Os X Server 10.6.5 Server Admin iChat not Editable

Hello All,
I upgraded my server to the most recent release 10.6.5. Previously my Ichat (or so I thought) was set correctly and we modifiable in Server Admin. ONce I updated all fields are greyed out and un-editable. I tried to reinitialize the plist with the PlistBuddy option suggested in this forum with no success.
Here is the output to changeip -checkhostname
bash-3.2$ sudo changeip -checkhostname
Password:
Primary address = 192.168.1.210
Current HostName = appleXserver.local
The DNS hostname is not available, please repair DNS and re-run this tool.
dirserv:success = "success"
This is obviously wrong. appleXerver.local is the local name of the server. This was working before the update. In server admin it shows that 192.168.1.210 resolves to server.679ave.com. (FDNQ) as it should.
The name server that the primary zone 679ave.com. points to is dns.679ave.com.
Any suggestions? Why did this change (did I have a bug to begin with?).

ok figured out the dns problem...looks like in the system preferences the dns wasn't setup after the update. now sudo changeip -checkhostname gives
bash-3.2$ sudo changeip -checkhostname
Password:
Primary address = 192.168.1.210
Current HostName = server.679ave.com
DNS HostName = server.679ave.com
The names match. There is nothing to change.
dirserv:success = "success"
bash-3.2$
now sudo serveradmin settings jabber gives
bash-3.2$ sudo serveradmin settings jabber
Password:
jabber:s2sRestrictDomains = no
jabber:authLevel = "ANYMETHOD"
jabber:savedChatsLocation = "/var/jabberd/message_archives"
jabber:dataLocation = ""
jabber:enableAutoBuddy = yes
jabber:enableXMPP = yes
jabber:sslKeyFile = "/etc/certificates/server.679ave.com.7C3ACC0386ADFDE3A70C53C861BFA1BC85281421.c oncat.pem"
jabber:initialized = yes
jabber:logLevel = "ALL"
jabber:sslCAFile = "/etc/certificates/server.679ave.com.7C3ACC0386ADFDE3A70C53C861BFA1BC85281421.c hain.pem"
jabber:requireSecureS2S = no
jabber:serviceMode = "ALL"
jabber:savedChatsArchiveInterval = 7
jabber:jabberdDatabasePath = "/private/var/jabberd/sqlite/jabberd2.db"
jabber:hosts:arrayindex:0 = "server.679ave.com"
jabber:eventLogArchiveInterval = 7
jabber:enableSavedChats = yes
jabber:s2sAllowedDomains = emptyarray
bash-3.2$
My ichat is now up and running again too!
Message was edited by: darnelld

Similar Messages

  • Java.lang.Exception: User : principals=[admin] is not allowed to shutdown the server

    Hi,
    When i shut down my managed and admin servers through the console i am getting
    the following exception.Any one have an idea on this?
    Exception :
    java.lang.Exception: User : principals=[admin] is not allowed to shutdown the
    server.
         at weblogic.server.ServerLifeCycleRuntime.shutdown(ServerLifeCycleRuntime.java:299)
         at java.lang.reflect.Method.invoke(Native Method)
         at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:750)
         at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:732)
         at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
         at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
         at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:928)
         at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:472)
         at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:200)
         at $Proxy105.shutdown(Unknown Source)
         at java.lang.reflect.Method.invoke(Native Method)
         at weblogic.management.console.actions.mbean.DoMBeanOperationAction.performOnSingle(DoMBeanOperationAction.java:206)
         at weblogic.management.console.actions.mbean.DoMBeanOperationAction.perform(DoMBeanOperationAction.java:188)
         at weblogic.management.console.actions.internal.ActionServlet.doAction(ActionServlet.java:171)
         at weblogic.management.console.actions.internal.ActionServlet.doPost(ActionServlet.java:85)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1075)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:418)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:306)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5517)
         at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:685)
         at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3156)
         at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2506)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:234)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:210)

    I have the exact same problem. It is for a WLI 7.0 SP-5 domain. I started admin and managed servers using the startWeblogic and startManagedWebLogic scripts, but trying to stop them from the console is throwing this exception:
    java.lang.Exception: User : principals=[admin] is not allowed to shutdown the server.
         at weblogic.server.ServerLifeCycleRuntime.shutdown(ServerLifeCycleRuntime.java:299)
         at java.lang.reflect.Method.invoke(Native Method)
         at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:736)
         at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:718)
         at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
         at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
         at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:1107)
         at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:472)
         at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:200)
         at $Proxy105.shutdown(Unknown Source)
         at java.lang.reflect.Method.invoke(Native Method)
         at weblogic.management.console.actions.mbean.DoMBeanOperationAction.performOnSingle(DoMBeanOperationAction.java:206)
         at weblogic.management.console.actions.mbean.DoMBeanOperationAction.perform(DoMBeanOperationAction.java:188)
         at weblogic.management.console.actions.internal.ActionServlet.doAction(ActionServlet.java:171)
         at weblogic.management.console.actions.internal.ActionServlet.doPost(ActionServlet.java:85)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1094)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:437)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:319)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5626)
         at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:685)
         at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3213)
         at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2555)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:251)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:219)
    I upgraded from WLI7.0 SP-1 to SP-5, and since then I am getting this error.
    Please help!

