Oracle's JVM Timezone x sessiontimezone x dbtimezone (how would they match?)
hello all,
I wonder if Oracle's JVM gets its default timezone from Oracle's timezone ... and if it does.. would it get from dbtimezone or sessiontimezone?
how would I alter dbtimzone to test if this works out?
thanks for now
Rodrigo
hello all,
I wonder if Oracle's JVM gets its default timezone from Oracle's timezone ... and if it does.. would it get from dbtimezone or sessiontimezone?
how would I alter dbtimzone to test if this works out?
thanks for now
Rodrigo
Similar Messages
-
The Oracle JRockit JVM is not supported by SAP JCo 3.0.5.
Hello all,
I am preparing our new Oracle Fusion Middleware platforms. So far we have been running BPEL 10.1.3.4.0 and we are going to build the 11g platform (WLS and SOA suite) in parallel.
I have already installed WLS Server 10.3.3 and then SOA Suite + the SOA patchset bu selecting always Jrockit_160_17_R28.0.0-679.
Now I am abaout to install the adapters and I red in the documentation
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e17054/intro.htm
For supported JVM information that corresponds to each operating system, see the SAP Note #1077727 in the SAP Service Marketplace.
Note:
The Oracle JRockit JVM is not supported by SAP JCo 3.0.5.
Is anybody aware of this? If it is valid, how could I achieve not to re-installa everything from scratch and select SUN JVM?
Could I for example create a new Managed Server where I will explicity select SUN JVM to be installed for this instance?
Best Regards,
Loukas RougkalasPlease post your question to SOA forum. This forum is about WebLogic Connector Container.
-
Is there any standard pl-sql procedure or java procedure , that gives the version of JVM , within oracle 8i.From the readme.txt I am sure that the version of JVM is 1.2.1 , but I would like to have a function callable from within sqlplus which gives the same result.
Hi Chandrashekaran,
Please note that I can't verify this for you at the time of writing,
but I think that one of the "System" properties gives you the version
of the JVM. So you could write a java stored procedure that retrieves
the JVM version from the appropriate System property. Check the javadoc
for the java.lang.System class. From memory, there is also a method
that lists all the property names -- so you can locate the relevant
one and then use that to get the required information regarding the
JVM version.
Hope this helps,
Avi. -
DB timestamp value with JVM TimeZone
Hi all,
If we have database timestamp "*1970-01-01T16:00:00*", no matter what Time Zone the jvm is running with, we get the java.sql.Timestamp object representing the time "1970-01-01T16:00:00" locally(Shang Hai, Las Vegas, London...). So, the UTC time will be different as well.
I need to do some conversion work to make database timestamp "1970-01-01T16:00:00" as UTC time. Although it will be different in jvms with different time zones, they all mean the same time(UTC time, same million seconds from UTC Time 1970-01-01T00:00:00.000) and will be consistent.
For how to do the conversion, do you have any suggestion?Seems like an odd request.
1. If your database does NOT specify a timezone then the jdbc connection string would have a way to do that explicitly.
2. If you database DOES specify a timezone then you would need to write SQL (not java) that returned a unspecified timezone value, probably a string, which you would use to create a java timestamp (for example via SimpleDateFormat).
The above or course presumes that you understand that the jdbc has perfectly acceptable ways of getting correct timestamps from databases and that displaying a timestamp value has nothing to do with that. -
Sessiontimezone and dbtimezone problem.
Hi All,
please see the two queries:
select sessiontimezone from dual;
select dbtimezone from dual;
the two queries give me correct timezone values while I am working from SQL * plus environment. However when I do it from a java class the query1 returns 0.0 where as the dbtimezone provides me correct values.
Can any one tell me what could be the reason.
As far as I have checked, the JVM system variable "user.timezone" is blank.
How to get a correct time zone of a client?
TIAuser557013,
I think perhaps if I saw your code, I might have an idea about how to help you.
Please also post answers to the following:
* Oracle database version you are using.
