OS X and External HD

Hello,
just wanted to know if I can install os x on my external hard drive.
I have WD firewire HD, and my pc is a macbook 1.83GB intel.
thank you.

Sure. Boot from the clone and then install it. To temporarily start up from the clone restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the icon for the external drive and then click on the down arrow button. After you install the software restart the computer and it will start up from the internal drive.
Alternatively, install iLife on your internal drive. Get a good backup utility and do an incremental backup. This will add only new files to the external drive.
My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
7. SuperDuper! (Commercial)
The following utilities can also be used for backup, but cannot create bootable clones:
1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
2. Toast
3. Impression
4. arRSync
Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore. Also read How to Back Up and Restore Your Files.

Similar Messages

Time Capsule and External HD as Network Attached Storage

I was wondering if I can
a. Attached and external hard drive to my Time Capsule and access is wirelessly?
b. Back up to that external hard drive using Time Machine?
c. Access that external hard drive and Time Capsule from a remote place off site?
Thanks

a. Yes
b. I think so. But why not just use the TCs hard disk for TM backups?
c. Apparently so based on these instructions I have found: (Haven't tried it myself)
In the Finder preferences check the box "show server" to mount to desktop.
Under Airport Utility:
Disks - check over wan and check file sharing and write down the ip address
Under the Finder, use the GO function to find your server ie the hard drive on the TC. In the window provided type afp://ip address then password if applicable. The hard drive should mount and be shown on the desktop.

What is main diff b/w imported Archives and External Defination in IR

What is main diff b/w imported Archives and External Defination in IR

Hi Vijay,
ED-standard schema for describing the message structure.If you have the structure provided to you from some external application you can use it in PI directly without recreating in PI.you can import following formats which are used to describe message schema
WSDL (Web Service Description Language),
XSD (XML Schema Definition Language),
DTDs (Document Type Definitions)
Imported Archives: its used basically for java and xslt mapping where you create the required mapping externally using some tools
(java-eclipse/NWDS .XSLT-stylus studio).You can also implement XSLT and Java mappingsf and save them as archives in the Integration Repository.
read More details here
[ED|http://help.sap.com/saphelp_nwesrce/helpdata/en/26/9e97b0f525d743882936c2d6f375c7/content.htm]
[Imported Archives|http://help.sap.com/saphelp_nw04/helpdata/en/4c/b2ad3de2d76b3be10000000a114084/content.htm]
Regards,
Srinivas

Macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again

macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again lik it did before

If you have records that show that you've taken your MacBook Pro in for a year to fix the machine, I would escalate the problem to Apple Customer Relations - unfortunately I don't have a number for Spain.
It would only seem logical to me that if you've been trying to have the machine repaired during the time that the 'recall' was in effect that you should be eligible for a new logic board. But only customer relations will be able to make that call.
Good luck - take the issue as high up the food chain as you can and see what happens.
Clinton

Mid 2010 Macbook Pro sleep and external display problem

I recently upgraded to the new 2010 15 inch core i7 Macbook Pro. The problem i have is that it will not detect an external display (23inch Cinema) after waking from sleep. This happens after using the display to extend the desktop and also when using the Macbook in closed mode.
I've managed to get it to detect the display only after either restarting the Macbook completely or by going into energy saver and switching to dedicated graphics then going back to detect display.
It seems that when on integrated graphics it doesn't register that an external display is connected. If i leave a program open and running that causes the dedicated graphics to kick in then it works ok. If i close all programs, shut the macbook pros lid, computer sleeps and external display shuts off. If i click the mouse to wake with lid closed, apple logo lights, machine starts up few seconds later macbook returns to sleep. If i open the screen the machine wakes as normal but the external monitor doesn't.
Any help is much appreciated as its starting to frustrate me now...
Many thanks
oh and im running OSX 10.6.3

I thought it was intermittent to begin with until i started looking into it. By leaving programs open, like aperture, before i put the machine to sleep it appears to wake the external monitor up without a problem. If i shut all programs or leave basic things open like safari and mail which don't require the dedicated graphics, then upon wake it wont register an external screen is connected.
Manually detecting displays in settings doesn't work.
Disconnecting and reconnecting mini display port doesn't work.
Turning off power to cinema display and powering back up doesn't work.
To get the display going again its either 1) turn off macbook pro and re-boot or 2) re-start the machine then the display is automatically recognised. Or 3) launch a programme that kicks in dedicated graphics then manually go in and detect displays again..... like magic the display then springs to life.
No ideas anyone??

