OraOLEDB.Oracle on x64 Win 2003 connect to Oracle 9.2 from SQL 2005 x64
I know this is an Oracle board but some of you may also support SQL Server like I do and I am hoping someone has had the pleasure of using OraOLEDB.Oracle on 64 bit.
I have a 64 bit SQL Server 2005 SP2 on a Windows 2003 x64. The developer said that he needed to use OLE to talk to Oracle so I went to Oracle and downloaded the 64 bit OraOLDDB driver as recommended in a MS note.
I can connect to Oracle via tnsping and using SQLPlus but I cannot create a linked db successfully.
The linked database errors off with >> Cannot initialize data source for OLE provider "OraOLEDB.Oracle" for Lined Server "X" (Microsoft SQL Server error: 7399) << (manually typed)
Here is the official OS, SQL Server, and Oracle client information:
The OS is Windows Server 2003 Standard x64 edition Service Pack 2 (NT 5.2 build 3790)
The SQL Server 2005 9.0.3042 (x64) [from
Microsoft SQL Server Management Studio 9.00.3042.00
Microsoft Analysis Services Client Tools 2005.090.3042.00
Microsoft Data Access Components (MDAC) 2000.086.3959.00
(srv03_sp2_rtm.070216-1710)
Microsoft MSXML 2.6 3.0 6.0
Microsoft Internet Explorer 6.0.3790.3959
Microsoft .NET Framework 2.0.50727.42
Operating System 5.2.3790
The OraOLEDB.Oracle driver shows that it is version 10.2.0.3
Oracle "tnsping sid " works
SQLPlus (ver 9.2) works
I have serveral linked databases to Oracle that I have built but all of them are 1- on SQL Server 2000 and 2- are 32 bit. If anyone knows of any additional patches (Windows or Oracle) necessary to resolve this I would appreciate the information. Also there are potential firewall issues though the fact that SQLPus can be used seems to rule this out, but if there are any ports associated with OLE I would like to check on them specifically.
-- Mark D Powell --
Thank you for reminding me what I already knew but in my haste to post out a reply I had forgotten to consider looking at the provider properties.
Today I did and the linked database still failed. The though occurred to me a little later to delete and recreate the linked db and bingo I had a working linked database to Oracle. Now I have three of them and the developer should be working with them now.
This is the first time I ever had to change a provider property to get the provider to work. I would have thought that when the Oracle client install process registered the OLE provider with SQL Server 2005 it would be set with the proper defaults to work.
Thanks again to everyone
-- Mark D Powell --
Similar Messages
-
Install 16 bit Oracle client on Win 2003 server
Hello,
Is it possible to install Oracle SQL* Net 2.3(16 bit) Client on Windows 2003 server. If it is then could someone give me links from where I could get more information on this (like the steps to install 16 bit Oracle client on Win 2003).
Thanks.the 16-bit applications are not supported by Windows 2003 server x64 edition.
http://support.microsoft.com/?kbid=896458&SD=tech
I have never tried to use 16-bit SQLNet client on Windows 2003 x86. I'm pretty sure that this combination will not be supported by Oracle , athough it could work.
As far as I remember the 2.3 client was shipped with the Oracle 7.3.
here is the desupport notice for Oracle 7
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=66409.1
Mike -
Recently We've migrated SQL 2005 x86 Enterprise running on Windows 2003 Enterprise to new hardware where is running Windows 2008 SP2 and SQL 2005 x64 SP4 with CU3. We migrate users (with standard approach by Microsoft) and application databases
to new server. Everything is looking ok, applications working. But we've got some SQL exceptions like below.
Is there any known bug related to that? Could someone help us.
