Orange Pay Monthly 3G Roaming Problem (with Roaming data added)

Last year went to Hannover from UK and switched on the 3G and roaming and picked up the local network no issues and 3G activated and all data worked fine.  This weekend went back to Hannover and when in hotel switched on 3G and roaming and connected to then network but no 3G icon.  Tried to switch off and back on, changed from Telekon.de to E-Plus and they all connected to the Network but no 3G.  Called Orange and spoke to their Ipad technical department and we went through Level 1 diagnostics from resetting the network adaptor to manually choosing one of the above mobile operators and then manually choosing the other, switching of the wifi to doing a reset (holding down power button and screen button until apple icon came on and it reset all to no avail, they sent a text message update which didn’t work so I spoke to Orange Level 2 diagnostic who went through the same things as Level 1 and basically said that it was the German network that was causing the problem and could not help.
However I was sat next to a colleague who has exactly the same Ipad and was connected to E-Plus and had been connected to Telekon.de and was happily showing the 3G icon and was using it without problem.  Orange Level 2 suggested we swopped sim cards and this resulted in my Ipad still showing the mobile operator but not getting the 3G signal and at the same time my colleagues Ipad showing the Mobile operator but not getting the 3G.
When back in the UK switched Ipad on and kept getting a messaging saying that my Network Setting could not be used chose another Network, it seemed to struggle to find Orange but eventually did and 3G connected!!
So works first time in Hannover and second time no 3G, the only thing that I can think of that I did differently this time was to switch the Ipad into airplane mode (from memory last time I simply switched of the 3G and wifi and put to sleep) and that this may have caused a problem.  However I am going to China (other colleagues have been there and there Ipads all worked on 3G roaming) in Mar and need the 3G to work on roaming otherwise I will be carrying a somewhat expensive paperweight around with me until I can access any wifi.
Any help/advise will be appreciated accepting that I cannot actually check the roaming 3G until I get into China!

Was Data Roaming switched ON?
It'll be a lot cheaper to use a local Pre-paid SIM.
Roaming can cost one arm and two legs.

Similar Messages

  • Help with Internet Settings for Blackberry Curve 8520 On Orange Pay-Monthly

    I need help with my internet settings I'm currently on Orange Pay-Monthly and have recently bought a second hand Blackberry Curve 8520 which is unlocked but used to be on 02! I don't have a clue on what to do or where to start all I know is in the top right hand corner where the signal bar is it says GPRS and WIFI ! I don't want WIFI as I don't have a wireless connection and would like to get the settings for my curve so I can browse the internet and go on Facebook etc and BBM!! I've clicked on the internet logo in the menu bar but it just say's hotspot browser.. but wont let me browse!! Some one please help me !! 

    Hey BaByPaW1990,
    Welcome to the BlackBerry Support Community Forums.
    Thanks for the question.
    You can get your APN settings from your network service provider, also make sure you have a BlackBerry data plan.  
    Let me know if you have any more questions.
    Cheers.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • Problem with billing date at closed period

    Hi
    We have a problem with billing date in transaction . Previously we could set up different (earlier) billing date than the actual posting period and now it is not working. We receive an error message that the posting period is closed ) .
    I attached an example invoice which we managed to post and where you can see what Iu2019m thinking about, parking number: 1024337, BILLING DOCUMENT: 841835. In this case the billing date was at 30.11.2007, but the posting in 15.07.2008 and we managed to post.
    Pls help that issue
    yps

    hi,
    it is due to posting period closed for the month of 07/2008.
    u need to open posting during that period.
    Regards,
    Greeshma

  • Problem with Java Dates and UPDATE for SQL2000

    I am having problems with the date formats for Java. I am trying to put the current date time into a SQL table, here it the code I am using:
    var Today = new Date()
    var conn = Server.CreateObject( "ADODB.Connection" )
    conn.Open( "Provider=SQLOLEDB;Server=(local);Database=BillTracking;UID=sa;PWD=;")
    var sql = "UPDATE BillAssignments SET DatePosted = " + Today + " WHERE AssignmentID = '" + Request.QueryString("AssignmentID") + "'"
    var rs = conn.execute(sql)
    I keep getting different errors and I have been unable to find a solution yet. I know that I need to change the date format from the Java standard to the one that SQL likes.
    Help....
    Norm...