  • Stop managed server without node manager and admin server

    What are the commonly used ways to stop managed Weblogic server without node manager running and without administration server running?
    (I have only one solution: on the managed server startup dump process ID to a file, and then when I want to stop it, send a signal to this process ID and kill JVM. But it seems not very clean way.)
    (The managed server is started when both node manager and admin server are down, and I provide boot.properties of admin server to the managed server to start.)
    UPDATED: And I don't want to start neither admin server, nor node manager even temporarily.
    Edited by: user12163080 on Jun 24, 2010 4:40 AM

    Hai,
    I read the Oracle weblogic wlst script document without Admin server you cannot connect the managed server through the WLST script. see the below lines
    "The start command starts Managed Servers or clusters in a domain using Node Manager.
    To use the start command, WLST must be connected to a running Administration Server.
    To start Managed Servers without requiring a running Administration Server, use the
    nmStart command with WLST connected to Node Manager."
    "You shut down a server to which WLST is connected by entering the shutdown command
    without any arguments.
    When connected to a Managed Server instance, you only use the shutdown command to shut
    down the Managed Server instance to which WLST is connected; you cannot shut down another
    server while connected to a Managed Server instance.
    WLST uses Node Manager to shut down a Managed Server. When shutting down a Managed
    Server, Node Manager must be running.
    In the event of an error, the command returns"
    They are two option if you are using adminserver then we can stop the any Managed server.
    The option is if you are using the nodemanager without admin server we can stop the any Managed server.
    The last final solution to kill the particular Managed server pid.
    Regards,
    S.vinoth babu

  • I am unable to see following SQL Server Analysis Services in central admin services after the SQL 2014 power pivot installations

    I am unable to see following SQL Server Analysis Services  in central admin services after the SQL 2014 power pivot installations
    Ravi

    Hi Ravi,
    Per my knowledge, there is no Analysis Service in SharePoint.
    After running the SQL 2014 setup to install PowerPivot for SharePoint, you need to open the PowerPivot for SharePoint 2013 Configuration tool in Central Admin Server and configure PowerPivot for SharePoint.
    After that, you will see new Service Application called "Default PowerPivot Service Application" in Central Administration.
    If you have other WFE servers, then you need to install the PowerPivot Add-In on all the other servers in the SharePoint farm.
    More references:
    http://sridharbabuk.blogspot.jp/2013/02/installing-configuring-analysis-service.html
    http://msdn.microsoft.com/en-us/library/jj219067.aspx
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Can't start manager server on other machine from admin console

    hi, m fredzh
    i have weblogic 10.3.2 where i created a cluster named cluster1 on production mode
    the machines and servers list as follow:
    cluster1 192.168.1.100
    --machine1
    --server1 192.168.1.100
    --machine2
    -server2 192.168.1.101
    i create nodemanager on machine2, and set the type as ssl, the listener address 192.168.1.101,
    then login on 192.168.1.101, and run wlst.sh , nmEnroll and then start startNodemanaged.sh ..
    start server2 on the admin console(on 192.168.1.100), failed and the log as follow:
    can anbody help me, thank you..
    ==============================================================================
    <Critical> <WebLogicServer> <localhost.localdomain> <managerServer2> <main> <<WLS Kernel>> <> <> <1286788326928> <BEA-000386> <Server subsystem failed. Reason: java.lang.AssertionError: java.lang.reflect.InvocationTargetException
    java.lang.AssertionError: java.lang.reflect.InvocationTargetException
    at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy._invokeServiceMethod(DescriptorManager.java:175)
    at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy.decrypt(DescriptorManager.java:192)
    at weblogic.descriptor.DescriptorManager$SecurityServiceImpl.decrypt(DescriptorManager.java:114)
    at weblogic.descriptor.internal.AbstractDescriptorBean._decrypt(AbstractDescriptorBean.java:991)
    at weblogic.management.configuration.SecurityConfigurationMBeanImpl.getCredential(SecurityConfigurationMBeanImpl.java:709)
    at weblogic.security.internal.ServerPrincipalValidatorImpl.getSecret(ServerPrincipalValidatorImpl.java:88)
    at weblogic.security.internal.ServerPrincipalValidatorImpl.sign(ServerPrincipalValidatorImpl.java:67)
    at weblogic.security.service.PrivilegedActions$SignPrincipalAction.run(PrivilegedActions.java:62)
    at java.security.AccessController.doPrivileged(Native Method)
    at weblogic.security.service.SecurityServiceManager.createServerID(SecurityServiceManager.java:1098)
    at weblogic.security.service.SecurityServiceManager.getServerID(SecurityServiceManager.java:1111)
    at weblogic.security.service.SecurityServiceManager.sendASToWire(SecurityServiceManager.java:602)
    at weblogic.server.channels.ChannelService.resetQOS(ChannelService.java:284)
    at weblogic.server.channels.ChannelService.start(ChannelService.java:250)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused By: java.lang.reflect.InvocationTargetException
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy._invokeServiceMethod(DescriptorManager.java:173)
    at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy.decrypt(DescriptorManager.java:192)
    at weblogic.descriptor.DescriptorManager$SecurityServiceImpl.decrypt(DescriptorManager.java:114)
    at weblogic.descriptor.internal.AbstractDescriptorBean._decrypt(AbstractDescriptorBean.java:991)
    at weblogic.management.configuration.SecurityConfigurationMBeanImpl.getCredential(SecurityConfigurationMBeanImpl.java:709)
    at weblogic.security.internal.ServerPrincipalValidatorImpl.getSecret(ServerPrincipalValidatorImpl.java:88)
    at weblogic.security.internal.ServerPrincipalValidatorImpl.sign(ServerPrincipalValidatorImpl.java:67)
    at weblogic.security.service.PrivilegedActions$SignPrincipalAction.run(PrivilegedActions.java:62)
    at java.security.AccessController.doPrivileged(Native Method)
    at weblogic.security.service.SecurityServiceManager.createServerID(SecurityServiceManager.java:1098)
    at weblogic.security.service.SecurityServiceManager.getServerID(SecurityServiceManager.java:1111)
    at weblogic.security.service.SecurityServiceManager.sendASToWire(SecurityServiceManager.java:602)
    at weblogic.server.channels.ChannelService.resetQOS(ChannelService.java:284)
    at weblogic.server.channels.ChannelService.start(ChannelService.java:250)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused By: weblogic.security.internal.encryption.EncryptionServiceException: com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte.
    at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptBytes(JSafeEncryptionServiceImpl.java:125)
    at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptString(JSafeEncryptionServiceImpl.java:173)
    at weblogic.security.internal.encryption.ClearOrEncryptedService.decrypt(ClearOrEncryptedService.java:96)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy._invokeServiceMethod(DescriptorManager.java:173)
    at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy.decrypt(DescriptorManager.java:192)
    at weblogic.descriptor.DescriptorManager$SecurityServiceImpl.decrypt(DescriptorManager.java:114)
    at weblogic.descriptor.internal.AbstractDescriptorBean._decrypt(AbstractDescriptorBean.java:991)
    at weblogic.management.configuration.SecurityConfigurationMBeanImpl.getCredential(SecurityConfigurationMBeanImpl.java:709)
    at weblogic.security.internal.ServerPrincipalValidatorImpl.getSecret(ServerPrincipalValidatorImpl.java:88)
    at weblogic.security.internal.ServerPrincipalValidatorImpl.sign(ServerPrincipalValidatorImpl.java:67)
    at weblogic.security.service.PrivilegedActions$SignPrincipalAction.run(PrivilegedActions.java:62)
    at java.security.AccessController.doPrivileged(Native Method)
    at weblogic.security.service.SecurityServiceManager.createServerID(SecurityServiceManager.java:1098)
    at weblogic.security.service.SecurityServiceManager.getServerID(SecurityServiceManager.java:1111)
    at weblogic.security.service.SecurityServiceManager.sendASToWire(SecurityServiceManager.java:602)
    at weblogic.server.channels.ChannelService.resetQOS(ChannelService.java:284)
    at weblogic.server.channels.ChannelService.start(ChannelService.java:250)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Edited by: fredzh on 2010-10-12 下午6:54

