Oracle OLE DB Provider for 8.0.5

Does anyone know where I can find Oracle's OLE DB Provider that is compatible with 8.0.5 ?
We are converting the front-end of an application to ASP, and the Microsoft driver doesn't allow PL/SQL functions to be executed directly, which will cause a major headache as this is how most of the back-end is written!
Any help much appreciated,
G

Key here is multiple Oracle homes. You can install different Oracle versions in different Oracle homes and use a particular Oracle home based on your application requirement. You should not install 8i client in a 8.0.x Oracle home. Please refer to Oracle documentation on multiple Oracle homes feature.

Similar Messages

Unable to download ORACLE OLE DB provider 8.1.7.3

I can not connect to web18-115.us.oracle.com to download the oracle ole db provider for 8.1.7.3.
Is this down?
I need this ASAP.

oh ... I forgot to say ..
when I run query under Enterprise Manager as
select * from Openquery (db, 'select * from table')
then it will show me a pop-up message
"Query Designer encountered a MS Design Tools error:
ODBC error: [Microsoft][ODBC SQL Server Driver][SQL Server]OLE DB provider 'OraOLEDB.Oracle' reported an error.
[Microsoft][ODBC SQL server Driver][SQL Server][OLE/DB provider returned message: ORA-12545: Connect failed because target host or object does not exist]
And I follow support.microsoft.com/support/complus/mtsandoracle.asp?SD=GN&LN=EN-US&gssnb=1,setting as follow
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSDTC\MTxOCI]
"OracleXaLib"="oraclient8.dll"
"OracleSqlLib"="orasql8.dll"
"OracleOciLib"="oci.dll"

Microsoft OLE DB Provider for Oracle: Data type is not supported.

I got the error:
Microsoft OLE DB Provider for Oracle: Data type is not supported.
Shortly after upgrading from Oracle 8 to Oracle 9. I was advised to download more up to date oracle drivers, but I was wondering if there was a way to tell what version of the 'OLE DB Provider for Oracle' is already at. Is there a command I can use via SQL Plus or something?

I have found Microsoft ODBC for Oracle to be more stable than the Microsoft OLEDB for Oracle driver. I have also found both Microsoft ODBC and OLEDB drivers to be more stable than the drivers from Oracle.
You could always get the latest MDAC (Microsoft Data Access Components) from Microsoft's MSDN Download site and then get the ODAC (Oracle Data Access Components) from Oracle's OTN Download site. ODAC requires MDAC. And ODAC has the latest drivers.
I suppose it would help to have the latest patches for your Oracle client software too. Maybe Oracle MetaLink would have these?
It may even help to have the latest service pack for Visual Studio 6 (Visual C++ 6 and Visual Basic 6) too.

Problem "The OLE DB provider for linked server reported an error. The provider reported an unexpected catastrophic failure Cannot fetch a row from OLE DB provider for linked server"

hi
i'd like to ask question about linked server.
my linked server used to work but now when i try to select from linked server i was told "The OLE DB provider for linked server reported an error. The provider reported an unexpected catastrophic failure Cannot fetch a row from OLE DB provider
for linked server"
but in fact for test connection i was told "the test connection to the linked server succeeded".
could anyone help me? thank u very much
best regards
martin

Hi,
In addition to Tracy's post we have to know those answers as well:
* what provider are you using for the connection
* what do you connect to
for example, if someone try to connect to oracle using sql server provider then several simple queries are going to work probably OK, but once you are trying to use T-SQL or any complex SQL query then the errors are starting.
please post the connection string (without the password!) + the query that you are trying to use.
[Personal Site] [Blog] [Facebook]

Microsoft OLE DB Provider for ODBC Drivers error '80040e10'

Getting the following error:
Microsoft OLE DB Provider for ODBC Drivers error '80040e10'
[Microsoft][ODBC driver for Oracle]Wrong number of parameters
I have a Stored Procedure within a package that has no input parameter and 2 output parameters..
oConnEngineer.CursorLocation = 3
     oConnEngineer.Open sConnectionString
     oCmdEngineer.ActiveConnection = oConnEngineer
     oCmdEngineer.CommandText = "{Call ENG_TAILORMADE.USER_PKG.GET_ENGINEER_LIST(?,{resultset 100, out_ENGINEER_ID, out_ENGINEER_NAME})}"
     oCmdEngineer.CommandType = 1
     Set rsEngineers = oCmdEngineer.Execute()
Any suggestions?

