OTL Timecard Customization - Add new Field for Unpaid Breaks

Hello Guru's,
I took the Payroll Layout for the client and implemented OTLR for Overtime caluculation.
Everything is working fine.
Client is looking to Add a field called "Unpaid Breaks" on the timecard which takes only minutes as input and deduct the Regular Hours element
before Timecard Explosion.
It is weekly timecard and the new field "Unpaid Breaks" should be displayed for all the days next to the time punches.
Please advice on how to implement the requirement.
I am looking to open the seeded layout and try to modify.
But please suggest ideas and approach.
Thanks

Client Does not want it to be a earning element and do not want to catch Punch in and Punch out times for Unpaid breaks.
User should enter only minutes and that should be deducted from Regular Hours before explosion.

Similar Messages

How to add new fields for ESS leave request

Hi friends,
Can u please help me with my issue.......
My issue is to add new fields in ess/leave request i.e...
The component needs to be Checked-out through Net Weaver Development Infrastructure, make the necessary enhancements, and finally Check-it-in back to NWDI.
Custom Function Modules are to be invoked apart from the standard ones that are already available in the Leave Request component ess~lea inorder to accommodate the extra absence-type logic.
can u please sujjest me where should i make changes in the given 14 components
means in which view i have to add these fields.................
Regards
Rajesh

Hi Rajesh ,
Check whether u are able to find the ess dc's under inactive dc's in webdynpro
If ur not able to find it then Check the landscape configurator in CMS and also the transport studio and confirm that ess packages are imported fine
Ganesh ,
for creating a DTR client u need to open the DTR perspective right click and "create clients" before that go to windows ->preferences of the NWDS and check the development infrastructure URL is gven correctly ...try pinging it once...
Do check ur SLD is up or not!!!
Regards
Krishna
Message was edited by:
krishnagopal Mukundan

Need exit to add new fields for Vendor master creation

Hi All,
        I have to add a new screen with some fields in Vendor master (Xk01) creation. Can any one suggest me
any screen exit / user exit through which I can add these fields.
       Please explain the procedure to add the fields through exit.This will be of great help.
Thanks
Vinod.

run the following program which ggives available exits for tcode
REPORT z_find_userexit NO STANDARD PAGE HEADING.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
TABLES : tstc,     "SAP Transaction Codes
         tadir,    "Directory of Repository Objects
         modsapt, "SAP Enhancements - Short Texts
         modact,   "Modifications
         trdir,    "System table TRDIR
         tfdir,    "Function Module
         enlfdir, "Additional Attributes for Function Modules
         tstct.    "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
    WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
       WHERE pgmid    = 'R3TR'
         AND object   = 'PROG'
         AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
         WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
          WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
          WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
          WHERE pgmid    = 'R3TR'
            AND object   = 'FUGR'
            AND obj_name = enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
Find SAP Modifactions
    SELECT * FROM tadir
      INTO TABLE jtab
      WHERE pgmid    = 'R3TR'
        AND object   = 'SMOD'
        AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
      WHERE sprsl EQ sy-langu
        AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(95) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
      WRITE:/1 sy-vline,
      2 'Exit Name',
      21 sy-vline ,
      22 'Description',
      95 sy-vline.
      WRITE:/(95) sy-uline.
      LOOP AT jtab.
        SELECT SINGLE * FROM modsapt
        WHERE sprsl = sy-langu AND
        name = jtab-obj_name.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
        WRITE:/1 sy-vline,
        2 jtab-obj_name HOTSPOT ON,
        21 sy-vline ,
        22 modsapt-modtext,
        95 sy-vline.
      ENDLOOP.
      WRITE:/(95) sy-uline.
      DESCRIBE TABLE jtab.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'No User Exit exists'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.

