Can i make use of same wallet for both Oracle Weblogic Server and OHS
We have configured an setup where Oracle HTTP Server 11g is configured as proxy server which will loadbalance the request to the cluster managed server.
We have created the wallet and configured SSL for Oracle Weblogic server. Now we want to configure SSL for OHS (Oracle HTTP Server ) .
Can we make use of same wallet.
For creating wallet i have used keytool utility and for certificate Microsoft CA.
10/04/15 11:47:00 Start process
/apps/weblogic/Oracle_11g/ohs/bin/apachectl startssl: execing httpd
Syntax error on line 70 of /apps/weblogic/Oracle_11g/instances/instance1/config/OHS/ohs1/ssl.conf:
Invalid command 'SSLCertificateFile', perhaps misspelled or defined by a module not included in the server configuration
When i am using separate wallet and that too using oracle wallet manager it is working fine .. But with keytool utility it is not working...
When used keytool it gave below error
[2010-04-13T11:17:22.4873+04:00] [OHS] [ERROR:32] [OHS-2052] [mod_ssl.c] [host_id: dxb01-sol-intellectapp] [host_addr: 10.240
.245.41] [pid: 22731] [tid: 1] [user: root] [VirtualHost: dxb01-sol-intellectapp:4443] server dxb01-sol-intellectapp:4443 ha
s an invalid wallet: file:/export/home/weblogic/ohsssl :: 28759
[2010-04-13T11:17:22.4874+04:00] [OHS] [ERROR:32] [OHS-2171] [mod_ssl.c] [host_id: dxb01-sol-intellectapp] [host_addr: 10.240
.245.41] [pid: 22731] [tid: 1] [user: root] [VirtualHost: dxb01-sol-intellectapp:4443] NZ Library Error: Failed to open the
wallet [Hint: incorrect path, incorrect password, bad wallet, ...]
As per hint , the path was correct , wallet was perferct , no where i was passing the password. So thought of passing password for keytool and used SSLWalletPassword key , but later found that it is depricated ...
That means we have to use oracle wallet manager where we can enable auto login ...
Please Advice if i am wrong..
Similar Messages
-
How to Use the same iview for both KM End User and the KM Administrator
Hi friends,
*This is my scenario :* How to Use the same iview for both KM End User and the KM Administrator but with different Context
Menu Options.
i followed these steps but im getting same context menu for both KM End User and the KM Administrator .
Assign the role Content Administrator to the user km_admin. This is needed so that km_admin can change
the presentation settings for the KM Folder u201EReports_kmFolder‟.
Now, login with user km_admin. Navigate to the Km Folder reports_kmFolder through Content Administration
-> Km Content. Click on Details link of the folder reports_kmFolder.
Go To Settings -> Presentation. Click on the tab u201ESettings for You‟-> Click on button u201ESelect Profile‟.
Select the radio button corresponding to u201Elayout Set‟, and choose u201EConsumerExplorer‟ from the dropdown.
Click u201EOK‟.
Select both the check boxes corresponding to Items Affected as shown above, and click u201ESave‟
Now, remove the u201ESuper Administrator‟ role from the user km_admin and login with this user.
How rto resolve this????
Regards,
Prasad.Hello Prasad,
Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
Regards,
Lorcan. -
My Itouch 3rd gen can't be recognize by my computer but when I put my iphone4 its can be recognize I use the same cable for both of them.
Does it charge?
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
If I use the same iCloud account for my ipad and iPhone, will changes I make on one change on the other as well? I'm not sure of the advantage of using teh same iCloud for both devices.
No, it only mirrors changes to synced data. This includes mail, contacts, calendars, reminders, safari bookmarks, notes, iWork documents and data, and photo stream photos (assuming you choose to sync all this data). Changes to iTunes data such as music, apps, podcasts, etc., are not synced using iCloud. In your example, if you delete an app from one device it will remain on the other until deleted there too.
-
When I down load books, can I read them on my iPad and iPhone? I went to open a book on my phone but I got a message that aid something about the bill already associated with an appleid. I use the same id for both devices.
All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.
-
I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.
Hi Jamesdwills,
Welcome to the Support Communities!
If you are using the same Apple ID on both devices, the Game Center profile should be the same.
