Oracle obiee error when online

I have a DSN entry with the name TestEUL and have the repository with proper connections.
When i open the repository offline and check the connections ,its working fine.When i right click on View data it gives me the data.
But when i open repository online and check for view data it gives me an error message as "An error occured while processing the EXECUTE PHYSICAL Statement".Specified driver could not be loaded due to system error 998(Oracle in XE)"
The DSN test connection is working fine
Can you please tell me where am i going wrong?

Have you recently patched/upgraded? This sounds like there might have been a problem relinking the executables / libraries, and/or a permissions problem. For example you may be referencing a 32 bit library with your 64 bit client.
I believe I recently read a similar case - check Metalink for this symptom.
HTH
Regards Nigel

Similar Messages

Oracle Fatal error when trying to connect through sqlplus

Hi,
I am getting the below error when trying to connect to instance through sqlplus
Database version is :10.2.0.3
Operating system= Solaris Operating System (SPARC 64-bit)
OS version=5.10
[lscbd07p2*BMC]-\ORACLE>sqlplus
SQL*Plus: Release 10.1.0.4.0 - Production on Fri Nov 9 07:48:24 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: /as sysdba
ld.so.1: oracle: fatal: relocation error: file /u01/app/oracle/product/db/10.1.0.4/lib/libjox10.so: symbol kststop_: referenced symbol not found
ERROR:
ORA-12547: TNS:lost contact
Enter user-name:
Could you all please give me suggestions in order to solve this problem.
Thanks
Mannu

Have you recently patched/upgraded? This sounds like there might have been a problem relinking the executables / libraries, and/or a permissions problem. For example you may be referencing a 32 bit library with your 64 bit client.
I believe I recently read a similar case - check Metalink for this symptom.
HTH
Regards Nigel

Oracle text error when generating random rows

Hello
firing
SELECT *
FROM
SELECT NAME,EMAIL,ADDRESS1,ADDRESS2,CONTACT_NAME,MOBILE,TELEPHONE FROM MV_CAT_SEG_REG_PROD
WHERE CATSEARCH(CAT_TYPES,'security services*' ,NULL)>0 AND
PLAN_ID=1 AND ACT_STATUS='N'
ORDER BY DBMS_RANDOM.VALUE
where rownum < 4;
returns
ORA-20000: Oracle Text error:
DRG-10849: catsearch does not support functional invocation
DRG-10599: column is not indexed
20000. 00000 - "%s"
*Cause:    The stored procedure 'raise_application_error'
was called which causes this error to be generated.
*Action:   Correct the problem as described in the error message or contact
the application administrator or DBA for more information.
using oracle 10gr2 on windows server 2003
i have tried 1)dropping the index and creating it again, the index type is "CTXSYS"."CTXCAT"
2) deleting the stats -checking
3)recreating the stats- checking
the table here is a materialized view
i need to tell you people that
there are two indexes cat_types_ind and cat_ids_idx on cat_types and cat_ids columns respectively
the inner query uses cat_types_idx index when executed and seen in sqladvisor
1)removing the order by clause will make the query work but i really want that order by clause
2)the inner-query-only works fine
3) i have seen the forums and they have helped regarding the things i tried above but it does not work
please tell me if i need to further elaborate on anything
thanks in advance

I have same problem, my query is:
SELECT *
FROM
(SELECT
/*+ FIRST_ROWS(50) */
NTQ.*,
ROWNUM RNUM1
FROM
(SELECT
/*+ INDEX(DL_TSD_DEFTR_CI) */
FROM ima_ol.DL_TSD_SITUATION s
WHERE (CATSEARCH(DEF_TRANS,'milano ',NULL)>0)
AND (s.FORECAST = 0)
AND (s.STATE IN (1,0,4))
AND (s.ARCH_STATE = 0)
ORDER BY s.VET_TS DESC
) NTQ
WHERE ROWNUM <=50
WHERE RNUM1 >=1
my oracle and system version:
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
PL/SQL Release 11.1.0.7.0 - Production
"CORE     11.1.0.7.0     Production"
TNS for Solaris: Version 11.1.0.7.0 - Production
NLSRTL Version 11.1.0.7.0 - Production
I have suggested that to solve the problem I should alter the statistics of the offending table to force to use this index .. how do I do? thanks in advance