How to add new fields for FB01 transaction both at Header and Line item

Hi Guys,
I would like to add the new fields at header and item level in FB01 transaction. Can I acheive this by using transaction EEWB....please help me on this.
Thanking you

Hi,
We are trying to copy a work flow objects from ECC6.0 to 4.6C...where we found the following Select statement.
*Determine Top WorkItem Instance
if im_top_wi_id is initial.
   select wi_id top_wi_id wi_rh_task into lw_top_id from sww_wi2obj
     up to 1 rows
     where wi_rh_task = im_wftask and
           catid      = 'BO'      and
           instid     = l_instid and
           typeid     = 'FIPP'.
   endselect.
   endif
As table sww_wi2obj can't be found in 4.6C, can any one help how to replace or implement the same logic as above statements.
Thank you....

New field for RFDEPL00 report

Hello, colleagues. Could you tell me how to add new field for RFDEPL00 report? It's gonna be field from KNA1 table. I know that note 984305 helps to do it for FBL5N. But this report uses another structure.

Hi,
I don't think you can... Indeed, with RFITEMAR report (FBL5N), you can play with the structure, but not in RFDEPL00/RFKEPL00 reports. Only modification: you can take note 868388 as an example of a change, if you decide to do it.
Regards,
Eli

Hi All ,How to add a new field for MEDRUCK if we havea ZMEDRUCK

Hi All ,
        How to add a new field for MEDRUCK if we have a ZMEDRUCK
Req: If I want to add a new field for the following text editor line :
IN MAIN WINDOW > TEXT EDITOR> SERCH FOR TOTAL_AMOUNT-->
In that we will have
&ekko-waers&    &komkfkwrt&
(currency)       (numerics)
Pls send the Code to make these changes .Pls its urgent
Thanks&Regards.
Bharat.

Hi
If that field which you wants to add is available in one of the structures like EKKO,EKPO then you can add that field just beside the other fields
If that field is not there in the any of the structures then you can define a variable using define command
/: DEFINE &VAR&
/ &VAR& = <some value>
or you can write subroutines to fetch the data from outside tables and can use those fields data in the script
<b>Reward points for useful Answers</b>
Regards
Anji

How to add new fields to picklist of search criteria for opportunities

Hi Friends,
Could you please tell me how to add new fields to the picklist of search criteria of Opportunities in WEBCLIENT(CRM 2007).
Regards,
Vijay

Dear Vijay,
We are facing the same problem over here.
Have you managed to find a solution? Please share
BR,
Rohit

OTL Timecard Customization !!!

