OSX NAS with MacMini and USB HDD's

I have been trying to figure out what would be the best solution for a making a few TB's of storage available to all users in my home network.
I tried AEBS, but the performance is just way too slow. If I were to setup a macMini with attached FW and USB drives, how would I make those drives available to my users on my home network?
Also, do I need to leave the system logged in as a user or can I just share out drives and partitions and leave them?
I'm new to OSX networking.
Thanks

I tried AEBS, but the performance is just way too slow.
any clients connecting via wifi will experience slower file access. Make sure the wireless clients are using 802.11n then you can achieve acceptable speeds.
If I were to setup a macMini with attached FW and USB drives, how would I make those drives available to my users on my home network?
Set Up File Sharing With Other Mac Users on Your Local Network
Also, do I need to leave the system logged in as a user or can I just share out drives and partitions and leave them?
When using a computer as a server it needs to on 24/7. It is best to have a user logged in even if no one uses that mac as a deskop as it make it easier to remotely administrate it over vnc for example

Similar Messages

  • Is it possible to make OSX see the internal and external HDD's as one large drive?

    Is it possible to make OSX see the internal and external HDD's as one large drive? For instance, hypothetically, could I have a Mac Mini Server with 2TB of internal storage and 2 external 4TB Thunderbolt HDD's, and make the OS see them all as one large 10TB drive?

    Yes it is possible to do this, but this is not recommended since a disconnection of the external drives would lead to a destabilized system. Its best to do this only with internal drives, or secondarily with only external drives that are set up separately from the boot drive.
    However, if you do wish to do this then you can combine any local set of volumes into one large "spanned" hard drive using Apple's CoreStorage volume management service. It does take a few steps to set up and requires use of the Terminal and Disk Utility. Here is a tutorial on how to do this: http://reviews.cnet.com/8301-13727_7-57550128-263/how-to-make-a-custom-corestora ge-drive-in-os-x/

  • All of a sudden my personal hot spot isn't working. It only comes up with Bluetooth and USB connection options. Why would that be?

    All of a sudden my personal hot spot isn't working. It only comes up with Bluetooth and USB connection options. Why would that be?

    No I can not turn on the wifi either. I can get on the web on my phone and Facebook etc on phone but no wifi or hotspot

  • Even after doing the recovery of my iphone 4,  still i am getting a picture with itunes and usb port in phone.  showing only the emergency call

    I did a recovery of my iphone4.   After extracting,  recovery and verifying  completing,  my iphone restarted.    But still i can only see the picture with iTunes and USB port in the iphone 4.   Only the emergency call is allowed.
    After recovery and re-start of my iphone4  the itunes doesn't detect my phone.       What should i do now

    DFU Mode and restore again, if it doesn't work, well then...I suggest you try using a custom firmware maker (sn0wbreeze), NOT for the jailbreak, just to try and fix your phone.

  • Problem with T60 and USB Sticks

    All -
    I can't understand it but I have a huge problem with USB devices and my T60.
    EVERY USB device works 100% fine - despite of USB memory/HDD/other memory devices.
    Neither USB HDD or USB Sticks nor a SD drive via USB - no media is accecpted.
    I always get back: "Media not formatted".
    If I do format everthing works - but only with this notebook.
    So I am not able to share data with other computer - or not able to get my pics from my cam... 
    Please can you help?
    Thank you very much in advance,
    iBigfoot 
    Message Edited by ibigfoot2008 on 09-05-2008 10:04 AM
    Message Edited by ibigfoot2008 on 09-05-2008 10:05 AM
    Message Edited by ibigfoot2008 on 09-05-2008 10:05 AM

    I hate to say it, but I agree with carbon_unit, this sounds like a Windows problem.
    As a long shot you could try uninstalling all USB hubs in Device Manager, re-install the Chipset Drivers and restart the sytem to allow the USB hubs automatically installed again. I doubt this will help, but it's all I could think of.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Lenovo C255 - USB Drive and USB HDD is not recognized

    Hi
    I am trying to attach SSD (Kingston SSDnow 300 -  60gb) drive to PC via bridge SATA-USB to USB 3 port, so i have "USB to ATA/ATAPI Bridge" stuff at installed devices and no HDD disks appeared at MyComputer . Still i have 2 disks at Device manager - my native HDD and this USB Drive. 
    The problem is that BIOS doesn't see any USB HDD. Excluded from the bootable device : USB HDD USB CDROM.
    So how i can solve this issue ? 