Oracle TNS Error when startng Listener

Guys,
I get the following error when i try to start the listener, any suggestions or inputs would help
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC0)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=xxxx3)(PORT=1522)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL> start
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 9.2.0.6.0 - Production
System parameter file is C:\oracle\ora92\network\admin\listener.ora
Log messages written to C:\oracle\ora92\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC0ipc
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=xxxx3)(PORT=1522)
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
32-bit Windows Error: 49: Unknown error
Below is the listener log
TNSLSNR for 32-bit Windows: Version 9.2.0.6.0 - Production on 02-JUL-2009 15:29:56
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
System parameter file is C:\oracle\ora92\network\admin\listener.ora
Log messages written to C:\oracle\ora92\network\log\listener.log
Trace information written to C:\oracle\ora92\network\trace\listener.trc
Trace level is currently 0
Started with pid=20312
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC0ipc)))
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=xxxxx3)(PORT=1522)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
32-bit Windows Error: 49: Unknown error
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC0ipc)))
TNSLSNR for 32-bit Windows: Version 9.2.0.6.0 - Production on 02-JUL-2009 15:30:11
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
System parameter file is C:\oracle\ora92\network\admin\listener.ora
Log messages written to C:\oracle\ora92\network\log\listener.log
Trace information written to C:\oracle\ora92\network\trace\listener.trc
Trace level is currently 0
Started with pid=19992
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC0ipc)))
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=xxxxx3)(PORT=1522)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
32-bit Windows Error: 49: Unknown error
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC0ipc)))
Listener failed to start. See the error message(s) above...
LSNRCTL>
TNSNAMES.ORA
ORATEST.NV.AMCAD.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.XX)(PORT = 1522))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = OraTest)
LISTENER.ORA
SID_LIST_LISTENER =
(SID_DESC =
(GLOBAL_DBNAME = OraTest)
(ORACLE_HOME = C:\oracle\ora92)
(SID_NAME = Oratest)
SQLNET.ORA
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, ONAMES, HOSTNAME)

ORAAM wrote:
Guys,
I get the following error when i try to start the listener, any suggestions or inputs would help
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC0)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=xxxx3)(PORT=1522)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL> start
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 9.2.0.6.0 - Production
System parameter file is C:\oracle\ora92\network\admin\listener.ora
Log messages written to C:\oracle\ora92\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC0ipc
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=xxxx3)(PORT=1522)
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
32-bit Windows Error: 49: Unknown error
Below is the listener log
TNSLSNR for 32-bit Windows: Version 9.2.0.6.0 - Production on 02-JUL-2009 15:29:56
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
System parameter file is C:\oracle\ora92\network\admin\listener.ora
Log messages written to C:\oracle\ora92\network\log\listener.log
Trace information written to C:\oracle\ora92\network\trace\listener.trc
Trace level is currently 0
Started with pid=20312
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC0ipc)))
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=xxxxx3)(PORT=1522)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
32-bit Windows Error: 49: Unknown error
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC0ipc)))
TNSLSNR for 32-bit Windows: Version 9.2.0.6.0 - Production on 02-JUL-2009 15:30:11
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
System parameter file is C:\oracle\ora92\network\admin\listener.ora
Log messages written to C:\oracle\ora92\network\log\listener.log
Trace information written to C:\oracle\ora92\network\trace\listener.trc
Trace level is currently 0
Started with pid=19992
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC0ipc)))
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=xxxxx3)(PORT=1522)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
32-bit Windows Error: 49: Unknown error
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC0ipc)))
Listener failed to start. See the error message(s) above...
LSNRCTL>
TNSNAMES.ORA
ORATEST.NV.AMCAD.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.XX)(PORT = 1522))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = OraTest)
LISTENER.ORA
SID_LIST_LISTENER =
(SID_DESC =
(GLOBAL_DBNAME = OraTest)
(ORACLE_HOME = C:\oracle\ora92)
(SID_NAME = Oratest)
SQLNET.ORA
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, ONAMES, HOSTNAME)What do you suppose the message "TNS-12545: Connect failed because target host or object does not exist" means?
I don't see the LISTENER = section of your listener.ora file. That's where you tell the listener the host and port to use.
You realize of course, that the listener runs on the server, not the client.
You realize, of course, that tnsnames.ora is a client side file and the listener doesn't care one whit what is in any tnsnames.ora file.

