Oracle export from 8i

I have a newbie question - I searched the web for a long time but I cannot find any answers.
I understand that all packages,procedures and stored program units are stored in system tablespace or
sysaux tablespace. My requirement is to copy a few schemas from a source database into a target database. Is it enough to exp the schemas and bring them into the target database ? Will this bring the stored program units also across.Or will I need to export the sys/system schemas ?. I exported one schema and did the following in unix.
strings expdat.dmp|grep -i "package" but this returns nothing. I also opened the exp file and searched for the packages but to no avail. So I created a parfile (tables=somepackagename) but exp complained that the object was not found.
Any Ideas ?

Hello,
Oracle version in both source and target is 8.1.6.3.0I know it's not related to your question but, why do you use a 10 years old release ?
You may think to migrate someday to a newer release.
More over, from Oracle 10g, you may use DataPump (expdp / impdp) instead of the classical export/import and, with DataPump you can select accurately the Object TYPE you want to export or import by using EXCLUDE / INCLUDE parameters.
For instance, to export only Procedure, you may use this with DataPump:
INCLUDE=PROCEDUREElse about the content of expdat.dmp file you may try this:
imp <user>/<password> file=expdat.dmp log=<logfile>.log full=y SHOW=YIt's better than opening the dump file.
Hope this help.
Best regards,
Jean-Valentin
Edited by: Lubiez Jean-Valentin on Jun 27, 2010 12:06 PM

Similar Messages

I got error when I export database ORACLE 9i from solaris 9.

I want to export full database ORACLE 9i from SOLARIS 9 to import full database on ORACLE 9i on windows.
I set oracle environment and NSL_LANG with command:
bash-3.00$ export ORACLE_SID=TIS
bash-3.00$ export NLS_LANG=AMERICAN_AMERICA.TH8TISASCII
and then run command to export:
bash-3.00$ exp system/manager@TIS full=y file= /u03/dmp/TISfull.dmp log=/u03/dmp/exp_TIS.log
I got error message as:
Export: Release 9.2.0.1.0 - Production on Thu Oct 8 17:57:32 2009
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to: Oracle9i Enterprise Edition Release 9.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
Export done in TH8TISASCII character set and UTF8 NCHAR character set
About to export the entire database ...
. exporting tablespace definitions
. exporting profiles
. exporting user definitions
. exporting roles
. exporting resource costs
. exporting rollback segment definitions
. exporting database links
. exporting sequence numbers
. exporting directory aliases
. exporting context namespaces
. exporting foreign function library names
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions
. exporting system procedural objects and actions
. exporting pre-schema procedural objects and actions
EXP-00008: ORACLE error 25153 encountered
ORA-25153: Temporary Tablespace is Empty
ORA-06512: at "SYS.DBMS_AW", line 42
ORA-06512: at "SYS.DBMS_AW", line 105
ORA-06512: at "SYS.DBMS_AW", line 221
ORA-06512: at "SYS.DBMS_AW_EXP", line 264
ORA-06512: at line 1
EXP-00083: The previous problem occurred when calling SYS.DBMS_AW_EXP.schema_info_exp
. exporting cluster definitions
EXP-00056: ORACLE error 25153 encountered
ORA-25153: Temporary Tablespace is Empty
ORA-06512: at "SYS.DBMS_LOB", line 424
ORA-06512: at "SYS.DBMS_METADATA", line 1140
ORA-06512: at line 1
EXP-00056: ORACLE error 25153 encountered
ORA-25153: Temporary Tablespace is Empty
ORA-06512: at "SYS.DBMS_LOB", line 424
ORA-06512: at "SYS.DBMS_METADATA", line 1140
ORA-06512: at line 1
EXP-00000: Export terminated unsuccessfully
How can I solve this problem?
Any suggestion?

#### HOW to solve it.
## To check the default temporary tablespace of the database:
SQL> select property_name, property_value from database_properties;
## check DEFAULT_TEMP_TABLESPACE, if it use wrong temporary tablespace, run:
SQL> alter database default temporary tablespace temp;
## check user with temporary tablespace, run command:
SQL> select username, temporary_tablespace, account_status from dba_users;
## change temporary tablespace:
SQL> create temporary tablespace temp1 tempfile '/data/u01/app/oracle/oradata/TIS/temp_b.dbf' size 100m;
SQL> alter database default temporary tablespace temp1;
SQL> drop tablespace temp including contents and datafiles;
SQL> create temporary tablespace temp tempfile '/data/u01/app/oracle/oradata/TIS/temp01.dbf' size 100m autoextend off extent management local uniform size 1m;
SQL> alter database default temporary tablespace temp;
SQL> drop tablespace temp1 including contents and datafiles;
Thanks

Is it possible to export (expdp) oracle table from client machine ?

