OvD - Database Adapter (connect to encrypted database)

HI,
Is it possible to connect OvD to an SQL Server 2005 Database with encrypted data ? We have configured the adapter, but we see the encrypted uid instead of clear text.
Any help is appreciated.
Thanks.
CI

Sorted this out:
Used custom URL and made sure that the OVD Manager IDE was not appending any additional information following the closing bracket of the URL.
The full successful URL was as follows with no values in any of the other fields:
jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=on)(ADDRESS = (PROTOCOL = TCP)(HOST = host1)(PORT = 1540))(ADDRESS = (PROTOCOL = TCP)(HOST = host2)(PORT = 1540))(CONNECT_DATA=(SERVICE_NAME=SNAME)))

Similar Messages

OVD Database Adapter w/ JDBC Thin Driver to 10G RAC DB Resource

I'm looking for feedback as to whether anyone has successfully consumed a RAC database resource through an OVD database adapter? If so, I am interested in what your host value in the adapter ui looked like.
I am successful with this connection only if I go against one of the RAC nodes directly, thus losing redundancy.
This is OVD 10G 10.1.4.3 on RHEL4
RAC DB 10G
I have tried:
(DESCRIPTION=(ADDRESS_LIST=(LOAD_BALANCE=ON)(ADDRESS=(PROTOCOL=TCP)(HOST=10.26.4.203)(PORT=1540))(ADDRESS=(PROTOCOL=TCP)(HOST=10.26.4.204)(PORT=1540)))
(DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = myhost)(PORT = 1540))(ADDRESS = (PROTOCOL = TCP)(HOST = myhost2)(PORT = 1540))(LOAD_BALANCE = yes)(CONNECT_DATA = (SERVICE_NAME = SCHTESTS)(FAILOVER_MODE = (TYPE = SELECT)(METHOD = BASIC)(RETRIES = 200)(DELAY = 5))))
(DESCRIPTION=(LOAD_BALANCE=on)(ADDRESS=(PROTOCOL=TCP)(HOST=myhost)(PORT=1540)) (ADDRESS=(PROTOCOL=TCP)(HOST=myhost2)(PORT=1540))(CONNECT_DATA=(SERVICE_NAME=SCHTESTS)))
OVD Manager seems to anticipate this format because it then rejects inputs on the host and port form fields which I take as a positive indicator.
Otherwise, this feels like taking shots in the dark...
Any assistance or feedback is much appreciated.
Mark

Sorted this out:
Used custom URL and made sure that the OVD Manager IDE was not appending any additional information following the closing bracket of the URL.
The full successful URL was as follows with no values in any of the other fields:
jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=on)(ADDRESS = (PROTOCOL = TCP)(HOST = host1)(PORT = 1540))(ADDRESS = (PROTOCOL = TCP)(HOST = host2)(PORT = 1540))(CONNECT_DATA=(SERVICE_NAME=SNAME)))

New Macbook Pro FileVault Encrpytion Paused "Connect power adapter to resume encryption"

Does anyone have information on what is causing the FileVault encryption error with OS X Yosemitie? I just purchased a new 15 inch 2.5 GHz (mid-2014) MacBook Pro and during the initial installation / setup I elected to use FileVault to encrypt my 250GB SSD. As the encryption process was completing, it gave me an error stating the encryption was paused and "Connect power adapter to resume encryption."
The MacBook Pro is connected to its power supply. I should note this is my second MBP, I had this same issue with the 1st MBP, which was returned to Apple and replaced with another new MBP. I just don't understand how Apple can release an OS with an option to encrypt the drive if it doesn't work.

So, after 30 minutes with a support person on chat I asked to be escalated. During the time I waited for the sr. tech to come online I decided the best course of action was to erase the disk and re-install Yosemite. The sr. tech came on and said they are very much aware of this issue and the solution is to erase the disk and re-install Yosemite. This was quite easy.
I followed these instructions which matched what the sr. tech provided: OS X Yosemite: Erase and reinstall OS X
Just be sure to erase the correct disk. For me it was the 2nd Macintosh HD in the list.
Also be sure to choose Mac OS Extended (Journaled) as the format, not Mac OS Extended (Journaled, Encrypted).
You'll need to re-install the included apps (Pages, Garage Band, etc.) by going to the App Store and choosing Purchased.
Hope this helps!

BizTalk 2010 SQL adapter connection to SQL2014.