Oracle ODBC error when inserting "end" or "begin"

I think I may have found a bug in the Oracle ODBC driver....
I am using version 8.01.73.00 of the Oracle ODBC driver, and my VB application is trying to insert a record into a table using ADO. All works fine, until the user tries to enter the word "end", or "begin" into any of the text (CLOB) fields. The following code shows how I am doing an insert:
Dim cmd As ADODB.Command
Set cmd = New ADODB.Command
cmd.ActiveConnection = "DSN=Envoy;uid=Envoy;pwd=significance;"
cmd.CommandText = "Insert into Mon_Reading (Creation_User, Creation_Date, Reading_Date, Param_ID, Mon_ID, Value, ApplicableYN, Site_ID, Prev_MEter_Value, MeterResetYN, UOM_ID, LimitsApplicableYN, Lower, Upper, Limit_UOM_ID, ApprovedYN, Comments ) Values ('Matttt', '01-jan-2002', '01-jan-2003', 1, 1, 1., 'Y', 1, 0, 'N', 1, 'N', 0, 0, 0, 'Y', ' end ');"
cmd.CommandType = adCmdText
cmd.Execute , , adExecuteNoRecords
As you can see, the text " end " is being added to the comments field, a CLOB data field. When executed, this causes an Oracle ORA-0911 error (invalid character), and the insert fails.
Heres the weird thing - if you change the word "end" to anything else apart from "begin" - it will work!!! Also, it only fails if you wrap the "end" in spaces?!!?!! Users that reported this were entering comments like "this is the end of June" - this would have caused the error. If you copy teh failed SQL and paste it into SQLPlus, it executes OK.
I can only presume this is an Oracle bug. Anyone else have an ideas? What can I do as a workaround?

First thought would be to grab the updated 8.1.7.x ODBC driver (8.1.7.7 IIRC). Perhaps this problem has already been solved.
Justin

Oracle / JDBC Error when Returning values from an Insert

I have a (oracle) table with a auto-incrementing id. From time to time I want to insert rows to this table, but want to be able to know what the pk of the newly inserted row is. One way I could do this is:
SQL> variable var1 number;
SQL> insert into test (name) values ('test value') returning id into :var1;
1 row created.
SQL> print var1;
13
As best as I can write it, that in java should be:
String query = "insert into test (name) values ('test') returning id into :var1";
OracleCallableStatement cs = (OracleCallableStatement) conn.prepareCall(query);
cs.registerOutParameter(1, OracleTypes.NUMBER );
cs.execute();
System.out.println(cs.getInt(1));
The problem is that when I run it, I get an error:
java.sql.SQLException: Protocol violation
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:208)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:764)
     at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:215)
     at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:954)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1168)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3285)
     at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3390)
     at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4223)
     at restitution.shared.Sandbox2.run(Sandbox2.java:25)
     at restitution.shared.Sandbox2.main(Sandbox2.java:11)
According to their website, this is (yet another) bug:
What does "Protocol Violation" mean?
The Thin driver throws this exception when it reads something from the RDBMS that it did not expect. This means that the protocol engine in the Thin driver and the protocol engine in the RDBMS are out of synch. There is no way to recover from this error. The connection is dead. You should try to close it, but that will probably fail too.
If you get a reproducible test case that generates this error, please file a TAR with Oracle Global Support. Be sure to specify the exact version numbers of the JDBC driver and the RDBMS, including any patches.
Can someone tell me what I'm doing wrong? Is there any other ways to do a insert / get key in one sql query ?

I tried your solution, but it didn't work. I get an error (incorrect column number):
Caused by: java.sql.SQLException: Niepoprawny indeks kolumny
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:208)
at oracle.jdbc.driver.OracleCallableStatement.registerOutParameterInternal(OracleCallableStatement.java:121)
at oracle.jdbc.driver.OracleCallableStatement.registerOutParameter(OracleCallableStatement.java:283)
at oracle.jdbc.driver.OracleCallableStatement.registerOutParameter(OracleCallableStatement.java:363)
at (...).Row$1.createCallableStatement(Row.java:82)
at org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java:836)
... 69 more
The code is following:
                    String query = "BEGIN insert into movement (doc_number) values ('abc') returning id into :?; END;";
                    OracleCallableStatement cs = (OracleCallableStatement) c.prepareCall(query);
                    cs.registerOutParameter(1, OracleTypes.NUMBER);
                    cs.execute();
                    LOG.debug("result:"+ cs.getInt(1));
I used Oracle database 10.2.0.1 with jdbc thin driver ojdbc14.jar. Could you point out your configuration?
Regards,
Rafal Rusin
www.mimuw.edu.pl/~rrusin