* Java version you are using
* JDBC driver (and version) you are using
Good Luck,
Avi. -
Setting timezone in 10g systimestamp/dbtimezone
Using DB 10.2 and want to set the database time zone so that SYSTIMESTAMP stores a time zone as a region rather than h:m offset. I've issued the alter database required to set:
SQL> select dbtimezone from dual;
DBTIMEZONE
Australia/Melbourne
.. and restarted the database, but when I query SYSTIMESTAMP I still get:
SQL> select systimestamp,
2 extract(timezone_region from systimestamp),
3 extract(timezone_abbr from systimestamp) from dual;
SYSTIMESTAMP
EXTRACT(TIMEZONE_REGIONFROMSYSTIMESTAMP) EXTRACT(TI
20-DEC-07 11.44.19.187000 AM +11:00
UNKNOWN UNK
The +11:00 setting I imagine is coming from the OS (Windows Server 2003). The concepts manual implies that the DB setting should be used before the OS, but I get the impression from the Admin Guide, that it needs to be set when the DB is created or modified in the OS only.
Can someone explain how I get the timezone region into the SYSTIMESTAMP ?
Thanks,systimestamp or sysdate always makes a os call to get system time stamp and showes in system timzone
There is timezone session variable which you will set for each session and database's time zone you set during the creation during the creation of db OR before creating a column timestamp with local time zone.
SQL> select sessiontimezone,dbtimezone from dual;
SESSIONTIMEZONE DBTIMEZONE
US/Eastern US/Central
(I am in eastern and my db in central for this test case)
SQL> select current_Timestamp,systimestamp from dual;
CURRENT_TIMESTAMP SYSTIMESTAMP
19-DEC-07 08.29.34.862000 PM US/EASTERN 19-DEC-07 07.29.34.862000 PM -06:00
(MY os in -6:00 time zone :)) -
JDriver for Oracle crashes JVm on solaris
Hi,
I'm using the weblogic jDriver/XA for oracle with oracle 8.1.7 on solaris 2.8.
The weblogic version is 6.1 SP2.
The JVM randomly crashes with this error:
Is the jDriver/XA that comes with weblogic stable ?
Has the jDriver that comes with wlserver 6.1 SP3 fixed this problem ?
Unexpected Signal : 11 occurred at PC=0xfe557f64
Function name=JVM_InternString
Library=/bea/jdk131/jre/lib/sparc/hotspot/libjvm.so
Current Java thread:
at weblogic.jdbc.oci.xa.XA.native_start(Native Method)
at weblogic.jdbc.oci.xa.XA.start(XA.java:70)
at weblogic.jdbc.oci.xa.XADataSource.start(XADataSource.java:640)
at weblogic.jdbc.jta.DataSource.detectedUnavailable(DataSource.java:445)
at weblogic.transaction.internal.ResourceDescriptor$2.execute(ResourceDescriptor.java:991)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Dynamic libraries:
0x10000 /bea/jdk131/jre/bin/../bin/sparc/native_threads/java
0xff350000 /usr/lib/libthread.so.1
0xff390000 /usr/lib/libdl.so.1
0xff200000 /usr/lib/libc.so.1
0xff330000 /usr/platform/SUNW,Ultra-60/lib/libc_psr.so.1
0xfe400000 /bea/jdk131/jre/lib/sparc/hotspot/libjvm.so
0xff2e0000 /usr/lib/libCrun.so.1
0xff1e0000 /usr/lib/libsocket.so.1
0xff100000 /usr/lib/libnsl.so.1
0xff0d0000 /usr/lib/libm.so.1
0xff310000 /usr/lib/libw.so.1
0xff0b0000 /usr/lib/libmp.so.2
0xff080000 /bea/jdk131/jre/lib/sparc/native_threads/libhpi.so
0xff050000 /bea/jdk131/jre/lib/sparc/libverify.so
0xfe7c0000 /bea/jdk131/jre/lib/sparc/libjava.so
0xff020000 /bea/jdk131/jre/lib/sparc/libzip.so
0xfe3b0000 /usr/lib/locale/en_US.ISO8859-1/en_US.ISO8859-1.so.2
0xfe390000 /bea/jdk131/jre/lib/sparc/libnet.so
