Order of applications
Let me suppose that I am opening three 'Finder' and one 'Safari' on my MAC PC and these applications are in the following order on the screen:
Finder1, Finder2, Safari, Finder3
In this situation, if I delete Finder3, which is in front on the screen, I will have the following order.
Finder1, Safari, Finder2
But I prefer to have the following order:
Finder1, Finder2, Safari
Is it possible to have the order on MAC?
Thank you very much for your help.
It might be worth mentioning which 3rd party tool you were using. Not knowing what it does makes it difficult to suggest an alternative.
However, reordering applications and task sequences can be done without any 3rd party tools.
Depending on how you're installing the applications, you can do one of the following:
If you're installing the applications via the generic "Install multiple applications" task, then the order of the applications is specified in the CustomSettings.ini. Just re-number the Applications00x lines.
If you're installing applications individually via the "Install a single application" task, then you can simply use the Up and Down buttons at the top of the Task Sequence page to reorder them.
I'm not sure exactly what you mean by reordering task sequences, maybe you mean reordering sections within the CustomSettings.ini file which then call the appropriate TaskSequenceID?
If so, the value "Priority", which is under the [Settings] section, will define the priority of the sections to process. You can simply edit this line and rearrange the priorities. Separate them with commas
Similar Messages
-
Oracle Fusion Order Demo Application
Hi,
I downloaded this DEMO :
Oracle Fusion Order Demo Application
http://www.oracle.com/technetwork/developer-tools/jdev/index-095536.html
And when in step
9.In the application navigator, under the Resources node, Right click build.xml and choose Run Ant Target > buildAll
I receive this error :
Buildfile: E:\Jdev_sources\Infrastructure\Ant\build.xml
init:
[mkdir] Created dir: E:\Jdev_sources\Infrastructure\Ant\classes
[javac] Compiling 1 source file to E:\Jdev_sources\Infrastructure\Ant\classes
setProperties:
createDatabase:
refreshSchema:
BUILD FAILED
E:\Jdev_sources\Infrastructure\Ant\build.xml:51: The following error occurred while executing this line:
E:\Jdev_sources\Infrastructure\DBSchema\build.xml:100: The following error occurred while executing this line:
E:\Jdev_sources\Infrastructure\DBSchema\build.xml:63: The following error occurred while executing this line:
E:\Jdev_sources\Infrastructure\DBSchema\build.xml:28: E:\Jdev_sources\Infrastructure\Ant\wlserver_10.3\server\lib not found.
Total time: 14 secondsEffectiveley E:\Jdev_sources\Infrastructure\Ant\wlserver_10.3\server\lib does not existe but it should be (seems to me) a part of whet was downloaded.
Thank for help.Hi again, and thanks to all.
I reinstalled all and Now I have the followings that seems to be a connectivity problem :
First the parameteres in build.properties :
jdeveloper.home=E:/Oracle/Middleware/jdeveloper
src.home=..//..
# JDBC info used to create Schema
jdbc.driver=oracle.jdbc.OracleDriver
jdbc.urlBase=jdbc:orcl:thin:@localhost
jdbc.port=1521
jdbc.sid=ORCL
Buildfile: E:\Jdev_source\Infrastructure\Ant\build.xml
init:
[mkdir] Created dir: E:\Jdev_source\Infrastructure\Ant\classes
[javac] Compiling 1 source file to E:\Jdev_source\Infrastructure\Ant\classes
setProperties:
createDatabase:
refreshSchema:
BUILD FAILED
E:\Jdev_source\Infrastructure\Ant\build.xml:51: The following error occurred while executing this line:
E:\Jdev_source\Infrastructure\DBSchema\build.xml:100: The following error occurred while executing this line:
E:\Jdev_source\Infrastructure\DBSchema\build.xml:63: The following error occurred while executing this line:
E:\Jdev_source\Infrastructure\DBSchema\build.xml:28: java.sql.SQLException: No suitable Driver for jdbc:orcl:thin:@localhost:1521:ORCL
Total time: 32 secondsOracle is installed on the same server and DB is on the same server.
E:\Jdev_source>cd E:\oracle\product\10.2.0\db_1\jdbc\lib
E:\oracle\product\10.2.0\db_1\jdbc\lib>dir
Volume in drive E is Data
Volume Serial Number is E856-5E27
Directory of E:\oracle\product\10.2.0\db_1\jdbc\lib
13/11/2009 14:21 <DIR> .
