Oracle Wire Protocol Driver for ASA
Hi all,
where can I get the Oracle wire driver for sql Anywhere 10, 12 or 16?
Please send me the URL and info. Thanks.
André Rust
AFAIK SQL Anywhere (at least Standard Edition) doesn't contain any Oracle ODBC driver.
The page Recommended ODBC Drivers for 16.0 MobiLink tells to install an Oracle Client to use it's ODBC driver, but doesn't mention "Wire", whereas for Mobilink 10.0 Recommended ODBC Drivers for 10.0.1 MobiLink Technote: Mobile Enterprise, Database Management iAnywhere - Sybase Inc it's recommended to purchase "DataDirect Oracle Wire Protocol ODBC Driver".
Similar Messages
-
[Oracle][ODBC SQL Server Wire Protocol driver][SQL Server]Login failed for user 'RECOVER'
Hi,
We have exadata x3-2. I am seeing this error in alert log file frequently.
The db version: 11.2.0.3 On RAC on Linux 5.8 x86-64Bit
Errors in file /d01/oracle/TEST/11.2.0/admin/TEST1_dbtest/diag/rdbms/prod/TEST1/trace/TEST1_reco_11909.trc:
ORA-01017: invalid username/password; logon denied
[Oracle][ODBC SQL Server Wire Protocol driver][SQL Server]Login failed for user 'RECOVER'. {28000,NativeErr = 18456}
ORA-02063: preceding 2 lines from HIS_CUST
The file /d01/oracle/TEST/11.2.0/admin/TEST1_dbtest/diag/rdbms/prod/TEST1/trace/TEST1_reco_11909.trc
Contains many repeated lines like below
*** 2015-01-21 06:34:40.209
ERROR, tran=21.24.51311, session#=1, ose=0:
ORA-01017: invalid username/password; logon denied
[Oracle][ODBC SQL Server Wire Protocol driver][SQL Server]Login failed for user 'RECOVER'. {28000,NativeErr = 18456}
ORA-02063: preceding 2 lines from HIS_CUST
Could any please help why is this happening.
ThanksHi,
You have customers who are running distributed transactions using a gateway which need to be rolled back. However, the gateway has not been correctly configured for distributed transactions. To roll back a transaction on the SQL*Server database a connection is made as the user defined in the parameter HS_FDS_RECOVERY_ACCOUNT in the gateway init<sid>.ora file but this user has not been created in the SQL*Server database with the password defined in HS_FDS_RECOVERY_PWD. This user also needs to own the transaction log table.
I assume you are using the Database Gateway for SQL*Server (DG4MSQL) as the Database Gateway for ODBC (DG4ODBC) doesn't support distributed transaction.
If you have access to My Oracle Support have a look at this note -
How to Setup DG4MSQL to Use Distributed Transactions (Doc ID 227011.1)
Otherwise, check the Gateway documentation.
Regards,
Mike -
When I migrate CLOB datas from Oracle 10g to PostgreSQL 9.0,and the target data type is text,the replicat process abend,and it reports as following:
WARNING OGG-03056 Oracle GoldenGate Delivery, repdb2.prm: Source table SDCMNET.T_INFO_SUPERIOR_PROGRAM column PRO_CONTENT_CLOB data size exceeds the maximum target table sdcmnet.t_info_superior_program column pro_content_clob size. Automatic truncation is enabled for all tables/columns without further warnings.
WARNING OGG-00869 Oracle GoldenGate Delivery, repdb2.prm: [SQL error 0 (0x0)][Oracle][ODBC PostgreSQL Wire Protocol driver]String data, right truncated.
WARNING OGG-01004 Oracle GoldenGate Delivery, repdb2.prm: Aborted grouped transaction on 'sdcmnet.t_info_superior_program', Database error 0 ([SQL error 0 (0x0)][Oracle][ODBC PostgreSQL Wire Protocol driver]String data, right truncated.
But,according to the SEQNO and RBA,I find the records have been migrated,and the length of records is equal to what is in oracle.Then I try to use the odbc driver of postgresql 9.3 to replace,although I can login the database ,but it warns again.
Can anyone help me?This forum is for Oracle Maven Repository. You might have more luck posting your question in an forum for GoldenGate - you are more likely to find someone who knows about that product in its own forums.
-
Hi guru's am new to hyperion looking for some help on hyperon,what do u mean by Wire protocol driver pls tell me in brief
I used the wired protocol driver to connect to an Oracle table with DATAEXPORT in lieu of a tradtional DSN.
I don't pretend to know much about Oracle, but it seems to be the way you define the DSN.
Here's the first hit I got when I googled "wired protocol driver" -- it seems to match up with what I wrote
Regards,
Cameron Lackpour -
Hi,
Does anybody know of a free wire protocol driver available on the internet??? (Accessing Oracle server without installing the client software...)
Thanks for any info.
JCI do not believe such an animal exists. Since Oracle's wire protocol is proprietary, reverse engineering it is a very significant investment.
If you need to access the Oracle server without installing the Oracle client, can you use the thin JDBC driver?
Justin -
Hii ..
need help on this ..
This what I am doing ..