Check out this information from the iPad User Guide. Try signing out of the Game Center on both devices and then sign back in with the correct Apple ID:
Using Game Center
http://support.apple.com/kb/ht4314
Game Center settings - iPad User Guide
http://help.apple.com/ipad/7/#/iPad9a13d039
Game Center settings
Go to Settings > Game Center, where you can:
Sign out (tap your Apple ID)
Allow invites
Let nearby players find you
Edit your Game Center profile (tap your nickname)
Get friend recommendations from Contacts or Facebook
Specify which notifications you want for Game Center. Go to Settings > Notifications > Game Center. If Game Center doesn’t appear, turn on Notifications.
Change restrictions for Game Center. Go to Settings > General > Restrictions.
Cheers,
- Judy -
I have two Apple TV's one in my living room and one in our bedroom. I purchased a movie series on the tv in the living room but was not able to open on the tv in the bedroom. I am using the same account for both Apple TV's. Can anyone assist?
Wecome to the Apple Community.
For the avoidance of doubt, are you able to play the TV show on the Apple TV on which you bought it and it is a TV show and not a movie is it.
What do you mean can't open it, what exactly happens. -
How do I use 2 apple id's on one mac? I have my apple id on my mac and would like to use the same mac for my wife's phone and ipad?
Correction, thats two itune id's
-
How to use the same keypair for both encrypt/decryprt-SunPKCS#11
Dear All,
Subject: To access iKey 2032 token, to retrieve public/private key from iKey 2032 token using pkcs#11 in sdk1.5, to encrypt/decrypt files.
When I separate the encrypt and decrypt part of java program, encryption program works well, whereas decryption program does not decrypt anything in the decrypt file (But there is no error). I printed out the public and private key in both encrypt and decrypt part of java program, its displayed differently::
Encrypt program:
SunPKCS11-rainbow_token RSA public key, 1024 bits (id 10, session object)
modulus: 114338469922835728259534620463489934081917342509275191892563243582065
74380495029336519036972702864998634664269499641616889325482699399559620370181624
72068116957594402738459932902481604823224406859575930392708524033619120886256353
58738237376491107769961041015109436347533548940674900728805627968145581222172729
public exponent: 65537
SunPKCS11-rainbow_token RSA private key, 1024 bits (id 11, session object, sensi
tive, unextractable)
Decrypt Program::
SunPKCS11-rainbow_token RSA public key, 1024 bits (id 12, session object)
modulus: 138556361758970660122782926386849783732271581948935425587968692317930
09262429353977097956605140384961825974398004270547046620971835394362397699233738
54481804748731546655197744692886754946373745924825650876065903334173666990347814
83727290962956934521650035029131176614982652900659797194703065074407857754883163
public exponent: 65537
SunPKCS11-rainbow_token RSA private key, 1024 bits (id 13, session object, sensi
tive, unextractable)
I suspect that every time program generates different set of key, therefore we need to store the generated key during encryption part (i believe it is to be in the keystore) and to use the same for decryption part. Could you please give me a tips how to do this?
Encrypt Program ::
import java.io.*;
import java.util.*;
import java.lang.*;
import java.sql.*;
import java.text.*;
import java.math.*;
import java.security.*;
import java.security.cert.*;
import java.security.interfaces.*;
import javax.crypto.interfaces.*;
import javax.net.ssl.*;
import javax.crypto.*;
import javax.crypto.spec.DESKeySpec;
import java.security.KeyStore.*;
* A class of Encrypt.
