OSD Tasksequence from OS failing 0x80070002

Hello,
I have read other threads about the network access account, or the NTFS share permissions not being correct. Problem is I have 1 model out of 10 that are failing with the below error, so I am unsure what the real problem is here. Other computers have been
loaded today off the same DP that these systems are getting their files from. Anyone have any other thoughts on the error?
Unable to load store at C:\boot.ini TSManager 3/20/2014 11:01:08 AM 4028 (0x0FBC)
Failed to install boot image.
The system cannot find the file specified. (Error: 80070002; Source: Windows) TSManager 3/20/2014 11:01:08 AM 4028 (0x0FBC)
Failed to install boot image CM100002.
The system cannot find the file specified. (Error: 80070002; Source: Windows) TSManager 3/20/2014 11:01:08 AM 4028 (0x0FBC)
Failed to reboot the system. Error 0x(80070002) TSManager 3/20/2014 11:01:08 AM 4028 (0x0FBC)
Failed to initialize a system reboot.
The system cannot find the file specified. (Error: 80070002; Source: Windows) TSManager 3/20/2014 11:01:08 AM 4028 (0x0FBC)
Fatal error is returned in check for reboot request of the action (Restart in Windows PE).
The system cannot find the file specified. (Error: 80070002; Source: Windows) TSManager 3/20/2014 11:01:08 AM 4028 (0x0FBC)
An error (0x80070002) is encountered in execution of the task sequence TSManager 3/20/2014 11:01:08 AM 4028 (0x0FBC)

Encryption is not a factor on this device. It could be a permissions thing though. We do have some software where we have to do some stupid stuff with NTUSER.Dat on ~350 machines. Doesn't the task sequence use the Computer System account or does it use the
Network Access Account that I have specified? If it is the Network Access Account that could make sense if it inherits the jacked up NTUSER.Dat in the default profile.

Similar Messages

  • RegReadDWord failed; 0x80070002 error in smsdpprov.log

    [51C][Mon 05/05/2014 15:30:13]:RegQueryValueExW failed for Software\Microsoft\SMS\DP, PxeInstalled
    [51C][Mon 05/05/2014 15:30:13]:RegReadDWord failed; 0x80070002
    [51C][Mon 05/05/2014 15:30:13]:PXE provider is not installed.
    I have these errors in my logs.
    I don't use PXE and my site isn't PXE enabled.
    Is there a way to stop it from creating these errors in the smsdpprov.log?

    Hi,
    Please check Distmgr.log to see if there are any helpful information.
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Data import from EBS failed via FDMEE in fdm . Getting error message as "Error connecting to AIF URL.

    FDM Data import from EBS failed via FDMEE after roll back the 11.1.2.3.500 patch . Getting below error message in ERPI Adapter log.
    *** clsGetFinData.fExecuteDataRule @ 2/18/2015 5:36:17 AM ***
    PeriodKey = 5/31/2013 12:00:00 AM
    PriorPeriodKey = 4/30/2013 12:00:00 AM
    Rule Name = 6001
    Execution Mode = FULLREFRESH
    System.Runtime.InteropServices.COMException (0x80040209): Error connecting to AIF URL.
    at Oracle.Erpi.ErpiFdmCommon.ExecuteRule(String userName, String ssoToken, String ruleName, String executionMode, String priorPeriodKey, String periodKey, String& loadId)
    at fdmERPIfinE1.clsGetFinData.fExecuteDataRule(String strERPIUserID, String strDataRuleName, String strExecutionMode, String strPeriodKey, String strPriorPeriodKey)
    Any help Please?
    Thanks

    Hi
    Getting this error in ErpiIntergrator0.log . ODI session ID were not generated in ODI / FDMEE. If I import from FDMEE its importing data from EBS.
    <[ServletContext@809342788[app:AIF module:aif path:/aif spec-version:2.5 version:11.1.2.0]] Servlet failed with Exception
    java.lang.RuntimeException
    at com.hyperion.aif.servlet.FDMRuleServlet.doPost(FDMRuleServlet.java:76)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
    at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  • Downloads from itunes fail - error code 8003 - what does that mean, or more importantly, how do I get what I paid for?

    Downloads from itunes fail - error code 8003 - what does that mean, or more importantly, how do I get what I paid for?

    Try the troubleshooting for that error code on this page : iTunes: Advanced iTunes Store troubleshooting - Apple Support (search for '8003' on the page, it's just below half-way down)

  • I have like five GB's of ghost data (data the device claims is not there but it is still taking up space) on my I pad 2 from a failed movie download attempt. How do I fix that with out resting my iPad? I have only 1GB left of storage

    I have like five GB's of ghost data (data the device claims is not there but it is still taking up space) on my I pad 2 from a failed movie download attempt. How do I fix that with out resting my iPad? I have only 1GB left of storage
    The movie had gotten to the point that I could watch it all the way through but it still said processing and got stuck at that point and when I turned off the wifi to try to restart it, it deleted its-self but did not free up any of the storage It was taking up
    Restarting my iPad does not help
    Some thing similar also happened to my old laptop when trying to download the iOS 5 update to my laptop when it came out. It kept getting disconnected and every time it would try to start over and act like what had already been downloaded was not there though it was still taking up the storage space.
    And it continued repeating until it took up all of my storage space. The data file would not show up anywhere so I had to restore my laptop to the factory settings and that worked for awhile but I eventually had to get a new laptop.

