OSB -How to communicate with a Asynchronous SOAP Service using OSB

Hi,
I am new to OSB and I need some help in working with Asynchronous SOAP Service.
Test Case : OSB --> Proxy Service --> Business Service-->External Service pointing to Asynchronous service WSDL.
While testing the proxy service using sb console i don't get a response back.
After some googling I found out the following:
->We need to create another Proxy service for listening to callback from that Asynchronous service.
->Setting the "WS-replyTo" in header variable while sending the initial request to Business Service(pointing to Asynch wsdl).
Even after this I am not getting some response.
Questions :
1. Can someone let me know in detailed way(end to end) what has to be done to achieve this ?
2. The Asynch wsdl exposes only one port in the <service> tag ie., which is haing the binding related to "process" operation. ( but not processCallback operation)
So in this case how do i make my responseProxy service listen to callback port ? When I try to do I just see the process binding only.
Thanks and Regards,
Sridhar.

Vernetto,
I am not sure about the publish, but yes we can do this without JMS also. Please refer to this post which is quite helpful which routes back to a proxy service.
http://eelzinga.wordpress.com/2010/03/23/oracle-service-bus-invoke-asynchronous-webservices/
Regards,
Sridhar.

Similar Messages

How to communicate with third party bluetooth device using LAbVIEW

Hi
      I am trying to communicate with a third party bluetooth device using LabVIEW, I am using a bluetooth dongle. I am able to discover the device and able to open the connection by specifying the service as serial port. But after that when I am trying to read and write data between LabVIEW and the bluetooth device (using Bluetooth Read & Bluetooth Write functions) its not happening.
Dose anybody faced same kind of issue if so kindly guide me, this is first time I am using Blutooth protocol.
Regards
Visuman

Hi,
I am able to talk with bluetooth / serial devices by using Labview protocol (not Wii dll). These are steps:
      Discover the bluetooth device in range (Bluetooth dicover.vi)
      Get the address of the device
      Pass device address to Bluetooth RFCOMM Service Discovery.vi to get service list
      Pass channel and uuid to Bluetooth open connection
      After that do write and read (Bluetooth Write / Bluetooth read).
I hope it works for you.
Take care
tp

How to communicate with a remote application that uses http post to request connection

Ok, I will try to make this simple as to avoid any
confusion.
I am trying to receive connection requests from remote applications installed on user pc's.
The application uses POST method to send the request to connect to my database, and if required update some tables.
The application is not a webpage. I have no access to the internal workings of the application nor do I have any specific information about how it sends its POST. I am sure of the following:
The app will POST to my .cfm page
"IsConnectionAllowed" = "yes"
This is asking my cfm page if its ok to connect. I would need to use a <cfif> to verify the the first part of the POST is in fact
"IsConnectionAllowed" = "yes"
If this returns true, (the app also uses to POST to pass "username" and "password") my .cfm page will then perform a query and check the username and password against the database. If a matching record is found, the application expects my page to reply with
"#Answer# OK- connected;"
Once the answer is given the application will then respond with data to insert or update my tables.
Now, I know how to do the queries and update tables etc, but I have never received data from an application before.
I tried using the <cfform> tag with a mehod of GET, and then trying to send my reply with <cfoutput>, but that didn't work. The application doesn't give any feedback or error messages. It either connects or not.
I also tried the <cfhttp> tag, but that didnt work either. I am not very experinced with coldfusion. I used it years ago and am just getting back into it.
I am sure this is a pretty easy thing to do, but my methods arent working.
Using the above information, can somone please show me how I would accomplish this communication? I can then use the same method to retrieve the data for my table updates and queries.
Here is a sample of what I have already tried:
<cfform method="get">
<cfif>
"IsConnectionAllowed" = "yes"

<cfoutput>#Answer# Ok - connected;</cfoutput>
<cfelse>

<cfoutput>#Answer# Not connected;</cfoutput>
</cfif>
</cfform>
BTW, I have examples of this being done using .php and .asp. I need to do this using .cfm. I can post the either the .php or.asp code if it will be helpful in converting the function into a .cfm page.