    hi,Jay
    i followed the steps as follow:
    1、change prod mode to dev
    2、modified the config.xml entrys on the all two servers:
    <node-manager-password-encrypted>test</node-manager-password-encrypted>
    <credential-encrypted>test</credential-encrypted>
    <embedded-ldap>
    <name>cluster_domain</name>
    <credential-encrypted>test</credential-encrypted>
    </embedded-ldap>
    3、enrolled the node, then started the two adminservers, started server2's nodemanager..server2 can be started from the cluster admin console.
    4、change the dev mode to prod mode on admin console, it failed throw error:
    "in production mode, it's not allowed to set a clear text value to the property: CredentialEncrypted of SecurityConfigurationMBean"
    i checked the config.xml ,the entrys i had changed were not aotomatically encrypted,may i manually encryp the clear text value? ..follow is the config.xml :
    <?xml version='1.0' encoding='UTF-8'?>
    <domain xmlns="http://xmlns.oracle.com/weblogic/domain" xmlns:sec="http://xmlns.oracle.com/weblogic/security" xmlns:wls="http://xmlns.oracle.com/weblogic/security/wls" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/weblogic/security/xacml http://xmlns.oracle.com/weblogic/security/xacml/1.0/xacml.xsd http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator/1.0/passwordvalidator.xsd http://xmlns.oracle.com/weblogic/domain http://xmlns.oracle.com/weblogic/1.0/domain.xsd http://xmlns.oracle.com/weblogic/security http://xmlns.oracle.com/weblogic/1.0/security.xsd http://xmlns.oracle.com/weblogic/security/wls http://xmlns.oracle.com/weblogic/security/wls/1.0/wls.xsd">
    <name>cluster_domain</name>
    <domain-version>10.3.2.0</domain-version>
    <security-configuration>
    <name>cluster_domain</name>
    <realm>
    <sec:authentication-provider xsi:type="wls:default-authenticatorType"></sec:authentication-provider>
    <sec:authentication-provider xsi:type="wls:default-identity-asserterType">
    <sec:active-type>AuthenticatedUser</sec:active-type>
    </sec:authentication-provider>
    <sec:role-mapper xmlns:xac="http://xmlns.oracle.com/weblogic/security/xacml" xsi:type="xac:xacml-role-mapperType"></sec:role-mapper>
    <sec:authorizer xmlns:xac="http://xmlns.oracle.com/weblogic/security/xacml" xsi:type="xac:xacml-authorizerType"></sec:authorizer>
    <sec:adjudicator xsi:type="wls:default-adjudicatorType"></sec:adjudicator>
    <sec:credential-mapper xsi:type="wls:default-credential-mapperType"></sec:credential-mapper>
    <sec:cert-path-provider xsi:type="wls:web-logic-cert-path-providerType"></sec:cert-path-provider>
    <sec:cert-path-builder>WebLogicCertPathProvider</sec:cert-path-builder>
    <sec:name>myrealm</sec:name>
    <sec:password-validator xmlns:pas="http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator" xsi:type="pas:system-password-validatorType">
    <sec:name>SystemPasswordValidator</sec:name>
    <pas:min-password-length>8</pas:min-password-length>
    <pas:min-numeric-or-special-characters>1</pas:min-numeric-or-special-characters>
    </sec:password-validator>
    </realm>
    <default-realm>myrealm</default-realm>
    <anonymous-admin-lookup-enabled>false</anonymous-admin-lookup-enabled>
    <credential-encrypted>test</credential-encrypted>
    <web-app-files-case-insensitive>false</web-app-files-case-insensitive>
    <compatibility-connection-filters-enabled>false</compatibility-connection-filters-enabled>
    <node-manager-username>weblogic</node-manager-username>
    <node-manager-password-encrypted>test</node-manager-password-encrypted>
    <principal-equals-case-insensitive>false</principal-equals-case-insensitive>
    <principal-equals-compare-dn-and-guid>false</principal-equals-compare-dn-and-guid>
    <downgrade-untrusted-principals>false</downgrade-untrusted-principals>
    <enforce-strict-url-pattern>true</enforce-strict-url-pattern>
    <cross-domain-security-enabled>false</cross-domain-security-enabled>
    </security-configuration>
    <jta>
    <security-interop-mode>default</security-interop-mode>
    </jta>
    <server>
    <name>AdminServer</name>
    <ssl>
    <hostname-verifier xsi:nil="true"></hostname-verifier>
    <hostname-verification-ignored>true</hostname-verification-ignored>
    <export-key-lifespan>500</export-key-lifespan>
    <client-certificate-enforced>false</client-certificate-enforced>
    <two-way-ssl-enabled>false</two-way-ssl-enabled>
    <ssl-rejection-logging-enabled>true</ssl-rejection-logging-enabled>
    <inbound-certificate-validation>BuiltinSSLValidationOnly</inbound-certificate-validation>
    <outbound-certificate-validation>BuiltinSSLValidationOnly</outbound-certificate-validation>
    <allow-unencrypted-null-cipher>false</allow-unencrypted-null-cipher>
    <use-server-certs>false</use-server-certs>
    </ssl>
    <listen-port>7110</listen-port>
    <listen-address></listen-address>
    </server>
    <server>
    <name>server2</name>
    <machine>machine2</machine>
    <listen-port>7110</listen-port>
    <listen-address>192.168.1.101</listen-address>
    <server-start>
    <java-vendor>Sun</java-vendor>
    <java-home>/opt/jdk1.6.0_21</java-home>
    <bea-home>/root/Oracle/Middleware</bea-home>
    <root-directory>/root/Oracle/Middleware/user_projects/domains/cluster_domain</root-directory>
    <username>weblogic</username>
    <password-encrypted>{AES}xhSI75AxXtXdMrCXRgA2uY5pfcxUGE9X4YXTjfe1XEY=</password-encrypted>
    </server-start>
    </server>
    <embedded-ldap>
    <name>cluster_domain</name>
    <credential-encrypted>test</credential-encrypted>
    </embedded-ldap>
    <configuration-version>10.3.2.0</configuration-version>
    <machine xsi:type="unix-machineType">
    <name>machine2</name>
    <node-manager>
    <nm-type>SSL</nm-type>
    <listen-address>192.168.1.101</listen-address>
    <listen-port>5556</listen-port>
    <debug-enabled>false</debug-enabled>
    </node-manager>
    </machine>
    <admin-server-name>AdminServer</admin-server-name>
    </domain>
    Edited by: fredzh on 2010-10-13 下午7:57

