Oracle release for ECC6

Dear concerned,
Kindly let me know the minimum oracle release required for ECC6 upgradation
from SAP R/3 enterprise 4.70.
Also let me know if it is required to have ECC5 before upgrading to ECC6.
Thanks & Regards,
Sumit

The PREPARE for the upgrade can be done using 9.2 but you need to upgrade to 10g before you start the actual upgrade.
You can to directly from 4.7 to ERP 6.0
All that is covered in the upgrade guide: http://service.sap.com/instguides
Markus

Similar Messages

Oracle client for SCO Unix

Hi,
Where I can't download oracle client for SCO Unix ?
Thanks.

You're right. You can't download Oracle client for SCO Unix.
I'm not sure what you mean by "SCO Unix", but if you go to MetaLink and look at the Certification matrix, you see two different listings that make reference to SCO:
Unixware (SCO) - Terminal Oracle release for this platform was 8.1.7.
Intel SCO Open Unix 8 with LKP - Terminal Oracle release for this platform was 9.0.1.
So, I think you're out of luck.
-Mark

Is Oracle 11g released for NW04s and ECC6.0?

Is Oracle 11g released for NW04s and ECC6.0?
Please help. Thanks!

Plain and simple: No, it isn't.
Check the SAP on Oracle homepage [here|SAP on Oracle] in SDN and read the latest development news on this topic including a rough schedule.
regards,
Lars

Want to use single oracle home for multiple database releases

Hi,
I have following 3 different databases.
Oracle7 Server Release 7.3.4.4.0
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit
I want to access these databases using single oracle home. Please advise which client version I have to install to access these. I tried using Oracle Release 9.2.0.1.0 client but I am not able to connect to oracle 7 by using this.I am ready to have multiple oracle homes.But what client version I have to install and where can I get it.Your help will be highly appreciated.

... and 7 is using oracle 8.1.7 client.From your sales representative. 8i is no longer available for downloading,because desupported since many years.
Werner

How to set JDBC Data Sources in Oracle MapViewer for Oracle database 12c Release 1 (12.1.0.1)

How to set JDBC Data Sources in Oracle MapViewer for Oracle database 12c Release 1 (12.1.0.1)?
The following is my configuration in the conf\mapViewerConfig.xml:
<map_data_source name="mvdemo12"
jdbc_host="127.0.0.1"
jdbc_sid="orcl12c1"
jdbc_port="1522"
jdbc_user="mvdemo"
jdbc_password="7OVl2rJ+hOYxG5T3vKJQb+hW4NPgy9EN"
jdbc_mode="thin"
number_of_mappers="3"
allow_jdbc_theme_based_foi="true"
editable="true"/>

But it does not work.
After use "sqlplus mvdemo/[email protected]:1522/pdborcl", it connected to the Oracle database 12c.
Does anyone know it?
Thanks,

For 11.1.1.7.1 use the syntax for jdbc_sid, i.e.
//mypdb1.foo.com as described in the README,
- MapViewer native (non-container) data sources can now use database service name in place of SID. To supply a db service name, you will use the same jdbc_sid attribute, but specify the service name with double slashes in front, such as follows:
<map_data_source name="myds"
    jdbc_host="foo.com"
    jdbc_sid="//mypdb1.foo.com"
    jdbc_port="1522"
/>
For 11.1.1.7.0 use a container_ds instead.
i.e. instead of using
<map_data_source name="my_12c_test"
                   jdbc_host="mydbinstance"
                   jdbc_sid="pdborcl12c"
                   jdbc_port="1522"
                   jdbc_user="mytestuser"
                   jdbc_password="m2E7T48U3LfRjKwR0YFETQcjNb4gCMLG8/X0KWjO00Q="
                   jdbc_mode="thin"
                   number_of_mappers="6"
                   allow_jdbc_theme_based_foi="false"
                   editable="false"
   />
use
<map_data_source name="my_12c_test"
                   container_ds="jdbc/db12c"
                   number_of_mappers="6"
                   allow_jdbc_theme_based_foi="false"
                   editable="false"
   />
In my case the Glassfish 3.1.2.2 JDBC connection pool definition was
Property
url jdbc:oracle:thin:@mydbinstance:1522/pdborcl12c.rest_of.service.name
Uncheck the Wrap JDBC Objects option in Advanced panel, i.e. the Edit JDBC Connection Pool Advanced properties page.
Add a JDBC resource for that newly created pool
Use that in mapviewerconfig.xml as above

Load Balancing for Oracle Release 11i

Hi there,
I am trying to find some recommendations on the need for load balancing in the middle tier for a 3 tier Oracle Release 11i implementation. Here are the questions that I have.
1. Is load balancing very common for a 11i implementation ?
2. What are the probable issues that one might encounter if there is no load balancing ?
3. If there is load balancing how many servers are generally used for the same ?
4. Do we only install Forms server on multiple servers or we install WebDB and Apache on all the servers ?
5. Is it true that Web servers are the most likely to be down and thus mandating the use of load balancing ? If that is true, would it be prudent to install Web Server and Form Server on each server m/c and in the process having redundant servers ?
Let me know your thoughts.
Thanks,
- Raj

I'm in the middle of doing this right now. There is a doc on metalink (233428.1) that details the process. I would highly recommend trying this in dev/test env first. Even though the instructions are very straight forward and not very complicated, I'm still having configuration issues.
Clint

