OSB 10gR3 and the HTTP 1.1 specification

Per RFC 2616 (14.23) the Host request-header is supposed to have Internet host and port number of the resource being requested.
When using HTTP transports with transport headers in the message flow, the Host header is copied from inbound to outbound. However, this means it does not conform to the standard.
If the call to the OSB is http://www.mybus.com/something then the Host header comes in as www.mybus.com
Then the OSB forwards the call to http://www.myservice.com/something. The Host header should be set to www.myservice.com but it remains www.mybus.com.
Without manually overriding the Host header value in dozens of message flows, is there a way to have it set to the value specified in the business Proxy?

I'm 100 % sure that OSB doesn't copy Host header from inbound to outbound by default. If you use Transport Headers in your flow, then you should explicitly transport only headers which are useful for your case. If you use (for example) "Pass All Headers" option, than you shouldn't be surprised that all headers are transferred.
http://download.oracle.com/docs/cd/E13171_01/alsb/docs30/userguide/modelingmessageflow.html#wp1125345

Similar Messages

  • OSB 10gR3 and ODSI 10gR3 for Windows 64-bit

    Hi,
    I'm looking for Oracle Service Bus 10gR3 and Oracle Data Service Integrator 10gR3 installables for Windows 64-bit. However, I saw the available versions on download section are only for indows 32-bit. I'm using win 64-bit to detect 4BG RAM or more which is not possible in win 32-bit.
    Can anybody help me wheather compatable version are available or is there any solution for that?
    Thanks in advance,
    Ganesh

    There doesn't seem to be 64bit version of OSB at all for Windows. [http://download.oracle.com/docs/cd/E13196_01/platform/suppconfigs/configs_al10gr3/osb10gr3/overview.html]

  • How do I remove "printinvoicesRedirect.jsp and the https file from printed invoices

    I am printing invoices and a line of test appears on top and bottom of sheet. Top left reads "printinvoicesRedirect.jsp" - Top right reads "https:// (then adds the website I'm printing from.
    The bottom of the sheet prints "1 of xx" and date and time. How do I remove these from my customers invoices?

    I'm guessing the page is a PDF, and it is being displayed in the new Firefox 19 PDF Viewer? Unfortunately, there is currently no way to suppress headers and footers in the PDF Viewer without changing Page Setup globally. More information in this thread: [https://support.mozilla.org/en-US/questions/951147 Print from the PDF viewer without page information].
    To switch to the Acrobat plugin, or an external application, see this article: [[How to disable the built-in PDF viewer and use another viewer]].

  • OSB 11g and the ServiceConfigurationMBean

    Hello,
    In OSB 10.3 I was able to modify the BusinessServices by using JMX through the ServiceConfigurationMBean. How can I do that in the 11g? The ServiceConfigurationMBean seems not to exist anymore.
    Thanks.

    Metalink is Oracle's support web-site - http://support.oracle.com/
    If you have an Oracle support account then you can find the note I mentioned on the support web-site.
    Regards,
    Anuj

  • How to install OSB, ADF and BI Bublisher together on WLS?

    Hi,
    We have to install OSB, ADF, BI Bublisher and the Oracle Service Registry together on an Oracle Weblogic Server. We have tried different strategies regarding the order to install the
    components in and the number of domains, but are struggling with getting it to work.
    There must be a best practice for the order to install the components in and a preferred way to distributed the components in domains. We have not found any documentation that describe
    this.
    Can anybody help?
    Here are the versions of the components:
    - WLS 10.3.0.0
    - OSB 10gR3
    - ADF The one that comes with JDeveloper 11.1.1.0.1
    - BI Publisher 10.1.3.4.0
    - Oracle Service Registry 10.3.0.0
    Regards Pete

    Please try [Web Logic Forum|http://forums.oracle.com/forums/forum.jspa?forumID=570] for your question and you may have better chance to get any hints or help.
    regards,
    AMN

  • Worlds Largest Photo and the Worlds Largest Camera...