  • Discover server fail 3.1.1, ovs-agent-passwd = User admin does not exists

    Hello
    The discover Oracle Server 3.1.1 (fresh install) failed from Oracle VM manager 3.1.1 with the message :
    Job Internal Error (Operation)com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_4010E Attempt to send command: get_api_version to server: @IP failed. OVMAPI_4004E Server Failed Command: get_api_version , Status: org.apache.xmlrpc.client.XmlRpcHttpTransportException: HTTP server returned unexpected status: Unauthorized access attempt from ('@IP', 24259)!
    Then I tried to change agent password :
    ovs-agent-passwd oracle => success
    ovs-agent-passwd admin => fail ?!?
    Traceback (most recent call last):
    File "/usr/sbin/ovs-agent-passwd", line 71, in ?
    main()
    File "/usr/sbin/ovs-agent-passwd", line 60, in main
    raise Exception('User %s does not exists.' % username)
    Exception: User admin does not exists.
    Voran
    Edited by: Voran on Nov 9, 2012 7:35 AM

    Server can be discovered after reinstall Oracle VM Server 3.1.1, so it was issue with password agent.
    But then, how to change password of the agent, since ovs-agent-passwd don't work for admin user ?
    Thanks for your help :)
    Voran

  • [Mac OS X 10.4.9] Server Admin Can NOT manage localhost

    a.t.t
    first i delete the X509Anchors And X509Certificates
    then i found that SERVER ADMIN app Cannot Manage the LOCALHOST
    it said:
    ==========
    There is no server available at the address ou entered
    All services failed to aceess the address you provides for QTSS.local
    Check the address and try to log on again or contact your network administrator
    [keep server in list] [remove server from list]
    ==========
    how can i use SERVER ADMIN again?
    Thanks

    Hi, and a warm welcome to the forums!
    No Server expert here, but I'm fairly certain you must replace those 2 files with copies from elsewhere.

  • Admin Server conole for managed Server

    I have one question regarding weblogic server 10.3 If the Admin Server is Not avilable can we make the consoleApp Deployed on the AdminServer make it avialable on the Managed Servers?
    If that is possible then please let me know the steps how to do?
    any suggestions would be appreciated

