Oracle Weblogic Server Installation using the user "oracle"

Hi,
I installed two instances of weblogic server for FMW 11g on linux x86-64. One was with the user oracle and other was with the user orawls, both belonging to the group oinstall. I had installed Admin Server and created managed servers soa_server1 and bam_server1. I have issues in starting up the instance with oracle user and the instance with the orawls user starts fine. I have a separate thread going on for that issue.
I just wanted to know if there were any existing known issues when installing the WLS as oracle user ?
Cheers,
- AR

I have no issues with the oracle user. I do it all the time.
Which thread are you referring to?
--olaf

Similar Messages

Configuring Oracle Application Server to use a user friendly url

Hi All,
I am having trouble configuring the apache httpd.conf file within an applicaton server to be able to use user-friendly urls for the infrastructure identity management tools server. I also need this for security reasons as well as hardware reasons - loadbalancing.
At the moment I have a standard setup, whereby the sso application server is using port 7777. I would like the user not to enter the port, but to enter just a standard url, like http://login.<company>.com.au, so that if the user needs to modify oid using the oiddas web application, they can enter something like http://login.<company>.com.au/oiddas/ rather than http://<machine host name>:7777/oiddas/. This would also be used by portal for sso logins.
From the standard installation, Apache was configured as follows:
Port 7777
Listen 7777
ServerName <machine host name>
DocumentRoot <root document folder>
Now reading the documentation from the Oracle Application Server Installation notes for the Http Server, they document how to do this (in the loadbalancer section - this will eventually be used in the hardware setup):
Port 80
Listen 7777
Listen 80
# Virtual Hosts
# This section is mandatory for URLs that are generated by
# the PL/SQL packages of the Oracle Portal and various other components
# These entries dictate that the server should listen on port
# 7777, but will assert that it is using port 80, so that
# self-referential URLs generated specify www.oracle.com:80
# This will create URLs that are valid for the browser since
# the browser does not directly see the host server.oracle.com.
NameVirtualHost <machine ip>:7777
<VirtualHost <nameofmachine>:7777>
ServerName login.<company>.com.au
Port 80
</VirtualHost>
# Since the previous virtual host entry will cause all links
# generated by the Oracle Portal to use port 80, the server.company.com
# server needs to listen on 80 as well since the Parallel Page
# Engine will make connection requests to Port 80 to request the
# portlets.
NameVirtualHost <machine ip>:80
<VirtualHost <nameofmachine>:80>
ServerName login.<company>.com.au
Port 80
<VirtualHost>
Note that I used slightly different names for the url's rather than the oracle names www.oracle.com and server.oracle.com
Now after applying this, I noticed not only could I not go to the oiddas from the original machine name, but also couldnt go there from the new machine name.
Also I was not even able to go to the standard index page whereby you can go to the enterprise manager for the application server, from either names.
The following urls provide me with "The Page Cannot Be Displayed" error message:
http://login.<company>.com.au:7777/
http://<nameofmachine>:7777/
The following urls provide me with "Page Under Construction" error message:
http://login.<company>.com.au/
http://<nameofmachine>/
Could someone please tell me why this is the case, considering I am using the installation procedures Oracle has published within the Oracle Http Server Admistrators Guide (http://download-west.oracle.com/docs/cd/B14099_19/web.1012/b14007/netconf.htm#sthref379).
Cheers
Rodney

Hi Rondey,
Ik think that I can see your probleem.
Just change the following line at your httpd.conf, then restart the component.
First of all if the port is installed with nr. 7777. then the listen process will be on port 7778
the second thing is just try to do the following steps
((Port 80 to Port 7777)))
Listen 7778
%%%% In loadbalancer section %%%%%%
just add the following lines
Listen 80
Listen 8103
Listen 8102
NameVirtualHost *
NameVirtualHost *:8103 or 80
If you want to use this ports (8103 or 8102) for other site (url), then
<VirtualHost *:80>
ServerName <machine ip> or (host name)
Hear from U,
Regards,
Hamdy

How do I get the WebLogic server to use the XMLRegistry?