    Please tell us where the Java part of this comes in. I see that you are using JavaScript to load up data via an ADO connection (presumably on an IIS platform) - but I do not see where you are using Java
    Lee

  • Facing problem with a date column in select query

    Hi,
    I am facing problem with a date column. Below is my query and its fainling with " invalid number format model" .
    Query: SELECT *
    FROM EMP
    WHERE trunc(LAST_UPDATED) >= to_date(to_char(22-05-2009,'dd-mm-yyyy'),'dd-mm-yyyy')
    LAST_UPDATED column is "DATE" data type.
    Please help me Thanks

    Radhakrishna Sarma wrote:
    SeánMacGC wrote:
    WHERE LAST_UPDATED >= to_date('22-05-2009','dd-mm-yyyy');
    You do not need the TRUNC here in any case.
    I don't think so. What if the user wants only data for 22nd May and the table has records with date later than 22nd also? In that case your query willl not work. In order for the Index to work, I think the query can be written like this I think Sean is right though. Use of TRUNC Function is quiet useless based on the condition given here, since the to_date Function used by OP will always point to midnight of the specified date, in this case 22-05-2009 00:00:00.
    Regards,
    Jo
    Edit: I think Sean proved his point... ;)

  • Problem with loading data to Essbase

    Hi All,
    I have a problem with loading data into Essbase. I've prepared maxl script to load the data, calling rule file. The source table is located in RDBMS Oracle. The script works correctly, ie. generally loads data into Essbase.
    But the problem lies in the fact, that after deletion of data from Essbase, when I'm trying to load it again from the source table I get the message: WARNING - 1003035 - No data values modified by load of this data file - although there is no data in Essbase... I've also tried to change the mode of loading data from 'overwrite' to 'add to existing values' (in rule file) but it does'nt help ... Any ideas what can I do?

    Below few lines from EPM_ORACLE_INSTANCE/diagnostics/logs/essbase/dataload_ODL.err:
    [2013-09-24T12:01:40.480-10:01] [ESSBASE0] [AGENT-1160] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1116830016] Received Validate Login Session request
    [2013-09-24T12:01:40.482-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1114724672] Received client request: Get App and Database Status (from user [admin@Native Directory])
    [2013-09-24T12:01:54.488-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1101564224] Received client request: MaxL: Execute (from user [admin@Native Directory])
    [2013-09-24T12:01:54.492-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1115777344] Received client request: MaxL: Describe (from user [admin@Native Directory])
    [2013-09-24T12:01:54.492-10:01] [ESSBASE0] [MLEXEC-2] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1115777344] Output columns described
    [2013-09-24T12:01:54.494-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1102616896] Received client request: MaxL: Define (from user [admin@Native Directory])
    [2013-09-24T12:01:54.494-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1102616896] Received client request: MaxL: Fetch (from user [admin@Native Directory])
    [2013-09-24T12:01:54.494-10:01] [ESSBASE0] [MLEXEC-3] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1102616896] Record(s) fetched
    [2013-09-24T12:01:54.496-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1116830016] Received client request: MaxL: Fetch (from user [admin@Native Directory])
    [2013-09-24T12:01:54.498-10:01] [ESSBASE0] [AGENT-1160] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1114724672] Received Validate Login Session request
    [2013-09-24T12:01:54.499-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1101564224] Received client request: Get Application State (from user [admin@Native Directory])

  • Problem with the date conversion

    Hi Friends,
    i am facing the problem with the date conversion,  Actuall my requirement is to pass the date to the screen based on the user setting roles(SU01).
    I have fetched the user setting date format by using the funciton module SUSR_GET_USER_DEFAULTS, The function module picks the exact user date setting (Like as MM/DD/YYYY, MM.DD.YYYY, DD.MM.YY).
    After that i have implemented the FORMAT_DATE_4_OUTPUT funciton module for converting of the user role setting date format into system  date format.
    for the english language case the funciton module FORMAT_DATE_4_OUTPUT works fine but the funciton module not supported for other languages
    Can you please provide the Function Moudle for user setting date conversion.
    The funciton module is most important for us,
    Thanks
    Charan
    Moderator message: date conversion questions = FAQ, please search before posting.
    Edited by: Thomas Zloch on Dec 21, 2010 2:19 PM

