OracleException ORA-1017: invalid username/password; logon denied at Oracle

Hi,
SYS@EHS06T>select from v$version;*
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
PL/SQL Release 10.2.0.5.0 - Production
CORE 10.2.0.5.0 Production
TNS for 64-bit Windows: Version 10.2.0.5.0 - Production
NLSRTL Version 10.2.0.5.0 - Production
I have checked the PWADM and PWSYS account and tried to connect to the DB using sqlplus both. I didn’t got any error while connecting.
Also checked the Event viewer logs and found nothing.
But end user getting below error from application :
Message: Error saving emissions
Oracle.DataAccess.Client.OracleException ORA-1017: invalid username/password; logon denied at Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, String procedure, Boolean bCheck) at Oracle.DataAccess.Client.OracleException.HandleError(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, Object src) at Oracle.DataAccess.Client.OracleConnection.Open() at Ess.Framework.DA.BulkOperations.InsertDataOracle(String tableName, DataTable table, Int32 timeout) at Ess.Framework.DA.BulkOperations.InsertData(String tableName, DataTable table) at Ess.ESuite.Air.BO.Calculator.Controller.SaveEmissions(List`1 list) at Ess.ESuite.Air.BO.Calculator.Controller.SaveCachedEmissions()
Request your assistance in solving this issue. Thanks!

hi,
Try a SQL*Net trace on the client (your PC) for the connection that works and the one that does not. Compare to see what is different.
Client Side Tracing:
Your SQLNET.ORA file should contain the following lines to produce a client side trace file:
trace_level_client = 10
trace_unique_client = on
trace_file_client = sqlnet.trc
trace_directory_client =
regards,

Similar Messages

"ORA-1017: invalid username/password; logon denied"

I am running Oracle Database 11g R1.
Oracle.DataAcess.dll 10.2
My code as below:
string oradb = "Data Source=orcldemo;User ID=HR;Password=hr;";
OracleConnection conn = new OracleConnection(oradb);
conn.Open();
I keep on getting error:
"ORA-1017: invalid username/password; logon denied"
But if I tried to access from the same host using Oracle SQL Developer ver 1.2 and using the same username and password then I have no problem at all.
Any help? Thanks
Ming Man

This is what I found on Metalink
Applies to:
Oracle Data Provider for .NET - Version: 9.2.0.8.0 to 10.2.0.3.0
Microsoft Windows (32-bit)
Symptoms
You are trying to connect to 11g database using 10g ODP.NET (or lower version) and you receive
ORA-1017 - invalid username /password
While using 11g ODP.NET or 10g sqlplus ,this problem does not occur.
Cause
Whenever we send the passwords using 10g ODP.NET ,it converts them into all upper cases.
Prior to 11g database , the passwords were case-insensitive.
So sending all-capital password would not cause problem there.
However, from 11g onwards , passwords are case sensitive.
Hence when ODP.NET sends all-capital password to a 11g database , password validation fails and results in the ORA-1017 error.
This issue is reported in an internal bug .The bug number is not revealed for confidentiality policy reasons. The backport request has been created for 10.2 and 10.1 but the patch was not available at the time of writing this note.
Solution
There are several solutions for this issue:
Configure the database to not support case-sensitivity in passwords.
Create all-capital passwords
Pass a lowercase password by wrapping the password field in quotes.
e.g.
("Data Source=ORCL;User ID=scott;Password = \"tiger\"");
The bug is also fixed in the 10.2.0.4.0 Oracle Database Patch 6810189.