13/11/2009 14:21 <DIR> ..
02/02/2008 14:49 1 609 607 classes12.jar
02/02/2008 14:49 1 622 075 classes12.zip
02/02/2008 14:49 1 617 382 classes12dms.jar
11/02/2008 19:52 1 646 217 nls_charset12.jar
02/02/2008 14:49 1 555 682 ojdbc14.jar
02/02/2008 14:49 1 563 375 ojdbc14dms.jar
02/02/2008 14:49 1 958 237 ojdbc14dms_g.jar
02/02/2008 14:49 1 950 033 ojdbc14_g.jar
8 File(s) 13 522 608 bytes
2 Dir(s) 7 992 795 136 bytes free
Regards.
Ok finaly it was this :
jdbc.urlBase=jdbc:oracle:thin:@localhost
If you look above , before, I had :
jdbc.urlBase=jdbc:orcle:thin:@localhost
:=(((
Now :
BUILD SUCCESSFUL
Total time: 35 seconds
Thanks again. -
Oracle Fusion Order Demo Application For JDeveloper error
HI,
i try to run the (Oracle Fusion Order Demo Application For JDeveloper) Fusion Order Demo (FOD) is an end-to-end application sample :
when i try to : Right click build.xml and choose Run Ant Target > buildAll . error coming
Buildfile: C:\JDeveloper\FusionOrderDemo_R2_1_revised\Infrastructure\Ant\build.xml
init:
[javac] Compiling 1 source file to C:\JDeveloper\FusionOrderDemo_R2_1_revised\Infrastructure\Ant\classes
setProperties:
createDatabase:
refreshSchema:
BUILD FAILED
C:\JDeveloper\FusionOrderDemo_R2_1_revised\Infrastructure\Ant\build.xml:51: The following error occurred while executing this line:
C:\JDeveloper\FusionOrderDemo_R2_1_revised\Infrastructure\DBSchema\build.xml:100: The following error occurred while executing this line:
C:\JDeveloper\FusionOrderDemo_R2_1_revised\Infrastructure\DBSchema\build.xml:63: The following error occurred while executing this line:
C:\JDeveloper\FusionOrderDemo_R2_1_revised\Infrastructure\DBSchema\build.xml:28: C:\Oracle\Middleware\jdeveloper\wlserver_10.3\server\lib not found.
Total time: 6 seconds
how i can run the build.xmlHi,
not quite sure the question is clear. The add cart command is a link defined in the JSPX file
<af:commandLink partialSubmit="true"
actionListener="#{shoppingCartBean.addItemToCart}"
id="cl3">
that points to
public void addItemToCart(ActionEvent evt) {
Map attributes = evt.getComponent().getAttributes();
invokeUpdateOp(new Integer(attributes.get( PRODUCT_ID_COL )+ ""));
in StoreFrontModule\StorefrontUI\src\oracle\fodemo\storefront\cart\view\managed\ShoppingCartBean.java . This is where you follow up then.
+"how i can make Repetition for the items in home.jspx"+
I can only assume you mean how to create the catalog items. Here I suggest you look at the demo source as this is what the demo is for. If you are new to ADF, I recommend that you first run a tutorial from here
If you are on 11g R1: http://www.oracle.com/technetwork/developer-tools/jdev/overview/index-100269.html
If you are on 11g R2: http://docs.oracle.com/cd/E18941_01/tutorials/toc.htm
No demo can replace proper learning, to be honest
Frank -
Customizing Track Purchase Order Fiori Application
Hi,
We have configured a standard "Track Purchase Order" Fiori application.
We want to change the Default Filter Criteria from "Last 7days" to "Last 30 days". Is there any configuration available, where we can change this?
Regards,
YuvrajHi Yuvraj,
You can achieve this by extending controller S2Custom.controller.js .