Getting the following error:
Microsoft OLE DB Provider for ODBC Drivers error '80040e10'
[Microsoft][ODBC driver for Oracle]Wrong number of parameters
I have a Stored Procedure within a package that has no input parameter and 2 output parameters..
oConnEngineer.CursorLocation = 3
     oConnEngineer.Open sConnectionString
     oCmdEngineer.ActiveConnection = oConnEngineer
     oCmdEngineer.CommandText = "{Call ENG_TAILORMADE.USER_PKG.GET_ENGINEER_LIST(?,{resultset 100, out_ENGINEER_ID, out_ENGINEER_NAME})}"
     oCmdEngineer.CommandType = 1
     Set rsEngineers = oCmdEngineer.Execute()
Any suggestions?

Append hint + Oracle Ole DB Provider

Hi everybody!
This is my first post here in this great forum! ;-)
I have a problem using Append hint with Oracle OleDB Provider and I've been searching internet for an answer without any luck.
I'm trying to use Append hint with ADO + Oracle OleDB Provider (OraOLEDB.Oracle.1), like in the SQL below:
INSERT /*+APPEND*/
INTO my_table(field1, field2, field3)
SELECT 0 field1, v.field2, v.field3)
FROM my_second_table v
The problem: Oracle is still creting log for this INSERT (It is working like there was no Append hint).
If I use the same SQL statement with Microsoft Ole DB Provider for Oracle, the Append hint works as expected (log is not created), but doesn't work at all with Oracle DB Provider.
Trace shows me that the SQL sentence is ok (the append hint is there!).
I've tried Oracle servers 9.2 and/or 10g, and the problem is the same.
Question: Does Append hint work with Oracle OleDB Provider? If yes, why it is not working? Something related with connection properties?
Any help will be much appreciated!
Thanks in advance.
Alexandre Machado

Hi everybody!
This is my first post here in this great forum! ;-)
I have a problem using Append hint with Oracle OleDB Provider and I've been searching internet for an answer without any luck.
I'm trying to use Append hint with ADO + Oracle OleDB Provider (OraOLEDB.Oracle.1), like in the SQL below:
INSERT /*+APPEND*/
INTO my_table(field1, field2, field3)
SELECT 0 field1, v.field2, v.field3)
FROM my_second_table v
The problem: Oracle is still creting log for this INSERT (It is working like there was no Append hint).
If I use the same SQL statement with Microsoft Ole DB Provider for Oracle, the Append hint works as expected (log is not created), but doesn't work at all with Oracle DB Provider.
Trace shows me that the SQL sentence is ok (the append hint is there!).
I've tried Oracle servers 9.2 and/or 10g, and the problem is the same.
Question: Does Append hint work with Oracle OleDB Provider? If yes, why it is not working? Something related with connection properties?
Any help will be much appreciated!
Thanks in advance.
Alexandre Machado

How deploy Oracle OLE DB Provider?

What information is available to enable one to set up a simple deployment scenario for a Delphi 6.0 program that
utilizes the Oracle OLE DB Provider? (What DLL files are needed, what [if any] registry settings must be made,
what configuration files are needed, etc..) It is not viable to expect the end user to download the 45 MB file from
the Oracle site in order to obtain the functionality of the Oracle OLE DB Provider.
Thanks for your help!
Dave Eland
[email protected]

Put the Oracle Installation CD on the network and then install the Client version of Oracle to everyone's pc.
I know there are deployment wizards for VB and VC++ but this is the best i think as there are lots of dll's and it gets messy.
They will also need the tnsnames.ora entry.
Make sure you have the right licensing agreement with Oracle.

Download Oracle OLE DB Provider

Hello!
I cannot download Oracle OLE DB Provider
http://www.oracle.com/technology/software/tech/windows/ole_db/htdocs/utilsoft.htm
I get the message: "We're sorry, the page you requested was not found. "
I have tried with serveral versions (but I want to have one for version 10)
Do anyone know where else I can find this provider.
Best regards,
Tina

http://edelivery.oracle.com
Regards
Asif Kabir

Oracle OLE DB Provider installation failed...

I downloaded ODAC101040.exe (Oracle OLE DB Provider setup) from following link.
http://www.oracle.com/technetwork/database/windows/utilsoft-088126.html
My OS is Windows 7 Home Premium.
But during installation, am getting error "Abnormal Program Termination" "Unknown Unknown".
Please help, if there is a workaround please let me know.