I tried to connect BizTalk 2010 SQL adapter connection to SQL2014. The adapter found the database but the test connection said it would not connect.
Can this be done?
Kent Wallace
HMA BizTalk developer

HI Kent Wallace,
For this question, here is relevant discussion about BizTalk with SQL Server 2014, our community members' replies give good explanation about it.
Reference:
http://social.msdn.microsoft.com/Forums/en-US/f7916b02-795f-4954-b65c-2579cd623c96/biztalk-2013-and-sql-server-2014?forum=biztalkgeneral
hope it helps
Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I just bought a recertified Mac Mini, and I wonder if anyone here knows if it's possible to hook up my Mac flat screen LCD monitor to it using what adapters? I currently have a DVI to ADC adapter connected to my G4 Powermac.

I just bought a recertified Mac Mini core duo - it's not the newer model-, and I wonder if anyone here knows if it's possible to hook up my Mac flat screen LCD monitor to it and using what adapters? I currently have a DVI to ADC adapter connected to my G4 Powermac.
The company I bought it from is not Apple, and I may regret that. It was in my price range, though.
This is the first time I've used this community, and I've been a Mac owner since 2000. Thanks in advance!

when you say "Mac flat screen LCD", do you mean this:
http://www.ares-woo.com/christmas2005/images/pc_cine.jpg
if it is, you might wanna try this:
http://store.apple.com/us/product/MB570Z/A?mco=MTY3ODQ5OTY

Can I connect my iPad mini to a data projector using a lightning to 30-pin adapter connected to a 30-pin to VGA connector? Or will this only work with a lightning to VGA connector.

Can I connect my iPad mini to a data projector using a lightning to 30-pin adapter connected to a 30-pin to VGA connector? Or will this only work with a lightning to VGA connector?

The lightning to 30 pin adapter does not support video as per the item description in the Apple online store:
http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter
This adapter lets you connect devices with a Lightning connector to many of your 30-pin accessories.* Supports analog audio output, USB audio, as well as syncing and charging. Video output not supported.
You will need to the Lightning to VGA adapter directly
http://store.apple.com/us/product/MD825ZM/A/lightning-to-vga-adapter?fnode=3a
Or the Lightning Digital AV Adapter
http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter
If the projector supports HDMI input.

PI7.1 JMS Adapter - connect to NW6.40

Hello,
We are facing following problem on SAP PI:
We have a scenario where PI (version 7.1) is connecting to another SAP NetWeaver system (version 6.40). There is an application that reads/puts messages from/to JMS Queues running on this system. PI has to connect the JMS Provider of 6.40 system and read/put these messages from/to these JMS Queues.
This scenario worked fine till we used XI 3.0 (NW6.40). We configured sender JMS channel with link to remote JMS Server and parameter "force_remote".
After installation of new PI7.1 we noticed some issues:
1.the connection is unstable. Sending JMS messages from PI to NW6.40 queue works a while but then we get error like this:
Adapter Framework caught exception: Unable to write new JMS message body for message: 00237d29-13fc-02ed-ba85-01d046631592: ConnectorException: Connector for ConnectionProfile of channel: EON_CC_jms_rcv_omsmessageon node: 922834950 having object id: 70855b1c6c483e869982ea2fe9787b36 was unable to create a new javax.jms.TextMessage message: javax.jms.IllegalStateException: Session is closed.
2. we cannot read messages from JMS Queue of NW6.40 at all. The messages are there in queue, communication channel is running and succesfully connected to queue but no message is processed and no error shows in communication channel monitoring.
Has anybody solve similar problem with connection between 7.1 and 6.40 NetWeaver?
I think the problem can be backward incompatibility of 7.1 SAP JMS libraries against 6.40. If this is true then the question is whether it is possible to deploy old libraries and run them simultaneously with native 7.1 libraries?
Thanks

problem sorted - factory property settings were not configured correctly in JMS Adapter connection pool

Sftp receiver channel showing cannot connect to JCA adapter: connection timed out

Hello all,
my scenario is a FTP to SFTP
i am unable to access a public SFTP server from my landscape
1.please help what all checkpoints i need to monitor
2. i am using a proxy server to connect to public network , whose credentials have been maintained by me in my channel
my adapter is showing me the following error adapter : connection timed out

Hi Sudhant,
The timeout issue can be because the server is not reachable or not responding.
Please monitor the network connection and check if your request is able reach the target SFTP server.
regards,
Harish

Just purchased an 11" Mac Book Air, and I'm using it as a desktop. Is it ok to lea the power adapter connected all the time?

I'm using my macbook air as a desktop unit, with an auxiliary flat panel display, as well as an external storage drive and a CD/dvd drive. Is it safe to leave the power adapter connected to the computer all the time? Will the battery life get affected or shortened by being fully charged all the time?

Apple recommends that for best battery life, you allow the battery to discharge occasionally.
Here's a good link:
http://www.apple.com/batteries/notebooks.html

Hi everyone. My ipod classic was purchased in the year 2009. I'm unsuccessful in getting it charged either through a USB port of my laptop or through an apple adapter connected to DC. Please suggest me on my options. Thank you.