Change the default declaration to:To display last 30 days items by default
sFilterLastNDays : 30,
sFilterWithAlerts : false,
sSearchText : "",
sFilterKey : "FILTER30",
oFilterDialog : null,
and change the default setting of init method to: to set the default filter from 7 days to 30 days
this.oFilterDialog.setSelectedPresetFilterItem("FILTER30");
Regards,
Trilochan -
Javax.xml.soap.SOAPException in Fusion Order Demo Application
Hi,
I setup the Oracle Fusion Middleware. I also deployed the Oracle Fusion Order Demo Application in the soa_server. I placed the order in the store front web for the price of 3000. The Store font Service initiates the call to webservice (OrderBookingService) and aproved the order using BAM worklist application and then I found the below error in the soa_server_diagnostic log file.
=====================================================================================================================================
2011-01-14T11:17:27.525+08:00] [soa_server1] [WARNING] [] [oracle.bam.adapter.adc.soap.DOOperationsDispatch] [tid: BatchProcessorThread(0)] [userId: <anonymous>] [ecid: 0000Iq2VyNWDCgWFLzuHOA1DBcDA000CjD,1:30958] [dcid: b6be438a400b4064:-27d42103:12d7db2014a:-7ffc-0000000000001b7c] Error in batch webservice[[
javax.xml.ws.WebServiceException: javax.xml.soap.SOAPException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:784)
at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:234)
at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:105)
at oracle.bam.adapter.adc.soap.DOOperationsDispatch.batch(DOOperationsDispatch.java:103)
at oracle.bam.adapter.adc.soap.SOAPBatch.flush(SOAPBatch.java:107)
at oracle.bam.common.batching.BatchProcessor.run(BatchProcessor.java:1149)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:442)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:207)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
at java.lang.Thread.run(Thread.java:619)
Caused by: javax.xml.soap.SOAPException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
at oracle.j2ee.ws.saaj.client.p2p.HttpSOAPConnection.call2(HttpSOAPConnection.java:227)
at oracle.j2ee.ws.common.transport.HttpTransport.transmit(HttpTransport.java:75)
at oracle.j2ee.ws.common.async.MessageSender.call(MessageSender.java:64)
at oracle.j2ee.ws.common.async.Transmitter.transmitSync(Transmitter.java:134)
at oracle.j2ee.ws.common.async.Transmitter.transmit(Transmitter.java:90)
at oracle.j2ee.ws.common.async.RequestorImpl.transmit(RequestorImpl.java:275)
at oracle.j2ee.ws.common.async.RequestorImpl.invoke(RequestorImpl.java:95)
at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:741)
... 10 more
Caused by: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
at oracle.j2ee.ws.saaj.client.p2p.HttpSOAPConnection.post2(HttpSOAPConnection.java:516)
at oracle.j2ee.ws.saaj.client.p2p.HttpSOAPConnection$PriviledgedPost.run(HttpSOAPConnection.java:1232)
at oracle.j2ee.ws.saaj.client.p2p.HttpSOAPConnection.call2(HttpSOAPConnection.java:225)
... 17 more
Caused by: java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:525)
at java.net.Socket.connect(Socket.java:475)
at java.net.Socket.<init>(Socket.java:372)
at java.net.Socket.<init>(Socket.java:215)
at javax.net.DefaultSocketFactory.createSocket(SocketFactory.java:212)
at HTTPClient.HTTPConnection.getSocket(HTTPConnection.java:3606)
at HTTPClient.HTTPConnection.doConnect(HTTPConnection.java:4364)
at HTTPClient.HTTPConnection.sendRequest(HTTPConnection.java:3358)
at HTTPClient.HttpOutputStream.closeImpl(HttpOutputStream.java:461)
at HTTPClient.HttpOutputStream.access$000(HttpOutputStream.java:99)
at HTTPClient.HttpOutputStream$1.run(HttpOutputStream.java:417)
at HTTPClient.HttpClientConfiguration.doAction(HttpClientConfiguration.java:666)
at HTTPClient.HttpOutputStream.close(HttpOutputStream.java:415)
at oracle.j2ee.ws.saaj.client.p2p.HttpSOAPConnection.sendMessage(HttpSOAPConnection.java:1045)
at oracle.j2ee.ws.saaj.client.p2p.HttpSOAPConnection.post2(HttpSOAPConnection.java:491)
at oracle.j2ee.ws.saaj.client.p2p.HttpSOAPConnection$PriviledgedPost.run(HttpSOAPConnection.java:1232)
at oracle.j2ee.ws.saaj.client.p2p.HttpSOAPConnection.call2(HttpSOAPConnection.java:225)
at oracle.j2ee.ws.common.transport.HttpTransport.transmit(HttpTransport.java:75)
