OVD best practices for app-specific views?

I have a requirement to create app-specific views of joined (OID+AD) ldap directory data. It occurs to me that logically I could take 2 approaches to this as laid out below as option1 & 2. Although I'm not sure how to actually create option 2. I've listed the adapters i'd construct, the adapter type, and name/purpose of each. The end product of each option is 2 join adapters that present different app-specific views derived from the same source ldap data. Each join adapter would be consumed by different apps and present different subsets and transformations of that directory data.
OPTION1:
1 ldap oid1
2 ldap ad1
3 ldap oid2
4 ldap ad2
5 join oid1+ad1 (for app1)
6 join oid2+ad2 (for app2)
OPTION2:
1 ldap oid1
2 ldap ad1
3 ? oid2 (a transformed subtree derived from oid1)
4 ? ad2 (a transformed subtree derived from ad1)
5 ? oid3 (a transformed subtree derived from oid1)
6 ? ad3 (a transformed subtree derived from ad1)
7 join oid2+ad2 (for app1)
8 join oid3+ad3 (for app2)
With option 1, i would create create 2 OID and 2 AD adapters; repeating the connectivity configuration for each; and each adapter once deployed is going to establish its own pool of ldap connections to the source ldap servers. this is a little clunky as you scale it beyond the initial two app-specific views, and leaves me a little concerned about how well this model scales considering each ldap adapter is going to setup its own pool of connections. i.e. with 5 app-specific view to construct, i'd have 5 OID and 5 AD pools... seems to somewhat defeat the whole point of pooling.
Option 2 is predicated on the idea of creating 1 single ldap adapter in ovd for oid and another single one for ad; then create secondary adapters which pull and transform data from those two primary source adapters. No matter how many secondary OID & AD adapters I create, only the two primary adapters actually have pooled connections to OID and AD. The advantage here clearly is in how we manage and limit how many pools we are setting up. But I'm not sure what kind of adapter to use for oid2/3 and ad2/3. I looked at using a join adapter, configured not to actually join anything, but rather just pull from a single primary adapter, but I couldn't see any way to change the subtree being pulled from the primary adapter. The alternative might be to create ldap adapters that connect to oid1 and ad1... a loopback approach... but this gets us into pools on top of pools. Again, a little clunky.
Any thoughts or recommendations with regard to best practices here?

I haven't done this, so I haven't solved the problem as such. But those organizations who I've seen mention it either just get free apps via this process:
http://support.apple.com/kb/HT2534
or use a corporate credit card with the accounts. You can use a single credit card for all the accounts, to the best of my knowledge. There's also a Volume Purchase Plan for businesses which can simplify matters:
http://www.apple.com/business/vpp/
I believe that a redemption code obtained through this program can be used to set up an iTunes Store account, but I'm not certain.
Regards.

Similar Messages

Best practices for apps integration with third party systems ?

Hi all
I would like to know if there is any document from oracle or from your own regarding best practices for apps integration with third party systems.
For example, in particular, let's say we need customization in a given module(ex:payables) need to provide data to a third party system, consider following:
outbound interface:
1)should third party system should be given with direct access to oracle database to access a particular payments data information table/view to look for data ?
2) should oracle create a file to third party system, so that it can read and do what it need to do?
inbound:
1) should third party should directly login and insert data into tables which holds response data?
2) again, should third party create file and oralce apps will pick up for further processing?
again, there could be lot of company specific scenarios like it has to be real time or not... etc...
How does companies make sure third party systems are not directly dipping into other systems (oracle apps/others), so that it will follow certain integration best practices.
how does enterprise architectute will play a role in this? can we apply SOA standards? should use request/reply using Tibco etc?
Many oracle apps implementations customizations are more or less directly interacting with third party systems by including code to login into respective third party systems and vice versa.
Let me your know if you have done differently and that would help oracle apps community.
thanks
rrb.