0xfaed0000 /usr/lib/nss_files.so.1
0xd9200000 /bea/wlserver6.1/lib/solaris/oci817_8/libweblogicoci37.so
0xd8400000 /u01/app/oracle/product/8.1.7/lib/libclntsh.so.8.0
0xfad90000 /usr/lib/libC.so.5
0xfaea0000 /u01/app/oracle/product/8.1.7/lib/libwtc8.so
0xface0000 /usr/lib/libgen.so.1
0xfacc0000 /usr/lib/libsched.so.1
0xfaca0000 /usr/lib/libaio.so.1
0xfac80000 /bea/wlserver6.1/lib/solaris/oci817_8/libweblogicoxa37.so
0xfac10000 /bea/jdk131/jre/lib/sparc/libioser12.so
0xdeae0000 /bea/jdk131/jre/lib/sparc/libawt.so
0xd7480000 /bea/jdk131/jre/lib/sparc/motif21/libmawt.so
0xdc8b0000 /bea/jdk131/jre/bin/../lib/sparc/libmlib_image.so
0xd7200000 /usr/dt/lib/libXm.so.4
0xd7190000 /usr/openwin/lib/libXt.so.4
0xdc7d0000 /usr/openwin/lib/libXext.so.0
0xdce60000 /usr/openwin/lib/libXtst.so.1
0xd7080000 /usr/openwin/lib/libX11.so.4
0xdc7b0000 /usr/openwin/lib/libSM.so.6
0xdc6d0000 /usr/openwin/lib/libICE.so.6
0xdc6a0000 /usr/openwin/lib/libdga.so.1
0xd6f80000 /bea/jdk131/jre/lib/sparc/libfontmanager.so
0xdc5a0000 /usr/openwin/lib/libdps.so.5
0xdc4c0000 /bea/jdk131/jre/lib/sparc/libdcpr.so
0xdc3b0000 /bea/jdk131/jre/lib/sparc/libcmm.so
0xdc2c0000 /bea/jdk131/jre/lib/sparc/libjpeg.so
0xdc890000 /bea/wlserver6.1/lib/solaris/libmuxer.so
0xdc4a0000 /usr/ucblib/libucb.so.1
0xdc790000 /usr/lib/libresolv.so.1
0xdc1c0000 /usr/lib/libelf.so.1
Local Time = Sun Aug 25 19:12:47 2002
Elapsed Time = 21231
# HotSpot Virtual Machine Error : 11
# Error ID : 4F530E43505002BD 01
# Please report this error at
# http://java.sun.com/cgi-bin/bugreport.cgi
# Java VM: Java HotSpot(TM) Client VM (1.3.1_04-b02 mixed mode)
# An error report file has been saved as hs_err_pid342.log.
# Please refer to the file for further information.We have observed some problems for XA in oracle 817 client. You should use 901 client and 901 jDriver
to talk to 817 database as a solution.
Mitesh
prajod wrote:
Hi,
I'm using the weblogic jDriver/XA for oracle with oracle 8.1.7 on solaris 2.8.
The weblogic version is 6.1 SP2.
The JVM randomly crashes with this error:
Is the jDriver/XA that comes with weblogic stable ?
Has the jDriver that comes with wlserver 6.1 SP3 fixed this problem ?
Unexpected Signal : 11 occurred at PC=0xfe557f64
Function name=JVM_InternString
Library=/bea/jdk131/jre/lib/sparc/hotspot/libjvm.so
Current Java thread:
at weblogic.jdbc.oci.xa.XA.native_start(Native Method)
at weblogic.jdbc.oci.xa.XA.start(XA.java:70)
at weblogic.jdbc.oci.xa.XADataSource.start(XADataSource.java:640)
at weblogic.jdbc.jta.DataSource.detectedUnavailable(DataSource.java:445)
at weblogic.transaction.internal.ResourceDescriptor$2.execute(ResourceDescriptor.java:991)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Dynamic libraries:
0x10000 /bea/jdk131/jre/bin/../bin/sparc/native_threads/java
0xff350000 /usr/lib/libthread.so.1
0xff390000 /usr/lib/libdl.so.1
0xff200000 /usr/lib/libc.so.1
0xff330000 /usr/platform/SUNW,Ultra-60/lib/libc_psr.so.1
0xfe400000 /bea/jdk131/jre/lib/sparc/hotspot/libjvm.so
0xff2e0000 /usr/lib/libCrun.so.1
0xff1e0000 /usr/lib/libsocket.so.1
0xff100000 /usr/lib/libnsl.so.1
0xff0d0000 /usr/lib/libm.so.1
0xff310000 /usr/lib/libw.so.1
0xff0b0000 /usr/lib/libmp.so.2
0xff080000 /bea/jdk131/jre/lib/sparc/native_threads/libhpi.so
0xff050000 /bea/jdk131/jre/lib/sparc/libverify.so
0xfe7c0000 /bea/jdk131/jre/lib/sparc/libjava.so
0xff020000 /bea/jdk131/jre/lib/sparc/libzip.so