Is it possible to export (expdp*) oracle table from client machine, without using Remote desk top connection ?*
1) Database-10g server is in America
2) client machine is in India
3) Oracle client-10g software is installed in my machine
4) I am able to connect to the server, could see all tables
5) one table is with 35 million record, I wanted to export this table using data pump, is it possible?
note: without using Remort desk top connection.

Hi
I used the following syntax , but I am getting error
6) connect sys as sysdba
create directory test_dir as '/dbusr1/exp_test'
grant read, write on directory test_dir to user1;
7) expdp user1/pwd1@xyz tables=test_1 directory=test_dir dumpfile=test_file.dmp logfile=test_file.log
8) Errors
In linux prompt I am getting this error
-bash: expdp: command not found
In windows cmd prompt I am getting this error
ORA-39002: invalid operation
ORA-39070: Unable to open the log file.
ORA-29283: invalid file operation
ORA-06512: at "SYS.UTL_FILE";, line 488
ORA-29283: invalid file operation
9) why ?
-- Does the user ( "user1") should have any system level privilege ? to export his own table?
-- This folder ('/dbusr1/*exp_test'*) has write privilege in os level.
Thanks in advance
sbmk_design
Edited by: sbmk_design on Aug 24, 2009 12:06 AM

Export from Oracle 9i to be Imported into Oracle 10g on 32bit platform

Hi,
Currently, I am in the process of performing a Homogenous system copy
due to a domain change in our organization using R3load procedure.
I have taken the export of the existing system which is on Oracle 9i.
Initially, I was planning on setting up the new system on Oracle 9i,
now that Oracle 9i is out of support, I would have to go with Oracle
10g.
I found a note on this topic, SAP Note: 932722, however, this note
explicitly talks about database specific procedure of system copy and
also this note is for 64 bit platform.
Can you point me towards a Note or documentation which can be used as
reference for importing an Oracle 9i export into Oracle 10g on 32bit
platform(System copy procedure is R3load)?
OS- Windows 2003 32bit, ECC 5.0
Regards,
Vishnu.

Hi Gagan,
Thanks for your response,
As per your suggestion, I looked at the System Copy guide for Heterogeneous System Copy,
On service.sap.com/osdbmigration under FAQ's this is what I found,
I plan to copy my SAP system to a new hardware with the same OS and DB products but higher release levels. Is this a migration or a homogeneous system copy?
A change of the version of the operation system and/or the database system is not relevant in the context of a migration or a homogeneous system copy. If you don't change the product, but only the release level it is a homogeneous system copy. If you change OS and/or DB, it is a migration.
The system copy guide, doesn't explicitly talk about an export from Oracle 9i imported into Oracle 10g.
Can you point me to a guide or Note?
Regards,
Vishnu

Export from Oracle 8.0.2.0, Import to 10g

Hello,
I am trying to create a dump file from a Oracle 8.0.2.0 database. I am using the Oracle Data Manager Export wizard to do so. This dump needs to be imported to Oracle 10g. I have created a blank database in 10g with the same name as in 8.0.2 and I can open it in Enterprise Manager using SYS user. I tried "Import from Export files" from Enterprise manager 10g but it fails to import. Can someone please tell me if I am missing somethings here?

This is a duplicate of this thread
Export from Oracle 8.0.2.0, Import to 10g
Justin

OBIEE Report Export from Dashboard to Excel doesn't suppress the columns as

OBIEE Report Export from Dashboard to Excel doesn't suppress the columns as expected even after the properties are set to Suppress in the report. In Dashboard it is suppressed Properly but in the excel export it is not suppressed and values for the columns are repeated.
Added the following to the instanceconfig :
<Download>
<Export xsi:type="excel">
<DataValue>UseFormattedValue</DataValue>
<RepeatRows>false</RepeatRows>
</Export>
</Download>
But then could not restart services.The following error occured :
Util Logger] Exception occurred:
 Severity:1
 Type:PKN3saw9ExceptionE
 File:saxreader.cpp
 Line:681
 Message:Sax parser returned an exception.
Message: The prefix 'xsi' has not been mapped to any URI, Entity publicId: /oracle/ofm/instances/instance1/config/OracleBIPresentationServicesComponent/coreapplication_obips1/instanceconfig.xml, Entity systemId: , Line number: 43, Column number: 26
Edited by: 887111 on Mar 27, 2013 11:23 PM

Problem solved!!
 