    Hi
    I will try to help you buddy.
    > When it is started is says "Insert system disk in drive. Press any key when ready
    This message appeared on my notebook after the HDD has died.
    I had to replace the HDD and to install the OS again.
    I assume its the same problem with your notebook. The HDD is not present or not recognized and you have to install a compatible HDD to get the OS running.
    I have googled a little bit and found out that this notebook was delivered with the 10GB Toshiba MK1016GAP HDD. It supports the ATA-2/ATA-3/ATA-4/ATA-5 interface.
    Please note that many BIOS have an HDD size limitation. This means that not all HDD sizes are supported! I presume a 20GB should be compatible but this is only my own opinion
    > How can I change my BIOS so that the HDD is recognized?
    The BIOS cannot be changed apart from the update (check Toshiba driver page -> Archive -> Satellite Archive).
    But vary important is that you will use a compatible HDD.
    > Can anybody help me with the recovery CD?
    Dont know if you will be able to order this CD from the authorized service provider in your country because the notebook is really an oldie. But you should ask the guys.
    What you could is to install the OS from the Microsoft CD and then could install some necessary drivers.
    Greetings

  • K8 Neo 2 and USB HDD

    K8 Neo2 (7025), Bios 1.B
    On reboot, external USB HDD(2.5''; powered from USB bus) is not detected. Only re-plugging will help.
    At the same time, flash drives are reconnected properly.
    Should not be a power problem, as drive is powered from 2 USB ports, and works perfectly with laptop.
    Is there anythig that can be done to correct this?
    Thanks.

    Perhaps the selfpowered usb ports on nvidia boards just doesn't give enough amp to
    your HD .
    Never tried a USB powered device on the board myself , so it's hard to say .
    You could try with a usb hub that is self powered if you have/can borrow one .

  • Iphone stuck with itunes and usb symbol, havent got disk help!!!

    i have my itunes uptodate but the iphone is stuck with the itunes and usb symbol on screen, i havent got the disk for the computer either :/

    daniellefromnottingham wrote:
    the disk for the iphone, and the iphone doesnt show up on itunes at all
    There is no "disk".  You have iTunes.
    Have you tried a different cable, a different USB port, rebooting the computer?

  • My phone is stuck  on tunes with arrow and usb

    ihave a iphone4 and its stuck on tunes with a arrow and usb what do i do

    The connect to iTunes screen is telling you to connect to iTunes on your computer so you can restore your device. Start the latest version of iTunes on your computer and connect your device to the computer. You should then be promoted through the restoration process.

  • [solved] Can't boot with LVM and usb external disk

    I successfully installed Archlinux on my first computer, using LVM on two internal Hard Drives.
    I'm trying to do exactly the same on my second computer, but I got a problem: the LVM volume is not found at boot, so that the root partition can't be mounted and the boot fails.
    The only difference is that, on my second computer, the second hard drive is connected through USB.
    Some hints: my second computer boots perfectly with LVM and Ubuntu. Archlinux needs to be configured adequately.
    I tried to add rootdelay=30 in menu.lst, but it changes nothing. Of course, in /etc/rc.conf I have USELVM="yes" and in /etc/mkinitcpio.conf I have HOOKS="base udev autodetect pata scsi sata keymap lvm2 filesystems"
    Thank you for helping me to keep Archlinux on my second computer!
    Last edited by Achille (2008-06-29 21:59:09)

    I finally solved my problem!
    In the file /etc/mkinitcpio.conf, I modified the MODULES loaded:
    MODULES="pata_acpi ata_generic ata_piix usbcore usb_storage uhci_hcd ehci_hcd sg scsi_mod sd_mod dm_mod"
    I also add in the file /lib/initcpio/hooks/lvm2 the line /bin/sleep 10
    /bin/sleep 10
    msg "Scanning logical volumes..."
    And finally, I ran the command:
    mkinitcpio -p kernel26

  • Controling heating/cooling element with labview and usb 6008 DAQ card

    Greetings All
    I'm looking for a heating/cooling type of element that I can control with labview and my usb-6008 card. Heating/Cooling will just be for clean water and the temperture range will be from 0 C to 100 degree C.
    Thanks
    The heating and cooling elements can be seperate products. Any recommendations

    A simple kettle element will of course be sufficient for upto 100°C
    To get the temperature down you need a cooling system, what springs readily to mind of course is a refrigerator.
    Just a note of warning, water and electricity are dangerous bed fellows.
    On that note perhaps one of those vortex air units would be safer - they blow hot in one direction and cold in the other, nominally to 100°C
    see: -
    http://www.airtxinternational.com/how_vortex_tubes_work.php

  • Recovery and USB HDD Question

    I have a USB HDD for my laptop (About 1TB). If worse comes to worse, is it possible to restore from System Image that I create on that USB HDD, or does it have to be a USB flash drive?
    Qosmio X870-BT3G23