I am using a DATAEXPORT function to export level0 data from my essbase 11.1.2.2 to Microsoft SQL 2008 tables.
So what I did first I exported the level0 data to a flat file using DATAEXPORT and the created the SQL columns by the same in that order only in my SQL table.
When I run it fails with this error:
ODBC Layer Error: [21S01] ==> [[DataDirect][ODBC SQL Server Wire Protocol driver][Microsoft SQL Server]Column name or number of supplied values does not match table definition.]
[Tue Jul 23 18:26:07 2013]Local/dataexp/dataexp/admin@Native Directory/1209813312/Info(1021014)
ODBC Layer Error: Native Error code [213]
[Tue Jul 23 18:26:07 2013]Local/dataexp/dataexp/admin@Native Directory/1209813312/Error(1012085)
Unable to export data to SQL table [dataexp]. Check the Essbase server log and the system console to determine the cause of the problem.
[Tue Jul 23 18:26:07 2013]Local/dataexp/dataexp/admin@Native Directory/1209813312/Info(1021002)
SQL Connection is Freed
[Tue Jul 23 18:26:07 2013]Local/dataexp/dataexp/admin@Native Directory/1209813312/Warning(1080014)
Transaction [ 0x1c50001( 0x51ee7d66.0x80342 ) ] aborted due to status [1012085].
[Tue Jul 23 18:26:07 2013]Local/dataexp/dataexp/admin@Native Directory/1209813312/Info(1012579)
Total Calc Elapsed Time for [test.csc] : [1.44] seconds
=============================================================
I did a simple test on my Sample.basic application then ..
loaded the calc data to it and then used the below script to export to a flat file
//ESS_LOCALE English_UnitedStates.Latin1@Binary
SET DATAEXPORTOPTIONS
DataExportLevel "Level0";
DataExportOverwriteFile ON;
DataExportColFormat OFF;
DataExportDimHeader OFF;
FIX(
"Jan",
"Sales",
"Actual"
/*DATAEXPORT "File" "," "/home/hypadmin/samtest.txt";*/
DATAEXPORT "DSN" "Abhitest" "sample" "sa" "welcome1";
ENDFIX
out put as below:
"Sales"
"100-30","California"
"Jan","Actual",145
Now In sql I created only 3 columns with name Jan/Sales/Actual and when I run this script again with comments removed .. I get the same error as what I have got in my first test case with other application ..
but when I create the columns with same name as what its in export
Sales/100-30/Califirnia/Jan/Actual
It created the new rows successfully ..
So with this I think the error which I am getting with my other application might be because of the same column issue .. but then I have created all the columns by looking at the export file only as I did in sample ..
Any idea would be helpful ..
Thanks
Abhishek
IFirst make sure you add
DataExportRelationalFile ON;
to your set commands it is missing
I alwats like to also add
DataExportColHeader dimensionName;
so I am sure what dimension is getting put into the columns.
Then count the number of dimensions in your outline (exclude attribute dimensions). You need at least that many columns in your table -1 + the number of members you will be returning as columns in the export
Taking your example Sample basic has 5 dimensions
Measures
Years
Scenario
Product
Market
Since you did not specify a dataexportcolheader it took the dense dimension Scenario as the columns. Your fix statement is limiting that to one member. Doing the math
5 -1 + 1 = 5 columns in your table which is what you found works. Suppose you fixed on bothe Actual and budget in scenario then you would need 6 columns 5 -1 +2 -
How to install Oracle 10g ODBC driver for win 64 bit?
I need to install Oracle 10g ODBC driver for win 64 bit, I donot know how to do that,
where to find the driver....
The driver 10.1.0.5.0 25-Apr-2006 2.1 MB isnot for 64 bits Win server 2003.Dear Sir,
Yes, you can find the Driver here
http://www.oracle.com/technology/software/tech/windows/odbc/index.html -
Oracle JDBC Thin Driver for oracle 9.2.0.4
Hi,
It would be nice if someone please guide me to the download of Oracle JDBC Thin Driver for oracle 9.2.0.4.
Thanks in anticipationuser566773,
As far as I know, all Oracle JDBC drivers are meant to be backward compatible.
According to the table on the following Web page, the latest Oracle JDBC driver can be used with Oracle 9.2.0.x DBMS.
http://www.oracle.com/technology/tech/java/sqlj_jdbc/index.html
Good Luck,
Avi. -
Missing Packets - Protocol Driver for Sol7.x+
hi
I have written a network protocol driver that is both a STREAMS driver and a STREAMS module.I want to essentially monitor all the TCP packets flowing in the network.It works fine,but the problem is that over 24 hrs,I see that the driver keeps missing packets.Does anyonw have any inputs?
Thanxfound solution here https://discussions.apple.com/message/23473223#23473223
it helps -
Server Installation Oracle Wire Protocol Missing
Hello Gurus,
I have installed SAP Predictive Analytics 2.0 on Windows Server 2008 64-bit. I couldn't find the standard odbc connection for Oracle like below after installation.I really appreciate any comments.Hi,
As per the PAM (https://websmp109.sap-ag.de/~sapidb/012002523100002487022015E) this should be supported. We have a PA 2.1 release freshly out, can I suggest you try installing and see if the problem remains the same?