My OS is Windows 7 Home Premium.Be aware that normally no Oracle products are certified for any Windows Home editions.
BTW, did you read installation instructions from your link ?

Oracle OLE DB Provider / Stored Procedure REF CURSOR errror

Post Author: robfurrball
CA Forum: Data Connectivity and SQL
All,I'm out of ideas on this and would appreciate any suggestions.I'm trying to use Crystal XI to connect to an Oracle 9i database using the Oracle OLE DB Provider (required to use this provider by a 3rd party program that fires off the report).If I connect using the Microsoft OLE DB Provider for Oracle, the report will return data. When connecting with the Oracle OLE DB Provider, I get the following:Database Connector Error: 'ADO Error Code: 0x80040e14
Source: OraOLEDB
Description: ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'SP_MOMGLOBCSHBAL_TEST'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
Native Error: 6550 [Database Vendor Code: 6550 ]' -
The procedure's only parameter is an IN OUT SYS_REFCURSOR, and the Oracle OLE DB Provider is version 9.2.0.7.0 Thanks,Rob

Post Author: robfurrball
CA Forum: Data Connectivity and SQL
Summary: After going
back and forth with Business Objects support they ruled that it was an issue
with the provider itself, recommended I contact Oracle for resolution, and
closed the case before I could comment back to them. I was unable to send this response to their
support team, so I'm posting it here in hopes that I can save others time/money
in the future.
My Response -
I appreciate your input and would have liked to comment further on the case management system before you closed the case. I'm a little surprised and disappointed that you recommend I contact Oracle directly about this issue.I would imagine that a company as large as Business Objects would have much better results dealing with Oracle to resolve an issue compared to an individual.Also, since you are able to connect to other objects (such as a table) in Crystal Reports using that provider, I would expect that you would want customers to be able to connect to stored procedures using it as well. Otherwise, it would seem appropriate to either alert customers of this defect through documentation, public message boards, and forums.Using Crystal to pull data from stored procedures in other databases and data providers made me think that was a viable option for this project. Since it was not documented as a limitation of Crystal and the provider, it has cost my organization a great deal of time and money trying to troubleshoot an issue I would have expected to be caught in Crystal Reports' internal quality assurance testing.------ This is the final note I received on my support case: -
Please note that the statement used to execute a procedure within ODBC/OLE DB is different from the native 'Oracle Server' statement.In ODBC or OLE DB, the call is '{CALL "SCHEMANAME"."TEST_PROCEDURE"(3)}' , when using native 'Oracle Server' the call is 'BEGIN "SCHEMANAME"."TEST_PROCEDURE"(:TEST_CURSOR, 1); END ;'In ODBC or OLE DB, the cursor is still used however it is not listed within the SQL Statement as in the Native connection. This is the behavior from Crystal Reports 9 forward that the cursor is not shown through ODBC/OLE DB.In addition to that as the issue is only with the Oracle OLE DB provider and I would suggest you to contact Oracle about this issue, since the issue occurs outside of Crystal Reports when using QTADO with a standard call, so it is not an issue between Crystal Reports and Oracle.The issue is only with Oracle OLE DB provider as the same Oracle stored procedure call works within QTADO with the MS Oracle OLE DB provider.As the issue is with the OLE DB Provider and not with Crystal Reports, we may not be able to proceed further. Hence, I am closing this case from Case Management System.

SQL Server 2014 Express (32 bit) issues with Microsoft OLE DB Provider for Visual FoxPro

