Over writing existing data

Hi gurus,
I am using two GUI_download,
The first one uploads the header of the table and the second one uploads the required data under those lables.
now when the first gui_download executes, the header is downloaded.
when the second gui_download executes, the data over writes the header data already present.
IN THE SECOND GUI_DOWNLOAD I AM USING APPEND = 'X'.
PlEASE HELP.

instead of using it twice , just call the same FM GUI_DOWNLOAD twice using PERFORM and passing different tables each time and with APPEND = 'X'.

Similar Messages

How to load the existing data from the databse in the CMP entity bean?

hello
my problem is as follows--
i am creating a CMP entity bean.in these beans client create the data instances using create() function.
now a entity bean will be created for the newly created data and it's EJBObject will also be formed.
now we will be able to perform finder methods over them.
remember these data has been newly created in the database.
but now if i want to perform the finder methods on the
existing data in the database( i don't need to use create() fn as i am not "creating" the data.). how will i perform the query over the existing data.
basically i have to make a CMP bean to extract the data corresponding to a particular condition , from the database table. i don't want to create the data in the database but just find out what data satisfies my condition.
thanking you
Prashant

you have to use findByXXX methods. depending on your appserver you may have to declare them (and eventually the query you want to be used) in the vendor specific deploiement descriptor.
(e.g. using jboss i don't remember having explicitly declare the findBySomeField method - where someField is a persistent field - in the dd, whereas with bas all finder methods have to be explicitly declared)
[note that obviously these methods have to be present in your home interface]

How to Enter the existing data in the entity beans?

hello
my problem is as follows--
i am creating a CMP entity bean.in these beans client create the data instances using create() function.
now a entity bean will be created for the newly created data and it's EJBObject will also be formed.
now we will be able to perform finder methods over them.
remember these data has been newly created in the database.
but now if i want to perform the finder methods on the
existing data in the database( i don't need to use create() fn as i am not "creating" the data.). how will i perform the query over the existing data.
basically i have to make a CMP bean to extract the data corresponding to a particular condition , from the database table. i don't want to create the data in the database but just find out what data satisfies my condition.
thanking you
Prashant

All I say here is based on limited knowledge on 1.1 ejb specification. There could be improvements on 2.0 spec. 1.1 specification does not formaly provide how the finders should work for container managed beans. It leaves it at the hand of bean providers. Currently bean providers describes the finers in a description of the Entity Bean. Refer to documentation accompanied with application server you are using.
I attach the famous bank account example in weblogic server.
<finder-list>
<finder>
<method-name>findBigAccounts</method-name>
<method-params>
<method-param>double</method-param>
</method-params>
<finder-query><![CDATA[(> balance $0)]]></finder-query>
</finder>
</finder-list>
Method definition in Home inteface is
public Enumeration findBigAccounts(double balanceGreaterThan)
throws FinderException, RemoteException;

If i already have a data carrier setting in my iphone 4, and i want a upgrade for the setting via itunes, will it write over my existing settings?

If i already have a data carrier setting in my iphone 4, and i want a upgrade for the setting via itunes, will it write over my existing settings?

You can set up more than one device on your computer, and iTunes will remember the settings for each of them:
How to use multiple iPods, iPads, or iPhones with one computer
But you'll have to use your Apple ID to sync bought media to her device. Disable all other things you don't want to sync like photos, contacts, etc.

Remote Time Machine backup over VPN, high data usage?

I have a remote Mac mini Server running 10.10.1 in a hosted environment. I'm attempting to perform a Time Machine backup from a MacBook Pro, also running Yosemite, over VPN.
While TM does see the AFP share over VPN and is backing up, it's been working at it for almost 36 hours now. I understand than uploading a lot of data takes time, but I noticed that Activity Monitor shows that over 30GB of data has been uploaded while the TM progress bar states that only 6.35GB (of ~20GB) has been transferred. Why such a difference? I know that VPN will introduce some overhead, but this just seems ridiculous.
Does anyone have any insight into what is happening? Better yet, can anything be done to fix it?
I actually purchased the mini server for the primary purpose of having remote TM backups, but this type of data rate and transfer is almost making it look impractical.