I'm using WebLogic 7.0.2, and I want to use the Apache TransformerFactory and DocumentBuilderFactory
instead of the default weblogic.* classes. I've found the documentation, where
I define an XML Registry as follows (snippet from my config.xml)...
<Server ListenAddress="####" ListenPort="####" Name="myserver"
NativeIOEnabled="true" ServerVersion="7.0.2.0"
StdoutEnabled="true" StdoutSeverityLevel="8"
StuckThreadMaxTime="14400"
XMLEntityCache="XMLCacheMBean_myserver" XMLRegistry="CT XML Registry">
<COM Name="myserver"/>
<ExecuteQueue Name="default" ThreadCount="15"/>
<IIOP Name="myserver"/>
<JTAMigratableTarget Cluster="" Name="myserver" UserPreferredServer="myserver"/>
<JTARecoveryService Name="myserver"/>
<KernelDebug Name="myserver"/>
<Log FileName="myserver/myserver.log" Name="myserver"/>
<SSL Enabled="true" HostnameVerificationIgnored="true"
ListenPort="###" Name="myserver"
ServerCertificateFileName="democert.pem"
ServerPrivateKeyAlias="demokey" ServerPrivateKeyPassPhrase="{3DES}gAuVwsR68oAlLdIfO1PAtw=="/>
<ServerDebug Name="myserver"/>
<ServerStart Name="myserver"/>
<WebServer DefaultWebApp="DefaultWebApp"
LogFileName="myserver/access.log" LoggingEnabled="true" Name="myserver"/>
</Server>
<XMLEntityCache Name="XMLCacheMBean_myserver"/>
<XMLRegistry
DocumentBuilderFactory="org.apache.xerces.jaxp.DocumentBuilderFactoryImpl"
Name="CT XML Registry"
SAXParserFactory="org.apache.xerces.jaxp.SAXParserFactoryImpl"
TransformerFactory="org.apache.xalan.processor.TransformerFactoryImpl"
WhenToCache="cache-on-reference"/>
I've played aorund with xercesImpl being in and out of classpaths, etc. But no
matter what I do, calls to TransformerFactory.newInstance creates an instance
of weblogic.xml.jaxp.RegistrySAXTransformerFactory and DocumentBuilderFactory.newInstance()
creates an instance of weblogic.xml.jaxp.RegistryDocumentBuilderFactory.
I don't want to use these classes, and supposedly I can control which classes
I will use, but it's not working for me. Has anyone been able to get this working?
Is there anything else that I'm missing?
Thanks,
Ed

I was unable to use the XMLRegistry touse the Xerces2 libraries with WebLogic 7.
I did find in WebLogic 7 doco that the latest release of Xerces that it would
internally support was 1.4.4 (http://e-docs.bea.com/wls/docs70/xml/xml_admin.html#1066271).
If I wanted to use this version of Xerces, I would need to use WebLogic 8. This
is not an option for me at this stage.
So, I used this approach. When starting the WebLogic server, you can assign ClassPath
entries to an environment variable called PRE_CLASSPATH. This will prepend the
class path used by the App Container's JVM with the values in the variable. I
added the xercesImpl and xalan jars to this entry.
Because the WebLogic class loaders will always defer to the parent class loader,
it will check this class path first. So now I can directly instantiate the apach
implementation classes (typecasting them back to their API interface definitions)
and use them within the container.
"Ed Hillmann" <[email protected]> wrote:
>
I'm using WebLogic 7.0.2, and I want to use the Apache TransformerFactory
and DocumentBuilderFactory
instead of the default weblogic.* classes. I've found the documentation,
where
I define an XML Registry as follows (snippet from my config.xml)...
<Server ListenAddress="####" ListenPort="####" Name="myserver"
NativeIOEnabled="true" ServerVersion="7.0.2.0"
StdoutEnabled="true" StdoutSeverityLevel="8"
StuckThreadMaxTime="14400"
XMLEntityCache="XMLCacheMBean_myserver" XMLRegistry="CT XML Registry">
<COM Name="myserver"/>
<ExecuteQueue Name="default" ThreadCount="15"/>
<IIOP Name="myserver"/>
<JTAMigratableTarget Cluster="" Name="myserver" UserPreferredServer="myserver"/>
<JTARecoveryService Name="myserver"/>
<KernelDebug Name="myserver"/>
<Log FileName="myserver/myserver.log" Name="myserver"/>
<SSL Enabled="true" HostnameVerificationIgnored="true"
ListenPort="###" Name="myserver"
ServerCertificateFileName="democert.pem"
ServerPrivateKeyAlias="demokey" ServerPrivateKeyPassPhrase="{3DES}gAuVwsR68oAlLdIfO1PAtw=="/>
<ServerDebug Name="myserver"/>
<ServerStart Name="myserver"/>
<WebServer DefaultWebApp="DefaultWebApp"
LogFileName="myserver/access.log" LoggingEnabled="true" Name="myserver"/>
</Server>
<XMLEntityCache Name="XMLCacheMBean_myserver"/>
<XMLRegistry
DocumentBuilderFactory="org.apache.xerces.jaxp.DocumentBuilderFactoryImpl"
Name="CT XML Registry"
SAXParserFactory="org.apache.xerces.jaxp.SAXParserFactoryImpl"
TransformerFactory="org.apache.xalan.processor.TransformerFactoryImpl"
WhenToCache="cache-on-reference"/>
I've played aorund with xercesImpl being in and out of classpaths, etc.
But no
matter what I do, calls to TransformerFactory.newInstance creates an
instance
of weblogic.xml.jaxp.RegistrySAXTransformerFactory and DocumentBuilderFactory.newInstance()
creates an instance of weblogic.xml.jaxp.RegistryDocumentBuilderFactory.
I don't want to use these classes, and supposedly I can control which
classes
I will use, but it's not working for me. Has anyone been able to get
this working?
Is there anything else that I'm missing?
Thanks,
Ed