ERROR: ORA-01017: invalid username/password; logon denied

Hi all
I need your kind help.
I have installed Oracle Audit Vault Server Release 10.2.3.2 in Linux system and collection agent in Windows system. Adding and starting DBAUD collector went fine however adding REDO collector return back errors when executing avorcldb add_collector command as follow
[oracle@avsrv ~]$
[oracle@avsrv ~]$ avorcldb add_collector -srcname orcl -agentname avagent01 -colltype REDO -av Lugaopc:1521:orcl
collector REDO_Collector for source orcl already exists
initializing REDO Collector
ERROR: could not get AV source user connection using jdbc:oracle:oci:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=Lugaopc)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=orcl)))
ERROR: ORA-01017: invalid username/password; logon denied
[oracle@avsrv ~]$
Here is the contents of avorcldb.log file
09-09-13 16:58:44 [INFO ] Processing command add_collector
09-09-13 16:58:44 [INFO ] Processing arg -srcname = orcl
09-09-13 16:58:44 [INFO ] Processing arg -agentname = avagent01
09-09-13 16:58:44 [INFO ] Processing arg -colltype = REDO
09-09-13 16:58:44 [INFO ] Processing arg -av = Lugaopc:1521:orcl
09-09-13 16:58:44 [INFO ] Connect info : Lugaopc:1521:orcl
09-09-13 16:58:45 [INFO ] Got AV admin connection using jdbc:oracle:oci:@AVDB
09-09-13 16:58:45 [INFO ] Executing SQL as [ADM@AV] select s.host||':'||a1.num_value||':'||a2.char_value from avsys.av$attrvalue a1, avsys.av$attrvalue a2, avsys.av$source s, avsys.av$attrdef ad1, avsys.av$attrdef ad2 where source_name = :1 and a1.inst_id = s.source_id and a2.inst_id = s.source_id and a1.attr_id = ad1.attr_id and ad1.attr_name = 'PORT' and a2.attr_id = ad2.attr_id and ad2.attr_name = 'DB_SERVICE'
09-09-13 16:58:45 [INFO ] Using bind value orcl
09-09-13 16:58:45 [INFO ] Return value = Lugaopc:1521:orcl
09-09-13 16:58:45 [INFO ] Connect info : Lugaopc:1521:orcl
09-09-13 16:58:45 [INFO ] Executing SQL as [ADM@AV] select to_char(source_id) from avsys.av$source where source_name = :1
09-09-13 16:58:45 [INFO ] Using bind value orcl
09-09-13 16:58:45 [INFO ] Return value = 1
09-09-13 16:58:46 [INFO ] Got source user connection using jdbc:oracle:oci:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=Lugaopc)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=orcl)))
09-09-13 16:58:46 [INFO ] Executing SQL as [ADM@AV] select decode(c.status, 1, 'active', 0, 'dropped', null) from avsys.av$collector c, avsys.av$source s where source_name = :1 and collector_name = :2 and c.source_id = s.source_id
09-09-13 16:58:46 [INFO ] Using bind value orcl
09-09-13 16:58:46 [INFO ] Using bind value REDO_Collector
09-09-13 16:58:46 [INFO ] Return value = active
09-09-13 16:58:46 [MESG ] collector REDO_Collector for source orcl already exists
09-09-13 16:58:46 [INFO ] Executing SQL as [ADM@AV] select decode(c.status, 1, 'active', 0, 'dropped', null) from avsys.av$collector c, avsys.av$source s where source_name = :1 and collector_name = :2 and c.source_id = s.source_id
09-09-13 16:58:46 [INFO ] Using bind value orcl
09-09-13 16:58:46 [INFO ] Using bind value REDO_Collector
09-09-13 16:58:46 [INFO ] Return value = active
09-09-13 16:58:46 [MESG ] initializing REDO Collector
09-09-13 16:58:46 [INFO ] Executing SQL as [ADM@AV] select username from avsys.av$source where source_name = :1
09-09-13 16:58:46 [INFO ] Using bind value orcl
09-09-13 16:58:46 [INFO ] Return value = AVSRCUSR1
09-09-13 16:58:46 [INFO ] Executing SQL as [ADM@AV] {? = call avsys.dbms_audit_vault.reset_source_user(?)}
09-09-13 16:58:46 [INFO ] Adding mask for user password
09-09-13 16:58:46 [INFO ] Executing SQL as [USR@SRC] select table_name from user_tables where upper(table_name) = upper(:1)
09-09-13 16:58:46 [INFO ] Using bind value STREAMS_HEARTBEAT
09-09-13 16:58:46 [INFO ] Return value = STREAMS_HEARTBEAT
09-09-13 16:58:46 [INFO ] Executing SQL as [USR@SRC] drop table streams_heartbeat
09-09-13 16:58:46 [INFO ] Executing SQL as [USR@SRC] create table streams_heartbeat( src_dbname varchar2(4000), job_number number, heartbeat_time timestamp)
09-09-13 16:58:46 [INFO ] Executing SQL as [USR@SRC] declare dbs_name varchar2(4000); begin select global_name into dbs_name from global_name; insert into streams_heartbeat values (dbs_name, 0, SYSTIMESTAMP); end;
09-09-13 16:58:46 [INFO ] Executing SQL as [USR@SRC] create or replace procedure update_heartbeat IS begin update streams_heartbeat set heartbeat_time=(select systimestamp from dual); commit; end;
09-09-13 16:58:46 [INFO ] Executing SQL as [USR@SRC] select table_name from user_tables where upper(table_name) = upper(:1)
09-09-13 16:58:46 [INFO ] Using bind value CAPTURE_RULES
09-09-13 16:58:46 [INFO ] Return value = CAPTURE_RULES
09-09-13 16:58:46 [INFO ] Executing SQL as [USR@SRC] drop table capture_rules
09-09-13 16:58:46 [INFO ] Executing SQL as [USR@SRC] create table capture_rules( rule_name varchar2(50), rule_scope varchar2(6), rule_type varchar2(3), obj_name   varchar2(100))
09-09-13 16:58:46 [INFO ] Executing SQL as [ADM@AV] select global_name from global_name
09-09-13 16:58:46 [INFO ] Return value = AVDB.AVSRV
09-09-13 16:58:46 [INFO ] Executing SQL as [USR@SRC] select db_link from user_db_links where db_link = :1
09-09-13 16:58:46 [INFO ] Using bind value AVDB.AVSRV
09-09-13 16:58:46 [INFO ] Return value = AVDB.AVSRV
09-09-13 16:58:46 [INFO ] Executing SQL as [USR@SRC] drop database link "AVDB.AVSRV"
09-09-13 16:58:46 [INFO ] Executing SQL as [USR@SRC] select version from v$instance
09-09-13 16:58:46 [INFO ] Return value = 11.2.0.1.0
09-09-13 16:58:46 [INFO ] Creating DB link using AVDB.AVSRV,AVSRCUSR1,{avsrcusr_pwd},Lugaopc,1521,orcl
09-09-13 16:58:46 [INFO ] Connecting as srcuser_ora01 to @(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=Lugaopc)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=orcl)))
09-09-13 16:58:46 [INFO ] Output from SQLPlus
09-09-13 16:58:46 [INFO ]
09-09-13 16:58:46 [INFO ] Package created.
09-09-13 16:58:46 [INFO ]
09-09-13 16:58:46 [INFO ] No errors.
09-09-13 16:58:47 [INFO ]
09-09-13 16:58:47 [INFO ] Package body created.
09-09-13 16:58:47 [INFO ]
09-09-13 16:58:47 [INFO ] No errors.
09-09-13 16:58:47 [INFO ]
09-09-13 16:58:47 [INFO ] Package created.
09-09-13 16:58:47 [INFO ]
09-09-13 16:58:47 [INFO ] No errors.
09-09-13 16:58:47 [INFO ]
09-09-13 16:58:47 [INFO ] Package body created.
09-09-13 16:58:47 [INFO ]
09-09-13 16:58:47 [INFO ] No errors.
09-09-13 16:58:47 [INFO ] Executing SQL as [USR@SRC] select distinct name from user_errors where name = :1
09-09-13 16:58:47 [INFO ] Using bind value DBMS_SRC_STREAMS_COLLECTOR
09-09-13 16:58:47 [INFO ] Return value = null
09-09-13 16:58:47 [ERROR] could not get AV source user connection using jdbc:oracle:oci:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=Lugaopc)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=orcl)))
09-09-13 16:58:47 [ERROR] ORA-01017: invalid username/password; logon denied
java.sql.SQLException: ORA-01017: invalid username/password; logon denied
    at oracle.jdbc.driver.T2CConnection.checkError(T2CConnection.java:765)
    at oracle.jdbc.driver.T2CConnection.logon(T2CConnection.java:414)
    at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:546)
    at oracle.jdbc.driver.T2CConnection.<init>(T2CConnection.java:162)
    at oracle.jdbc.driver.T2CDriverExtension.getConnection(T2CDriverExtension.java:53)
    at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:521)
    at java.sql.DriverManager.getConnection(DriverManager.java:525)
    at java.sql.DriverManager.getConnection(DriverManager.java:140)
    at oracle.av.avca.jdbc.JdbcConnection.<init>(JdbcConnection.java:87)
    at oracle.av.orcldb.DAO.initConnection(DAO.java:79)
    at oracle.av.orcldb.DAO.<init>(DAO.java:64)
    at oracle.av.orcldb.commands.AddCollector.setupCollector(AddCollector.java:746)
    at oracle.av.orcldb.commands.AddCollector.execute(AddCollector.java:230)
    at oracle.av.orcldb.Command.process(Command.java:89)
    at oracle.av.orcldb.Main.process(Main.java:118)
    at oracle.av.orcldb.Main.main(Main.java:132)
I have searched the forum to my level best without clear solution
Regards
Sadock

Hi gurus
I don't believe if this is missing solution from oracle community. I have decided to installed the collction agent and source database in linux system, so now both auditt vault server and collction agent are running in Linux system (but separately)
I am wondering, avorcldb add_collector -srcname ORCL -agentname avagent01 -colltype DBAUD and avorcldb add_collector -srcname ORCL -agentname avagent01 -colltype OSAUD -orclhome /u01/app/oracle/product/11.2.0/dbhome_1 are working fine and I am able to start these collectors
The avorcldb verify -src Lugaosrv:1521:ORCL.LUGAOSRV -colltype ALL command also return good results
[oracle@avsrv ~]$ avorcldb verify -src Lugaosrv:1521:ORCL.LUGAOSRV -colltype ALL
Enter Source user name: srcuser_ora01
Enter Source password:
source ORCL.LUGAOSRV verified for OS File Audit Collector collector
source ORCL.LUGAOSRV verified for Aud$/FGA_LOG$ Audit Collector collector
source ORCL.LUGAOSRV verified for REDO Log Audit Collector collector
[oracle@avsrv ~]$
The problem still I am facing is when attempting to add REDO collector. In fact the collector is added successful and i can see it even on EM console.
[oracle@avsrv ~]$ avorcldb add_collector -srcname ORCL -agentname avagent01 -colltype REDO -av Lugaosrv:1521:ORCL.LUGAOSRV
source ORCL verified for REDO Log Audit Collector collector
Adding collector...
Collector added successfully.
remember the following information for use in avctl
Collector name (collname): REDO_Collector
initializing REDO Collector
ERROR: could not get AV source user connection using jdbc:oracle:oci:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=Lugaosrv)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ORCL.LUGAOSRV)))
ERROR: ORA-01017: invalid username/password; logon denied
[oracle@avsrv ~]$
Any help will be appreciated
Sadock

