Oracle Linux 6 update --- wirelees network card not working.

Hello,
The only problem I am having is with my wireless network card(built-in). Should I buy a new wireless card that can be used with Oracle Linux?
Here is some info about my laptop:
$ lspci -v | grep -i net
04:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
virbr0 no wireless extensions.
virbr0-nic no wireless extensions.
$ lsmod
Module Size Used by
fuse 49340 0
ipt_MASQUERADE 1780 3
iptable_nat 4651 1
nf_nat 16615 2 ipt_MASQUERADE,iptable_nat
iptable_mangle 2603 0
tun 9430 1
bridge 39245 0
stp 1503 1 bridge
llc 4140 2 bridge,stp
autofs4 18216 3
sunrpc 168053 1
cpufreq_ondemand 6844 4
powernow_k8 12957 0
ipt_REJECT 1621 4
nf_conntrack_ipv4 7140 6 iptable_nat,nf_nat
nf_defrag_ipv4 1033 1 nf_conntrack_ipv4
iptable_filter 2123 1
ip_tables 8337 3 iptable_nat,iptable_mangle,iptable_filter
ip6t_REJECT 3390 2
xt_tcpudp 1879 6
nf_conntrack_ipv6 14880 2
xt_state 1042 5
nf_conntrack 59159 6 ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4,nf_conntrack_ipv6,xt_state
ip6table_filter 2231 1
ip6_tables 9601 1 ip6table_filter
x_tables 12478 8 ipt_MASQUERADE,iptable_nat,ipt_REJECT,ip_tables,ip6t_REJECT,xt_tcpudp,xt_state,ip6_tables
ipv6 225173 34 ip6t_REJECT,nf_conntrack_ipv6
uinput 5260 0
rfkill 13768 1
i2c_piix4 10150 0
joydev 7304 0
microcode 11243 0
uvcvideo 47429 0
videodev 29537 1 uvcvideo
v4l1_compat 11137 2 uvcvideo,videodev
i2c_core 23454 2 i2c_piix4,videodev
pcspkr 1386 0
serio_raw 3380 0
r8169 29689 0
mii 3889 1 r8169
snd_hda_codec_realtek 197227 1
snd_hda_codec_atihdmi 2039 1
snd_hda_intel 19505 2
snd_hda_codec 62689 3 snd_hda_codec_realtek,snd_hda_codec_atihdmi,snd_hda_intel
snd_hwdep 4852 1 snd_hda_codec
snd_seq 43513 0
snd_seq_device 5326 1 snd_seq
snd_pcm 63799 2 snd_hda_intel,snd_hda_codec
snd_timer 16064 2 snd_seq,snd_pcm
snd 49098 12 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq,snd_seq_device,snd_pcm,snd_timer
soundcore 5387 1 snd
snd_page_alloc 6456 2 snd_hda_intel,snd_pcm
usb_storage 35626 0
ahci 28838 2
pata_acpi 2307 0
ata_generic 2403 0
pata_atiixp 2852 0
ohci_hcd 25812 0
video 16346 0
output 1723 1 video

The actual problem seems to be that you are using the wrong Linux distribution for you Laptop. Enterprise Linux was not designed for consumer grade hardware. To further troubleshoot the problem you will need to check for relevant output of "dmesg", i.e. check if the firmware and driver that was loaded for the device. You should also check "lspci -v" w/o grep to see more detailed information for the device.
Are you trying the latest Oracle Linux 6 update 2?
What is your hardware?
Beware that no Oracle database products are yet certified for EL6 yet, so you should better stick to Oracle Linux 5 update 7 instead.
If the purpose of your installation is research and development I suggest to install Windows as your primary OS and run Oracle Linux inside Virtualbox. Check the following link: http://www.oracle.com/technetwork/community/developer-vm/index.html

Similar Messages

After Windows 10 Pro N succesfull update all Network Adapters not working and not showing up

Hi all, After succesfully installing the new Windows 10 Pro N onto my Windows 8.1 Pro N operating system and restarting the system, I realized that all drivers are migrated succesfully, withouht any incompatibility issue, but none of the network adapters were working, so no WiFi, no LAN connection was ready to be used, checking the list of available network adapters showed an empty list. I am using a ThinkPad T520 laptop. I have tried to update all drivers from a USB, had several restarts, but no result. Any ideas I could use to get Windows 10 up-n-running with network connections? Thank you in advance, Regards, Gyula

Hello and welcome,
Do you have VPN software on your laptop? https://support.microsoft.com/en-us/kb/3084164
Z.

Re: Is Oracle 11gR2 and 10gR2 BOTH compatible with Oracle Linux 6 Update 1?