Memory
MemoryLoad = 15%
Total Physical = 32733 MB
Available Physical = 27752 MB
Total Page File = 64782 MB
Available Page File = 60344 MB
Total Virtual = 8388607 MB
Available Virtual = 8355366 MB
**Dump thread - spid = 84, PSS = 0x00000000D1A43ED0, EC = 0x00000000D1A43EE0
***Stack Dump being sent to D:\MSSQL.1\MSSQL\LOG\SQLDump0005.txt
* BEGIN STACK DUMP:
* 04/25/14 12:54:30 spid 84
* ex_handle_except encountered exception C0000264 - Server terminating
* Input Buffer 255 bytes -
There is also some output from debugger:
0:000> .ecxr
rax=0000000077207080 rbx=0000000000000000 rcx=0000000016a37d50
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000440
rip=00000000772070bd rsp=0000000016a38240 rbp=000000000000003f
r8=0000000000000000 r9=0000000000000000 r10=0000000000000000
r11=0000000000000287 r12=00000000032fdab0 r13=0000000000000000
r14=00000000000019e4 r15=0000000049b8d00c
iopl=0 nv up ei pl nz na po nc
cs=0033 ss=002b ds=002b es=002b fs=0053 gs=002b efl=00000206
kernel32!RaiseException+0x3d:
00000000`772070bd 4881c4c8000000 add rsp,0C8h
0:000> kC 1000
Call Site
kernel32!RaiseException
sqlservr!DmpGetClientExport
sqlservr!_____SQL______Process______Available
sqlservr!_____SQL______Process______Available
sqlservr!_____SQL______Process______Available
sqlservr!SQLExit
kernel32!UnhandledExceptionFilter
ntdll!RtlpNotOwnerCriticalSection
ntdll!_C_specific_handler
ntdll!RtlIntegerToChar
ntdll!_C_specific_handler
ntdll!RtlRaiseStatus
ntdll!RtlpNotOwnerCriticalSection
ntdll!LdrGetProcedureAddress
sqlshield
sqlservr
0x0
0x0
0x0
0x0
0x0
Hi,
In last days we "close" our SQL to some scanning security applications which could also do some things on our SQL. But it's only a guess. About sqlshield we do the unregister and register DLL's again. Now at last two exception is not the same situation.
Can you see something from there with "Non-yielding Scheduler". Is it also possible that it something wrong with the hardware. We're using new Cisco rack 1U server for that SQL server. I've also read someting about upgrading the BIOS, related to errors
"Non-yielding Scheduler". At the end i can also tell, that the server is alive for a couple of days, if there is no a lot activity on the server, i mean on national holidays, through weekend, etc.
Any new idea?
Thanks,
Matjaž
=====================================================================
BugCheck Dump
=====================================================================
This file is generated by Microsoft SQL Server
version 9.00.5266.00
upon detection of fatal unexpected error. Please return this file,
the query or program that produced the bugcheck, the database and
the error log, and any other pertinent information with a Service Request.
Computer type is AT/AT COMPATIBLE.
Bios Version is Cisco0 - 0
BIOS Date: 08/20/13 06:01:31 Ver: 04.06.05
Current time is 11:17:16 04/30/14.
12 Unknown CPU 9., 14 Mhz processor (s).
Windows NT 6.0 Build 6002 CSD Service Pack 2.
Memory
MemoryLoad = 17%
Total Physical = 32733 MB
Available Physical = 26900 MB
Total Page File = 64782 MB
Available Page File = 59543 MB
Total Virtual = 8388607 MB
Available Virtual = 8355342 MB
***Unable to get thread context - no pss
* BEGIN STACK DUMP:
* 04/30/14 11:17:16 spid 0
* Non-yielding Scheduler
Stack Signature for the dump is 0x00000000000003AD -
SQL 2005 x64 poor performance after migration from SQL 2005 x86
Recently We've migrated SQL 2005 x86 SP1 Enterprise running on Windows 2003 Enterprise to new hardware where is running Windows 2008 SP2 and SQL 2005 x64 SP4 with CU3.
In the work day, there are sometime SQL excpetions like this below. On other hand i can also tell that we already found some queries which has some inner joins and where clauses on nvarchar fileds, because of the nature of application. Such a query
is running for about 11 seconds on old SQL server, and about 6 minutes on new SQL server. My main question if is this possible just with a change to new architecture of SQL and more last patches and updates for SQL 2005. Is there any way how to get
this queries running faster, without rewritng them with new ones? Is this also possible this could be also cause for SQL exceptions, which we are facing on SQL server?
About new hardware, for now we can't find it something wrong. There is basic configuration:
Cisco UCS C220 M3S (1U server)
32GB RAM
Intel(R)Xeon® CPU [email protected], 6 core
Disk system: 4xSAS 300GB in RAID5 (OS and DATA) and 2xSATA 1TB in RAID1 (SQL backup)
RAID controller: LSI MegaRAID SAS 9271-8i (with latest driver and firmware)
Part of log of dump file:
2014-05-09 08:30:07.08 spid86 Error: 17311, Severity: 16, State: 1.
2014-05-09 08:30:07.08 spid86 SQL Server is terminating because of fatal exception c0000264. This error may be caused by an unhandled Win32 or C++ exception, or by an access violation encountered during exception handling.
