OSB Monitoring with email alerts

Hi All,
I am using OSB to virtualize a business service. The service basically receives feed from external party using one-way messaging pattern. I want to raise an alert at the OSB proxy layer if I do not receive any message from the third party for the last five minutes. How to go about it.
Thanks

Hello,
You need to configure the SLA alert rule in the proxy which receives the message from third party. Alert rule should be based on message count. If you have a running OSB instance then go to the proxy service --> SLA Alert Rules tab, click on Add button (you need to start edit session), provide the values on the General configuration page and click next to go to Alert Rules Conditions Configuration page, and in simple expression fill -
Count - Message Count - < 1
Click on add. In Aggregation Interval, select the value 5 mins.
Go to the last and save and you are good to go.
Regards,
Anuj

Similar Messages

A problem with email alerts in management services of Azure portal

Hi,
I have created an alert with email notification on a custom performance counter using the management services of Azure portal.
Currently the alert is in active state (and has been so for several hours), but i haven't received any email.
Can someone please advise on this issue?
Thanks,
Roi

Do you have an endpoint for the service. To enable endpoint monitoring, go to the
dashboard page for the associated resource and edit the
Endpoints setting in the
monitoring section, see figure 1. If you have an endpoint, try disabling and enabling the alert in the management tab.
figure 1.
Johnny Coleman [MSFT] Any code posted to this Forum is [As-Is] With No Warranties

Problems with email alerts in OEM ( 10g )

Gurus,
I have setup the notification for the listener availability and I am having problems with getting the emails when the listener is down. I manually tested the setup by stopping the listener from the command prompt on the server and I don't see any email alerts, but the email alerts come after the listener is started back again from the prompt. I am interested in seeing the alerts when the listener goes down, any info on this is appreciated.
Thanks.

Thanks for your response. I have selected "yes" for both Up and down in your alert setup and still no luck. I did check the field where it says about sending email. Again when I stopped the listener alert didn't fired up, but it fired up after starting the listener.

Help with email alert using email_alertcdf from download

We are attempting to get the email alert function working. We have downloaded the files into their proper locations, ensured the JRE is installed, registered the function, updated the .udf and are attempting to execute a script.The script errors out with an "Unexpected End of File reached" error.Any help is greatly appreciated!

Endperform wrote:Are you looking to keep your email on the server at all times? If so, I suggest looking into setting up IMAP on your home server which will do what you need.
Endperform: yes that is the plan. Do still keep getmail to fetch the pop3 email from my ISP and the setup IMAP so 'forward' onto the Arch client?
Thanks for the reply.
pyther wrote:I'd have to second what endperform said, if you want to keep you mail on your server at all times, just check out IMAP. Also you can organize your mail in folders with imap
pyther: Thanks for confirming what I've googled.
JTD

CCMS Configuration - Central Monitoring and Email Alerts with Solution Mgr

I am trying to configure my CCMS alerts on my satellite systems to be linked into the Solution manager system (acting as the CEN monitoring node). If I have already setup my RZ20 alerts, is there a way I can just link these into Solution Manager.
Thanking you for your suggestions

Try setting up the monitoring RFC connections in SMSY. Once those are setup, you can pull the CCMS data in and view within tran SOLUTION+MANAGER.
If you need more detail, just update this message.
Thanks,
J. Haynes

Plain Http adapter Monitoring with CCMS / Alerting framework

Hello all,
Can you explain me the optimal way to monitor process using plain http adapter (Sender AND Receiver).
My goal is to push issue information as soon as possible to monitoring team (via CCMS) when the process is in error.
During my tests, I ve had a lot of messages with ICM HTTP error 110 but Integration engine did not trigger any alert.
Thanks for your help.

Hi,
Check this link for ICF trace.
http://help.sap.com/saphelp_webas620/helpdata/en/2d/64d041e74911d6b2e400508b6b8a93/content.htm
/people/arulraja.ma/blog/2006/08/18/xi-reliable-messaging-150-eoio-in-abap-proxies
/people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
regards
Aashish Sinha
PS : reward points if helpful

Print Queue Status Monitor with Email

I have a brand new Windows Server 2012 R2 Datacenter virtual server that is setup as a print server. I saw the custom filters in the Print Management console but found out that notifications only work with that console open. Since I'm not logged
into that machine all the time, I need a powershell script that can do what the custom filters do in the Print Management console. Here's what I'm looking for:
1. When the print server starts the script starts. This script should always stay active.
2. The script polls the print queues for a change in status to anything other than Ready every 5 minutes or so.
3. If the printer name contains "CC2", then email certain people the status of that particular printer. Only email them once so as to not spam them with constant emails (maybe 1 email per day per status change).
So basically I'm looking to email my customer service department if one of their printers goes to a status of anything other than Ready. Is something like this possible with Powershell?

