Ordering the groups and columns in the Presentaion Services

Hi Gurus,
We are grouping the columns in the presetation Layer of RPD. Consider the senario like this GroupA having columns and sub groups subgroup1, subgroup2. When we navigate in answers it is displaying Group A under that subgroup1,subgroup2 and Group A columns. Can't we arrange it as Group A columns and then subgroups in the answers. Is there any config file to set the like this?
Please help me..It's urgent.
Thanks in Advance....

Hi user590267,
I'm experiencing the same and I don't see a way to change this standard behavior of OBIEE. The only workaround I have is to create a separate subfolder for the Group A columns..
Regards,
Stijn

Similar Messages

If you have a smart phone, can you conect it to the new wrieless ipad's or do you need to order the wireless service from verizon?

If you have a smart phone, can you connect it to the new wireless ipad's or do you need to order the wireless service from Verizon for ipad's or do you need to order the wireless service from verizon?

Kneehightoughguy,
You do not need to purchase service from a carrier unless you want to utilize the iPads connection to a 3G Network on it's own (directly). You may choose to add a Tethering plan onto your existing cell phone plan and to have an iPad connect to the Wifi connection that the Tethered phone would offer.
Always compare your usage and your costs, as your mileage may vary.
Brad

Catalogs, code groups and codes not available in service order in Web UI

Hi,
I have created and maintained a subject profile for the service orders that i am using for my business scenarios. The same is visible under the objects tab in transaction data of the service order business transaction in the SAP GUI.
However the same are not visible anywhere in the Web UI (they are not available in the list of available fields as well in BSP_WD_CMPWB for BT116H_SRVO).
Can some1 pls advice me with the steps so as to make the catalogs, code groups and codes in my service orders available in the Web UI screen as well.
Will really appreciate if detailed steps are provided since I am new to Web UI technology.
Warm regards,
DP

Deepak,
I'm 99% sure (although dont quote me as I dont have a developer key so I cant finish my testing) that you're missing the context Nodes - so although you have the assignment block yuo have no link between the code set and the service order header. You havent referenced them in your comments on this post in any case.
Try this:
Go into BSP_WD_CMPWB
In the Browser component Structure open folder Component > Views
Double-click BT116H_SRVO/DetailsOV and in the structure expand to BT116H_SRVO/DetailsOV > BT116H_SRVO/DetailsOV > View Controller > DetailsOV.do > Context
Right-click on folder Context Node and click Create
Follow through the wizard defining a Z context Node (e.g. ZBTSubject) and a Model Node of BOL Entity BTSubject
Define any Dependencies etc you may wish to have and so on (most of the wizard is optional)
Repeat the same for the BOL Entity BTSubjectSet
Now go back in and see if your values are populating. I'm not a developer (and never have been), so I cant guarantee this will work as I dont have a developer key to test this, but I am quite sure that this needs to be done for you to get your values populating.
Good luck, Merry Christmas and a Happy New Year (& please award points if useful!)
Andrew Griffin.

Ordering presentation tables and columns in aswers

Hi all
I have a product dimension structured like :
ProductDim
All
-BA
ba name
ba number
-RA
ra name
ra number
In answers the 'All' which is a presentation column is displayed after BA and RA which are presentation tables .Is there a way to change this order??
Regards
Adil

No, unfortunately this is not possible. When opening a folder x, first all the underlying folders are shown, then the underlying columns (of folder x). The only workaround is to create a folder 'Folder All', holding a column 'Column All'.
Regards,
Stijn

Update showing up in "Compliance 5 - Specific Computer" Report even after removing the update from the Software Update before creating Group and Package