JSP demo PTS included with Oracle 9i Developer Release for Mac not working

Hello all, please pardon my ignorance, but I am an Oracle DBA not a JSP programmer.
I have installed Oracle 9i developer release for Mac OSX and it included a demo application in JSP called pts.
I followed all the instruction and it still doesn't seem to work.
When I try to login to the application I get the following exception:
exception
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: 3 in the jsp file: /oradev/pts/solmktinit.inc
Generated servlet error:
[javac] Since fork is true, ignoring compiler setting.
[javac] Compiling 1 source file
[javac] Since fork is true, ignoring compiler setting.
[javac] /usr/local/jakarta-tomcat-4.1.24/work/Standalone/localhost/_/oradev/pts/login_jsp.java:7: cannot resolve symbol
[javac] symbol : class DBAccess
[javac] location: package pts
[javac] import oradev.pts.DBAccess;
I'm not sure what this means or how to fix it. I'm sure it's something simple like modifying my classpath or something, but, as I said, I don't know where to begin.
Any assistance or suggestions would be greatly appreciated.

Can't you just use the 10g client ?
I have not tested the 9i dev. with oci calls but I would not be surprised if you try this on tiger. That won't work AFAIK.
regards,
Ronald.
http://homepage.mac.com/ik_zelf/oracle

When is Oracle Adapter for SAP 10.1.2.0.2 released?

Hi,
I'm desperately waiting for the release of the Oracle Adapter for SAP
10.1.2.0.2. It is stated as Projected on the Download site.
I do still have serious problems with bug 2574376. This bug was fixed already
in July 2004. In that bug is stated that it is fixed in 10.1.2.
I am using the workaround to kill the process. But when I kill the process while the
adapter is processing data for update in SAP, I am losing that data. So the
update does not take place in SAP and the data is not in the persistence
anymore.
So please release this version!
Regards,
Aard-Jan

Yes, but not for HPUX jet. And that is what I need.
Via Metalink I heard that it will be available around august.

Release notes for ECC6.0

Hi Friends,
I want the Release notes and version comparision for ECC6.0, as our client is going to upgrade from 4.6c to ECC6.0. I went through the related threads where i found the website servive.sap.com. But the thing is that i'm nt able to access that as i'm nt having user id & password. so can any one help me out apart from this site where can i get the release notes.

Check this way...
http://service.sap.com/releasenotes
Release Notes
mySAP Solutions
mySAP ERP
SAP ERP 2004
SAP ERP 2005
ECC 6.0
German
English
Japanese
R/3
in the left corner you can see links for ECC5.0, ECC6.0 etc. you can click and see what is the difference between older and latest one.

WebDB 2.2/RedHat 6.1. For God's sake why doesn't Oracle release some documentation??

Someone please tell me how to get past the
"Enter your Oracle database SYS user password and a TNS names alias" page. My password doesn't show up as ****'s or spaces. Do I have termcap problem here? I've tried different term types and none of the obvious ones help.
I enter change_on_install for the password and "oracle" (my SID) for the TNSNAMES alias. But I always get a "You entered an incorrect system password or an incorrect TNS names alias" error message. Which is it? Why doesn't it just say "Oracle doesn't work". Or "What you entered doesn't compute". Or "You f%$^ing dumb ass, don't you f$%^ing know anything about Oracle, you should have entered something else". These messages are equally as useful as the current response. Do I need to create a new TNS names alias? If so why? And where is the documentation on this?
I'm guessing that because Oracle released Webdb on Linux it does actually work and that someone, somewhere got it to work. Otherwise Oracle is no better than Microsucks in their support effort ("Well it works on my system, you must be doing something wrong").
Thanks for any help. I'd really like to use WebDB but if I have to spend any more than 2 days just to get it installed I might as well revert to Winblows NT and self installing, self configuring ZIP files or jump of the Brooklyn bridge and I'd rather do the later.
Bren.