ORA-01017: invalid username/password; logon denied on Weblogic 9.0 cluster

I am experiencing the following exception in Weblogic 9.0 server cluster environment. The same code works fine in non-cluster environment. The problem happens every now and then and would go away temporarily after recycling the domains. The Oracle database that the backend system connects to is 9.0.2.6. I am using the ocjdbc14.jar jdbc driver that comes with the Weblogic 9.0 on the client side to connect. I really appreciate any help or clue.
Ashkan
Error on dequeuing requests
org.springframework.jdbc.CannotGetJdbcConnectionException: Could not get JDBC Connection; nested exception is java.sql.SQLException: ORA-01017: invalid username/password; logon denied
java.sql.SQLException: ORA-01017: invalid username/password; logon denied
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
     at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:289)
     at oracle.jdbc.ttc7.O3log.receive2nd(O3log.java:496)
     at oracle.jdbc.ttc7.TTC7Protocol.logon(TTC7Protocol.java:278)
     at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:346)
     at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:468)
     at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:314)
     at java.sql.DriverManager.getConnection(Ljava.lang.String;Ljava.util.Properties;Ljava.lang.ClassLoader;)Ljava.sql.Connection;(Unknown Source)
     at java.sql.DriverManager.getConnection(Ljava.lang.String;Ljava.util.Properties;)Ljava.sql.Connection;(Unknown Source)
     at org.springframework.jdbc.datasource.DriverManagerDataSource.getConnectionFromDriverManager(DriverManagerDataSource.java:291)
     at org.springframework.jdbc.datasource.DriverManagerDataSource.getConnectionFromDriverManager(DriverManagerDataSource.java:277)
     at org.springframework.jdbc.datasource.DriverManagerDataSource.getConnectionFromDriverManager(DriverManagerDataSource.java:259)
     at org.springframework.jdbc.datasource.DriverManagerDataSource.getConnection(DriverManagerDataSource.java:241)
     at org.springframework.jdbc.datasource.DataSourceUtils.doGetConnection(DataSourceUtils.java:111)
     at org.springframework.jdbc.datasource.DataSourceUtils.getConnection(DataSourceUtils.java:77)
     at org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java:810)
     at org.springframework.jdbc.core.JdbcTemplate.call(JdbcTemplate.java:857)
     at org.springframework.jdbc.object.StoredProcedure.execute(StoredProcedure.java:102)
     at com.rwi.wam.dao.serviceprovider.ServiceProviderDequeue.dequeue(ServiceProviderDequeue.java:32)
     at com.rwi.wam.dao.serviceprovider.ServiceProviderDAO.dequeueRequest(ServiceProviderDAO.java:48)
     at com.rwi.wam.ejb.WAMRequestMessageBean.onMessage(WAMRequestMessageBean.java:168)
     at weblogic.ejb20.internal.MDListener.execute(MDListener.java:425)
     at weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.java:332)
     at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:288)
     at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:3069)
     at weblogic.jms.client.JMSSession.execute(JMSSession.java:2989)
     at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:3448)
     at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)

Hi, I can tell you that you're not using any WebLogic
JDBC code. You're getting a connection directly from
the Oracle drive, and you can change the vesion of the
drive if you want by changing the ojdbc14.jar in the
weblogic server\lib directory.
However, I believe the problem is an inherent weakness
at the DBMS. The DBMS listener process can sometimes
be temporarily swamped if it gets too many connection
requests at one time, and will fail some of them even if
they are all identical and correct.
This is one of the major reasons you should use WebLogic
connection pools so you always get already-made and
tested connections.
Another huge danger is that you are using DriverManager
calls. These are very bad in multithreaded applications
like WebLogic, because all DriverManager calls (including
some internal ones that all JDBC drivers call all the time,
are class-synchronized! This means that one call to
getConnection() will probably bolock all other running
JDBC in the whole JVM. If you can change the springframework
code to use WebLogic DataSources to pools, you'll be much
better off.
Joe
Ashkan Gholam-Zadeh wrote:
I am experiencing the following exception in Weblogic 9.0 server cluster environment. The same code works fine in non-cluster environment. The problem happens every now and then and would go away temporarily after recycling the domains. The Oracle database that the backend system connects to is 9.0.2.6. I am using the ocjdbc14.jar jdbc driver that comes with the Weblogic 9.0 on the client side to connect. I really appreciate any help or clue.
Ashkan
Error on dequeuing requests
org.springframework.jdbc.CannotGetJdbcConnectionException: Could not get JDBC Connection; nested exception is java.sql.SQLException: ORA-01017: invalid username/password; logon denied
java.sql.SQLException: ORA-01017: invalid username/password; logon denied
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
     at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:289)
     at oracle.jdbc.ttc7.O3log.receive2nd(O3log.java:496)
     at oracle.jdbc.ttc7.TTC7Protocol.logon(TTC7Protocol.java:278)
     at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:346)
     at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:468)
     at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:314)
     at java.sql.DriverManager.getConnection(Ljava.lang.String;Ljava.util.Properties;Ljava.lang.ClassLoader;)Ljava.sql.Connection;(Unknown Source)
     at java.sql.DriverManager.getConnection(Ljava.lang.String;Ljava.util.Properties;)Ljava.sql.Connection;(Unknown Source)
     at org.springframework.jdbc.datasource.DriverManagerDataSource.getConnectionFromDriverManager(DriverManagerDataSource.java:291)
     at org.springframework.jdbc.datasource.DriverManagerDataSource.getConnectionFromDriverManager(DriverManagerDataSource.java:277)
     at org.springframework.jdbc.datasource.DriverManagerDataSource.getConnectionFromDriverManager(DriverManagerDataSource.java:259)
     at org.springframework.jdbc.datasource.DriverManagerDataSource.getConnection(DriverManagerDataSource.java:241)
     at org.springframework.jdbc.datasource.DataSourceUtils.doGetConnection(DataSourceUtils.java:111)
     at org.springframework.jdbc.datasource.DataSourceUtils.getConnection(DataSourceUtils.java:77)
     at org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java:810)
     at org.springframework.jdbc.core.JdbcTemplate.call(JdbcTemplate.java:857)
     at org.springframework.jdbc.object.StoredProcedure.execute(StoredProcedure.java:102)
     at com.rwi.wam.dao.serviceprovider.ServiceProviderDequeue.dequeue(ServiceProviderDequeue.java:32)
     at com.rwi.wam.dao.serviceprovider.ServiceProviderDAO.dequeueRequest(ServiceProviderDAO.java:48)
     at com.rwi.wam.ejb.WAMRequestMessageBean.onMessage(WAMRequestMessageBean.java:168)
     at weblogic.ejb20.internal.MDListener.execute(MDListener.java:425)
     at weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.java:332)
     at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:288)
     at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:3069)
     at weblogic.jms.client.JMSSession.execute(JMSSession.java:2989)
     at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:3448)
     at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)

System copy : ORA-01017: invalid username/password; logon denied

Hello SAPiens,
I have to perform a system copy of Bank analyzer 6, NW7.1, ABAP stack only on AIX 5.3, MCOD oracle 10.2.0.4 DB. I'm arriving to the sapinst parameters screen asking for the securestore key. The key is accepted, then it asks for the JAVA components DVD. An issue occurs after this step (JVM is uncompressed then tries to access the DB). Here is th UTL_load_usage :
cat UTL_load_usages.log