public class Encrypt
public Encrypt(){}
public void loginToken() {
Provider p = new sun.security.pkcs11.SunPKCS11(MQConfig.getvalue("SecurityPropertyPath"));
Security.addProvider(p);
KeyStore ks = null;
try{
String password = General.ReadFiles(MQConfig.getvalue("logFilePath"),"Simple");
password = password.trim();
char pin[] = password.toCharArray();
ks = KeyStore.getInstance("pkcs11");
ks.load(null,pin);
KeyPairGenerator kpg = KeyPairGenerator.getInstance("RSA",p);
KeyPair kp = kpg.genKeyPair();
kpg.initialize(1024, new java.security.SecureRandom());
FileInputStream in = new FileInputStream("C:\\ReportDBBE.properties");
FileOutputStream out = new FileOutputStream("C:\\ReportDBAE.properties");
Cipher cp=Cipher.getInstance("RSA/ECB/PKCS1Padding", p);
cp.init(cp.ENCRYPT_MODE,kp.getPublic());
CipherOutputStream cout=new CipherOutputStream(out,cp);
byte[] input=new byte[8];
int byteread=in.read(input);
while(byteread!=-1){
cout.write(input,0,byteread);
byteread=in.read(input);
cout.flush();
in.close();
cout.close();
catch(NoSuchAlgorithmException nsae)
System.out.println("No Such Algorithm Exception " + nsae.getMessage());
catch(NoSuchPaddingException nspe)
System.out.println("No Such Padding Exception " + nspe.getMessage());
catch(InvalidKeyException ike)
System.out.println("Invalid Key Exception " + ike.getMessage());
catch(IllegalStateException ise)
System.out.println("Illegal State Exception " + ise.getMessage());
catch(KeyStoreException kse)
System.out.println("Key Store Exception " + kse.getMessage());
catch(CertificateException ce)
System.out.println("Certificate Exception " + ce.getMessage());
catch(IOException ioe)
System.out.println("IO Exception " + ioe.getMessage());
public static void main (String args[]) throws Exception {
try{
Encrypt tl = new Encrypt();
tl.loginToken();
}catch(Exception e){
e.printStackTrace();
Decrypt Program ::
import java.io.*;
import java.util.*;
import java.lang.*;
import java.sql.*;
import java.text.*;
import java.math.*;
import java.security.*;
import java.security.cert.*;
import java.security.interfaces.*;
import javax.crypto.interfaces.*;
import javax.net.ssl.*;
import javax.crypto.*;
import javax.crypto.spec.DESKeySpec;
import java.security.KeyStore.*;
* A class of Decrypt.
public class Decrypt
public Decrypt(){}
public void loginToken() {
Provider p = new sun.security.pkcs11.SunPKCS11(MQConfig.getvalue("SecurityPropertyPath"));
Security.addProvider(p);
KeyStore ks = null;
try{
String password = General.ReadFiles(MQConfig.getvalue("logFilePath"),"Simple");
password = password.trim();
char pin[] = password.toCharArray();
ks = KeyStore.getInstance("pkcs11");
ks.load(null,pin);
KeyPairGenerator kpg = KeyPairGenerator.getInstance("RSA",p);
KeyPair kp = kpg.genKeyPair();
kpg.initialize(1024, new java.security.SecureRandom());
FileInputStream in1 = new FileInputStream("C:\\ReportDBAE.properties");
FileOutputStream out1 = new FileOutputStream("C:\\ReportDBAD.properties");
Cipher cipher=Cipher.getInstance("RSA/ECB/PKCS1Padding", p);
AlgorithmParameters algParams = cipher.getParameters();
cipher.init(Cipher.DECRYPT_MODE,kp.getPrivate(),algParams);
CipherInputStream cin1=new CipherInputStream(in1,cipher);
byte[] input1=new byte[8];
int byteread1=cin1.read(input1);
while(byteread1!=-1){
out1.write(input1,0,byteread1);
byteread1=cin1.read(input1);
out1.flush();
in1.close();
out1.close();
cin1.close();
catch(NoSuchAlgorithmException nsae)
System.out.println("No Such Algorithm Exception " + nsae.getMessage());
catch(NoSuchPaddingException nspe)
System.out.println("No Such Padding Exception " + nspe.getMessage());
catch(InvalidKeyException ike)
System.out.println("Invalid Key Exception " + ike.getMessage());
catch(IllegalStateException ise)
System.out.println("Illegal State Exception " + ise.getMessage());
catch(InvalidAlgorithmParameterException iape)
System.out.println("Invalid Algorithm ParameterException " + iape.getMessage());
catch(KeyStoreException kse)
System.out.println("Key Store Exception " + kse.getMessage());
catch(CertificateException ce)
System.out.println("Certificate Exception " + ce.getMessage());
catch(IOException ioe)
System.out.println("IO Exception " + ioe.getMessage());
public static void main (String args[]) throws Exception {
try{
Decrypt tl = new Decrypt();
tl.loginToken();
}catch(Exception e){
e.printStackTrace();
Configuration file::
name = rainbow_token
library = c:\winnt\system32\dkck201.dll
attributes(*,CKO_PRIVATE_KEY,*) = {
CKA_SIGN = true
attributes(*,CKO_PRIVATE_KEY,CKK_DH) = {
CKA_SIGN = null
attributes(*,CKO_PRIVATE_KEY,CKK_RSA) = {
CKA_DECRYPT = true
}Hi all,
Now i manage to use the same keypair for both encrypt/decryprt-SunPKCS#11. Below is my code woks well. In my code i hard coded alias name of certificate, did anyone knows how to read alias name of certificate from iKey token 2032??