    Qosmio X870-BT3G23
    I have a USB HDD for my laptop (About 1TB). If worse comes to worse, is it possible to restore from System Image that I create on that USB HDD, or does it have to be a USB flash drive?
    Depends on what image you created.
    Best to back up a current image periodically to that external drive this way. I'll assume you've upgraded to Windows 8.1.
       Use System Image Backup
    The image that enables you to restore the hard disk to its original out-of-the-box contents needs to be on DVDs or a flash drive. See p. 54 of the User's Guide.
    -Jerry

  • Iphone stuck with itunes and usb logo even when not plugged in

    hi i tried to update to the ios 6.0.1 and now my iphone 4 is stuck in recovery mode and i have tried everything. It even shows the itunes and usb even when it isnt plugged in. I can restore from icloud cos i hadnt finished signing up on my device. I need help quick! thankyou

    Place the device in DFU mode (google it) then restore as new.

  • Sync Problems With Ipod and External HDD

    Ive just got a new 4G ipod after returing it because of HDD problems and when i try to sync with itunes, it manages to sync a random number of songs (ill get to that later) often about a 100 and the says "Ipod could not be written or read from". The thing is that i use an Lacie 80Gb External USB 2.0 Powered Harddrive as my Music library. Also it seems not to be USB timeout because ive tried to power both the External HDD and Ipod with an external powered USB 2.0 Hub. Ive found out that the number of songs that syncs each time depends on the songs, because it seems that some songs cannot just be copied (ive tried to copy them through finder and it dosent work either, but moving and/or deleting them works) and they arent in anyway different(what i know of) to the songs that manages to be synced to the ipod. None of the songs have any kind of DRM restrictions.
    Ibook G4   Mac OS X (10.4.7)   Use An External USB 2.0 powered HDD as main media storage

    Ive had it on my Ibook before and then moved it to the HDD because of Space Shortage, and then just added as ive aquired more music. Idon't Really Remeber but i think it worked before without any hiccups. oh well otherwise i can just delete those files because theyre only single files here and there. but its quite irritating because they don't seem to have any kind of corruption.

  • 2006 Mac Pro (OSX 10.7.5) and USB 3 speeds

    I'm considering the purchase of a HighPoint RocketU 1144CM USB 3.0 PCIe card and would like to know if there's anything in the architecture of my 2006 Mac Pro [Build 1,1] which might limit throughput speeds to USB2 standards. The manufacturer's [HighPoint] website claims compatibility with OSX 10.7.5 (my current operating system) but does not make any mention of the year in which the computer was built. Will I be able to obtain USB 3.0 speeds or would I just be wasting my money? Any insight would be greatly appreciated. Thanks.

    There have been more limitations and choices in support for even the 2008 and earlier.
    Chipsets change, some use drivers and drivers that support 32-bit kernel and a smaller number of users, have hampered choice.
    I was using two Sonnet SATA II controllers, the E2P and the E4P. Those worked and of course speed was fine, as was ejecting, sleep and other features and behavior.  The Allegro has probably changed over the years and there are cheaper alternatives.
    www.xlr8yourmac.com does have readers reports in a database and write-ups.
    It has also been discussed here many many times, and on MacRumors forum for the Mac Pro.
    What is the state of USB 3.0 on Mac Pro?  (  1 2 3 4 5 6 ... Last Page)
    Highpoint can be iffy in support. As to USB2 speeds, only if the device(s) are a factor, and Allegro does not support hubs or non-storage devices (phone, tablet, card readers etc)

Maybe you are looking for

  • Add, delete and group fields in Application Area of transaction CIC0

    Hi, In the transaction of CIC0, I have the requirements of: - Delete the field "Function" corresponding to the Business Partner 1, all the fields corresponding to Business Partner 2, all the fields corresp. to IBase, and the fields: "Address type" an

  • Regarding Query tuning

    Hi, I am executing this query but it is taking more time to execute. SELECT TO_CHAR(A.CALLEND,'MON-YYYY')ROAMERMONTH, C.OPCCIRCLE INROAMCIRCLE, COUNT(DISTINCT (A.CDPADIGITS))INROAMERCOUNT, B.DPCCIRCLE OUTROAMCIRCLE, C.REPORTOPERATORNAME INROAMREPORTO

  • FW 31.0.017 problem - Screen shut-off

    I have a very irritating problem after the up-grade to 31.0.017. Closing the slide of my N95 causes a momentary 45 degree scew of the display and then the screen shuts off completely. The phone is still on and recieves calls etc. but the display rema

  • Budget miniDV recommendations Please...

    Hi, I'm interested recommendations for an (inexpensive) miniDV camera for use with iMovie '06. Also, should I expect to buy an analogue>digital converter in order to import Hi8 tapes into iMovie, or can I do this via interfacing through a miniDV came

  • My safari button disappeared on my macbook pro. What do i do?

    I restarted my macbook pro and i was gone. I restarted again it is still missing.