Outlook 2007 won't start with 10.1.3 installed

Hi,
I'm trying to a do a fresh install of 10.1.3 on a windows XP machine that is running outlook 2007. The install goes ok but when I start Outlook I get the following error
"Cannot start Microsoft Office Outlook. Cannot open the Outlook window. The set of folders cannot be opened. Either you don't have sufficient permissions, the server does not support creating folders in this location or the server does not support certain characters in the folder name. Please try moving the folder or renaming it”
Does anybody know what could be causing this?
Thanks

Hi,
The user is an administrator on the PC.
I'd already tried installing into a fresh profile but I still get the same error message. I looks like something is trying to create a new folder when Outlook starts up and the Oracle Collaboration Suite does not like it But I can't work out what that could be. I can't turn on logging either because Outlook exits as soon as I acknowledge the message.
Thanks

Similar Messages

Outlook 2013 won't start with Exchange 2003 on the network

Hello All,
I have outlined my problem below, If someone could please help me that would be great!
Environment
==========
SBS 2003 Server Running AD and Exchange 2003
Clients are Windows 7 with Office 2013 and Outlook 2007 (to connect to existing 2003 Server)
Issue
=====
I am in the process of Migrating off of SBS 2003 to Office 365. The situation is that my customer needs to keep the SBS 2003 server until end of life where they will at that time determine a upgrade path. They however do not want to use Exchange
anymore. I have migrated their mailboxes successfully to Office 365.
The problem that I am running into is with Outlook 2013. Because Exchange 2003 server still exists in the network I am unable to launch Outlook 2013. I get a Message
"The Resource that you are trying to use is located on an unsupported version of Microsoft Exchange Contact your e-mail administrator for assistance"
I have tried to create a new Outlook profile. However since the exchange server exists still it auto discovers the server for the account.
Questions
========
1. What is the best workaround for this situation? My customer still needs to keep their SBS sever for their domain and plans on retiring the server before Server 2003 End of Life this coming server. (Upgrade is not an option, nor is getting
rid of the Domain, they are a small company).
2. If I disabled the Exchange services on the server would this work? Would outlook 2013 not detect Exchange
2003 on the network?
Basically I need to force Outlook 2013 to look at Office 365.
3. Configuring Outlook 2013 to manually connect to Office 365? The problem here is that how do I locate the server name for the manually connection? I have found some blogs that say to use Remote Connectivity Analyzer https://testconnectivity.microsoft.com/
but I cant seem to get that to work.
Any ideas?
Thanks!

Hi,
Please refer to the following article to check your migration steps from Exchange 2003 to Office 365:
http://blogs.technet.com/b/canitpro/archive/2013/05/31/step-by-step-migration-of-exchange-2003-server-to-office-365.aspx
If all mailboxes are moved to Office 365, Outlook 2013 would use Autodiscover service to connect to your Office 365. Please make sure your Autodiscover service is configured correctly in Office 365. Also
verify that all the DNS records and Public Folder are updated and pointed towards Office 365 services. If there is any question about migration to Office 365,
we can ask a question in Exchange Online forum for more suggestion:
https://social.technet.microsoft.com/Forums/msonline/en-US/home?forum=onlineservicesexchange
Regards,
Winnie Liang
TechNet Community Support

My macbook 2007 won't start up past the logo screen.

My macbook 2007 won't start up past the logo screen. I've tried to boot the computer off the install dvd that came with it but it comes up with a box saying that Mac OS X can't be installed on this computer. It has a yellow triangle over a hard drive in the box. What do I do?

You need to start the MacBook with the original DVD that shipped with the MacBook. then run disk utility on your hard drive to repair it, also repair your permissions.

HT3964 MacBook 2007 won't start up all of the way it gets the loading circle thing then it just keeps going and a bar thing pops up to load but doesn't and about a few minutes and it shut off. I don't have a disk for the computer or another Mac so what do

need help MacBook 2007 won't start up all of the way it gets the loading circle thing then it just keeps going and a bar thing pops up to load but doesn't and about a few minutes and it shut off. I don't have a disk for the computer or another Mac so what do I do?