Aug 20, 2010 5:51:50 PM Info   : Successfully parsed!
Aug 20, 2010 5:51:50 PM Info   : Executing command Export...
Aug 20, 2010 5:51:50 PM Info   : Establishing DB connection...
Aug 20, 2010 5:51:53 PM Path   : Exception : The DataBase is down or the connection parameters are wrong: -sid=BA3 -dsn=jdbc/pool/BA3 -ssprops=/usr/sap/BA3/SYS/global/security/data/SecStore.properties -ssk=/usr/sap/BA3/SYS/global/security/data/SecStore.key -keyphrase=null
java.lang.Exception
        at com.sap.exception.BaseExceptionInfo.traceAutomatically(BaseExceptionInfo.java:1230)
        at com.sap.exception.BaseExceptionInfo.<init>(BaseExceptionInfo.java:457)
        at com.sap.exception.BaseException.<init>(BaseException.java:303)
        at com.sap.sl.ut.infoprovider.exceptions.UTInfoException.<init>(UTInfoException.java:99)
        at com.sap.sl.ut.manager.persistence.db.DataBaseInfoFactory.connect(DataBaseInfoFactory.java:373)
        at com.sap.sl.ut.manager.persistence.db.DataBaseInfoFactory.constructSystemInfo(DataBaseInfoFactory.java:776)
        at com.sap.sl.ut.manager.command.Export.executeExportKDB(Export.java:57)
        at com.sap.sl.ut.manager.command.Export.execute(Export.java:81)
        at com.sap.sl.ut.manager.command.Command.exec(Command.java:88)
        at com.sap.sl.ut.manager.UtlMain.exec(UtlMain.java:59)
        at com.sap.sl.ut.manager.UtlMain.main(UtlMain.java:55)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:161)
Caused by: java.sql.SQLException: ORA-01017: invalid username/password; logon denied
        at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
        at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:331)
        at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:283)
        at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:278)
        at oracle.jdbc.driver.T4CTTIoauthenticate.receiveOauth(T4CTTIoauthenticate.java:790)
        at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:362)
        at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:420)
        at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165)
        at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
        at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
        at com.sap.sql.connect.factory.DriverPooledConnectionFactory.createVendorConnection(DriverPooledConnectionFactory.java:50)
        at com.sap.sql.connect.factory.DriverPooledConnectionFactory.getPooledConnection(DriverPooledConnectionFactory.java:37)
        at com.sap.sql.connect.datasource.DBDataSourceImpl.createPooledConnection(DBDataSourceImpl.java:677)
        at com.sap.sql.connect.datasource.DBDataSourceImpl.newPooledConnection(DBDataSourceImpl.java:626)
        at com.sap.sql.connect.datasource.DBDataSourceImpl.getConnection(DBDataSourceImpl.java:105)
        at com.sap.sql.connect.OpenSQLDataSourceImpl.getConnection(OpenSQLDataSourceImpl.java:202)
        at com.sap.sl.ut.manager.persistence.db.DBConnection.connectViaSecureStore(DBConnection.java:159)
        at com.sap.sl.ut.manager.persistence.db.DBConnection.connect(DBConnection.java:171)
        at com.sap.sl.ut.manager.persistence.db.DataBaseInfoFactory.connect(DataBaseInfoFactory.java:371)
        at com.sap.sl.ut.manager.persistence.db.DataBaseInfoFactory.constructSystemInfo(DataBaseInfoFactory.java:776)
        at com.sap.sl.ut.manager.command.Export.executeExportKDB(Export.java:57)
        at com.sap.sl.ut.manager.command.Export.execute(Export.java:81)
        at com.sap.sl.ut.manager.command.Command.exec(Command.java:88)
        at com.sap.sl.ut.manager.UtlMain.exec(UtlMain.java:59)
        at com.sap.sl.ut.manager.UtlMain.main(UtlMain.java:55)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:161)
Aug 20, 2010 5:51:53 PM Info   : Severe (database) error. Return code: 64
I guess sapinst retreives the connection data from the securestore, but fails using it...
The DB is up and running. I checked Oracle users, none of them are locked.
Can anyone kindly advice or provide a search path for shooting this issue ?
Thank you already,
Eric

Hello Kiran,
Thank you for your advice.
the password is correct :
#/sapmnt/BA3/global/sltools> ./checkKeyPhrase.sh -f /sapmnt/BA3/global/security/data/SecStore.properties
   INFO: Loading tool launcher...
   INFO: [OS: AIX] [VM vendor: SAP AG] [VM version: 5.1.015] [VM type: SAP Java 64-Bit Server VM]
   INFO: Main class to start: "com.sap.inst.checkKeyPhrase.CheckKeyPhrase"
   INFO: Loading 27 JAR files: [./sharedlib/checkKeyPhrase.jar, ./sharedlib/jdbc.jar, ./sharedlib/jload.jar, ./sharedlib/jload_core.jar, ./sharedlib/jperflib.jar, ./sharedlib/jsizecheck.jar, ./sharedlib/sap.com~sl.ut.infoprovider_lib.jar, ./sharedlib/sap.com~sl.ut.manager.offline.jar, ./sharedlib/sap.com~tc~antlr.jar, ./sharedlib/sap.com~tc~bl~iqlib~impl.jar, ./sharedlib/sap.com~tc~bl~jdsr~jdsr.jar, ./sharedlib/sap.com~tc~bl~offline_launcher~impl.jar, ./sharedlib/sap.com~tc~bl~opensql~implStandalone.jar, ./sharedlib/sap.com~tc~bl~sl~utility.jar, ./sharedlib/sap.com~tc~dd~db~dictionarydatabase~implDictionaryDatabase.jar, ./sharedlib/sap.com~tc~exception.jar, ./sharedlib/sap.com~tc~je~configtool.jar, ./sharedlib/sap.com~tc~je~offlineconfiguration~impl.jar, ./sharedlib/sap.com~tc~logging~java~impl.jar, ./sharedlib/sap.com~tc~sapxmltoolkit~sapxmltoolkit.jar, ./sharedlib/sap.com~tc~sdt~cvl~impl.jar, ./sharedlib/sap.com~tc~sec~secstorefs~java~core.jar, ./../security/lib/tools/iaik_jce.jar, ./../security/lib/tools/iaik_jsse.jar, ./../security/lib/tools/iaik_smime.jar, ./../security/lib/tools/iaik_ssl.jar, ./../security/lib/tools/w3c_http.jar]
   INFO: Start
Key phrase::::::::::::
The key phrase is correct.
I guess sapinst is retrieving the DB password from the securestore, tries to connect but gives back the incorrect password error message. But how can that DB password be incorrect if the system is up and running?
What is the DB user name sapinst retreives from the securestore ?
Kind regards,
Eric

ORA-01017: invalid username/password; logon denied

Hello colleagues,
in TCode SM21 we've got a lot of following errors, that were repeated very often:
10:25:09 BTC 010                             BY 2 Database error 1017 at CON
10:25:09 BTC 010                             BY 0 > ORA-01017: invalid username/password; logon denied
10:25:09 BTC 010                             BY 2 Database error 1017 at CON
10:25:09 BTC 010                             BY 0 > ORA-01017: invalid username/password; logon denied
10:25:09 BTC 010                             R1 9 Initialization DB-Connect Failed, Return Code 000256
10:25:09 BTC 010                             Q0 2 Stop Workproc10, PID 3549
Background processes only affected and seems to be restarted after every attempt for connection into database.
After restart fo system (DB + ABAP) problem still persists, but does not occur that often. In productive system approximately once in every 2 hours, but is still there.
System environment:
DB: Oracle Release 10.2.0.2.0
OS: HP-UX
SAP: SAP ECC 6.0
Listener is up and running:
oraqxs   499     1 0 10:15:31 ?         0:01 /oracle/QXS/102_64/bin/tnslsnr LISTENER_QXS -inherit
R3trans working as well:
mucsx032:qxsadm 29> R3trans -d -v
This is R3trans version 6.14 (release 700 - 10.09.07 - 09:57:00).
R3trans finished (0000).
Below is extract from WP tracefile.
trc file: "dev_w10", trc level: 1, release: "700"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
M sysno      02
M sid        QXS
M systemid   274 (HP (IA-64) with HP-UX)
M relno      7000
M patchlevel 0
M patchno    133
M intno      20050900
M make:      single threaded, ASCII, 64 bit, optimized
M pid        3549
M
M
M Wed May 6 10:25:09 2009
M kernel runs with dp version 232(ext=109) (@(#) DPLIB-INT-VERSION-232)
M length of sys_adm_ext is 364 bytes
M ThInit: running on host ciqxs02
M calling db_connect ...
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPDAT's password
C Connecting as /@QXS on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 WE8DEC                                                    1 600000000299f0a0 60000000029a6a20 60000000029aa408
C Attaching to DB Server QXS (con_hdl=0,svchp=60000000029aa338,srvhp=60000000029ac688)
C Starting user session (con_hdl=0,svchp=60000000029aa338,srvhp=60000000029ac688,usrhp=60000000029a7238)
C *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1017
[dboci.c      4532]
C *** ERROR => CONNECT failed with sql error '1017'
[dbsloci.c    11044]
C Try to connect with default password
C Connecting as SAPDAT/<pwd>@QXS on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 WE8DEC                                                    1 600000000299f0a0 60000000029a6a20 60000000029aa408
C Starting user session (con_hdl=0,svchp=60000000029aa338,srvhp=60000000029ac688,usrhp=60000000029a7238)
C *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1017
[dboci.c      4532]
C *** ERROR => CONNECT failed with sql error '1017'
[dbsloci.c    11044]
B ***LOG BY2=> sql error 1017   performing CON [dbsh#2 @ 1204] [dbsh    1204 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dbsh#2 @ 1204] [dbsh    1204 ]
B ***LOG BY2=> sql error 1017   performing CON [dblink#5 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dblink#5 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1435]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10377]
M
M Info for wp 10
M
M    stat = WP_RUN
M    waiting_for = NO_WAITING
M    reqtype = DP_RQ_BTCWP
M    act_reqtype = DP_RQ_BTCWP
M    rq_info = 8576
M    tid = -1
M    mode = 255
M    len = 24
M    rq_id = 1055
M    rq_source = FROM_WP_CA
M    last_tid = 10
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    csTrack = 0
M    csTrackRwExcl = 0
M    csTrackRwShrd = 0
M    mode_cleaned_counter = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    req.vm = no VM
M    attachedVm = no VM
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   724]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 259]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc10 3549) [dpuxtool.c   259]
Do you have an idea how to get rid of this error? Did you experienced the same problem before? We will be thankful for any ideas.
Thank you all in advance.

