OS X Server & Time machine problems

Hi,
I have iMac 2011 as a server with external hdd for macbook air 2012 backups.
Problems are following:
1) server app crashed 2 times for the last week. By itself (while iMac slept).
2) Time machine won't work with MBA 2012. MBA can see servers drive and (if I'll delete its old backup from server) will backup 2-3 times, but then (again) it writes "Looking for backup disk" and then
For now I want to use iMac only for server purposes (time machine + bittorrent sync + iTunes).
I think, I want not that much from iMac. Please, help

Hi
Servers shouldn't sleep !?
Maybe, read the bible : http://pondini.org/TM/FAQ.html
Bye

Similar Messages

  • Best Setup for Lion Server Time Machine Backup with Drobo?

    I've been thinking about this a lot, yet I don't feel I have a good solution for this, so I'm going to throw it out to the community.
    I have a home server setup using a Mac Mini running Lion Server 10.7.2 with a Firewire 800 Drobo attached.  The Drobo is used for both Time Machine backups and files.  I also have a Powerbook G4 running Leopard and a MacBook 2.4 GHz Intel Core 2 Duo with Lion 10.7.2 which connect to the Server and the Drobo wirelessly thorugh an Airport Extreme.
    I want to use Time Machine to have all of my computers back up to the server & Drobo, but realize there are several ways to go, each with their pluses and minuses:
    Server Time Machine Backup:
    + Centralizes backup process, rules, and other elements
    + Currently Mac Mini is backing up to the Drobo correctly using this process
    + Have setup size limit on Server backup so that it does not eat up file space
    - Would combine laptop backups with server backup into one sparse image: this would lead to the computer with the largest backup needs taking up too much space
    Client-Driven Time Machine Backup:
    + Allows for customization of backup processes by computer
    + Can setup specific space requirements for each computer
    + Backups are separate from each other
    - Wireless backup from laptops to Drobo is not functioning currently
    Any thoughts or experiences on how best to set this up?  I tend to do most of my work on the MacBook, hence I am concerned about it having it's backup space eaten up by the server, but that may be more of a theoretical issue than a real one.
    Thanks in advance for your help!

    Well I'm not sure if I am following you but I will explain how I set mine up. When I got the Drobo I inserted 2 drives and selected the highest available volume I could (16TB). My drives are 4 TB each and I knew I would soon add 2 more. Then Drobo did its thing and prepared these drives. The Drobo shows up on my mini desktop as an external drive. When I log into my server from my other computer I can see the mini server volume and the Drobo volume. I can access each no problem. They act as regular volumes. Soon after I added the second two drives and everything stayed the same meaning I could still see and access the Drobo on the desktop of my mini. So it sounds like you used the Drobo dashboard to partition yours for two volumes? Are they both showing on the desktop? 
    "Maybe the Drobo needs to be mounted on the desktop to be considered AFP feature enabled." I could be wrong and hopefully someone will correct me but I think the Drobo (or volumes) have to be mounted on the desktop to work with AFP.

  • Lion Server Time Machine sparsebundles

    Subject indicates where I think my problem lies, but for background:
    MacBook Pro got bit by Thunderbolt firmware upgrade snafu last week. Contacted Apple Store the next morning, saw Genius at 11:00. Concuded hardware and firmware were OK and because I had a Time Machine backup less than an hour old I gave permission to install a fresh 10.7.3 image on my bare metal.
    Got home and booted Command-R. Happily saw my Time Machine shares on Mac Mini Server running Lion Server 10.7.4. Yes, "shares." A Backup and Backup-1.
    As a Lion Server novice I found a tip here to "defaults write /private/var/db/dslocal/nodes/Default/sharepoints/Backups timeMachineBackup '(1)' to make my shared mountpoint work with Time Machine over the network. Perhaps thats how one does it if one doesn't have Server. I later found the Time Machine panel in Server and turning that on gave me a Backups-1 share as well.
    So back with Command-R my MacBook Pro saw both the Backups and Backups-1, I navigated to Backups and it saw its previous Time Machine archive. I started a bare metal restore and happily went to bed. Next morning found the restore stopped at about 20% of the progress bar and message instructing me to reboot the computer. Repeated, same results.
    Back to Command-R I reinstalled a new copy of Lion from Apple over the internet. Did minimal configuration until I could get into Time Machine and try to manually pull files. Again it quit unexpectedly no matter holding the Option key to Verify Backups passed.
    So back to the Mac Mini Server I turn off Sharing from System Preferences and Time Machine from Server. The /private/var/db/dslocal/nodes/Default/sharepoints/Backups file disappears when Server Time Machine is turned off.
    I have attempted to move "David Kelly's MacBook Pro.sparsebundle" from "/Volumes/Macintosh HD2/Backups" to "/Volumes/Macintosh HD2/Shared Items/Backups" where Server Time Machine seems to expect it. The problem now is that the MacBook Pro doesn't see this Time Machine archive in that location, or see it at all.
    I have performed the Disk Utility verify tasks listed in the Time Machine FAQ with no errors found or repaired.
    I have seen a -6584 error this week but don't remember exactly when: https://discussions.apple.com/thread/3123920?start=0&tstart=0
    How can I get the sparsebundle back under Time Machine Server?