Thanks Fernis.
That code allowed me to connect!
I have an error on the remote application, but I think thats due to the fact that I commented out the database connection and query strings. As I am mostly concerned with connection at this point, I just wanted to test that my cfm page will recognise the POST request and send the right answer, In this case
##Answer## Ok - connected;
That worked perfectly and the application received the ok to connect.
I can now use your code as a base to carry on with my database connection and update query.
I can't thank you enough. I wouldnt have figured that out in a million years of trial and error.
I knew it was simple though. I was over thinking it.
I do have one last question though... In the code you presented you have
<cfif structKeyExists(Form,"isConnectionAllowed") AND form.isConnectionAllowed EQ "yes">
Can you you explain this structKeyExists(Form,"isConnectionAllowed")
I have never seen this before. Why the Form followed by a comma? I am guessing you are asking if there is an element in the POST called "isConnectionAllowed". Is that correct? If so, do I not need to do that for each POST'ed element such as username, password, and each of the other fields that will be updated in the session?

How to communicate with another applet in different frame?

Hello,evryone
How to communicate with another applet in different frame?
Can you give some advices?
thank you!
zhongboqing

i faced this problem one year ago.It would be something like that:
first you have to get the applet context 'getAppletContext()' (which is the current frame).
Then get parent of that context 'getParent()' (which is the browser context).
Then u can access the desired frame by its name. Finally you can access the desired applet located within this frame by

Does any one know how to communicate with thunderbolt or J.D.Edwards Oneworld?

Hi,
Does any one know how to communicate with thunderbolt or J.D.Edwards Oneworld through LabVIEW ? Do I need to use database connectivity toolkit? Can i do it without it?
Thanks

Hi Atul,
we have made a application which uses Oneworld. We didn't use the database connectivity tool because we used ODBC and SQL.
We have some VIs to do database connectivity using ODBC functions. So you have to know SQL as language and the ODBC functions. If you do not have this knowledge the database connectivity toolkit will make it easier for you.
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

How Bridge communicates with third party applications?

Hi,
Is it possible to communicate between Adobe Bridge and a third party application using Bridge SDK?
I want to learn how Bridge can communicate with other application? Bridge SDK have samples that explain how Bridge communicates with other Adobe applications like Photoshop and Indesign. Can anyone guide me or provide me a sample where Bridge communicates with a third party application?
Thanks.

As an example, this shows one way of getting a list of selected files from Bridge via Photoshop using C#
using System;
using System.Collections;
using ps = Photoshop;
namespace getBridgeFiles
    class Program
        static void Main(string[] args)
            ps.ApplicationClass app = new ps.ApplicationClass();
            String Code = "var fileList;"+
"if ( BridgeTalk.isRunning( 'bridge' ) ) {"+
"var bt = new BridgeTalk();"+
"bt.target = 'bridge';"+
"bt.body = 'var theFiles = photoshop.getBridgeFileListForAutomateCommand();theFiles.toSource();';"+
"bt.onResult = function( inBT ) { fileList = eval( inBT.body ); }"+
"bt.onError = function( inBT ) { fileList = new Array(); }"+
"bt.send(8);"+
"bt.pump();"+
"var timeOutAt = ( new Date() ).getTime() + 5000;"+
"var currentTime = ( new Date() ).getTime();"+
"while ( ( currentTime < timeOutAt ) && ( undefined == fileList ) ) {"+
"bt.pump();"+
"$.sleep( 100 );"+
"currentTime = ( new Date() ).getTime();"+
"}}"+
"if ( undefined == fileList ) {"+
"fileList = new Array();}"+
"fileList = decodeURI(fileList.toString());";
            String RC = app.DoJavaScript(Code, null, null);
            ArrayList list = new ArrayList();
            list.AddRange(RC.Split(new char[] { ',' }));
            for (int index = 0; index < list.Count; index++){
                Console.WriteLine(list[index]);
            Console.ReadLine();

How to communicate with a server ?

Hello.
I'm an intern trying to find a RIA client to use with a Java application server. The server provides two ways to access data :
- a HTTP servlet that deals with XML
- a web service
I can't find information about how to communicate with a server using JavaFX 2, so can you try to explain it to me ?
I'm sorry if what I ask is stupid, but I'm not very familiar with these things, I'm just a student.
Thank you.