Hello, I am trying to create a sample data warehouse and some reports etc to demonstrate SQL server and subsequent automation to a company I am working for. I am trying to import data from the company's VFP based software into a new SQL Server database.
(please note, this is not custom developed software, so i am unable to push the data from VPF)
I keep getting errors and SQL server crashes when i try to access the Microsofl OLE DB Provider for Visual Fox Pro similar to this thread https://social.msdn.microsoft.com/Forums/en-US/88296548-553e-4402-93e3-6f26f5de343d/dtswizard-importexport-utility-error-trying-to-use-vfp-oledb-provider?forum=sqldataaccess
however, the solution outlined in that thread will not work, as i cannot create an SSIS package in Express.
I have also attempted to use the OLE DB in Excel as well to test it, and it crashes Excel the same way.
results of the following query Exec master.dbo.xp_msver
Index Name
Internal_Value Character_Value
1 ProductName
NULL Microsoft SQL Server
2 ProductVersion
786432 12.0.2000.8
3 Language
1033 English (United States)
4 Platform
NULL NT INTEL X86
5 Comments
NULL SQL
6 CompanyName
NULL Microsoft Corporation
7 FileDescription
NULL SQL Server Windows NT
8 FileVersion
NULL 2014.0120.2000.08 ((SQL14_RTM).140220-1752)
9 InternalName
NULL SQLSERVR
10 LegalCopyright
NULL Microsoft Corp. All rights reserved.
11 LegalTrademarks
NULL Microsoft SQL Server is a registered trademark of Microsoft Corporation.
12 OriginalFilename
NULL SQLSERVR.EXE
13 PrivateBuild
NULL NULL
14 SpecialBuild
131072008 NULL
15 WindowsVersion
131072008 6.1 (7601)
16 ProcessorCount
8 8
17 ProcessorActiveMask
255 000000ff
18 ProcessorType
586 PROCESSOR_INTEL_PENTIUM
19 PhysicalMemory
4055 4055 (4252094464)
20 Product ID
NULL NULL
Any guidance is appreciated. thanks!

No, I attempted to use the Microsofl OLE DB Provider for Visual Fox Pro to access the .dbf from Excel,
and it behaved identically to the way it did in SQL Server.
I can use the Microsoft Excel Data source in SQL Server to link an excel file to SQL Server perfectly fine.

No data source - OLE DB provider for ODBC is not shown in import and export wizard

Dear Sirs,
Would you please let me know how to activate the OLE DB provider for ODBC in import and export wizard?
Now I could use .NET framework for odbc only but it seems have problem in mapping table fields.
Please advise.
Thanks & Regards,
Clara

see this
http://msdn.microsoft.com/en-us/library/windows/desktop/ms712975(v=vs.85).aspx
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server 2012 Analysis Services." Hresult: 0x80004005 Description: "Internal error: An une

SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server 2012 Analysis Services." Hresult: 0x80004005
Description: "Internal error: An unexpected error occurred (file 'pcxmlacommon.cpp', line 43, function 'PCFault::RaiseError').
I'm getting above error in the pre- execute phase of a DFT when I'm trying to fetch data from a SSAS cube using mdx query.
I'm using OLE DB provider for connecting to cube.
I got one resolution for Error Code 0X8004005, which asked me to add 'Format= Tabular' in cube's connection string. It does not seem to work either. Can any one help me out on this???

You are probably missing an update.
I saw a MS Connect post https://connect.microsoft.com/SQLServer/feedback/details/250920/error-using-oledb-or-datareader-to-get-analysis-services-data where that suggestion was proposed as a fix, but is for an older SQL Server version.
So do there is a question if you pull data from SQL Server 2012 SSAS using SSIS 2012 (so no other build is involved).
Arthur My Blog

Microsoft OLE DB Provider for SQL Server 2012 Analysis Services Error Code = 0x80040E05

I've been running a package for 6 months without any issues that pulls data from a cube via MDX and moves it to a database.
We've recently moved to a new server x64 and the connections all succeed but at runtime (in 64 = T&F) I get the following error:
[SRC AdExchange [87]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E05.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server 2012 Analysis Services." Hresult: 0x00000001 Description: "Error Code = 0x80040E05, External Code = 0x00000000:.".
[SSIS.Pipeline] Error: SRC AdExchange failed the pre-execute phase and returned error code 0xC0202009.
I've installed SQL_AS_OLEDB, SQL_AS_ADOMD from Microsoft® SQL Server® 2012 SP1 Feature Pack
Why is my connection failing?