    Finally figured it out on my own 2 weeks later.
    You have to open the Lion Server app and then turn on Time Machine on the server.
    It will then ask what disk you want to use, which in my case was an external 2tb USB.
    My confusion was that this is not they way you had to do it on Snow Leopard Server.
    On SLS, I never used Time Machine, but had to partition my external disk individually for each user.  e.g.  2tb disk was partioned into 4 separate volumes.  This was necessary to keep one user's Time Machine backup from taking up the whole disk and not leaving room for the other users.
    You then setup these partitions as Time Machine Sharepoint which would then show up as a choice on the users machine under Time Machine preferences, select disks.
    Therefore, under SLS, a user could select from any number of partions to backup to on the server.  On Lion Server, it appears you do not have a choice and can only backup to the one disk you selected on the Server App.
    At the risk of carrying on a conversation with myself online, my concern is now about limiting the size of the individual user's sparse bundle to again keep one user from taking up the entire disk for their Time Machine.  I guess that is another fight for another day.

  • Server Time Machine Needs Fileshare Mount

    I've got a Server set up as a Time Machine host. I can see it in the Time Machine preferences on clients if it's volume is mounted via fileshare first, but if I dismount it, I can't see it anymore.
    Once it's selected as the backup source, the client will automatically mount the share during it's regular backup. However, now that I'm trying to restore from backup, I boot from the install disk, go to restore system from backup, and it can't see the server backup. I can't mount the fileshare manually like I do from a normal OS, and I can't boot off another drive and use the Install Disk's restore option.
    I thought perhaps I could use the "mount_afp" command via Terminal, but this mounts the share as unreadable, and inaccessible again via Time Machine.
    1. How do I get Time Machine to show the server's backup volume, without manually mounting it via fileshare?
    2. Barring that, is there any way of doing a complete Time Machine restore, that allows me to first mount a fileshare volume?

    Everyone in my company is having the exact same problem. We bought an Xserve and Xserve RAID with the sole intention of using it for backups and calendar/contact sharing. This Time Machine problem makes the application next to useless for most of the users, as they aren't going to remember to mount the AFP share every single login.
    Coupled with the inability of iCal Server to handle event invitations to individuals not in LDAP, we're questioning sticking with Apple products in the future. This release of Leopard/Leopard Server seems to be missing some major features for some of the most simple workgroup applications.

  • Restore Lion OS from Lion Server Time Machine Backup?

    I am running a Intel Imac 2008 clean install SL then Lion upgrade, followed by Lion Server install.  I have multiple home macs, and intnded the server as a way to monitor and restrict kids internet use.  In short, it has changes/screwed up multiple programs, and complicated home sharing issues considerably.  Mail on the server machine has permission problems (cannot send mail, unable to sign), Spotlight in mail is non-functioning, finder spotlight searches are inconsistent, etc.  I want to revert to plain old Lion.
    I have done disk utility/verify disk and verified/repaired permissions, and have 'fiddled' (i'm not an expert) in the keychain/certificates areas, but I think the best solution is a clean install of Lion.  QUESTION:  When I backup to TIme Machine, is there a way to pull a 'Lion' version of my disk image back, and just not upgrade to Server?  I understand I can disable Server and turn off applications in Server, but it doesn't fix my buggy machine.  My options are to back up my 250GB of music, 100GB of photos, 100GB of movies, etc on to external drives, and clean install and then reimport everything, but even that will probably mean I cant reinstall my single user licesnse of MS office, VMware fusion, etc that I didn't buy on the App store.  I'd really love to be able to do this with Time machine.  Any chance?  or do I need to do the dark deed of 2 days of backup? 

