OU based Device Collection Membership not updated frequently

Hi,
I have create one OU based device Collection and checked Used incremental updates for this collection under Membership rules but whenever any Computer object moved form this OU to another OU than such Device is not removed
from same OU based Device Collection... the Collection membership change is not happening properly even after i did update membership of that OU based device collection..
My requirement is whenever any Computer object added or removed in/from any OU in AD than the membership of corresponding OU based device collection should up updated within 5-10 minutes how i can do this .
To achieve this I done below configuration but its membership of the collection not updated... please guide..
Shailendra Dev

To add to Jorgen, note, there is going to be more to it than just AD discovery.
What exactly does your query look like?
Exactly how often is both your Hardware inventory and Heartbeat discovery set to? Do you have SW inventory enabled?
Just to get thing out there IMO the requirement updated within 5-10 minutes is nuts.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Similar Messages

SSCM 2012 R2 IP Subnet based Device Collection

HI,
I have to create a IP Subnet based Device Collection , are we have to install the ccm clients on all machines first to create the IP subnet based Device Collection??
Can you please share the step by step docs to create the IP Subnet based device collection in SCCM 2012 R2?
Shailendra Dev

Hello, As has already been mentioned this will require the SCCM client to be installed on the workstations to pick up the IP address and may require a Hardware Inventory cycle to have been ran (not 100% certain of the HW Inv requirement, give it a try without
and see!).
Create the collection as you would normally.
right click the collection and select properties. Click into the membership rules tab
select add rule > query rule
Type a name "IP Subnets" and then click "Edit query statement"
Click "Show Query language at the bottom and enter the below query making changes to the IP address.
select * from SMS_R_System where SMS_R_System.IPSubnets like "172.16.5%"
Update the collection membership. Job done.
I am not sure how whether this information will remain bang up to date e.g. if a machine moves subnets it may not instantaneously update the data in the database regarding IP subnets.

Multiple IP Subnet Based Device collection

Hi ,
I have created Single IP Subnet based device Collection as below WQL.. and its working with
is like Operator and Value as 192.168.11.0
can you please suggest what would be the value if i have to create the Device collection upon 2 Subnets of 192.168.11.0 and 192.168.12.0
Currently i am able to enter only one IP Subnet in value txt box..
Shailendra Dev

You've got to use is like because the field you're checking on contains an array. In your new scenario use
192.168.1% to cover both subnets, but do keep in mind that it will also include all other subnets that start like that. In case you only want those two subnets simply create two separate membership rules.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Best Solutions For Offline Address Book on Workstations Not Updating Frequently Enough?

We use Exchange 2010 SP2 and we set Outlook 2010 to Exchange Cached mode by default for all workstations. This seems to work OK for the majority of email most of the time, but because we are very frequently adding and removing external mail contacts
and and adding and removing them from distribution lists, the GAL and distribution lists memberships are frequently out of date in the middle of the work day.
Sometimes the users can manually download an updated OAB assuming it has been updated on the server, but sometimes the OAB is not updated yet and redownloading the OAB solves nothing. It is a lot of hassle, confusion about bounced messages and
missing contacts and phantom names in distribution lists with this method.
I notice that for mail contacts, there is an All Contacts address book that is live, but it does not include include anything else other than contact addresses. Distribution List memberships are still out of date until the OAB is updated on the server
and then downloaded to the Outlook client. This is taking too long.
Is there a keyboard shortcut to force the client to do a GAL address lookup in online mode rather than using the cached OAB?
Can Outlook display both an online and offline address book for the GAL and let the user manually select online version of the GAL if a contact or new mailbox or DL has not synced to the OAB yet?
If we set the registry key to force online address books even when Outlook is in cached Exchange mode, is there any performance downside for PCs on the LAN other than the GAL being unavailable when the network is not available?
Would the Exchange server have a significantly higher load if most PCs were accessing the GAL without an OAB cache?
If we should not expect a significant increase in server load or network traffic, we might set desktops to use online access to the GAL and only laptops to use OAB.

Hi,
If users are accessing the GAL without OAB cache, definitely it will increase in server load and network traffic. If you are in cached mode, one suggestion is to define that in Send/Receive Settings:
Go to Send/Receive Groups -> Define Send/Receive Groups
-> Select the account and Edit -> Select
Include the selected account in this group, and check Download offline address book -> Click
OK -> Go back to Send/Receive Groups, select the frequency for automatic send/receive(Schedule an automatic send/receive every x minutes.), and then close.
I hope this setting can help in your scenario.
Regards,
Melon Chen
TechNet Community Support