See this part of the query:
 
if :P15_GESTOR_PROPIETARI='-3' then 
w:= w||' AND (("STASVWREPORT_TASQUES"."GES_GES_ID"=:GESTOR '; 
w:= w||'OR "STASVWREPORT_TASQUES"."GES_GES_ID_ESTA_ASSIGNADA"=:GESTOR)'; 
w:= w||'OR ("STASVWREPORT_TASQUES"."AGR_***_***_ID"=:P15_CANVI_DE_CLUB ';
w:= w||' AND "STASVWREPORT_TASQUES"."PUBLICA"=''S''))'; 
end if; 
 
when instead of :P15_CANVI_DE_CLUB I put a value (say ''EE'') it works correctly, finally I created an application item (ASSOCIAT) and when when I change :P15_CANVI_DE_CLUB I set :ASSOCIAT to the same value and the query is based on this application item:
 
if :P15_GESTOR_PROPIETARI='-3' then 
w:= w||' AND (("STASVWREPORT_TASQUES"."GES_GES_ID"=:GESTOR '; 
w:= w||'OR "STASVWREPORT_TASQUES"."GES_GES_ID_ESTA_ASSIGNADA"=:GESTOR)'; 
w:= w||'OR ("STASVWREPORT_TASQUES"."AGR_***_***_ID"=:ASSOCIAT '; 
w:= w||' AND "STASVWREPORT_TASQUES"."PUBLICA"=''S''))'; 
end if;

Error while Export from 10g and import to 11g

Hi,
I get the following error on few tables when i try to export from 10g and import to 11g DB.
import done in US7ASCII character set and AL16UTF16 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)
. importing TBAADM's objects into TEST
. . importing table "ACCT_AUTH_SIGN_TABLE"
IMP-00019: row rejected due to ORACLE error 12899
IMP-00003: ORACLE error 12899 encountered
ORA-12899: value too large for column "TEST"."ACCT_AUTH_SIGN_TABLE"."MODE_OF_DESPATCH" (actual: 3, maximum: 1)
How to over come this ?
Regards,
jibu

Jibu wrote:
Hi,
I get the following error on few tables when i try to export from 10g and import to 11g DB.
import done in US7ASCII character set and AL16UTF16 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)
. importing TBAADM's objects into TEST
. . importing table "ACCT_AUTH_SIGN_TABLE"
IMP-00019: row rejected due to ORACLE error 12899
IMP-00003: ORACLE error 12899 encountered
ORA-12899: value too large for column "TEST"."ACCT_AUTH_SIGN_TABLE"."MODE_OF_DESPATCH" (actual: 3, maximum: 1)
How to over come this ?
Regards,
jibu
[oracle@localhost sql]$ oerr ora 12899
12899, 00000, "value too large for column %s (actual: %s, maximum: %s)"
// *Cause: An attempt was made to insert or update a column with a value
//         which is too wide for the width of the destination column.
//         The name of the column is given, along with the actual width
//         of the value, and the maximum allowed width of the column.
//         Note that widths are reported in characters if character length
//         semantics are in effect for the column, otherwise widths are
//         reported in bytes.
// *Action: Examine the SQL statement for correctness. Check source
//          and destination column data types.
//          Either make the destination column wider, or use a subset
//          of the source column (i.e. use substring).

