Oracle JDeveloper 10.1.2 with newer JDK on Windows

Hi,
I had jdk 1.4.2 installed on my Windows XP machine, and had developed applications using JDeveloper 10.1.2.
I'm upgrading to Windows 7, and my question is whether I can install a higher version of JDK (say 6.0) on my machine, and also download a complete installation of JDeveloper 10.1.2, so that I can refer to the SDK version 1.4.2 that comes with the JDeveloper installation?
Or is it required that I should have jdk 1.4.2 installed on my Windows 7 to work with applications that I developed using JDeveloper 10.1.2?
Any help appreciated.
Thanks!

You should be able to do what you want (install JDK 6 and then use the inbuilt JDK 1.4.2 with the old JDev).
The problem you may likely have is that JDev 10.1.2 is so old as to be unsupported on Windows 7 - if I recall correctly, it's not even supported on Vista. You may need to use XP mode of Windows 7 or some other virtualisation technology to get the older Jdev working.
John

Similar Messages

  • How can I update Jdev with new JDK

    I currently have JDev323 and I wonder how can I update it with new JDK 1.4.

    What you should do is update the JDeveloper version that you use - 3.2 is sooooo old.
    Get Oracle JDeveloper 9.0.4 and you'll have JDK 1.4 built in.
    I don't remember if that feature was in 3.2 but since JDeveloper 9 you can switch the JDK - it is in the online help - do a search for the word JDK.

  • How to configure my oracle jdeveloper 11g preview 4 with oracle 8i database

    hi every one
    my requrirement is to configure my oracle jdeveloper 11g preview 4 with oracle 8i database with (thin driver)
    thanks in advance

    Prapan,
    JDev 11g TP4 comes with 11g JDBC drivers, which do not support connecting to any database v 9.0.1 or earlier.
    So, back to you... depends upon what you want to do. If you want to write your own code to connect to a database using 11g, get ahold of some JDBC drivers that support 8i and have away. If you're talking about getting the database development stuff (e.g. the embedded SQLDeveloper) to work, you're probably out of luck.
    So, please define "configure my oracle jdeveloper 11g preview 4 with oracle 8i database"
    John

  • Configuring OC4J to work with new JDK

    Hi all, due to some java related errors, I re-installed JDK.
    I had C:\Program Files\Java\jdk1.7.0 and the new one is C:\Program Files\Java\jdk1.7.0_01
    I did the following:
    1) updated it in server.xml
    2) updated it in instanceconfig.xml.
    3) Add C:\Program Files\Java\jdk1.7.0\bin to "path" in environment variables. Javac and java command runs fine in command prompt.
    4) BI Server, BI Java Host, BI Presentation Services runs fine in SERVICES
    But 0C4J is not working. When I try to start it from START, the command prompt just flickers for a split second and disappears.
    When re-installing JDK, is there anything else I need to configure aside from those server.xml and instanceconfig.xml? Looking at the manuals, I can only find instructions on configuring when you are installing BI, not changing/reinstalling JDK when BI is already installed.
    Many thanks.
    Edited by: AI on Nov 21, 2011 4:46 PM
    Edited by: AI on Nov 21, 2011 4:48 PM

    Hi J.A.M
    This sort of relates to the issue about 500 Internal Error you answered in the other thread. Turns out the there was something wrong with java because I couldn't Javac compile at all from command prompt on a normal Java file (hence BI couldn't either). Which is why I tried to reinstall it.
    After installation, I rebooted the machine few times (which in turn would have rebooted everything else).
    Running javac on command prompt works, and so does BI Java Host.
    Only OC4J is mucking up. Obviously it's not hooked on properly to the new JDK because it was working somehow with the previous (faulty) JDK.
    I tried going into C:\OracleBI\oc4j_bi\bin folder (via cmd) and ran "oc4j.cmd -start".
    You are right, showed me the error message which I couldn't see earlier. The message was:
    "please make sure the JAVA_HOME environment variable is define correctly."
    So I configured the JAVA_HOME to point to the new JDK, rebooted the machine. Ran it again.
    It still asks me to define JAVA_HOME correctly.
    Edited by: AI on Nov 21, 2011 6:43 PM

  • How can i get my ps 3.0 to install on my laptop ? compatibility issues with newer version of windows

    how can i get my ps 3.0 to install on my laptop ? compatibility issues with newer version of windows

    It's hopelessly outdated. It's simply not compatible.
    Mylenium

  • Update registration with new tags (C# Windows App)

    Hello!
    I am trying to update registration of my application with new tags.
    I want to remove old tag "DELang" and add a new tag "ENLang".
    I am using this official article Registration Management
    I have add
    using NuGet package WindowsAzure.Messaging.Managed
    to my application and have create hub variable.
    var hub = NotificationHubClient.CreateClientFromConnectionString("{connectionString}", "hubName");
    But this variable doesn't support GetRegistrationAsync or UpdateRegistrationAsync.
    What is wrong?