Oracle 1031 error when starting DB

Hello,
We are experiencing a very strange Oracle issue. We are installing new instances on Oracle 10.2.0.4 on Windows 2008 (2008 new to us). When we attempt to logon to Oracle sqlplus /nolog, connect /as sysdb, startup, we are greeted by and ora-01031 -- which is usually a fairly easy fix. We found that when we enter 'startup' and the second time, we get the same error -1031. But, when we do startup a third time, the db starts up normally. I having problems finding oracle tools/traces/logs that log before the db is started. I have ran a network sniffer, and absolutely nothing was happening (network wise) after startup command is issued. The DB is stable at this point. And in fact we can do anything during this session. If we log off of the server and then back on, the connection is strange again and we have to enter commands three times again before we get a correct response. This is a problem during sap install as the sapinst is logging off and on through its script and starting and stopping the db. Any help/response/anything would be greatly appreciated.
--Jack

Thanks for your suggestions; however, the problem still exists. Remember the problem is odd in that upon the third connection attempt, the connection is successful.
-- The sqlnet.ora file already exists and it includes the line you specified.
-- When I run r3trans -d, I get:
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED." r3trans finished (0012)
I will look this up, but figure that it is likely a generic message.
I will look at the suggested notes.
The account is included in all of the groups mentioned.
Any further help, ideas, etc. would be greatly appreciated. I cannot (for the life of me) figure out how to increase loggin in Oracle to capture this failure to connect (like in the oracle alert log)...
--Jack

OraOLEDB.Oracle generates error when retreiving a table with anydata col

Hi,
I use OraOLEDB.Oracle to connect from VB6 to oracle, and ADODB recordsets.
I have a procedure that returns a table (using a cursor), the table has a column of type sys.anydata.
I get this error: ROW-00004: Invalid column datatype
I have to mention that it works excelent for anything that does not contain sys.anydata.
I use Oracle 9.2.
Thanks in advance,
pesq

I tried your solution, but it didn't work. I get an error (incorrect column number):
Caused by: java.sql.SQLException: Niepoprawny indeks kolumny
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:208)
at oracle.jdbc.driver.OracleCallableStatement.registerOutParameterInternal(OracleCallableStatement.java:121)
at oracle.jdbc.driver.OracleCallableStatement.registerOutParameter(OracleCallableStatement.java:283)
at oracle.jdbc.driver.OracleCallableStatement.registerOutParameter(OracleCallableStatement.java:363)
at (...).Row$1.createCallableStatement(Row.java:82)
at org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java:836)
... 69 more
The code is following:
                    String query = "BEGIN insert into movement (doc_number) values ('abc') returning id into :?; END;";
                    OracleCallableStatement cs = (OracleCallableStatement) c.prepareCall(query);
                    cs.registerOutParameter(1, OracleTypes.NUMBER);
                    cs.execute();
                    LOG.debug("result:"+ cs.getInt(1));
I used Oracle database 10.2.0.1 with jdbc thin driver ojdbc14.jar. Could you point out your configuration?
Regards,
Rafal Rusin
www.mimuw.edu.pl/~rrusin

Strange oracle lite error when create db

i am new to oracle lite and been playing about but this error really confuses me
C:\>createdb mydb mydb doug
Oracle Lite CREATEDB Version 10.2.0.1.0.
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Database C:\ORACLE\10GLITE\MOBILE\SDK\OLDB40\MYDB.odb created (VolID = 507).
C:\>msql system/doug@jdbc:polite:mydb
Oracle Lite MSQL Version 10.2.0.1.0
Copyright (c) 1997, 2005, Oracle. All rights reserved.
[POL-3023] the database does not exist
so it says it creates the db fine but wont let me connect

Check whether there is a corresponding entry made for that DSN in your odbc.ini
If no, make an entry in that file and then try connecting.
Minimally it should consist of something like this... ( for createdb oracle oracle oracle)
[ODBC 32 bit Data Sources]
oracle=Oracle Lite 40 ODBC Driver (32 bit)
[oracle]
Description=Oracle Lite 40 Data Source
DataDirectory=/private/orainst/MDK/mobile/sdk/oldb40
Database=oracle
-vv
null

Borland VisiBroker for java meet error when Installed Oracle 8i(V8.1.6)

Oracle modified some register key value of Java Runtime
Evironment which result in Java2IDL.exe's runninng error. I
fixed the value in /software/javasoft/java runtime environment
and reset the currentversion key to 1.3. Oralce use jre1.1.7.
Can oracle meet errors when change it to sun jre1.3.1? May
upgrade oracle jre1.1.7 to high version ? Tell me how to. Please
tell me where to download If Oracle can't use Sun JRE1.3 . How
can I deal with this problem and let VisiBroker for java and
VisiBroker for C++ work well?
Best Regards

