Oracle std report to fetch all the backordered lines from the sales orders

Hello Experts,
Is there any standard Oracle report which can provide us the details of all the backordered lines in all the sales orders? Pls advise.
Regards,
Vidhi

There is a report called "Backorder Detail Report" under Shipping Execution.

Similar Messages

Calling VA01 from Report,how to get the Sales Order No when Back.

Hi all,
I have a requirement of calling va01 from the report and have done that using
did recording ...&
call transaction va01 using bdcdata.
but my problem is when back from that trasaction i have to get the sales order that is created . Is it possible to retrieve that value from va01 .i am unable to get . anyone pls share

Use the addition MESSAGES INTO itab with call transaction va01 using bdcdata.
Effect of MESSAGES INTO itab:
Using this addition, all the messages sent during batch input processing are stored in an internal table itab of the type BDCMSGCOLL from the ABAP Dictionary.
If the call transaction is successful then retrieve the last message from itab and then in any field among MSGV1,MSGV2,MSGV3,MSGV4 of itab u will get the document no.
And when doing the call transaction pl. choose update mode as 'S' or 'L'.
Regards,
Joy.

Sales Order Report Showing Cost on the Sales Order & total invoice dollars

I am looking for a report in SAP that shows you the Sales Order number, the cost on the sales order (NOT the average cost) the actual cost on the sales order detail line and then the total invoice dollars in month to date and year to date?
Thanks,
Linda

You can use T.code: COOIS if Product Costing has been configured for MTO scenario whcih gives the costing details.
You can also use To.code: KE30 if CO-PA implemented.
but if you want to link with billing, Please search for any reports in Sales information system.
One more you can create a ABAP Query Report using T.code: SQVI
Regards,
Anbu

Report which gives all the manullay released salesorders - VKM2

User want to run a selected date range to run a report, to lists all the sales orders that have been manually released via T-code: VKM2
But I can not find the related display variant, or do you have any other related report ?
Thanks
Srikanth

Hi,
You dont have a standard report to see the list of sales orders which are credit released. However you can find out the same from the field VBUK-CMGST and you can find out all the sales orders whose status is C or D.
Hope this helps

Standar report to see the sale order stock collectively

Dear Gurus,
Is there any standard report available to see the sales order stock collectively.
I can see the sale order stock in MMBE. But disadvantage is, at a time i can see a single material only.
I would like to see the sale order stock for more than 1 materials.
For example MB52- Collective inventory stock can be seen

Dear,
You could check sales order stock using MB52. Tick Also Select Special Stock and fill special stock indicator ='E'
You can check in MMBE t.code by enter material and execute....& see ur slaes order stock in On-order stock segment also try in CO09
Regards,
R.Brahmankar

Capture the Sales order cost

Dear All,
      My client business process is trading business , based on the sales order they will create the purchase order,
here I want to capture all the sales order related costs and also based on the sales order those   purchase orders cost also I want to capture
Anybody could you please give me your input
Thanks & Regards
Sri

Thanks for your reply ajay
I will give you more inputs on this issue
In my trading business, against the sales order I am going raise the purchase order
Here two different requirement
Sales order wise Profitability – Here I have given the solution in COPA report
I want to capture Sales order and related purchase order expenses like bank charges, interest, commission, transport, port charges, duty   and exchange gain or loss everything
So in my 2nd   query shall I go with account assignment category as E,
or shall I create each sales as separate internal order
or when I book the expenses itself shall I capture the cost through as copa characteristic
need Some more clarity
Thanks
Sri

Flow of condition records in the sale order

Dear All,
I had created two condition types (ex : RL1 & RL2) for Royalty exp and Royalty Payable, these are Required Fields. so that whenever user create the Sale order those condition types amounts are automatically fetch into the sale Order with plant and material combination through condition record.
                                    But the requirement is user will maintain condition record for the first condition type (ex : RL1) only, at the time of creating the Sale order the second condition type(RL2) amount should automatically flow into the sale order along with the first condition record (RL1). i.e., what ever the amount maintained in the first condition record(RL1) should copy into the second condition type(RL2).
Note : User will not maintain condition record for the Condition type (RL2).
                             Other than Condition supplement, Please suggest me how to meet the Client requirement.
Awaiting Reply,
Thanks&Regards,
Lakshmi