So I've created a Software Update Group and I did NOT want anything in there dealing with Internet Explorer 11 since the organization is currently stuck at using 10 as the highest. So I made sure that Internet Explorer was NOT in the list and then I deployed
the package.
After running my Overall Compliance report it shows that the systems are compliant, but when I view the "Compliance 5 - Specific Computer" I see that "Internet Explorer 11 for Windows 7 for x64-based Systems" is listed in the report.
This is just a testing phase right now and I have not created a WSUS like Domain level GPO. I understand that the SCCM client creates a local policy on the clients for the location of the Software Update Point (Specify
Intranet Microsoft update service location), but the "Configure Automatic Updates" policy is set to Not Configured, which it looks like when this
is set, the "Install updates automatically (recommended)" at 3AM is the default.
Is the reason why the "Internet Explorer 11 for Windows 7 for x64-based Systems" update is showing up in the list due to the fact that the "Configure
Automatic Updates" policy is set to Not Configured
and therefore it is still reaching out to check Windows Update online?
So, if I do create a Domain level GPO to Disable the "Configure
Automatic Updates" policy, then the "Internet Explorer 11 for Windows 7 for x64-based Systems" update would not show up in the "Compliance 5 - Specific Computer" report?
By the way, I have a Software Update Maintenance Window configured for the hours of 1AM-4AM so the 3AM default time falls within this time frame, therefore, I am assuming the SCCM 2012 client will not allow the Windows Update Agent to install the "Internet
Explorer 11 for Windows 7 for x64-based Systems" update, even though it has detected it is "Required".
Thanks

But, don't you need a Deployment Package in order to deploy the Software Update Group? The Software Update Group uses the downloaded updates contained in the Deployment Package located in, wherever the Package Source is, right?
One more quick question that you will know right off hand, because, well, you just will I'm sure.
No. The software update group really has nothing to do with any update packages. The update group assigns updates to clients and in turn clients use update packages to download assign and applicable updates from. There is no connection between the two though
as the client can download an update from any available update package. Thus, it's more than possible to updates in an update package that are not in any update groups and it is also possible for an update to be in an update group without being in any update
package.
If the "Configure Automatic Updates" policy is set to "Not Configured" and since this keeps the 3AM Automatic Updates default, if I was to remove the Software Update Maintenance Window from being between 1AM-4AM, will the WUA agent install updates
at 3AM, or no because the SCCM 2012 client still manages and oversees it and basically blocks that from occurring?
No, ConfigMgr does not in any way block the WUA; however, the WUA can only autonomously install updates it downloads directly from WSUS. Thus, since there are no updates approved or downloaded in your WSUS instance, there's nothing for it to download and
install. If you happen to actually be going into WSUS and approving updates (which you should not be doing as its unsupported), then yes, it actually would install updates -- this is outside of ConfigMgr's control though. Generally, disabling the WUA via a
GPO is the recommended to prevent any accidental installations or reboots (as the WUA wil also check for initiate pending reboots outside of ConfigMgr).
Lots more info in these two blog posts:
- http://blog.configmgrftw.com/software-update-management-and-group-policy-for-configmgr-what-else/
- http://blog.configmgrftw.com/software-updates-management-and-group-policy-for-configmgr-cont/
Jason | http://blog.configmgrftw.com

Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in oracle and yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.

Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in Oracle and yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.

Thanks for your advise.
However, I missed to mention that we have two set of users One is for Finished Goods and another for Spares.
Only Spares users need to be prevented from creating Direct/Manual Sales Orders in Oracle.
As you suggested, if this will be done at Form level, that may Disallow FG users also to create Manula Sales Orders which should not be the case.
Further, I tried to test one scenario through Processing Constraints but it did not work.
Application
OM
Validation Type
Entity
Temp
Short Name
TBL
Validation Semantics
Created By
Equal To
User(Myself)
Processing Cosntraint
Application
OM
Entity
Order Header
Constraint
Operation
User Action
Create
Not Allowed
Conditions
Group
Scope
Validation Entity
Record Set
Validation Template
101
Any
Order Header
Order
Above Created
Please advise.

How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?