    Hi Eden,
    <b><font color=maroon> Without having an AdminServer if we are able to make changes then Actually there is No Need of an admin Server at all</font></b>
    "consoleapp" is the application which is called as Admin Console application which gets automatically (Internally) deployed on the Admin Server Only... So if the AdminServer is down then u don't have any option to access the AdminConsole.
    If your ManagedServers are running on MSI Mode (ManagedServer Independence mode ...Means Without AdminServer Running) It means those Managed Servers are using the Old Configuration files which the Admin Server has created when it was last booted.
    Still if you want to make some configuration changes then you can try editing the *"config.xml"* and *"msi-config.xml"* (msi-config.xml file u need to edit only if you are starting your ManagedServers using NodeManager) file manually in each Managed Server Box. But that is not a recommended way....Afterwards u need to restart your ManagedServers.
    NOTE If you will explicitly try to deploy the "consoleapp" to any of the ManagedServer then you will get the following Error: (where localhost:7001 is the AdminServer URL)
    <font color=maroon>
    <Aug 27, 2010 9:34:44 PM IST> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'consoleapp' due to error weblogic.management.DeploymentException: Exception occured while downloading files.
    weblogic.management.DeploymentException: Exception occured while downloading files
    at weblogic.deploy.internal.targetserver.datamanagement.AppDataUpdate.doDownload(AppDataUpdate.java:43)
    at weblogic.deploy.internal.targetserver.datamanagement.DataUpdate.download(DataUpdate.java:56)
    at weblogic.deploy.internal.targetserver.datamanagement.Data.prepareDataUpdate(Data.java:97)
    at weblogic.deploy.internal.targetserver.BasicDeployment.prepareDataUpdate(BasicDeployment.java:682)
    at weblogic.deploy.internal.targetserver.BasicDeployment.stageFilesForStatic(BasicDeployment.java:725)
    Truncated. see log file for complete stacktrace
    java.net.ConnectException: Tried all: '1' addresses, but could not connect over HTTP to server: 'localhost', port: '7001'
    at weblogic.net.http.HttpClient.openServer(HttpClient.java:312)
    at weblogic.net.http.HttpClient.openServer(HttpClient.java:388)
    at weblogic.net.http.HttpClient.New(HttpClient.java:238)
    at weblogic.net.http.HttpURLConnection.connect(HttpURLConnection.java:172)
    at weblogic.deploy.service.datatransferhandlers.HttpDataTransferHandler.getDataAsStream(HttpDataTransferHandler.java:75)
    Truncated. see log file for complete stacktrace
    </font>
    Thanks
    Jay SenSharma
    http://weblogic-wonders.com/weblogic (WebLogic Wonders Are Here)

  • Server admin can not connect to server

    My 10.6.8 Mac Mini server decided that no user defined in the Workgroup manager should be allowed to connect to the server using Server Admin.
    Not root, not admin, not myself although I have admin privileges.
    What would be the proper way to fix this?
    Tia
    Hans

    My 10.6.8 Mac Mini server decided that no user defined in the Workgroup manager should be allowed to connect to the server using Server Admin.
    Not root, not admin, not myself although I have admin privileges.
    What would be the proper way to fix this?
    Tia
    Hans

  • ORA-28547: connection to server failed, probable Oracle Net admin error

    Hi Gurus
    I can't get the gateway to work? I'm running on AIX. Any suggestions are appreciated.
    listener.ora
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1522))
    # (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1522))
    SID_LIST_LISTENER=
    (SID_LIST=
    (SID_DESC=
    (SID_NAME=dg4msql)
    (ORACLE_HOME=/oracle/rcsr/base/product/11.2.0/gateway)
    (PROGRAM=dg4msql)
    tnsnames.ora
    dg4msql =
    (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1522))
    (CONNECT_DATA=(SID=dg4msql))
    (HS=OK)
    sqlnet.ora
    SQL_AUTHENTICATION_SERVICES = (NONE)
    NAMES.DIRECTORY_PATH= (TNSNAMES)
    ADR_BASE = /oracle/rcsr/base
    initdg4msql.ora
    HS_FDS_CONNECT_INFO=142.178.205.42:1433//komodo
    # alternate connect format is hostname/serverinstance/databasename
    HS_FDS_TRACE_LEVEL=debug
    HS_FDS_RECOVERY_ACCOUNT=RECOVER
    HS_FDS_RECOVERY_PWD=RECOVER
    $ lsnrctl status
    LSNRCTL for IBM/AIX RISC System/6000: Version 11.2.0.1.0 - Production on 03-MAY-2013 13:48:01
    Copyright (c) 1991, 2009, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1522)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for IBM/AIX RISC System/6000: Version 11.2.0.1.0 - Production
    Start Date 03-MAY-2013 13:38:14
    Uptime 0 days 0 hr. 9 min. 47 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP ON
    Listener Parameter File /oracle/rcsr/base/product/11.2.0/gateway/network/admin/listener.ora
    Listener Log File /oracle/rcsr/base/diag/tnslsnr/abe-rcsr-01/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1522)))
    Services Summary...
    Service "dg4msql" has 1 instance(s).
    Instance "dg4msql", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    $ tnsping dg4msql
    TNS Ping Utility for IBM/AIX RISC System/6000: Version 11.2.0.1.0 - Production on 03-MAY-2013 13:48:53
    Copyright (c) 1997, 2009, Oracle. All rights reserved.
    Used parameter files:
    /oracle/rcsr/base/product/11.2.0/gateway/network/admin/sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1522)) (CONNECT_DATA=(SID=dg4msql)) (HS=OK))
    OK (0 msec)
    $ sqlplus aa/aa@dg4msql
    SQL*Plus: Release 11.2.0.1.0 Production on Fri May 3 13:49:52 2013
    Copyright (c) 1982, 2009, Oracle. All rights reserved.
    ERROR:
    ORA-28547: connection to server failed, probable Oracle Net admin error

    You can't directly use the gateway - you can only access a gateway using a database link.
    So this won't work:
    $ sqlplus aa/aa@dg4msql
    You need to connect to your Oracle database (for example as sysdba) and create a (public) database link:
    create [public] database link dg4msql connect to "<MS SQl Server username! identified by "<MS SQl Server password>" using 'dg4msql;
    Once you create the database link you can now access the MS SQl Server tables:
    select * from "your MS SQL Server table"@dg4msql;

  • Server admin could not connect to localhost

    Hi,
    the Problem I have is that I could not connect to the server at localhost. Server admin shows connection error.
    Maybe it is a problem with my certificate state. I have deleted the default one and have to recertificate my own one.
    Any ideas?

    Others have posted in the past that the SA or WGM has 'issues' when the default cert is blown away.
    Have you considered doing a clean install on another volume, then move the default from that install back into your current one? Just an idea before I've had my first coffee.