    Sorry, I don't mean to be stupid, but I want to be sure.  My impresion of Time machine disk images (I'm not a computer genius, but I'm , lets say, an expert novice) is that disk images (my term for the 'total view' of a computers main disk), differ depending on the OS.  I assume that applications and preferences referenced under SL could not be seamlessly imported into a Lion environment.  I'm assumng that the upgrade to Lion server has irrevocaby altered my startup/main volume into a "Lion Server" volume, and that if I try to pull my applications/data/preferences/mailboxes back onto a fresh Lion interface, it won't work.  Are you saying I'm wrong, and that I can simply erase my disc, clean install Lion via an internet connection, and re-import my "lion Server- altered' stuff back from aLion-server Time Machine disk image, seamlessly, into a Lion OS environment?  Sorry to be so concrete, but my wife will kill me if I %$@ the bed on this.  I appreciatre your help.

  • Help, I am about to pull my hair out, can't get into a locked drive and Time Machine problem

    I've screwed everything up, I think.  I had Time Machine doing backups to an external 500Gig drive and somehow it got locked.  I went into Get Info to try and change the access but it won't allow me.  On top of this problem, my original drive died and I can't get into Time Machine to restore.  When I click "Enter Time Machine", nothing happens.  I created an eDisk and a startup disk to another external drive that I'm using now, but since everything that's been backed up is on the other drive that I can't access.  When I try accessing the drive it gives:  "The folder “G-DRIVE ” can’t be opened because you don’t have permission to see its contents."  I'm not knowledgeable enough to work from the command line, so if I need to do that to access the drive, please walk me though it.  As for the Time Machine problem, I have no idea how to recover anything since it won't even come up, it just sits there.  Outside of blowing my brains out, I don't know what to do.  Any help would be greatly appreciated as I can't afford to take it to Apple to let them try and fix it.

    Hello, not sure how this might affect a TM drive, or not, but...
    Here is what i needed to do for my drive "320GB HD", the last command is just for clean up
    Open Terminal and type these commands carefully with the spaces & change 320GB HD to the name of your drive.
    sudo chflags 0 "/volumes/320GB HD"
    sudo chown root "/volumes/320GB HD"
    sudo chmod 1775 "/volumes/320GB HD"
    sudo -k
    That said, these should be sufficient to do the job:
    sudo chflags 0 "/Volumes/320GB HD"
    sudo chmod a+rx "/Volumes/320GB HD"

  • Time Machine problems

    My question is this: Is there any way to force Time Machine to make a complete backup of all files, not just the recently changed ones?
    My story so far:
    Installed Leopard yesterday. Detected brand-new (and newly Mac formatted Extended Journaled) Seagate 300GB hard drive and asked if I wanted to use it for Time Machine. Answered yes. Thought I was through with worrying about Time Machine- wrong! First backups went OK- so I thought. First one took several hours and seemed to back up the whole drive. Subsequent ones were shorter, which seemed to make sense. After a couple backups had been performed, decided to see if I could "go back in time". The only window to show up was the original backup (which I never bothered to check to see if it truly was complete). This morning I was greeted with an error that it couldn't do the backup because it couldn't complete the library.
    So I come to this forum and read posts advising me to reformat my drive and name it with no spaces (it was previously "Backup Disk"). I did that, erasing all previous backups. Seemed to help, but...
    Now, unfortunately, Time Machine doesn't realize that the backups are not there anymore and will not do a complete backup with my completely empty external drive. I even tried removing the com.apple.TimeMachine.plist file from its place in the directory to see if that would force the program to build a new library. It didn't.
    Not even sure that making a complete backup again will solve all my Time Machine problems but it's a start!