I don't have the disk and i tried the shift key and it didn't do anything, i have tried like everything but it won't work and i was givin this computer with a charger and that is all nothing came with it and i don't think that it had the lion thing on it either i never got to that it just won't turn on and i have another mac that was a family members but it won't turn on either at all it won't load anything the screen stays black. so i don't really know at all what to do is there anything else? i don't want to take it anywhere because i have no money for that, and i need this computer for school. Any sugestions?

Outlook 2013 slow to start with Outlook 365 on Windows 7

Hi,
I get to work, start up my PC. It's windows 7.
The first thing I do is kick off Outlook 2013 which piggy backs off office 365.
It takes a minute for the splash screen to appear, another minute of watch dots fly across the splash page then a minute while add-ins get applied.
Why does it take so long for the first two phases to complete?
What add ins do I actually need? I've disabled those I think surplus to requirements, but in reality if Outlook 2013/0ffice 365 need them why do they need to be added in at all?
Thanks.
K
Note: this post was originally at
http://answers.microsoft.com/en-us/office/forum/office_2013_release-outlook/outlook-2013-slow-to-start-with-outlook-365/45b18f1c-5c70-4d69-aea7-4562efbe147f?rtAction=1392808530575
but I have since been advised to post it here to.

Hi,
According to your description, outlook 2013 connects to Exchange online server very slowly.
If yes, we can try the following methods to narrow down the cause of the slow performance:
1. Try start your Outlook in safe mode, and check the launch speed;
2. Check if you have enabled Cache Exchange Mode, if no, enable it and try start Outlook, and check the launch speed;
3. Create a new profile with no email account, try start Outlook, and check the launch speed;
4. Create a new Profile with the other email account, try start Outlook, and check the launch speed;
Since the issue is related to Exchange online, I recommend you ask for help on our Exchange online forum:
http://social.technet.microsoft.com/Forums/msonline/en-US/home?forum=onlineservicesexchange
Thanks for your understanding in advance.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Macbook Pro about 2012 won't start with out power lead in and runs very very slow Maverick OS

Macbook Pro about 2012 won't start with out power lead in and runs very very slow Maverick OS?

Take each of these steps as needed, and check to make sure it hasn't been fixed with a reboot afterwards before trying the next step.
Backup your data if you haven't already:
https://discussions.apple.com/docs/DOC-1992
If you use Airplay, see https://discussions.apple.com/docs/DOC-6831
If you don't use Airplay, be sure to upgrade to 10.9.2, using this update:
http://support.apple.com/kb/DL1726
Make sure your hard drive is not over 85% full.
Make sure Spotlight is not indexing.
Make sure Time Machine is not running when you do other tasks.
Check to make sure you have not accidently/purposefully installed MacKeeper, as it will slow down your Mac:
https://discussions.apple.com/docs/DOC-3036
Remove any other system cache cleaning applications.
Reset the SMC:
http://support.apple.com/kb/ht3964
Reset the PRAM:
http://support.apple.com/kb/ht1379
Check to make sure there aren't any signs the power adapter might be damaged, or the wrong one*:
http://www.macmaps.com/frayguide.html
If there are still issues, you may need to replace the battery:
https://www.apple.com/batteries/replacements.html

I have win7, outlook 2007 tried to sync with icloud but i get an error message and the calendar is blank. Thanks apple? Any suggestions from the community?

I have win7, outlook 2007 tried to sync with icloud but I get an error message and my calendar is blank. I do not see my outlook calendar, on the left pane under all calandar I see my me account checked and all others are unchecked. I looked at icloud and all the data is in and the iphones syncl with ipad but something is not right with my PC Outlook. I cannot get back to the good old mobileme. Thanks APPLE? Any suggestions from the community?

This issue can be caused by corrupted cookies.
Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
* http://kb.mozillazine.org/The_page_is_not_redirecting_properly

How to synchronize Outlook 2007 Calendar and Tasks with my iPhone through use of iCloud

How can I synchronize Outlook 2007 Calendar and Tasks with my iPhone through use of iCloud?