I am a Product Manager for WebDB and I am concerned that you are having such a problematic experience.
Below I have pasted an installation note that is available on MetaLink, this should walk you through the process.
The reason your TNS connection is failing is because WebDB does not know where to connect to. WebDB uses 8.0.5 binaries and therefore cannot use the tnsnames.ora file in the 8i Oracle home. To get it to work you need to do one of two things, either copy the tnsnames.ora file from your 8i home to the new WebDB home you're about to create. Or create yourself an environment variable called TNS_ADMIN that points to [8i home/network/admin]
Don't worry about not seeing asterisks as we don't display any, this is a 'feature' of the character based installer that we use.
With WebDB 3.0 we will not have this problem as we are using 8i binaries and libraries and we will install using the Oracle Universal Installer, not a character mode one.
Hope this helps.
PURPOSE
This document provides detailed installation notes for WebDB 2.2.0.0.4. It is
focused on installing WebDB for an 8.1.5 (8i) database. Since WebDB is based
off of the 8.0.5 binary and library files, it must be installed in a separate
ORACLE_HOME than 8.1.5.
SCOPE & APPLICATION
This document is intended to guide you through every step of the WebDB
installation process against 8i to prevent the most common issues.
BEFORE YOU BEGIN
Create a new directory for the new WebDB ORACLE_HOME separate from the 8.1.5
database ORACLE_HOME.
i.e. /u01/app/oracle/product/webdb/
You must ensure that all of the appropriate environment variables are set before
beginning the installation process. Unset any existing ORACLE environment
settings and only set the following:
ORACLE_HOME-->point this to the WebDB home
i.e. setenv ORACLE_HOME /u01/app/oracle/product/webdb/
LD_LIBRARY_PATH-->point this to the $ORACLE_HOME/lib where $ORACLE_HOME is the
WebDB home
i.e. setenv LD_LIBRARY_PATH $ORACLE_HOME/lib/
SHLIB_PATH-->point this to the $ORACLE_HOME/lib as well where $ORACLE_HOME is the
WebDB home
i.e. setenv SHLIB_PATH $ORACLE_HOME/lib/
LIBPATH (for AIX ONLY)-->point this to the $ORACLE_HOME/lib as well where $ORACLE_HOME is the
WebDB home
i.e. setenv LIBPATH $ORACLE_HOME/lib/
PATH-->append the following $ORACLE_HOME/bin/ where $ORACLE_HOME is the
WebDB home
i.e. setenv PATH $ORACLE_HOME/bin/:$PATH
TNS_ADMIN-->point this to the database home/network/admin directory.
i.e. setenv TNS_ADMIN /u01/app/oracle/product/8.1.5/network/admin
WV_GATEWAY_CFG-->point this to the $ORACLE_HOME/listener/cfg/wdbsvr.app where
$ORACLE_HOME is the WebDB home
i.e. setenv WV_GATEWAY_CFG $ORACLE_HOME/listener/cfg/wdbsvr.app
BEGIN THE INSTALLATION
From the unix prompt, cd to the staging area for your WebDB Media and go to the
orainst director.
i.e. cd /SD_CDROM/orainst/
Run the orainst for the Oracle Installer to begin.
i.e. ./orainst
1.)'Oracle WebDB 2.1 Installation Requirements' Select OK.
2.)'Environment Variable'
ORACLE_BASE - this should be set already
i.e. /u01/app/oracle/
ORACLE_HOME - this should be set to the WeBDB home already
i.e. /u01/app/oracle/product/webdb/
Select OK.
3.)'Relink All Executables?' Select NO.
4.)'Software Asset Manager' - select Oracle WebDB 2.2.0.0.4 and Oracle WebDB
Listener 2.2.0.0.4. Select INSTALL.
5.)'WebDB Listener'
Hostname --> provide the fully qualified host.domain as registered with DNS
i.e. iprodhp2.us.oracle.com
Data Access --> You can name your database access descriptor anything you
would like but it is best if you take the default which is 'WebDB'
WebDB Schema --> This is the schema that all WebDB packages will be installed
under. It is recommended that you again take the default which is 'WEBDB'
Listener Port -- > Ensure that you choose a port that is not already in use.
Port 80 is the default http port. This port number can always be changed
later when you start the WebDB listener.
Select OK.
6.)'Choose the Database' - Select Oracle 8i and Select OK.
7.)Please provide the appropriate sys password and the TNSNAMES alias used to
connect to the 8.1.5 database.
8.)'WEBDB' --> Select the tablespaces you would like to install into.
Installation = WEBDB
Default = <USERS>
Temporary = <TEMP>
Document = <USERS>
Select OK.
9.)WebDB initial password is webdb --> Select OK.
10.)'Choose Language' --> English is automatically installed but you may choose
any additional languages. Select OK.
11.)Installation of the WebDB schema may take a while. You may think your
installer is hanging but in fact it is just installing a lot of information.
Depending on your machine's resources, the average time to complete this
task is usually around 45 minutes to 1 hour.
12.)'WebDB Install Complete' --> Select OK.
13.)It will then install support files.
14.)'WebDB Listener Successfull' Select OK.
15.)Exit Software Asset Manager
Go to the unix prompt to start the listener:
wdbstart host.domain port&WHERE host.domain is the fully qualified host and domain name with DNS
AND port is the http port you would like the listener to start on
i.e. wdbstart iprodhp2.us.oracle.com 22004&
CONFIGURING THE LISTENER
Go the following URL: http://host.domain:port/admin_/gateway.htm
WHERE host.domain is the fully qualified host and domain name with DNS
AND port is the http port you started the listener on
i.e. http://iprodhp2.us.oracle.com:22004/admin_/gateway.htm
Verify that your connect string is correct on the gateway.htm page. This should
be the alias registered in your TNSNAMES.ORA file. Then click Apply. It is
not neccessary to restart the listener after you make the change.
ACCESSING THE WEBDB HOME PAGE
Go to the following URL: http://host.domain:port/
HERE host.domain is the fully qualified host and domain name with DNS
AND port is the http port you started the listener on
i.e. http://iprodhp2.us.oracle.com:22004/
null

When will oracle release patch for bug: 18469114.

When will oracle release patch for bug: 18469114. New reporting requirements regarding ACA and forms 1094-c and 1095-c.

It's more likely that OracleAS 11(g?) will be available at the end of this year or begginning of next year.