    Hope this logic helps you.
    DATA LF_DATE    TYPE DATS VALUE '21122010'. " 21-dec-2010
    DATA LF_DATE_BI(10).
    WRITE LF_DATE TO LF_DATE_BI.  "Now LF_DATE_BI contains the date in user format
    "Now populate the value LF_DATE_BI to the screen field

  • PSP: problems with viewing data

    Hello.
    I'm currently working at on-line shop and have some problems with viewing data from database. When there is no much inserts to table its working very well. But after inserting all Inserts I have its acting weird.
    Sample with 10 INSERTS:
    http://gafgarion.atspace.com/psp/1.jpg
    Sample with 100 INSERTS:
    http://gafgarion.atspace.com/psp/2.jpg
    I'm using Oracle 9i. when I have more data in my database its acting weird. There is SELECT only from one table, but sometimes I have data from other tables aswell.
    I didnt touch any config files or something else. Only created new User and DAD.
    any ideas what should I do to fix that ??
    thnx in advice

    Hello,
    My guess is that you are speaking about PLSQL Server Pages (PSP), and the PLSQL Web Toolkit.
    This is why I do not think that you will have lot of answer since this forum is targeted toward Web Services developer (XML, SOAP, and so on)
    I am inviting you to ask your question on the general Oracle Application Server - General or PLSQL forums.
    Regards
    Tugdual Grall

  • Problems with retrieving data from tables with 240 and more records

    Hi,
    I've been connecting to Oracle 11g Server (not sure exact version) using Oracle 10.1.0 Client and O10 Oracle 10g driver. Everything was ok.
    I installed Oracle 11.2.0 Client and I started to have problems with retrieving data from tables.
    First I used the same connection string, driver and so on (O10 Oracle 10g) then I tried ORA Oracle but with no luck. The result is like this:
    I'm able to connect to database. I'm able to retrieve data but from small tables (e.g. with 110 records it works perfectly using both O10 and ORA drivers). When I try to retrieve data from tables with like 240 and more records retrieval simply hangs (nothing happens at all - no error, no timeout). Application seems to hang forever.
    I'm using Powerbuilder to connect to Database (either PB10.5 using O10 driver or PB12 using ORA driver). I used DBTrace, so I see that query hangs on the first FETCH.
    So for the retrievals that hang I have something like:
    (3260008): BIND SELECT OUTPUT BUFFER (DataWindow):(DBI_SELBIND) (0.186 MS / 18978.709 MS)
    (3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=0
    (3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=1
    (3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=0
    (3260008): EXECUTE:(DBI_DW_EXECUTE) (192.982 MS / 19171.691 MS)
    (3260008): FETCH NEXT:(DBI_FETCHNEXT)
    and this is the last line,
    while for retrievals that end, I have FETCH producing time, data in buffer and moving to the next Fetch until all data is retrieved
    On the side note, I have no problems with retrieving data either by SQL Developer or DbVisualizer.
    Problems started when I installed 11.2.0 Client. Even if I want to use 10.0.1 Client, the same problem occurs. So I guess something from 11.2.0 overrides 10.0.1 settings.
    I will appreciate any comments/hints/help.
    Thank you very much.

    pgoel wrote:
    I've been connecting to Oracle 11g Server (not sure exact version) using Oracle 10.1.0 Client and O10 Oracle 10g driver. Everything was ok.Earlier (before installing new stuff) did you ever try retrieving data from big tables (like 240 and more records), if yes, was it working?Yes, with Oracle 10g client (before installing 11g) I was able to retrieve any data, either it was 10k+ records or 100 records. Installing 11g client changed something that even using old 10g client (which I still have installed) fails to work. The same problem occur no matter I'm using 10g or 11g client now. Powerbuilder hangs on retrieving tables with more than like 240 records.
    Thanks.

  • Facing lot of problems with the DATA object  -- Urgent

    Hi,
    I am facing lot of problems with the data object in VC.
    1. I created the RFC initially and then imported the data object in to VC. Later i did some modifications to RFC Function module,and when i reload the data object, I am not able to see the new changes done to RFC in VC.
    2. Even if i delete the function module, after redeploying the IVIew, results are getting displayed.
    3. How stable is the VC?
      I restarted the sql server and portal connection to R3 is also made afresh.... still i am viewing such surprise results..
    please let me know what might be the problem.