Hello farar,
Thank you for the question. It sounds like you are trying to synchronize your Outlook Calendar with your iPhone using iCloud.
If you have not setup iCloud, the following resource has steps you can take to set up iCloud on your computer and your iPhone:
iCloud -Learn how to set up iCloud on all your devices
http://www.apple.com/icloud/setup/
Once you have iCloud set up, you can enable the Calendar setting in the iCloud settings on both your computer and iPad to sync your Calendar events. Use the following article for steps to enable this feature:
iCloud: Change iCloud feature settings
http://support.apple.com/kb/PH2613
Thank you for using Apple Support Communities.
Best,
Sheila M.

SatelliteU300 Won't start with AC power connected and fully charged battery

I just bought a U300-13U. It works great when battery is charging and AC is connected. However if left to charge up fully it won't start with AC connected. Unpluging the power or removing the battery and running on AC makes it work fine. Is this a 'feature' to stop overcharging or overheating the battery, or just a problem with this machine. I want to run with AC and battery both connected all the time as I have done with all my other laptops.
Any help appreciated.

Hello Andy
Friend of mine has this small U300 and everything work well. I have had it few weeks ago to test WXp installation and it works perfectly.
Please test it again very carefully and if the same happen again I recommend you to contact Authorized service partner in your country. Let them check your notebook. I must be honest and say that described issue sounds strange to me and please do not wait too long. Contact service as soon as possible.
Bye and good luck!

My PC won't start with only one push of the start button.

hi guys my pc won't start with only one push of the start button. It takes me 1 to 10 pushes for it to start. I encountered this main bios error once when my pc started but it fixed on its own. What could be the problem?

Hi
The problem can be fixed by running a latest BIOS Update on your unit or if it is a mechanical issue it could be the power button itself.. you can call HP tech support if the notebook is still in warranty.. they'll be able to help you.
Hope this helps.
***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
-VJ
Although I am an HP Employee, I am speaking for myself and not for HP.

PowerMac DP G4 Won't Boot With All RAM Sticks Installed

A few weeks ago, my 800 MHz dual-processor G4 started having frequent kernel panics. I tried all sorts of things, including changing the PRAM battery, resetting the firmware, and resetting the PMU. Then, one day, it would only power up but not boot, so I took it in for repairs.
The shop I took it to determined that the logic board was malfunctioning and replaced it. The computer no longer has any kernel panics.
The machine was designed for three 500 MB RAM sticks, which is what it had ever since I bought it over five years ago. Now, apparently, it won't boot with the last one installed, though it will with two. The shop replaced the new logic board and and even swapped RAM, but the problem still persists. Neither the power supply nor the hard drive appear to be malfunctioning.
Does anyone have any ideas what's going on? Any ideas or advice would be greatly appreciated.
Thank you.
G4 800 MHz Dual Processor Mac OS X (10.4.9)

squeakmaster, welcome to Apple Discussions.
Have you tried the following with one 512MB RAM stick:
1. Palce it in the first RAM slot. Does the Mac boot?
2. If so, remove the stick & place it in the second RAM slot. Does it boot?
3. If so, remove the stick & place it in the third RAM slot. Does it boot?
The results of this test should reveal (1) if the stick boots in one or more RAM slots, the RAM is good and (2) if it fails to boot in a RAM slot, there is a problem with that slot.
Do this with each of the tree RAM sticks & post back the results.
When the logic board was replaced, was the firmware updated to be compliant with OS X. (Note - The firmware is installed on a chip on the logic board.) Check your Mac's firmware (Boot ROM version) version. Mac OS X: Available firmware updates
http://docs.info.apple.com/article.html?artnum=86117 If an update is required, the update must be installed (using OS 9) BEFORE you install OS X.
Can you boot up in OS 9.x? If so you can use DIMM First Aid - Check & recover disabled (missing) RAM from Apple's latest firmware updates http://www.versiontracker.com/dyn/moreinfo/macos/10415
 Cheers, Tom

Firefox won't open links from Outlook when FF is started with admin privileges

OS: Windows 7 64 bit
I usually start Firefox from a toolbar (PowerPro) which runs with admin privileges. Thus Firefox starts with admin privileges too. Under this condition links in Outlook won't open in Firefox.
But if I start Firefox with normal privileges the links in Outlook works as expected.