My scripts compares the customer service printers (printer names starting with CC2) status every 5 minutes. If the status has changed and there are Offline printers then customer service gets an email. I'm using Task Scheduler to start the script
at 6:00am every day and the script will quit around 11:00pm. It's not very elegant but it will get the job done. Thanks for all your help!
# Time limit when the script expires
$Limit = (Get-Date).AddDays(1)
$SleepSeconds = 300
$PreviousStatus = @()
while ((Get-Date) -lt $Limit)
$CurrentStatus = Get-Printer -computername SERVER | Where {($_.PrinterStatus -ne "Normal") -and ($_.Name -Match "CC2")} | Select Name,PrinterStatus
if ($CurrentStatus)
if (Compare-Object $CurrentStatus $PreviousStatus -property Name,PrinterStatus)
# Establish Connection to SMTP server
$a = "<style>"
$a = $a + "TABLE{border-width: 1px;border-style: solid;border-color: black;border-collapse: collapse;}"
$a = $a + "TH{border-width: 1px;padding: 0px;border-style: solid;border-color: black;}"
$a = $a + "TD{border-width: 1px;padding: 0px;border-style: solid;border-color: black;}"
$a = $a + "</style>"
$filedate = get-date
$smtpserver = “smtp.gmail.com”
$msg = new-object Net.Mail.MailMessage
$smtp = new-object Net.Mail.SmtpClient($smtpServer )
$smtp.EnableSsl = $True
$smtp.Credentials = New-Object System.Net.NetworkCredential(“[email protected]”, “password”); # Put username without the @GMAIL.com or – @gmail.com
$msg.IsBodyHtml = $True
$msg.From = “[email protected]”
$msg.To.Add(”[email protected]”)
$msg.To.Add(”[email protected]”)
$msg.To.Add(”[email protected]”)
$msg.To.Add(”[email protected]”)
$msg.To.Add("[email protected]")
$msg.Subject = "Printer Status Errors $($filedate)"
$msg.Body = Write-Output -InputObject (Get-Printer -computername SERVER | Where {($_.PrinterStatus -ne "Normal") -and ($_.Name -Match "CC2")} | Select Name,PrinterStatus,Comment,Location,Portname) | ConvertTo-Html -Head $a
$smtp.Send($msg)
$PreviousStatus = $CurrentStatus
Start-Sleep -Seconds $SleepSeconds
if ((get-date).Hour -eq 23) {Exit}

How to set alert threshold and email alerts?

Hi!
I have configured Solution manager 3.2 to monitor
our R/3 systems.
I want to be able to set the threshold for tablespace
usage and be able to send an email if the usage
of the tablespace is 80% full.
Could anybody tell how to implement it?
Thanks!

Hi Christy:
There are different approaches to configure alerts, if you are using Solution Manager; I think you can benefit if you choose SolMan and the Central System (CEN) to handle all the monitoring and email alerting.
If this is the case, you will need to install the CCMS Agents on every satellite system in order to trigger remote alerts.
Let me know what is your idea and I can follow with you with the required steps.
Best Regards,
Federico G. Babelis
NetWeaver Certified Consultant
GAZUM Technologies S.A.
Consulting Services and Software Solutions
http://www.gazum.com
...download FREE Marketplace Manager at: http://www.gazum.com/products

WRVS4400N - Logging and Email Alerts when I use a VPN client - Firmware bug?

Hi folks -
I've got a problem with my WRVS4400N that has been dogging me for a long time now, and I'm finally fed up with the email alerts.
My wife has a VPN client for her work, on her laptop. It is nothing fancy, normal IPSec VPN, details on it I can get if needed, but it's just VPN.
My WRVS4400N is running 1.1.03 firmware, latest on the site. I have all VPN pass-throughs enabled. VPN connectivity for the wife works great, no problems that I'm aware of for her functionally.
The problem is, that I have logging turned on with email alerts. When my wife uses her VPN connection, I get flooded with alerts from the router with all sorts of goobly goo information. It's almost like there is a bug in the router firmware that is parsing information incorrectly.
Log levels are set to 0,1,2,3. Email alerts enabled. DoS threshold is 50, Log Queue is 100, Log Time is 60. SMTP information for my mail server populated of course, and Local Log enabled.
Below is a sample of the email body that gets sent. My wife has been using her VPN connection for about 3 hours tonight, and already I've been flooded with over 1000 emails.
Here's some body content:
Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LEN05 CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LEN07 CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENH CID=054619136 Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN† CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENy CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENv8 CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENW9 CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN† CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENy CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN@3 CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENQ1 CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN` CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENu CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENf CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENf CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN20 CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LEN43 CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN† CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENy CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENb CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENu CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENH CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LEN=CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENI CID=054619136 Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENI CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENE CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENE CID777216Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=w GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN@3 CID=054619136 Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN@3 CID=054619136Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENQ1 CID777216Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN` CID=054619136
Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 7
Does anyone have any ideas? This seems like a code bug to me, but how do I go about reporting to Linksys?
Of course, I can turn off email alerts, but then that defeats the purpose of the router being able to tell me when something is awry.
Any help would be appreciated!
Thanks,
Jesse T.