    Hi Lior,
    Are u aware of this problem.
    If yes, please let me know...
    Thanks,
    Manjunatha.T.S

  • Problem with a data set: DIAdem crashes

    Hi,
    I've got a problem with a data set. When I want to zoom in DIAdem-View, DIAdem crashes with the following message (translated from German ;-):
    error type: FLOAT INEXACT RESULT or FLOAT INVALID OPERATION or FLOAT STACK CHECK
    error address: 00016CB8
    module name: gfsview.DLL
    I've got some similar data set not showing such problems. Further on I scanned the data a bit, but in the 59000 points I didn't see anything special. I did try to delete "NOVALUE"s as well, but after that there still exist "NOVALUE"s.
    Does anyone have an idea what to look for?
    Thanks,
    Carsten

    Carsten,
    Could you please upload you Citadel database to the following FTP site:
    ftp.ni.com/incoming
    If you want to compress (ZIP) and/or put a password on the data, that's fine. Please send me a private email at [email protected] (with the file name and password if you put one on the file) once you have uploaded the file and I will check it out.
    Otmar
    Otmar D. Foehner
    Business Development Manager
    DIAdem and Test Data Management
    National Instruments
    Austin, TX - USA
    "For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

  • Problem with input data format - not "only" XML

    Hi Experts,
    I have problem with input data format.
    I get some data from JMS ( MQSeries) , but input format is not clear XML. 
    This is some like flat file with content of XMLu2026.
    Example:
    0000084202008-11-0511:37<?xml version="1.0" encoding="UTF-8"?>
    <Document xmlns="urn:xsd:test.01" xmlns:xsi=http://www.w3.org/2001/XMLSchema-instance Sndr="0001" Rcvr="SP">
    ...content....
    </Document>000016750
    Problems in this file is :
    1. data before parser <? xml version="1.0"> -> 0000084202008-11-0511:37 
    2. data after last parser </Document> -> 000016750
    This data destroy XML format.
    Unfortunately XI is not one receiver of this files and we canu2019t change this file format in queue MQSeries ( before go to XI) .
    My goal is to get XML from this file:
    <?xml version="1.0" encoding="UTF-8"?>
    <Document xmlns="urn:xsd:test.01" xmlns:xsi=http://www.w3.org/2001/XMLSchema-instance Sndr="0001" Rcvr="SP">
    ...content....
    </Document>
    My questions:
    1. Is any way or technique to delete this data 0000084202008-11-0511:37  in XI from this file ?
    2. Is any way to get only XML from this file ?
    Thanx .
    Regards,
    Seo

    Hi Buddy
    What is the XI adapter using?
    If you use inbound File adapter content conversion you could replace these values with none and then pass it to the scenario.
    Does that help?
    Regards
    cK

  • Problem with universal data cleanse

    I have problem with universal data cleanse.
    I am using DS 3.2.x (12.2.2).
    I created:
    Dictionary: TEST
    Classification: TEST_CL
    Custom outputs: category: TEST_CAT
    Dictionary Entry:
    Primary: BO
    Classification: TEST_CL
    Gender: Unassigned
    Secondary information:
    When used as: TEST_CAT
    Standard: Business Objects
    Rule file:
    DataCleanse Rule File v2.0;
    TEST_CAT = TEST_CL;
    action = TEST_CAT;
    TEST_CAT = 1 : TEST_CAT : 1;
    end_action
    Data Cleanse:
    Input: Multiline1
    Options:
    Parsing Dictionary: TEST
    Rule file: .../test_rules.dat
    Break On Whitespace Only: Yes
    Parser Sequences Multiline1: TEST_CAT
    Output:
    Parent_component: TEST_CAT1
    Generated_field_name: TEST_CAT and RULE_LABEL
    Generated_field_class: parsed/standardized
    Contenet_type: none
    and EXTRA field
    I wanted to replace word u201CBOu201D with the standard words u201CBusiness Objectu201D, but I have result: there is "BO" in the extra field,
    there are "null" in others fields.
    What am I doing wrong?
    Thanks for all help!
    P.S. I don't have cleansing packages installer.