Error fetching data from a foxpro db using Oracle Gateway for ODBC

Hi.
I have an 10.2.0.1 database an a 11.2.0 Oracle Gateway for ODBC installed and configured.
The dblink test works fine, I can connect with the foxpro database because if I execute desc centros I can see the
columns of table centros.
The problem comes when I try to execute Select * from centros@fox1;
A syntax error is returned ([Microsoft][ODBC Visual FoxPro Driver]Syntax error. {42000,NativeErr = 200})
I paste down the output of the trace file with HS_FDS_TRACE_LEVEL=255
If I run select codcen from centros@fox1; another error is shown. Tell me if you want the other trace file.
select codcen from centros@fox1
ERROR en lÝnea 1:
ORA-00904: "CODCEN": identificador no vßlido
Oracle Corporation --- JUEVES MAY 31 2012 13:11:24.765
Heterogeneous Agent Release
11.2.0.1.0
Oracle Corporation --- JUEVES MAY 31 2012 13:11:24.750
Version 11.2.0.1.0
Entered hgogprd
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "255"
Entered hgosdip
setting HS_OPEN_CURSORS to default of 50
setting HS_FDS_RECOVERY_ACCOUNT to default of "RECOVER"
setting HS_FDS_RECOVERY_PWD to default value
setting HS_FDS_TRANSACTION_LOG to default of HS_TRANSACTION_LOG
setting HS_IDLE_TIMEOUT to default of 0
setting HS_FDS_TRANSACTION_ISOLATION to default of "READ_COMMITTED"
setting HS_NLS_NCHAR to default of "UCS2"
setting HS_FDS_TIMESTAMP_MAPPING to default of "DATE"
setting HS_FDS_DATE_MAPPING to default of "DATE"
setting HS_RPC_FETCH_REBLOCKING to default of "ON"
setting HS_FDS_FETCH_ROWS to default of "100"
setting HS_FDS_RESULTSET_SUPPORT to default of "FALSE"
setting HS_FDS_RSET_RETURN_ROWCOUNT to default of "FALSE"
setting HS_FDS_PROC_IS_FUNC to default of "FALSE"
setting HS_FDS_CHARACTER_SEMANTICS to default of "FALSE"
setting HS_FDS_MAP_NCHAR to default of "TRUE"
setting HS_NLS_DATE_FORMAT to default of "YYYY-MM-DD HH24:MI:SS"
setting HS_FDS_REPORT_REAL_AS_DOUBLE to default of "FALSE"
setting HS_LONG_PIECE_TRANSFER_SIZE to default of "65536"
setting HS_SQL_HANDLE_STMT_REUSE to default of "FALSE"
setting HS_FDS_QUERY_DRIVER to default of "TRUE"
setting HS_FDS_SUPPORT_STATISTICS to default of "FALSE"
Parameter HS_FDS_QUOTE_IDENTIFIER is not set
setting HS_KEEP_REMOTE_COLUMN_SIZE to default of "OFF"
setting HS_FDS_GRAPHIC_TO_MBCS to default of "FALSE"
setting HS_FDS_MBCS_TO_GRAPHIC to default of "FALSE"
Default value of 32 assumed for HS_FDS_SQLLEN_INTERPRETATION
setting HS_CALL_NAME_ISP to "gtw$:SQLTables;gtw$:SQLColumns;gtw$:SQLPrimaryKeys;gtw$:SQLForeignKeys;gtw$:SQLProcedures;gtw$:SQLStatistics;gtw$:SQLGetInfo"
setting HS_FDS_DELAYED_OPEN to default of "TRUE"
setting HS_FDS_WORKAROUNDS to default of "0"
Exiting hgosdip, rc=0
ORACLE_SID is "DAVID"
Product-Info:
Port Rls/Upd:1/0 PrdStat:0
Agent:Oracle Database Gateway for ODBC
Facility:hsa
Class:ODBC, ClassVsn:11.2.0.1.0_0008, Instance:DAVID
Exiting hgogprd, rc=0
hostmstr: 2057416704:      HOA After hoagprd
hostmstr: 2057416704:      HOA Before hoainit
Entered hgoinit
HOCXU_COMP_CSET=1
HOCXU_DRV_CSET=178
HOCXU_DRV_NCHAR=1000
HOCXU_DB_CSET=178
HOCXU_SEM_VER=102000
Entered hgolofn at 2012/05/31-13:11:25
Exiting hgolofn, rc=0 at 2012/05/31-13:11:25
HOSGIP for "HS_OPEN_CURSORS" returned "50"
HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
HOSGIP for "HS_KEEP_REMOTE_COLUMN_SIZE" returned "OFF"
HOSGIP for "HS_FDS_DELAYED_OPEN" returned "TRUE"
HOSGIP for "HS_FDS_WORKAROUNDS" returned "0"
HOSGIP for "HS_FDS_MBCS_TO_GRAPHIC" returned "FALSE"
HOSGIP for "HS_FDS_GRAPHIC_TO_MBCS" returned "FALSE"
Invalid value of 32 given for HS_FDS_SQLLEN_INTERPRETATION
treat_SQLLEN_as_compiled = 1
Exiting hgoinit, rc=0 at 2012/05/31-13:11:25
hostmstr: 2057416704:      HOA After hoainit
hostmstr: 2057416704:      HOA Before hoalgon
Entered hgolgon at 2012/05/31-13:11:25
reco:0, name:SYSTEM, tflag:0
Entered hgosuec at 2012/05/31-13:11:25
Exiting hgosuec, rc=0 at 2012/05/31-13:11:25
HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
HOSGIP for "HS_FDS_TRANSACTION_LOG" returned "HS_TRANSACTION_LOG"
HOSGIP for "HS_FDS_TIMESTAMP_MAPPING" returned "DATE"
HOSGIP for "HS_FDS_DATE_MAPPING" returned "DATE"
HOSGIP for "HS_FDS_CHARACTER_SEMANTICS" returned "FALSE"
HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
HOSGIP for "HS_FDS_RESULTSET_SUPPORT" returned "FALSE"
HOSGIP for "HS_FDS_RSET_RETURN_ROWCOUNT" returned "FALSE"
HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
using SYSTEM as default value for "HS_FDS_DEFAULT_OWNER"
HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
Entered hgocont at 2012/05/31-13:11:25
HS_FDS_CONNECT_INFO = "Prueba_Foxpro"
RC=-1 from HOSGIP for "HS_FDS_CONNECT_STRING"
Entered hgogenconstr at 2012/05/31-13:11:25
dsn:Prueba_Foxpro, name:SYSTEM
optn:
Entered hgocip at 2012/05/31-13:11:25
dsn:Prueba_Foxpro
Exiting hgocip, rc=0 at 2012/05/31-13:11:25
##>Connect Parameters (len=39)<##
## DSN=Prueba_Foxpro;
#! UID=SYSTEM;
#! PWD=*
Exiting hgogenconstr, rc=0 at 2012/05/31-13:11:25
Entered hgopoer at 2012/05/31-13:11:26
hgopoer, line 233: got native error 0 and sqlstate 01000; message follows...