Hi,
I am not aware of a sqlplus v8 for macosx so the nonexistence of it might be your problem. The way I remember it, there are sqlnet libs that are usable from other apps. What you could do is install the v9.2 developers release. This contains sqlplus and in that case just make sure the directory containing sqlplus is in your PATH (you also need a few other environment variables; they are set in DBENV).
Ronald.
http://ronr.nl/unix-dba

Oracle bi error codes u9kp7q94 OBIEE 10g

Hi All,
I have created new user in RPD(Online Mode).
Then i have loged into Answer.It throws error
"oracle bi error codes u9kp7q94 OBIEE 10g"
How to fix.
Thanks
Gram

Raj wrote:
Hi All,
I have created new user in RPD(Online Mode).
Then i have loged into Answer.It throws error
"oracle bi error codes u9kp7q94 OBIEE 10g"
How to fix.
Thanks
GramAre you getting this error on the login screen? or when you are opening a report?

Getting Error when creating Data Model off OBIEE Analysis

Hi,
Our BI Publisher is integrated with OBIEE. I am developing BI Publisher report from existing obiee analysis. I am getting error when selecting existing analysis for data Set. Following error gets appear when pressing ok after selecting BI analysis
oracle.xdo.XDOException: oracle.xdo.XDOException: oracle.xml.parser.v2.XMLParseException: '=' missing in attribute.
I have done some debugging and it seems error is appearing due to presence of dimensional hierarchy in the analysis. If I remove dimensional hierarchy column from the analysis, this error goes away and I am able to save data model and gather sample XML.
Any idea how to handle dimensional hierarchy column in BI Publisher data set?
Thanks & Regards

Hi,
I got this response from Oracle
“Sorry, this is not supported. If the BIEE Analysis has hierarchy columns then BIP cannot use it as a datasource.”