Hello,
Required to Install Oracle 11gR2 and 10gR2 Oracle binaries on Oracle Linux 6 Update 1, are both versions compatible to install and run with databases on Oracle Linux Release 6 Update 1 or Oracle Linux Release 5 Update 7 is required for this?
Thanks in advance,
Regards,
A
Edited by: 850391 on Oct 13, 2011 3:43 PM
Edited by: 850391 on Oct 13, 2011 3:44 PM
Edited by: 850391 on Oct 13, 2011 3:44 PM

Hi;
Oracle 11g or 10g is not certified wiht OEL or RHEH6 yet. Please use OEL 5.x version which you can download from edelivery.
Also see:
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
Regard
Helios

ThinkCentre M71e PCIe network card not showing up

I bought a ThinkCentre M71e (3134-C4U) with the intention of using it connected to several separate physical networks. I bought a PCIe Network card (SuperMicro AOC-SG-I2) with two additional network ports to use for this purpose. As far as I can tell, this network card should work with no problems - it's a PCIe 2.0 x4 card, which should work in the system's PCIe 2.0 x16 slot.
However, the computer does not recognize that the network card is there! To test whether it is an issue with the card, I pulled a similar card (known working HP NC360T) from another computer, and this computer did not recognize it either!
What can I do about this? The computer is useless to me without the additional network connection.
I noted that, while the specs explicitly say "PCI Express 2.0 x16", the Hardware Maintenance Manual calls it a "PCI Express x16 graphics slot" (emphasis mine). Does this mean that Lenovo deliberately prevents cards other than graphics cards fro mbeing recognized in this slot?
UPDATE: I see now that someone else had this exact question two years ago, with no response.

There a long thread about this on the 123MacMini forum. At page three, they mention drivers (you need drivers, right?) and there is a link...
http://www.123macmini.com/forums/viewtopic.php?t=22943&postdays=0&postorder=asc& highlight=pcie+sata&start=30
Actually, that thread might refer to a different, but similar, card.
Don't know if it finally worked. Be very interested to hear. (Not sure why Apple is/has always shunned eSATA?)

Oracle Linux Patching/Updates Impact on Oracle Database

I have several questions regarding Oracle Linux patching and its impact on Oracle Database.
3 node Cluster
Operating System: Oracle Linux Release 5 update 2
Kernel: 2.6.18-92.1.22.0.1.el5 x86_64 GNU/Linux
Grid Infrastructure: Oracle Grid Infrastructure 11g Release 2 (11.2.0.2)
Database: Oracle Database 11g Release 2 Enterprise Edition (11.2.0.2) with RAC option
ASM with ASMLib is being used for Data and FRA.
*1)* Given your at Oracle Linux Release 5 update 2, will applying only Security Patches require any changes to ASMLib, Oracle Grid Infrastructure and/or Oracle Database (software binaries, configuration etc.)?
*2)* Given your at Oracle Linux Release 5 update 2, will applying Bug Fixes and Security Patches to Oracle Linux 5 update 2 require any changes to ASMLib, Oracle Grid Infrastructure and/or Oracle Database (software binaries, configuration etc.)?
*3)* Given your updating from Oracle Linux Release 5 update 2 to Oracle Linux Release 5 update 8, will this require any changes to ASMLib, Oracle Grid Infrastructure and/or Oracle Database (software binaries, configuration etc.)?
I would most whole heartedly appreciate if someone could answer the specific questions asked, inline if possible. Our System Administrator is preparing to perform some patching and as the DBA I'd like to be certain what changes I need to prepare for? I also have a single instance database setup with Oracle Restart. I don't know if this impacts the answers above.
Thanks in advance.

How do you plan to apply Oracle Linux security patches? As far as I'm aware the yum security plug-in does not work with the Oracle public yum repository and there is no really feasible way to automate and determine security related patches only, unless you setup Oracle Enterprise Manager Grid Control (11g) or Cloud (12c) and have a subscription to Oracle ULN.
If you upgrade your Oracle Linux to the latest available version using the public yum repository, all patches, including errata will be applied. You cannot apply patches and stay on a specific release version unless you have a subscription and appropriate yum repository access.
As far as I'm aware there are no changes required to your Oracle database or ASM setup and configuration when updating the OS, provided the version of the Oracle database is supported for the specific OS version (ASM features like ADVM/ACFS are kernel version depending). Upgrading from one major release to another, such as upgrading Oracle Linux 5 to Oracle Linux 6 is not supported and will require upgrading the Oracle Database to 11.2.0.3. You can check the Oracle database certification matrix to determine which Oracle database release version is required for which OS version http://docs.oracle.com/cd/E11882_01/relnotes.112/e23558/toc.htm
The relinking of Oracle Database binaries is a common practice when updating the OS. I do not think it is necessary under Linux. Oracle binaries are typically standalone applications, or use Oracle provided libraries, or in some cases use OS shared libraries, which does not require relinking of Oracle binaries. Upgrading the Oracle database software of course requires relinking.
Edited by: Dude on Dec 4, 2012 2:09 PM

My cellular network is not working on my iphone 5 after updating to ios 8.1.2 !! It was working fine on ios 8.1.1and it was not jillbreak or hacked to unlock. I need help, what can I do?