    I had this same problem when I first started using my Time Machine on my MBP. I had a portable drive (Western Digital 160 gig passport drive).
    I was advised by the tech to do the following before the first use of the drive:
    1. Turn off the time machine
    1. format the drive with your disk utility.
    3. configure the time machine for the drive.
    4. Turn on the time machine. Make sure your not backing up anything but your main hard drive. (Your shouldn't back up any other external hard drives). At least not the first time you run Time machine.
    5. start the backup.
    The first backup is always the longest, but it shouldn't take that long, especially if your doing the Macbook Air.
    Hope this helps.

  • Server Time Machine vs File Sharing TM

    For a couple of years I have used file sharing on my Mac Mini to provide Time Machine backup space for the Mac Books in my collection. This has worked well, with multiple hard drives and partitions providing redundant backup space (every Mac has at least two concurrent Time Machine backups, each in different hard drives attached to the MM). I have been examining OS X Server, and am wondering what benefit Server Time Machine service offers over my current arrangement. I can see no functional difference. Is there any?

    Functionally, I don't believe so. If you're able to back up and restore your Macs over your LAN using File Sharing then the Time Machine Service in OS X Server won't do you any good.
    I use OS X Server and the Time Machine Service for back ups/restore. I know I can restore any Mac client as long as the server (Mac Mini) is up and running. I simply select the network back up while in the Recovery HD of the client, log into it and select the date I want to restore. I don't know how File Sharing works if you have to restore one of your Macs from the Recovery HD.

  • Backing up client to server external drive with Time Machine - problems...

    Hi,
    I'm running 10.5.2 server on a MacMini (G4 1.25GHz/1GB) which has an external firewire drive that has been set as a sharepoint for Time Machine backups. The problem is that from the client MacBook (10.5.2 - connected on a wireless g network) I can select the drive in the Time Machine preferences but when I accept the changes it resets to the 'off' position.
    Hmmm? Any ideas?

    The server wasn't set up in Advanced. I'm not trying to back up the server itself but the client.
    Can anyone offer any ideas!?

  • Mavericks server time machine restore problem

    i have a mac mini with mavericks server installed
    i have backed up my imac to the mac mni server without any problems can enter time machine and install files but when trying to do a system restore
    This is where my trouble arises, initially the window is populated with a username of "root" which is of course the user name I'm running under on the install disk, I change that to my user name or user nickname (have tried both) and enter my password for the osxbackup.local machine and I end up getting a dialog box with "There was a problem connecting to the server osxbackup.local" it goes on to say Check the server name and ip address and if problem continues contact my administrator.   So I'm stuck here, I know my username and password are correct I've tried variations between my name and nick name but always get the same error.  I get the same error if I use a 10.9.0 install disk as well.  It seems that it is unable to contact the server based on the message but clearly the network is operating or we wouldn't have gotten this far.  The only thing I see is in the error message it says "osxbackup.local." note the period after local.  I assume that is a formatting thing and not an incorrect address and I know of no way to change this anyway. So what I thought would be a "simple matter" has like most things turned into an ordeal getting stuck on something that should be very simple.  Hopefully someone can shed some light on this?

    Do not rely on Time Machine to backup OSX Server. It does not work for restores and Apple says not to use it for server. Use Carbon Copy Cloner.
    Also, you should Raid 1 mirror the server drives so if one drive fails you have the 2nd drive that keeps running and you just swap out the bad drive and redo the mirror. You also need to have another backup and disaster recovery plan in place in case both hard drives fail. This mean an external backup drive to run carbon copy cloner to. Also some sort of offsite backup is also needed.

  • Time Machine Problems with OS X  Server

    I have been using a MacMini with OS X server for about 5 months, backing it up to Time Machine on an external Western Digital MyBook (2 TB) hard drive. I had no problems until recently, when I migrated all of my iTunes media onto the home user profile on the Server. Time machine now completes backing up about 97% of my files, but consistently will not complete backing up the final 2-3% of files, giving the following error message? "The backup was not performed because an error occurred while copying files to the backup disk." The backup file is listed on the external drive as "2010-04-04-10491.inProgress". This indicates to me that there are certain files that Time Machine will not backup now. I have checked the file sharing permissions on both MacMini hard drives and can not see any problems. I have restarted the system many times with a similar result. I have also reformatted the external drive, with a similar result. Does anybody out there have any suggestions? Thanks for any help you can offer.