Error in jdevelper 11g when opening a project exported from bpm studio 10.3

Hello I hope someone can help me with this error, thanks in advance.
I installed soa suite 11G (including ps2) but when i open a project exported from bpm studio 10.3 i have the following error.
"An unexpected severe error has ocurred in jdeveloper"
Performing action JDeveloper Forum[ from oracle.ide.log.MessagePage ]
Performing action About[ from oracle.ide.log.MessagePage ]
Invoking command: [ from oracle.ide.log.MessagePage ]
Performing action Open...[ from oracle.ide.log.MessagePage ]
Performing action Open...[ from oracle.bpm.fusion.ui.editor.FusionEditor ]
Performing action Open...[ from oracle.ide.ceditor.CodeEditor ]
Performing action Close All[ from oracle.ide.ceditor.CodeEditor ]
Performing action Import...[ from oracle.ide.navigator.ApplicationNavigatorWindow ]
Jul 15, 2010 1:36:03 PM oracle.bpm.project.io.serializers.model.bpmn.BPMN20Loader load
SEVERE: unexpected element (uri:"http://www.wfmc.org/2004/XPDL2.0alpha", local:"Package"). Expected elements are <{http://xmlns.oracle.com/bpm/OracleExtensions}Annotations>,<{http://xmlns.oracle.com/bpm/OracleExtensions}AttributeExpression>,<{http://xmlns.oracle.com/bpm/OracleExtensions}BooleanFeature>,
......................... .... >
javax.xml.bind.UnmarshalException: unexpected element (uri:"http://www.wfmc.org/2004/XPDL2.0alpha", local:"Package"). Expected elements are <{http://xmlns.oracle.com/bpm/OracleExtensions}Annotations>,<{http://xmlns.oracle.com/bpm/OracleExtensions}AttributeExpression>,<{http://xmlns.oracle.com/bpm/OracleExtensions}BooleanFeature>,
<{http://www.omg.org/bpmn20}userTask>

Hi,
I have the same error. Please if you have the solution or any workaround, i 'll very appreciate if you post it here
Thanks in advance!

Manual export from 8.1.6 to 9.2.0

Hello,
I'm trying to make a manual export from a 8.1.6 database to an 9.2.0.
When i send my command exp user/passwd .... i have this error :
Connected to Oracle 8 Release 8.0.5.0.0
EXP--00037 Export views not compatible with database version
If someone have an idea ....
thank's in advance

I'm trying to make a manual export from a 8.1.6 database to an 9.2.0.
When i send my command exp user/passwd .... i have this error :
Connected to Oracle 8 Release 8.0.5.0.0
EXP--00037 Export views not compatible with database versionIt looks like you're trying to use the 8.0.5.0.0 export utility against an 8.1.6 database. You need to use the 8.1.6 export
utility.

Export from Apex 3.2 and import to Apex 4.0

I apologize if this has been asked before (and I am sure it has).
We are about to move all our Apex/Oracle apps to a server where Apex 4.0 is installed. Our current Apex version is 3.2. My question is can we export from Apex 3.2 and import in Apex 4.0 and expect everything to work (assuming it all works fine in Apex 3.2 and all Oracle objects were moved properly to the new server , both servers have Oracle 11g).

I am having trouble finding "update application" under any of the utilities.
Also one of my applications gives me the following error when I try to import it from Apex 3.2. to 4.0
ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-02290: check constraint (APEX_040000.WWV_FLOW_WS_RPT_CHART_AGG_CK) violated <pre>begin wwv_flow_api.create_worksheet_rpt( p_id =&gt; 24053127534342788+wwv_flow_api.g_id_offset, p_flow_id=&gt; wwv_flow.g_flow_id, p_page_id=&gt; 60, p_worksheet_id =&gt; 24052412232342516+wwv_flow_api.g_id_offset, p_session_id =&gt; null, p_base_report_id =&gt; null+wwv_flow_api.g_id_offset,
I have no clue how to fix that.
George

Oracle Export and Import of XE application

I am trying to do an Oracle Export of an EX application and an Import to another PC. Can it be done?
I have encountered several problems. Either it brought over the application, but no Pages or I cannot access the Login page.
My reason for this is to handle application updates/changes for 50 odd remote users.
I am using APEX Release 2.1.0.00.39