at oracle.j2ee.ws.common.async.MessageSender.call(MessageSender.java:64)
at oracle.j2ee.ws.common.async.Transmitter.transmitSync(Transmitter.java:134)
at oracle.j2ee.ws.common.async.Transmitter.transmit(Transmitter.java:90)
at oracle.j2ee.ws.common.async.RequestorImpl.transmit(RequestorImpl.java:273)
at oracle.j2ee.ws.common.async.RequestorImpl.invoke(RequestorImpl.java:94)
at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:741)
at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:234)
at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:105)
at oracle.bam.adapter.adc.soap.DOOperationsDispatch.batch(DOOperationsDispatch.java:103)
at oracle.bam.adapter.adc.soap.SOAPBatch.flush(SOAPBatch.java:106)
at oracle.bam.common.batching.BatchProcessor.run(BatchProcessor.java:1149)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
at java.util.concurrent.FutureTask.run(FutureTask.java:138)
at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$301(ScheduledThreadPoolExecutor.java:98)
at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:207)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
=====================================================================================================================================
Edited by: Raju Ilayaraja on Jan 17, 2011 12:18 AMHi,
BookingOrderProcess is working correctly. I am getting the below error periodically.It looks like some batch process is throwing the communication error.
[2011-01-17T19:16:26.231+08:00] [soa_server1] [WARNING] [] [oracle.bam.adapter.adc.soap.DOOperationsDispatch] [tid: BatchProcessorThread(0)] [userId: <anonymous>] [ecid: 0000Iq2VyNWDCgWFLzuHOA1DBcDA000CjD,1:30958] [dcid: b6be438a400b4064:-27d42103:12d7db2014a:-7ffc-0000000000001b7c] Error in batch webservice[[
javax.xml.ws.WebServiceException: javax.xml.soap.SOAPException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:784)
at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:234)
at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:105)
at oracle.bam.adapter.adc.soap.DOOperationsDispatch.batch(DOOperationsDispatch.java:103)
at oracle.bam.adapter.adc.soap.SOAPBatch.flush(SOAPBatch.java:107)
at oracle.bam.common.batching.BatchProcessor.run(BatchProcessor.java:1149)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:442)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:207)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
at java.lang.Thread.run(Thread.java:619)
Caused by: javax.xml.soap.SOAPException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
at oracle.j2ee.ws.saaj.client.p2p.HttpSOAPConnection.call2(HttpSOAPConnection.java:227)
at oracle.j2ee.ws.common.transport.HttpTransport.transmit(HttpTransport.java:75)
at oracle.j2ee.ws.common.async.MessageSender.call(MessageSender.java:64)
at oracle.j2ee.ws.common.async.Transmitter.transmitSync(Transmitter.java:134)
at oracle.j2ee.ws.common.async.Transmitter.transmit(Transmitter.java:90)
at oracle.j2ee.ws.common.async.RequestorImpl.transmit(RequestorImpl.java:275)
at oracle.j2ee.ws.common.async.RequestorImpl.invoke(RequestorImpl.java:95)
at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:741)
... 10 more
Caused by: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
at oracle.j2ee.ws.saaj.client.p2p.HttpSOAPConnection.post2(HttpSOAPConnection.java:516)
at oracle.j2ee.ws.saaj.client.p2p.HttpSOAPConnection$PriviledgedPost.run(HttpSOAPConnection.java:1232)
at oracle.j2ee.ws.saaj.client.p2p.HttpSOAPConnection.call2(HttpSOAPConnection.java:225)
... 17 more
Caused by: java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
Regards,
Ilaya -
JCA Binding Component connection issue in the Oracle Order Demo Application
Hi,
I setup the Oracle Fusion Middleware. I also deployed the Oracle Fusion Order Demo Application in the soa_server. I placed the order in the store front web.I initiated the webservice (OrderBookingService) and found the below error in the soa_server_diagnostic log file.
=====================================================================================================================================
Caused by: BINDING.JCA-12563
Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'Write' failed due to: JCA Binding Component connection issue.
JCA Binding Component is unable to create an outbound JCA (CCI) connection.