Dear SharePoint Developers,
Please help.
I need to know How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?
I think this is a "sealed column", whatever that is, which is shown in SPD 2013 as a column of content type "document, folder, MyCustomContentType".
I know when I set the column order in my custom Content Type settings page, it is correct.
But, when I load the NewDocSet.aspx page, the column order that I set in the settings page is NOT used for this "sealed column" which is bad.
Can you help?
Please advise.
Thanks.
Mark Kamoski
-- Mark Kamoski

Hi,
According to your post, my understanding is that you want to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx.
Per my knowledge, if you have Content Type management enabled for the list or library (if you see a list of content type with the option to add more), the display order of columns is set for each content type.
Drill down into one of them and you'll see the option under the list of columns for that content type.
To apply the column order in the NewDocSet.aspx page, you need to:
Select Site Settings, under Site Collection Administration, click Content type publishing. In the Refresh All Published
Content Types section, choose Refresh all published content types on next
update.
Run two timer jobs(Content Type Hub, Content Type Subscriber) in central admin(Central Administration--> Monitoring--> Review timer jobs).
More information:
http://sharepoint.stackexchange.com/questions/95028/content-types-not-refreshing-on-sp-online
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How can I make Numbers respect the row and column locks in an Excel workbook opened in Numbers???

I have a Windows server app that generates Excel workbooks to be emailed to political campaign volunteers to be loaded into Numbers on an iPad, edited, then emailed back to be posted to the server database. There are two problems encountered:
1. The Excel workbook has the first row (column headings) and first column (route identifier) of cells locked, so that they will not scroll off the screen, but Numbers doesn't respect the locks, so when the user scrolls horizontally or vertically, the column headings and/or the route identifier scroll off the screen.
2. The Excel workbook has pop-up "tool-tip" type comments in certain column headings in order to provide the user with the acceptable entries for those columns, but Numbers does not respect those. When the user touches any of the commented column heading cells, a context menu appears instead of the comment.
What must I do in the Excel workbook sheets, or what settings can be made in Numbers to correct the above?

I imported a Numbers '09 file into Numbers on the iPad. All comments were removed during import. Frozen header row and column were retained.
Thank you for your responses I must ask, however, when you refer to "importing" the Excel file, are you referring to a two step process whereby the Excel file is first converted by some other process into Numbers format, then opened in the Numbers application - which is what I have to do in my PC application to generate the Excel file, and reverse that process to convert the Excel back into my database format - or are you simply referring to opening the file in Numbers as "importing" it? And please excuse any ignorance, as I'm not at all familiar with Apple's terminologies. In fact, I don't own an iPad myself, but rather I have to depend on one of my clients to do the testing for me.
I imported an XLSX file into Numbers on the iPad. The file used "freeze panes" to "freeze" the first column and row. Only warning on import was that it changed fonts. It imported without the first row and column frozen and with no comments. Nothing I can do about the missing comments but it was a simple matter to turn the first column & row into headers and freeze them.
Unfortunately this would not be an efficient solution, since the end users are, for the most part, elderly political campaign volunteers who are fairly computer illiterate. These workbooks are actually canvassing lists - known as walklists. Their purpose is for the volunteers to interview voters, record the results of the interviews, and post the results to a database, which provides the campaigns with valuable strategizing capabilities. Also, these workbooks have multiple pages - as many as 10 or more. and from what I infer from the above, the setting changes would have to be made on each page.
My whole intent in developing this iPad/Tablet methodology was to significantly reduce volunteer's work - which is a recruitment benefit - and eliminate paper. While the latter would be accomplished, the former would not, and in fact would tend to increase it. It's necessary to keep the first row - column headings - and the first column - the route identifier - from scrolling off the page, so that the volunteer won't have to keep scrolling up and down and right and left to know what the data are.
Conclusion: Comments are not supported on the iPad version of Numbers. Frozen headers are not imported from Excel but can be recreated easily.
I was previously directed to the Apple website http://www.apple.com/ipad/from-the-app-store/apps-by-apple/numbers.html which extols the wonders of the Numbers application. About halfway down the page there's a section regarding, "Sliders steppers and pop-ups". The web page states that pop-ups can be set up but, being a marketing site, gives no indication whatsoever as to how it's done. I was hoping someone could tell my if there's any way to carry them over from an Excel file.