you want to send idoc to third party system (NONSAP).
what kind of system is it? can it handle http requests
or
can it handle webservice?
which version of R/3 you are using?
what is the mechanism the receiving system has, to receive data?
Regards
Raja

Best practices for app store developer download

We use company-owned macs to develop iOS applications. We frequently need to access the app store to download free apps (such as Xcode and competitor's apps), but the developers don't want to enter their personal iTunes credentials on company macs to do this. The company does not want to enter their credit card to create a company-wide iTunes account for fear of weird charges ending up on their card. Furthermore, the reason Apple has logins to the app store is to tailor the experience to the individual, so having a company login for many people does not seem to be the way to go. What is the best practice for this? Does iTunes have an "Organization" level object and that entity can add iTunes users to it like the "Developer Teams" aspect for Apple developers?

I haven't done this, so I haven't solved the problem as such. But those organizations who I've seen mention it either just get free apps via this process:
http://support.apple.com/kb/HT2534
or use a corporate credit card with the accounts. You can use a single credit card for all the accounts, to the best of my knowledge. There's also a Volume Purchase Plan for businesses which can simplify matters:
http://www.apple.com/business/vpp/
I believe that a redemption code obtained through this program can be used to set up an iTunes Store account, but I'm not certain.
Regards.

Office Web Apps - Best Practice for App Pool Security Account?

Guys,
I am finalising my testing of Office Web Apps, and ready to move onto deploying it to my live farm.
Generally speaking, I put service applications in their own application pool.
Obviously by doing so this has an overhead on memory and processing, however generally speaking it is best practice from a security perspective when using separate accounts.
I have to create 3 new service applications in order to deploy Office Web Apps, in my test environment these are using the Default SharePoint app pool.
Should I create one application pool for all my office web apps with a fresh service account, or does it make no odds from a security perspective to run them in the default app pool?
Cheers,
Conrad
Conrad Goodman MCITP SA / MCTS: WSS3.0 + MOSS2007

i run my OWA under it's own service account (spOWA) and use only one app pool. Just remember that if you go this route, "When
you create a new application pool, you can specify a security account used by the application pool to be either a predefined Network Service account or a managed account. The account must have db_datareader, db_datawriter, and execute permissions for the content
databases and the SharePoint configuration database, and be assigned to the db_owner role for the content databases." (http://technet.microsoft.com/en-us/library/ff431687.aspx)

What is the best practice for changing view states?

I have a component with two Pie Charts that display
percentages at two specific dates (think start and end values).
But, I have three views: Start Value only, End Value only, or show
Both. I am using a ToggleButtonBar to control the display. What is
the best practice for changing this kind of view state? Right now
(since this code was inherited), the view states are changed in an
ActionScript function which sets the visible and includeInLayout
properties on each Pie Chart based on the selectedIndex of the
ToggleButtonBar, but, this just doesn't seem like the best way to
do this - not very dynamic. I'd like to be able to change the state
based on the name of the selectedItem, in case the order of the
ToggleButtons changes, and since I am storing the name of the
selectedItem for future reference.
Would using States be better? If so, what would be the best
way to implement this?
Thanks.

I would stick with non-states, as I have always heard that
states are more for smaller components that need to change under
certain conditions, like a login screen that changes if the user
needs to register.
That said, if the UI of what you are dealing with is not
overly complex, and if it will not become overly complex, maybe
states is the way to go.
Looking at your code, I don't think you'll save much in terms
of lines of code.

What are best practice for packaging and deploying j2EE apps to iAS?