DNS Forwarding Same Internal and External Zone

Hi,<o:p></o:p>
So we have decided that we want our internal domain to be the same as our external domain e.g. domain.uk. I understand that split DNS can be used
to fulfil this requirement but is it possible to set up a forward so if the DNS entry is not available in the internal zone it will forward onto one of our external name servers where it can resolve?<o:p></o:p>
We are basically trying to avoid having to add the entry on both external and internal DNS servers for it to resolve. So far I have added the external name servers to
the forwarders and disabled root hints which didn’t work. I’ve tried to add a conditional forwarder but it says the zone already exists. It seems the only to achieve the internal resolution is by creating the DNS entry both internally and externally.<o:p></o:p>
Does anyone know if this is the case? It seems strange that you couldn’t point the DNS to another external name server for resolution? <o:p></o:p>
Any help would be appreciated.<o:p></o:p>

You must ask in networking forum
https://social.technet.microsoft.com/Forums/en-US/home?forum=winserverNIS&filter=alltypes&sort=lastpostdesc

Delivery report shows status of Pending for external address. Email sent to both internal and external addresses.

We have an Exchange 2013 on-premise server and seem to have an issue with emails sent to internal and external users at the same time.
The issue came to light because someone sent an email to 44 recipients, of which one was internal. None of the external recipients received the email. I checked the delivery report in the EAC and found the internal email marked as 'Delivered' and all of
the external ones marked as 'Pending'. I checked the queues and there were none. I did some testing and sent an email to just one of the external addresses on the list, it arrived. I tried sending the email again to all of the recipients, the external ones
all showed 'Pending'. I tried it again, but this time excluded the internal email address and all of the 43 external emails were immediately delivered.
So it seems that the issue only arises when we are sending to both internal and external addresses.
I then tried a test email to one internal address and one external address. The Delivery report says that the internal address was delivered immediately, while the external address is 'Pending' and gives more information saying: 'Message delivery is taking
longer than expected. There may be system delays. For more information, contact your helpdesk.'. To add further mystery to this, the email was actually delivered.
So, I have two concerns:
First is seems that some emails sent both internally and externally are only arriving internally. This is a huge problem because I don't know how many have been affected. There may be many lost emails we don't know about.
Second, it looks like I can't trust the delivery report. It says pending for some emails which didn't arrive, but it also says pending for some which did arrive. That is no good at all.
For info the server is running Windows Server 2012. I have run a Microsoft Update to check if there are any to apply and the only Exchange one is a spam filter update, which I doubt has any bearing but I will apply when I get chance.

Hi Neil,
According to the description, I find a related KB on Exchange 2010:
https://support.microsoft.com/kb/2694474?wa=wsignin1.0
It has the similar situation as yours.
This issue occurs because a function in a message tracking component tries to obtain the information for the recipient instead of the external recipient.
Please try to upgrade to the latest Exchange update to check whether this issue can be solved.
Also please check whether Throttling has been set.
Please run "Get-TransportService | fl" to check the MaxOutboundConnections parameter value.
More details to see:
Message throttling
http://technet.microsoft.com/en-us/library/bb232205(v=exchg.150).aspx
Thanks
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

Can I split my itunes music library between and internal and external hard drive?

Is it possible to have music on the two different drives and still be able to make playlists from both drives to put on my ipod? Here's my situation: I'm using a Dell 32 bit computer running Vista Home Premium SP2 which I share with other users. I have a large itunes library (40g+ of music only) that's starting to hog the hard disk space from other users. If possible, I would like to split off part of my itunes library to an external hard drive while still having access to the entire library for my ipod. Ideally I would like to have all my downloaded songs on both the internal and external drives so I'll have backups in case a drive fails, while putting all the music I have hard copies of solely on the external drive. Any help on how this can be done would be appreciated.

If you manually manage your itues library, you can store parts of it on an external drive, or on an internal drive. Just keep in mind that in iTunes that you must set a default location for iTunes to manage it's files, and that will be the default location for iTunes to store anything it downloads. You would need to manuay manage moving things from there if tht is not where you want them stored.
Perhaps a "better" solution would be for you to invest a little mone into 2 external drives. One to hold your entire iTunes library, and the second to be your off-line backup of the first. This is the method I have gone with and I like how it works for me. My entire iTunes library is on an external (portable) 320GB drive. Then, when iTunes is not running, I will clone my external drive onto a second drive I happen to have, this way if I have any failure of my primary drive, I lose at most about a weeks worth of content. For me, I purchase little content during a week, but I do move a fairly large volume of podcasts. With the entire library being on the external drive, if I ever have to swap to using my backup drive iTunes wil just think that it hasn't run and downloaded anything for a week, and all the "lost" content will be re-downloaded automatically. This won't work for apps or purchased content, but for subscribed podcasts, it is great.