Hi,
First Condition Type (RL1) is a surcharge and   Condition type (RL2) is discount. after placing RL1 condition in RL2 condition element details screen as a Ref.Condition Type. I maintained the condition record for RL1, in the Sales order second condition Type is automatically picking with positive value(where as second condition RL2 is a discount) that should not it has to show the negative value .
Give me suggestions to meet the requirement.
Regards,
Lakshmi narayana

Need IDOC and segment for mappping the sales order number

Hi,
we need the IDOC name and segment for mapping the sales order number created by oracle in sap for transaction VA01.
Whether the sales order number created by Oracle can be used to create the sales order in sap using the idoc ACC_SALES_ORDER01?
. If we can do,then what is the segment and field for the sales order number in the idoc ?
Please reply asap it's very urgent
Thanks
Edited by: suresh kumar nandhagopal on May 16, 2008 12:07 PM

Hi,
IDOC for sales order is ORDERS05. Segment E1EDKA1, for field go to SE11 and enter E1EDKA1 to find field for sales order.
Cheers.
...Reward if useful.

When will EK02 appear in the Sales Order?? For different planning strategy?

Hi Experts,
In our SAP system ,when you create a sales order with a material which planning strategy is
50 Planning without final assembly (MTO) , in the item detail screen , on the "Conditions"
TAB, we will see condition type EK02 and its value.
But when I create a sales order with a material which planning strategy is 40 Planning with
final assembly (MTS),in the item detail screen , on the "Conditions" TAB, condition type
EK02 will not appear.
I have checked the customizing of our SAP system ,as follows:
For planning strategy 50, the Requirements class is "045"(MTO val. with cons.),and on the
configuration screen of Requirements class,we see "Condition type for copying costs from
line items" (CndTyLineItems) is null ,no value ,not "EK02".
And for planning strategy 50,the the Requirements class is "050"(Warehouse consumpt.) and
and on the configuration screen of Requirements class,we see "Condition type for copying
costs from line items" (CndTyLineItems) is also null ,no value ,not "EK02".
And on the configuration screen of Sale Order Type screen(VOV8), we see "Condition type for
copying costs from line items" (CndTyLineItems) is "EK02" for all the sales order type we
have used.
So I am very confused.
Why material with planning strategy 40 there is no EK02 in the sales order?
Why material with planning strategy 50 there is EK02 in the sales order?
Where is the EK02 come from? The requriement class ? Or the Salse order Type?
Are there any other customizing for Condition type EK02 determination?
Thanks very for any reply!!

Hi,
In MTO you will create Process order.
And to Produce a Item you use Sub components that is Raw material
That raw material cost is EK02 which you maintain in the Material Master - Accounting View 1.
You can see cost in the Process Order also .
Note : Dont post same in different posts

Block the sale order on item level

by default,how to block the sale order on item level?
where do i configure the setting in system?
hhh

Dear,
Goto the Transaction code MASS and enter the OBJECT TYPE as BUS2032 and Hit enter.
Now in the next screen select the table for SALES ORDER ITEM DATA and in the fileds select billing block mass with field
MASSSDHEAD_S-FAKSK and execute, it will lead to another screen in which you can enter all the Sales documents and execute, there u can assign billing block for all the Items at a time
or
Sit with ABAPer and develop a BDC program (Hardly take 1 hour). This will be for future as well.
Just pass a file having all the sales order number, execute it in background.
When system is providing automatic way then why to go manual?
Please check this and revert back.
Regards
AJIT K SINGH

Summary report to show all the software components and version installed

We are using 64bit Windows 2003 and Hyperion Planning and Essbase in 2 separate servers. I am not sure whether Windows can have a summary report to show all the software components and version installed and show it is 32bit or 64bit version installed?
Thanks!

