Outlook (MS Office for MAC2011) appears to be using up to 67% of my CPU time even when I'm doing nothing. Also, immediately after installing Mountain Lion, log-ins to the OS and normal operations noticeably slowed. Suggestions?
After installing Mountain Lion, I experienced a noticeable reduction in performance. When I log-in, I must wait several seconds for the cursor to become effective in the log-in window. When I come out of standby mode, I have the same issue. Also, when looking at cpu usage, Outlook appears to be using up to 67% of cpu when not doing anything. I'm not happy with this result.
Does anyone have suggestions as to how to fix?
Uninstall Office and reinstall it
Use these instructions to do it and do not omit any of them.
Similar Messages
-
This is a large format printer used for proofs that I cannot use since upgrading to Mountion Lion, anyone else had printer issues?
Checked RoaringApps App Compatibility Table. These are apps not drivers but..
All I see listed is:
- Epson LFP Remote Panel 3.6.1 and with a ? under Mountain Lion
- Epson Printer Utility 4 8.6.1 and red X indicating non-compatibility with Mountain Lion
- Epson Scan 3.7.5 and a green check mark showing compatibility with Mountain Lion
http://roaringapps.com/apps:table/tags/_e/index_tags/_e
On the Epson Website. Under Drivers and Downloads for the Stylus Pro 7700 with Mountain Lion, it looks like there is:
Drivers:
- Printer Driver v8.63
Utilities:
- Remote Panel 2 Utility v1.30
- Uninstall Center v1.1.0
Firmware:
- Firmware Update version KND14BA
Epson Stylus Pro 7700 Printer - Drivers & Downloads
Did you download and install all of these from the Epson website? -
After installing Mountain Lion on my Imac, volume keys and scroll function are disabled.
I just installed Mountain Lion on my 2 year old Imac and now the keyboard volume controls don't work and the scroll function on my magic mouse has stopped as well. All these were working fine until the install. I have seen other posts of people having the same problem but haven't seen any definite solutions yet. Really annoying "benefit" to upgrading.
For the mouse scrolling issue, check the setting in System Preferences > Accessibility > Mouse & Trackpad > Mouse options... button > check Scrolling.
-
Help!
Hi,
Mac OS: Long Delay Before Web Pages Start to Load, Then Load Suddenly at Normal Speed
*I tried entering a manual DNS*
If you have not tried Open DNS, go here. Open DNS
Just click the computer icon and follow the instructions.
Empty the Cache. To empty the cache memory go to the Safari menu and click 'Empty Cache
Reset Safari go to the Safari menu and click 'Reset Safari.. select the first 5 buttons and click Reset.
To delete Safari's icon cache using the Finder, open your user folder, navigate to ~/Library/Safari/Icons and delete its contents.
Carolyn
Message was edited by: Carolyn Samit -
After installing Mountain Lion on my Mac Book Pro, I can no longer access two shared drives. Diagostics cannot solve the problem. I am using Parallels to run Qucikbooks ERP on these shared drives. How do I get my Mac to see these drives and access them?
Don't know what to tell you, but I also have an AEBS-Gen5 with a MBP Retina and Mac Mini using WiFi. Both are running Mountain Lion and I don't have any WiFi connection issues. Two iPhones in the household use WiFi with no issues along with a printer and 2 Windows 7 laptops.
First thing I would try is to shutdown all computers connected to the AEBS. Then power off the AEBS and finally the cable/DSL modem. Then reverse the order and power on the cable modem, wait for all the lights to be solid, power on the AEBS, wait for the light to show solid green; then power up a computer that uses WiFi.
If the above doesn't work, you might try repairing permissions via Disk Utility. If that doesn't help maybe a PRAM reset would work. -
After installing Mountain Lion on my 17" MBP G-RAID mini connected via Tempo SATA Edge ExpressCard34 is no longer recognized. I restored icon and access by removing 34 card and substituting FW800 for eSATA. Any fix for the higher speed connection? TIA
Looks like the Silicon Image drivers were moved to the incompatible software folder during install/upgrade.
Downloaded latest drivers, errored out of install claiming that the drivers were from an unknown author!!!
Emailed their tech support this evening describing problem. -
My macbook pro is very slow after installing mountain lion
my macbook pro is very slow after installing mountain lion? Is anyone else having this issue?
If you don't use an SSD and bump your RAM up to 8 Gb's you may experience slow speeds, but I noticed slow speeds with your general configuration in SL.
one thing you should consider right now is, Spotlight is Reindexing your hard drive, that takes time and resources, (resources which you don't necessarily have to spare).
If you continue feeling like your performance is slow, you have a few options with this computer (I have the same one).
the express card slot can house a wintec SSD drive. That little door on the side of your machine is pure gold for a really quick solution for speeding up your machine. I have one in mine right now i'm using as a scratch disk for CS6 but I used to boot from it, and the speed boost was out of this world.
You could take out the internal HDD and put in a new SSD (I have a Vertex 4 from OCZ) it is completely over kill but my experience is pretty fast and I keep up with the later MBP models colleagues have.
There are some other options for you like taking out the optical drive (however I don't know if I'm supposed to talk about that here). Google Data Doubler.
You need to also set it to always use the 9600 chipset, this will increase performance a lot too. to do this go to system preferences>energy saver>Better Performance. This switches the video card to the better one and makes a world of difference.
Lastly, your RAM. after an EFI Firmware update, our computer support up to 8GBs of RAM. Do it!