Hi All,
I'm trying Customization to OTL Timecard i.e add two extra columns Project Name and Task Name.
I got this ldt file (hxczzhxclayt0019.ldt) to customize. I did my changes to add these fields. I was successful in seeing these columns.
But the problem is I don’t know if the LOV is actually working or not. When I click on the Torch or LOV icon, it does open and I’m able to select the project name. But when I’m done with selection of the project name it does not reflect on the Project Name column of the Table Matrix, it instead shows the Project Id in the Project Column of the Table Matrix. And how will I make the Project Id and Project Name dependent.
Note:1) ProjectLOVVO was already there with project name. so i dint customize it.
2) And i have no idea how QUALIFIER_ATTRIBUTE6 field works.
3) Could any body please explain me or direct me where i can get the definitions of the fields QUALIFIER_ATTRIBUTE (1 to 30)
Here is the code changes I have made in the ldt file.
##########Text Field for Project Name############
BEGIN HXC_LAYOUT_COMPONENTS "Projects Timecard Layout - Project Name"
OWNER = "ORACLE"
COMPONENT_VALUE = "PN"
REGION_CODE = "HXC_CUI_TIMECARD"
REGION_CODE_APP_SHORT_NAME = "HXC"
ATTRIBUTE_CODE = "HXC_CUI_PROJECT_NAME"
ATTRIBUTE_CODE_APP_SHORT_NAME = "HXC"
SEQUENCE = "215"
COMPONENT_DEFINITION = "LOV"
RENDER_TYPE = "WEB"
PARENT_COMPONENT =
"Projects Timecard Layout - Day Scope Building blocks for worker timecard matrix"
LAST_UPDATE_DATE = "2009/05/20"
BEGIN HXC_LAYOUT_COMP_QUALIFIERS "Projects Timecard Layout - Project Name"
OWNER = "ORACLE"
QUALIFIER_ATTRIBUTE_CATEGORY = "LOV"
QUALIFIER_ATTRIBUTE1 = "ProjectLOVVO"
QUALIFIER_ATTRIBUTE2 = "N"
QUALIFIER_ATTRIBUTE3 = "HXC_CUI_PROJECT_LOV"
QUALIFIER_ATTRIBUTE4 = "809"
QUALIFIER_ATTRIBUTE5 = "12"
QUALIFIER_ATTRIBUTE6 =
"HxcCuiProjectNumber|PROJECT-DISPLAY|CRITERIA|N|HxcCuiProjectId|PROJECT|RESULT|N|HxcCuiProjectNumber|PROJECT-DISPLAY|RESULT|N|HxcCuiProjectName|PN|RESULT|N"
QUALIFIER_ATTRIBUTE8 = "ProjectName"
QUALIFIER_ATTRIBUTE9 = "ProjectId#NUMBER"
QUALIFIER_ATTRIBUTE10 =
"oracle.apps.hxc.selfservice.timecard.server.ProjectLOVVO"
QUALIFIER_ATTRIBUTE17 = "OraTableCellText"
QUALIFIER_ATTRIBUTE20 = "N"
QUALIFIER_ATTRIBUTE21 = "Y"
QUALIFIER_ATTRIBUTE22 = "L"
QUALIFIER_ATTRIBUTE25 = "FLEX"
QUALIFIER_ATTRIBUTE26 = "PROJECTS"
QUALIFIER_ATTRIBUTE27 = "Attribute8"
QUALIFIER_ATTRIBUTE28 = "PN"
LAST_UPDATE_DATE = "2009/05/20"
END HXC_LAYOUT_COMP_QUALIFIERS
END HXC_LAYOUT_COMPONENTS
Please suggest me a solutions, this is an urgent issue i need to resolve !!!
Thanks and in advance.

Client Does not want it to be a earning element and do not want to catch Punch in and Punch out times for Unpaid breaks.
User should enter only minutes and that should be deducted from Regular Hours before explosion.

How to add New fields to Customer Master Record Screen

Hi All,
As per our business requirment we need to add some new fields the BP screen.
Could you suggest me how can I customize the new fields in BP creation screen.
I change the screen sequence with the help of VCT, but I need to add some more new fields. Your suggestions will be highly appreciated.
Thank you and Best regards

Venkat,
Your best bet is to read the documentation at:
http://help.sap.com/saphelp_crm40/helpdata/en/20/a4ffee7e0fcc4ebb7e5466d3903d38/frameset.htm
This gives you an overview of the Easy Enhancement workbench.
Your steps to use it will be the following setup the customizing in transaction EEWC. You can search this forum for help on how to setup this customizing.
Then create the new extension using transaction EEWB, and follow the steps in the help documentation above, also read note: 484597.
After you have read the doucmenation, and if you get stuck, then let me know and I will try to answer those questions. The EEWB is very simple, so I don't think you will have too many problems using it.
Good luck,
Stephen

PLz Help me its urgent, how to add new field in mm01 basic data screen

Hi everyone,
plz tell me how to add new field in mm01 basic data screen,i added that field in basic data screen but when i create a material the data for that field will not save in database table.
Thanks,
murali.

Hi Murali,
when created added a field on the screen by using user exit then after that you have add the field in main table where you will be getting these table in the userexit only, please make sure about this. And i am sure defenitly it will get updated in to the table.
reward if useful.
thanks
abdulsamee.

Add new field to HR PCR forms

Hi All,
We are trying to enhance adobe form for scenario SRQ1.
We want to add some new fields to tha form.
For that we have copied the existing standard form to zform.
We have implemented the zinterface too.
To add new field on form we created as an import parameter in form interface.
We added to context of adobe form and on layout.
But we are not getting that field in 'special_data' table in BADI implementation of SRQ1.
Please let me know how and where we should write a code to add new field in 'special_data' table.
Thanks & Regards,
Nilesh.