    A friend of mine sent me the link for this. The photo (1 single photo)
    measures 28 feet by 108 feet. The camera they used to take this shot was an
    aircraft hanger. It has been certified by Guinness as the worlds largest
    photograph.
    And, people made fun of because I complained that Lightroom couldn't handle
    an image larger than 10,000 pixels, giggle!!!!!!
    http://www.legacyphotoproject.com/
    Robert

    HAVE A YOODLE...RELAX.... WELCOME TO THE LOUNGE !
    its beer thirty... !!! yipee !!!!!
    ( somethings wrong with my zoom setting or something re: type size and font etc... oh dear.... nothing looks quite normal )
    of course it could be the pain killer medicine I'm taking and the beer....
    Anyway...here's an interesting tidbit of info re: a new scientific discovery about car accidents and people being high on pot....
    This study came about due to the new medical pot stuff going on ( legalized ) and the resultant car crashes that apparently happen if drivers on medical pot ( especially mixed with drinking beers etc )...
    It sorta makes you wonder ...
    kinda makes you wonder What the newspaper reporter was smoking... to come to this conclusion so late in the game...
    http://yourlife.usatoday.com/health/story/2011-10-14/Pot-smoking-may-more-than-double-cras h-risk/50774786/1?csp=hf
    excerpt ===========drivers smoking pot may increase risk of car accident ====
    Overall, the risk of a crash was almost 2.7 times higher among marijuana users than non-users, the authors found. And the response was dose-specific, the authors said. That is, the more marijuana smoked -- in terms of frequency and potency -- the greater the likelihood of a crash.
    =============
    OK... I am through keeping everyone abreast of my internet studies today... and will now drink more BEERS and take another vicadin ( sp ? ) due to oral surgery pain ...and DONT WORRY... I AM NOT WALKING LET ALONE DRIVING !!!!

  • Problems starting the http server

    I have problems starting 9ias http server. I issue:
    /u09/ora9ias/infra/opmn/bin> opmnctl startall
    opmnctl: starting opmn and all managed processes...
    Request partial success -- 1 of 4 processes started.
    and the HTTP server does not start.
    If I go to the enterprise manager, the only service started is Single Sign On.
    If I try to enter to the HTTP server it gives me the following error:
    An error was encountered while loading page. Failed to initialize configuration management user session.. Repository access failed Root Cause: Password could not be retrieved. Password could not be retrieved
    The iasdb is already started and working.
    Any clues what can be going wrong??
    help is greatly appreciated.

    Jorge, I suspect you've already fixed this problem. But if not, I have a standard operating procedure for this. Here's the gist of it, let me know if you need more detail.
    1. shutdown the opmn layer (opmnctl stopall)
    2. determine if the httpd.pid file exists (it's in the Apache/logs directory on linux)
    3. delete the .pid file if it's there
    4. if not, or if there's still a problem, tail the error_log for info
    5. try to start the httpd (dcmctl start -ct ohs)
    6. still a problem? ps -auxw | grep httpd
    7. kill off the process(es)
    8. try again to start up with dcmctl command in step 5
    I can usually get it going at this point. If not, I have to do a reboot, which has always worked. Don't forget to shutdown the emctl and webcachectl if you're rebooting.
    Hopefully this helps. It took a lot of learn-as-you-go for us to get this procedure. I'm sure the pros will role their eyes! :-)

  • Query regarding the tutorial for Oracle Service Bus (OSB 10gR3)

    Hi,
    I am working on a tutorial of Oracle Service Bus (OSB 10gR3).
    I have created the proxy service and the Business Service, using Oracle Service Bus console.
    The details are as follows:
    Proxy service: LoanGateway
    Business service1: A value of 4.9 or less causes the message to be routed to the ManagerLoanReview business service.
    Business service2: A value of 5.0 or greater causes the message to be routed to the NormalLoan business service.
    When i send the request message, so that it gets routed from proxy service to one of the business service than it gives following error.
    Request Document
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
    <soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
    </soap:Header>
    <soapenv:Body>
    <exam:processLoanApp xmlns:exam="http://example.org">
    <loanRequest xsi:type="java:LoanStruct" xmlns:java="java:normal.client" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <!--Optional:-->
    <java:Name>Smith</java:Name>
    <!--Optional:-->
    <java:SSN>1234567</java:SSN>
    <!--Optional:-->
    <java:Rate>4.1</java:Rate>
    <!--Optional:-->
    <java:Amount>9000000</java:Amount>
    <!--Optional:-->
    <java:NumOfYear>10</java:NumOfYear>
    <!--Optional:-->
    <java:Notes>Manager Loan Application Review Service</java:Notes>
    </loanRequest>
    </exam:processLoanApp>
    </soapenv:Body>
    </soapenv:Envelope>
    Response Document
    The invocation resulted in an error: .
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
    <soapenv:Body>
    <soapenv:Fault>
    <faultcode>soapenv:Server</faultcode>
    <faultstring>
    BEA-380002: Tried all: '1' addresses, but could not connect over HTTP to server: 'localhost', port: '7021'
    </faultstring>
    <detail>
    <con:fault xmlns:con="http://www.bea.com/wli/sb/context">
    <con:errorCode>BEA-380002</con:errorCode>
    <con:reason>
    Tried all: '1' addresses, but could not connect over HTTP to server: 'localhost', port: '7021'
    </con:reason>
    <con:location>
    <con:node>RouteNode1</con:node>
    <con:path>request-pipeline</con:path>
    </con:location>
    </con:fault>
    </detail>
    </soapenv:Fault>
    </soapenv:Body>
    </soapenv:Envelope>
    Response Metadata
    <con:metadata xmlns:con="http://www.bea.com/wli/sb/test/config">
    <tran:headers xsi:type="http:HttpResponseHeaders" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:tran="http://www.bea.com/wli/sb/transports" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <http:Content-Type>text/xml; charset=utf-8</http:Content-Type>
    </tran:headers>
    <tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">1</tran:response-code>
    <tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
    </con:metadata>