Late 08 MBP 2.53 GHZ 9600 chipset 8gb ram, Vertex 4 SSD -
After installing Mountain Lion, I tried to scan from my Canon MX870 and received the message: "MP Navigator EX quit unexpectedly. Click Reopen to open the application again. A report will be sent to Apple," This problem happened right after I installed Mountain Lion. I then downloaded Canon's upgraded software and drivers for the MX 870 and the problem was resolved. Now one month later, the problem has returned.
rjliii wrote:
Solved problem with original Canon software. When I downloaded Canon software upgraded for OS X 10.8, I got all by Navigator Ex. Noticed that on Canon's site, the upgraded version is 3.1; my app was 2.1. Upgraded to 3.1 for Nav. Ex, and it works.
You should still use Image Capture IMHO. If it was my gear, that's what I would do. No need to worry about software upgrades. -
after installing mountain lion I lost pictures in iphoto, lost my musisc in itunes, my icluod is not working, internet its very slow and some other issues. There is a way how to fix these issues
Open System Preferences > iCloud
Deselect the box next to Photo Stream then reselect it.
Now for your music. Launch iTunes. From the iTunes menu bar top of your screen click iTunes > Preferences then select the Store tab.
Select: Music. (and Apps and Books) if you want.
Click OK.
iCloud syncs via your Wi-Fi network so give it a minute or two to reset your photos and music.
Slow internet ... try turning off the modem for a few minutes, then turn it back on. -
HT1338 Why is my MacBook Pro running so slow after installing Mountain Lion 10.8.
Why is my MacBook Pro running so slow after installing Mountain Lion 10.8. I have restarted, created more free space on my hard drive and run disk utilities. Simple operations result 20 seconds or more of the spinning wheel. Some are so slow that the operation does not happen at all. Itunes music cuts out during operations.
Check out this article by Thomas Reed for help http://www.reedcorner.net/understanding-upgrade-nightmares/. Also, make sure all apps are compatible with Mountain Lion using www.roaringapps.com. Do you have any antivirus installed? Make sure all apps are updated as well.
-
Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!We're sorry.
We can't find the article you're looking for.
Please return to the Apple Support homepage.
Sigh. -
After installing Mountain Lion, why is there Yahoo access for one user but not another?--both are administrators.
We've had several instances where we have had to run chkdsk on arrays with over 1m files. Average completion time is approximately 72 hours. The maximum downtime window they have available is the 64 hour weekend window. File sizes and number of files were
much smaller then than they are now.
The idea, in theory, was to use VHDs to compartmentalize the data into smaller volumes which could be more easily managed. It would also improve performance when transferring these compartments of data as they would use sequential read/write rather than
fragmented/random. This idea was never fleshed out in entirety, they don't split data up into little containers, but simply into big ones per project. Hence the 11m files in one container that I am currently trying to diagnose.
Some other important facts: The VHD in question is mounted in B:/project/ as this server also allows remote workers to log in, but they are restricted to see only data in E:. Disks A-D are hidden via group policy.
Update: icacls is failing on a large number of files within this dataset. I counted the path characters to ensure it wasn't the 255 character limit I was encountering and verified that the paths being blocked are only about 150 characters long. Once it finishes,
I'll have to try taking ownership and then re-running it. At this point I still have no idea how long to expect. I'm running out of time as the environment will be in use again at 9AM tomorrow morning. -
Uptated to iOS 5 on my ipad2 and now all of my apps that weren't preinstalled on the iPad crash immediately after opening. I already tried restarting the ipad and that didn't work. I really don't want to have to do this with 100+ apps. Or sit through a complete restore...
Try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
-
After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. After 4 calls to apple and 8 and a half hours on the phone. The apple people does not how to solve the problem. The last thing they told me is that they will send the problem to their engineers and I will hear from them. unfortunately they have not contact me.
During the phone calls I tried putting the date and time in automatic, changing the username and password, I even tried using somebody elses username and password. Please help, facetime is my tool to telecomute, and it is hurting my job.I had the same problem and found the solution here:
https://discussions.apple.com/thread/3189272 -
How do I install Mountain Lion on both my iMac Desktop and my wifes MacBook
How do I install Mountain Lion on both my iMac Desktop and my wifes MacBook Pro?
Open the app store, purchase ML. go to second computer open app store select purchases at the top and click download. This is provided both computers use the same account.
http://www.apple.com/osx/how-to-upgrade/
Maybe you are looking for
-
Two values from a LOV to Timecard LDT
Hi, I have a requirement to pull two values from single LOV to Timecard layout page. e.g.: Suppose we have a LOV field 'emp_number' on layout and this field is getting value from one LOV. Query in LOV shows emp_number and emp_last_name. I want to put
-
Satellite A110-195 PSAB0E - sound card has stopped working
Hello, My sound card has stopped working it was working fine but suddenly the sound quality started to faint and finally it stopped working i have tried the following methods: Realtek is default audio Control Panel/ Sound & Audio Devices/ Audio tab/
-
Using path variable to CI under transaction file for DBTABLOG archiving
Hello Colleagues, I have to configure DBTABLOG archiving among others under transaction file. Here you have to configure archive path to the filesystem. E.g.this is the path to the development system: DEV23015\Interfaces\Outbound\Archiving_IDOCs\<FIL
-
How to select a directory path to inputfield in web dynpro abap?
Hi, Experts, I want to select a directory path into a inputfield as like in file_upload browse button but it select only a file but i want the whole directory to select can i achieve this please suggest me on this. Thanks in advance, Shabeer Ahmed.
-
Workflow triggered twice. Triggered using Message Control/Output Types
I created an output type for VA01. After creating (then saving) SO, workflow is immediately triggered which shouldn't be the case since I have to run program 'rsnast00' to trigger workflow. So workflow is triggered twice during the process. How do i