a mediator to load data from a relational datasource directly as an outline into the Essbase Database. If you are just up to load the data, you don't really need EIS in my oppinion. Its true benefits lie in drill-through and hybrid OLAP support.Since EIS ist just the "mediating" or loading-tool the objects are not per se in Essbase. You have to load and calculate Essbase in order to bring them into the server.If you have EIS installed there is a full documentation in your program group.Hope this helps.J?rg

  • Unable to download Oracle Essbase Server Release 11.1.1.4.0

    Hello,
    I am trying to download the file below (second from the top) and it is resulting in a broken link. I have tried multiple browsers and different times. This is for a customer who is extremely infuriated. Please help. They need to download Essbase Server 11.1.1.4
    http://www.oracle.com/technetwork/middleware/bi-foundation/downloads/essbase-11114-488321.html
    Oracle Essbase Server Release 11.1.1.4.0
    - for Windows (x86, x64, Itanium), Linux (x86, x86-64), HPUX (PA-Risc 64-bit, Itanium), AIX PowerPC (64-bit), and Solaris SPARC (64-bit)
    File1

    Essbase Server 11.1.1.4.0 is no longer available for download from OTN. Current releases are linked here:
    http://www.oracle.com/technetwork/middleware/essbase/downloads/index.html

  • Oracle application server control white screen problem

    Hi,
    I have installed Oracle Application server 10g. Both the infra and mid tier are running from the
    same machine.
    I am able to login to application server control from http://riysvdwh-004:7777, but
    unable to login to the application server control from http://riysvdwh-004:7778,
    i can login to portal and discoverer from the second link, but when i click on"log on to
    Oracle Enterprise Manager 10g Application Server Control:" i get a white page and 5-6
    pipe symbols moving at the top left of the screen and i dont get the next screen.
    I have checked the setupinfo.txt file in midtierhome/install location and found out that
    the hostname in the database connection string is different, instead of hostname riysvdwh-004
    , it is riysverp-004,
    Use only SSL connections with this Oracle Internet Directory:No
    Database Connection String: riysvdwh-004:1521:ASDBDEV.riysverp-004:ASDBDEV.riysverp-004
    Use the following URL to access the Oracle HTTP Server and the Welcome Page:
    http://riysvdwh-004:7778
    i think this could be a reason why i am unable to login from port 7778.
    Is there a way to make this work.
    would appreciate some suggestions.
    regards,

    1) Look in the $ORACLE_HOME/install directory ... ports used for the various functions such as EM are usually listed in the portlist.ini file in each Oracle Home
    2) Ask in the App Server forum. There is an assumption that questions in the Database forum are primarily focussed on Database issues. <g>

  • How to start / stop Oracle Directory Integration service (Win 2k3 Server)

    I'm running a standard OAS 10.1.2.0.2 instance on Windows Server 2k3, and am having trouble starting and stopping ODISRV instances. Well, at least I think I am, because I can't find any way of telling if they're actually running.
    The System Components in the Application Server Control web page shows the following to be all up and running:
    HTTP_Server
    Internet Directory
    OC4J_SECURITY
    Single Sign-On:orasso
    Management
    Which is backed up by opmnctl:
    opmnctl statusProcesses in Instance:
    ------------------------------------------------+---------
    ias-component | process-type | pid | status
    ------------------------------------------------+---------
    DSA | DSA | N/A | Down
    LogLoader | logloaderd | N/A | Down
    dcm-daemon | dcm-daemon | 1988 | Alive
    OC4J | OC4J_SECURITY | 5008 | Alive
    HTTP_Server | HTTP_Server | 2800 | Alive
    OID | OID | 4956 | Alive
    In the Application Server Control, when I select the Internet Directory instance, and then the Status for Directory Integration, it shows two Directory Integration Servers, which correspond to instances I've previously started using oidctl. However, I cannot see any odisrv processes running. The only relevant processes appear to be 2 x oidldapd, 1 x oidmon, and 2 x opmn.
    When I try to stop these using oidctl, the command returns no errors, but these instances do not go away. There is also only one odisrv log file from a week or so ago that does not appear to get updated. It is very possible that I stuffed the parameters of these instances up when I started them, so they may well be in an invalid statr at the moment.
    So I have the following questions:
    - Is there anyway I can clear all these instances out back to a clean slate to start again?
    - Should I be using opmnctl to start an ODISRV instance, or should I somehow configure it to run under opmnctl startall?
    Thanks,
    Barney