    When you reconnect your Lightroom catalog to the photos on your Mac, you need to follow these instructions: Adobe Lightroom - Find moved or missing files and folders
    You want to reconnect the top-level folders where your photos were stored as shown in Figure 4.
    There is no importing of photos involved, so there is no need to check or uncheck "do not import duplicates"

  • Cannot sync ipad Air with new computer running windows 8

    With new computer (HP Envy 27) running with windows 8, I have the latest iTunes installed, and successfully transferred my itunes library (books, music, TV programs, podcasts etc) to the new computer.  I've tried multiple times to sync my iPad Air with no success.  Only the Podcasts and Apps have been synched.  No TV programs, and only a few music albums and books came across, despite the fact I selected the albums and books to synch individually.  Can anyone help please?

    Since you are able to sync some content and not all, I would first unsync (uncheck the box and hit apply) for a category (lets say books), then go back and re-sync (check the box again) and select just one item that did not sync before.  If it syncs then you know it's not the content.
    If it doesn't sync, then you will have to do a little more testing to see what it is, like trying to sync from a new library or new user.
    Also, verify in itunes what's on the iPad by showing the sidebar and clicking the arrow next to the iPad on that sidebar.  You can see what has made it onto the iPad.  If its on the iPad there, but not showing up in the proper place on the iPad's screen (like books in iBooks) then you will need to troubleshoot the device up to maybe even restoring it as new.

  • [ANN] New Course - Oracle JDeveloper 10g: Build Applications with ADF

    Register for this Oracle University course online at:
    http://education.oracle.com/web_prod-plq-dad/plsql/show_desc.redirect?dc=D16975GC10
    Upcoming course at VA, Reston next week.

    Yes more location will follow.
    To get the course near you, you might want to ask for it at:
    http://www.oracle.com/go/?&Src=2400827&Act=4
    This way Oracle University will know where there is demand for the course.

  • USB to Parallel Cable Adapter not working with New PC and Windows 8.1

    With the demise of parallel ports on PCs, I purchased a USB to Parallel cable adapter several years ago.  I used this combination to successfully connect my Apple Laserwriter 16/600PS printer to my HP Pavilion Slimline s7600n PC (running Windows XP, SP3).  I've decided to upgrade, I now have an HP Slimline s5-1020 PC running Windows 8.1.  However, I cannot get the printer to printer properly.  When the print command is executed, the printer spits out page after page of 1-line jibberish at the top of the page.  This continues forever until either the paper runs out or I abort the document by opening the paper drawer.  Only after full shutdown of both printer and computer and reboot of both will the printer clear itself of the corrupted print instruction.
    The printer is also connected to an Apple MacIntosh 7200/120 computer via AppleTalk and it prints fine.  Also, I reconnected the printer to my old Slimline s7600n computer and it prints perfectly.  I have to assume that either new PC or OS is the source of the problem.
    Any and all help/suggestions would be appreciated.
    Billvonr

    Hi,
    You have to go to the maufacturer site to check is there any Windows 8.1 driver for it. I know many cable/adapter vendors stopped to develope from Windows 7.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Issues with New Skype for Windows 6.22.81.104

    Following are the issues faced with the new version of skype
    Contacts are online, but status is showing as offline
    Not able to send messages, still in progressing status
    Not able to change the skype status
    "Go to Support, Go to Community" no action is happening
    Skype call is not disconnecting
    I experienced all these issues in 10 mins. I want to goback to previous version which is perfect.
    Regards
    Kamal Deep

    I just uninstalled this latest version. I'm a week old with Skype, I use it for my 8 year old nephew in Jersey.
    Point is, it won't even let me minimise the new screen, I can't delete the person who I invited to be a contact who hasn't responded, (especially important because I thought it was my sister!) The few thing I previously learned are gone, I feel like I HAVE ABSOLUTELY NO CONTROL OVER THIS NEW FORMAT!
    How come I can only minimze, or FULL SCREEN? nothing inbetween? What if I want to multitask? My taskbar is GONE when I'm signed in.
    I'm going to turn updates off, and put the last version on...
    thanks for ruining something I thought I might enjoy! And Jesus, I WILL NEVER COMBINE FACEBOOK WITH THIS, SO STOP ASKING!!!!!! I HATE FACEBOOK, it's a small necessity I use "maybe" twice a month!

  • Weblogic 9.0 on WinXP 64bit with Sun JDK 64bit

    I installed Weblogic 9.0 on WindowXP 64bit version and it's fine with build in Sun's JDK and JRockit JDK but as soon as I switch to Sun's 64bit implementation of JDK (update 5) it fails to start.
    Am I doing something wrong or it is not compatible with 64bit JDK on windows platform?
    If so are there any plans to make it compatible with Sun's JDK 64bit version on windows platform in the near future, or any chance of 64bit JRockit JDK for windows?