Hi,
You did not mention abt the kerneleveland DB/SAP version details.
Chk the note 623242.
Regards.......

OCI ORA-01017: invalid username/password;logon denied

I am attempting to connect to the database through OCI, and am receiving this error:
OCI ORA-01017: invalid username/password;logon denied
I know the username and password I am using is correct. Is there some setting in the init.ora file that needs to be configured to logon through OCI?
Please Advise
Thanks,
Mike

The Entreprise manager agent trace file (emagent.trc)
contains following error. Any idea what and where to
fix this?
2007-12-31 02:21:57 Thread-316441 WARN vpxoci: OCI
Error -- ErrorCode(1017): ORA-01017: invalid
username/password; logon denied
SQL = "
CISessionBegin"...
LOGIN =
ods/<PW>@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL
=TCP)(HOST=longines)(PORT=1521)))(CONNECT_DATA=(SERVIC
E_NAME=iasdb.com)))
2007-12-31 02:21:57 Thread-316441 ERROR vpxoci:
ORA-01017: invalid username/password; logon denied
2007-12-31 02:21:57 Thread-316441 WARN vpxoci: Login
0x1587ba8 failed, error=ORA-01017: invalid
username/password; logon denied
2007-12-31 02:21:57 Thread-316441 ERROR engine:
[oracle_ldap,iasdb.longines.com_LDAP,OIDserverSecRefSu
LoginSuccCC] : nmeegd_GetMetricData failed :
ORA-01017: invalid username/password; logon denied
ThanksGo to the agent setup pages, update the Metric Collection settings for that target.

ORA-01017: invalid username/password; logon denied - in DB13

Hello,
We have upgraded successfully from SAP 4.7 / Oracle 9i to ECC 6.0/
Oracle 10g but now the jobs from DB13 are failing. Please find the
error details below.
We have followed the correction steps mentioned in notes: 400241,
437648 and 134592. But the same error persists.
Please help us resolve the issue ASAP.
Error Details:
Job started
Step 001 started (program RSDBAJOB, variant &0000000000201, user ID PWCBASIS)
Execute logical command BRCONNECT On host eccdev
Parameters: -u / -jid CHECK20081107160528 -c -f check
BR0801I BRCONNECT 7.00 (32)
BR0805I Start of BRCONNECT processing: cdzezhoc.chk 2008-11-07 16.05.30
BR0484I BRCONNECT log file: /oracle/DEV/sapcheck/cdzezhoc.chk
BR0280I BRCONNECT time stamp: 2008-11-07 16.05.30
BR0301E SQL error -1017 at location db_connect-2,SQL statement:
'CONNECT /'
ORA-01017: invalid username/password; logon denied
BR0310E Connect to database instance DEV failed
BR0280I BRCONNECT time stamp: 2008-11-07 16.05.30
BR0301E SQL error -1017 at location db_connect-2,SQL statement:
'CONNECT /'
ORA-01017: invalid username/password; logon denied
BR0310E Connect to database instance DEV failed
BR0806I End of BRCONNECT processing: cdzezhoc.chk2008-11-07 16.05.30
BR0280I BRCONNECT time stamp: 2008-11-07 16.05.30
BR0804I BRCONNECT terminated with errors
External program terminated with exit code 3
BRCONNECT returned error status E
Job finished
Please help me resolve this issue....
Thanks

Hi ,
Yes am able to execute brtools from both the users, viz <sid>adm and ora<sid>. And also able to execute all the scripts from there itself.
For your refrence, find the logs form /usr/sap/DEV/DVEBMGS00/work/dev_w0 file.
Thu Nov 20 13:22:34 2008
M kernel runs with dp version 241(ext=110) (@(#) DPLIB-INT-VERSION-241)
M length of sys_adm_ext is 364 bytes
M ***LOG Q01=> ThInit, WPStart (Workproc 0 1 10354) [thxxhead.c   1290]
M ThInit: running on host eccdev
M calling db_connect ...
C Oracle Client Version: '10.2.0.2.0'
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPPRD's password
C Connecting as /@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 WE8DEC                                                    1 10595f0a0 105966b40 10596a4e8
C Attaching to DB Server DEV (con_hdl=0,svchp=10596a418,srvhp=10596c748)
C Starting user session (con_hdl=0,svchp=10596a418,srvhp=10596c748,usrhp=105967358)
C *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1017
[dboci.c      4532]
C *** ERROR => CONNECT failed with sql error '1017'
[dbsloci.c    11145]
C Try to connect with default password
C Connecting as SAPPRD/<pwd>@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 WE8DEC                                                    1 10595f0a0 105966b40 10596a4e8
C Starting user session (con_hdl=0,svchp=10596a418,srvhp=10596c748,usrhp=105967358)
C
Please suggest,
Kshitiz Goyal

ORA-01017: invalid username/password; logon denied quality system refresh from production