    Once you register the integration server, OIDSRV should auto start using oidmon.
    To cleanup
    -- opmnctl stopall
    -- delete entries from ods.ods_process table, if there are any.
    -- Restart instance using opmnctl

  • Oracle WebLogic Integration's Custom Control and SOA Suite Spring Component

    I crated this thread to inform users about some issues with the
    Oracle WebLogic Integration's Custom Control and SOA Suite Spring Component
    tutorial from
    http://www.oracle.com/technology/architect/soa-suite-series/wli_custom_control_spring_component.html
    - Fig. 6 doesn't agree with what's just above. This step isn't necessary because it can be create automatically when you make a class.
    - Fig. 11 shows the package
    sample.oracle.otn.soaessentials.javainteg
    and the class should be placed in
    sample.oracle.otn.soaessentials.javainteg.impl
    - The Business Tier -> Spring 2.5 might not be available. Extensions steps steps should be given.
    - Fig. 15 When lgger-context is created in Jdev 11.1.1.3.0 the Spring context is created in
    /mywork/SOASuiteWLIEssentials/JavaIntegration/src/META-INF
    while in the sample project it is in
    /mywork/SOASuiteWLIEssentials/JavaIntegration
    - Fig 18 has incorrect class name.
    - Fig 19 is incorrect: there is no Spring 2.5 SCA in Jdev 11.1.1.3.0; there is only WebLogic SCA. Where is the canvas mentioned above?
    - Fig 28 logger-context.xml is not where it is displayed in the fig. It is /src/Meta-Inf/.
    - Most of the fig from the deployment are not up to date.
    - I don't understand the need for the portion:
    "Implementing the use case in WLI" up to
    "Implementing the use case in SOA Suite"
    It confused me when I tried to follow the tutorial.

    I am also looking for the same .... Please share the CLoning script for SOA Suite from Prod to staging Env...
    Thanks.

  • Displays blank page when tried to access ORACLE Application Server Control

    Hi,
    I have successfully installed the Oracle SOA Suite using advance installation.
    But when tried to open ORACLE APPLICATION SERVER CONTROL by following the below path.
    start-> programs-> oracle-soa->ORACLE APPLICATION SERVER CONTROL, It displays a blank IE page.
    But when tried to open BPEL control or WSM control or ESB control, it takes me to the login page.
    Note: Started the SOA suite and the status of ASG component in the Start SOA page says Down.Does this affect in anyways?
    Would appreciate if anyone could throw some light on this.

    Hi All,
    I started reinstalling SOA suite and while installation, I encounter below warning.
    "A DHCP configuration was detected on this host" The installer also detected that the localhost name and network hostname differ. please resolve the networking issues by reffering the "Installing on DHCP computers" section in the installation guide."
    Note: Doing installation in the server.
    Wondering this could be the cause for displaying blank Application Server Control page.
    And here is, what it says in the installation guide.
    Note this limitation when running Oracle Application Server on DHCP computers: Oracle Application Server instances on DHCP computers cannot communicate with other instances running on other computers. For example, you cannot have OracleAS Infrastructure on one computer and a middle tier on another computer if any one of those computers uses DHCP. All the instances that need to communicate with each other need to run on the same computer. There are no limitations on clients: clients from other computers can access the instances running on the DHCP computer, as long as the client computer can resolve the DHCP computer on the network.
    The solution for this is installing loopback adapter. But the catch is, I have few webmethods running on the server. Wondering about the effects of Loop back adadpter on webmethods. Please someone throw some light.
    Regards
    jude.

  • Can't start Oracle Enterprise Manager Application Server Control:

    I've install AS 10g 10.1.2 on x64 Win XP64 with the option of just Oracle J2EE and web services.
    Everything installed fine but when I try to connect to the Enterprise manger server control I get :
    IOException in sending Request :: Connection refused: connect
    Reading the trouble shooting guide I see that maybe the Apache variable max connections needs upping. Mine was set to 150 and I upped it to 200 (and restarted)
    still not joy.
    can anyone help?

    According to metalink certification there is an issue with Win XP 64 bit for OAS 10.1.2.0.2 which is that
    Only Installation Types Supported is J2EE OracleAS Developer Kit
    Maybe you could consider OAS version 10.1.3.x ?

Maybe you are looking for