OrderBookingComposite:USPSShipment [ Write_ptt::Write(body) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510
JCA Resource Adapter location error.
Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/>
The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/file/FODFileAdapter'.
The reason for this is most likely that either
1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or
2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/file/FODFileAdapter. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR).
Please correct this and then restart the Application Server
The invoked JCA adapter raised a resource exception.
=====================================================================================================================================Thanks Guys.
I resolved the issue.
The issue is that FileAdapter for FulFillment mediator is missing.
Solution 1:
File adapter connection factory needs to be created via the weblogic console
The details below:
JNDI Name: eis/file/FODFileAdapter
controlDir java.lang.String /tmp/control
inboundDataSource java.lang.String jdbc/SOADataSource
outboundDataSource java.lang.String jdbc/SOADataSource
outboundDataSourceLocal java.lang.String jdbc/SOALocalTxDataSource
outboundLockTypeForWritejava.lang.String oracle
Solution 2:
seedFodFileAdapterResources target in $FOD_HOME/bin/common-sca-tools.xml needs to be executed to create the file adaptor.
Thanks.
Ilayaraja -
Setting Up the Fusion Order Demo Application, error in import Fod schema
Hello,
using Jdev11R1 ,Setting Up the Fusion Order Demo Application, and modify the properties in build.properties for my environment , but i don't undersatnd what is (src.home=..//..)
i followed the instraction to get demo FOD schema , right-click build.xml and
choose Run Ant Target > buildAll.
i got this
Buildfile: C:\FOD_11\Infrastructure\Ant\build.xml
init:
[javac] Compiling 1 source file to C:\FOD_11\Infrastructure\Ant\classes
setProperties:
createDatabase:
refreshSchema:
BUILD FAILED
C:\FOD_11\Infrastructure\Ant\build.xml:52: The following error occurred while executing this line:
C:\FOD_11\Infrastructure\DBSchema\build.xml:91: The following error occurred while executing this line:
C:\FOD_11\Infrastructure\DBSchema\build.xml:56: The following error occurred while executing this line:
C:\FOD_11\Infrastructure\DBSchema\build.xml:28: C:\FOD_11\Infrastructure\Ant\wlserver_10.3\server\lib not found.
Total time: 6 seconds
thanks
greenAppleI ran into the same problem. If the jdeveloper.home was set like below:
jdeveloper.home=C:\oracle\Middleware\jdeveloper
A Run Ant Target buildAll would produce the following:
Buildfile: E:\source\java\FOD_11\Infrastructure\Ant\build.xml
init:
[javac] Compiling 1 source file to E:\source\java\FOD_11\Infrastructure\Ant\classes
setProperties:
createDatabase:
refreshSchema:
BUILD FAILED
E:\source\java\FOD_11\Infrastructure\Ant\build.xml:52: The following error occurred while executing this line:
E:\source\java\FOD_11\Infrastructure\DBSchema\build.xml:91: The following error occurred while executing this line:
E:\source\java\FOD_11\Infrastructure\DBSchema\build.xml:56: The following error occurred while executing this line:
E:\source\java\FOD_11\Infrastructure\DBSchema\build.xml:28: C:\oracle\Middleware\utils\quickstart\wlserver_10.3\server\lib not found.
No where could I find the path C:\oracle\Middleware\utils\quickstart set in any of the scripts. If I hard coded the path in the fileset below
<path id="oracle.jdbc.path">
<fileset dir="${jdeveloper.home}/../wlserver_10.3/server/lib">
<include name="ojdbc6.jar"/>
</fileset>
</path>
I would just get another error further in the process when the jdeveloper.home was expanded again.
When I change the "\" to "/" in the jdeveloper.home (<fileset dir="${jdeveloper.home}/../wlserver_10.3/server/lib">) the build completed successfully. -
Problem in extracting the Fusion Order Demo Application
Hi,
I am trying to download the Fusion Order demo application and when extracting the zip folder getting the below error message. So, could you please get me the file or location where can get this file : FusionOrderDemo_R2.zip
Cannot open file: it does not appear to be a valid archive
Thanks,
RaghavendraSimilar problem reported here. Re: Unable to extract schema file for Fusion Order demo application
Would be interesting to understand what the issue is. Can you try the suggestions mentioned on the other thread and report back? -
Want to make a link in Customer order sample application!