The server has a 10Gbps network connection.
I've installed CU6 for SQL Server 2012 SP1
http://support.microsoft.com/kb/2874879/en-us#hfi
I'm still getting the same error at runtime in BIDS:
[SRC AdExchange [87]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E05.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server 2012 Analysis Services." Hresult: 0x00000001 Description: "Error Code = 0x80040E05, External Code = 0x00000000:.".
[SSIS.Pipeline] Error: SRC AdExchange failed the pre-execute phase and returned error code 0xC0202009.
Looking at the errorlog, everything looks normal until:
Launched startup procedure 'sp_ssis_startup'.
Attempting to load library 'xpsqlbot.dll' into memory. This is an informational message only. No user action is required.
Using 'xpsqlbot.dll' version '2011.110.2100' to execute extended stored procedure 'xp_qv'. This is an informational message only; no user action is required.
Attempting to load library 'xpstar.dll' into memory. This is an informational message only. No user action is required.
Using 'xpstar.dll' version '2011.110.3000' to execute extended stored procedure 'xp_instance_regread'. This is an informational message only; no user action is required.
Attempting to load library 'xplog70.dll' into memory. This is an informational message only. No user action is required.
Using 'xplog70.dll' version '2011.110.2100' to execute extended stored procedure 'xp_msver'. This is an informational message only; no user action is required.
AppDomain 2 (SSISDB.dbo[runtime].1) created.
Unsafe assembly 'microsoft.sqlserver.integrationservices.server, version=11.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil' loaded into appdomain 2 (SSISDB.dbo[runtime].1).
Unsafe assembly 'microsoft.sqlserver.integrationservices.server, version=11.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil' loaded into appdomain 2 (SSISDB.dbo[runtime].1).
AppDomain 3 (master.sys[runtime].2) created.
Software Usage Metrics is enabled.
SQL Server is terminating because of a system shutdown. This is an informational message only. No user action is required.
Service Broker manager has shut down.
Error: 17054, Severity: 16, State: 1.
The current event was not reported to the Windows Events log. Operating system error = (null). You may need to clear the Windows Events log if it is full.
.NET Framework runtime has been stopped.
SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
The SQL Server Network Interface library could not deregister the Service Principal Name (SPN) [ MSSQLSvc/XXXXXXXXXX.com ] for the SQL Server service. Error: 0xffffffff, state: 63. Administrator should deregister this SPN manually to avoid client authentication
errors.
The SQL Server Network Interface library could not deregister the Service Principal Name (SPN) [ MSSQLSvc/XXXXXXXXXX.com:1433 ] for the SQL Server service. Error: 0xffffffff, state: 63. Administrator should deregister this SPN manually to avoid client authentication
errors.
Wondering about the unsafe assembly in SSIS and deregistering the SPN..
Anyone have any ideas on how to resolve this?
Thanks!

Native error code -2147217887 0x80040e21 Microsoft OLE DB Provider for ODBC Drivers: ODBC driver does not support the requested properties.

I configured MySQL in TestStand and making a query in TestStand like this:
Command :=> "SELECT * FROM crc_table ; " or "SELECT CRC_Value FROM crc_table ; " returns the total number of records without any errors.
But when I add the "where" clause
"SELECT crc_table.CRC_Value FROM crc_table where crc_table.File_ID= Locals.File_ID and crc_table.Version_ID = Locals.Version_ID and crc_table.Link_ID = Locals.Link_ID; "
I get the error as:
Error, The following SQL command failed: 'SELECT crc_table.CRC_Value FROM crc_table where crc_table.File_ID= Locals.File_ID and crc_table.Version_ID = Locals.Version_ID and crc_table.Link_ID = Locals.Link_ID; ...' Native error code -2147217887 0x80040e21 Microsoft OLE DB Provider for ODBC Drivers: ODBC driver does not support the requested properties. [Error Code: -10, User-defined error code.]
I tried the same syntax in MySQL Query Browser and got the correct result:
SELECT crc_table.CRC_Value FROM crc_table where crc_table.File_ID= "FID1" and crc_table.Version_ID = "VID1" and crc_table.Link_ID = "L1";
I would appreciate your help.
Thank you,
Vidula

Vidula,
I am not completely sure if this is the cause of the error but it is something that will cause problems if it is not fixed. In your SQL statement you must properly concatenate your strings with your variables. In the statement you posted you were simply putting the variable names in the string, not actually pulling their values. To do so properly your query should look something like this:
"SELECT crc_table.CRC_Value FROM crc_table where crc_table.File_ID='"+Locals.File_ID+"' and crc_table.Version_ID = '"+ Locals.Version_ID+"' and crc_table.Link_ID = '"+Locals.Link_ID+"' ;"
This way we are using the values of the variables in conjunction with the text strings. In this case the usage of single quotes (') casts the variables as strings so you may need to change this character sequence, but from the second example you gave I think that your variables are of type string so this should work fine.
Message Edited by herosphro on 04-01-2008 03:52 PM
John B.
Applications Engineer
National Instruments

Oracle OLE DB Provider for 8.0.5

Similar Messages

Maybe you are looking for