Thanks Suresh,
We have added it to characteristics of SRQ1 scenario and it's working.
But now we are facing problem in adding data to additional_data table.
Can you tell us something about it.
Actually in set_additional_values method of BADI we are adding data to additional_data table but on form it is not reflecting.
Please advice.

Not able to add new fields in Content cube

Hi all
I think I had this post earlier too, but I haven't been able to add new fields in a Business content cube. I added them in the cube but I am not sure how to update the datasource, infosource, update rule etc. in proper manner.
Please write me the details or send me in my email at
[email protected] , I would be so happy for your help.
Thank you in Advance.
Sajita

Roberto;
I am doing the third options. feeding data from source system and I tried to add them into the infosource it didn't work. In this case, do you think I need to update the data sourece too, if so how do I do that it's function module. data source I am using is '0ME_ISM_AM_REV_1'. So please give me some more details. Thank you.
Sajita

IDOC - add new field in in existing segment definition

Hi,
For segement type say Z1MARA1 if we need to add a new field in segement definition say Z2MARA1 SAP is not allowing to add new field if we tried to cancelled the realsed 30E it not allowing since the SAP realease which we are working is 640 so only we can create new segement defination with version Z2MARA1001 with new field added but issues is that the partner Profile for outbound parameters the Segment release in IDOc Type is 31I so if we change this segment release in IDOC type to new version ie., 640 then it will pick all the new segement associated with it due to which the the format in which we pass the segements to third party will change so is there any way to use the existing segment definition which is release 30E & add addition field to it. Only one way I found is that when i try to cancel the released message is trigger so in the debug if I make it success it allows to add new field in existing segment definition but which is wrong way of doing is there any way we can used same segment definition & add new field without adding new version & new released.
Thanks in advance.
Rajeev

Varma,
I know that we can add new segement with new version my question is existing segement definition can we add a new filed because in partner profile we specified release 31i so even we create new segement type then version will be 640 so it will not pick the latest version.
Thanks
Rajeev