Hi,
communicate with a server is not JavaFX speciffic. You can use any "Java way" to access web-services or http requests. Try Axis2, it creates you the client API from the WSDL (the webservices on your server should provide the WSDL), than you can use this created client API to access the web-service in your JavaFX application. (see: http://people.apache.org/~ruchithf/hw-axis2/). You should be aware that by default you are working on one Application Thread (JavaFX as well as Swing and SWT), so when your first poc. is running you should use the javafx concurrent api, to create non blocking requests (http://docs.oracle.com/javafx/2/threads/jfxpub-threads.htm).
Andy

How outlook communicate with exchnage server 2013/2010/2007

when i am creating a outlook profile for any user to access the mail box from exchange server. on that time how outlook communicate with exchange server.
Abp

Hi paul440,
Thank you for your question.
If we have configured autodiscovery correctly, outlook will connect Exchange CAS server by autodiscovery, autodiscovery will direct outlook to connect correct CAS server by user’s mailbox location. For Example, if the user mailbox located on Exchange 2010,
outlook will connect Exchange 2010 CAS. if the user mailbox located on Exchange 2013, outlook will connect Exchange 2013 CAS.
We could refer to the following link:
https://technet.microsoft.com/en-us/library/bb310763(v=exchg.141).aspx
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim

How to deal with credentials for external applications using a Java Client/

Hi Guys,
This is the case. I am integrating an external application with an ADF Application. I have implemented some programmatic ViewObjects that are being filled up by a REST Java Client Wrapper. Everything is working fine but the issue is that the credentials the wrapper is using are hard coded inside the java class. I am thinking to ask for the credentials at the beginning of my taskflow and then store them somewhere and use them then to create my client wrapper (passing them in the constructor).
However, I don't know if my approach is good and I would like you to share your experiences or how to deal with this.
Regards

You can use Credential Store Framework to store the credentials securely in the weblogic server instead of hardcoding in the java class.
The Credential Store Framework:
- enables you to manage credentials securely
- provides an API for storage, retrieval, and maintenance of credentials in different back-end repositories
Check the documentation on CSF API -
http://docs.oracle.com/cd/E29505_01/core.1111/e10043/devcsf.htm
Major Steps -
1. Create a credential map and key in em console to store the password (http://docs.oracle.com/cd/E25054_01/core.1111/e10043/csfadmin.htm)
2. Use CSF API to retrieve the stored password
3. In jazn-data.xml give permissions to access CSF key and map

How can I filter information to soap service?

I have an ESB Application in which I am getting some information from File Adapter.Now I want to send this info to another adapter as well as to invoke a soap service using a single routing service.But I am getting error.If i can try to use filter here for soap service which filter function can be used?

So If I understand correctly, you want to have an inbound file adapter, its result being sent to a routing service (which is automatically created). This routing service should then invoke a soap service and invoke another adapter. Is that correct? If so, you can create two routing rules for the routing service operation.
What error do you get? Can you be more specific?
For what purpose do you want to use the filter in this scenario?
Regards, Ronald