We've been running a set of J2EE applications on a pair of iAS SP1b for about a year and it has been quite stable.
Recently however we have had a number of LDAP issues, particularly when registering and unregistering applications (registering ear files sometimes fails 1st time but may work 2nd time). Also We've noticed very occasionally that old versions of classes sometimes find their way onto our machines.
What is considered to be best practice in terms of packaging and deployment, specifically:
1) Packaging - using the deployTool that comes with iAS6 SP1b to package is a big manual task, especially when you have 200+ jsp files. Are people out there using this or are they scripting it with a build tool such as Ant?
2) Deploying an existing application to multiple iAS's. Are you guys unregistering old application then reregistering new application? Are you shutting down iAS whilst doing the deployment?
3) Deploying ear files can take 5 to 10 mins, is this normal?
4) In a clustered scenario where HTTPSession is shared what are the consequences of doing deployments to data stored in session?
thanks in asvance for your replies
Owen

You may want to consider upgrading your application server environment to a newer service pack. There are numerous enhancements involving the deployment tool and run time layout of your application that make clear where you're application is loading its files from.
If you've at a long running application server environment, with lots of deployments under your belt, you might start to notice slow downs in deployment and kjs start time. Generally this is due to garbage collecting in your iAS registry.
You can do several things to resolve this. The most complete solution is to reinstall the application server. This will guarantee a clean ldap registry. Of course you've got to restablish your configurations and redeploy your applications. When done, backup your application server install space with the application server and directory server off. You can use this backup to return to a known configuation at some future time.
For the second method: <B>BE CAREFUL - BACKUP FIRST</B>
There is a more exhaustive solution that involves examining your deployed components to determine the active GUIDS. You then search the NameTrans section of the registry searching for Applogic Servlet *, and Bean * entries that represent your previously deployed components but are represented in the set of deployed GUIDs. Record these older GUIDs, remove them from ClassImp and ClassDef. Finally remove the older entries from NameTrans.
Best practices for deployment depend on your particular environmental needs. Many people utilize ANT as a build tool. In later versions of the application server, complete ANT scripts are included that address compiling, assembly and deployment. Ant 1.4 includes iAS specific targets and general J2EE targets. There are iAS specific targets that can be utilized with the 1.3 version. Specialized build targets are not required however to deploy to iAS.
Newer versions of the deployment tool allow you to specify that JSPs are not to be registered automatically. This can be significant if deployment times lag. Registered JSP's however benefit more fully from the services that iAS offers.
2) In general it is better to undeploy then redeploy. However, if you know that you're not changing GUIDs, recreating an existing application with new GUIDs, or removing registered components, you may avoid the undeploy phase.
If you shut down the KJS processes during deployment you can eliminate some addition workload on the LDAP server which really gets pounded during deployment. This is because the KJS processes detect changes and do registry loads to repopulate their caches. This can happen many times during a deployment and does not provide any benefit.
3) Deploying can be a lengthy process. There have been improvements in that performance from service pack to service pack but unfortunately you wont see dramatic drops in deployment times.
One thing you can do to reduce deployment times is to understand the type of deployment. If you have not manipulated your deployment descriptors in any way, then there is no need to deploy. Simply drop your newer bits in to the run time space of the application server. In later service packs this means exploding the package (ear,war, or jar) in to the appropriate subdirectory of the APPS directory.
4) If you've changed the classes of objects that have been placed in HTTPSession, you may find that you can no longer utilize those objects. For that reason, it is suggested that objects placed in session be kept as simple as possible in order to minimize this effect. In general however, is not a good idea to change a web application during the life span of a session.

Best-practice for Catalog Views ? :|

Hello community,
A best practice question:
The situtation: I have several product categories (110), several items in those categories (4000) and 300 end-users. I would like to know which is the best practice for segment the catalog. I mean, some users should only see categories 10,20 & 30. Other users only category 80, etc. The problem is how can I implement this ?
My first idea is:
1. Create 110 Procurement Catalogs (1 for every prod.category). Each catalog should contain only its product category.
2. Assign in my Org Model, in a user-level all the "catalogs" that the user should access.
Do you have any idea in order to improve this ?
Saludos desde Mexico,
Diego

Hi,
Your way of doing will work, but you'll get maintenance issues (to many catalogs, and catalog link to maintain for each user).
The other way is to built your views in CCM, and assign these views to the users, either on the roles (PFCG) or on the user (SU01). The problem is that with CCM 1.0 this is limitated, cause you'll have to assign one by one the items to each view (no dynamic or mass processes), it has been enhanced in CCM 2.0.
My advice:
-Challenge your customer about views, and try to limit the number of views, with for example strategic and non strategic
-With CCM 1.0 stick to the procurement catalogs, or implement BADIs to assign items to the views (I experienced it, it works, but is quite difficult), but with a limitated number of views
Good luck.
Vadim

Best Practice for trimming content in Sharepoint Hosted Apps?