I want to add new field to this list

hi all,
i want to add new field to this list.
kostenstelle from table zfmkstel
*& Report ZFM_MOBLIST                                                 *
REPORT ZFM_MOBLIST.
TABLES: zfm_handy , pa0002.
TYPE-POOLS : slis.
DATA: g_repid LIKE sy-repid,
      gs_print            TYPE slis_print_alv,
      gt_list_top_of_page TYPE slis_t_listheader,
      gt_list_end_of_page TYPE slis_t_listheader,
      gt_events           TYPE slis_t_event,
      gt_sort             TYPE slis_t_sortinfo_alv,
      gs_layout           TYPE slis_layout_alv,
      gt_fieldcat         TYPE slis_t_fieldcat_alv,
      fieldcat_ln LIKE LINE OF gt_fieldcat,
      col_pos TYPE i.
*DATA : BEGIN OF it_moblist OCCURS 0.
       INCLUDE STRUCTURE zfm_handy.
*DATA : nachn TYPE pa0002-nachn,
       vorna TYPE pa0002-vorna,
     END OF it_moblist.
DATA : BEGIN OF IT_MOBLIST OCCURS 0,
       TELNUM TYPE ZFM_HANDY-TELNUM,
       KARTNR TYPE ZFM_HANDY-KARTNR,
       ZUTART TYPE ZFM_HANDY-ZUTART,
       PERNR TYPE ZFM_HANDY-PERNR,
       nachn TYPE pa0002-nachn,
       VORNA TYPE pa0002-vorna,
       ZDATE TYPE ZFM_HANDY-ZDATE,
       PINNR TYPE ZFM_HANDY-PINNR,
       PUKNR TYPE ZFM_HANDY-PUKNR,
       TARIF1 TYPE ZFM_HANDY-TARIF1,
       TARIF2 TYPE ZFM_HANDY-TARIF2,
       TARIF3 TYPE ZFM_HANDY-TARIF3,
       GTYPE TYPE ZFM_HANDY-GTYPE,
       IMEI TYPE ZFM_HANDY-TARIF1,
        twincard type zfm_handy-twincard,
        twinbill type zfm_handy-twinbill,
        einbau type zfm_handy-einbau,
        beschr type zfm_handy-beschr,
        text1 type zfm_handy-text1,
         text2 type zfm_handy-text2,
          text3 type zfm_handy-text3,
          end of it_moblist.
DATA : BEGIN OF IT_zfm_handy OCCURS 0,
     TELNUM TYPE ZFM_HANDY-TELNUM,
     KARTNR TYPE ZFM_HANDY-KARTNR,
     ZUTART TYPE ZFM_HANDY-ZUTART,
     PERNR TYPE ZFM_HANDY-PERNR,
     ZDATE TYPE ZFM_HANDY-ZDATE,
     PINNR TYPE ZFM_HANDY-PINNR,
     PUKNR TYPE ZFM_HANDY-PUKNR,
     TARIF1 TYPE ZFM_HANDY-TARIF1,
     TARIF2 TYPE ZFM_HANDY-TARIF2,
     TARIF3 TYPE ZFM_HANDY-TARIF3,
     GTYPE TYPE ZFM_HANDY-GTYPE,
     IMEI TYPE ZFM_HANDY-TARIF1,
      twincard type zfm_handy-twincard,
      twinbill type zfm_handy-twinbill,
      einbau type zfm_handy-einbau,
      beschr type zfm_handy-beschr,
      text1 type zfm_handy-text1,
       text2 type zfm_handy-text2,
        text3 type zfm_handy-text3,
        end of it_zfm_handy.
*DATA : BEGIN OF it_zfm_handy OCCURS 0.
       INCLUDE STRUCTURE zfm_handy.
*DATA END OF it_zfm_handy.
DATA : BEGIN OF it_pa0002 OCCURS 0,
        pernr TYPE pa0002-pernr,
        nachn   TYPE pa0002-nachn,
       vorna     TYPE pa0002-vorna,
       pernr TYPE pa0002-pernr,
       END OF it_pa0002.
INITIALIZATION.
g_repid = sy-repid.
PERFORM print_build USING gs_print.      "Print PARAMETERS
START-OF-SELECTION.
PERFORM data_selection.
PERFORM build_fieldcat.
PERFORM eventtab_build CHANGING gt_events.
PERFORM comment_build CHANGING gt_list_top_of_page.
PERFORM call_alv.
*&      Form TOP_OF_PAGE
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = gt_list_top_of_page.
WRITE: sy-datum, 'Page No', sy-pagno RIGHT-JUSTIFIED.
ENDFORM.                    "TOP_OF_PAGE
*&      Form END_OF_PAGE
FORM end_of_page.
WRITE: /.
WRITE AT (sy-linsz) sy-pagno CENTERED.
ENDFORM.                    "END_OF_PAGE
### PRINT SETTINGS
FORM print_build USING ls_print TYPE slis_print_alv.
ls_print-print              = ' '. "PRINT IMMEDIATE
ls_print-no_print_selinfos = 'X'. "NO SELECTION INFO
ls_print-no_coverpage       = ' '. "NO COVER PAGE
ls_print-no_new_page        = ' '. "NO NEW PAGE
ls_print-no_print_listinfos = 'X'. "NO PRINT LIST INFO
ls_print-reserve_lines      = 2.   " FOOTERLINE
ENDFORM.                    "PRINT_BUILD
*&      Form data_selection
      text
--> p1        text
<-- p2        text
FORM data_selection .
data : n(8) type n.
SELECT * FROM
             zfm_handy
       INTO CORRESPONDING FIELDS OF TABLE it_zfm_handy where pernr ne space.
IF NOT it_zfm_handy[] IS INITIAL.
    loop at it_zfm_handy.
      n = it_zfm_handy-pernr.
      it_zfm_handy-pernr = n.
      modify it_zfm_handy.
    endloop.
    SELECT pernr nachn
           vorna
     FROM pa0002
     INTO TABLE it_pa0002
     FOR ALL ENTRIES IN it_zfm_handy
     WHERE pernr = it_zfm_handy-pernr and endda = '99991231'.
   SELECT pernr nachn
          vorna
    FROM pa0002
    INTO TABLE it_pa0002
    FOR ALL ENTRIES IN it_zfm_handy
    WHERE pernr = it_zfm_handy-pernr and begda le sy-datum and endda ge sy-datum.
ENDIF.                              " not it_zfm_handy
LOOP AT it_zfm_handy.
    MOVE-CORRESPONDING it_zfm_handy TO it_moblist.
    clear it_pa0002.
    READ TABLE it_pa0002 WITH KEY pernr = it_zfm_handy-pernr.
    if sy-subrc = 0.
      move it_pa0002-nachn to it_moblist-nachn.
      move it_pa0002-vorna to it_moblist-vorna.
      move it_pa0002-pernr to it_moblist-pernr.
    ENDIF.
    APPEND it_moblist.
    CLEAR   it_moblist.
*endif.
ENDLOOP.
ENDFORM.                    " data_selection
*&      Form BUILD
      text
--> p1        text
<-- p2        text
FORM build_fieldcat .
Explain Field Description to ALV
DATA: fieldcat_in TYPE slis_fieldcat_alv.
CLEAR fieldcat_in.