Best regards
Antoine -
I am selecting data from a Progress database using the Data Direct Open Edge 10.1.B driver. The target table stores the date values as varchar in this format "22-OCT-14" In the select statement I can use Progress statements or T-SQL to transform
the varchar to a date - but cannot do the same in the WHERE clause
Select po_number, cast(po_date as date) as [po_date] from [po_table]
(no problem - the [po_date] field stored as "22-OCT-14" is returned as "2014-10-22 00:00:00"
but when I include the cast in the where clause I get the error described in the title
Select [po_number], [po_date] from [po_table WHERE cast([po_date] as date)<= '10/22/2014' - NO GOOD
I have tried very many combinations of the date string format , different functions and sub-queries but cannot find an answerThe sql strings I posted are working examples - I've tried the ISO format you included - any number of date formats will work when the target field is a "Date" field - but trying any kind of transform statment to processa date stored
as a varchar in the WHERE CLAUSE throws the erro
Storing dates in a varchar column is a bad idea on any platform. Apparently there are strings in that column which cannot be converted to dates.
On SQL Server you could have found this with
SELECT po_date FROM po_table WHERE isdate(po_date) = 1
What you should use on Progress, I have no idea.
Erland Sommarskog, SQL Server MVP, [email protected] -
SQL load with Oracle Wire Protocol
Has anyone used this method? I'm not quite sure how to connect with it. The documentation seems to be a little lacking. Any advice would be greatly appreciated. I'd love not to load the Oracle client on all of our servers from now on.Thanks!
Are you trying to use SQL Interface to load data?
-
Oracle JDBC Thin Driver and Firewall Problem
Hi!
We have Oracle 8.1.5 and Websphere App Server. There is a
firewall between the two. A servlet creates a connection pool
(not that of Wesphere's). The frontend is JSP/HTML (no applets).
The servlet uses the Oracle JDBC Thin Driver for DB Connections.
The problem is - Once the connection is freed, the connection
pool is not being able to retrieve it and hence it created
another one, thus reaching the max. # of connections and the
system hangs. Restarting the DB service flushes the connection
and the application starts running again...
There was a similar problem discussed in this forums long ago. I
have not yet tried mentioning the firwall port and IP in the
connection string. But apart from that, is there any other
setting I need to do (on firewall or for the connectionstring)
to deal with this problem?
Someone had suggested to punch a hole in the firewall for the DB
port - but we can not really do that in the current scenario...
I would appreciate if anyone could share their experience
regarding how they resolved this issue.
Thanks in advance,
Vijaya.One more question -
Can we use Oracle JDBC OCI driver? We do not have any appletes...
Does it have firewall issues too? Is there any other driver that
we can use?
Thanks,
Vijaya. -
I am wondering how long until the beta JDBC Drivers for RDB go public. I was told in December that the drivers would be out before the new year, and now I am wondering if maybe I am looking in the wrong place. At the OTN site for RDB the link for the JDBC drivers takes me to the beta page. Are they still in beta or have they been released?
I'm reasonably confident that there's no JDBC driver for RDB. I
would think that your only option would be to use a JDBC-ODBC
bridge along with Oracle's ODBC driver for RDB.
Justin -
Is there free jdbc type4 driver for oracle?
i neen to connect to oracle to develop my application, but there's a problem when tryin' to resolve peoblem of character set. in oracle, as i know, it uses unicode that resulting in the font code, which is not falling into the character set of unicode, whould cause failure in translating user defined font code. beside, for i do not know what kind of license that oracle jdbc type4 driver publishes, hope someone are able to tell me wheather there's any software like freetds in sql2000, because, if necessary, i may need to redistrubite the jdbc driver for my own use!
thanks in advice,Oracle has drivers available from their site (free ones) for java and the specific version of Oracle you are running.
Maybe you are looking for
-
How do I copy the entire contents of my laptops failing hard drive to copy back onto a new computer.
How do I copy the entire contents of my laptops failing hard drive to copy back onto a new computer.
-
Including a resource file in java
hello all, I am new to java and the question I m asking may be quite basic. I have developed an application which is using a .jpg image file. In the code I m accessing the image by only specifying the name of the file (LoadFile("image.jpg")); instead
-
In the summary section in iTunes, what is "other" on my iPhone 5 ?
Using iTunes, In the summary section as I review the contents of my iPhone, there is an "other" category and it is taking up over 11GB of memory in my iPhone. What is in this category? Do I need it? If not, how do I reduce or remove it?
-
Displaying UMLAUT characters in WEBI report - Need Confirmation in Settings
Hi, I am using BOXI-R2 in Windows machine. I have done the below settings in BO configuration files. My WEBI report shows no data to display when there are UMLAUT German characters (for example) in the data. Japanese and English characters are displa
-
Counting types of characters using REGEXP
Hi, Is there a simle way to count the types of characters per words in a sentence using regexp? I'm trying to get the number of upper and lowercase chars for every [:lower:] and[:upper:] patterns: For example 'John Bell' -> 'A(1)a(3) A(1)a(3)' 'Frede