Hey there,
I'm developing a Sharepoint 2013 App that is set to be Sharepoint Hosted. I have a section within the app that I'd like to be Configuration-related, so I would like to only allow certain users or roles to be able to access this content or even see
that it exists (i.e. an Admin button, if you will). What is the best practice for accomplishing this in Sharepoint 2013 Apps? Thusfar, I've been doing everything using jQuery and the REST api and I'm hoping there's a standard within this that I
should be using.
Thanks in advance to anyone who can weigh in here.
Mike

Hi,
According to
this documentation, “You must configure a new name in Domain Name Services (DNS) to host the apps. To help improve security, the domain name should not be a subdomain
of the domain that hosts the SharePoint sites. For example, if the SharePoint sites are at Contoso.com, consider ContosoApps.com instead of App.Contoso.com as the domain name”.
More information:
http://technet.microsoft.com/en-us/library/fp161237(v=office.15)
For production hosting scenarios, you would still have to create a DNS routing strategy within your intranet and optionally configure your firewall.
The link below will show how to create and configure a production environment for apps for SharePoint:
http://technet.microsoft.com/en-us/library/fp161232(v=office.15)
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they
help and unmark them if they provide no help. If you have feedback for TechNet
Subscriber Support, contact [email protected]
Patrick Liang
TechNet Community Support

Best Practices For Household IOS's/Apple IDs

Greetings:
I've been searching support for best practices for sharing primarily apps, music and video among multple iOS's/Apple IDs. If there is a specific article please point me to it.
Here is my situation:
We currently have 3 iPads (2-kids, 1-dad) in the household and one iTunes account on a win computer. I previously had all iPads on single Apple ID/credit card and controlled the kids' downloads thru the Apple ID password that I kept secret. As the kids have grown older, I found myself constantly entering my password as the kids increased there interest in music/apps/video. I like this approach because all content was shared...I dislike because I was constantly asked to input password for all downloads.
So, I recently set up an individual account for them with the allowance feature at iTunes that allows them to download content on their own (I set restrictions on their iPads). Now I have 3 Apple IDs under one household.
My questions:
With the 3 Apple IDs, what is the best way to share apps,music, videos among myself and the kids? Is it multiple accounts on the computer and some sort of sharing?
Thanks in advance...

Hi Bonesaw1962,
We've had our staff and students run iOS updates OTA via Settings -> Software Update. In the past, we put a DNS block on Apple's update servers to prevent users from updating iOS (like last fall when iOS 7 was first released). By blocking mesu.apple com, the iPads weren't able to check for or install any iOS software updates. We waited until iOS 7.0.3 was released before we removed the block to mesu.apple.com at which point we told users if they wanted to update to iOS 7 they could do so OTA. We used our MDM to run reports periodically to see how many people updated to iOS 7 and how many stayed on iOS 6. As time went on, just about everyone updated on their own.
If you go this route (depending on the number of devices you have), you may want to take a look at Caching Server 2 to help with the network load https://www.apple.com/osx/server/features/#caching-server . From Apple's website, "When a user on your network downloads new software from Apple, a copy is automatically stored on your server. So the next time other users on your network update or download that same software, they actually access it from inside the network."
I wish there was a way for MDMs to manage iOS updates, but unfortunately Apple hasn't made this feature available to MDM providers. I've given this feedback to our Apple SE, but haven't heard if it is being considered or not. Keeping fingers crossed.
Hope this helps. Let us know what you decide on and keep us posted on the progress. Good luck!!
~Joe