Dear All;
I am in the post activities of SAP system refresh.
I restored the system using brtools successfully as you can see below:
then I went with the rest of the steps based on sap recomendations, and reached to SAP sql queries:
CREATE USER "OPS$<DOMAIN>\<SID>ADM" DEFAULT TABLESPACE SYSTEM TEMPORARY TABLESPACE PSAPTEMP IDENTIFIED EXTERNALLY;
CREATE USER "OPS$<DOMAIN>\SAPSERVICE<SID>" DEFAULT TABLESPACE SYSTEM TEMPORARY TABLESPACE PSAPTEMP IDENTIFIED EXTERNALLY;
GRANT CONNECT, RESOURCE, SAPDBA TO "OPS$<DOMAIN>\<SID>ADM";
GRANT CONNECT, RESOURCE, SAPDBA TO "OPS$<DOMAIN>\SAPSERVICE<SID>";
CREATE TABLE "OPS$<DOMAIN>\<SID>ADM".SAPUSER (USERID VARCHAR2(256), PASSWD VARCHAR2(256));
INSERT INTO "OPS$<DOMAIN>\<SID>ADM".SAPUSER VALUES ('SAPSR3', '<Password>');
CREATE SYNONYM "OPS$<DOMAIN>\SAPSERVICE<SID>".SAPUSER FOR "OPS$<DOMAIN>\<SID>ADM".SAPUSER;
CONNECT /
GRANT SELECT, UPDATE ON "OPS$<DOMAIN>\<SID>ADM".SAPUSER TO "OPS$<DOMAIN>\SAPSERVICE<SID>";
CONNECT /as sysdba
GRANT CONNECT, RESOURCE TO "OPS$<DOMAIN>\SAPSERVICE<SID>";
GRANT CONNECT, RESOURCE TO "OPS$<DOMAIN>\<SID>ADM";
I checked if all users are on opened state using select USERNAME,ACCOUNT_STATUS from dba_users;
The database is running file, and it is opened, but when I run R3trans -d it gives me RC 12 and i get this error:
*** ERROR => CONNECT failed with sql error '1017'
set_ocica() -> SQL error code 1017
-->oci_get_errmsg (con=0, rc=1017)
OCIErrorGet -> SQL error code: 1017
ORA-01017: invalid username/password; logon denied
DbSlConnect(con=0) -> orc=0, 99=DBSL_ERR_DB
***LOG BY2=>sql error 1017   performing CON
***LOG BY0=>ORA-01017: invalid username/password; logon denied
I used brconnect -u / -f chpass -o PSAPSR3 -p sap so i can reset the password, but still I am getting the same invalid username or password error.
I checked the listener status, and it is running.
Kindly let me know how I can fix my error
Best Regards
~Amal Aloun

Dear Gaurav;
I am running SAP Kernel 720 64bit unicode PL300
The content of my trans log file is the following:
4 ETW000 r3trans version 6.23 (release 720 - 15.05.12 - 20:12:03).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 05.08.2014 - 17:50:30
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [     dev trc,00000] Tue Aug 05 17:50:30 2014                                                 149 0.000149
4 ETW000 [     dev trc,00000] db_con_init called                                                        27 0.000176
4 ETW000 [     dev trc,00000] set_use_ext_con_info(): rsdb/ssfs_connect not set => ssfs not used        41 0.000217
4 ETW000 [     dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000                                                                                                  28 0.000245
4 ETW000 [     dev trc,00000] create_con (con_name=R/3)                                                 14 0.000259
4 ETW000 [     dev trc,00000] Loading DB library 'dboraslib.dll' ...                                    44 0.000303
4 ETW000 [     dev trc,00000] DlLoadLib success: LoadLibrary("dboraslib.dll"), hdl 0, addr 000007FEF1650000
4 ETW000                                                                                                 947 0.001250
4 ETW000 [     dev trc,00000]      using "E:\usr\sap\TST\SYS\exe\uc\NTAMD64\dboraslib.dll"               18 0.001268
4 ETW000 [     dev trc,00000] Library 'dboraslib.dll' loaded                                            19 0.001287
4 ETW000 [     dev trc,00000] function DbSlExpFuns loaded from library dboraslib.dll                    23 0.001310
4 ETW000 [     dev trc,00000] Version of 'dboraslib.dll' is "720.00", patchlevel (0.215)               242 0.001552
4 ETW000 [     dev trc,00000] function dsql_db_init loaded from library dboraslib.dll                   26 0.001578
4 ETW000 [     dev trc,00000] function dbdd_exp_funs loaded from library dboraslib.dll                  34 0.001612
4 ETW000 [     dev trc,00000] New connection 0 created                                                 237 0.001849
4 ETW000 [     dev trc,00000] 0: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , bc = NO , hc = NO , perm = YES, reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000                                                                                                  56 0.001905
4 ETW000 [     dev trc,00000] db_con_connect (con_name=R/3)                                             20 0.001925
4 ETW000 [     dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000                                                                                                  25 0.001950
4 ETW000 [     dev trc,00000] find_con_by_name found the following connection:                          16 0.001966
4 ETW000 [     dev trc,00000] 0: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , bc = NO , hc = NO , perm = YES, reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000                                                                                                  36 0.002002
4 ETW000 [     dev trc,00000] -->DbSlConnect(vers=-1, type=0, env='[default env]', userid='[default usr]')
4 ETW000                                                                                                  53 0.002055
4 ETW000 [     dev trc,00000] DIR_CLIENT_ORAHOME is not set as profile nor env. parameter.             574 0.002629
4 ETW000                        Assuming using instant client with unspecified location.
4 ETW000 [     dev trc,00000] Register application info.                                                97 0.002726
4 ETW000 [     dev trc,00000] Oracle client version: 10.2.0.4.0, (dbsl 720 220612, UNICODE[2])       10033 0.012759
4 ETW000 [     dev trc,00000] Detailed Oracle client (patch) info not available.                        30 0.012789
4 ETW000 [     dev trc,00000]    Default connection: tnsname ='TST'                                      73 0.012862
4 ETW000 [     dev trc,00000] -->oci_initialize(con=0, char='UTF16', nchar='AL16UTF16', nls=-1),uc_ln=2
4 ETW000                                                                                                  50 0.012912
4 ETW000 [     dev trc,00000] OCIEnvCreate(mode=16384=OCI_UTF16) returned 0 (for default NLS handle)
4 ETW000                                                                                                1828 0.014740
4 ETW000 [     dev trc,00000]     OCIHandleAlloc(OCI_HTYPE_ERROR, con=0, ErrHp=027944B0)                 58 0.014798
4 ETW000 [     dev trc,00000]     OCIHandleAlloc(OCI_HTYPE_ERROR, con=0, ErrBt=02796088)                 36 0.014834
4 ETW000 [     dev trc,00000] NLS env. settings: lang=41004D00450052004900430041004E00                 167 0.015001
4 ETW000 [     dev trc,00000]                     terr=41004D0045005200490043004100                      29 0.015030
4 ETW000 [     dev trc,00000]                     char=55005400460031003600                              22 0.015052
4 ETW000 [     dev trc,00000] Client NLS setting (by OCINlsGetInfo(con=0)): 'AMERICAN_AMERICA.UTF16'
4 ETW000                                                                                                  43 0.015095
4 ETW000 [     dev trc,00000] charset='UTF16', ncharset='AL16UTF16', UNI_ASC=FALSE                      19 0.015114
4 ETW000 [     dev trc,00000] Logon as OPS$-user to get SAPSR3's password                               28 0.015142
4 ETW000 [     dev trc,00000] Connecting as /@TST on connection 0 (nls 0) ... (dbsl 720 220612, UNICODE[2])
4 ETW000                                                                                                  61 0.015203
4 ETW000 [     dev trc,00000]     OCIHandleAlloc(OCI_HTYPE_SVCCTX, con=0, svchp=02795F48)               370 0.015573
4 ETW000 [     dev trc,00000] Allocating server context handle                                          31 0.015604
4 ETW000 [     dev trc,00000] Attaching to database server TST (con=0, svchp=02795F48, srvhp=0279EFF8)
4 ETW000                                                                                                  74 0.015678
4 ETW000 [     dev trc,00000] Assigning server context 0279EFF8 to service context 02795F48          30008 0.045686
4 ETW000 [     dev trc,00000]     OCIHandleAlloc(OCI_HTYPE_SESSION, con=0, usrhp=027ABBE0)               86 0.045772
4 ETW000 [     dev trc,00000] Starting user session: OCISessionBegin(con=0, usr='/', svc=02795F48, srv=0279EFF8, usr=027ABBE0)
4 ETW000                                                                                                  40 0.045812
4 ETW000 [     dev trc,00000]     OCISessionBegin(OCI_DEFAULT) failed with -1=OCI_ERROR               28164 0.073976
4 ETW000 [     dev trc,00000]     OCISessionBegin(OCI_DEFAULT) failed with SQL error 1017:               95 0.074071
4 ETW000 [     dev trc,00000]     ORA-01017: invalid username/password; logon denied
4 ETW000                                                                                                  39 0.074110
4 ETW000 [    dbsloci.,00000] *** ERROR => CONNECT failed with sql error '1017'                         38 0.074148
4 ETW000 [     dev trc,00000]     set_ocica() -> SQL error code 1017                                     19 0.074167
4 ETW000 [     dev trc,00000] -->oci_get_errmsg (con=0, rc=1017)                                        20 0.074187
4 ETW000 [     dev trc,00000]     OCIErrorGet -> SQL error code: 1017                                    57 0.074244
4 ETW000 [     dev trc,00000]     ORA-01017: invalid username/password; logon denied
4 ETW000                                                                                                  39 0.074283
4 ETW000 [     dev trc,00000] Info: 99=DBSL_ERR_DB, oerr=1017, try to connect with default password.
4 ETW000                                                                                                  38 0.074321
4 ETW000 [     dev trc,00000] Connecting as SAPSR3/<pwd>@TST on connection 0 (nls 0) ... (dbsl 720 220612, UNICODE[2])
4 ETW000                                                                                                  30 0.074351
4 ETW000 [     dev trc,00000] Assigning username to user session: con=0, usrhp= 027ABBE0                23 0.074374
4 ETW000 [     dev trc,00000] Assigning password to user session: con=0, usrhp=027ABBE0                 36 0.074410
4 ETW000 [     dev trc,00000] Starting user session: OCISessionBegin(con=0, usr='SAPSR3', svc=02795F48, srv=0279EFF8, usr=027ABBE0)
4 ETW000                                                                                                 133 0.074543
4 ETW000 [     dev trc,00000] Tue Aug 05 17:50:40 2014                                             9992977 10.067520
4 ETW000 [     dev trc,00000]     OCISessionBegin(OCI_DEFAULT) failed with -1=OCI_ERROR                  33 10.067553
4 ETW000 [     dev trc,00000]     OCISessionBegin(OCI_DEFAULT) failed with SQL error 1017:               85 10.067638
4 ETW000 [     dev trc,00000]     ORA-01017: invalid username/password; logon denied
4 ETW000                                                                                                  37 10.067675
4 ETW000 [    dbsloci.,00000] *** ERROR => CONNECT failed with sql error '1017'                         29 10.067704
4 ETW000 [     dev trc,00000]     set_ocica() -> SQL error code 1017                                     19 10.067723
4 ETW000 [     dev trc,00000] -->oci_get_errmsg (con=0, rc=1017)                                        18 10.067741
4 ETW000 [     dev trc,00000]     OCIErrorGet -> SQL error code: 1017                                    55 10.067796
4 ETW000 [     dev trc,00000]     ORA-01017: invalid username/password; logon denied
4 ETW000                                                                                                  52 10.067848
4 ETW000 [     dev trc,00000]     DbSlConnect(con=0) -> orc=0, 99=DBSL_ERR_DB                            22 10.067870
4 ETW000 [    dblink ,00000] ***LOG BY2=>sql error 1017   performing CON                               58 10.067928
4 ETW000 [    dblink ,00000] ***LOG BY0=>ORA-01017: invalid username/password; logon denied            22 10.067950
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'TST'"
Best Regards
~Amal Aloun