Refer steps here to delete SC file.:
http://support.apple.com/kb/TS2363
Then proceed to repair your QuickTime. START / CONTROL PANEL / ADD n REMOVE PROGRAMS / highlight QUICKTIME and click CHANGE then REPAIR.

Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in oracle and yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.

Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in Oracle and yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.

Thanks for your advise.
However, I missed to mention that we have two set of users One is for Finished Goods and another for Spares.
Only Spares users need to be prevented from creating Direct/Manual Sales Orders in Oracle.
As you suggested, if this will be done at Form level, that may Disallow FG users also to create Manula Sales Orders which should not be the case.
Further, I tried to test one scenario through Processing Constraints but it did not work.
Application
OM
Validation Type
Entity
Temp
Short Name
TBL
Validation Semantics
Created By
Equal To
User(Myself)
Processing Cosntraint
Application
OM
Entity
Order Header
Constraint
Operation
User Action
Create
Not Allowed
Conditions
Group
Scope
Validation Entity
Record Set
Validation Template
101
Any
Order Header
Order
Above Created
Please advise.

How can I fetch all the PCD roles from EP!

Hello,
I need to fetch all the available pcd roles in EP. Right now I am trying to fetch pcd roles under Portal Content directory. I need a clarification whether this is the only place the pcd roles are available or is there any other location where rest of the pcd roles are available?
Thanks in advance,
Prashanth V Swamy

Hi Prasanth,
See the code below to retrieve all the pcd roles.
public List getPCDContents(IPortalComponentRequest request) throws Exception{
               try{
                    Hashtable env = new Hashtable();
                    env.put(IPcdContext.SECURITY_PRINCIPAL, request.getUser());
                    env.put(Context.INITIAL_CONTEXT_FACTORY,IPcdContext.PCD_INITIAL_CONTEXT_FACTORY);
                    env.put(com.sap.portal.directory.Constants.REQUESTED_ASPECT, PcmConstants.ASPECT_SEMANTICS);
                    InitialContext ctx = null;
                    DirContext dirCtx;
                    List roleList = null;
                    ctx = new InitialContext(env);
                    dirCtx = (DirContext) ctx.lookup("pcd:portal_content/");
                    PcdSearchControls pcdSearchControls = new PcdSearchControls();
                    pcdSearchControls.setReturningObjFlag(false);
                    pcdSearchControls.setSearchScope(
                         PcdSearchControls.SUBTREE_WITH_UNIT_ROOTS_SCOPE);
                    dirCtx.addToEnvironment(
                         Constants.APPLY_ASPECT_TO_CONTEXTS,
                         Constants.APPLY_ASPECT_TO_CONTEXTS);
                    NamingEnumeration ne =
                         dirCtx.search("","(com.sap.portal.pcd.gl.ObjectClass=com.sapportals.portal.role)",
                              pcdSearchControls);
                    iViewList = new ArrayList();
                    while (ne.hasMoreElements()) {
                         IPcdSearchResult searchResult =
                              (IPcdSearchResult) ne.nextElement();
                         String location = "pcd:portal_content/" + searchResult.getName();
                         //Get the full pcd path of the iview.
                         roleList.add(location);
                    return iViewList;
               }catch(Exception e ){
                    throw new Exception(e);
Hope it helps.
Regards,
Karthick

Report to display all the contacts of an opportunity.

Hello,
I have a requirement, can we create a report which displays all the contacts of an opportunity apart from primary contact.
Any inputs on the same will be appreciatable. TIA
Edited by: 1004233 on May 6, 2013 12:16 AM
Edited by: 1004233 on May 6, 2013 3:28 AM
Edited by: 1004233 on May 6, 2013 3:28 AM

