OS 3.1.2 Update didn't fix the "updating library, please wait a few minutes
I was hoping that the software update would fix the "Updating library, please wait a few minutes" screen that comes up when I try to play a song on my ipod touch after syncing. Is this bizarre "updating library" delay going to be a permanent feature of the ipod touch now? Could someone from Apple please clarify if you are trying to fix this, or is this just the way it is now?
If you (Apple) aren't going fix it, I hope you make it known in your marketing for the ipod touch that you can't listen to your songs immediately. If you don't disclose this, I sure hope the Zune touch people make a big deal out of it when promoting their mp3 player. I woudn't have bought an ipod touch if I had known I had to wait 2-10 minutes to listen to a song.
I suspect there's something else going on here... I'm having terrible trouble syncing films, and even tho they are clearly there, they don't seem to load in the list... I noticed that especially if I had dropped my network connection - the list would disappear (and this is on multiple touches)... It then starts to look very like my issues on Apple TV, where if it cannot verify the film back throught the network to the store, it deletes the content from your box... I suspect that each time it loads on the touch, it's doing some kind of 'legitimacy' verify, and that's what's causing the problem.... If I crash the sync just before the end, the re-index seems to work okay, but there is still that slight delay....
Similar Messages
-
MSI didn't fix the temperature issue for AMD 64 processors. I'm sure.
For people who didn't read my previous posts;
MSI claims in BIOS 1.4 (for the MSI K8N Neo Platinum) that they fixed the problem that the CPU gets (for example) 54 degrees idle and 74 degrees load.
They didn't. They just made up a fake solution.
Here are my arguments.
- When I start my computer, after a cold long night in which the computer was turned off, I see 42 degrees for my CPU in the BIOS. This is when I go DIRECTLY to the BIOS in the POST. 42 degrees? That is impossible. The temperature in my room is around 20. It can't get so high so fast. My Northbridge is 21. In the old BIOS 1.3 it was the same; when you started your computer the BIOS showed temperatures like 52 etc.
- When my computer has started Windows XP, I start Core Center. There I see my CPU temperature. It is 39 degrees for my CPU. Ridiculous. My old AMD XP 1800+ started with a minimum of 29 when Windows started. After that the 1800+ increased to 48 degrees.
But ok, when I use the trick which some people used in BIOS 1.3 to get true readings (restarting their computer with a soft boot), I see 34 degrees for my CPU. This reading is the only true reading. Isn't it weird that when I have my computer turned on for about 4 hours, with whole the time readings like 42 degrees idle, and I restart, I just get 34 degrees... WITHOUT fluctuating temperatures to hell and back...
My conclusion is that MSI just made something up like '74-20 = 54 degrees in load and 62-20 = 42 degrees idle'.
Also, the temperatures are fluctuating to hell and back. It goes from 58 degrees in load to 54 to 50... Whatever...
This board is great, but this problem really, really s u c k s. FIX this. We have the right of correct temperature readings. We spend money for it.
Regards,
MeQuote
Originally posted by Tiresmoke
I know you are frustrated but if you read the link I just supplied you will find this is a user to user forum and NO MSI techs are here at all.
Regardless, people are still encouraged to post their problems here as well. In case there is a solution or workaround (see Wannafly's response and mine as well regarding vcore).
Quote
We are users helping each other. If you must speak with an MSI tech you can always contact them from the MSI main page. Oh and it is not likely they will answer if you attack them the way you are writing in this forum. Now would I for that matter.
I do agree that some in this thread have crossed the line and need to watch it .
Quote
So play nice folks or there won't likely be a second warning.
Very good advice!
Quote
Yes there can stilkl be temp issues especially with the newcastle core CPU's. The new Bios is still a work in progress. There are a lot of combinations they need to work out. But if you contact MSI with a complaint in a cival manner and let them know what experience you have you may even get a new beta bios to try and see if it will solve your issues. Or they may have other suggestions. However they can't fix stuff they are not aware are broken and most of the problems disappeared when they released 1.4. So let them know about what you have.
Been there done that. They were responsive in the beginning. Continued to send them very polite and factual updates as I tried new BIOS updates but have long since ceased to receive any response at all. Again, I say I don't blame MSI. Just want a fix.....
Quote
Oh yes and running these chips in the 50C+ range at full load is still within reason.