ORA-01017: invalid username/password; logon denied from EM 12c

Hi:
I saw one of our databases in the EM 12c has red arrow. When I clicked on the database, on top of the screen says "ORA-01017: invalid username/password; logon denied". I have checked dbsnmp and it was blocked so I unblocked it and reset the password. The system password is good. Would you please some one tell me what is the problem?

870765 wrote:
Hi:
I saw one of our databases in the EM 12c has red arrow. When I clicked on the database, on top of the screen says "ORA-01017: invalid username/password; logon denied". I have checked dbsnmp and it was blocked so I unblocked it and reset the password. The system password is good. Would you please some one tell me what is the problem?Please see these docs.
EM 12c DBSNMP Failed Login Attempt constantl Reported (ORA-01017) by Audit Software [ID 1524694.1]
Grid Control shows Metric Collection Error ORA-1017 for Database Target [ID 300912.1]
Eoblem: Database Metric Collections Fail With Ora-1017 Errors In emagent.trc [ID 272556.1]
EMCA 11g Fails With Error "ORA-01017: invalid username/password; logon denied" and "invalid username/password; For DBSNMP or SYSMAN User" [ID 741530.1]
How to Set Credentials in Grid Control 12c for E-Business Suite Plug-in [ID 1490884.1]
Thanks,
Hussein

ORA-01017: invalid username/password; logon denied in Standby Server

Hello,
In Standby Server , when executing logs applying process it shows an error.
It happens suddenly
Now logs from PRD to standby is not applying.
Error log is as follows:
BR0002I BRARCHIVE 7.00 (42)
BR0006I Start of offline redo log processing: aehrjpck.svd 2012-01-17 08.38.34
BR0484I BRARCHIVE log file: /oracle/PRD/saparch/aehrjpck.svd
BR0280I BRARCHIVE time stamp: 2012-01-17 08.38.34
BR0301W SQL error -1017 at location BrDbConnect-2, SQL statement:
'CONNECT system/********@PRD.WORLD'
ORA-01017: invalid username/password; logon denied
BR0310W Connect to database instance PRD/PRIMARY failed.
BR0338E Applying offline redo log file /oracle/PRD/oraarch/standby/PRDarch1_24090_696018700.dbf failed
BR0338E Applying offline redo log file /oracle/PRD/oraarch/standby/PRDarch1_24091_696018700.dbf failed
BR0016I 0 offline redo log files processed, total size 0.000 MB
BR0280I BRARCHIVE time stamp: 2012-01-17 08.38.36
BR0301W SQL error -1017 at location BrDbConnect-2, SQL statement:
'CONNECT system/********@PRD.WORLD'
ORA-01017: invalid username/password; logon denied
BR0310W Connect to database instance PRD/PRIMARY failed
BR0007I End of offline redo log processing: aehrjpck.svd 2012-01-17 08.38.36
BR0280I BRARCHIVE time stamp: 2012-01-17 08.38.36
BR0005I BRARCHIVE terminated with errors
Standby DB is in mount state
I have checked from v$instance.
# select status from v$instance;
MOUNTED
Logs applying commadt is as follows;
# brarchive -u system/systempwd -c -f -d disk -m 30 -sd
How can i check whether , the status of SYSTEM user?
Since Standby is in mount state, im not allowed to query DBA_USERS
How can i check whether , SYSTEM user is locked or not.
Is it possible to change the password of SYSTEM , while DB is in mount state.
I have tried like this;
#sqlplus
/ as sysdba
<It logon as sys - success>
conn SYSTEM
Enter password: systempwd
ERROR:
ORA-01033: ORACLE Initialization or shutdown in progress
Warning: You are not longer connected to ORACLE
Im not able to connect as SYSTEM user.
What should be the solution for this;
regards,
Zerandib

Is it possible to maintain different passwords for users in Standby and PrimaryFor SYSTEM user, you don't need to worry because when you change SYSTEM user password on primary, it will automatically be updated on the standby because password is saved in data dictionary and data dictionary change is also propagated at the standby standby site. More importantly, you will not be able to perform any data change on standby site in any case (password change of any user other than SYSDBA is a "data change" actually)
For SYS password, no you can't have a different password on primary and standby site(s)
Salman