  • Setting up an admin server (win) + a managed server (linux)

    I am trying to set up the following domain on weblogic 8.1 SP2:
    1. An administration server (+workshop) on my local Windows box
    2. A managed server running on a red hat enterprise box, that connects to the
    administration server on my windows box.
    I've not been able to find any documentation on this, and the installation process
    is far from intuitive.
    Can someone help me with a step-by-step guide? I'm not trying to do anything fancy
    here ;-) Thanks!

    Resolution found:
    Went through the config.xml file. Found that in the server tag the listen address
    for the server and managed server is not there. Entered the Corresponding listen
    address for both Admin and Managed server
    "Henrik Pettersen" <[email protected]> wrote:
    >
    >
    >
    Thank you for the information. Just what I needed. But I am now encountering
    another
    problem when I try to startManagedWebLogic:
    <03-Jun-2004 16:48:03 o'clock BST> <Info> <Configuration Management>
    <BEA-150015>
    <Connecting to the administration server http://banana:7001 to retrieve
    the initial
    configuration.>
    <03-Jun-2004 16:48:06 o'clock BST> <Notice> <Log Management> <BEA-170019>
    <The
    server log file /usr/local/bea/user_projects/domains/domain/managed/managed.log
    is opened. All server side log events will be written to this file.>
    <03-Jun-2004 16:48:06 o'clock BST> <Emergency> <Configuration Management>
    <BEA-150011>
    <There was an attempt to start a managed server ( null:7001 ) using the
    same address
    as the admin server ( banana:7001 ).>
    <03-Jun-2004 16:48:06 o'clock BST> <Emergency> <WebLogicServer> <BEA-000342>
    <Unable
    to initialize the server: weblogic.management.configuration.ConfigurationException:
    [Configuration Management:150011]There was an attempt to start a managed
    server
    ( null:7001 ) using the same address as the admin server ( banana:7001
    ).>
    The WebLogic Server did not start up properly.
    Exception raised: 'weblogic.management.configuration.ConfigurationException:
    [Configuration
    Management:150011]There was an attempt to start a managed server ( null:7001
    using the same address as the admin server ( banana:7001 ).'
    Reason: weblogic.management.configuration.ConfigurationException: [Configuration
    Management:150011]There was an attempt to start a managed server ( null:7001
    using the same address as the admin server ( banana:7001 ).
    I am trying to run Weblogic 8.1 Portal Domain on Red Hat Enterprise 3.
    The Linux config file is attached. Any clues would be most appreciated.
    Thank you for your help.
    Henrik
    "Michael Zanchelli" <[email protected]> wrote:
    Involving multiple machines obviously adds some complexity but for a
    development
    environment that you describe, you'll want to use the ConfigurationWizard
    to
    create domains (with the same name) on both machines. On the admin server
    machine,
    use the Custom path in Config Wiz to add the managed server, and onthe
    managed
    server machine, you can use Express mode. Start the admin server, then
    use startManagedWeblogic
    on the managed server machine, specifying the managed server name and
    admin url
    as command line args.
    In a production environment, you'll likely use node manager to start
    managed servers
    and a domain does not need to be created on the managed server machine
    in that
    case.
    edocs has lots of good overview information and details on using Config
    Wiz.
    "Henrik" <[email protected]> wrote:
    I am trying to set up the following domain on weblogic 8.1 SP2:
    1. An administration server (+workshop) on my local Windows box
    2. A managed server running on a red hat enterprise box, that connects
    to the
    administration server on my windows box.
    I've not been able to find any documentation on this, and the installation
    process
    is far from intuitive.
    Can someone help me with a step-by-step guide? I'm not trying to doanything
    fancy
    here ;-) Thanks!