Under Tools > Options > Advanced look to see if the "check if Firefox is default browser on startup" Check this and then restart FF. If it isn't the default it should ask if you want to make it the default. Choose yes and it should open when clicking links again.

Tungsten E & Outlook 2007 won't sync

Hello. I just moved to a new laptop with Outlook 2007 and Win XP Pro. It's the same exact setup I had on my old laptop, but now my Palm E2 won't sync. I've reinstalled the latest Palm software and Outlook conduits twice, and done a hard reset on my Palm E twice. The sync appears to run as if there is no problem, but nothing updates. The log says each sync ran correctly:
HotSync operation started 09/27/10 09:58:30
OK Calendar
OK Contacts
OK Tasks
OK Memos
OK Note Pad
Quick Install - Sync configured to Do Nothing.
System - sync configured to Do Nothing
HotSync operation complete 09/27/10 09:58:34
But nothing actually updated. I am showing data that's weeks old (I had given up and decided just not to use my Palm any more, because I was so frustrated). Can you help?
Thanks.
Toni
Post relates to: Tungsten E

You stated you installed the latest version of PD. Is it 6.2? Go to help-about to check the version number.
If you do, go to start-programs-palm-PIM conduit sync and change the sync to Outlook. The Outlook 2007 conduits are built-in in 6.2. See if this may work.
In hotsync manager, does it show (Outlook) beside each of the 4 basic conduits?
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/wps/portal/kb/na/tungsten/e/unlocked/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

Hoping for some help with a very frustrating issue! I have been syncing my iPhone 5s and Outlook 2007 calendar and contacts with iCloud on my PC running Vista. All was well until the events I entered on the phone were showing up in Outlook, but not

Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance!

Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance!

Outlook 2007 won't open .pst file from Outlook 2000

I have been using Outlook 2000 for 10 years and hit the 2GB limit. As a result, Outlook 2000 would not open mail and did not permit me to delete mail to clear space.
I’d been meaning to install my Office 2007 and this seemed like the time to do so. Once installed, I attempted to open my 2 GB PST file in Outlook 2007. No luck.
Messages: “The message interface has returned an unknown error. If the problem persists, restart Outlook.” And “Cannot display information. There is either a problem connecting to the server or an error has occurred.”
Researching on the Web, I found Microsoft guidance that I could create a new data file and import the old (ANSI) .PST file into this new (Unicode) .PST file. When I did
that, during the Import, I encountered another error message: “The file has reached its maximum size. (Followed by two unhelpful sentences – can’t be imported).”
OK, I think, I have to reduce the size of that file. Research yields Microsoft’s “oversized PST and PST crop tool.”
http://support.microsoft.com/kb/296088 I do that and follow the instructions to scan the truncated file with Microsoft’s
scanpst.exe tool, which is included with Office.
Another error: scanpst.exe will not complete its scan. I receive a mysterious error message with no indication what the exact problem is. I created multiple versions
of the truncated .PST file, each smaller than the last, so that the smallest was 1.7 GB. Still errors with scanpst.exe and ultimately no luck.
I have spent more than 10 hours trying to solve this problem and am at wit’s end. I’m a freelance writer, and it’s costing me money. What’s worse,
info on projects I’m supposed to be working on are locked in that PST file! All data is stored locally on a Dell laptop with Windows 7.
Help anybody? Please? Thank you!