How to use DataSource and External transaction in 9ias?

I'm working on a project that the application server needs to connect to over 100 databases.
I'd like to use connection pooling and external transaction service defined in OC4J's Datasources.
I wonder if anyone has an example of using datasource and external transaction service for OC4J.
Right now, I export toplink project to a java source and do the initialization there manually but I don't know how to use Datasource to get connections and how to use the external transaction service in the java code for OC4J.
I really appreciate you help.
Wei

Here is a fill in the blank example on how you could set this up through code:
Project project = new MyProject();
// alternatively, use the XMLProjectReader
server = project.createServerSession();
server.getLogin().useExternalConnectionPooling();
server.getLogin().setConnector(new JNDIConnector(new javax.naming.InitialContext(), "jdbc/DataSourceName"));
// the next line depends on the type of driver you want to use.
server.getLogin().useOracleThinJDBCDriver();
server.getLogin().useOracle();
server.getLogin().setUserName("username");
server.getLogin().setPassword("password");
server.getLogin().useExternalTransactionController();
server.setExternalTransactionController(new Oracle9iJTSExternalTransactionController());
server.logMessages();
server.login();

SharePoint 2013 - Office Web Apps - Internal and External Use

I have successfully installed SharePoint 2013 and Office Web Apps on Azure VMs inside an Azure Virtual Network (IaaS model). Everyting is working well. However, my testing has shown that external users and internal users can't use Office Web Apps at the
same time.
Office Web Apps, installed on its own vm, accomodates an external and internal URL quite well. However, SharePoint 2013 appears to only allow one setting for WOPI Zone, either internal or external but not both. I've set the WOPI zone to Internal-HTTPS (Set-SPWOPIZone
–Zone “internal-https”). OWA works just fine if accessed from inside the Azure Virtual Network. However, if I try to access from outside the Virtual Network, from the Internet, Office Web Apps fails. The exact oppisite is also true. I can set WOPI Zone to
External-HTTPS and accessing from the Internet works fine, but accessing inside the Virtual Network fails.
Am I missing something? I, obviously, want Office Webs Apps to function properly for both internal and external users simultaneously.
I appreciate any help anyone can provide here.
Glenn

Hi Glenn,
To have both the use of Internet and Internal available to your end-users, you first need to configure AAM setting. Open Central Administration > Application Management > Configure alternate access mappings. Let's say there is an existing web application
named http://sharepoint and my end-users from local network are able to access it using the URL http://sharepoint (root site collection). Here you need to add the Internet URL by select the web application and click Edit Public URLs. Add the Internet domain
to the web application, e.g http://sharepoint.abc.com. You don't necessarily have to edit binding setting in IIS. Before continuing next steps, make sure you are able to access http://sharepoint.abc.com from the Internet while being able to access http://sharepoint
from local network (aka Internal).
On the machine where Office Web App (OWA) Server 2013 is installed, open PowerShell to add OWA module and use the following command to re-create a new OWA server farm if you've completed configuring it previously.
New-OfficeWebAppsFarm -InternalUrl "http://owa" -ExternalUrl "http://owa.abc.com" -EditingEnabled.
In this case, I'm not using SSL certificate to encrypt data over the Internet. You can use Internet-public IP of the OWA server like -ExternalUrl "http://198.xxx.xxx.xx". Add CertifcateName parameter if you want to use whether CA-issued certificate
or self-signed certificate.
On your SharePoint machine, you need to re-bind all WFE machines to WAC farm using the cmdlet New-SPWOPIBinding. Next, you need to set the WOPI zone for both internal and external.
Set-SPWOPIZone -zone "external-http"
Note: I'm not all using certificate in my guidance. But the steps to have it configured is just to add more parameter.
I've recently successfully deployed OWA multi-server farm for both internal and internet uses for two big clients. In real-world scenario, ideally OWA should be published through firewall (Forefront UAG, TMG, F5...etc). Please let me know if you still have
issues after following my steps. My email: [email protected]
Regards,
-T.s
Thuan Soldier
A 23-year-old man loving Microsoft technologies and making crazy ideas on business journey.
SharePoint Vietnam |
Blog | Twitter

Error while trying to synchronize audio and MIDI. Sample rate 42804 recognized. Check conflict between Garageband and external device.