Check the SQL error log for any related stack dumps or messages. This exception forces SQL Server to shutdown. To recover from this error, restart the server (unless SQLAgent is configured to auto restart).
2014-05-09 08:30:07.08 spid86 Using 'dbghelp.dll' version '4.0.5'
2014-05-09 08:30:07.08 spid86 **Dump thread - spid = 86, PSS = 0x0000000132A67ED0, EC = 0x0000000132A67EE0
2014-05-09 08:30:07.08 spid86 ***Stack Dump being sent to D:\MSSQL.1\MSSQL\LOG\SQLDump0087.txt
2014-05-09 08:30:07.08 spid86 * *******************************************************************************
2014-05-09 08:30:07.08 spid86 *
Thanks for any help,
Matjaž>Is there any way how to get this queries running faster, without rewriting them with new ones?
You need to perform basic performance tuning steps in the new environment.
Software optimization:
http://www.sqlusa.com/articles/query-optimization/
Disk optimization:
http://www.sqlusa.com/bestpractices/configureharddisk/
Memory optimization:
http://www.sqlusa.com/bestpractices/memory-configuration/
REBUILD INDEXES, eliminate missing indexes & UPDATE STATISTICS.
If there is still a problem, look in Activity Monitor for expensive queries. Optimize them. As a general rule, you don't want to have expensive queries in RDBMS.
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012 -
Hi Friends,
I hope somebody can help.
I have an Ides Ecc6(java+adap) installation on Oracle 10..*.os win 2003 32 bit
Then I try to start the System in mmc the dispatcher is stopping (first yeloow then grey) and no error messages
when is see sys log in SAP MMC
erro: SAP-Basis System: Initialization DB-Connect Failed, Return Code 000256
when i try R3trans-d
Log:
C:\Documents and Settings\accadm>r3trans -d
This is r3trans version 6.14 (release 700 - 15.06.07 - 15:50:00)
unicode enabled version
2EETW000 sap_dext called with msgnr "2":
2EETW000 -
db call info -
2EETW000 function: db_ntab
2EETW000 fcode: NT_RDTDESCR
2EETW000 tabname: TADIR
2EETW000 len (char): 5
2EETW000 key: TADIR
2EETW000 retcode: 2
r3trans finished (0012)
Dev_wo.lo file
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Thu Apr 16 14:07:43 2009
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\ACC\DVEBMGS00\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\ACC\DVEBMGS00\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\ACC\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.107)
B New connection 0 created
M sysno 00
M sid ACC
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 111
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 3724
M
M kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3724) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Thu Apr 16 14:07:44 2009
M DpShMCreate: sizeof(wp_adm) 18672 (1436)
M DpShMCreate: sizeof(tm_adm) 4232256 (21056)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1536)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 06810040, size: 4892312)
M DpShMCreate: allocated sys_adm at 06810040
M DpShMCreate: allocated wp_adm at 06812090
M DpShMCreate: allocated tm_adm_list at 06816980
M DpShMCreate: allocated tm_adm at 068169B0
M DpShMCreate: allocated wp_ca_adm at 06C1FDF0
M DpShMCreate: allocated appc_ca_adm at 06C25BB0
M DpShMCreate: allocated comm_adm at 06C27AF0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06CA89B0
M DpShMCreate: allocated gw_adm at 06CA89F0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 06CA8A20
M DpShMCreate: allocated wall_adm at 06CA8A28
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host oiam
M
M Thu Apr 16 14:07:46 2009
M calling db_connect ...