hay,
Nobody can test this?
nobody has a 5520?

Problem send email alert Monitor Server

Hi everybody
I've one problem with ColdFusion 8 on 3 servers, installed in multi-server configuration.
When i want to monitor servers with sending alert by mail, i 've an error in mail.log file :
"cfadmin@server-name failed to route the address"
I've check smtp relai configuration. All is OK.
I've read somewhere in Adobe documentation that this parameter (mail from) canno't be configured. But in other ColdFusion plateform, alert email are sending by a personalized field "cfadmin@final_client_domain".
Moreover, last year, the final client tell me that alert email sending work well...
I 've tryed to find the file who let-me personalise this option. Have you an idea ?
Thanks.
PS.: sorry for my english level.

I have not tried it, but perhaps it uses the same mechanism as the FQDN lookup. That can be infuenced by setting a JVM parameter: http://jochem.vandieten.net/2008/09/19/configuring-coldfusion-to-use-a-fqdn-in-the-cfmail- ehlo/

CC Monitoring to raise email alert.

Hi all,
Here in my scenario I need to check where the FTP server is offline or online, if its offline then I need to raise an alert through email to the user.
Is there any mechanism to monitor Communication channel so that I can raise an alert?
Please correct me if I am wrong.
Thanks in Advance,
Prasad.

Hi Check with these
For email alerts
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
/people/sap.user72/blog/2005/01/14/alert-management--improving-monitoring-of-your-landscape
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
You have to do SMTP Configuration for EMail and SMS.....
http://help.sap.com/saphelp_nw04/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm
Thanks !!

Need DAG Failover/ switchover monitoring email alerts

hello
I want to setup email alerts on exchnage 2010 DAG.
Like when a switchover happened
DAG mailbox failure
Can i set these with windows or i have take any third party utility

Hi,
Sometimes we need to know when a database failover to another server automatically, even though there are no problems for end users. To monitor database failover in DAG, you can check the following article.
Monitor Databases in DAGs
http://letsexchange.blogspot.com/2011/08/monitor-databases-in-dags.html
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Hope this helps.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

I am automating the process of sending appointment reminders to my clients. I started with an alert with an email in calendar using the clients email address as a custom entry in my me card in my contacts. this was resulting in three emails being sent wit

I am automating the process of sending appointment reminders to my clients. I started with an alert with an email in calendar using the clients email address as a custom entry in my me card in my contacts. this was resulting in three emails being sent with slightly different versions of the same address (see my previous post). Heating someone else's suggestion I created a workflow file to send an email and calling that file from an alert on my calendar. This is working and sends only one email to the client.
My calendar is on I cloud and I access it from three different computers so I can keep my appointment calendar current. The files that send the email only exist on one computer. My other computers show error messages when those emails get sent. It seems that each computer wants to send the email. It's a small problem but is there a way that I could not get those alerts.
But appreciate any thoughts about this. It seems like both problems might be related to the iCloud system.
Thank you in advance,
Michael

Good work, catch so far Michael, does seem to be a "feature" of iCloud syncing, not sure what you could do to disable it.

I would like to have an email account that is password-protected that I can access on my Mac, Iphone and Ipad, separate from the Mail application, with an alert button that indicates unread messages

I would like to have an email account that is password-protected that I can access on my Mac, Iphone and Ipad, separate from the Mail application, with an alert button that indicates unread messages

Try a search... I'm sure if you put forth a little effort you can find a solution that will work for you.

I would like to have an email account that is password-protected that I can access on my Mac, Iphone and Ipad, separate from M, with an alert button that indicates unread messages

I would like to have an email account that is password-protected that I can access on my Mac, Iphone and Ipad, separate from M, with an alert button that indicates unread messages

Try a search... I'm sure if you put forth a little effort you can find a solution that will work for you.

OSB Monitoring with email alerts

Similar Messages

Maybe you are looking for