Displaying the Row and Column number in the report

I am trying to show row and column number in the report (not just web preview). I am using Hyperion Reports Version 7.2.5.168

use a formula column/row. use RANK function in that. (e.g. Rank([A], asc) will sort the rows based on column A values in ascending order)
you can use this rank in your heading.
But frankly this is not so easy. You have to do it in a very intelligent way, so that rank gives you column number/row number any how.
Have a try and let see if you find a appropriate solution.
Regards,
Rahul

How to change the order of groups in AdvancedDataGrid

Hello,
I have a dataset similar to the following:
Region   Sales
======   ======
North     10
North     15
South     5
East      20
West      5
West      4
West      3
I'd like to group by Region and sort the groups by the Sales subtotal for each group. I already have the data grouped correctly using GroupingCollection2. How can I sort the groups by the sales subtotal (it sorts by region name by default)? I've seen some posts that talk about creating a custom groupingObjectFunction and applying a group sort. But I'm still confused. Can someone give me some pointers on how to achieve this?
So ideally, the AdvancedDataGrid would end up looking like this with the regions sorted by sales subtotal;
Region    Sales
======    ======
North
          10
          15
subtotal 45
East
          20
subtotal 20
West
          5
          4
          3
subtotal 12
South
          5
subtotal 5

Thanks, I looked at that earlier but it doesn't contain the solution I was hoping to find.
I ended up not using GroupingCollection. I think GroupingCollection is cool, but it isn't really customizable to the extent I need.
I just ended up transforming my data into a hierarchical form that could be used directly by AdvancedDataGrid. At the top level of my hierarchy, I have the detail txn groups, subtotal groups, and grand total groups. To sort the groups, I use custom SortFields. So, for example, if I want to sort by group name, I add a SortField for the groupName attribute. Both the Detail Group and the Subtotal Group share the same group name. Then I add a SortField for a summaryRow attribute. Only the subtotal group has that attribute. This ensures that the Detail Group is always followed by the associated Subtotal Group after sorting. I store my groups in an XMLListCollection and then set the sort attribute, then call refresh().
Not ideal, but it works. If my requirements were more complex, perhaps my approach wouldn't have worked as well. But as it stands it works well and has good performance.
I was hoping that ADG could handle this kind of sorting for me, but after looking at the source code, it seems like this is not possible without implementing my own custom GroupingCollection class and possibly other supporting classes.
One key thing to note is that clicking the column header to sort within groups works fine. However, if you then attempt to sort at the group level, ADG hangs while trying to refresh itself. The trick is to assign the dataProvider.sort attribute to a temporary variable, then set it to null (this sort variable contains the ADG column sorts that the user clicked). Apply your group level sort and then reapply the dataProvider.sort attribute.

How can I get the second group and report totals in Matrix report?

Hi,
I have created a matrix report with 2 break Groups.
Iam getting columns totals for the first group, but not for the second group and the report totals.
How can I get the second group and report totals for each month?
Thanks.
Ram.

Hi Ram,
If you want a total at any group-level, go to the particular group in the data model, insert a summary column in the group, and select
Reset At > appropriate Group Name
For report level summaries, you must create the summary column outside of all groups.
Navneet.

Question about the Cluster and Column width in Graphs in Illustrator CS2

How do they relate to each other? How do the Percentages work together? Is there any information about how you can mathematically figure how much area each Cluster width takes. If you make a graph and make both the cluster and column widths 100%, the entire area is filled. If you make the Column width 50% the bar will sit exactly in the center of the Cluster width, but if you make the cluster width 75%, the bars move closer together.