I reread the thread a few times, and I don't see where anyone is claiming that they feel like that's a problem, so I'm confused about the relevance of this statement . The problem that's been mentioned here is that the temperature is being REPORTED at 50+C at IDLE load conditions when it obviously is NOT that hot. Restart of the machine immediately then shows an IDLE temp of 30C. Even though 30 seconds prior it showed 50C with just as low of a load since it was right after cold start? THIS situation is NOT within reason.... And it's very repeatable, cause I see it every single day -
Hi,
I'm in Nova Scotia, Canada and when I try to use Siri it loads and loads and then says, "I'm really sorry about this, but I can't take any requests right now. Please try again in a little while."
I rebooted and it didn't fix the problem. I just got my iPhone 4s (unlocked right from Apple) several weeks ago.Siri has been a bit more erratic than usual in the last week or so. Apple has announced a major announcement for 9/12. Conclusions are left to the reader.
Best of luck.
(Occasionally from Lower Economy, Colchester County). -
during a update of apple my iphone 3GS crashed an now the operating system wont load up..ive tried to reset the phone to the factory settings using itunes it took 4 hours and completed but my phone still wont come on..what can i do to fix the problem? please help #
In trying to include what information all that I could I should have specified I DON'T KNOW THAT IT WAS DEFINATELY JAILBROKEN when I took it to the apple store they told me there's no way for them to tell if it was jail broken or not. I'm only going by what ppl have told me COULD HAVE BEEN DONE TO THE PHONE. With that said the only thing I know for sure is that the apple tech at the Genius Bar told me that someone took control of my root menu in February & I've had no control of my phone since. I asked him how to regain control & how he knew his exact words were "oh that is out of our scope of capabilities here at this level & you would need an apple engineer to fix it". I said ok then how do I get an apple eng then? He laughed & said you can't!!!! To which I was furious I came home & called apple requesting to speak w/the fraud dept to file a report they said we don't have a fraud dept!! So after a 45 mn phone call again I left w/no answers.
@TJBUSMC1973-
I DON'T HAVE THOUSANDS OF DOLLARS TO SPEND HIRING AN ATTORNEY & Although I appreciate your suggestion I fail to how an attorney would be able to facilitate in any way since there's no suspect. I cannot prove that it's him doing it so I certainly can't pursue legal action w/no proof & no money. :'((
Again I thank you for your advice but I don't think that will help.
I was looking more for a TECHNICAL way to avoid this happening w/a new phone should I buy one or trying to get them out of my phone now! Such as installing some kind of software protection?? Someway to clear out the entire phone (other than factory reset which was done 10 x's w/no success, etc. if this person got in then there HAS TO BE A WAY OF GETTING HIM OUT, right???? -
I managed to transfer the music from 1 pc to 1 other pc (it is played perfectly on the other PC (Windows 7- pc) by the newly downloaded and installed iTunes, version 10.6.1.7). But I didn’t fix the transfer of the meta data (for example the rating). Does anyone know how to use (or import) your old playlists, etc..(= meta data) on the other PC? So, short: how to migrate the meta data from one pc to an other pc?
It's a pity that it seems not to be possible to import on the new pc e.g. the ratings!!!
I don't want to start again with rating my (beautiful classical) music!
Thanks, from Amsterdam, NLDid you do the move via Home Sharing, astro?
If so, perhaps try the instructions from the following post:
Re: i transfered itunes to my pc playlists did not go -
Listing order and dates of my photos have all changed and now it is a mess in my photo library! I tried to list them again by date, but it didn't fix the problem. What to do?
If your preferences keep getting messed up try this: make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
Happy Holidays -
Why u didn't fix the maps in iphone 5 yet ..? it can't locate me right i'm mahmoud from egypt
why u didn't fix the maps in iphone 5 yet ..? it can't locate me right i'm mahmoud from egypt
and it can't find places right tooSiri has been a bit more erratic than usual in the last week or so. Apple has announced a major announcement for 9/12. Conclusions are left to the reader.
Best of luck.
(Occasionally from Lower Economy, Colchester County). -
When I use Firefox without menu bar I can see bookmarks. How ever when I activate menu bar the bookmark is missing from toolbar. I tried opening in safe mode and resetting toolbar but it didn't fix the issue. I am using version 7.0
Do you mean the Bookmarks Menu button on the Navigation Toolbar?
You only see that button if the menu bar is hidden. -
Personal hotspot has dissappeared from setting, I tried resetting my network setting but that didn't fix the problem
Have you tried to erase your drive and reinstall the OS - you should use recoery (hold Command + R keys while restarting). Since the items in the menu bar are part of the system, a clean reinstall of the system should take care of it.