Want to make a link in Customer order sample application! ( In Reply To : Re: How to send E-mail from customer order sample application ? ) Mar 22, 2004 6:24 AM
Reply
Is it possible to make a link for upload files from Excel? ( In Reply To : Re: Error in upload CSV file format ? )
I apologize again I want to make file upload and download link from excel to HTML DB Oracle , what I've to do in this regard, I want to make in the Customer Sample Application.If you explain in detail and steps than that will be very kind.
Thanks in advance !muhammad--
i am now more sure that you're asking what i thought you were asking, but i also now see where you might be getting confused. my original answer you your question (referenced above) still stands. i think you're getting confused, though, with the csv output functionality. it's not csv Input...it's csv output. that means it provides a link within your report region to allow users to download the data shown to a local csv document. there is no native functionality w/in htmldb to facilitate the uploading of spreadsheet data into one's application. in my original answer to your question, i said that my answer at the bottom of...
Bulk Insert, SQL*Loader style
...gives you an idea as to one way to enable this in your app.
hope this helps,
raj -
Deployment order across applications
I have a web app that implements ServletContextListener. This app on deployment
looks for an ejb on another app. How do I tell weblogic to deploy the web app
before the ejb app. These two have to be different applications. I cannot combine
them into the same ear. I am not able to find ways to identify deployment order
across applications. Any thoughts.
Any ideas on other approaches if this is not possible will be greatly appreciated.
Thanks in advance.We don't want the dependency between the EAR application and this web app. We also
plan to deploy this web app on multiple boxes that will require only a servlet
container and will not require an app server. Also the EAR app will be deployed
on multiple boxes and we do not want the extra overhead of this web app. Hope
this answers your question.
Do you know of any alternative approach to this problem since I do not see having
deployment ordering across apps in weblogic.
Thanks.
Gajendra Sanil
"Dimitri I. Rakitine" <[email protected]> wrote:
I'm curious, why you cannot deploy your EJBs and WAR in the same EAR?
Deploying them separately will result in a very serious performance
penalty because local RMI optimization will not be used.
Gajendra Sanil <[email protected]> wrote:
I have a web app that implements ServletContextListener. This app ondeployment
looks for an ejb on another app. How do I tell weblogic to deploy theweb app
before the ejb app. These two have to be different applications. Icannot combine
them into the same ear. I am not able to find ways to identify deploymentorder
across applications. Any thoughts.
Any ideas on other approaches if this is not possible will be greatlyappreciated.
Thanks in advance.--
Dimitri -
Where can I download the SOA Order Booking Application Zip files
the URL of Zip files is http://www.oracle.com/technology/soa/,which is descriped in SOA suite developer's guide,but I can not find it.where can I download the SOA Order Booking Application Zip files,thanks
The doc:
http://download-uk.oracle.com/docs/cd/B31017_01/core.1013/b28937/toc.htm
the zip:
http://www.oracle.com/technology/software/tech/webservices/index.html
SOA Overview
http://orasoa.blogspot.com/2007/05/newbie-getting-started-with-oracle-soa.html -
ERROR DEPLOYING A WEB SERVICE (SOA Order Booking application)
Hi everyone...
I got some problem here, I hope somebody help me...
So...
I've quite laboriously managed to get SOA Suite installed and I'm half way through the deployment of the order
booking demo, and encountered an error that I can't find a reference to in
online searches. I'm up to the step "4. Deploy the Credit Service application"
and get the following error:
Operation failed with error:
Error compiling :/home/oracle/product/10.1.3.1/OracleAS_6/j2ee/home/applications/SOADEMO-CREDITS
ERVICE-CreditService-WS/WebServices: Error instantiating compiler: Web service
artifact generation failed:oracle.classloader.util.AnnotatedClassFormatError:
Bad version number in .class file
Invalid class: org.soademo.creditservice.types.com.globalcompany.ns.credit.CreditCard
Loader: SOADEMO-CREDITSERVICE-CreditService-WS.web.WebServices:0.0.0
Code-Source:
/home/oracle/product/10.1.3.1/OracleAS_6/j2ee/home/applications/SOADEMO-CREDITSE
RVICE-CreditService-WS/WebServices/WEB-INF/classes/
Configuration: WEB-INF/classes/ in
/home/oracle/product/10.1.3.1/OracleAS_6/j2ee/home/applications/SOADEMO-CREDITSE
RVICE-CreditService-WS/WebServices/WEB-INF/classes
Dependent class: oracle.j2ee.ws.common.processor.modeler.wsdl.SchemaAnalyzer
Loader: oracle.ws.client:10.1.3
Code-Source: /home/oracle/product/10.1.3.1/OracleAS_6/webservices/lib/wsclient.jar
Configuration: <code-source> (ignore manifest Class-Path) in META-INF/boot.xml
in /home/oracle/product/10.1.3.1/OracleAS_6/j2ee/home/oc4j.jar
Deployment failed
Elapsed time for deployment: 53 seconds
#### Deployment incomplete. #### 20/06/2007 11:00:22
So, does anyone can tell me what am I have to do?!