Sometimes, while playing back my software instrument songs, I get an intermittent pop-up error message, saying "Error while trying to synchronize audio and MIDI. Sample rate 42804 recognized. Check conflict between Garageband and external device."
(Sometimes the five digit number is different, but remains a five-digit number beginning with "4".)
Simultaneously, the song stops until I press the "Okay" button in the pop-up window.
When I continue to play the song, the sound is jerky and clipped, and the playhead doesn't keep up with the song, and then suddenly jumps to the part of the song currently being played.
There's also a sound of static.
The issue seems to occur whether or not I have my MIDI controller turned on and plugged into my desktop Imac.
Tony

Hello,
open your Audio MIDI Setup utility and set the input to 44100
https://discussions.apple.com/message/12710638#12710638

I have my Time Machine on an external drive (not connected to Airport Extreme) and I have an external HD attached to airport extreme. Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme. How?

I have my Time Machine on an external drive (not connected to Airport Extreme) and I have an external HD attached to airport extreme. Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme. How?

Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme.
Sorry, but no.
Time Machine will backup your Mac, but not the hard drive attached to the AirPort Extreme.
Time Machine will back up a hard drive only if it is attached directly to your Mac via USB or FireWire.

I am trying to gather all of my music into one place, but it is scattered throughout my computer and external hard drive, how can I put it all in one folder and then create one library off of it?

My first problem is that I need to get all of my music files in one folder, they are scattered throughout my computer and external hard drive and I am trying to get them all together. Afterwards I want to send this music to my microsd hard in my Samsung Galaxy s4, is there a way to proceed through this? Or at least one part of it?

Consolidate your iTunes Library
As for the other part of the question, iTunes syncs with Apple devices.
Simply copy the media desired from the computer to the microSD card. This has nothing to do with iTunes.

Front End internal and external web services

Hi all,
Can someone explain the purpose of internal and external web services URL in front end server. what does it do and what is it used for? and why the external traffic goes directly to it and not through reverse proxy?
Thanks,

They're for multiple purposes. Address books, autodiscovery, meeting urls, mobile clients, etc. There are two because they respond slightly differently based on whether the client is internal or external. External traffic should always reach
it through a reverse proxy, that reverse proxy should proxy traffic received on port 443 to port 4443 on your front end pool.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Viewer and External Monitor doesn't playback at same time

When watching clips in the viewer window, they playback fine. But on my external monitor, it only shows the first frame from when it's played. when I stop playback, the external monitor then shows the last frame the Viewer window is stopped on. How can I fix it so that the viewer and external monitor playback the clip at the same time?
At the moment we're digitizing footage with the Offline RT Photo JPEG codec set to 75% quality.
A few days ago we were digitizing footage at 35% quality and that footage plays back fine. We moved to 75% quality at the editor's request. A few days ago we had created a few sample 75% quality tests for the editor to view. I loaded those clips into Final Cut right now and they playback fine as well. So it's all of a sudden just these new clips created yesterday :S.
Message was edited by: Phillip Roh

Yes.
Forgot to mention that the timeline plays all the footage back properly on both the canvas window and the external monitor. Sorry for not mentioning that sooner.
More discoveries! The playback 'freeze' only happens if I open a clip from the browser into the viewer. If I open a clip from the timeline into the viewer, it plays-back fine!
Message was edited by: Phillip Roh

How to configure AD on windows 2012 server for Exchange 2013 internal and external email flow

Dear Experts,
I have to configure exchange 2013 on Windows server 2012 STD. Company has registered Static IP addresses and can get the MX record pointing to any of this Static IP.
The registered domain name is e.g. contoso.com.
a. What should I use as domain name on AD? contoso.com or contoso.local
b. Is it recommended to have two different servers for AD and Exchange?
c. What should be my connector settings for mail flow?
d. how can I set 2 email servers in company for load balancing?

Hi,
a, I suggest use contoso.com as domain name. It is convenient to add urls into our certificate for internal and external mail flow.
b, Recommended that installing AD
and Exchange Server on two separate
Servers. If Exchange Server downed unfortunately, it can prevent AD server from crushing at the same time.
c, Found some articles for your reference:
Configure Mail Flow and Client Access
http://technet.microsoft.com/en-us/library/jj218640(v=exchg.150).aspx
Configuring Outbound Mail Flow in Exchange Server 2013
http://exchangeserverpro.com/configuring-outbound-mail-flow-in-exchange-server-2013/
d, Load Balancing
http://technet.microsoft.com/en-us/library/jj898588(v=exchg.150).aspx
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

OS X and External HD

Similar Messages

Maybe you are looking for