My cellular network is not working on my iphone 5 after updating to ios 8.1.2 !! It was working fine on ios 8.1.1
my phone was not jillbreak or hacked to unlock. i need help, what can I do?

Did you do the Reset Network Settings as I described above?
There is no way to go back. You can try reseating your nanoSIM or replacing it. Or call your cell provider and have them check the provisioning on your phone.
Or Restore your iPhone from your backup in iTunes.

My cellular network is not working on my iphone 5 after updating to ios 8.1.2 !! It was working fine on ios 8.1.1 i need help, what can I do?

My cellular network is not working on my iphone 5 after updating to ios 8.1.2 !!
It was working fine on ios 8.1.1 i need help, what can I do?

I have this problem too - and it is on a BRAND new iPhone 6 - I have definitively tracked the issue to the moment I upgraded to iOS 8.1.2 - and am beyond frustrated. No fix to tell you about, sorry…but you can read my post here if you are into the whole "misery loves company" thing: iOS 8.1.2 Cellular data problem (Definitive - maybe)

When updating itunes from 10.0.1.22 to anything higher, my network card stops working, HELP!

When updating itunes from 10.0.1.22 to anything higher, my network card stops working, HELP!
I have an iPhone 3gs, and a work iPhone 4 on iOS 4.3.3. I want to sych with iTunes but clearly must upgrade to >10.1
When I do, my network card no longer works on my desktop. Please HELP!
My spec is;
NETWORK CARD;

polydorus wrote:
This isn't my thing, but the following post on this seems to have helped some people:
http://discussions.apple.com/thread.jspa?messageID=12622179#12622179
That's the go-to advice with this one, p. (I certainly don't have much to offer beyond it, but it does a superb job in the vast majority of instances.)

In Oracle Linux 6 update 3, a question about Language

Hi, I'm operating Oracle Linux 6 update 3.
I have some question.
After it is booting, We can select various Languages in fisrt login display. So then does it(Oracle Linux 6 update 3 vesrion) support all Languages without installing a Language Packs?
thanks for reading this contens.
If you know about this, plz...inform this.

leave_for wrote:
Hi, I'm operating Oracle Linux 6 update 3.
I have some question.
After it is booting, We can select various Languages in fisrt login display. So then does it(Oracle Linux 6 update 3 vesrion) support all Languages without installing a Language Packs?
thanks for reading this contens.
If you know about this, plz...inform this.At least if you select "desktop" during installation, then the answer is yes. But you have to run the ibus program, log out then log in to complete the process. You only need to run it once.

I have iphone 4 and i used it for a one and half years.i used it in sri lanka and doha qatar,recently i update it i.o.s 7, then it was working.after i.o.s 7.0.3 came i again updeted it and now my phone network is not working.now phone is locked.pls help.

i have iphone 4 and i used it for a one and half years.i used it in sri lanka and doha qatar also..,recently i update it i.o.s 7, then it was working.after i.o.s 7.0.3 came i again updeted it and now my phone network is not working.now phone is locked.pls help.

I am seeing if I can get another battery even though I do not believe that is the issue. It keeps giving me vdd_under which I believe is under voltage, maybe it is just a faulty battery? It charges up like normal and functions normal (when plugged in, or above 90%) but it gives under voltage warnings and shuts down when in heavy use (using camera or going back and forth to imessage). When just sitting idle it doesn't seem to turn off until that 55-60% mark. It may just be a faulty battery because I feel I installed all of the other cables correctly when replacing the screen, and I don't think those connections should affect the battery anyway except for maybe the logic board cable (the 2nd cable to be unplugged after the battery cable) I guess I could clean that out as well with isopropyl just in case.
Any other suggestions would be helpful... and I will get back to you if a new battery helps. Thanks!