Regards...I am currently having the same problem with the SOA Order booking demo application. All of the installation went fine until I tried to run the web client. Whenever I try to access http://localhost:8888/soademo, I get a 500 internal server error.
Did you ever find a solution for this problem?
Thanks in advance!
Marita -
Can I change the order of applications in the command-tab switcher?
I recently replaced my old computer running 10.5 with one running 10.8. It's a small thing, but irritating: in 10.5, when I hid an application, it would be bumped to the back of the switcher list, but in 10.8, the list is purely chronological in order. For example, if I hide Chrome now, a single command-tab would bring me back to it, rather than to the most recent non-hidden application, which is what I'd prefer. Again, I realize it's a small thing, so if there's nothing I can do about it, oh well, but I figured I would check.
Thanks for any help!Sorry there is no way to accomplish this.
The heads-up screen has no modifiable behavior other than it basic default for quick switching between apps.
Tab forward
Tilda backwards
mouse on any app -
Item order in application form
Hi,
Working on a larger form in a Portal application I get pretty bored by adding items to the form. They are initially put at the end of a form. To get get them in the right order (further up to the front) costs a lot of RSI-unfriendly clicking and vertical bar scrolling. Is there a cleverer way to do this (programatically)?
Thanks in advance,Hi,
What did u mean by item data in Smartform?
Please Clarify. -
Creating an Order Management Application
Hi,
I am about to undertake a project to create an order management program to take orders that will be entered by sales staff calling about 300 customers over the course of a week. I was planning on creating this using PHP with an oracle database as the backend, although after installing Oracle express I have found application express which I am now quite keen to use. I have a good knowledge of oracle and have used such things as oracle reports and forms, and I have only created basic applications in PHP.
My question is am I going to be best to stick with PHP or is application express a good route to go?
My only reservation about apex is the rather command line type manner that you have to use to lay it out, I’m thinking it is going to take a long time to get it looking nice.
Any feedback would be great!
Many thanks
EdYou're making a good choice here :)
Could you describe what you mean by 'command line type manner'?
One thing I would say is that you shouldn't underuse the wizards. When I started with APEX I started build all forms and reports manually, but now use the wizards all the time to quickly and easy get a complete and nicely laid out forms.
In terms of aesthetics, the default APEX templates are also more attractive than anything I could ever create when hard coding web applications. Having said this, APEX gives you full control of your layout if you wish to acheive something non-standard.
Maybe you are looking for
-
Error while opening hierarchy Location Analysis Report in Bex
Hi All, I encounter an error while generating a Bex report Location Analysis report which contains hierarchy for functional location.The infoobject is 0FUNCT_LOC. There is a global hierarchy created for this infoobject and within this global hierarch
-
Differeence between Lock object and enqueue_e_table
Hi , what is diff between Lock object and enque_e_table. Where to use enqueue_e_table and where to use lock object. I think with a lock object i can lock more than one table (passing tables in secondary table). Please correct me.
-
How do I get Napster songs to download to iPod Touch?
How do I get songs I have on Napster to download to my iPod Touch?
-
Control panel on my new 5745 is not working.
I just bought a 5745 all in one. The control panel on the printer is not working.
-
Need USB to RS232 and USB to LPT adapters
Hi, My Toshiba Satellite A100 has only 4 USB ports. I need parallel (LPT) and serial (COM) ports. How to solve this problem? I have adapters USB to LPT and USB to COM, wich work on my desktop, but they not work on notebook. Thank in advance.