fieldcat_ln-fieldname = 'TELNUM'.
fieldcat_ln-tabname   = 'IT_MOBLIST'.
fieldcat_ln-no_out    = ' '.
fieldcat_ln-seltext_l = 'TELNUM'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname = 'KARTNR'.
fieldcat_ln-tabname   = 'IT_MOBLIST'.
fieldcat_ln-no_out    = ' '.
fieldcat_ln-seltext_l = 'KARTNR'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname = 'ZUTART'.
fieldcat_ln-tabname   = 'IT_MOBLIST'.
fieldcat_ln-no_out    = ' '.
fieldcat_ln-seltext_l = 'ZUTART'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'PERNR'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'PERNR'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'NACHN'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'NACHN'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'VORNA'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'VORNA'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'ZDATE'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'ZDATE'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'PINNR'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'PINNR'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'PUKNR'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'PUKNR'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'TARIF1'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'TARIF1'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'TARIF2'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'TARIF2'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'TARIF3'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'TARIF3'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'GTYPE'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'GTYPE'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'IMEI'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'IMEI'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'TWINCARD'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'TWINCARD'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'TWINBILL'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'TWINBILL'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'EINBAU'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'EINBAU'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'BESCHR'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'BESCHR'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'TEXT1'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'TEXT1'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'TEXT2'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'TEXT2'.
APPEND fieldcat_ln TO gt_fieldcat.
CLEAR fieldcat_in.
fieldcat_ln-fieldname     = 'TEXT3'.
fieldcat_ln-tabname       = 'IT_MOBLIST'.
fieldcat_ln-no_out        = ' '.
fieldcat_ln-seltext_l = 'TEXT3'.
APPEND fieldcat_ln TO gt_fieldcat.
DATA SORTING
DATA: gs_sort TYPE slis_sortinfo_alv.
CLEAR gs_sort.
gs_sort-fieldname = 'TELNUM'.
gs_sort-spos      = 1.
gs_sort-up        = 'X'.
GS_SORT-SUBTOT    = 'X'.
APPEND gs_sort TO gt_sort.
CLEAR GS_SORT.
GS_SORT-FIELDNAME = 'KARTNR'.
GS_SORT-SPOS      = 2.
GS_SORT-UP        = 'X'.
*GS_SORT-SUBTOT    = 'X'.
APPEND gs_sort TO gt_sort.
ENDFORM.                    " BUILD
*&      Form EVENTTAB_BUILD
      text
     <--P_GT_EVENTS text
FORM eventtab_build CHANGING lt_events TYPE slis_t_event.
CONSTANTS:
gc_formname_top_of_page TYPE slis_formname VALUE 'TOP_OF_PAGE',
gc_formname_end_of_page TYPE slis_formname VALUE 'END_OF_PAGE'.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type = 0
    IMPORTING
      et_events   = lt_events.
READ TABLE lt_events WITH KEY name = slis_ev_top_of_page
                           INTO ls_event.
IF sy-subrc = 0.
    MOVE gc_formname_top_of_page TO ls_event-form.
    APPEND ls_event TO lt_events.
ENDIF.
define END_OF_PAGE event
READ TABLE lt_events WITH KEY name = slis_ev_end_of_page
                           INTO ls_event.
IF sy-subrc = 0.
    MOVE gc_formname_end_of_page TO ls_event-form.
    APPEND ls_event TO lt_events.
ENDIF.
ENDFORM.                    " EVENTTAB_BUILD
*&      Form COMMENT_BUILD
      text
     <--P_GT_LIST_TOP_OF_PAGE text
FORM comment_build CHANGING gt_top_of_page TYPE slis_t_listheader.
DATA: gs_line TYPE slis_listheader.
DATA: today_date(10) TYPE c.
CONCATENATE
sy-datum+6(2) '.'
sy-datum+4(2) '.'
sy-datum(4) INTO today_date.
CLEAR gs_line.
gs_line-typ = 'H'.
gs_line-info = 'MOBLIST DETAILS'.
APPEND gs_line TO gt_top_of_page.
CLEAR gs_line.
gs_line-typ = 'S'.
gs_line-key = 'Date:'.
gs_line-info = today_date.
APPEND gs_line TO gt_top_of_page.
GS_LINE-KEY = 'User:'.
GS_LINE-INFO = sy-uname.
APPEND gs_line TO gt_top_of_page.
CLEAR gs_line.
gs_line-typ = 'A'.
gs_line-info = 'ACTION'.
APPEND gs_line TO gt_top_of_page.
ENDFORM.                    " COMMENT_BUILD
*&      Form CALL_ALV
      text
--> p1        text
<-- p2        text
FORM call_alv .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
   i_callback_program = g_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
   is_layout = gs_layout
   it_fieldcat = gt_fieldcat
     it_sort = gt_sort
     it_events = gt_events
     is_print = gs_print
   TABLES
     t_outtab = IT_MOBLIST
   EXCEPTIONS
     program_error = 1
   OTHERS = 2.
ENDFORM.                    "CALL_ALV.