Error when upgrade Oracle client 9.2.0.5.0 to 9.2.0.5.3

Hi all,
I'm new with Oracle community so I hope you guys can help me and give me some suggestion with my case.
I got an error when upgrade Oracle client 9.2.0.5.0 to 9.2.0.5.3
I tried many times but can’t do upgrade successfully
This the error message I got when doing the job:
[ http://picasaweb.google.com/hoagao84/Oracle#5443442931867670386]
Appreciate your help.
Log files:
Command arguments are: apply
OPatch version is: 1.0.0.0.48
Using ORACLE_HOME/oui to look up oui libs...
Oracle Home = d:\oracle\ora92
Location of Oracle Inventory = D:\oracle\ora92\inventory
Oracle Universal Installer shared library = D:\oracle\ora92\oui\lib\win32\oraInstaller.dll
Path to Java = "D:\oracle\ora92\jdk\jre\bin\java.exe"
Location of Oracle Inventory Pointer = N/A
Location of Oracle Universal Installer components = D:\oracle\ora92\oui
Required Jar File under Oracle Universal Installer = jlib\OraInstaller.jar
Checking if this is a RAC system...
Accessing inventory... This may take up to 300 seconds.
(retry 10 times, delay 30 seconds each time)
System Command: ""D:\oracle\ora92\jdk\jre\bin\java.exe" -Dopatch.retry=10 -Dopatch.delay=30 -classpath "D:\oracle\ora92\oui\jlib\OraInstaller.jar;D:\oracle\ora92\oui\jlib\srvm.jar;D:\oracle\ora92\opatch\jlib\opatch.jar;D:\oracle\ora92\oui\jlib\xmlparserv2.jar;D:\oracle\ora92\oui\jlib\share.jar;.:D:\oracle\ora92\jlib\srvm.jar" opatch/O2O "d:\oracle\ora92" "D:\oracle\ora92\oui" opatch.pl 1.0.0.0.48"
Result:
output to OPatch:
IS_CLUSTER=0
CHECK_CLUSTER=1
NODE_LIST=NULL
NODE_COUNT=0
LOCAL_NODE=NULL
IS_CFS=0
RAC_CODE=0
HOME_INDEX=1
This is not a RAC system
Interim Patch ID: 3738339
Checking the patch inventory.
Component Name: oracle.rdbms
Component Version: 9.2.0.5.0
Component Name: oracle.rsf.rdbms_rsf
Component Version: 9.2.0.5.0
Component Name: oracle.rsf.oracore_rsf
Component Version: 9.2.0.5.0
Component Name: oracle.rsf.xdk_rsf
Component Version: 9.2.0.5.0
Component Name: oracle.rsf.dbjava_rsf
Component Version: 9.2.0.5.0
Component Name: oracle.java.javavm.javatools
Component Version: 9.2.0.5.0
Component Name: oracle.cartridges.context
Component Version: 9.2.0.5.0
Component Name: oracle.cartridges.locator
Component Version: 9.2.0.5.0
Component Name: oracle.rsf.net_rsf
Component Version: 9.2.0.5.0
Component Name: oracle.rsf.ldap_rsf
Component Version: 9.2.0.5.0
Component Name: oracle.emprod.oemagent.base_oemagent
Component Version: 9.2.0.5.0
Component Name: oracle.isearch.is_common
Component Version: 9.2.0.5.0
Component Name: oracle.options.olap.cwmlite
Component Version: 9.2.0.5.0
Component Name: oracle.rsf.nlsrtl_rsf
Component Version: 9.2.0.5.0
Bugs fixed by this patch 3738339:
3741539 : LOGICAL STANDBY FAILS ORA-1422 MERGING PARTITIONS WITH LOB COLUMN
2800494 : KCBZIB XHINT FORCES SINGLE BLOCK READS INADVERTENTLY FOR SINGLE INSTANCE
3239873 : EXTREMELY HIGH PARSING TIMES WITH AND BETWEEN IN ORACLE 9.2.0
2918138 : ORA-600 (KOHDTF048) WHEN USING PIPELINED PL/SQL TABLE FUNCTIONS
3575743 : 2004-S144E
3554319 : APPSST; ORA-00600 [KQLUDP2] RUN DURING APPS UPGRADE
3666502 : ORA-00600 [1236] RANDOMLY OCCURING
3752406 : MERGE LABEL REQUEST ON TOP OF 9.2.0.5 FOR BUGS LISTED BELOW
3528282 : 2004S075E
3412818 : REPEATED MESSAGES IN LGWR TRACE
2690205 : 2003-S190E
3543125 : 2004-S089E
3571233 : 2004-S141E
3458446 : 2004S059E
2810394 : LNXN2PD RETURNS SCALE OF 42 WHEN COVERTING ORACLE NUMBER 0. TO PACKED
3323435 : 2003-S126E
3356103 : ORA-600 [OPIBND0; OACCSID] IN PARALLEL QUERY SERVER P001 EXECUTING OLAP QUERY
3668224 : CBO CALCULATE LOWER CMPTD CDN AND LEADS TO BAD EXECUTION PLAN.
3492040 : ORA-600 [KGHFRF1] SELECTING FROM V$LOGMNR_CONTENTS
3150750 : SM; (DBMS_STATS/AUTO_SAMPLE_SIZE) ESTIMATED NDV IS WRONG WITH HIGH SKEWS