0xfe3b0000 /usr/lib/locale/en_US.ISO8859-1/en_US.ISO8859-1.so.2
0xfe390000 /bea/jdk131/jre/lib/sparc/libnet.so
0xfaed0000 /usr/lib/nss_files.so.1
0xd9200000 /bea/wlserver6.1/lib/solaris/oci817_8/libweblogicoci37.so
0xd8400000 /u01/app/oracle/product/8.1.7/lib/libclntsh.so.8.0
0xfad90000 /usr/lib/libC.so.5
0xfaea0000 /u01/app/oracle/product/8.1.7/lib/libwtc8.so
0xface0000 /usr/lib/libgen.so.1
0xfacc0000 /usr/lib/libsched.so.1
0xfaca0000 /usr/lib/libaio.so.1
0xfac80000 /bea/wlserver6.1/lib/solaris/oci817_8/libweblogicoxa37.so
0xfac10000 /bea/jdk131/jre/lib/sparc/libioser12.so
0xdeae0000 /bea/jdk131/jre/lib/sparc/libawt.so
0xd7480000 /bea/jdk131/jre/lib/sparc/motif21/libmawt.so
0xdc8b0000 /bea/jdk131/jre/bin/../lib/sparc/libmlib_image.so
0xd7200000 /usr/dt/lib/libXm.so.4
0xd7190000 /usr/openwin/lib/libXt.so.4
0xdc7d0000 /usr/openwin/lib/libXext.so.0
0xdce60000 /usr/openwin/lib/libXtst.so.1
0xd7080000 /usr/openwin/lib/libX11.so.4
0xdc7b0000 /usr/openwin/lib/libSM.so.6
0xdc6d0000 /usr/openwin/lib/libICE.so.6
0xdc6a0000 /usr/openwin/lib/libdga.so.1
0xd6f80000 /bea/jdk131/jre/lib/sparc/libfontmanager.so
0xdc5a0000 /usr/openwin/lib/libdps.so.5
0xdc4c0000 /bea/jdk131/jre/lib/sparc/libdcpr.so
0xdc3b0000 /bea/jdk131/jre/lib/sparc/libcmm.so
0xdc2c0000 /bea/jdk131/jre/lib/sparc/libjpeg.so
0xdc890000 /bea/wlserver6.1/lib/solaris/libmuxer.so
0xdc4a0000 /usr/ucblib/libucb.so.1
0xdc790000 /usr/lib/libresolv.so.1
0xdc1c0000 /usr/lib/libelf.so.1
Local Time = Sun Aug 25 19:12:47 2002
Elapsed Time = 21231
# HotSpot Virtual Machine Error : 11
# Error ID : 4F530E43505002BD 01
# Please report this error at
# http://java.sun.com/cgi-bin/bugreport.cgi
# Java VM: Java HotSpot(TM) Client VM (1.3.1_04-b02 mixed mode)
# An error report file has been saved as hs_err_pid342.log.
# Please refer to the file for further information. -
Oracle 9iR2 JVM installation on MAC OS X
I'm running oracle 9iR2 on MAC OS X, and I'm trying to install the JVM to make some test of java functionalities.
Each time I runed the script $ORACLE_HOME/javavm/install/initjvm.sql, I have an error saying that 'create or replace java system'.
How some body now if this the JVM on MAC OS X is ok? if it is how to install it ?
if not, hwen can we hope to have this function on MAC OS X?Hi Laurent,
Although I'm not running Oracle 9i R2, and I don't use Mac OS X, I just wanted to mention a couple of things that you may be unaware of (since I saw no mention of them in your post).
1. Since you are trying to install java by running the "initjvm.sql" script, I assume that you didn't install java when you installed the database. You can verify this by the following query:
select
VALUE
from
V$OPTION
where
PARAMETER = 'Java'If that returns "TRUE", then java should already be installed in your database. You can check this by running the following query (as the "SYS" user):
select
OBJECT_NAME
from
USER_OBJECTS
where
OBJECT_TYPE like 'JAVA%'and there should be several thousand rows returned.
2. You must run the "initjvm.sql" script as user "SYS".
Hope this helps you.
Good Luck,
Avi. -
Want to profile Oracle 10g Database JVM to figure out performance issues while executing Java Stored Procedures. Need to know the steps to connect a profiling tool like JProfiler to Oracle 10g Database JVM. Also wanted details on Oracle JVM startup command on 10g database to mention the VM parameters to configure Profiling tools.