Fifteen hours later, I was back in business, having upgraded from Outlook 2000 to Outlook 2007, a process one would expect to take a half-hour tops. I'm no IT pro, but
I am pretty accomplished at fixing problems. This one seemed beyond my reach, as neither of the utilities Microsoft recommended to address the issue, the truncation tool and scanpst.exe, worked -- what a surprise! I engaged a local technician to diagnose the
problem remotely, and over a course of four hours he fixed it using a third-party program called "Outlook Recovery Toolbox." I'd actually downloaded that tool and fooled around a bit, but didn't use it for a full scan as I think that required a purchase, and
who knows if it's malware or what. Well, it worked.
So 15 hours lost. That cost me hundreds of dollars as I am self-employed, plus I have a $150 bill from the technician, which is more than fair for his two hours of labor
(the extra two hours were scanning and importing time). Again, Microsoft managed to turn into an epic ordeal what the consumer expects to be a straightforward upgrade process.
Now I have Outlook 2007, oh boy! The first thing I notice is the inflexible mail header above the message body. WTF is that supposed to be? Who was the Einstein who thought
that up? It renders USELESS like an inch of real estate right in the center of the screen! I find that it can be hidden (not, of course, with a simple, convenient and sensible right click ... oh NOOOO ... but through multi-click options available in the toolbar).
(For background, Outlook 2000 did not have that inflexible mail header -- the header info (subject, date, sender, CC) was part of the email, so if you scrolled down the
email, the header went with it and made the best possible use of available space).
Now here's a twist -- Outlook does not show, in your list of emails, whether an email has an attachment if the email was sent via Lotus Notes. That was a glitch in 2000,
and one I would expect to have been resolved in 2007. BUT NO. So, just moments ago, I have an email/meeting invitation sent from a client using Lotus Notes. Even though I had told Outlook to hide headers, it disobeyed me ...
why? Because this was a "meeting invite" email, offering me options, in that stupid inflexible header, to Accept, Decline, Propose New Time, & etc. Well, those options only increased the size of that inflexible header, so that the visible area of
the email WAS LESS THAN ONE INCH HIGH. Yes, I can adjust it -- how very productive!
These two Microsoft glitches / manifestations of poor design -- no alerting to attachments from Lotus clients and that horrid header -- very nearly conspired to cause
me to miss a critical attachment displayed only at the very bottom of the email. The document attached needs to be read and commented before the meeting, and only by the grace of God did I happen to scroll, IN THAT 3/4 INCH MAIL WINDOW, to the bottom and happen
to spot said critical attachment.
Do I expect anything more from Microsoft ... other than more grief and stupidity? Sadly, I do not. It is my misfortune in life to have to use Microsoft Word on a daily
basis, as I have for the past 10 years.
Before that, I used WordPerfect and what a wonderful program it was! I recall using WordPerfect to write and design one lovely graphical document in particular that earned
me an A+ in class. WordPerfect was so easy and powerful, with virtually no hassles—just gratification. Is it better to have loved (WordPerfect) and lost, than to have never loved at all?
Unfortunately, since all my clients use Word, I have to as well. Frankly, and I hope this isn’t against board rules, I am merely speaking the truth as I see it—Microsoft
Word is an utterly wretched application that has caused me untold grief and aggravation. Bulleting, text boxes, fickle fonts, the list is very, very long …. But it only gets worse!!!
The whole .doc .vs
docx is a complete debacle; the “Compatibility Pack” is a cruel joke. If I use Word 2000 on .docx documents, here are some of the inconveniences and frustrations that I encounter:
Bulleting function grayed out
Spelling errors not highlighted
Additional linespaces introduced into printed documents
Mysterious transposition of bold, italics and underlining
Inability to work with text boxes (“Error! Reference source not found!”)
Track Changes not accurately recorded
These are not incidental issues. I’m a spelling bee champion, but unless the spelling highlight function works, I am bound to have a typo or two in a 20-page document.
This affects the quality of my work and my livelihood.
To make matters worse, my Windows 7 often won’t find .docx documents. If I had worked on a .docx document something four months that I recall included the word
“Rumplestiltskin,” the Windows 7 Find function should locate it, but it does not.
I could go on and on. How about the dismal wireless connectivity in Window 7, vs. XP, which was virtually flawless. But I’m trying to catch up on the 15 hours that I lost yesterday thanks to Microsoft’s
awful Outlook troubleshooting and upgrade functionality.

Outlook 2007 won't start with 10.1.3 installed

Similar Messages

Maybe you are looking for