C Prepending D:\usr\sap\ACC\DVEBMGS00\exe to Path.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@ACC on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 06DF1478 06DF6A14 06DF629C
C Attaching to DB Server ACC (con_hdl=0,svchp=06DF61E8,srvhp=06E07DD4)
C Starting user session (con_hdl=0,svchp=06DF61E8,srvhp=06E07DD4,usrhp=06E53768)
C Now '/@ACC' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=06DF61E8,usrhp=06E53768)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@ACC on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 06DF1478 06DF6A14 06DF629C
C Starting user session (con_hdl=0,svchp=06DF61E8,srvhp=06E07DD4,usrhp=06E53768)
C Now 'SAPSR3/<pwd>@ACC' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance ACC is running on OIAM with ORACLE version 10.2.0.1.0 since APR 16, 2009, 14:07:26
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20090416 140746 OIAM
C OCI-call failed with -1=OCI_ERROR
C SQL error 376: 'ORA-00376: file 25 cannot be read at this time
C ORA-01110: data file 25: 'D:\ORACLE\ACC\SAPDATA1\SR3_22\SR3.DATA22''
C *** ERROR => Error 376 in stmt_fetch() from oci_execute_stmt(), orpc=0
[dbsloci.c 12714]
C *** ERROR => ORA-376 occurred when executing SQL stmt (parse error offset=0)
[dbsloci.c 12733]
C sc_p=06D44E98,no=0,idc_p=00000000,con=0,act=1,slen=26,smax=256,#vars=0,stmt=06E1C138,table=SVERS
C SELECT VERSION FROM SVERS ;
C sc_p=06D44E98,no=0,idc_p=00000000,con=0,act=1,slen=26,smax=256,#vars=0,stmt=06E1C138,table=SVERS
C prep=0,lit=0,nsql=0,lobret=0,#exec=1,dbcnt=0,upsh_p=00000000,ocistmth_p=06E0FC68
C IN : cols=0,rmax=1,xcnt=0,rpc=0,rowi=0,rtot=0,upto=-1,rsize=0,vmax=0,bound=0,iobuf_p=00000000,vda_p=00000000
C lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C OUT: cols=1,rmax=1,xcnt=1,rpc=0,rowi=0,rtot=0,upto=-1,rsize=144,vmax=32,bound=1,iobuf_p=003F2DC8,vda_p=06E1C3A8
C lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C SELECT VERSION FROM SVERS ;
B ***LOG BZA=> table SVERS does not exist on database [dblink#3 @ 1299] [dblink 1299 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10283]
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M req.vm = no VM
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server oiam_ACC_00 on host oiam (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Apr 16 14:07:46 2009
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10486
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3724) [dpnttool.c 327]
thanks for support
keshavaHi Rohit
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid ACC
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 111
intno 20050900
make: multithreaded, Unicode, optimized
pid 3452
Fri Apr 17 14:17:27 2009
kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3452) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 111 successfully loaded
shared lib "dw_xtc.dll" version 111 successfully loaded
shared lib "dw_stl.dll" version 111 successfully loaded
shared lib "dw_gui.dll" version 111 successfully loaded
shared lib "dw_mdm.dll" version 111 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri Apr 17 14:17:32 2009
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0225.qqq.nxst) took 5 seconds
Fri Apr 17 14:17:36 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >oiam_ACC_00 <
DpShMCreate: sizeof(wp_adm) 18672 (1436)
DpShMCreate: sizeof(tm_adm) 4232256 (21056)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1536)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06810040, size: 4892312)
DpShMCreate: allocated sys_adm at 06810040
DpShMCreate: allocated wp_adm at 06812090
DpShMCreate: allocated tm_adm_list at 06816980
DpShMCreate: allocated tm_adm at 068169B0
DpShMCreate: allocated wp_ca_adm at 06C1FDF0
DpShMCreate: allocated appc_ca_adm at 06C25BB0
DpShMCreate: allocated comm_adm at 06C27AF0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06CA89B0
DpShMCreate: allocated gw_adm at 06CA89F0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 06CA8A20
DpShMCreate: allocated wall_adm at 06CA8A28
MBUF state OFF
DpCommInitTable: init table for 500 entries
Fri Apr 17 14:17:37 2009
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 3652
argv[0] = D:\usr\sap\ACC\DVEBMGS00\exe\jcontrol.EXE
argv[1] = D:\usr\sap\ACC\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\ACC\SYS\profile\ACC_DVEBMGS00_oiam
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1045
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=ACC
argv[7] = -DSAPMYNAME=oiam_ACC_00
argv[8] = -DSAPPROFILE=D:\usr\sap\ACC\SYS\profile\ACC_DVEBMGS00_oiam
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1629]
***LOG Q0K=> DpMsAttach, mscon ( oiam) [dpxxdisp.c 11753]
DpStartStopMsg: send start message (myname is >oiam_ACC_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 111
Release check o.K.
Fri Apr 17 14:17:38 2009
DpJ2eeLogin: j2ee state = CONNECTED
Fri Apr 17 14:18:25 2009
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Fri Apr 17 14:19:53 2009
J2EE server info
start = TRUE
state = ACTIVE
pid = 3652
http = 50000
https = 50001
load balance = 1
start_lazy = 0
start_control = SAP J2EE startup framework -
Oracle Database on win 2003 server 64bits
HI all
which file in oracle download's page I can take for This operation system?