    I have the same problem and I'm not able to telnet localhost on port 7021. How can I change this port number I think that port must be 7001, it is correct?Examples server domain is pre-configured for port 7021. The samples domain will have the examples properly deployed in this domain out of box. You dont need to change any thing in {BEA_HOME}\osb_10.3\samples\domains\servicebus\config.
    I doubt this has to do something with firewall . Check the last statement in the log after starting the domain.
    <May 19, 2009 8:50:09 AM IST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.177.242.25:7001 for protocols iiop, t3, ldap, snmp, http.>
    <May 19, 2009 8:50:09 AM IST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, http.>
    <May 19, 2009 8:50:09 AM IST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "AdminServer" for domain "base_domain" running in Development Mode>
    <May 19, 2009 8:50:09 AM IST> <Warning> <Server> <BEA-002611> <Hostname "mneelapu", maps to multiple IP addresses: 10.177.242.25, 127.0.0.1>
    <May 19, 2009 8:50:09 AM IST> <Warning> <Server> <BEA-002611> <Hostname "XYZ-v411-10-177-242-25.oracle.com", maps to multiple IP addresses: 10.177.242.25, 127.0.0.1>
    <May 19, 2009 8:50:09 AM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
    <May 19, 2009 8:50:09 AM IST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
    What are you seeing in your log file?
    Edited by: mneelapu on May 19, 2009 9:58 AM

  • I'm using a Mac.  I "upgraded" to LR5 from LR4.  I do not want to be a member of the "Creative Cloud".  I just want to use the software I purchased, specifically to upload to my SmugMug account.  Is there a way to use an add-on to do this?  Aperture and L

    I'm using a Mac.  I "upgraded" to LR5 from LR4.  I do not want to be a member of the "Creative Cloud".  I just want to use the software I purchased, specifically to upload to my SmugMug account.  Is there a way to use an add-on to do this?  Aperture and LR4 were easy but I'm finding it impossible without subscribing to CC.

    Sorry, maybe I don't understand, but why do you feel compelled to subscribe to CC if you already have a permanent Lightroom 5 licence?
    For the SmugMug plugin, a simple Google search ("smugmug lightroom plugin") gives this link to download the plugin:  http://help.smugmug.com/customer/portal/articles/121321
    Another way is to click the button "Find more services online..." in the the Publish Service section of Lightroom, and to search for SmugMug in the Adobe Add-ons portal; you will find a link to the latest plugin: https://creative.adobe.com/addons/products/1755

  • How to enable the SharePoint 2010 and 2013 Developer Dashboard for specific WebApplication or Sitecollection?

    How to enable the SharePoint 2010 and 2013 Developer Dashboard for specific Web Application or Site collection(not for all Web Application)?
    Vishal Goyal

    Hi Vishal,
    I don't think there is option for specific site collection or web application,but there is option of enabling developer dashboard on specific master pages and that is one on of the way you could do it.
    look article on below link to enable developer dashboard on specific master pages
    https://msdn.microsoft.com/en-us/library/office/ff512745%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
    Let me know if this helps.
    Thanks
    Bhism 

  • Obtaining the full file path specification from Flash Movie and QuickTime icons?