Yes it was a full database export with all schemas.
I ran the following query before and after the import:
select object_type, count(*) from dba_objects where owner = 'FLOWS_020100' group by object_type order by 1;
After the IMPORT, I had less LOBs (4) and Tables(8).
The missing tables are:
DR$WWV_FLOW_OH_IDX$I
DR$WWV_FLOW_OH_IDX$K
DR$WWV_FLOW_OH_IDX$N
DR$WWV_FLOW_OH_IDX$R
DR$WWV_FLOW_OH_PT_IDX$I
DR$WWV_FLOW_OH_PT_IDX$K
DR$WWV_FLOW_OH_PT_IDX$N
DR$WWV_FLOW_OH_PT_IDX$R
The script below was used to reinstate the SYS grants to flows_020100:
Select owner||':'||table_name||':'||privilege from dba_tab_privs where grantee='FLOWS_020100' and grantor='SYS';
The results from the script:
grant SELECT on SYS.OBJ$ to Flows_020100;
grant SELECT on SYS.USER$ to Flows_020100;
grant SELECT on SYS.V_$SESSION to Flows_020100;
grant SELECT on SYS.V_$PARAMETER to Flows_020100;
grant SELECT on SYS.V_$TIMER to Flows_020100;
grant SELECT on SYS.DBA_IND_COLUMNS to Flows_020100;
grant SELECT on SYS.DBA_OBJECTS to Flows_020100;
grant SELECT on SYS.DBA_ROLLBACK_SEGS to Flows_020100;
grant SELECT on SYS.DBA_ROLE_PRIVS to Flows_020100;
grant SELECT on SYS.DBA_SYS_PRIVS to Flows_020100;
grant SELECT on SYS.DBA_SEQUENCES to Flows_020100;
grant SELECT on SYS.DBA_TABLES to Flows_020100;
grant SELECT on SYS.DBA_TAB_COLUMNS to Flows_020100;
grant SELECT on SYS.DBA_TAB_PRIVS to Flows_020100;
grant SELECT on SYS.DBA_USERS to Flows_020100;
grant EXECUTE on SYS.UTL_FILE to Flows_020100;
grant EXECUTE on SYS.UTL_SMTP to Flows_020100;
grant EXECUTE on SYS.UTL_HTTP to Flows_020100;
grant SELECT on SYS.DBA_SEGMENTS to Flows_020100;
grant SELECT on SYS.DBA_FREE_SPACE to Flows_020100;
grant SELECT on SYS.DBA_DATA_FILES to Flows_020100;
grant SELECT on SYS.DBA_TABLESPACES to Flows_020100;
grant EXECUTE on SYS.DBMS_LOCK to Flows_020100;
grant EXECUTE on SYS.DBMS_SYS_SQL to Flows_020100;
grant EXECUTE on SYS.DBMS_FLASHBACK to Flows_020100;
grant EXECUTE on SYS.DBMS_RLS to Flows_020100;
grant EXECUTE on SYS.DBMS_CRYPTO to Flows_020100;
grant EXECUTE on SYS.WWV_FLOW_VAL to Flows_020100;
grant SELECT on SYS.FLOW_SESSIONS to Flows_020100;
grant SELECT on SYS.FLOW_PARAMETERS to Flows_020100;
grant SELECT on SYS.FLOW_SQLAREA to Flows_020100;
grant SELECT on SYS.FLOW_SGA to Flows_020100;
32 rows selected.
FYI:
When I Imported this last time, I Imported by users. Three imports statements for each user flows_020100, flows_files and apex_public_user (XE_DBA).
imp system/passwrd file=g:\common\xe\xedba_full.dmp ignore=y fromuser=flows_020100 touser=flows_020100 log=c:\flows_logs.log
imp system/passwrd file=g:\common\xe\xedba_full.dmp ignore=y fromuser=flows_files touser=flows_files log=c:\files_logs.log
imp system/passwrd file=g:\common\xe\xedba_full.dmp ignore=y fromuser=xe_dba touser=xe_dba log=c:\xe_dba_logs.log
as opposed to my initial IMPORT:
imp system/passwrd file=g:\common\xe\xefull.dmp ignore=y
FYI: I am not getting the Err-1016 "4550" Page "1" not found error. It now lets me log in , but there are[b] no applications. It should have been 5 applications.
Hey, in typing the above statement, I realized that my login page is "101" (default) and Page "1" is a data entry page.

How to import a *.dmp file (exported from 10g) to 8i database?

Hi everybody!
Could anybody tell me how to import a *.dmp file (exported from 10g) to 8i database?
I have tried but it seemed to be error "wrong version".
Thanks a lot!

From 10.1.0 to 8.1.7 => Use the EXPORT 8.1.7 to export the data from the 10.1.0 database and IMPORT 8.1.7 to
import the data into the 8.1.7 database.
Metalink note 132904.1 Subject: Compatibility Matrix for Export & Import Between Different Oracle
Nicolas.