Oracle Database 10g Release 2 (10.2.0.1.0) for Microsoft Windows (x64)
or
Oracle Database 10g Release 2 (10.2.0.4) for Microsoft Windows Vista x64 and Microsoft Windows Server 2008 x64 ?
No have specific choice for 2003.
Regards
PaulOracle 10.2.0.4 is much more stable and less problematic than 10.2.0.1. I would strongly suggest not using 10.2.0.1.
If those were your only choices, I would chose 10.2.0.4 (assuming it is a certified combination with the OS software (win server 2008) and/or Vista. I didn't think it was a certified combination, (but I have not checked).
Only run certified combinations. -
Where from I unload the intalador of oracle 9i for win 2003 R2 64 bits
Hi,
They know the link in OTN to unload the Oracle 9i for Win 64 bits.
Thank you for the given help.
Andres.According to Oracle Certify, only the 32bit version of Oracle9i is available for Windows 64bit OS.
-
MS SQL 2005 x64 Linked Server to Oracle 10g 32bit
I need to connect to a 10.2.0.4 Oracle DB from a SQL Server 2005 x64 on W2003.
The Instant Client installed is 10.2.0.1 with ODP 10.2.0.3, which is used to connect to another Oracle DB.
I get de error ORA-12154 while doing the linked server query.
Do I really need to update de Instant Client?
Thankx and some more info.
I can reach it with TOAD from my laptop which has Instant Client 11.1.0.7.
I followed several how-tos while configuring the linked server.
The other linked server supposely works but I'm not sure and don't know the Oracle version.Hi sanjay,
but why sysdate is giving me the today's date and when i use getdate ...it does not give me anything..
i am using openquery tooracle data base..usually i have to use Oracle command..
Mo.. -
Can Oracle 8.0.6 reports connects to Oracle 11g Database
Hi,
I know Oracle 8.0.6 report is already out of support. I want to build some environement. In this context, I want to know, where Oracle Reports 8.0.6 can connect to Oracle 11g R2 database ?
Pl suggest me urgently.
thanks & regards
paragFirst of all: using the word 'urgently' is inappropriate and rude in a forum of volunteers.
Edit your post and apologize publicly for using it.
Secondly your question is a rhetorical one, as it's answer is:
OF COURSE NOT
8.0.6
was succeeded by
8.1.5
8.1.6
8.1.7
9.0.1
9.2.0
10.1.0
10.2.0
11.0.1
11.0.2
NINE releases in between!!!
Sybrand Bakker
Senior Oracle DBA -
Oracle 6i Forms can't connect to Oracle XE Database(Linux)
What is the problem, I can't connect my Oracle 6i Forms to Oracle XE Database that installed on Linux(Fedora Core 4/Ubuntu 6.06), but no problem when I try to connect to Oracle XE Database that installed on Windows.
Thanks,See this thread, seem me interesting
Re: Trouble to start Oracle XE listener
on forms 10g it's work:
using Database XE and Forms 10g
and see too:
http://www.oracle.com/technology/software/products/database/xe/htdocs/102xelinsoft.html
http://www.oracle.com/technology/software/products/database/xe/files/install.102/b25144/toc.htm
http://www.oracle.com/technology/tech/linux/install/xe-on-kubuntu.html
Regards -
I am an oracle newbie, I should sqlplus connection to oracle
I want to do: Open the oracle, create a Test database.
System: redhat 6.2 / / Oracle version: 11g r2
Here is my oracle log file, please help me, thank.