import java.io.*;
import java.util.*;
import java.lang.*;
import java.sql.*;
import java.text.*;
import java.math.*;
import java.security.*;
import java.security.cert.*;
import java.security.interfaces.*;
import javax.crypto.interfaces.*;
import javax.net.ssl.*;
import javax.crypto.*;
import javax.crypto.spec.DESKeySpec;
import java.security.KeyStore.*;
* A class of Encrypt.
public class Encrypt
public Encrypt(){}
public void loginToken() {
Provider p = new sun.security.pkcs11.SunPKCS11(MQConfig.getvalue("SecurityPropertyPath"));
String myAlias = "349eefd1-845b-4ba4-9f88-06e9f5cb82f6";
/** to view alias name
keytool -list -v -keystore NONE -storetype PKCS11 -storepass PASSWORD
Security.addProvider(p);
KeyStore ks = null;
PrivateKey privKey = null;
PublicKey pubKey = null;
try{
String password = General.ReadFiles(MQConfig.getvalue("logFilePath"),"Simple");
password = password.trim();
char pin[] = password.toCharArray();
ks = KeyStore.getInstance("pkcs11");
ks.load(null,pin);
java.security.cert.Certificate cert = ks.getCertificate(myAlias);
Key key = ks.getKey(myAlias, pin);
if(key != null) {
System.out.println("key class: " + key.getClass().getName()); // -> sun.security.pkcs11.P11Key$P11PrivateKey
System.out.println("key bytes: " + key.getEncoded()); // -> null!!!!!!!
if(PrivateKey.class.isInstance(key)) {
privKey = (PrivateKey)key;
System.out.println("algo: " + privKey.getAlgorithm()); // -> RSA
//Signature rsasig = Signature.getInstance("SHA1withRSA");
//rsasig.initSign(privKey);
//rsasig.update(data.getBytes());
//byte[] sigBytes = rsasig.sign();
pubKey = cert.getPublicKey();
//System.out.println("signed bytes: " +sigBytes);
//return sigBytes;
//KeyPairGenerator kpg = KeyPairGenerator.getInstance("RSA",p);
//KeyPair kp = kpg.genKeyPair();
//KeyPair kp = kpg.generateKeyPair();
//kpg.initialize(1024, new java.security.SecureRandom());
FileInputStream in = new FileInputStream("C:\\ReportDBBE.properties");
FileOutputStream out = new FileOutputStream("C:\\ReportDBAE.properties");
Cipher cp=Cipher.getInstance("RSA/ECB/PKCS1Padding", p);
//cp.init(cp.ENCRYPT_MODE,kp.getPublic());
cp.init(cp.ENCRYPT_MODE,pubKey);
CipherOutputStream cout=new CipherOutputStream(out,cp);
byte[] input=new byte[8];
int byteread=in.read(input);
while(byteread!=-1){
cout.write(input,0,byteread);
byteread=in.read(input);
cout.flush();
in.close();
cout.close();
catch(NoSuchAlgorithmException nsae)
System.out.println("No Such Algorithm Exception " + nsae.getMessage());
catch(NoSuchPaddingException nspe)
System.out.println("No Such Padding Exception " + nspe.getMessage());
catch(InvalidKeyException ike)
System.out.println("Invalid Key Exception " + ike.getMessage());
ike.printStackTrace();
catch(IllegalStateException ise)
System.out.println("Illegal State Exception " + ise.getMessage());
catch(KeyStoreException kse)
System.out.println("Key Store Exception " + kse.getMessage());
catch(CertificateException ce)
System.out.println("Certificate Exception " + ce.getMessage());
catch(IOException ioe)
System.out.println("IO Exception " + ioe.getMessage());
catch(UnrecoverableKeyException unrke)
System.out.println("Unrecoverable Key Exception " + unrke.getMessage());
public static void main (String args[]) throws Exception {
try{
Encrypt tl = new Encrypt();
tl.loginToken();
}catch(Exception e){
e.printStackTrace();
Your help is very much appreciated!!!! -
Why is my user id/pw not accepted by ICloud on my iPad but it is accepted by iCloud on my computer? I am using the same password for both.
Rebooting your iDevice
Hold down the Sleep (On-Off) and Home buttons together for about 10-15 seconds or until the Apple Logo appears - ignore the red slider if it appears - then let go of the buttons. The device should begin to start up.