Brconnect fails :ORA-01017: invalid username/password; logon denied

Hi,
BRtools not working.
C:\Documents and Settings\r47adm>sqlplus /
SQL*Plus: Release 10.2.0.4.0 - Production on Tue Sep 14 14:31:44 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
ERROR:
ORA-01017: invalid username/password; logon denied
Sap is able to connect with default password for schema id.
Tried the Note 400241 - Problems with ops$ or sapr3 connect to Oracle
still the brtools are failing with ora 1017
Trans.log;
Logon as OPS$-user to get SAPR47's password           18 0.019364
4 ETW000 [dev trc     ,00000] Connecting as /@R47 on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
4 ETW000                                                                              27 0.019391
4 ETW000 [dev trc     ,00000] Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
4 ETW000                                                                              27 0.019418
4 ETW000 [dev trc     ,00000]    0 UTF8                                                      1 000000000755F090 00000000003157A0 000000000031AF68
4 ETW000                                                                              95 0.019513
4 ETW000 [dev trc     ,00000] Allocating service context handle for con_hdl=0       23 0.019536
4 ETW000 [dev trc     ,00000] Allocating server context handle                      15 0.019551
4 ETW000 [dev trc     ,00000] Attaching to DB Server R47 (con_hdl=0,svchp=000000000031AE28,srvhp=000000000757E0E8)
4 ETW000                                                                              47 0.019598
4 ETW000 [dev trc     ,00000] Assigning server context 000000000757E0E8 to service context 000000000031AE28
4 ETW000                                                                           35921 0.055519
4 ETW000 [dev trc     ,00000] Allocating user session handle                        32 0.055551
4 ETW000 [dev trc     ,00000] Starting user session (con_hdl=0,svchp=000000000031AE28,srvhp=000000000757E0E8,usrhp=0000000000315FB8)
4 ETW000                                                                              34 0.055585
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1017
4 ETW000                                                                           60400 0.115985
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000                                                                              35 0.116020
4 ETW000 [dev trc     ,00000]     set_ocica() -> OCI or SQL return code 1017         17 0.116037
4 ETW000 [dev trc     ,00000] Try to connect with default password                  56 0.116093
4 ETW000 [dev trc     ,00000] Connecting as SAPR47/<pwd>@R47 on connection 0 (nls_hdl 0) ... (dbsl 700 250407)

I faced Issue with OPS$ user mechanism in two scenario
Unable to create/delete user as identifier exceeds 30 characters
1. The installation terminates when you create the OPS$ users (step
ORADBUSER_NT_ORA)
As per SAP Note 314671 - Long WINDOWS domain names and Oracle 8.1.x or higher
   Set the parameter os_authent_prefix = "" In parameter file initR47.ora
Restart the DB for parameter to take effect then continue with installation
2. the system does not start because the OPS$ users were not created correctly.
    You can set the default password for SCHEMAID (SAP<SID>) in table sapuser table. Hence the work process connects with default password and you can run the system smoothly.but the brtools (brconnect DB13) will fail as they try to connect using (Connect /) ops$ user
By setting the parameter os_authent_prefix = "" and running the ORADBUSR.SQL SQL did not work.
We can avoid this by setting parameter os_authent_prefix = O$
This reduces the username by two characters (OPS$CTSGVCSAPBL09\SAPSERVICER47 to O$CTSGVCSAPBL09\SAPSERVICER47)

ORA-01017: invalid username/password; logon denied - Database Link

Hi Guys,
Could you help me, I have a problem connecting to another database using the database link:
*1. I added in tnsnanes.ora of "client" database DEV2*
DEV =
+(DESCRIPTION =+
+(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.100.85)(PORT = 1521))+
+(CONNECT_DATA =+
+(SID = DEVDB)+
+)+
+)+
*2. I tested my connection using tnsping*
oracle@dev> tnsping dev
TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 10-JUL-2010 14:35:35
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
+/opt/oracle/product/10.2/db_1/network/admin/sqlnet.ora+
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.100.85)(PORT = 1521)) (CONNECT_DATA = (SID = DEVDB)))
OK (0 msec)
oracle@dev>
*3. In SQLPLUS of DEV2 I connect to my database using the tnsnames entry*
SQL> conn devuser/pwd001@dev
Connected.
*4. I then create a database link.*
SQL> Create Database Link dev_Link
+2 Connect to devuser+
+3 identified by pwd001+
+4 using 'DEV';+
Database link created.
SQL>
*5. When I try to connect to the database using the database link I get an error, but I am very sure the username ans password are ok.*
SQL> select * from global_name@dev_link;
select * from global_name@dev_link
*+
ERROR at line 1:
ORA-01017: invalid username/password; logon denied
ORA-02063: preceding line from DEV_LINK
SQL>
What could be wrong......??

4. I then create a database link.
SQL> Create Database Link dev_Link
2 Connect to devuser
3 identified by pwd001
4 using 'DEV';create DATABASE LINK USING <connect-string>
your sid is DEVDB so create dblink using oracle_sid
If you specify only the database name, then Oracle Database implicitly appends the database domain to the connect string to create a complete service name. Therefore, if the database domain of the remote database is different from that of the current database, then you must specify the complete service name.
Edited by: rajeysh on Jul 10, 2010 7:28 PM

Deployment error: ORA-01017: invalid username/password; logon denied

Hi,
I created a new target schema against an existing runtime owner user id and runtime access user id.
But deploying the mapping now gives error as follows:
<<ORA-01017: invalid username/password; logon denied>>
Can you please guide where the problem is?
Thanks & Regards,
Lenin

Hi,
Just to add some more informations about this topic. I created one extra target schema for the same runtime user id/runtime access user. And then tried to deploy the mapping and got the above error. And again, I removed the older target schema by using "OWB Runtime Assistant". And then tried to deploy mapping again and got the same error again.
Can you please help me out in this case?
Thanks & Regards,
Lenin

[Oracle][ODBC][Ora]ORA-01017: invalid username/password; logon denied

---cmd prompt------------------------
H:\>sqlplus scott/tiger
SQL*Plus: Release 10.2.0.3.0 - Production on Sun Mar 28 16:54:53 2010
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL>
-------------ASP -------------------------
<%@ Language="JScript" %>
<%
     var uname=Request.Form("un");
     var upwd=Request.Form("pwd");
     Response.Write("User Name is " + uname + "<br>" + "password is " + upwd);
     var sql = "select * from emp";
     var conn = Server.CreateObject("ADODB.Connection");
     var rs = Server.CreateObject("ADODB.Recordset");
     conn.Open = "Driver={Oracle in OraDb10g_home1};DBQ=tcp;UID='uname';PWD='upwd';";
     rs.Open(sql, conn, 3, 3);
%>
------------------Error------------------
User Name is scott
Password is tiger
Microsoft OLE DB Provider for ODBC Drivers error '80040e4d'
[Oracle][ODBC][Ora]ORA-01017: invalid username/password; logon denied
/prc/main.asp, line 11
variable uname has valid username that is 'scott' and variable upwd as valid password ie 'tiger' both entered by the user.
with the same username and password i am able to connect to the database from the command prompt.
but when i tried using odbc through ASP(javascript) i am getting above error.
and one more thing if i mention username and password directly in UID and PWD it works but when i pass it through variables it wont work.
since variables have username and password it has to take from it directly...........manually i cant give,dynamically it has to take.
plz help me out....how i can pass the parameter to that UID and PWD.
conn.Open = "Driver={Oracle in OraDb10g_home1};DBQ=tcp;UID='uname';PWD='upwd';";
help plz
conn.Open = "Driver={Oracle in OraDb10g_home1};DBQ=tcp;UID='uname';PWD='upwd';"; --- does not work
conn.Open = "Driver={Oracle in OraDb10g_home1};DBQ=tcp;UID=scott;PWD=tiger;"; --- works
but i want the 1st statement to work........since user gives the password and username dynamically.
Thanks
Veeresh S

conn.Open("DSN=tcp;UID="+uname+";PWD="+upwd+";");
this solved me
thanks for all who had vied this..
veeresh

OracleException ORA-1017: invalid username/password; logon denied at Oracle

Similar Messages

Maybe you are looking for