SSL Error while Consuming Java build SOAP services using Dotnet Console App

Hi, I want to consume a SOAP service developed in JAVA. I don't have any control on Service side. I have to just consume the SOAP service using my client Application which is in DotNet Console Application using C#. Here is the detail about the service:
1. The service has SSL configured.
2. End point looks like: https://xyz.com:443
3. I am able to connect the service using SOAP UI Tool by configuring the Tool with the certs given by Java developer.
4. Basically there are two certs used, one for "client authentication" purpose and the second cert is for "WS security" purpose.
5. When i add the WSDL to my client app as a service Reference, the generated App.config file looks as shown below:
<configuration>
system.serviceModel>
<bindings>
<basicHttpBinding>
<binding name="Hello_HTTPBinding">
</binding>
</basicHttpBinding>
</bindings>
<client>
<endpoint address="http://localhost:8080/" binding="basicHttpBinding"
bindingConfiguration="Hello_HTTPBinding"
contract="Proxy_Hello" name="Hello_HTTPPort" />
</client>
</system.serviceModel>
</configuration>
6. Basically I need to pass two certs, one cert used for "client authentication" purpose and the second cert is used for "WS security purpose".
7. I have changed the above client configuration as below marked in RED color text:
<configuration>
system.serviceModel>
<bindings>
<basicHttpBinding>
<binding name="Hello_HTTPBinding">
<security mode="TransportWithMessageCredential" >
<transport clientCredentialType="Certificate" proxyCredentialType="Basic" realm="" />
<message clientCredentialType="Certificate" algorithmSuite="Basic128" />
</security>
</binding>
</basicHttpBinding>
</bindings>
<client>
<endpoint address="https://xyz.com:443"
binding="basicHttpBinding"
bindingConfiguration="Hello_HTTPBinding"
contract="Proxy_Hello" name="Hello_HTTPPort" behaviorConfiguration="NewBehavior"/>
</client>
<behaviors>
<endpointBehaviors>
<behavior name="NewBehavior">
<clientCredentials >
<clientCertificate findValue="clientxyz.com" storeLocation="CurrentUser" storeName="My" x509FindType="FindBySubjectName" />
<serviceCertificate>
<defaultCertificate findValue="helloabc.com" storeLocation="CurrentUser" storeName="My" x509FindType="FindBySubjectName"/>
</serviceCertificate>
</clientCredentials>
</behavior>
</endpointBehaviors>
</behaviors>
</system.serviceModel>
</configuration>
8. I am assuming the cert required for WS security will be passed using in<serviceCertificate> element, but not fully sure....correct me if I am wrong.
9. By creating proxy object of the service when I am trying to call the required method I am getting this Error: "Could not establish
secure channel for SSL/TLS with authority "******xyz.com."
10. Its working perfect in SOAP UI Tool, generating the Raw XML as shown below in ORANGE color Text:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:urn="urn:gw-headers-100" xmlns:urn1="urn:gw-util-100">
<soapenv:Header><wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wsse:BinarySecurityToken EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary" ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3"
wsu:Id="X509-35309F239B754D9BA414230227616161">
aaaaaaaaaaaaaaaaabbbbbbbbbbbbbbbbbccccccccccccccccccccc********dddddddddddd*****eeeeeeeeee
</wsse:BinarySecurityToken>
<ds:Signature Id="SIG-2" xmlns:ds="http://www.w3.org/2000/09/xmldsig#">
<ds:SignedInfo>
<ds:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#">
<ec:InclusiveNamespaces PrefixList="soapenv urn urn1" xmlns:ec="http://www.w3.org/2001/10/xml-exc-c14n#"/>
</ds:CanonicalizationMethod>
<ds:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1"/>
<ds:Reference URI="#id-1">
<ds:Transforms>
<ds:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#">
<ec:InclusiveNamespaces PrefixList="urn urn1" xmlns:ec="http://www.w3.org/2001/10/xml-exc-c14n#"/>
</ds:Transform>
</ds:Transforms>
<ds:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/>
<ds:DigestValue>
abcabcabcabc******gggggg
</ds:DigestValue>
</ds:Reference>
</ds:SignedInfo>
<ds:SignatureValue>gggggg888******8sdsdsdss</ds:SignatureValue>
<ds:KeyInfo Id="KI-38488AAAA222">
<wsse:SecurityTokenReference wsu:Id="STR-ggggjj57557575">
<wsse:Reference URI="#X509-74747477" ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3"/>
</wsse:SecurityTokenReference>
</ds:KeyInfo>
</ds:Signature>
</wsse:Security>
</soapenv:Header>
<soapenv:Body wsu:Id="id-1" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<urn1:xxxxxxx>
</urn1:xxxxxx>
</soapenv:Body>
</soapenv:Envelope>
11. Using Dotnet Tracing I am able to see the Request XML generated from the console Application as shown below in BLUE color text: But getting the SSL error as: Could not establish secure channel
for SSL/TLS with authority "******xyz.com.
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<s:Header>
<o:Security s:mustUnderstand="1" xmlns:o="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<u:Timestamp u:Id="_0" xmlns:u="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<u:Created>2015-02-04T04:19:29.825Z</u:Created>
<u:Expires>2015-02-04T04:24:29.825Z</u:Expires>
</u:Timestamp>
<o:BinarySecurityToken>

</o:BinarySecurityToken>
<Signature xmlns="http://www.w3.org/2000/09/xmldsig#">
<SignedInfo>
<CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"></CanonicalizationMethod>
<SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1"></SignatureMethod>
<Reference URI="#_0">
<Transforms>
<Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"></Transform>
</Transforms>
<DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"></DigestMethod>
<DigestValue>aaaaaa****dddddd=</DigestValue>
</Reference>
</SignedInfo>
<SignatureValue>ssssddddd888fffff****=</SignatureValue>
<KeyInfo>
<o:SecurityTokenReference>
<o:Reference ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3" URI="#uuid-93e09c54-aee8-4f45-a8a4-d63d8a2d63fb-1"></o:Reference>
</o:SecurityTokenReference>
</KeyInfo>
</Signature>
</o:Security>
</s:Header>
</s:Envelope>
12. I want to Generate the Request XML from my Dotnet console Application simiar to the SOAP UI generated XML(refer #10).. Also want to get rid of SSL error....Appreciate your Suggestion..