  • How to start managed server on Weblogic 9.1 Admin console with jRockit

    I configured a new 9.1 domain with jRockit as the JVM. Under Server Start, I used -server -Xgcprio:pausetime -Xpausetarget=400ms -Xms:256m -Xmx:384m -Xns:81m -Xgcpause in the Argument field. When I tried to start the server, I am getting the following error:
    <May 24, 2006 11:16:55 AM> <Info> <NodeManager> <Starting WebLogic server with command line: C:\bea\jrockit90_150_04\bin\java -Dweblogic.Name=jdevext -Dbea.home=C:\bea -Djava.security.policy=c:\bea\weblogic91\server\lib\weblogic.policy -Dweblogic.management.server=http://144.111.155.145:7001 -Djava.library.path=C:\bea\WEBLOG~1\server\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\bea\WEBLOG~1\server\native\win\32;C:\bea\WEBLOG~1\server\bin;C:\bea\JROCKI~1\jre\bin;C:\bea\JROCKI~1\bin;C:\bea\WEBLOG~1\server\native\win\32\oci920_8;C:\oracle\ora92\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\Program Files\ThinkPad\Utilities;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Support Tools\;C:\Program Files\Intel\Wireless\Bin\;C:\Program Files\ThinkPad\ConnectUtilities;C:\Program Files\QuickTime\QTSystem\ -Djava.class.path=C:\bea\weblogic91\server\lib\weblogic.jar;C:\bea\jrockit90_150_04\lib\tools.jar;c:\bea\weblogic91\server\lib\wamapps\commons-logging.jar;c:\bea\weblogic91\server\lib\wamapps\log4j.jar;c:\bea\weblogic91\server\lib\wamapps\xalan.jar;c:\bea\weblogic91\server\lib\wamapps\xercesImpl.jar;c:\bea\weblogic91\server\lib\wamapps\xml-apis.jar -Dweblogic.system.BootIdentityFile=C:\bea\user_projects\domains\jdev\servers\jdevext\data\nodemanager\boot.properties -Dweblogic.nodemanager.ServiceEnabled=true -Dweblogic.security.SSL.ignoreHostnameVerification=false -Dweblogic.ReverseDNSAllowed=false java -server -Xgcprio:pausetime -Xpausetarget=400ms -Xms:256m -Xmx:384m -Xns:81m -Xgcpause -verbose weblogic.Server >
    <May 24, 2006 11:16:55 AM> <Info> <NodeManager> <Working directory is "C:\bea\user_projects\domains\jdev">
    <May 24, 2006 11:16:55 AM> <Info> <NodeManager> <Server output log file is "C:\bea\user_projects\domains\jdev\servers\jdevext\logs\jdevext.out">
    Usage: java [-options] class [args...]
    (to execute a class)
    or java [-options] -jar jarfile [args...]
    (to execute a jar file)
    where options include:
    -jrockit     to select the "jrockit" VM
    -client     to select the "client" VM
    -server     to select the "server" VM [synonym for the "jrockit" VM]
    The default VM is jrockit.
    -cp <class search path of directories and zip/jar files>
    -classpath <class search path of directories and zip/jar files>
    A ; separated list of directories, JAR archives,
    and ZIP archives to search for class files.
    -D<name>=<value>
    set a system property
    -verbose[:class|gc|jni]
    enable verbose output
    -version print product version and exit
    -version:<value>
    require the specified version to run
    -showversion print product version and continue
    -jre-restrict-search | -jre-no-restrict-search
    include/exclude user private JREs in the version search
    -? -help print this help message
    -X print help on non-standard options
    -ea[:<packagename>...|:<classname>]
    -enableassertions[:<packagename>...|:<classname>]
    enable assertions
    -da[:<packagename>...|:<classname>]
    -disableassertions[:<packagename>...|:<classname>]
    disable assertions
    -esa | -enablesystemassertions
    enable system assertions
    -dsa | -disablesystemassertions
    disable system assertions
    -agentlib:<libname>[=<options>]
    load native agent library <libname>, e.g. -agentlib:hprof
    see also, -agentlib:jdwp=help and -agentlib:hprof=help
    -agentpath:<pathname>[=<options>]
    load native agent library by full pathname
    -javaagent:<jarpath>[=<options>]
    load Java programming language agent, see java.lang.instrument
    <May 24, 2006 11:16:57 AM> <Info> <NodeManager> <Server failed during startup so will not be restarted>

    It looks like your command line is broken. You have:
    java <lots of -Dprop=value> java <JRockit flags> weblogic.Server
    That second "java" shouldn't be there.
    -- Henrik

  • Why site database server for Central Admin site not accessible?

    Hello everyone,
    I've this issue where; when connecting a primary site to existing central administration site; setup prerequisite checker 
    continue to notify it cannot establish connection to SQL server having central administration site database. The SQL server 
    having central site database is installed locally on the server central administration site is hosted on. Both servers 
    (central administration site server, the new server to host child primary site required to join that central administration 
    site) having following configuration:
    A. Central Administration site server, with site database server installed locally: 
    Name:             HQCAS
    OS:                WS 2008 R2 SP1, fully patched.
    SQL Server:     SQL Server 2008 R2 with SP2. Correct required SQL server collation set supported by CM2012.
    SQL Server named instance: CASDB
    Local firewall ports opened: 1433, 4022  (via inbound rules created in group policy, same GPO applies to primary site 
    server)
    SQL Server broker service Enabled: True.
    TCP/IP: All dynamic ports left blank to support static port 1433.Static port 1433 configured for all IPs. 
    IP Address: 10.1.1.250/8
    Local SAM:      Both server computer accounts added to local 'Administrators' group on both servers.
    Domain service account: svcCASDB
    SPNs registered:        2x, one for HQCAS hostname on instance CASDB on port 1433, second for FQDN for HQCAS on instance 
    CASDB on port 1433.
    SQL Server Logins:   Security group containing both computer accounts for HQCAS & STPRS. Both account having sysadmin SQL 
    server role assigned.
    SQL Server browser service running.
    B. Primary site server, with SQL server installed locally: to join HQCAS CM2012 hierarchy:
    Name:             STPRS
    OS:        WS 2008 R2 SP1, fully patched.
    SQL Server: SQL Server 2008 R2 with SP2. Correct required SQL server collation set supported by CM2012.
    SQL Server named instance: CM12PRIMARY
    Local firewall ports opened: 1433, 4022  (via inbound rules created in group policy, same GPO applies to central 
    administration site server)
    SQL Server broker service Enabled: True.
    TCP/IP: All dynamic ports left blank to support static port 1433.Static port 1433 configured for all IPs. 
    IP Address: 172.168.1.250/16
    Local SAM:      Both server computer accounts added to local 'Administrators' group on both servers.
    Domain service account: svcCASDB
    SPNs registered:        2x, one for STPRS hostname on instance CM12PRIMARY on port 1433, second for FQDN for STPRS on 
    instance CM12PRIMARY on port 1433.
    SQL Server Logins:   Security group containing both computer accounts for HQCAS & STPRS. Both account having sysadmin SQL 
    server role assigned.
    SQL Server browser service running.
    Tests performed:
    Telnet to/from both HQCAS/STPRS on ports 1433, 4022 establishes connection. Please help
     

    Hello friends,
    My finding it finally is....there wasn't any configuration issue as I mentioned above.
    I'm using an evaluation edition of SQL Server 2008 R2; it just allows default instance (MSSQLSERVER) to be used, not a named instance. 
    The confirming test for this was...I re-installed SQL Server with all the same settings except changing from a named instance to default; once I finished applying service pack 3. I could initiate WSUS 3.0 SP2 x64 setup and point it to use this SQL server.
    WSUS setup completed without any errors. This was not happening when named instance was all configured properly. It was just not accessible from outside.
    Well this is what my finding is. For lab environment of CM2012 it suffices the need.
    Regards,
    Shahzad.