[*Microsoft][Administrador de controladores ODBC] El controlador no admite una versión de ODBC distinta de la que la necesita la aplicación (vea SQLSetEnvAttr)*. {01000}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:26
hgocont, line 2686: calling SqlDriverConnect got sqlstate 01000
Entered hgolosf at 2012/05/31-13:11:26
ODBC Function-Available-Array 0xFFFE 0x00FF 0xFF00 0xAA7F 0x03B3 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0xEE00 0x395C
Exiting hgolosf, rc=0 at 2012/05/31-13:11:26
DriverName:VFPODBC.DLL, DriverVer:06.86.0001
DBMS Name:Visual FoxPro, DBMS Version:03.00.0000
Exiting hgocont, rc=0 at 2012/05/31-13:11:26 with error ptr FILE:hgocont.c LINE:2686 ID:SQLDriverConnect
Entered hgopoer at 2012/05/31-13:11:26
hgopoer, line 233: got native error 0 and sqlstate HYC00; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Driver not capable {HYC00}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:26
hgolgon, line 795: calling SQLGetInfo got sqlstate HYC00
SQLGetInfo returns N for SQL_CATALOG_NAME
Exiting hgolgon, rc=0 at 2012/05/31-13:11:26 with error ptr FILE:hgolgon.c LINE:795 ID:GetInfo: Support catalogs
hostmstr: 2036506624:      HOA After hoalgon
RPC Calling nscontrol(0), rc=0
hostmstr: 2036506624: RPC Before Upload Caps
hostmstr: 2036506624:      HOA Before hoaulcp
Entered hgoulcp at 2012/05/31-13:11:26
Entered hgowlst at 2012/05/31-13:11:26
Exiting hgowlst, rc=0 at 2012/05/31-13:11:26
SQLGetInfo returns 0x0 for SQL_OWNER_USAGE
TXN Capable:1, Isolation Option:0x2
SQLGetInfo returns 0 for SQL_MAX_SCHEMA_NAME_LEN
SQLGetInfo returns 128 for SQL_MAX_TABLE_NAME_LEN
SQLGetInfo returns 0 for SQL_MAX_PROCEDURE_NAME_LEN
SQLGetInfo returns ` (0x60) for SQL_IDENTIFIER_QUOTE_CHAR
SQLGetInfo returns Y for SQL_COLUMN_ALIAS
16 instance capabilities will be uploaded
capno:1964, context:0x00000000, add-info: 0
capno:1989, context:0x00000000, add-info: 0
capno:1991, context:0x0001ffff, add-info: 0
capno:1992, context:0x0001ffff, add-info: 1, translation:"`"
capno:3042, context:0x00000000, add-info: 0, translation:"42"
capno:3047, context:0x00000000, add-info: 0, translation:"57"
capno:3049, context:0x00000000, add-info: 0, translation:"59"
capno:3050, context:0x00000000, add-info: 0, translation:"60"
capno:3066, context:0x00000000, add-info: 0
capno:3067, context:0x00000000, add-info: 0
capno:3068, context:0x00000000, add-info: 0
capno:3069, context:0x00000000, add-info: 0
capno:3500, context:0x00000001, add-info: 91, translation:"42"
capno:3501, context:0x00000001, add-info: 93, translation:"57"
capno:3502, context:0x00000001, add-info: 107, translation:"59"
capno:3503, context:0x00000001, add-info: 110, translation:"60"
Exiting hgoulcp, rc=0 at 2012/05/31-13:11:26
hostmstr: 2036506624:      HOA After hoaulcp
hostmstr: 2036506624: RPC After Upload Caps
hostmstr: 2036506624: RPC Before Upload DDTR
hostmstr: 2036506624:      HOA Before hoauldt
Entered hgouldt at 2012/05/31-13:11:27
NO instance DD translations were uploaded
Exiting hgouldt, rc=0 at 2012/05/31-13:11:27
hostmstr: 2036506624:      HOA After hoauldt
hostmstr: 2036506624: RPC After Upload DDTR
hostmstr: 2036506624: RPC Before Begin Trans
hostmstr: 2036506624:      HOA Before hoabegn
Entered hgobegn at 2012/05/31-13:11:27
tflag:0 , initial:1
hoi:0x12f094, ttid (len 54) is ...
00: 54455354 2E524547 52455353 2E524442 [TEST.REGRESS.RDB]
10: 4D532E44 45562E55 532E4F52 41434C45 [MS.DEV.US.ORACLE]
20: 2E434F4D 2E663033 63383037 372E392E [.COM.f03c8077.9.]
30: 34342E37 3735 [44.775]
tbid (len 10) is ...
0: 09002C00 07030000 0104 [..,.......]
Exiting hgobegn, rc=0 at 2012/05/31-13:11:27
hostmstr: 2036506624:      HOA After hoabegn
hostmstr: 2036506624: RPC After Begin Trans
hostmstr: 2036506624: RPC Before Describe Table
hostmstr: 2036506624:      HOA Before hoadtab
Entered hgodtab at 2012/05/31-13:11:27
count:1
table: CENTROS
Entered hgopdsc at 2012/05/31-13:11:27
Describing procedure CENTROS
Output hoada
hgopdsc, line 1426: NO hoada to print
Exiting hgopdsc, rc=942 at 2012/05/31-13:11:27
The hoada for table CENTROS follows...
hgodtab, line 904: NO hoada to print
Exiting hgodtab, rc=0 at 2012/05/31-13:11:27
hostmstr: 2036506624:      HOA After hoadtab
hostmstr: 2036506624: RPC After Describe Table
hostmstr: 2036506624: RPC Before SQL Bundling
hostmstr: 2036506624:      HOA Before hoxpars
Entered hgopars, cursor id 1 at 2012/05/31-13:11:27
type:0
SQL text from hgopars, id=1, len=23 ...
00: 53454C45 4354202A 2046524F 4D202243 [SELECT * FROM "C]
10: 454E5452 4F5322 [ENTROS"]
Exiting hgopars, rc=0 at 2012/05/31-13:11:28
hostmstr: 2036506624:      HOA After hoxpars
hostmstr: 2036506624: RPC After SQL Bundling
hostmstr: 2036506624: RPC Before SQL Bundling
hostmstr: 2036506624:      HOA Before hoxopen
Entered hgoopen, cursor id 1 at 2012/05/31-13:11:28
hgoopen, line 87: NO hoada to print
Deferred open until first fetch.
Exiting hgoopen, rc=0 at 2012/05/31-13:11:28
hostmstr: 2036506624:      HOA After hoxopen
hostmstr: 2036506624:      HOA Before hoxdscr
Entered hgodscr, cursor id 1 at 2012/05/31-13:11:28
Allocate hoada @ 023E983C