BEST PRACTICES FOR CREATING DISCOVERER DATABASE CONNECTION -PUBLIC VS. PRIV

I have enabled SSO for Discoverer. So when you browse to http://host:port/discoverer/viewer you get prompted for your SSO
username/password. I have enabled users to create their own private
connections. I log in as portal and created a private connection. I then from
Oracle Portal create a portlet and add a discoverer worksheet using the private
connection that I created as the portal user. This works fine...users access
the portal they can see the worksheet. When they click the analyze link, the
users are prompted to enter a password for the private connection. The
following message is displayed:
The item you are requesting requires you to enter a password. This could occur because this is a private connection or
because the public connection password was invalid. Please enter the correct
password now to continue.
I originally created a public connection...and then follow the same steps from Oracle portal to create the portlet and display the
worksheet. Worksheet is displayed properly from Portal, when users click the
analyze link they are taken to Discoverer Viewer without having to enter a
password. The problem with this is that when a user browses to
http://host:port/discoverer/viewer they enter their SSO information and then
any user with an SSO account can see the public connection...very insecure!
When private connections are used, no connection information is displayed to
SSO users when logging into Discoverer Viewer.
For the very first step, when editing the Worksheet portlet from Portal, I enter the following for Database
Connections:
Publisher: I choose either the private or public connection that I created
Users Logged In: Display same data to all users using connection (Publisher's Connection)
Users Not Logged In: Do no display data
My question is what are the best practices for creating Discoverer Database
Connections.
Is there a way to create a public connection, but not display it in at http://host:port/discoverer/viewer?
Can I restrict access to http://host:port/discoverer/viewer to specific SSO users?
So overall, I want roughly 40 users to have access to my Portal Page Group. I then want to
display portlets with Discoverer worksheets. Certain worksheets I want to have
the ability to display the analyze link. When the SSO user clicks on this they
will be taken to Discoverer Viewer and prompted for no logon information. All
SSO users will see the same data...there is no need to restrict access based on
SSO username...1 database user will be set up in either the public or private
connection.

You can make it happen by creating a private connection for 40 users by capi script and when creating portlet select 2nd option in Users Logged in section. In this the portlet uses there own private connection every time user logs in.
So that it won't ask for password.
Another thing is there is an option of entering password or not in ASC in discoverer section, if your version 10.1.2.2. Let me know if you need more information
thnaks
kiran

Best practices for setting up projects

We recently adopted using Captivate for our WBT modules.
As a former Flash and Director user, I can say it’s
fast and does some great things. Doesn’t play so nice with
others on different occasions, but I’m learning. This forum
has been a great source for search and read on specific topics.
I’m trying to understand best practices for using this
product. We’ve had some problems with file size and
incorporating audio and video into our projects. Fortunately, the
forum has helped a lot with that. What I haven’t found a lot
of information on is good or better ways to set up individual
files, use multiple files and publish projects. We’ve decided
to go the route of putting standalones on our Intranet. My gut says
yuck, but for our situation I have yet to find a better way.
My question for discussion, then is: what are some best
practices for setting up individual files, using multiple files and
publishing projects? Any references or input on this would be
appreciated.