As a suggestion...
You might be able to find a process id.
As for the VM options try getting properties from System and printing everything in there. -
Oracle timestamp with timezone
Does CR support column of type "timestamp with timezone" column. I am getting error message "Failed to retrive data from database. Details:Not implemented". Thanks
Since this is the Crystal Reports Java forum, you need to specify the explicit Java java.sql Type that the Oracle JDBC driver exposes the database type as.
I'm not familiar with that data type, so don't know if it's mapped to the Timestamp type or not.
Note that CR4E 2.0 supports up to JDBC 4.0 types.
Sincerely,
Ted Ueda -
Change oracle time and timezone
Hi..
I have a few question on oracle time, the question are:-
How to change oracle time ?
How to change oracle timezone setting ?
Is it we have to reboot the system after the changes ?
Thank you,
BaharinHi..
This is my oracle time using command line :-
sqlplusSQL*Plus: Release 10.2.0.3.0 - Production on Wed Apr 14 16:10:00 2010
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Enter user-name:
Enter password:
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
SQL> select systimestamp from dual;
SYSTIMESTAMP
14-APR-10 04.10.12.422951 PM +08:00
But, when i run the same command using SQL developer, its display different time:-
SQL> select systimestamp from dual;
14-APR-10 05.10.12.422951 PM +09:00
Why it is different ?.
This is my OS time:-
nv2am:/acec/nv2am/data> date
Wed Apr 14 16:09:15 PST 2010
Edited by: baharin on Apr 14, 2010 1:30 AM -
JVM timezone property in websphere
If I set the user.timezone system property for an application deployed in Websphere appserver, does it affect any other apps using the same JVM? Anyone, please let me know. I set this system property using Websphere Admin console. The steps are below.
Start the administrative console.
In the topology tree, expand Servers and click Application Servers.
Click the name of the application server for which you want to set the time zone.
On the application server page, click Process Definition.
On the Process Definition page, click Java Virtual Machine.
On the Java Virtual Machine page, click Custom Properties.
On the Custom Properties page, click New.
Specify user.timezone in the Name field and timezone in the Value field, where timezone is the supported value for your time zone.
Click Apply.
Save the configuration
Thanks in advance!!> can fail if the user does not have the rights to access the JVMs parameter.
Not sure what that means but I am pretty sure it is false. Perhaps it was in reference to a customer security manager.
f) You could find and fix the JVM code itself. Easier of course if it is a java code bug rather than a binary bug. If java code only then you could use a bootclass loader option to put your fix in place when the VM starts.
But I would probably go for a. -
Oracle 8i version 8.1.5 personal edition, uses a JVM called
Aurora JVM. Is it possible for me to configure oracle to use
Sun's implementation instead of Aurora?Look at Note:373601.1 on metalink
Unable to Open Discoverer Plus And Oracle Application At The Same Time -
How to save XML timeformat to oracle without loosing "timezone-compensati"
I hope i post this in the correct forum and I provide enough info for you to understand what I'm looking for...
Some time ago I got some help here about how to read a incoming XML-file and insert data into a table, where the Element-tag describes the tablename and the Attributes describes the column-names. See post : [ https://forums.oracle.com/forums/message.jspa?messageID=10284116#10284116]
During testing we discovered that on some incoming messages there where Date-fields, the date/time-values has the format '2012-04-19T14:00:05+02:00' which causing us problems when saving the value to our oracle table.
This is (simplifyed) how the message look like:
<?xml version="1.0" encoding="UTF-8"?>
<PickResult>
<Metadata>
<TransactionIdentity>"00000011"</TransactionIdentity>
<MessageTypeIdentity>"MyMessageType"</MessageTypeIdentity>
<MessagePartyIdentity>"02"</MessagePartyIdentity>
</Metadata>
<Data>
<PickResult PickingTime="2012-04-19T14:00:05+02:00" ProductDate="2012-04-20" Picker="MyEmployee" />
</Data>
</PickResult
I've tried different types on the PICKINGTIME-column like "DATE", "TIMESTAMP" and "TIMESTAMP(6) WITH LOCAL TIME ZONE" but I still get oracle errors like
"ORA-01858: a non-numeric character was found where a numeric was expected"
"ORA-01861: literal does not match format string"
when I run the statement.