Gregg,
The set of bars that represent each row of data in the graph spreadsheet is called a "cluster".
Let's let
   W = the width of the whole area inside the graph axes
   R = the number of rows of data
   C = the number of columns of data
Then the maximum potential space to use for each row of data is W/R. The cluster width controls how much of this potential space is assigned to each row. This cluster space is then divided by C, giving the maximum potential width of each bar. The maximum potential width for each bar is then multiplied by the column width percentage to get the actual width of each bar.
So the actual width of each bar is ((W/R)*Cluster width)/C)*Column width
The graphs illustrated below have three rows of data, with two columns each. The solid colored areas in the background have the same cluster width as the main graph, but they all have a column width of 100%. This lets you see more easily how the gradient bars that have a column width of 80% are using up 80% of their potential width.
Notice that as the Cluster percentage gets lower, the group of bars that represent a row of data get farther apart, so that you can more easily see the "clumping" of rows. When the Cluster percentage is 100%, the columns within each row are no closer to each other than they are to the columns in other rows.
As the Column percentage gets lower, the bars for each data value occupy less of the space within their row's cluster, so that spaces appear between every bar, even in the same row.

Restriction to Costing Tab in the Maintenance Order Change (IW32) and IW33?

Hi Gurus -
          I want to restrict the access to costing TAB for a specific Planner Group and Plant.
          Can I restcit the access to costing tab using Authorisation Role?
          Which Authorisation Objects and values I should use.
         Kindly advice.
Thanking and with best regards,
Narendra Dere

Hi Narendra,
This can be done with help of your ABAP team. There is no standard authorization object to do so.
Take help of your ABAP team. create one customized authorization object Z_COSTTAB having field as planner group and plant.
user BADI IF_EX_IWO1_ORDER_BADI - Authorization Check for PM/CS Order.
With this badi check add check for auth object which you have created. Assign this auth object to ur required user role.
This will solve your problem.

The new table and Columns to look for in picking headers, etc

Hi,
What are the new tables and columns to look for mapping the following old ones:
1) Pick_Slip_Number from So_Picking_Headers,
2) Sequence_Number from SO_Picking_lines
3) Line_ID from So_Note_References
Thanks and Regards,
Praveen

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by ravi alladi ([email protected]):
Actually would it be possible to get a list of all changes in Order Management between 11 and 11i? ie what tables added, what have been modified and which ones are obsolete<HR></BLOCKQUOTE>
Ravi
Actually, we are working on that same analysis. If you receive any responses, please forward to myself as well.
Thank you
Sha Green

SQL Query to re-order the columns

Hello All,
I want to know if it is possible to re-order the columns of a table once the rows has been inserted in all the columns.
So for e.g I have initially a table containing 3 columns COL1, COL2 & COL3.
Now after data has been inserted into the table, I want to re-order the columns like COL3, COL2, COl1 or may be COL2, COL1, COL3 etc keeping the data intact.
Cheers,
Parag

Parag Kalra wrote:
I want to know if it is possible to re-order the columns of a table once the rows has been inserted in all the columns.
So for e.g I have initially a table containing 3 columns COL1, COL2 & COL3.
Now after data has been inserted into the table, I want to re-order the columns like COL3, COL2, COl1 or may be COL2, COL1, COL3 etc keeping the data intact.Why? What is your reason for wanting to do this? What do you want to achieve by it? If we understand the actual problem, then we may be able to provide some usable suggestions.
The reason why your request makes very little sense is that the physical sequence of columns in a row in a datablock, has no impact on you as developer writing code.
Why? Because you control the order in which you want to select columns. You control the order in which you insert columns. You control the order in which you update columns.
SQL allows you the programmer to specify the sequence of columns, and subset of columns, that you want to use in your SQL.
Why would you want to change the physical table definition, and rewrite the entire table on disk (using very expensive I/O) to reorder the physical column sequence?

Ordering the groups and columns in the Presentaion Services

Similar Messages

Maybe you are looking for