As it is dangerous to post private information in a public forum, I will ask the hosts to remove it.
FWIW, we are all other users here - you are not addressing Apple. -
I did the fix but it didn't fix the issue. It allows me to create the script but when it runs it will not add the user account.
Here is all the same setting aside from the user info being created.
https://www.dropbox.com/s/kkxmhls3bfs6ns3/Apple%20Support%20Installer%20Script.p kg -
it shows in the disk utilities but does not allow me to find a problem or fix the problem? Please help. also my external hard drive is a seagate free agent go, 500GB. it is visible on my tv but has no files in it… i'm scared i've lost everything?
Honestly i cannot remember sorry, i got it like 5 maybe 6 yrs ago and just started downloading things to it as the memory on the computer started filling up and when i wanted to see photos/videos on my TV.
My wife did tell me after i had written this post that she did try and record TV to it as it was plugged in. I think by doing so somehow has deleted everything. It reads on my TV yet has no files in it but won't show up on my computer. hope this helps.
Starting to think it is going to cost more to retrieve files on it than it will be to buy a newer and larger one. -
How do I fix the itunes library.itl file is locked/
How do i fix " the itunes library.itl is locked?
Read the part about changing permissions on the iTunes folder in: https://discussions.apple.com/message/11583914
iTunes: Missing folder or incorrect permissions may prevent authorization - http://support.apple.com/kb/TS1277 - Shared folder issues with Store authorization.
gittekjaerulff I have bought a new laptop (not a Mac)
You posted in the Mac forum but say you are not using a Mac. I'll request your post be moved to the Windows forum. -
HAVE BEEN UNABLE TO RETRIEVE MY OLD LIBRARY OF PHOTOS, ALBUMS AND PROJECTS SINCE DOWNLOADING AN APERTURE 3 SOFTWARE UPDATE TWO DAYS AGO. THE NEW LIBRARY ONLY HAS A FEW NEW PHOTOS IN ONE FOLDER
PLEASE ADVISE AS HOW TO RETRIEVE OLD APERTURE LIBRARY WITH ALL MY PHOTOS, ALBUMS AND PROJECTSFind the old Aperture library in the Finder and double click it to launch Aperture with that library set to the default.
And check your caps look key. It appears to be stuck. -
I cannot access my words with friends on my ipad. For a brief second a screen will come saying "updating this will take a few minutes" . It has been 15 hours! What can I do?
That means the person you are playing doesn't have the app on their phone!! And they can only play on the PC?
How about asking the person your playing if they have the app or not.
If you don't want help here, you can more than ask the WWF developer why your having trouble.
You can take your attitude somewhere else!! -
I have noticed that my iphone 3GS,the app store crashes when trying to view "purchased" apps. I never had this problem until I updated to IO6. I still I have the problem with new update IO6.1. Its only in my main itunes account [email protected] that it crashes when trying to view the "purchased" apps. With my other itunes accounts I can see my purchased apps. I dont understand why this is happening, this is extremely frustrating! I have been using my main account ever since i bought my iphone 3GS over three years now and never had a problem. Please help. I know there are many other out there that have the same problem.Why isn't this problem fixed yet?????
Same here and no IOS6.1 didn't fix mine either.
I don't this problem is ever going away.
Maybe you are looking for
-
Snow leopard freezes but works fine in safe mode
I have been using snow leoprad and it hangs after login to the system (from the first one/two minutes). But it works well in safe mode . So far the things I have tried are - repair the disk permissions, verify the disk , created a new user account
-
Submit report repeatedly through loop
Hi Experts, I need to submit report in loop. For that i have used SUBMIT as follows loop at itab into wa_it. SUBMIT ('ABC') VIA SELECTION-SCREEN WITH s_item = wa_it-item AND RETURN. endloop. The above statement works fine. But i want
-
ORA-01704: string literal too long and PHP
Ok all of you Oracle experts out there, I've had one heck of a day wrestling with this oracle stuff. I've had a couple of posts/threads today with great success and currently I face another problem. I'm using PHP/PEAR to execute my queries on an orac
-
Advanced table addanotherrow button
Is there any way that i can disable validation to the addanotherrow button in the advanced table? Unless i fill all the fields which are mandatory in the page, its not allowing me to add another row in the advanced table. Thank you PK
-
Move Web Analyzer component to another server
Hi All, I have to switch the Web Analyser component to another server in the same FARM. Is there any steps available to move the service without any data loss? Web Analyser component can be created by updating the deployment.xml file in Admin server.