Hi,
Here are some of my suggestions:
1) Set up a style guide for all your standard slides. Eg.
Title slide, Index slide, chapter slide, end slide, screen capture,
non-screen capture, quizzes etc. This makes life a lot easier.
2) Create your own buttons and captions. The standard ones
are pretty ordinary, and it's hard to get a slick looking style
happening with the standard captions. They are pretty easy to
create (search for add print button to learn how to create
buttons). There should instructions on how to customise captions
somewhere on this forum. Customising means that you can also use
words, symbols, colours unique to your organisation.
3) Google elearning providers. Most use captivate and will
allow you to open samples or temporarily view selected modules.
This will give you great insight on what not to do and some good
ideas on what works well.
4) Timings: Using the above research, I got others to
complete the sample modules to get a feel for timings. The results
were clear, 10 mins good, 15 mins okay, 20 mins kind of okay, 30
mins bad, bad, bad. It's truly better to have a learner complete
2-3 short modules in 30 mins than one big monster. The other
benefit is that shorter files equal smaller size.
5) Narration: It's best to narrate each slide individually
(particularly for screen capture slides). You are more likely to
get it right on the first take, it's easier to edit and you don't
have to re-record the whole thing if you need to update it in
future. To get a slicker effect, use at least two voices: one male,
one female and use slightly different accents.
6) Screen capture slides: If you are recording filling out
long window based databse pages where the compulsory fields are
marked (eg. with a red asterisk) - you don't need to show how to
fill out every field. It's much easier for the learner (and you) to
show how to fill out the first few fields, then fade the screen
capture out, fade the end of the form in with the instructions on
what to do next. This will reduce your file size. In one of my
forms, this meant the removal of about 18 slides!
7) Auto captions: they are verbose (eg. 'Click on Print
Button' instead of 'Click Print'; 'Select the Print Preview item'
instead of 'Select Print Preview'). You have to edit them.
8) PC training syntax: Buttons and hyperlinks should normally
be 'click'; selections from drop down boxes or file lists are
normally 'select': Captivate sometimes mixes them up. Instructions
should always be written in the correct order: eg. Good: Click
'File', Select 'Print Preview'; Bad: Select 'Print Preview' from
the 'File Menu'. Button names, hyperlinks, selections are normally
written in bold
9) Instruction syntax: should always be written in an active
voice: eg. 'Click Options to open the printer menu' instead of
'When the Options button is clicked on, the printer menu will open'
10) Break all modules into chapters. Frame each chapter with
a chapter slide. It's also a good idea to show the Index page
before each chapter slide with a progress indicator (I use an
animated arrow to flash next to the name of the next chapter), I
use a start button rather a 'next' button for the start of each
chapter. You should always have a module overview with the purpose
of the course and a summary slide which states what was covered and
they have complete the module.
11) Put a transparent click button somewhere on each slide.
Set the properties of the click box to take the learner back to the
start of the current chapter by pressing F2. This allows them to
jump back to the start of their chapter at any time. You can also
do a similar thing on the index pages which jumps them to another
chapter.
12) Recording video capture: best to do it at normal speed
and be concious of where your mouse is. Minimise your clicks. Most
people (until they start working with captivate) are sloppy with
their mouse and you end up with lots of unnecessarily slides that
you have to delete out. The speed will default to how you recorded
it and this will reduce the amount of time you spend on changing
timings.
13) Captions: My rule of thumb is minimum of 4 seconds - and
longer depending on the amount of words. Eg. Click 'Print Preview'
is 4 seconds, a paragraph is longer. If you creating knowledge
based modules, make the timing long (eg. 2-3 minutes) and put in a
next button so that the learner can click when they are ready.
Also, narration means the slides will normally be slightly longer.
14) Be creative: Capitvate is desk bound. There are some
learners that just don't respond no matter how interactive
Captivate can be. Incorporate non-captivate and desk free
activities. Eg. As part of our OHS module, there is an activity
where the learner has to print off the floor plan, and then wander
around the floor marking on th emap key items such as: fire exits;
first aid kit, broom and mop cupboard, stationary cupboard, etc.
Good luck!

Best practice for external but secure access to internal data?

We need external customers/vendors/partners to access some of our company data (view/add/edit). It’s not so easy as to segment out those databases/tables/records from other existing (and put separate database(s) in the DMZ where our server is). Our
current solution is to have a 1433 hole from web server into our database server. The user credentials are not in any sort of web.config but rather compiled in our DLLs, and that SQL login has read/write access to a very limited number of databases.
Our security group says this is still not secure, but how else are we to do it? Even if a web service, there still has to be a hole in somewhere. Any standard best practice for this?
Thanks.