    Did you try to set it up as new device, as explained in this article?
    How to erase your iOS device and then set it up as a new device or restore it from backups
    If this does not work, use iTunes to set it back to factory settings, which would also install the latest software:
    Use iTunes to restore your iOS device to factory settings - Apple Support

  • Recover an iMovie from a failed external drive?

    Has anyone been able to get an entire iMovie recovered from a failed external Firewire drive? My LaCie just won't power up despite having its light come on, and having other external drives connected through it to my iMac and working fine.
    I was about to do some backing up after finishing some edits on my latest iMovie, located on that drive. The edits were taking a longer time than usual, with spinning beach ball going on and on, so I decided to restart the Mac and see if that would speed things up. A restart resulted in a totally white screen for over 20 minutes, so I powered off with the switch, and powered on again with it a few minutes later. After three tries, including trying to boot from the installation disk, the iMac sprang to life again, and three of my external drives came on as usual, but not the La Cie that has my iPhotoLibraries and the iMovies I am working on. It is not a problem with power cords or the Firewire cables, as I swapped them out with the other drives, and everything works except this drive will not power up. Its light comes on, and the Firewire ports allow the other drive to come on, as this one is the one connected to the iMac, but the drive remains cold and quiet, just sits there with its blue light blinking.
    I just need it to power on long enough to transfer my data to another drive.
    I will settle for drive-recovery if that means I will get all my movies and photos back......anyone ever had to use a drive recovery service for this? If so, how did it work?
    I do have backups for the photos, but not all of them as I don't usually backup every day. The movies will have to be recreated I can do this, it will just take lots of time......
    not happy with this situation....any support/sympathy greatly appreciated!

    Beverly Maneatis wrote:
    .. The drive comes on and its light blinks, but does not progress to the drive powering up and the light becoming a solid nonblinking. ..
    sorry to contradict you, Bev, but the drive itself has no lights.. :
    (pic by wikipedia)
    THIS is your drive with your precious data .. no blinks ...
    ok, I'm a typically 'Tim Taylor/Home Improvement'-guy (incl. friends in hospital...), so maybe a daredevil about screwing things up/open (pun-taaaa). if you open the housing (usually 4 screws on bottom), you would see a power-supply, some small board for the interface electronics, a fan, some small board for some other electronics. and two cables: one with 4 cables (=power), one flat cable with ~20something wires (=data).. the drive is fixed with another four screws.. it is really dead easy, and you can not damage the drive itself, except you wear some angora and plastic sandals, to get some zillion of volts of static electricity into your fingertips ...
    so, if you find a nice PC-guy, ask him to place the drive into another housing (usb or fw.. doesn't matter...).. for a pro, that is a 5min procedure.. I'm pretty sure, it will work! < fingers crossed > < throwing ash over shoulder > < murmering some Hun's incantaion >

  • My hard drive failed. My applications were on the drive including Excel, Word, and Powerpoint. Apple told me I could pull everything from the failed drive. I tried that but the drive is bad so I can't get to anything. Do you think Apple will reinstall?

    My hard drive failed. My applications were on the drive including Excel, Word, and Powerpoint. Apple told me I could pull everything from the failed drive. I tried that but the drive is bad so I can't get to anything. The Office package was installed/included when I purchased the Mac. Does anyone think Apple will provide me with the Office package? Thank you!

    Thank you everyone. I apologize to confusing all but I am up to date and running OS X 10.8.2.  It's possible I purchased the key for Office but I don't think so although it was 3-4 years ago. I guess I will stop in the Apple Store and just ask. I may just buy the new bundle anyway to get the most updated.
    I have read there are issues with the MS Office bundle running on our latest OS, is that true?
    Thank you all!!! You've been great!

  • Import from iphoto fails every time.

    Import from iphoto fails every time.

    It should not be a serious flaw, since this something that you only do ONCE. You don't want to use both organizer and iphoto. You'll have two sets of photos with no knowledge of each other. Import from iphoto is not meant to be a regular use item, only for the one time after you've decided organizer is what you prefer. It's fine to make a small test catalog while you decide whether iphoto or organizer suits you better, but to keep on using both is going to make you crazy in short order.

  • Recover from a failed Sound.load()

    I've written a MP3 player for podcasts, and I am using the
    Sound.load() to load the MP3 file from a URL. From time to time,
    the download fails ... and an error occurs.
    I am able to catch the error just fine ... but now what? How
    do I restart the load? Or how do I recover from the failed
    download?
    Right now, I start the load, and also begin to play the sound
    to the user ... so they can begin to listen. In some cases I have
    seen the download of a 60 minute podcast fail at - maybe - 43:29.
    So they are listening, and might be 10-15 minutes in ... I catch
    the error ... and now what?
    I can't seem to find any documentation on what to do at this
    point ...