    On 07/20/2015 06:35 AM, Itzhak Hovav wrote:
    > hi
    > [snip]
    > [root@p22 eclipse]# cat eclipse.ini -startup
    > plugins/org.eclipse.equinox.launcher_1.3.0.v20120522-1813.jar
    > --launcher.library
    > plugins/org.eclipse.equinox.launcher.gtk.linux.x86_64_1.1.200.v20120913-144807
    >
    > -showsplash
    > org.eclipse.platform
    > --launcher.XXMaxPermSize
    > 256m
    > --launcher.defaultAction
    > openFile
    > -vmargs
    > -Xms40m
    > -Xmx512m
    > [snip]
    Try this: http://wiki.eclipse.org/Eclipse.ini. You should have read the
    sticky posts at forum's top for getting started help.

  • Jdk-7u3-windows-x64 installation issues

    Hi,
    I've just download the jdk-7u3-windows-x64.exe and jdk-6u30-windows-x64.exe and tried install them on my window 7 professional service pack 1 platform, but both installations failed with the error message "...\jdk-7u3-windows-x64.exe is not a valid win32 application" and "...\jdk-7u3-windows-x64.exe is not a valid win32 application". However, when I install with the jdk-6u26-windows-x64.exe and jdk-7-windows-x64.exe, it's fine. Please help me how to fix the issue to update the new java package.

    Thank you, Gimbal2. It's really strange, but it's true. I give you some screen snipping as following:
    1, My system:
    [http://farm8.staticflickr.com/7127/6856787896_fc99f16f7d_b.jpg]
    2, When install the jdk-7u3-x64
    [http://farm8.staticflickr.com/7199/7002892173_2657c97bbd_b.jpg]
    3, When install the jdk-6u30-x64
    [http://farm8.staticflickr.com/7105/6856777806_41d774bb4e_z.jpg]
    4, When install the jdk-7-x64
    [http://farm8.staticflickr.com/7277/7002892257_3358af89a6_b.jpg]
    5, When install the jdk-6u26-x64
    [http://farm8.staticflickr.com/7261/6856777882_57927e0b1e_b.jpg]
    or you can find these images at my flckr photostream : [http://www.flickr.com/photos/ideaarchitect]
    Edited by: user4200434 on Mar 21, 2012 7:08 AM

  • New update for windows 8.1

    hello
    I have problems now with new updating from windows ( after security updating last week)
    my computer delete all programs and go back to windows 8.0 as the first one  ( the  windows when i bought it ) i update it last month with no issue but because of last windows updating i lose all my files and programs!
    i try my best to updating to windows 8.1 but they show me there is error and i cannot do that and they restore again to orginal windows 8.0 as same Version hen i bought it
    any assist for this issue?
    all the problem came after windows say there is very important file i should downloads it last 3 days ago
    Solved!
    Go to Solution.

    Try running the McAfee Consumer Products Removal Tool to scrub the remnants of McAfee off your system. Sometimes when uninstalling security software it leaves bits behind. Running this tool should deal with that.
    Hoov
    Microsoft MVP - Consumer Security
    SpywareHammer.com

  • Problem with "Oracle JDeveloper News" RSS ?

    This message is probably misplaced but I don't know who to send it to. I keep getting the same message from "Oracle JDeveloper News" titled "New EA Step-by-Step Tutorials" dated 9/19/2005 4:46 AM with as malformed website address of "/technology/products/jdev/101/tutorials/index.htm". On last count I must have received at least 10 of them in the last 5 or 6 days.
    Does anyone know who to contact to get it to stop? It's getting a little annoying.
    TIA

    I'm using Mozilla Thunderbird - Version 1.0.6 (20050716). Judging from the question, I assume that others are not having this problem.
    Cheers

  • JDBC Driver problem when using JDeveloper 10.1.2 with JDK 1.4

    I hope someone can help me solve this problem (which I am sure others have encountered).
    The JDK that is downloaded together with JDeveloper 10.1.2 is JDK 1.4.2. However, I believe the JDBC jar files that comes together with JDeveloper 10.1.2 are for JDK 1.2 : classes12.jar, classes12dms.jar and nls_charset12.
    What I did was I replaced the JDeveloper 10.1.2 JDBC (JDK 1.2) jar files with the JDBC jar files from JDeveloper 10.1.3 download i.e. ocrs12.jar, ojdbc14.jar, ojdbc14dms.jar and orai18n.jar and then create a new JDBC Library which references these new jar files. I was able to successfully run my applications (under my modified JDeveloper 10.1.2) using this new JDBC library (instead of the original 'Oracle JDBC' library). However, when I created a Database Connection in this modified JDeveloper 10.1.2, the connection was unsuccessful. I received the error message "Unable to find driver: oracle.jdbc.driver.OracleDriver".
    My organisation requires me to use JDK 1.4.2 and therefore I cannot use JDeveloper 10.1.3 (which I did not encounter any JDBC problem) as it is certified to run only on JDK 1.5.
    Please help. Thanks.

    JDev 10.1.2 is quite old, and was never certified for Windows 2008.
    No need to post multiple threads - same question as {thread:id=2271522}

Maybe you are looking for