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]*Descriptor type out of range* {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:1(codcen): dtype:1 (CHAR), prc/scl:8/0, nullbl:0, octet:8, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:2(litcen): dtype:1 (CHAR), prc/scl:45/0, nullbl:0, octet:45, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:3(codpos): dtype:1 (CHAR), prc/scl:5/0, nullbl:0, octet:5, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:4(codprov): dtype:1 (CHAR), prc/scl:2/0, nullbl:0, octet:2, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:5(codmun): dtype:1 (CHAR), prc/scl:3/0, nullbl:0, octet:3, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:6(codecol): dtype:1 (CHAR), prc/scl:2/0, nullbl:0, octet:2, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:7(codesin): dtype:1 (CHAR), prc/scl:2/0, nullbl:0, octet:2, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:8(cb): dtype:1 (CHAR), prc/scl:4/0, nullbl:0, octet:4, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:9(cs): dtype:1 (CHAR), prc/scl:4/0, nullbl:0, octet:4, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:10(digitocon): dtype:1 (CHAR), prc/scl:2/0, nullbl:0, octet:2, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:11(cuenta): dtype:1 (CHAR), prc/scl:10/0, nullbl:0, octet:10, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopcda at 2012/05/31-13:11:28
Column:12(solar): dtype:2 (NUMERIC), prc/scl:5/0, nullbl:0, octet:10, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopcda at 2012/05/31-13:11:28
Column:13(construido): dtype:2 (NUMERIC), prc/scl:5/0, nullbl:0, octet:10, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:14(domicen): dtype:1 (CHAR), prc/scl:40/0, nullbl:0, octet:40, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:15(telef): dtype:1 (CHAR), prc/scl:11/0, nullbl:0, octet:11, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:16(fax): dtype:1 (CHAR), prc/scl:11/0, nullbl:0, octet:11, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:17(cif): dtype:1 (CHAR), prc/scl:11/0, nullbl:0, octet:11, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:18(litloc): dtype:1 (CHAR), prc/scl:30/0, nullbl:0, octet:30, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
hgodscr, line 910: Printing hoada @ 023E983C
MAX:18, ACTUAL:18, BRC:100, WHT=5 (SELECT_LIST)
hoadaMOD bit-values found (0x200:TREAT_AS_CHAR)
DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
1 CHAR N 8 8 0/ 0 0 0 200 codcen
1 CHAR N 45 45 0/ 0 0 0 200 litcen
1 CHAR N 5 5 0/ 0 0 0 200 codpos
1 CHAR N 2 2 0/ 0 0 0 200 codprov
1 CHAR N 3 3 0/ 0 0 0 200 codmun
1 CHAR N 2 2 0/ 0 0 0 200 codecol
1 CHAR N 2 2 0/ 0 0 0 200 codesin
1 CHAR N 4 4 0/ 0 0 0 200 cb
1 CHAR N 4 4 0/ 0 0 0 200 cs
1 CHAR N 2 2 0/ 0 0 0 200 digitocon
1 CHAR N 10 10 0/ 0 0 0 200 cuenta
3 DECIMAL N 7 7 5/ 0 0 0 0 solar
3 DECIMAL N 7 7 5/ 0 0 0 0 construido
1 CHAR N 40 40 0/ 0 0 0 200 domicen
1 CHAR N 11 11 0/ 0 0 0 200 telef
1 CHAR N 11 11 0/ 0 0 0 200 fax
1 CHAR N 11 11 0/ 0 0 0 200 cif
1 CHAR N 30 30 0/ 0 0 0 200 litloc
Exiting hgodscr, rc=0 at 2012/05/31-13:11:28 with error ptr FILE:hgodscr.c LINE:615 ID:Transfer Octet Length
hostmstr: 2036506624:      HOA After hoxdscr
hostmstr: 2036506624: RPC After SQL Bundling
hostmstr: 2036506624: RPC Before SQL Bundling
hostmstr: 2036506624:      HOA Before hoxclse
Entered hgoclse, cursor id 1 at 2012/05/31-13:11:28
Exiting hgoclse, rc=0 at 2012/05/31-13:11:28
hostmstr: 2036506624:      HOA After hoxclse
hostmstr: 2036506624:      HOA Before hoadafr
Entered hgodafr, cursor id 1 at 2012/05/31-13:11:28
Free hoada @ 023E983C
Exiting hgodafr, rc=0 at 2012/05/31-13:11:28
hostmstr: 2036506624:      HOA After hoadafr
hostmstr: 2036506624:      HOA Before hoxpars
Entered hgopars, cursor id 1 at 2012/05/31-13:11:28
type:0
SQL text from hgopars, id=1, len=235 ...
00: 53454C45 43542041 312E2263 6F646365 [SELECT A1."codce]
10: 6E222C41 312E226C 69746365 6E222C41 [n",A1."litcen",A]
20: 312E2263 6F64706F 73222C41 312E2263 [1."codpos",A1."c]
30: 6F647072 6F76222C 41312E22 636F646D [odprov",A1."codm]
40: 756E222C 41312E22 636F6465 636F6C22 [un",A1."codecol"]
50: 2C41312E 22636F64 6573696E 222C4131 [,A1."codesin",A1]
60: 2E226362 222C4131 2E226373 222C4131 [."cb",A1."cs",A1]
70: 2E226469 6769746F 636F6E22 2C41312E [."digitocon",A1.]
80: 22637565 6E746122 2C41312E 22736F6C ["cuenta",A1."sol]
90: 6172222C 41312E22 636F6E73 74727569 [ar",A1."construi]
A0: 646F222C 41312E22 646F6D69 63656E22 [do",A1."domicen"]
B0: 2C41312E 2274656C 6566222C 41312E22 [,A1."telef",A1."]
C0: 66617822 2C41312E 22636966 222C4131 [fax",A1."cif",A1]
D0: 2E226C69 746C6F63 22204652 4F4D2022 [."litloc" FROM "]
E0: 43454E54 524F5322 204131 [CENTROS" A1]
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 200 and sqlstate 42000; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Syntax error. {42000,NativeErr = 200}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgopars, line 457: calling SQLPrepare got sqlstate 42000
Exiting hgopars, rc=28500 at 2012/05/31-13:11:28 with error ptr FILE:hgopars.c LINE:487 ID:Prepare stmt
hostmstr: 2036506624:      HOA After hoxpars
hostmstr: 2036506624: RPC After SQL Bundling