My MSI 955X built in networking is not working properly

Hi,
I have many MSI 955X motherboards with the built in Intel Pro1000 and the broadcom 1 GB lan built on board. I have been having trouble
getting these built in lan ports to work. I have updated the mobos bios to the latest. I have installed the latest lan drivers and still they act up.
The network ports seem to take a very long time to copy files from our server etc. a 5 MB file just sits there and says calculating time to copy file then starts copying very slowly. When I don't use the built in lan ports and instead use a pci 10/100 network card I copy fine.
But as soon as I use the built in network ports I get irrattic speed and behavior. It's almost like it can't auto select the speed properly and gets a lot of errors. But when I tell the ports to connect at 100 full instead of autoselect. It doesn't fix the problem. Has anyone else had this problem before. I have noticed it with not just this mobo but with others as well. It appears that the 1 GB technology isn't very compatible with the existing network. It's really very odd as in I've had other 1 GB network cards to work for a long time. Then sometime in the future they don't connect properly. Without changing any of the switches etc.. They just start working irratically. When I replace them with a 10/100 card they work like a champ.
I never had much luck with intel network cards I think they are too complicated and have too many options.
Any help at this point would be much appreciated.

1. Please check whether the cable you are using is right, especially the max speed which the cable supports;
2. Please check like this way: click start/run, then type cmd, after you enter DOS circumstances please type ipconfig/all. Then you may see whether the mac adress is right or not;
3. Please enter you network card property to select the connection type to have a try.

I have an Iphone 4 16gb and updated the IOS 6.1.2. after the update my 3G is not working at all??. can you please suggest what can be done to rectify this problem?

i have an Iphone 4 16gb and updated the IOS 6.1.2. after the update my 3G is not working at all??. can you please suggest what can be done to rectify this problem?

I have the same problem. After updating to 6.1.2 my iPad 3,2 will not find Verizon network. It just says "Searching..." for ever. Any thoughts?

My Iphone 4 network is not working in Malaysia

My Iphone 4 network is not working in Malaysia as I offered for 2 month period by behalf of my company and when buy a sim card in Malaysia then I only realise there were no network and I bring to a shop and they upgraded my Iphone and it stuck on the activation part which require a network. Any Solution ?

iphone 4 and 4S have two microphones...bottom n top...sometimes top microphone is covered by the case or sheet as in my case..and when i just put off the case it was working fine.....i just got problem today and today it is solved again.....may be its ur case or may be ur case is a genuine hardware software problem...just for info

SB04100 Sound Blaster Card not working after computer rebuild

=SB0400 Sound Blaster Card not working after computer rebuildZ I did a full disk format and reinstall for a friend on a Dimension 3000, running XP SP3. There is no sound at all. Speakers are good, tested on another system. Model number on the back of the sound card is SB0400, so I assume this is an older 24 bit PCI SoundBlaster card. Although I reinstalled all drivers from Dell, I found no drivers for this. The Creative site has no listing for this model.
Computer does not seem to recognize the card. Have not opened the box yet but I assume if I were to remove and then reinstall the card it would be recognized (?) I then have to find an SB0400 driver.
Does anyone know where I can find an SB0400 driver ? Does the strategy of pulling and reinstalling the card make sense ? (I have really avoided tampering with any of the hardware on this box -- since it is not mine.)

Re: SB0400 Sound Blaster Card not working after computer rebuild? Thanks much for your response. Problem solved for now. I removed the board and then reinserted it, after which I was able to download the drivers directly. Some of my difficulty with this whole process has been ) I didn't know there was no working speaker in the computer and 2) I apparently misunderstood the BIOS settings for this. I re-set it up as an add-on board during the troubleshooting process. After loading the driver, I went back to the original setting (don't recall what it was but it was for integrated sound). The setting for integrated sound works fine, with external speakers and the new 24 bit driver. Still some noise (popping and static) but this board shares the bus with 2 other cards one of which is a wireless network card. May be a PCI latency issue but I'm reluctant to change that because the network card is a bit shaky anyway.
Everything works for now -- I'll be glad to get this particular computer out of my house !

Wrt610n wireless network does not work after firmeware upgrade

Hi
I just updated my Wrt610n hardware version 1 to the newest firmware, it did finish with sucess, I did factory reset reboot and reconfig. But the wireless network does not work , cant connect computers to it. Did downgrade the firmware to the same it was and restore my settings but still wireless does not work. But router works fine with lan. Any suggestions? maybe the firmware tosted the router?
Regards
Stefan

Update -
After last reset and reupgrade with the newest firmware for hardware version 1 I could config the router and connect 2 computers with wireless - but only for about 15 mín - then they lost connection and could not reconnect.
I did then get the newest update for hardeware version 2 - just to try and upgraded with that and got success, and now I have reset the router again and config it and those 2 computers are connected and have been for 1 hour now. So seems to be working - is it okay to have the firmware for hardware version 2 on my version 1 router?
Any thought what is going on - could it be that the other firmware had not loaded compleytle or?

Oracle Linux 6 update --- wirelees network card not working.

Similar Messages

Maybe you are looking for