Hi tksdotnet,
This forum is used to discuss the questions about the WCF web service, for java web services questions, it will be better to post in this forum:
#WCF, ASMX and other Web Services:
http://forums.asp.net/28.aspx/1?WCF+ASMX+and+other+Web+Services .
Thanks for your understanding.
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Example of Asynchronous Web Service Using Oracle APIs

Greetings,
Is there any tutorial, section or example of Oracle, that explains clearly, how to create an Asynchronous Web Service using Oracle APIs.
Thakns in advance for your help.-

Does this help:
http://niallcblogs.blogspot.com/2009/03/calling-async-bpel-process-from-jdev.html

How to communicate with HID USB device under windows XP with Labview

I have designed a EZ-USB FX2 device and I need to communicate with LabVIEW. I mean I just want to send and receive data. I don’t know how to achieve this goal.Someone have advised me to design a HID device,then use VISA Driver Development Wizards to generate driver(inf file).SO I defined it to a hid device .However when I connect my hid device to the computer, it will automatically be recognized as HID compliance device. I can’t to install the inf file driver. I wondered whether all HID devices will be acquiescently installed the drivers contained in the windows rather than use the inf file driver generated by VISA Driver Development Wizards? If so，what should I do next to communicate with HID USB device under windows XP with Labview? HOPE TO GET HELP!
KIVI

Hi,
I am working on a project using PIC18F4550 MCU and USB.
I would need to send and receive data from the MCU thru USB. I have uninstaled the HID and created a new NI-VISA driver for my MCU. this worked fine, and it did showed up in MAX
Unfortunately I was not able to receive data from the MCU, Just sending!
I thought to use HID.DLL but the way I need to use the functions inside the HID DLL is simply too much for me, I am not a PC programmer.
There is any kind of VI that is able to use HID.DLL to comunicate with external devices conected to PC thru USB?
Please Help
Andrei

How to communicate with swf in HTMLLoader

Hi,
How to communicate swf loaded through HTMLLoader in non-application sandbox with the application sandbox from where the HTMLLoader is created.
Regards,
Ahmed

> Hello Reo,
>
> That's right: You can schedule the syndication by
> using the auto syndication time (mdss.ini).
> Furthermore you have the choice not to syndicate
> records that didn't change. With other words: as long
> as no records have changed, nothing is syndicated.
> The settings are done in the "Map Properties" tab in
> the Syndicator.
> A third option could be to use the search criteria.
> By doing so, you e.g can specify just to syndicate,
> if a special flag (let's say a boolean value in MDM)
> has a true value.
>
> Greets,
> Andreas
Hi Andreas
I am in a situation where I need to schedule a syndication (batch) based on a value of MDM main table( conditional execution of syndication). Is it possible to automate MDM syndication server based on the search (previously created) and Map? This helps our project a lot. Thank you in advance.
Regards
Bala Pochareddy

How to communicate with different system on different network using WCF service

Hi,
I am using a WCF service that is accessed by different systems on same network. But systems on different networks are not able to access my WCF service. I have enabled tcp port also. But i can not resolve this issue. Please give the solution to the issue.
Regards,
Shanmugam M

Hi Vilas,
How you may communicate with you AIX server may very greatly depending on what is running on your server. Here is a link to another thread where Java calls and AppletView were discussed. It contains a link to the company that makes AppletView, so it may have some good information for you.
Also, if your customer suggested you use AppletView and they developed it, they would probably be your best bet for explaining it to you.
Hope this helps!
Spex
National Instruments
To the pessimist, the glass is half empty; to the optimist, the glass is half full; to the engineer, the glass is twice as big as it needs to be...

OSB -How to communicate with a Asynchronous SOAP Service using OSB

Similar Messages

Maybe you are looking for