Hi,
add:
1) to IT_MOBLIST
text3 type zfm_handy-text3,
kostl type csks-kostl,
end of it_moblist.
2)...
CLEAR fieldcat_in.
fieldcat_ln-fieldname = 'KOSTL'.
fieldcat_ln-tabname = 'IT_MOBLIST'.
fieldcat_ln-no_out = ' '.
fieldcat_ln-seltext_l = 'KOSTL'.
APPEND fieldcat_ln TO gt_fieldcat.

Report RCATS_DISPLAY_ACTIVITIES to add new fields

Hi SAP Gurus ,
I have a req to add new fields from a table ZCS_ENGINE to the report RCATS_DISPLAY_ACTIVITIES .
I copied the program and create a Z report ZRCATS_DISPLAY_ACTIVITIES , but i am facing difficulties to add new fields
to the fieldcatalog.
Can u please tell the procedure to add fields into the layout and show the output ..
Advance Thanks,
Thanks,
AMS
Moderator message: too vague, please describe problems in all technical detail when posting again, what is "difficulties", is it classical, ALV, class based ALV, what have you tried so far, please search for available information on fieldcatalog and layouts before asking.
Edited by: Thomas Zloch on Oct 19, 2010 3:28 PM

hi,
as per your requirement (3 fields you mentioned )not inthe standard .you have to contact technical team for new report or enhance ment.
regards
muthuramand

OTL Timecard Customization - Add new Field for Unpaid Breaks

Similar Messages

Maybe you are looking for