Oracle JDBC Driver too old in Oracle WebLogic Server 10.3

I check oracle jdbc driver bundles in the Oracle WebLogic Server 10.3
The version is too old,and current version is:
Oracle Database 11g Release 1 (11.1.0.7.0) JDBC Drivers
The question is:
Could we replace the old ojdbc6.jar with the current one (11.1.0.7.0)?
Thanks in advance!

Yes, but be sure the new driver provides the classes registered in Administration Console that are provided by ojdbc6.jar when you configure jdbc resources to Oracle database

Oracle WebLogic Server 10gR3 Installation Query

I have Windows 7 (64-bit OS) & i'd like to install Oracle WebLogic Server 10gR3 (i know it's not the newest).
Would you please provide me with a link for downloading the suitable Weblogic Server package & net installer?

Hi
Yes, you should download Weblogic Server 10.3.3 Generic Installer which is like a .JAR file (sometimes .zip but rename as .jar file). In the below link, for weblogic server 10.3.3 row, on right side, click on + icon (See All Files). There in the last column you will see 64 bit installer (wls1033_generic.jar).
http://www.oracle.com/technetwork/middleware/ias/downloads/wls-main-097127.html
Just refer online docs for 64 bit installation. Make sure that first you download 64 bit jdk (Sun or JRockit). Set this in PATH. When you run java -version, it should refer this 64 bit jdk. Then run command like java -d64 -jar wls1033_generic.jar (if -d64 do not work, try -D64). Basically generic installer for 64 bit will not have any JDK built in. You have to download it first and then use it for installing weblogic.
Thanks
Ravi Jegga

Can i make use of same wallet for both Oracle Weblogic Server and OHS

We have configured an setup where Oracle HTTP Server 11g is configured as proxy server which will loadbalance the request to the cluster managed server.
We have created the wallet and configured SSL for Oracle Weblogic server. Now we want to configure SSL for OHS (Oracle HTTP Server ) .
Can we make use of same wallet.
For creating wallet i have used keytool utility and for certificate Microsoft CA.

10/04/15 11:47:00 Start process
/apps/weblogic/Oracle_11g/ohs/bin/apachectl startssl: execing httpd
Syntax error on line 70 of /apps/weblogic/Oracle_11g/instances/instance1/config/OHS/ohs1/ssl.conf:
Invalid command 'SSLCertificateFile', perhaps misspelled or defined by a module not included in the server configuration
When i am using separate wallet and that too using oracle wallet manager it is working fine .. But with keytool utility it is not working...
When used keytool it gave below error
[2010-04-13T11:17:22.4873+04:00] [OHS] [ERROR:32] [OHS-2052] [mod_ssl.c] [host_id: dxb01-sol-intellectapp] [host_addr: 10.240
.245.41] [pid: 22731] [tid: 1] [user: root] [VirtualHost: dxb01-sol-intellectapp:4443] server dxb01-sol-intellectapp:4443 ha
s an invalid wallet: file:/export/home/weblogic/ohsssl :: 28759
[2010-04-13T11:17:22.4874+04:00] [OHS] [ERROR:32] [OHS-2171] [mod_ssl.c] [host_id: dxb01-sol-intellectapp] [host_addr: 10.240
.245.41] [pid: 22731] [tid: 1] [user: root] [VirtualHost: dxb01-sol-intellectapp:4443] NZ Library Error: Failed to open the
wallet [Hint: incorrect path, incorrect password, bad wallet, ...]
As per hint , the path was correct , wallet was perferct , no where i was passing the password. So thought of passing password for keytool and used SSLWalletPassword key , but later found that it is depricated ...
That means we have to use oracle wallet manager where we can enable auto login ...
Please Advice if i am wrong..