Hey Aveek;
   Try this, which will get the most recent one. You would just need to change it to loop at the edids records to get at them all...
      TABLES: *edidc, *edids, *t100.
      DATA: wf_string type string.
      CLEAR *edids.
      SELECT SINGLE *
         INTO *edids
         FROM edids
         WHERE docnum = *edidc-docnum
           AND status = '51'.
      SELECT SINGLE text
         INTO *t100-text
         FROM t100
         WHERE sprsl = 'EN'
           AND arbgb = *edids-stamid
           AND msgnr = *edids-stamno.
         CLEAR wf_string.
      MOVE *edids-stapa1 TO wf_string.
      REPLACE '&' WITH wf_string INTO *t100-text.
      IF sy-subrc EQ 0.
        CLEAR wf_string.
        MOVE *edids-stapa2 TO wf_string.
        REPLACE '&' WITH wf_string INTO *t100-text.
        IF sy-subrc EQ 0.
          CLEAR wf_string.
          MOVE *edids-stapa3 TO wf_string.
          REPLACE '&' WITH wf_string INTO *t100-text.
          IF sy-subrc EQ 0.
            CLEAR wf_string.
            MOVE *edids-stapa4 TO wf_string.
            REPLACE '&' WITH wf_string INTO *t100-text.
          ENDIF.
        ENDIF.
      ENDIF.
      A little sloppy (OK, alot!), but it gets the job done...
Cheers,
John

People Picker JS Control not fetching all the users...

Hi,
I am using Java Script people picker control. It fetching information for users but not all. I used following code block to get the control working. Why is not fetching all the users?? Where as OOTB people picker fetches same user. This does not make sense.
My environment is SharePoint online.
// Run your custom code when the DOM is ready.
$(document).ready(function () {
// Specify the unique ID of the DOM element where the
// picker will render.
initializePeoplePicker('peoplePickerDiv');
// Render and initialize the client-side People Picker.
function initializePeoplePicker(peoplePickerElementId) {
// Create a schema to store picker properties, and set the properties.
var schema = {};
schema['PrincipalAccountType'] = 'User,DL,SecGroup,SPGroup';
schema['SearchPrincipalSource'] = 15;
schema['ResolvePrincipalSource'] = 15;
schema['AllowMultipleValues'] = true;
schema['MaximumEntitySuggestions'] = 50;
schema['Width'] = '280px';
// Render and initialize the picker.
// Pass the ID of the DOM element that contains the picker, an array of initial
// PickerEntity objects to set the picker value, and a schema that defines
// picker properties.
this.SPClientPeoplePicker_InitStandaloneControlWrapper(peoplePickerElementId, null, schema);
Here is the link from Microsoft explaining it.
How to: Use the client-side People Picker control in SharePoint-hosted apps: https://msdn.microsoft.com/en-us/library/office/jj713593.aspx
Appreciate any help or workaround here.
Thanks.

Hi,
In my case im usign customize people picker. it is better to use in delelopement since you have the control and customization.
I have used select2 (https://select2.github.io/examples.html) drop down control and create a people picker
You can use the same REST call to populate data.
function initApproversPicker(success, fail) {
var data = { results: [] };
var executor = new SP.RequestExecutor($$.getAppWebUrlUrl());
executor.executeAsync(
url: $$.getAppWebUrlUrl() + "/_api/web/siteusers",
method: "GET",
contentType: "application/json;odata=verbose",
headers: { "Accept": "application/json; odata=verbose" },
success: function (dt) {
$.each(JSON.parse(dt.body).d.results, function (i, ele) {
data.results.push({ id: ele.Id, text: ele.Title });
executor.executeAsync(
url: $$.getAppWebUrlUrl() + "/_api/web/sitegroups",
method: "GET",
contentType: "application/json;odata=verbose",
headers: { "Accept": "application/json; odata=verbose" },
success: function (dt) {
$.each(JSON.parse(dt.body).d.results, function (i, ele) {
data.results.push({ id: ele.Id, text: ele.Title });
$("#WFApprovers").select2({ data: data, multiple: true });
if (success) {
success();
error: function (d, errorCode, errorMessage) {
if (fail) {
fail();
utils.log(errorMessage);
error: function (d, errorCode, errorMessage) {
utils.log(errorMessage);
Melick Rajee http://melick-rajee.blogspot.com

Oracle std report to fetch all the backordered lines from the sales orders

Similar Messages

Maybe you are looking for