Export from 8.1.6 to 8.1.7

What and where is the utility that will export from 8.1.7 to an
8.1.6 dmp file.
I have seen it mentioned as exp816 the following posting
http://lists.suse.com/archive/suse-oracle/2001-May/0127.html but
I can't find it anywhere.
I have a source 8.1.7 database on Solaris and a target 8.1.6 on
W2000. Character sets and NCHAR character sets are the same on
source and target (US7ASCII) but I keep getting the following
error...
Any ideas anybody
Regards
Liam Caffrey
[email protected]
Import file: EXPDAT.DMP >
Enter insert buffer size (minimum is 8192) 30720> 4096
Export file created by EXPORT:V08.01.07 via conventional path
import done in WE8ISO8859P1 character set and US7ASCII NCHAR
character set
import server uses US7ASCII character set (possible charset
conversion)
IMP-00069: Could not convert to environment national character
set's handle
IMP-00000: Import terminated unsuccessfully

Hi,
I have the same problem about 5 days ago.
What I did is change the environment set of NLS_LANG into the
same dump file character set. I change NLS_LANG in environment
parameter and in registry.
Evan

Error after Oracle Migration from DMTS into LMTS

Hello ,
I'm sorry, I posted my question again from ABAP General into this forum ABAP Dictionary. I think that here someone can help me in order to proceed with my job in the Development and in production system.
We are using SAP R/3 4.6C, with SAP kernel 2271, Oracle 9.2.0.5 and HP-UX 11.23
I did the Oracle migration from dictionary into locally managed tablespaces on the QTS system (and before that the same migration on a separate system as a copy from production):
1. export data and index tablespace with Oracle export command (exp: for PSAPCLUD and PSAPCLUI)
2. import into file for creation of indexes
3. Drop the data and corresponding index tablesspace with brtools - brspace
4. recreate the tablespaces with sapdba or with sqlplus (using the ddl scripts created before dropping the tablespaces) - - I think is my problem
5. import the data with Oracle import command
6. import the indexes from the previously created sql file
7. check optimizer statistics, analyze and next extents
But there is one problem.
Because I have also used the sapdba and ddl sql for recreating the tablespaces, I didn't specify the SAP data class for the newly created tablespace.
And in the tables TAORA, IAORA and DDART (what is very unclear for me) 3 rows missing for the USER1, TEMP and ??? data class.
If you try to import some transport in the corresponding tablespace which data class is missing an error ocur.
I have read the Note 646681 - Reorganizing tables with BRSPACE, and I saw the part: If the <reorg_tsp> tablespace contains any of the following tables: SDBAH,SDBAD,DBAML,DBATL,MLICHECK,TGORA,IGORA,TSORA,TAORA, IAORA,SVERS,DD02L,DD09L,DDNTT,DDART,DARTT or SAPLIKEY (SAPLIKEY is only available in NetWeaver 2004s or higher), then you should move them to the tablespace <aux_tsp> by online reorganization using BRSPACE:
brspace -f tbreorg -t <table_list> -n <aux_tsp>
Do you have the same problem?
Do you know how I can solve the problem now after the hole migration was done?
How can I dedicate tablespace data class?
Is it enought to just enter the same rows into the TAORA, IAORA and DDART?
Thanks,
Many regards,
Ruzica

Apparently you are trying to mix 32-bit code and 64-bit code. You must ensure that the 32-bit or 64-bit option is used consistently on every command, compiling and linking. The form of the option can depend on the version of the C compiler you are using, and whether you are on an x86 or sparc system. Consult the Pro*C and C compiler documentation.

Oracle Export and import

Hi,
I just want to do the export and import.
Source DB - Oracle 10g on Solaris 64 bit OS. (Export)
Destination DB - Oracle 9i on Windows OS (import).
Kindly confrm that these export and import is possible in oracle.
Thank you,

add version=9.x while taking the export from solarisThat advice doesn't apply for 10g to 9i.
The export has to be done with the 9i "exp" binary, from a 9i ORACLE_HOME. It can be done over a SQLNet connection.
The subsequent import has to be done with the 9i "imp" binary.
Hemant K Chitale

Oracle export from 8i

Similar Messages

Maybe you are looking for