    You could use a custom event. In your error handling code
    dispatch your custom event, passing in something, like maybe the
    path to file to be loaded, then try to reload. Everytime it fails
    you will retry.

  • PC crashed and now using a different PC.  How do I get my iTunes library back from the failed PC on the PC being used now?

    PC crashed and now using a different PC.  How do I get my iTunes library back from the failed PC on the PC being used now?

    Extract the hard drive from the faulty computer and recover the library from it or see Recover your iTunes library from your iPod or iOS device. (At least one link in there may be useful even if you don't have such a device.)
    tt2

  • Read from socket failed: Connection reset by peer

    On Solaris 10 SPARC I have NO problem with establishing SSH connections.
    Here is proof:
    # svcs -a | grep ssh
    online Jun_02 svc:/network/ssh:default...but here is what can be found in /var/adm/messages
    Jun 7 04:09:16 my_host sshd[11701]: [ID 800047 auth.crit] fatal: Read from socket failed: Connection reset by peerTHIS IS IMPORTANT!!!
    This messages does not appear during I establish my ssh connection. It appears irregular.
    Does anyone know whats going on ?

    Hi Darren,
    that would make sense but I just made a test:
    I have opened tail -f /var/adm/messages and from other host:
    - telnet to it on port 22 - no message
    - closed client during establishing connection - still no message
    But I belive you must be right as I see no other possibility...
    Can I turn on more detailed logger in message to be able to see IP address of all host who are trying SSH connection ?
    Edited by: czezz on Jun 25, 2009 10:50 PM

  • Create application from spreadsheet failing - APEX 3.0

    Create Application from Spreadsheet failing (wrong column order) on the upload
    example csv columns are nameA, nameB, nameC
    Upload as csv
    The column order of the csv file changes....(its random).
    example csv is nameC, nameB, nameA -.but sometimes it works after numerous tries uploading it (column order is correct - same as csv file)
    I have another apex/db (10.1.0.4.2) installation(same version 3.0) where it works all the time(same csv file)
    The database for the failing Apex installation is (10.2.0.1.0)
    ANY IDEA???...could be a a database caching issue or a wrong db parameter?

    What table gets populated when you upload a csv file via create application from spreadsheet (is it only APEX_APPLICATION_FILES)? Because if i import the csv file in the repository it looks file when i download it. I not sure what controls the order of the csv file column order upon the upload create application from spreadsheet process. This is a very perplexing problem since it works on another apex 3.0/10.1 database environment.
    thanks

  • Can I save my files from a failing hard drive?

    Sorry if this is kind of long. I booted up the system off the Mac OS X disc after getting startup errors. I ran the Disk Utility and it could not verify or repair the hard disk. S.M.A.R.T. status reads "failing" in red. My best guess it that the hard drive is on it's way out. Tried to save my files by making and image file of the hard disk and putting it on an external drive, but I got an error and it wouldn't save. Put the system in Target Disk mode and tried to access the files from another Mac connected via FireWire, but it wouldn't mount on the second Mac's desktop. I checked Disk Utility and it was creating multiple images of the first Mac's hard disk and failed to mount. Is there any other way to retrieve the files from the failing hard drive? I'd appreciate any assistance on this.

    Maybe, but at this stage, I'd boot from a data recovery tool, such as those listed on my FAQ*:
    http://www.macmaps.com/backup.html#RECOVER
    If none of those work, you may want to consider a data recovery service, depending on the value of the said files.
    Moral of the story, always backup your data*:
    http://www.macmaps.com/backup.html
    It is not a question of if data will be lost, but when.

  • Determination of component from SCR failed

    hi all gurus:
    When I execute Solution Manager Basic Setting Wizard: Initial Configuration Part II, it comes out an error:
    "Determination of component from SCR failed". The SLM version is SPs 17.
    any tips or advice would be great. thanks.
    [picture|http://www.mountain.org.tw/sap/090318_Run_SAP/Determination%20of%20component%20from%20SCR%20failed.png]

    Hi All,
    Please find solution below:
    This alert is triggert by the global systemloadmonitor. If you don't need this funktion please deaktivate the backgroundjob SAP_COLLECTOR_FOR_NONE_R3_STAT
    This job executes the Report RSN3_STAT_COLLECTOR which sends the displayed alert in the CCMS-Infrastructur
    Regards,
    Jochen

  • Determination of component from SCR failed S03513

    Hello,
    in transaction SLG1 (Display logs) I detected the following errors:
    Determination of component from SCR failed
    Message no. S03513
    Does anybody know the cause of this error?
    Many Thanks in advanced!
    Regards,
    Lutz

    Hi,
    Cause of this error is if some  data is missing  in the CCMS System Component Repository (SCR). That means  SCR  contains no information about that components .
    You may go to ST06 click on Operating system collector and check logfile , if any error is there or try to  restart the OS collector.
    Hope it will help.
    Regards,

Maybe you are looking for