    There seem to be a couple of things going on here:
    1. If you are using your custom dictionaries, then you have to map your input to MULTILINE1 and enable the custom parsers - just something to be aware of
    2. You mentioned that you made some changes to the existing dictionary and you are not seeing any changes. To be clear, do you have different TEST and PRODUCTION environments? Or is it the same environment except that you have a local DS repository and for the dictionary you are pointing to another repository (using Dictionary --> Manage Connections)?
    Having the dictionaries on a different repository should not make any difference as long as you point to them in your designer using the Dictionary --> Manage Connection option.
    So I think there may be some issue with your job setup and/or dictionary values need to be looked at. You can start by adding another output field named "EXTRA" to see whether or not your data is getting parsed at all. Also, make sure the entry "CLEANME" is classified as FIRM_NAME_ALONE in the dictionary and that you are selecting the correct dictionary name in the Datacleanse Transform options.

  • Spotify and facebook problem with the date

    Hi, everyone.My spotify account have a problem with the date. I changed the date on facebook and nothing happens with that, the spotify account has a wrong date, is not the same as facebook account

    Hi ,
    By default , RFC accept date format of SQL date (yyyy-mm-dd) . If you are using a date picker from WD, it directly set the date in SQL date format. Incase if you are trying to pass date to RFC in some other way you have to convert that into SQL date format before passing.
    if you are passing String date of format dd-mm-yyyy , you try this method to convert that to SQL date and pass to your RFC.
    public java.sql.Date sqlDateConvert( String date)  {
        //@@begin sqlDateConvert()
         java.sql.Date dateObj=null;
         try{     
              StringTokenizer tempStringTokenizer = new StringTokenizer(""+date,"-");          int dd=Integer.parseInt(tempStringTokenizer.nextToken().trim());
                                    int mm=Integer.parseInt(tempStringTokenizer.nextToken().trim());
              mm=mm-1;
              int yyyy=Integer.parseInt(tempStringTokenizer.nextToken().trim());
              Calendar cal =Calendar.getInstance();   
              cal.set(yyyy,mm,dd);                         
              dateObj = new java.sql.Date( cal.getTime().getTime());
         }catch(Exception e)
              return dateObj;
    Hope this will help you.

  • I have problem with Cellular data network it is not apearing in iphone setting so help me how to bring this option in iphone

    i have problem with Cellular data network it is not apearing in iphone setting so help me how to bring this option in iphone

    What brand/model USB drive? Is it bus or AC powered?
    On Mail...
    First Quit Mail, then I'd backup these two Mail folders, by right clicking on them in the Finder, then choose Archive/Compress.
    Users/YourUserName/Library/Mail
    Users/YourUserName/Library/Mail Downloads
    (Could be a different folder here if you chose such in Mail Prefs)
    Right click on that Mail folder, choose archive, you'll get everything in the folder, and the folder itself in a file called Mail.zip, move it to a safe place, same for the Mail Downloads folder... only the plist is separate.
    /Users/YourUserName/Library/Preferences/com.apple.mail.plist

Maybe you are looking for

  • I want to downgrade my software from OS X 10.8.2 to the Original OS X Lion Server

    Hi I have a Mac mini Server with 10.8.2 and its driving me insane since the update (dont ask why I did it) its also lost all the server side of things, is there a way of putting the OS X Lion Server back on without deleting files etc I hope you can h

  • PDF editing from in-app possible? urgent please

    Is there a plugin that allows one to open an PDf from within an app and edit it in a pdf editor. My client is a publusher of digital textbooks for high school and one requirement is to be able to open exercises, which are currently in PDf format, and

  • How to get 6 months free Xbox Music on Encore 8

    I've just got my tablet and I'm pretty impressed so far. The only query I have isn't really a support issue as such but it says it comes with 6 months free Xbox Music, there's nothing in the box to redeem. There's no mention of it in the Toshiba Plac

  • Central Contract, MDM Catalog, and classic scenario

    Dear SAP experts, We are in SRM 7.01 with backend ECC 6.05 deploying classic scenario. We are using Central Contract Management in which we negotiate contract in SRM and later distribute it to ECC. We also plan to use SRM-MDM Catalog. We notice that

  • Menubar component and xml issue

    Hi folks, I am using the menuBar component that ships with mx2004pro, to choose galleries in an xml gallery. The gallery selector code is this: It's the second to last line, bassmenu.childNodes.onRelease = function, that I am having trouble with. bas