Not able to create a Volume Group in the oracle VM server installation

Hi,
I am installing Oracle VM server. In the installtion ( Partition time ), i click on create custom layout and i want to create a / partition as a logical volumn under volume group. But there is no option to create a Volume group actually. So can anybody help how to create a volume group actually and how to create a logical volume under volume group.

user10274248 wrote:
So can anybody help how to create a volume group actually and how to create a logical volume under volume group.LVM is not recommended in Dom0, which is why support for LVM has been removed from the installer. LVM is not cluster aware and does not support write barriers, both of which are important for a filesystem that is used for storing file-backed disk images.

I cannot log into oracle using the user scott

I installed oracle, but I did not go through the underlined step. I am not sure if I skipped or it was not there during the installation
The Database Configuration Assistant will provide installation summary
and list the accounts that are unlocked. It will ask you for password management. Sys
and System accounts would be already unlocked. Unlock HR and Scott accounts,
and for these two accounts also specify the same password that you had given before.
When I test logging into Oracle using the user Scott, it shuts down.
I am using windows 7, and I installed Oracle Database 10g Release 2 (10.2.0.1.0)
Enterprise/Standard Edition for Microsoft Windows (32-bit)
How can I log into oracle using the user Scott?

Hi,
Welcome to the forum,
After installing Oracle 10g SCOTT user will be in locked, you should unlock it.
Login as sysdba using the below command
sqlplus sys as sysdba
password:<ur password>
after connecting as sysdba use the below command to unlock the SCOTT user
ALTER USER SCOTT ACCOUNT UNLOCK;
Now connect as scott you will bw able to connect.
hari

Automating Oracle Server Installation using response file

I am automating Oracle Server Installation using response file. No Installer page should be displayed, except 'Optional Config Tools' page at the end of the installation showing the list of optional configuration tools e.g Net Configuration Assistant, Database Configuration Assistant, and Intelligent Agent Configuration Assistant. All other pages would not be displayed.
My response file doesn't seem to work this way. During installation, it displays the 'Create Database' page asking whether you want Database Configuration Assistant to be automatically launched at the end of the installation for database creation. How do I prevent this page from displaying, while selecting default option (Yes) using response file?

Provide info about the OS you are using and Oracle version.
-Sri

Deployment Manager Error with Oracle Weblogic Server 10.3.1

I have installed Identity Manager 9.1.0.2 (patch upgraded from 9.1.0.1) on OEL 5.3 64bit and Weblogic 10.3.1
Database:Oracle 11gR2 (remote machine).
**I am aware that IM 9.1.0.2 is not certified on Weblogic 10.3.1 (it is only certified on 10.3),
The installation was successful and OIManager is up and running. Able to create Users, Resources etc. as well.
As part of configuring OIM Connectors tried to Import .xml file using Import option from Deployment Management section as below and the following error was displayed.
"Either your session timed out or you are trying to access a page without logging in".
Did all workarounds like enabling java, changing browsers, restarting machine etc as per the below discussion but in vain.
Deployment Manager Error with Oracle Weblogic Server
Can any one suggest any workaround or solution for this problem.
Or atleast can any one confirm there is no Identity manager available on this date which is compatible with 10.3.1? and cannot be continued further.
Thanks in Advance
Sudheer
Edited by: SudheerPrabhala on Oct 20, 2009 1:26 AM

You are facing this issue because you're using a non certified combination.
Other folks who tried to use OIM in 10.3.1 ended up in the same problem you're facing.

Oracle WebLogic Server 9.2 MP4 - license error

Hi,
I have installed Oracle WebLogic Server 9.2 MP4 on my dev/test server, while starting the server in production mode getting licensed validation error, can any body help on this please.
downloaded 9.2 MP4 from this location (http://www.oracle.com/technetwork/middleware/weblogic/downloads/wls-main-097127.html)
<20-Jun-2011 09:04:38 o'clock BST> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
Unable to start WebLogic Server!
Exception occurred while reading the license file.
Please make sure you have a valid license.bea
file in the BEA home directory associated with this
installation. For more information about the license.bea
file, see the installation guide for the version of the
software you are using at http://e-docs.bea.com.
Thanks

Hi,
I was able to figure out the root cause. I was using the primitive data type "int" for primary key and foreign key for one of the beans in the relationship. After I changed it to "Integer" wrapper type, the issue got resolved.
-Vinod