=============================================
Sun Oct 14 00:18:53 2012
Create Relation ADR_CONTROL
Create Relation ADR_INVALIDATION
Create Relation INC_METER_IMPT_DEF
Create Relation INC_METER_PK_IMPTS
Log messages written to /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
Trace information written to /u01/app/oracle/diag/tnslsnr/localhost/listener/trace/ora_2185_3078911680.trc
Trace level is currently 0
Started with pid=2185
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
WARNING: Subscription for node down event still pending
14-OCT-2012 00:18:53 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=localhost.localdomain)(USER=oracle))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=186646784)) * status * 0
Sun Oct 14 00:21:59 2012
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521)))
Listener completed notification to CRS on stop
14-OCT-2012 00:21:59 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=localhost.localdomain)(USER=oracle))(COMMAND=stop)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=186646784)) * stop * 0
Thu Nov 01 23:04:51 2012
Log messages written to /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
Trace information written to /u01/app/oracle/diag/tnslsnr/localhost/listener/trace/ora_3372_3079083712.trc
Trace level is currently 0
Started with pid=3372
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
WARNING: Subscription for node down event still pending
01-NOV-2012 23:04:55 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=localhost.localdomain)(USER=oracle))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=186646784)) * status * 0
Thu Nov 01 23:05:08 2012
WARNING: Subscription for node down event still pending
01-NOV-2012 23:05:08 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=localhost.localdomain)(USER=oracle))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=186646784)) * status * 0
Thu Nov 01 23:08:14 2012
WARNING: Subscription for node down event still pending
01-NOV-2012 23:08:14 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=localhost.localdomain)(USER=oracle))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=186646784)) * status * 0
Thu Nov 01 23:10:51 2012
Trace information written to /u01/app/oracle/diag/tnslsnr/localhost/listener/trace/ora_3372_3079083712.trc
Trace level is currently 0
Log messages written to /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
01-NOV-2012 23:10:51 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=localhost.localdomain)(USER=oracle))(COMMAND=reload)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=186646784)) * reload * 0
Thu Nov 01 23:11:27 2012
01-NOV-2012 23:11:27 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=localhost.localdomain)(USER=oracle))(COMMAND=services)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=186646784)) * services * 0
Thu Nov 01 23:33:14 2012
WARNING: Subscription for node down event still pending
01-NOV-2012 23:33:14 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=localhost.localdomain)(USER=oracle))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=186646784)) * status * 0
Thu Nov 01 23:45:33 2012
01-NOV-2012 23:45:33 * (CONNECT_DATA=(SERVICE_NAME=)(CID=(PROGRAM=sqlplus)(HOST=localhost.localdomain)(USER=oracle))) * establish * 12504
TNS-12504: TNS:listener was not given the SERVICE_NAME in CONNECT_DATA
TNS-12504: TNS:listener was not given the SERVICE_NAME in CONNECT_DATA
Thu Nov 01 23:52:12 2012
01-NOV-2012 23:52:12 * (CONNECT_DATA=(SERVICE_NAME=oracle)(CID=(PROGRAM=java)(HOST=localhost.localdomain)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=14409)) * establish * oracle * 12514
TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
Thu Nov 01 23:55:32 2012
WARNING: Subscription for node down event still pending
01-NOV-2012 23:55:32 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=localhost.localdomain)(USER=oracle))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=186646784)) * status * 0
Thu Nov 01 23:56:01 2012
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521)))
Listener completed notification to CRS on stop
01-NOV-2012 23:56:01 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=localhost.localdomain)(USER=oracle))(COMMAND=stop)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=186646784)) * stop * 0
Tue Nov 06 22:24:37 2012
Log messages written to /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
Trace information written to /u01/app/oracle/diag/tnslsnr/localhost/listener/trace/ora_2674_3077985984.trc
Trace level is currently 0
Started with pid=2674
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
WARNING: Subscription for node down event still pending
06-NOV-2012 22:24:42 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=localhost.localdomain)(USER=oracle))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=186646784)) * status * 0