The first issue I see is that Oracle 10.2.0.1 was never certified with DG4ODBC 11. Only 10.2.0.4 or 10.2.0.5 can be used as the Oracle database HS kernel requires a gateway compatibility patch and this patch is included in 10.2.0.4 or 10.2.0.5 Oracle database patch set.
Then another error in the trace is that for each column description you have an error:
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]*Descriptor type out of range* {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
It seems it is not critical as DG4ODBC continues, but a more detailed analysis would require an ODBC trace.
When looking at the table description it seems the column names are all in lower letters, for example: solar. So commonly Dg4ODBC needs to quote the names
00: 53454C45 43542041 312E2263 6F646365 [SELECT A1."codce]
10: 6E222C41 312E226C 69746365 6E222C41 [n",A1."litcen",A]
20: 312E2263 6F64706F 73222C41 312E2263 [1."codpos",A1."c]
30: 6F647072 6F76222C 41312E22 636F646D [odprov",A1."codm]
40: 756E222C 41312E22 636F6465 636F6C22 [un",A1."codecol"]
50: 2C41312E 22636F64 6573696E 222C4131 [,A1."codesin",A1]
60: 2E226362 222C4131 2E226373 222C4131 [."cb",A1."cs",A1]
70: 2E226469 6769746F 636F6E22 2C41312E [."digitocon",A1.]
80: 22637565 6E746122 2C41312E 22736F6C ["cuenta",A1."sol]
90: 6172222C 41312E22 636F6E73 74727569 [ar",A1."construi]
A0: 646F222C 41312E22 646F6D69 63656E22 [do",A1."domicen"]
B0: 2C41312E 2274656C 6566222C 41312E22 [,A1."telef",A1."]
C0: 66617822 2C41312E 22636966 222C4131 [fax",A1."cif",A1]
D0: 2E226C69 746C6F63 22204652 4F4D2022 [."litloc" FROM "]
E0: 43454E54 524F5322 204131 [CENTROS" A1]
and according to the trace the FoxPro ODBC driver doesn't like these quotes and reports a syntax error.
So this explains at least why select codcen from centros@fox1 will fail. In general the Oracle database is case insensitive and translates all object names to upper case and the select it will pass to the foreign database would be similar to:
select CODCEN from CENTROS => which will fail as FoxPro is case sensitive. So the error message ORA-00904 (missing column name) is correct and the statement you need to use is:
select "codcen" from centros@fox1;
But this might lead again to the Syntax error you got earlier => You need to check which sign (single quote, back tick, double quote) Foxpro uses to quote object names and then set the gateway parameter HS_FDS_QUOTE_IDENTIFIER accordingly.
To check which character can be used to quote column/table names you might use the Microsoft ODBc test utility which was distributed in the old MDAC 2.8:
http://www.microsoft.com/downloads/details.aspx?familyid=5067faf8-0db4-429a-b502-de4329c8c850&displaylang=en
Edited by: kgronau on Jun 1, 2012 7:27 AM
If you know where I can download the MS FoxPro ODBC driver, please let me know and I'll check.