Security is mainly about mitigation rather than 100% secure, "We have unknown unknowns". The component needs to talk to SQL Server. You could continue to use http to talk to SQL Server, perhaps even get SOAP Transactions working but personally
I'd have more worries about using such a 'less trodden' path since that is exactly the areas where more security problems are discovered. I don't know about your specific design issues so there might be even more ways to mitigate the risk but in general you're
using a DMZ as a decent way to mitigate risk. I would recommend asking your security team what they'd deem acceptable.
http://pauliom.wordpress.com

Best practice for hierarchical DTOs?

Hi!
Can someone tell me the best practice for hierarchical DTOs?
Use case: I've got a User object which holds one Folder object, which in turn holds a Set of Folder objects (children).
class User {
Folder rootFolder;
class Folder {
Set children;
}Normally, I'd fetch the user data with the help of a DAO from the database, copy the requested properties into a User-DTO, which will be transfered to the view. But what about the Folder objects?
Should I create a Folder-DTO class and copy each Folder property into the respective DTO object - in other words: rebuild the whole hierarchy? Or is there a better solution?
Thanks a lot!
Walter

Normally, I'd fetch the user data with the help of a
DAO from the database, copy the requested properties
into a User-DTO, which will be transfered to the view.
But what about the Folder objects?
Should I create a Folder-DTO class and copy each
Folder property into the respective DTO object - in
other words: rebuild the whole hierarchy? Or is there
a better solution?It isn't recursive right?
So this is just a standard association.
How you handle it depends on usage.
As a guess perhaps you are thinking that you can only have one User DTO class. That isn't true. You can have several. For example one that contains the association and one that does not.
Or you have just one. And either it contains the association or you provide another mechanism that returns just the association given a specific instance of a User DTO (or some other identifier to the specific User.)

Best practice for a deplomyent (EAR containing WAR/EJB) in a productive environment

Hi there,
I'm looking for some hints regarding to the best practice deployment in a productive
environment (currently we are not using a WLS-cluster);
We are using ANT for buildung, packaging and (dynamic) deployment (via weblogic.Deployer)
on the development environment and this works fine (in the meantime);
For my point of view, I would like to prefere this kind of Deploment not only
for the development, also for the productive system.
But I found some hints in some books, and this guys prefere the static deployment
for the p-system.
My question now:
Could anybody provide me with some links to some whitepapers regarding best practice
for a deployment into a p-system ??
What is your experiance with the new two-phase-deploment coming up with WLS 7.0
Is it really a good idea to use the static deployment (what is the advantage of
this kind of deployment ???
THX in advanced
-Martin

Hi Siva,
What best practise are you looking for ? If you can be specific on your question we could provide appropriate response.
From my basis experience some of the best practices.
1) Productive landscape should have high availability to business. For this you may setup DR or HA or both.
2) It should have backup configured for which restore has been already tested
3) It should have all the monitoring setup viz application, OS and DB
4) Productive client should not be modifiable
5) Users in Production landscape should have appropriate authorization based on SOD. There should not be any SOD conflicts
6) Transport to Production should be highly controlled. Any transport to Production should be moved only with appropriate Change Board approvals.
7) Relevant Database and OS security parameters should be tested before golive and enabled
8) Pre-Golive , Post Golive should have been performed on Production system
9) EWA should be configured atleast for Production system
10) Production system availability using DR should have been tested
Hope this helps.
Regards,
Deepak Kori

"Best practice" for components calling components on different panels.