OSD: install software DURING task sequence based upon collection membership

Hi,
I'd like to refer to my
previous post as a starting point.
Below again the background of my question. But please advise on a powershell script that runs at the end of a task sequence that:
*enumerates the pc's collection memberships and based upon that lists the software available
*puts this software in a variable and does the installation DURING the task sequence
J.
Background:
At this time, software in our deployment (of Windows 7) is installed AFTER the task sequence is finished.
The software is deployed based upon the computer membership of collections (which get their info from AD groups).
Problem is that users see their pc as finished but don't have all their software. It even takes sometimes more then an hour even when we refresh computer policy after final reboot of the system. That's why we really need a bulletproof solution = installation
of software DURING task sequence.
Jan Hoedt

I found some time to adjust the script. Now I've created something similar for a device. Basically it finds the collections of which the device is a member, finds the targeted applications and creates task sequence variables for those applications.
See for more information:
http://www.petervanderwoude.nl/post/install-computer-targeted-application-during-os-deployment-via-powershell-and-configmgr-2012/
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Account Based CO-PA Quantity Not updated in COEP-MEGBTR

Hello,
We use account based CO-PA. For certain Billing transactions, the quantity is not coming to the BW.
On analysis, we notice that the line item document created in COEP table is not updating the quantity field MEGBTR but only the field MBGBTR.
Not sure what is cuasing these transactions to post differently.
Thanks for your help. Murali

Could you please check note 105747, 911203, 353643 or 188724, This does not pertain to ECC6 but possibly earlier releases.

Prepare-Move-Request - membership not updated

Hi,
At executing Prepare Move Request, I get problems with updating security group membership(2 security groups in the following screenshot). Updating distribution group membership is OK(1 distribution group in the following screenshot).
The distribution group and the security groups were previously manually created at target forest.
The question is:
Does "PrepareMoveRequest" update only distribution group membership?
Thanks in advance!

Hi Lynn-Li,
The problem remains the same.
The test mailbox account (source forest) is member of 3 security groups (1 universal, 1 global, 1 domain local) and 3 distribution groups (1 universal, 1 global, 1 domain local). The security groups were manually created at target forest with same
name,type and scope. At target forest the distribution groups are universal.
In the following screenshot the membership of distribution groups are updated, but the mermbership of security groups are not updated.
The questions are:
Is the above problem with security groups membership the normal behavior with Prepare-MoveRequest script?
Thanks in advance!

AD Group membership not updating in Sharepoint Foundation when adding Active Directory group to Sharepoint group

I have Sharepoint Foundation installed with the latest CU updates. It is running on a VMware box (Windows Server 2008 R2 Standard) with its backend on a SQL Server 2008 R2 vmware box. The farm account is a domain user and has been given all appropriate
replication rights, etc to active directory.
Everything seems to be working fine except for security integrated with AD groups. When I go to edit permissions I can add individual AD users just fine and remove them just fine and their access is taken away right away or given to them right away.
I can also find AD groups in the people picker and add them to the site. When I add new groups to AD, they are found immediately within Sharepoint, and when I delete groups from AD, they are taken out of the people picker right away. Now comes
the weird part. When I add an AD group to the site, all users currently within that AD group are given access to the Sharepoint Site. This works for the first time only. Now when I add or remove users from the AD groups, it does not update
in SharePoint. For example, I have an AD testuser1 in the AD Group "All Users". testuser1 does not have access to SharePoint. So I add the AD group to the Sharepoint group "Visitors". testuser1 now has read access to the sharepoint
site. Now, I remove testuser1 from the AD group, but testuser 1 still has access to the site even though he is not part of the AD group, nor does he have any individual permissions to the site. Now, I add testuser2 to the ad group. testuser2
does not have access to the site, even though he is part of the ad group.
It seems that the only time AD group security is working for me is when I first initially add the AD group to the site. From then on, it's like sharepoint is caching the members of the group and not updating any new adds or deletes from the groups.
Any ideas? I am lost on where to go from here as I have tried everything from clearing cache files, rebooting servers, iisresets....

I think I have at least cornered the problem, but am not 100% sure yet that it is the correct answer. I think it could be 1 of the following 2 scenarios.
Scenario 1: We have 3 web applications setup on our web server ports 80 - Our sharepoint Web app, 2020 - Our My Site Web App, 2040 - Our Search Web app. We are using host headers (http://sharepoint.***.com) instead of a server name. So
we setup our access mappings (Central Admin -> Application Management -> Configure Alternate access mappings) to use the host header (http://sharepoint.***.com) as the default mapping and the server name as the intranet access mapping. By
setting the default access mapping to host headers, i noticed that Sharepoint automatically assumes that all web apps are on port 80. You can see this by going to (Central Admin -> Manage Web Applications). The port listed all 3 web apps on
port 80. So I think when I was doing a profile sync and using mysites, it was messing with my AD security because of this. What I did was the following. I went to Central Admin -> Manage Service Applications -> [Name of your user profile
service] -> Setup my sites. I made sure that my preferred search center had the correct port number on it (mine originally had no port number), that my my site host had a port (again no port number originally), as well as the personal site location.
I then saved this.
Scenario 2: Our user profile sync had 2 BDC connections that were corrupt and throwing errors. I rebuilt the connections, remapped them to the proper user profile property.
I did both of these scenarios above around the same time. I then restarted all my servers, and at last the AD Group security is now functioning appropriately. I have done multiple IIS resets and server restarts. The issue has only reappeared
once. After restarting the machine again, we were back to the AD groups functioning correctly. Because we had the issue reappear once after doing the above, I still do not feel 100% sure that either one of the above corrected the issue completely.
As long as we are up and running currently, I am moving on to other tasks with this project. My only concern that it will break again and I will have to revisit it is when we restart the servers....which is never fun. I will update as I find
a "true" answer to this issue.... Let me know if any of the above helped you or if you find something I may not have thought of.