API or interface table to create releases for a blanket purchase agreement

Hi
I need to know if Oracle provides a standard API or interface table to create releases for a blanket purchase agreement.
I tried using the release_num field in PO_HEADERS_INTERFACE, PO_LINES_INTERFACE. But this is not working.
I'm able to create the blanket purchase agreement using the open interfaces, but not the releases.
Regards,
Alister

Hi Alister,
You can't create a release of a BPA through API, there is no such APIs provided by oracle.
Where as you can create a BPA by using API. You need to dump/poplulate data in PO_headers_interface & PO_Lines_intreface table.. Then use Purchasing Documents Open Interface API to create a BPA.
Regards,
S.P DASH

Installing Oracle Services for MTS (9.2) on a 8.1.7 Database

Hello,
I'm trying to run the script oramtsadmin.sql which comes with the Oracle Services for MTS 9.2 on a 8.1.7 database.
When trying to compile the UTL_ORAMTS package I get the following error:
The following error has occurred:
PACKAGE BODY MTSSYS.UTL_ORAMTS
On line: 0
PLS-00908: The stored format of UTL_ORAMTS is not supported by this release
Any idea where I can find a copy of this wrapped package that can be compiled on a 8.1.7 database ?
thx,
Piet Neyrinck

I have the same problem. The documentation sayes that it will work with 8.1.7, but when I run the script I get the same error

Error while Installing Oracle Services for Microsoft Transaction Server

I downloaded "Oracle9i Database Release 2 Enterprise/Standard/Personal Edition for Windows NT/2000/XP" and installed the personal edition. It did not install successfully and gave this error message:
Error while Installing Oracle Services for Microsoft Transaction Server
The specified key was not found while trying to GetValue
- stop installation of all products.
- stop installation of this component only.
The installation of Oracle 9i Database was unsuccessful
The Integration tools and client installed just fine from the same download. Why didn't the database install successfully? All the other components seemed to install just fine and the database appeared to be created - but I could not open it and there was not start menu option for DBA Studio.
I am running Windows 2000 professional with Service Pack 3 on a 2 GHz Pentium4 machine with 512MB Rambus RAM, 32bit color graphics ATI All-in-Wonder card, about 40GB of disk space, a local peer-to-peer network via cat5 cable to another Win2k P3 machine, and Creative Soundblaster Audigy card. Do I need to adjust any network settings? Would it help or hinder if I installed MS IIS? WinNT has a Microsoft Transaction Server (MTS) but Win2k has COM+ instead; does that make a difference in terms of the installer looking for MTS? Do I need to configure COM+ in some special way / change settings?

HI Salman,
I am doing the following.
1. I am installing Oracle 10.2.01 Database(Not Client) on my windows Xp laptop. While installation i Choose the custom option and Check the Oracle Windows Interface. In that i check the "Install Oracle Services for Microsoft Transaction server" checkbox. The installation goes on fine till 99% and when it tries to install the
Oracle Services for Microsoft Transaction server it gives an error saying that "Microsoft Transaction server" was not found on the system.
I had previously installed the same on my laptop and it was working fine. but after uninstallation when i try to re install i get this problem.
If i go to the services.msc option in windows i still see the OracleMTSRecoveryService option even when i have uninstalled oracle. But when i try to start the services i get the following error
Could Not start the OracleMTSRecoveryService on the local computer.
Error 3: The system cannot find the file specified.
Any help on how to resolve this issue will be highly appreciated

Oracle release for ECC6

Similar Messages

Maybe you are looking for