I'm very new to Swing. I have been learning from tutorials, but these are always relatively simple interfaces , in which every component and container is initialised and added in the constructor of a main JFrame (extension) object.
I would assume that more complex, real-world examples would have JPanels initialise themselves. For example, I am working on a project in which the JFrame holds multiple JPanels. One of these Panels holds a group of JToggleButtons (grouped in a ButtonGroup). The action event for each button involves calling the repaint method of one of the other Panels.
Obviously, if you initialise everything in the JFrame, you can simply have the ActionListener refer to the other JPanel directly, by making the ActionListener a nested class within the JFrame class. However, I would like the JPanels to initialise their own components, including setting the button actions, by using an extension of class JPanel which includes the ActionListeners as nested classes. Therefore the ActionListener has no direct access to JPanel it needs to repaint.
What, then, is considered "best practice" for allowing these components to interact (not simply in this situation, but more generally)? Should I pass a reference to the JPanel that needs to be repainted to the JPanel that contains the ActionListeners? Should I notify the main JFrame that the Action event has fired, and then have that call "repaint"? Or is there a more common or more correct way of doing this?
Similarly, one of the JPanels needs to use a field belonging to the JFrame that holds it. Should I pass a reference to this object to the JPanel, or should I have the JPanel use "getParent()", or some other method?
I realise there are no concrete answers to this query, but I am wondering whether there are accepted practices for achieving this. My instinct is to simply pass a JPanel reference to the JPanel that needs to call repaint, but I am unsure how extensible this would be, how tightly coupled these classes would become.
Any advice anybody could give me would be much appreciated. Sorry the question is so long-winded. :)

Hello,
nice to get feedback.
I've been looking at a few resources on this issue from my last post. In my application I have been using the Observer and Observable classes to implement the MVC pattern suggested by T.PD.(...)
Two issues (not fatal, but annoying) with this are:
-Observable is a class, not an interface; since most of my Observers already extend JPanel (or some such), I have had to create inner classes.
-If an Observer is observing multiple Observables, it will have to determine which Observer called its update() method (by using reference equality or class comparison or whatever). Again, a very minor issue, but something to keep in mind.I don't deem those issues are minor. The second one in particular, is rather annoying in terms of maintenance ("Err, remind me, which widget is calling this "update()" method?").
In addition to that, the Observable/Observer are legacy non-generified classes, that incurr a loosely-typed approach (the subject and context arguments to the update(Observable subject, Object context) methods give hardly any info in themselves, and they generally have to be cast to provide app-specific information.
Note that the "notification model" from AWT and Swing widgets is not Observer-Observable, but merely EventListener . Although we can only guess what reasons made them develop a specific notification model, I deem this essentially stems from those reasons.
The contrasting appraoches are discussed in this article from Bill Venners: The Event Generator Idiom (http://www.artima.com/designtechniques/eventgenP.html).
N.B.: this article is from a previous-millenary series of "Design Techniques" articles that I found very useful when I learned OO design (GUI or not).
One last nail against the Observer/Observable model: these are general classes that can be used regardless of the context (GUI/non-GUI code), so this makes it easier to forget about Swing threading rules when using them (essentially: is the update method called in the EDT or not).
If anybody has any information on the performance or efficiency of using Observable/ObserverI would be very surprised if this had any performance impact. If it had, that would mean that you have either:
- a lot of widgets that are listening to one another (and then the Mediator pattern is almost a must to structure such entangled dependencies). And even then I don't think there could be any impact below a few thousands widgets.
- expensive or long-running computation in the update methods. That's unrelated to the notification model itself.
- a lot of non-GUI components that use the Observer/Observable to communicate among themselves - all the more risk then, to have a GUI update() called outside the EDT, see remark above.
(or whether there are inbuilt equivalents for Swing components)See discussion above.
As far as your remark 2 goes (if one observer observes more than one subjects, the update() method contains branching logic) : this also occurs with the Event Delegation model indeed: for example, it is quite common that people complain that their actionPerformed() method becomes unwieldy when the same class listens for several JButtons.
The usual advice for this is, use anonymous listeners, each of which handles the event from only one source (and generally very close in code to the definition of that source), and that simply translates the "generic" event notification method into a specific method call of a Controller or Mediator .
Best regards.
J.
Edited by: jduprez on May 9, 2011 10:10 AM

OVD best practices for app-specific views?

Similar Messages

Maybe you are looking for