    The logs didn't really help much.
    It looks like it's a permissions issues. There are permissions problems with some of the files on the source disk. Here is what I had to do to fix. I'm sure there is an easier way to do it, but this is what worked for me...
    1. Deleted all of my sharepoints in Server Preferences
    2. As root, changed the permissions to all of the files on my source disk (recursively) to be owned by my main admin user—the one running the backups.
    3. Re-created my sharepoints
    That worked for me. Hope it helps others.

  • Time Machine - Problem with establishing a connection to the server

    Using LionMac OS X Version 10.7 and when attempting to setup Time Machine to make backupto my ReadyNas Duo, the setup fails and I receive the following message(translated from Danish):
    “There wasa problem with establishing a connection to the server ”SERVERNAME”.
    The versionof the server that you attempt to establish connection to, is not supported.Contact the system administrator to solve the problem.”
    Any ideasfor a solution?

    Please follow these instructions:
    Lion: Connecting to legacy (pre-Lion) AFP services - and Mac OS X (server):
    https://discussions.apple.com/thread/3258472

  • Time machine problem connecting to server x.local.

    I've recently upgraded my home computers to Mavericks (2 mini servers and 4 macs).  I run time machine services on one of the servers and everything seemed to be working fine (macs succesfully backing up as scheduled, etc).
    Well... this week I needed to restore some files from backup.  While I can connect to the server when booting normally to Mac HD, some of the files I need to recover are in use when doing so.  So I booted to the recovery partition on and selected Time Machine from the menu.  After I selected the server from which I wanted to restore, I was prompted to enter a username and password.  Upon entering, I was greeted with the message "There was a problem connecting to the server 'x.local.'  Check server name or IP address and try again". 
    I've tried using a variety of user accounts (including root and other admins).  I'm also able to ping the server using Terminal by name and address. But alas, no luck.
    Any help would be greatly appreciated!
    Thanks in advance, Dave

    If you open AirPort Utility........can you see the old Time Capsule?
    If yes, click on the old Time Capsule icon, then click Edit in the smaller window that appears
    Click the Base Station menu (up at the top of the screen where the File, Edit, Window and Help menus reside
    Click Show Passwords
    Time Machine is looking for either the Base Station password  (which may or may not be the same as the Wireless password)....or....the Disk Password.....if you set up a Disk Password that was separate from the Base Station or Wireless password.

  • Retrieving calendar and contacts data from OSX Server Time Machine

    Due to a system failure I went out an brought a Macbook Air. My other Mac is away being assessed by a repair shop.
    By plugging in the Time Machine drive from the other Mac I have managed to recover my files, videos, photos etc. Contacts and Calendars however are proving to to more difficult.
    The old Mac was setup using Mavericks Server as a workaround for the removal of Calendar and Contacts iTunes sync in Mavericks.
    The Contacts and Calendars are currectly synced with an iPad and an iPhone.
    Is there anyway of recovering the Contacts and Calendars data from the Time Machine backup drive, My iPad or iPhone?
    Any help appreciated with this complicated problem.
    John

    It sounds as if it is the same, or closely related, to this thread  Time Machine Service Page in Server App says "Error Reading Settings"

  • Time Machine problems behind network switch?

    Just installed a Netgear GS108T gigabit switch and placed my Mac Mini w/backup drives that was being used as a HTPC and Time Machine server behind it, along with the other computers. Neither my Macbook (wireless to router which is also plugged into switch) nor Mac Pro (connected to switch) can backup. I can see & login to the Mini, as well as mount the drives. However, the sparsebundles for the various computers do not mount for very long... they show up then disappear immediately and TM does not complete the backup. Aside from the improved file transfer speeds and lack of TM backups, I haven't noticed any differences after installing the switch so it's been pretty transparent.
    Any ideas?

    Figured it out. I had to reboot the computer and power cycle the drives that TM used, and found that it fixed things. For some reason I could check them with Disk Utility from all computers (including the host, and no problems found) but not mount them. So a reboot and power cycle of drives fixed it for some weird reason. I thought it was the switch (all devices are plugged into it) as it happened the same night as I installed it, but it was just a coincidence I guess, especially since it was an unmanaged switch. Thanks!

Maybe you are looking for