3566469 : 2004-S138E
3320622 : 2003-S191E
3749394 : SCORE() FOR FUZZY TEXT OPERATOR DIFFERENT FOR FUNCTIONAL VERSUS INDEX ACCESS
3609791 : PSR 9.2.0.5.0 BREAKS CALL DB2 STORED PROCEDURE WITH DECIMAL PARM. SQLCODE -310
3698501 : CGS/IMR GENERATES SAME SEQ/INCARNATION NUMBER AFTER RECONFIG
3668572 : ORA-979 WHEN CURSOR_SHARING=FORCE OR SIMILAR
3179637 : UNABLE TO CREATE AN ORACLECONTEXT ON AD UNDER A CHILD DOMAIN
3571226 : 2004-S140E
3240280 : JOBS SUDDENLY STOP ALTHOUGH NEXT_DATE <= SYSDATE
2964252 : LPX-00252 WHEN PARSING VALID XML / DTD FILE
3617519 : TRANSFORMATION FAILING WITH ORA-932 INCONSISTENT DATATYPE
3172282 : ORACLE CORE DUMPS WHEN TRY TO LIST ALL ACES FOR A SPECIFIC ACL
3637624 : WRONG RESULTS WITH DISTINCT COUNT AND UNNESTED EXISTS SUBQUERY
3542588 : SAME EVENT 38041 USED FOR BUG FIXES 3444115 AND 3131551
3358490 : ORA-00600 [KQSCCCK;1],[],[],[],[],[],[],[]
3177513 : WRONG PLAN - JOIN NOT AVOIDED USING BITMAP JOIN INDEX IF UNIQUE INDEX TOO
3509265 : SHUTDOWN DID NOT COMPLETE WITH WAITING FOR INSTANCES TO LEAVE; 2
3516951 : BAD EXECUTION PLAN WITH MERGE JOIN CARTESIAN IN TEMP TABLE
2954891 : ORA-600 KJMXMPM;DIFFUS], [990307644], [990307644], [3304659678]
3388633 : LOGICAL STANDBY APPLY STOPPED WITH ORA-00600; [17090]
3371796 : EXPLAIN PLAN HANGS ON KKORMINL
3622875 : ORA-1499 AND ANALYZE TABLE VALIDATE STRUCTURE CASCADE ONLINE
3412136 : BAD EXECUTION WITH MERGE JOIN CARTESIAN IN ORACLE 9.2.0.4 AND MERGEFIX 3363655
3540576 : 2004-S083E
3575747 : 2004-S145E
3566813 : CTAS WITH UNION ALL AND ORDER BY RESULTS IN ORA-3113
3811906 : MERGE LABEL REQUEST ON TOP OF 9.2.0.5
2824035 : FXD; ORA-22921 CAUSING 4 DIFS IN LRGXG2.
3354470 : 2003-S195E
3518909 : UGA MEMORY NOT RELEASED AFTER USING XMLPARSER
3617042 : BAD PLAN FOR SCH-XMLTYPE BASED WITH COLLECTIONS MAPPED TO OCT
3583686 : MEMORY ALLOCATION ERROR DURING SPATIAL QUERY
3597640 : MERGE LABEL REQUEST ON TOP OF 9.2.0.5.0
3559212 : WRONG RESULTS RETURNED WITH 9.2.0.4 AND CBO
3625370 : CGS/IMR RECONFIGURATION GOT HUNG DURING A NEW MEMBER JOINING
3475932 : CROSS INSTANCE ARCHIVE LOG NOT GENERATED REMOTELY
3635177 : PSRC; ORA-7445 [KXCCUIN] POSSIBLE FROM DML
3430832 : ORA-600 [25012] AFTER CREATE OF INDEX ONLINE PARALLEL ON PART TABLE
2338704 : FXD; 1; QUERIES ON COLLECTIONS STORED IN OUT-OF-LINE TABLES ARE NOT VIEW MERGED
3253770 : 9I-GSI-CRITICAL PROGRAMS TIME OUT WAITING FOR LIBRARY CACHE PIN
Reading patch XML files and doing sanity checks.
Read the command to action file map.
Performing initial safety check.
Checking active processes:
Accessing inventory... This may take up to 300 seconds.
(retry 10 times, delay 30 seconds each time)
System Command: ""D:\oracle\ora92\jdk\jre\bin\java.exe" -Dopatch.retry=10 -Dopatch.delay=30 -classpath "D:\oracle\ora92\oui\jlib\OraInstaller.jar;D:\oracle\ora92\oui\jlib\srvm.jar;D:\oracle\ora92\opatch\jlib\opatch.jar;D:\oracle\ora92\oui\jlib\xmlparserv2.jar;D:\oracle\ora92\oui\jlib\share.jar;." opatch/CheckConflict "D:\oracle\ora92\oui" "d:\oracle\ora92" opatch.pl 1.0.0.0.48 3738339 "3253770 2338704 3430832 3635177 3475932 3625370 3559212 3597640 3583686 3617042 3518909 3354470 2824035 3811906 3566813 3575747 3540576 3412136 3622875 3371796 3388633 2954891 3516951 3509265 3177513 3358490 3542588 3637624 3172282 3617519 2964252 3240280 3571226 3179637 3668572 3698501 3609791 3749394 3320622 3566469 3150750 3492040 3668224 3356103 3323435 2810394 3458446 3571233 3543125 2690205 3412818 3528282 3752406 3666502 3554319 3575743 2918138 3239873 2800494 3741539 " C:\TEMP\patch92053\3738339\etc\config\actions"
Result:
d:\oracle\ora92\opatch\opatch.pl version: 1.0.0.0.48
Copyright (c) 2001,2002,2003 Oracle Corporation. All Rights Reserved.
Error in executing Java program to check conflict
ERROR: OPatch failed during pre-reqs check.