Catalog group membership not updating

Hi,
I am experiencing a problem with my catalog groups. I have just created a new catalog group and added a user account as a member and also removed that user account from another group by logging in as administrator in answers and using settings - manage presentation catalog groups and users.
If i now log in as that user the membership hasn't updated and when I click on My Account for that user it still shows as a member of the old group and not the new one.
My security for users is done through LDAP and in Tools - Options in Admin console on the repository tab I have the LDAP Cache refresh interval set to 1 minutes.
I know if I restart the presentation services that it will work ok but I don't want to have to do that as I have users using the system.
Any advice would be appreciated.
Thanks
Patricia

hi,
you can try to set in the instanceconfig.xml
the tags
--->
<CacheMaxExpireMinutes>2</CacheMaxExpireMinutes>
<CacheMinExpireMinutes>1</CacheMinExpireMinutes>
<CacheMinUserExpireMinutes>1</CacheMinUserExpireMinutes>
<ClientSessionExpireMinutes>10</ClientSessionExpireMinutes>
<SearchIDExpireMinutes>9</SearchIDExpireMinutes>
<---
they control the cache of the browser
check administrator guide for more informations
--check in other pc or check with an other browser at the same
i hope i helped....
http://greekoraclebi.blogspot.com/
Edited by: eejimkos on Jul 15, 2009 4:52 AM
Edited by: eejimkos on Jul 15, 2009 5:01 AM

Template based files in CS3 not updating

Hi! I'm having problems working with Templates in Dreamweaver
CS3. Basic operations like creating new template, defining regions,
etc, works normally except for Updating Files based on the template
action. It will display the Update Files status window but it won't
update the pages and it'll just stuck. Opening each file and doing
a "Update Current Page" works though. Your ideas? Thanks!

Here are seven common mistakes that will result in changes
not propagating
from Template to child -
1. Rename the Templates folder
2. Move the Templates folder to some other folder level in
the site other
than root level
3. Move a template out of the Templates folder.
4. Make changes to an editable region of the template (which
will not
propagate)
5. Assume that template changes can be uploaded to the server
without also
uploading the changed local files
6. Corrupt the site cache so that the link between template
and child page
is broken
7, Improperly create your child pages by simply opening the
template,
adding page specific content, and resaving the template with
an *.html
extension rather that its *.dwt extension. (you can tell if
this is the case
by looking at the code on a child page - if you see anything
like <!--
TemplateBeginEditable... then this is what you have done)
The 6th problem can be repaired by using SITE | Advanced >
Recreate Site
Cache, and the six others can be fixed by just not doing
them. Have you
done any of those?
Or, read this -
http://www.adobe.com/go/dd83ba8b
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"dealtph" <[email protected]> wrote in
message
news:fohel1$26b$[email protected]..
> Hi! I'm having problems working with Templates in
Dreamweaver CS3. Basic
> operations like creating new template, defining regions,
etc, works
> normally
> except for Updating Files based on the template action.
It will display
> the
> Update Files status window but it won't update the pages
and it'll just
> stuck.
> Opening each file and doing a "Update Current Page"
works though. Your
> ideas?
> Thanks!
>

Group membership on AD-bound server is not updating correctly

I have a 10.6.4 server that is bound to AD with Win2008 domain controllers. I am seeing group membership not update properly on this OS X server. If I type "id -p username" I don't get a full list of groups the user is a member of. If I launch Workgroup Manager, all of the groups are listed. I am using the box as a Subversion server and need the group updates to propagate from AD for Apache authentication to work correctly. Any ideas as to why the propagation is not happening? Is there a way I can flush whatever cache might be causing an issue? Can the group membership list be "refreshed"?