Tue Nov 06 22:26:40 2012
WARNING: Subscription for node down event still pending
06-NOV-2012 22:26:40 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=localhost.localdomain)(USER=oracle))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=186646784)) * status * 0
Tue Nov 06 22:49:34 2012
WARNING: Subscription for node down event still pending
06-NOV-2012 22:49:34 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=localhost.localdomain)(USER=oracle))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=186646784)) * status * 0
Tue Nov 06 23:02:20 2012
WARNING: Subscription for node down event still pending
06-NOV-2012 23:02:20 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=localhost.localdomain)(USER=oracle))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=186646784)) * status * 0
Tue Nov 06 23:07:20 2012
06-NOV-2012 23:07:20 * (CONNECT_DATA=(SERVICE_NAME=)(CID=(PROGRAM=sqlplus)(HOST=localhost.localdomain)(USER=oracle))) * establish * 12504
TNS-12504: TNS:listener was not given the SERVICE_NAME in CONNECT_DATA
TNS-12504: TNS:listener was not given the SERVICE_NAME in CONNECT_DATA
Tue Nov 06 23:08:44 2012
06-NOV-2012 23:08:44 * (CONNECT_DATA=(SERVICE_NAME=)(CID=(PROGRAM=sqlplus)(HOST=localhost.localdomain)(USER=oracle))) * establish * 12504
TNS-12504: TNS:listener was not given the SERVICE_NAME in CONNECT_DATA
TNS-12504: TNS:listener was not given the SERVICE_NAME in CONNECT_DATA
Tue Nov 06 23:09:23 2012
06-NOV-2012 23:09:23 * (CONNECT_DATA=(SERVICE_NAME=oracle)(CID=(PROGRAM=sqlplus)(HOST=localhost.localdomain)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=22109)) * establish * oracle * 12514
TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
Tue Nov 06 23:10:20 2012
WARNING: Subscription for node down event still pending
06-NOV-2012 23:10:20 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=localhost.localdomain)(USER=oracle))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=186646784)) * status * 0
Tue Nov 06 23:47:51 2012
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521)))
Listener completed notification to CRS on stop
06-NOV-2012 23:47:51 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=localhost.localdomain)(USER=oracle))(COMMAND=stop)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=186646784)) * stop * 0// id
uid=501(oracle) gid=501(oinstall) groups=501(oinstall),502(dba) context=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023
// env | sort
CLASSPATH=.:/usr/java/jdk1.7.0_07/lib/dt.jar:/usr/java/jdk1.7.0_07/lib/tools.jar
COLORTERM=gnome-terminal
CVS_RSH=ssh
DBUS_SESSION_BUS_ADDRESS=unix:abstract=/tmp/dbus-iLGRF7K4YE,guid=2fd6a1fbe541bd143dfc8b5e00000053
DESKTOP_SESSION=gnome
DISPLAY=:0.0
G_BROKEN_FILENAMES=1
GDM_KEYBOARD_LAYOUT=us
GDM_LANG=en_US.UTF-8
GDMSESSION=gnome
GNOME_DESKTOP_SESSION_ID=this-is-deprecated
GNOME_KEYRING_PID=2467
GNOME_KEYRING_SOCKET=/tmp/keyring-PckI8t/socket
GTK_RC_FILES=/etc/gtk/gtkrc:/home/oracle/.gtkrc-1.2-gnome2
HISTCONTROL=ignoredups
HISTSIZE=1000
HOME=/home/oracle
HOSTNAME=localhost.localdomain
JAVA_HOME=/usr/java/jdk1.7.0_07
LANG=en_US.UTF-8
LESSOPEN=|/usr/bin/lesspipe.sh %s
LOGNAME=oracle
MAIL=/var/spool/mail/oracle
ORACLE_BASE=/u01/app/oracle
ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1
ORACLE_SID=ora
ORBIT_SOCKETDIR=/tmp/orbit-oracle
PATH=/u01/app/oracle/product/11.2.0/db_1/bin:/u01/app/oracle/product/11.2.0/db_1/bin:/usr/java/jdk1.7.0_07/binL:/usr/lib/qt-3.3/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/oracle/bin
PWD=/home/oracle/Desktop
QTDIR=/usr/lib/qt-3.3
QTINC=/usr/lib/qt-3.3/include
QTLIB=/usr/lib/qt-3.3/lib
SESSION_MANAGER=local/unix:@/tmp/.ICE-unix/2476,unix/unix:/tmp/.ICE-unix/2476
SHELL=/bin/bash
SHLVL=2
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
SSH_AUTH_SOCK=/tmp/keyring-PckI8t/socket.ssh
TERM=xterm
USERNAME=oracle
USER=oracle
_=/usr/bin/env
WINDOWID=44043786
WINDOWPATH=1
$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Thu Nov 8 23:39:48 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> connect ora
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
Warning: You are no longer connected to ORACLE.
SQL> connect oracle
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
SQL> SHOW DATABASES;
SP2-0158: unknown SHOW option "DATABASES"
SQL> SHOW TABLES;
SP2-0158: unknown SHOW option "TABLES"
SQL> SELECT * FROM USER;
SP2-0640: Not connected
SQL> exit
Edited by: ruid on Nov 8, 2012 7:56 AM -
How to connect to SP2010 content database from SQL Management Studio?
I would like to migrate the SP 2010 Foundation content to 2013 Foundation.
Both default installations with no external SQL server.
When trying to connect from SQL Management Studio Express 2008 I get the error below.
I'm using windows authentication and my domain admin account.
tried all the steps from
this guide.
What am I doing wrong here?
Cannot connect to (local).