If I declare the PICKINGTIME-column as "DATE" it works without errors but it doesn't add the two extra hours(+02:00) to the time which is very importent since the Picking time must be accurate.
This is the how the "final" Insert-statement look like which I need to modify somehow to make it accept the timeformat from the message:
INSERT INTO PickResult( PICKER, PICKINGTIME, PRODUCTDATE)
SELECT PICKER, PICKINGTIME, PRODUCTDATE
FROM XMLTable('/PickResult/Data/descendant::PickResult'
PASSING :1 COLUMNS
PICKER varchar2(35) path '@PICKER'
, PICKINGTIME date path '@PICKINGTIME'
, PRODUCTDATE date path '@PRODUCTDATE')
Can anyone provide me with some input how to solve this problem because I'm totally stucked...
ps. please forgive me for my poor "technical" english.
//PeterHi,
PickingTime="2012-04-19T14:00:05+02:00"xs:dateTime format is mapped to TIMESTAMP (WITH TIME ZONE) in SQL.
This works for me :
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
PL/SQL Release 10.2.0.5.0 - Production
CORE 10.2.0.5.0 Production
TNS for 64-bit Windows: Version 10.2.0.5.0 - Production
NLSRTL Version 10.2.0.5.0 - Production
SQL>
SQL> SELECT PICKER, PICKINGTIME, PRODUCTDATE
2 FROM XMLTable('/PickResult/Data/descendant::PickResult'
3 PASSING xmltype('<?xml version="1.0" encoding="UTF-8"?>
4 <PickResult>
5 <Metadata>
6 <TransactionIdentity>"00000011"</TransactionIdentity>
7 <MessageTypeIdentity>"MyMessageType"</MessageTypeIdentity>
8 <MessagePartyIdentity>"02"</MessagePartyIdentity>
9 </Metadata>
10 <Data>
11 <PickResult PickingTime="2012-04-19T14:00:05+02:00" ProductDate="2012-04-20" Picker="MyEmployee" />
12 </Data>
13 </PickResult>')
14 COLUMNS
15 PICKER varchar2(35) path '@Picker'
16 , PICKINGTIME timestamp with time zone path '@PickingTime'
17 , PRODUCTDATE date path '@ProductDate'
18 )
19 ;
PICKER PICKINGTIME PRODUCTDATE
MyEmployee 19/04/12 14:00:05,000000 +02:00 20/04/2012 -
Oracle Database JVM related sessions at JavaOne/OOW
https://oracleus.activeevents.com/2013/connect/sessionDetail.ww?SESSION_ID=8601
https://oracleus.activeevents.com/2013/connect/sessionDetail.ww?SESSION_ID=9240
https://oracleus.activeevents.com/2013/connect/sessionDetail.ww?SESSION_ID=10015
https://oracleus.activeevents.com/2013/connect/sessionDetail.ww?SESSION_ID=11053
See all my JavaOne/OOW sessions @ 360 Degree DB Programming & Analytics: My Sessions at Oracle OpenWorld and JavaOne 2013for more updates to schedule check out the main Spatial page.
http://www.oracle.com/technology/products/spatial
Maybe you are looking for
-
How do I enable the extension group on reader
I updated my laptop to the 8.1 windows software. Since then my 'Extension' bar is missing in Reader. How can. I get it back?
-
Guys, I have a situation where i need to do late arriving dimensions. This is the process flow which iam trying to do:- 1)Load the data into load tables from files(they contain both fact/reference data) 2)load the data into dimension tables from load
-
Problem mit Photoshop Album Starteredition
Hallo, ich habe bei der letzten Aktualisierung auch das obige Programm ausgewählt und installiert. Jetzt habe ich allerdings das Problem, dass wenn ich im Windows Explorer eine WAV-,MP3-,AVI- oder MPG-Datei auswähle, diese mit Adobe geöffnet wird. We
-
I am having trouble syncing all of my music to my new iPhone 3G. Since the harddrive on my MacBook is small (60 GB), I keep some of my favorite music there and some of it is kept on an external HD. All of my music shows in my iTunes library and as lo
-
JIMI - Save as GIF, impossible?
I wish to write an application that, eventually, needs to save a series of images as an animated GIF. I read that JIMI can do such a thing, but have found that there is no encoder for GIF, only a decoder. Is it impossible to save as GIF with JIMI? If