This is all the message when I run command in CMD prompt.
C:\temp\patch92053\3738339\perl d:\oracle\ora92\opatch\opatch.pl apply
Opatch Version 1.0.0.0.48
Perl Version 5.008007
Oracle Home = d:\oracle\ora92
Location of Oracle Inventory = D:\oracle\ora92\inventory
Oracle Universal Installer shared library = D:\Oracle\ora92\oui\lib\win32\oraInstaller.dll
Path to Java = "D:\oracle\ora92\jdk\jre\bin\java.exe"
Location of oracle Inventory Pointer = N/A
Location of Oracle Universal Installer components = D:\Oracle\ora92\oui
Require Jar File under Oracle Universal Installer = jlib\OraInstaller.jar
The filename, directory name, or volume label syntax is incorrect.
D:\oracle\ora92\opatch\opatch.pl version 1.0.0.48
Copyright (c) 2001,2002,2003 Oracle Corporation. All Rights Reserved
Error in executing Java program to check conflict
Error: Opatch failed during pre-reqs check.

HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome

HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome. Extra large font sizes and weird formatting issues only when printing emails from Gmail within Chrome. No problems when printing the same email from Gmail+Internet Exolorer or Thunderbird. Using the IE Tab extension in Chrome prints the email correctly but the style of Gmail's message window is completely weird ie: formatting bar is spread out vertically instead of horizontally. I believe it is clear that this is an application specific issue between the HP LASERJET CP1525nw printer and Google Chrome + Gmail. This printing scenario does not occur when printing anything else or when printing via another printer. I would appreciate receiving any suggestions to solve this issue.
OS: Windows 7 Ultimate x64
Browser: Google Chrome 15
HP Print driver: HP Universal Print Driver for Windows PCL6 v5.4.0
Printer is connected by WiFi to 4 computers

Hi AbZu,
You need to contact Google Chromes technical support as this is only an issue with Chrome. You have indicated that the printer functions correctly everywhere else. Check out the link below for Google Chrome technical support. Let me know if you need additional assistance?
http://support.google.com/chrome/?hl=en
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Error when installing oracle 10g on OEL4..(oracle enterprise linux )

Hi everyone,
i am getting this error when i run ./runInstaller
[oracle@localhost database]$ ./runInstaller
./runInstaller: line 52: /root/Desktop/10201_database_linux32/database/install/.oui: Permission denied
But it has all the permissions (read,write,execute) for owner,groups,others.Do i have to give any more permissions.
File owner of that file : oracle
file group: oinstall
i used the following commands when i created the groups.
/usr/bin/groupadd oinstall
/usr/bin/groupadd dba
/usr/bin/ useradd-m-g oinstall -G dba oracle
what more permissions do i have to give to that ./runInstaller.
please helpme
sandeep

hi everyone,
Please help me.I am not able to figure out what am i doing wrong.I am getting the permission denied error when i am running the ./runinstaller.But it has all the read,write execute permissions
[root@localhost ~]# ls -ltr
total 120
-rw-r--r-- 1 root root 32283 Jan 3 18:36 install.log.syslog
-rw-r--r-- 1 root root 57519 Jan 3 18:36 install.log
-rw-r--r-- 1 root root 1446 Jan 3 18:36 anaconda-ks.cfg
drwxrwxrwx 3 oracle oinstall 4096 Jan 3 21:40 Desktop
[root@localhost ~]# su oracle
[oracle@localhost root]$ ls -ltr
ls: .: Permission denied
[oracle@localhost root]$ cd Desktop
bash: cd: Desktop: Permission denied
[oracle@localhost root]$ exit
[root@localhost ~]# cd Desktop
[root@localhost Desktop]# su oracle
[oracle@localhost Desktop]$ ls
10201_database_linux32
[oracle@localhost Desktop]$ ls -ltr
total 8
drwxrwxrwx 3 oracle oinstall 4096 Jan 3 21:38 10201_database_linux32
[oracle@localhost Desktop]$ cd 10201_database_linux32/
[oracle@localhost 10201_database_linux32]$ cd database/
[oracle@localhost database]$ ls -ltr
total 52
drwxrwxrwx 9 oracle oinstall 4096 Jan 3 21:38 doc
-rwxrwxrwx 1 oracle oinstall 1327 Jan 3 21:38 runInstaller
drwxrwxrwx 2 oracle oinstall 4096 Jan 3 21:38 response
drwxrwxrwx 5 oracle oinstall 4096 Jan 3 21:38 install
-rwxrwxrwx 1 oracle oinstall 5213 Jan 3 21:40 welcome.html
drwxrwxrwx 9 oracle oinstall 4096 Jan 3 21:40 stage
[oracle@localhost database]$ ./runInstaller
./runInstaller: line 52: /root/Desktop/10201_database_linux32/database/install/.oui: Permission denied
Please tell me what shall i do to run the installer.pleaseeeeee
thanks
sandeep

Oracle obiee error when online

Similar Messages

Maybe you are looking for