Hi everyone.
My ipod classic (160 GB) was purchased in the year 2009.
I'm unsuccessful in getting it charged either through a USB port of my laptop or through an apple adapter connected to DC.
Please suggest me on my options. Thank you.

Could be the battery. The following has cost and other information that may help: Apple - Support - Service Answer Center

Suddenly web pages that I've visited previously won't load. I right click , click on page info and it says-------Connection Not Encrypted--- How do I fix this??

Connection Not Encrypted..
A reply to correct this would be very appreciated!!!
Thank you.
Have a great day !

It is normal for pages accessed using the http:// protocol (rather than the secure sockets https:// protocol) to show the connection not being encrypted.
Generally speaking, when you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
(You also can clear Firefox's cache completely using:
orange Firefox button ''or'' Tools menu > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now")
(2) Remove the problem site's cookies (save any pending work first) using either of these. While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
Then try reloading the page. Does that help?

How to unblock youtube website? in page info states "connection not encrypted"

a few months ago i blocked youtube then i want to unblock it but i don't know how. i see in the page info that states
(website identity)
website: www.youtube.com
owner: this website does not supply ownership information.
verified by: not specified
(technical details)
Connection not encrypted
The website does not support encryption for the page you are viewing. Information sent over the Internet without encryption can be seen by other people while it is in transit.

I blocked youtube with this application http://downloads.phpnuke.org/en/download-item-view-y-y-m-b-v-a/YOUTUBE%2BBLOCKER.htm. I reset firefox but it doesn't work. is there another way to unblock youtube?

A favorite web-site that I used extensively with a previous Firefox version will no longer connect using Firefox 4.0.1 which I upgraded to this morning. The message says "Connection Not Encrypted". How can I access this important site?

The first message after Firefox fails to connect says "This website does not supply ownership information." Then is says "Connection Not Encrypted."
Yet my previous Firefox version connected readily to this same site.

I appreciate this option, to go back to an earlier version, but I really want to use the latest FF, so the counsel from cor-rel, about dealing with cache and cookies, is the solution I pursued. And it worked!
But thanks for responding to me. It's great to know that such support is out there.

Wired Adapter connecting to Wireless Network

New HP Laptop, wireless is AC generation, clean reinstall of Win 8.1 EnterpriseEvery other wired network adapter connects to the domain, shows
Adapter 1ofcdomain.local (yes, it's a .local, but nothing I can do about that now.Realtek whatever
Wireless adapters normally connect to OfcWirelessSomehow, for some reason, wired adapter shows up as connecting to OfcWireless rather than ofcdomain.localWhen booting up, wired will get folder redirection but not GPO mapped drives. gpresult shows user not in all security groups per AD expectations, but she has access to her restricted folders.Wireless is DHCP passthrough to server, that works fine throughout office.
Connection Sharing in wireless adapter is turned off (unchecked).When I set static IP in wireless, then back to automatic, the adapter tends to retain the gateway address.Wireless...
This topic first appeared in the Spiceworks Community

i took the IT Superhero quiz, and it made me a girl! so i tried retaking it until i got what i wanted, and finally, i just decided to reverse engineer their logic answers! it ended up being (somewhat) simple, and yet tricky to decipher, and so i decided to share my findings here at the Water Cooler to anyone in a similar predicament as me :Di highly recommend taking the quiz FIRST to see what you get (it IS rather fun), but once that is out of the way, feel free to have fun (i know i did). and don't forget to use your avatar if you like it!so basically, you just take the address of the Superhero quiz:
http://community.spiceworks.com/careers/sysadminday/superhero-quizand add the appropriate keys after it. for example:...

Cannot add Adaptive Connectivity Service to APS (FWM 02059)

Hello,
I finished installation of another instance of BOBJ 4.1 SP3 a while ago and now I am trying to split APS. At first time, I used System Configuration Wizard, and set slider from XS to S (spliting APS into 4 APS). SCW finished with FWM 02059 error saying:
The service container connected to the server ID xxxx does not support the service ID xxxx. (FWM 02059).
At second time, i've made 4 APS manualy, but when making APS with Adaptive Connectivity Service, error message above appeared again.
At this moment Adaptive Connectivity Service is not on any server and I am not able to add it anywhere.
Do you have any idea how to solve this issue?
Thank You
Tomas

Tomas, this is a known issue in SP 03. you should be able to find the KB article on SMP with the error message.
I think there is a script in the KB article which you can use as a workaround.
-Nikhil Nair

OvD - Database Adapter (connect to encrypted database)

Similar Messages

Maybe you are looking for