    How do you obtain the full file path specification from Flash
    Movie and QuickTime icons? I want the path and the file name that
    is contained in these icons. I am using a "dive" to run through the
    icons of a file, and when I come upon these two types of icons, I
    want to obtain the above information that is contained in them. I
    certainly can look in the property dialog box to get this info, but
    there are many icons in these files, and I want to generate a list
    of info based upon the various types of icons that I am processing.
    Thanks

    > How do you obtain the full file path specification from
    Flash Movie and
    > QuickTime icons? I want the path and the file name that
    is contained in
    > these
    > icons. I am using a "dive" to run through the icons of a
    file, and when I
    > come
    > upon these two types of icons, I want to obtain the
    above information that
    > is
    > contained in them. I certainly can look in the property
    dialog box to get
    > this
    > info, but there are many icons in these files, and I
    want to generate a
    > list of
    > info based upon the various types of icons that I am
    processing. Thanks
    >
    For Flash
    Trace(GetIconProperty(iconID, #pathName))
    for QuickTime
    Trace(GetIconProperty(IconID, #filename))
    For full scripting reference for each of these sprites, open
    up the
    Properties panel for each sprite and press the Help button
    that appears on
    the properties page ... or else navigate to these folders for
    the Flash and
    QT help
    C:\Program Files\Macromedia\Authorware
    7.0\xtras\FlashAsset\Help
    C:\Program Files\Macromedia\Authorware
    7.0\xtras\QuicktimeAsset\Help
    You don't want to know how many times I asked Macromedia to
    stop hiding that
    Help!
    Steve
    http://twitter.com/Stevehoward999
    Adobe Community Expert: eLearning, Mobile and Devices
    European eLearning Summit - EeLS
    Adobe-sponsored eLearning conference.
    http://www.elearningsummit.eu

  • Logic 10.1 for a specific project; there is no mixer and the display is completely erratic.

    Logic 10.1 for a specific project; there is no mixer and the display is completely erratic.  For other projects it's working for now.  Please help

    Try this Safari5.1 from the installer package
    http://www.filefactory.com/file/cc9005d/n/Safari.pkg.zip
    The download worked better with Firefox not sure why. At the bottom of the page after the captcha>> slow down load is the Free link,  it took about 4 minutes to download on my test.

  • I have new memory modules, 2x2 2GB DDR2 --800 SO DIMM0 to install in I-Mac early2008 ,currently with 1 GB DDR2 SDRAM. How do I find the memory slots ? I have the 4GB replacement modules from Crucial and general instr's., not specific to I-Mac.

    I have new memory modules, 2x2 2GB DDR2 --800 SODIMM MAC to install  into I-Mac early2008 ,currently with 1 GB DDR2 SDRAM. How do I find the memory slots ? I have the 4GB replacement modules from Crucial and general instr's., not specific to I-Mac.

    https://www.ifixit.com/Guide/iMac+Intel+24-Inch+EMC+2111+RAM+Replacement/5196

  • Disabling the HTTP TRACE and TRACK Methods

    Greetings,
    Due to a security audit, I need to have the proxy reject requests containing the HTTP TRACE or TRACK methods. I have a proxy set up which listens on port 80 and simply redirects all requests to another proxy, which only accepts requests on 443. I thought that I would start by disabling TRACE/TRACK in the port 80 proxy. Here is a portion of my obj.conf for the port 80 proxy:
    <Object name="default">
    AuthTrans fn="match-browser" browser=".*MSIE.*" ssl-unclean-shutdown="true"
    <Client method="TRACE">
    Service fn="deny-service"
    </Client>
    <Client security="off">
    NameTrans fn="redirect" from="/" url="https://www.site.com/Site"
    </Client>
    PathCheck fn="url-check"
    ObjectType fn="block-ip"
    Service fn="deny-service"
    AddLog fn="flex-log" name="access"
    </Object>
    It seems that the server simply ignores the first <Client> tag and processes the second one. Even when I telnet to the proxy on port 80, and issue a "TRACE /" request, all it does is redirect me to www.site.com/Site. Can someone point me in the right direction here? Where is the best or proper place to intercept requests involving these methods?
    Thanks,
    Chris

    Please try moving the <Client> tag to the protocol-specific object. For example:
    <Object ppath="http://.*">
    <Client method="TRACE">
    Service fn="deny-service"
    </Client>
    Service fn="proxy-retrieve" method="*"
    </Object>

  • I bought a Apple Care Protection Plan for a Iphone 4, but now i dont need it. Can i keep it and use it with a new model Iphone (iphone 5 when it comes out) or are the protection plans generation specific

    I bought a Apple Care Protection Plan for a Iphone 4, but now i dont need it. Can i keep it and use it with a new model Iphone (iphone 5 when it comes out) or are the protection plans generation specific?

    See Here for
    Transfer coverage of an AppleCare agreement
    http://support.apple.com/kb/HE58

Maybe you are looking for