Yes, we are using Initialization Blocks to update the User Groups. Our USER_PERMISSION table has Login, Company_ID, Roles, etc columns in it. The Initialization Block will query on this Table and the query has a where clause in it and the Where clause "where company_id=(select substr(':USER', 0, (instr(':USER', '.')) - 1) from dual) and upper(login)=upper((select substr(':USER', (instr(':USER', '.')) + 1) from dual))) and dw_delete_date is null" from which it will get the roles for each user. And YES, the Caching is turned off for this initialization block.
And I should try deleting the user folders, but my company has a very strict policy so I should do that in DEv, then QA and in PRD. Hope this works, but I am still not convinced why this is happening. We cannot keep on deleting the user folders in future if this happens again.

Device Collections vs Reports

Fairly new user to System Center 2012 here, so still trying to learn the ins and outs.
Last Thursday, we deployed new software to every PC in our environment. The deployment uninstalled the old application and installed the new one. The job itself was a success (not bad for my first one!).
Anyhow, I had built a SQL based device collection for each application so that I could monitor how many PCs have each application. Essentially, I wanted to watch one grow while the other declined.
I also built a report for each application based on what Add/Remove Programs is reporting so that I could have something to export to Excel to provide updates to management. We run software scans daily on all of our PCs and 90% physically remain
on the network all hours of the day.
My question is: Why is the device collection showing so many more computers having the new software than the report is? I would think they would both always report the same number. For example, the device collection shows 2021 members with
the new application, however the report shows 1565. The report makes it appear as though the deployment was a failure, but the device collection says otherwise. Today is day 5 so I just find it odd that it's taking so long for the report to catch
up. Maybe I've missed a setting to configure the clients to run an inventory scan daily?
Administration - Client Settings - Software Inventory - Occurs every 1 day effective mm/dd/yyyy 10:00AM.

Yep hardware inventory is the one you want.
Do you really need a software inventory every day?
http://be.enhansoft.com/post/2013/10/03/Slow-Software-Inventory-Cycle-in-SCCM-2012.aspx
You can also force a hardware inventory full / delta with the right click tools by now micro. it's a very good free addition.

Can not update an assignment block with on_new_focus

Hello Experts,
I have the following problem. I created a new component which is similar to the component BP_BPBT to create activities for Business Agreements. In the overview page of the business agreement in WebUI, I have now the assigment blocks "Plannend activities" and "Interaction History".
When I create a new activity in the assigment block "planned activities" with the new button and save the activity with the buttons "SAVE" or "SAVE AND BACK". The new created actity is shown, depending on the "Active Status" , in one of the assignment blocks "Plannend activities" and "Interaction History". When I create an another activity in the same way, the new actiity is not shown in the assignment blocks. But when I reload the page again, I can see the new created activity.
During debugging, I see, that the first creating activity is in the collection in the method ON_NEW_FOCUS. When I create an another activity, the collection is not updated. Here is my coding:
* get collection of dependent nodes
TRY.
      entity ?= focus_bo. "BuAg Entity
    CATCH cx_sy_move_cast_error.
      RETURN.
ENDTRY.
TRY.
lr_entity = entity->get_related_entity( iv_relation_name = 'BuAgBuPaRel' ).
     lv_collection = lr_entity->get_related_entities(
         iv_relation_name = 'BuilInteractionHistoryRel'
* D022159: Performance optimization
         iv_mode          = lv_mode ).
Can anyone explain me, why the activities (after the first one) are not in my collection.
Can anyone help me to fix this problem?
Kind Regards,
John H.

Hi,
Please check if you have added your entity to collection after you save the entry. It looks like your value is saved in DB but its not reflected on UI because you are not refreshing your collection.
I would suggest that you write a code after you save and commit to refresh your collection of the context node.
Regards,
Bhushan

Numbers doc on my iPhone does not update on my iPad and vice versa. Why?

I have the same Numbers doc on my iPhone and my iPad. iCloud backup is turned "on" for both devices. Whenever I update the document on one device, it does not update on the other device. Is there something else that I need to do to make automatic updates happen? Many thanks, Mark

This solved the problem. "Use iCloud" was turned on in one device but not in the other. Many, many, thanks!!!

Provider hosted RSS feeds not updating

We are using RSS feeds to populate our Kentucky iTunes U site but our collections are not updating automatically within iTunes U. Is there a way to force RSS updating without having to delete the collection and then recreating the collection?

Hi Brian
iTunes U updates provider hosted feeds every 24hrs. If the collection in iTunes U hasn’t updated after 24hrs then I think there is a problem.
You can force refresh feeds from within Public Site Manager. Go to the collections page > Select the feed(s) you want to update > and then click the refresh button at the top of the page. I have to say, however, I have found this method to be a bit flakey – sometimes it works, sometimes it doesn’t. I have found that if it doesn't work first time it sometimes helps to navigate to another page in PSM, go back to the collections page and then try again, although. Sometimes when I do this I end up with muliple entries of the same item in preview but it seems to sort itself out when the page is published to live.
Tom

OU based Device Collection Membership not updated frequently

Similar Messages

Maybe you are looking for