  • Question regarding Listener and Server Processes in dedicated server mode

    Good morning,
    The Oracle documentation states that when a client connection request is received on the server, the Listener creates a Server Process which will work with the database instance to carry out the tasks requested by the user/client process. So far, everything good.
    Now, when the user is at the Oracle server itself, the Listener does not need to be running to establish a connection to the database. It is therefore possible to stop the Listener and still connect using sqlplus and a valid username and password.
    In the above case, the question is: if the Listener is not running, what/who created the Server Process that communicates with the database instance on behalf of the user ? Stated a different way, in the normal case, the Listener would get the request and create the server process. When the Listener is not running what part of Oracle gets the requests and creates the server process ?
    Clarification on how this case is handled is much appreciated, thank you,
    John.

    When using bequeath protocol the server process is created by the client process: it's the client process that is using ORACLE_SID and ORACLE_HOME to compute shared memory key (under UNIX) to know which SGA to attach (i.e. which instance to connect to):
    Example with SQL*Plus :
    $ ps -fu oracle | grep DB112
    oracle    5675     1  0 18:13 ?        00:00:00 ora_pmon_DB112
    oracle    5677     1  3 18:13 ?        00:00:02 ora_vktm_DB112
    oracle    5681     1  0 18:13 ?        00:00:00 ora_gen0_DB112
    oracle    5683     1  0 18:13 ?        00:00:00 ora_diag_DB112
    oracle    5685     1  0 18:13 ?        00:00:00 ora_dbrm_DB112
    oracle    5687     1  0 18:13 ?        00:00:00 ora_psp0_DB112
    oracle    5689     1  0 18:13 ?        00:00:00 ora_dia0_DB112
    oracle    5691     1  0 18:13 ?        00:00:00 ora_mman_DB112
    oracle    5693     1  0 18:13 ?        00:00:00 ora_dbw0_DB112
    oracle    5695     1  0 18:13 ?        00:00:00 ora_lgwr_DB112
    oracle    5697     1  0 18:13 ?        00:00:00 ora_ckpt_DB112
    oracle    5699     1  0 18:13 ?        00:00:00 ora_smon_DB112
    oracle    5701     1  0 18:13 ?        00:00:00 ora_reco_DB112
    oracle    5703     1  0 18:13 ?        00:00:00 ora_mmon_DB112
    oracle    5705     1  0 18:13 ?        00:00:00 ora_mmnl_DB112
    oracle    5707     1  0 18:13 ?        00:00:00 ora_d000_DB112
    oracle    5709     1  0 18:13 ?        00:00:00 ora_s000_DB112
    oracle    5745     1  0 18:13 ?        00:00:00 ora_arc0_DB112
    oracle    5747     1  0 18:13 ?        00:00:00 ora_arc1_DB112
    oracle    5749     1  0 18:13 ?        00:00:00 ora_arc2_DB112
    oracle    5751     1  0 18:13 ?        00:00:00 ora_arc3_DB112
    oracle    5753     1  0 18:13 ?        00:00:00 ora_qmnc_DB112
    oracle    5769     1  1 18:13 ?        00:00:00 ora_cjq0_DB112
    oracle    5773     1  0 18:13 ?        00:00:00 ora_q000_DB112
    oracle    5775     1  0 18:13 ?        00:00:00 ora_q001_DB112
    oracle    5777     1  1 18:13 ?        00:00:00 ora_vkrm_DB112
    oracle    5785     1 46 18:13 ?        00:00:24 ora_j003_DB112
    oracle    5797  5796  2 18:14 ?        00:00:00 oracleDB112 (DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
    oracle    5832  5801  0 18:14 pts/2    00:00:00 grep DB112
    $ ps -fp 5796
    UID        PID  PPID  C STIME TTY          TIME CMD
    oracle    5796  5584  0 18:14 pts/1    00:00:00 sqlplusThis is also documented in 11.2 Net Admin. Guide http://download.oracle.com/docs/cd/E11882_01/network.112/e10836/concepts.htm#CIAFHAEE
    >
    If the client and database exist on the same computer, then a client connection can be passed directly to a dedicated server process without going through the listener. This is known as a bequeath protocol. The application initiating the session spawns a dedicated server process for the connection request. This happens automatically if the application used to start the database is on the same computer as the database.
    >
    Edited by: P. Forstmann on 5 sept. 2010 18:23

Maybe you are looking for

  • Presenter 8 – new features for subs only - problems

    Hi I've an annual subscription at Elearning Suite 6, but I can't find in Powerpoint the new features for subscription customers only. For example the  interactions such as jigsaw, hangman etc. as you can see in the image attached. Can I do anything?

  • How can I swap or cut & paste a head from one photo into another for a holiday photo using aperture or photoshop?

    I've got an almost perfect family photo that I need to swap one face in as my son was not looking at the camera and I can't redo the shoot.  Anyone know how to take a headshot from one pic and swap it into another using Aperture or Photoshop?  Thanks

  • Video podcats not showing up in ios7

    Upgraded to ios7 now when I go into the videos app none of the video podcasts I have synced to my ipad are not displaying. It's only displaying movie downloads. I re-synced and that didn't work. Any suggestions? Are video podcasts not viewable throug

  • Mixing D3100 1080p 24fps with Gopro hero 1080p30fps

    Hey all, I want to shoot constant POV Video with my Gopro hero hd, and then capture some unique stuff with my Nikon D3100 and combine them in one project using Premiere Elements 9.  If I set them both to 1080p, then the Gopro is 30fps, and the Nikon

  • Anonymization ??

    Hello, searching for an error from production in test system I realised that names are very different in every system for the same employee number. I told the business partner that there should be a problem in test system because employee 1234 with n