Silent install of Oracle WebLogic Server 11gR1 (10.3.6) + Coherence + OEPE

Hi, I'm trying to deploy the Oracle WebLogic Server 11R1 (10.3.6) on multiple computers. So I created a silent.xml file to use in my silent installation. The xml file appears to have the correct syntax. But when I launch the command: oepe-wls-indigo-installer-11.1.1.8.0.201110211138-10.3.6-win32.exe -mode=silent -silent_xml="C:\Temp\silent.xml" -log="C:\Temp\silent-install.log", it crash with these 2 errors.
ERROR [readSilentXML] com.bea.plateng.wizard.installer.common.parsers.TemplateParser - Got an error in parsing template.xml!
ERROR [readSilentXML] com.bea.plateng.wizard.installer.silent.tasks.ReadSilentXMLTask - java.lang.NullPointerException
Here's the content of my xml file.
<?xml version="1.0" encoding="UFF-8"?>
<bea-installer>
<input-fields>
<data-value name="BEAHOME" value="C:\Oracle\Middleware_Home" />
<data-value name="WLS_INSTALL_DIR" value="C:\Oracle\Middleware_Home\wlserver_10.3" />
<data-value name="INSTALL_NODE_MANAGER_SERVICE" value="yes" />
<data-value name="NODEMGR_PORT" value="5559" />
<data-value name="INSTALL_SHORTCUT_IN_ALL_USERS_FOLDER" value="yes" />
</input-fields>
</bea-installer>
I need to deploy it to Windows 7 Ent SP1 x64 computers. So I sure like to know what I'm doing wrong?!
Note: I didn't use the value COMPONENT_PATHS because I want to install everything.
Thanks in advance for the help!

I solved the problem myself. I think I was missing my caffeine ;-) <?xml version="1.0" encoding="*UFF-8*"?>
Have a good day!

Oracle Weblogic Server 10.3.3 editions

Hi,
Oracle data sheet http://www.oracle.com/us/products/middleware/application-server/wls-featurematrix-ds-069041.pdf says:
"The Oracle WebLogic application server family includes three offerings; Oracle WebLogic Server *Standard Edition*, Oracle WebLogic Server *Enterprise Edition* and Oracle WebLogic *Suite*."
My question is:
Since during Weblogic installation I don't get asked any questions about install type or choosing edition how do I know which licence should I obtain?
With regards,
Goran

Hi Goran,
From what I know is that WLS has stop using licence.bea file from the version WLS- 10 MP-2, which can also seen in the below link which only provides licence file till WLS 10 MP-1
Topic: BEA WEBLOGIC SERVER PRODUCTS
http://www.oracle.com/us/support/licensecodes/bea/index.html#WLSP
Hence you do not need to worry about the licence.bea file, however to get more information on it I think WLS support team would be the correct people so would ask you to open a ticket with them.
Regards,
Ravish Mody
http://middlewaremagic.com/weblogic/
Come, Join Us and Experience The Magic…

Guide to install Oracle WebLogic Server 10.3 on RedHat 5

Hello buddies!
Can anybody help me to install Oracle WebLogic Server 10.3 on RedHat 5.
If anyone having Guide for that pls share wiith me..

Sure. I always use the generic installer, that way the install is the same on all platforms:
1 download and install JDK 6 update 10
* http://java.sun.com/javase/downloads/index.jsp
2 download generic installer
* http://download.oracle.com/otn/bea/weblogic/server103/server103_generic.jar
3 install
* http://e-docs.bea.com/common/docs103/install/start.html#wp1074027
-Adrian

Oracle Weblogic Server 10.3.5's functionlaity in Windows 7 64bit

Hi Guys,
Oracle Weblogic Server 10.3.5 installs fine in Windows 7 64bit, I'm able to check its functionality in the Installed user.
But If i try to launch the shortcut from any other users, I'm getting an error saying that the application can only be launched as Administrator and its prompting for UAC Credentials. But even when I try to launch it in a Elevated account its asking UAC.
I want to know, since it is an Server application, Whether by default it'll work only in the installed user of the machine.
It will be nice if any of you can get me a Valid document explaining this??
Thanks in advance.

Hello,
Look the following documentation:
http://docs.oracle.com/cd/E23943_01/doc.1111/e14142/prepare.htm#BABBBEBD
Also:
http://docs.oracle.com/cd/E23943_01/doc.1111/e14142/prepare.htm#i1129175
If you want access for all users you must install the software as Administrator and chech the option All Users to get access to the shortcuts from other users.
Hope this helps you :)
Regards
Carlos

Oracle Weblogic Server Installation using the user "oracle"

Similar Messages

Maybe you are looking for