ADDITIONAL INFORMATION:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.) (Microsoft SQL Server, Error: 10061)Hi,
According to your description, my understanding is that you could not connect from SQL Management Studio Express 2008.
Please try to connect to <MACHINENAME>\SQLEXPRESS or .\SQLEXPRESS instead of (local).
A similar post for your reference:
http://nali.org/post/96133108434/sql-server-a-network-related-or-instance-specific-error
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support -
Is there a oracle 9i for win 2003
is there any oracle to be installed on windows 2003.
the site is not very clear.Which Windows 2003 (x86 or Itanium or AMD64/EM64T)?
Check metalink. -
Connection error when logining in from sql command line
I'm getting the following errors when I attempt to connect using the sql command line. I have installed 10g Express on XP home addition. The errors are as follows:
ORA-01034 Oracle not available
ORA-27101 Shared memory realm does not exist.
ThanksI am getting this error in the oradim log file:
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file 'D:\oraclexe\app\oracle\product\10.2.0\server\dbs/spfileXE.ora'
checked this directory and it is empty
should I uninstall and reinstall. Can I get this file somewhere? -
Can't connect to VS Express 2012 from SQL Express 2012
I have recently installed VS Express 2012 and SQL Server Express 2012.
I can open the Management Tools in SQL and view my data - and see my databases are all there, with their data..
From within VS Express, when I use the wizard to create a new datasource - it never finds the SQL server...
Is there something I need to do to enable the connection between VS and SQL?
Thanks,
AmberHello ,
I would be curious to know the "short" name of your SQL Server Express you have installed.
As I suppose that you have installed all the available features of your SQL Server , you have 3 ways to know this "short" name ( it is important as it is possible that you have installed a no-named instance , that's to say with an empty "short" name
1) find your SQL Server Configuration Manager and open it. It will open on a screen like this
select and click the 1st item in the left panel ( SQL Server Services ) . In the right panel , you should see at the 1st line the name of your SQL Server instance. In my case , the "short" name of my instance is SQLEXPRESS. So the name you have to give
for your datasource is
yourComputerName\ShortInstanceName
yourComputerName is the name of your laptop
ShortInstanceName is the short name of your SQL Server instance ( you will find it surrounded by brackets ).If you have done a default install , it should be SQLEXPRESS like for me.
Check that the service is running ( like in my screenshot ). If not , right-click on the line corresponding to the SQL Server service and click on Start.
2nd solution : you can use VS ( I have a VS 2012 Express for Windows DeskTop ).Click on Add a connection .A new form ( labeled Add a connection ) will appear. Click on the Refresh button , at the right of a listbox labeled Server Name ( the listbox
with the names of the available SQL Server instances is not populated automatically and sometimes you will need to click twice on the Refresh button to see all SQL Server instances ). Select the full name of your SQL Server instance..As it is the 1st time
that you are creating a database , you should be able to see only the system databases ( Master , msdb , tempdb , model).
3rd solution : to use SSMS , it is the best solution to create a new database. When you open SSMS , you have immediately the connection form on the screen. Choose the last item labeled " of the combobox labeled Browse for more and you will select the
name of your SQL Server instance.
Have a nice day
Mark Post as helpful if it provides any help.Otherwise,leave it as it is.
Maybe you are looking for
-
Why can't I post a new topic in the Leopard discussions.
The option is available in other Apple discussions, but for some reason it's not an option for me in the Leopard area. I just want to ask a simple question about why Firefox is now launching every time I restart my computer, but don't want to do so i
-
Configuring APEX in oracle 11.1.0.7.0: apex admin screen is blank
I am trying to configure apex in a oracle 11g (11.1.0.7.0) and after running the apxconf script and unlocking the anonymous account, I get blank screen for http://hostname:8080/apex/apex_admin same behavior for http://hostname:8080/apex Any ideas on
-
Automate Metadata loads into EPMA
Hi, My company has 2 systems HCM and EPMA. We are tying to get the data in sync between these 2 systems. I am new to EPMA and was wondering if there is a way to automate the Metadata loads into EPMA? We recently installed ODI but not sure if this can
-
Input / output error message in Quicktime 6.0.2
I recently installed Mac OS X [10.2 Jaguar version ] on my old G3 266mhz computer ... After installing the new operating system I was really excited about it and foud that it was quite stable and worked well ... I tested the applications and found th
-
Anyone know why images I am importing into Motion from Photoshop would be blurry? I am importing them at 100% so not sure what the issue is, or will they look fine on a Plasma?