Now try entering the information again. See if it works now. -
I want to use an external microphone for both my iPhone 5S and my MacBook Pro. This is for music and for making recordings outside such as birds. Any suggestions?
use a splitter something like this
http://www.amazon.co.uk/3-5mm-Headphone-Splitter-Cable-iPhone-White/dp/B003W37DS E/ref=pd_sxp_grid_pt_2_1 -
My iPod will no longer charge with a wall charger, only the computer. I know it's not becuase of the wall piece or my cord, since I also use the same cord for computer charging, and the wall piece seems to work with others devices. It worked a couple of weeks ago, then suddenly quit. I think it may be something to do with the inside of my iPod where the charger goes. I find it really inconvient to always have to use the computer to charge my iPod. I believe I have a three year warrenty on my iPod, but I wouldn't think it would cover this problem. Is there anything I can do to fix it?
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store. Bring the wall charger
Apple Retail Store - Genius Bar
If you have a three-year warrany it is not from Apple. The standare Apple warrantyis 1 year and y can purchas an extended warranty that give y a total of two years. You can check your Apple warranty coverage hee:
Check Your Service and Support Coverage -
Why can't I use the same email for messages on the IPad as the iPhone?
I've just upgraded my iPad 2 with iOS 5, I'm trying to set up the messages app to send text messages. It's telling me that the email address that Im entering can't be verified because it's already in use. Well, it's the only one I have, am I able to use the same one that I've been using all along?
It is up to the app developer to decide if the app should work in landscape mode or not. This is also true on Android phones, by the way.
-
How do I use the same Itunes for both my IPOD and IPAD?
How do i use itunes for both my ipod and ipad? and have everything on both of them.
You can connect one of them to your computer's iTunes, select it on the left-hand side of iTunes, and then on the right-hand side select the Music tab and choose what to sync to that device - you can then connect, select and sync the same content to your other device.
-
Using the same client for both regfree and out-of-proc COM
Hi,
Here is the context:
1. We have the same set of COM objects that can be deployed as in-proc COM servers (dlls) or out-of-proc COM servers (exe). In-proc servers are called through regfree COM.
2. We have test projects that use the in-proc COM servers through regfree COM.
I would like to use the same test client projects for both regfree and out-of-proc COM servers (but not at the same time). For example, I would like to first run the client using regfree COM, then delete the in-proc dll and register the out-of-proc com server,
and then run the client again without having to recompile. But I have not found a way to do this.
Instead, what I have to do is modify the project settings of the test client project, removing the regfree stuff (the manifest dependencies) before I can use the test client project with the out-of-proc server.
Is there a way to do this without recompiling?
FYI, I have tried regfree COM by changing the client project's Project->Properties->Linker->Manifest file->Additional Manifest Dependencies, or by changing the client project's Project->Properties->Manifest Tool->Input and Output->Additional
Manifest Files. Either way works with regfree COM. And either way I have to remove those settings before making it work with out-of-proc COM (and hence recompiling, which is what I am trying to avoid).
Thanks,
NickTry Manifest Tool > Input and Output > Embed Manifest = No, and change Linker > Manifest File > Manifest File to drop ".intermediate" in the middle (or just rename the file after the build).
A manifest doesn't have to be embedded into the executable, it could be a standalone file named like ApplicationName.exe.manifest and sitting in the same directory next to the .EXE. Then you can simply delete or rename it back and forth to switch between
registered and reg-free COM.
Igor Tandetnik
Maybe you are looking for
-
how to reboot an ipad mini?
-
Ozzie, you mentioned you fixed this...
Re: Podcasts appear under Music not Podcasts Posted: Jan 5, 2007 12:56 PM in response to: camoracer Click to reply to this topic Reply email Email This was very helpful!! I downloaded a podcast in iTunes AND directly from the source and looked at the
-
Materialized view logs pretty huge!
Hi, I have a table MLOG$_XXXXX, which i guess is a materialized view log table. It is huge in size (80GB) and is growing at a very alarming rate. Could someone please help me to reduce the size of this table? How do I find out which materialized view
-
Procedures of semi-automatic vendor evaluation
Dear Experts , Kindly help on the exact procedures of semi-automatic vendor evaluation which includes configuration steps and other steps . Best Regards
-
Why does browser download a file rather than displaying it?
I am using a Nexus 7 device. I have a website locally on the device together with all of the data files. When I use the browser to select a file it does not need to download it. I want it to call up a list of the programs that can display the file so