Time Machine is a very network intensive process, it has to check to see what files have changed this requires comparing between any existing backups and the Mac itself, it may have to prune existing backups to make more room this requires various commands, it of course has to copy new or altered files, it also has to verify all of this. On top of all this as you said the VPN system itself has an overhead and TCP/IP itself does so as well.
While >30GB vs 6.35GB does seem an excessive ratio it is not impossible. It should be noted even a local first backup (the biggest) can take a great deal of time, however typically subsequent backups are a lot smaller and hence quicker.
If you were able to do a local backup and do the same measurements of amounts transferred this would at least show if the amount is normal.

Questions about taking over an existing account

Hi,
I'm looking to take over an existing Verizon account with upgrade eligibility in August of 2012 and contract ending in December 2012. Here are my questions:
1. If I change the voice or texting plan (from unlimited minutes down to 450 mins/month), does that affect the contract length, or will it still end in December?
2. If I suspend the account until September, will the account still be eligible for an upgrade, or will I have to wait longer?
3. I want to take over the account now (March), suspend it until September, and then re-activate it and get the new iPhone when it comes out. Is this possible?
Thanks in advance for your help.

Will that affect the upgrade eligibility date? I would like to get the iPhone 5 when it comes out in Sept/Oct.
And you said "up to 12 months"...what determines the exact extension time?
Thanks

Cannot Copy over a existing file

Cannot Copy over a existing file to update the file, while the file is open by a different user.

No. It is locked to prevent writing of any kind.
Aandi Inston

For existing data in BI, client need to take a call to park the same from s

hi,
friends,
For existing data in BI, client need to take a call to park the same from safety point view by copying the existing ODS
is it possible?if it is possible give me details.
thanks&regurds
sivaji

hi,
well when you copy an ODS only the structure is copied. to load the data you might need to create transformation and DTp to load data in the new ODS.
You need to load data manually. Copying the ODS will only copy the structure.
Regds,
Shashank

APEX application development with an existing data model

Dear all,
We - as a company - are trying to build an application in ApEx with an existing data model. The idea is that the data model that has all sorts of TAPIs and business rules defined is going to be re-used in an ApEx environment. I am actually wondering whether this is possible, wise, feasible. When I am building some simple pages on one specific table, which has approx. 35 fields, sometimes the triggers around that table fail. Before I am actually going to dive in to try and sort these problems I am wondering whether this use of a data model in an ApEx environment is wise.
I mean, when you build an ApEx application there are usually no triggers and TAPIs available. My logic is that the ApEx application can look after validation and stuff.
Does anybody experienced have anything smart and useful to say about this. Any feedback is appreciated.
Kind regards,
-victorbax
-leiderdorp, the netherlands

Hey vik,
At my company we rarely use the standard APEX wizards because of multi-linguility (on data level) and error management issues.
We always create an API in PL/SQL and call the procedures for APEX making APEX the 'view' layer in a kind of model-view-controller architecture.
The main thing to keep in mind is maintainability, if you're working with an existing datamodel with an API that works it's probably best to just created forms and reports through APEX and then calling the appropriate pl/sql (packaged) procedure manually. We believe that this kind of architecture has the downside of being a little more work initially but it's much easier to maintain large projects through a self written API and take care of issues like error handling, logging and multi-linguility through a self written API.
Kind Regards,
Geert Guldentops

How do you remove back up data from the memory storage? my storage data states that i have over 80gb of data used for back ups and i dont know why as i use a external hard drive as a time machine .now my 250gb flash storage is nearly full

how do you remove back up data from the memory storage? my storage data states that i have over 80gb of data used for back ups and i dont know why as i use a external hard drive as a time machine .now my 250gb flash storage is nearly full.. HELP!

When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.

How can i restore old backup without deleting my existing data

how can i restore old backup without deleting my existing data. unfortunately i have deleted few of my old photos and restored them from my old backup. i got the deleted photos but lost my recent data and photos. how can i get those too.

You cannot. However, if your back up is through iTunes on your computer and you do an internet search for something like "iPhone BackUpExtractor", I believe there is software that will help you access the SQL database that is your back up. You may be able to pull out what you need.
Once you restore from a back up, any data that was on the phone is gone.

Error while writing the data into the file . can u please help in this.

The following error i am getting while writing the data into the file.
<bindingFault xmlns="http://schemas.oracle.com/bpel/extension">
<part name="code">
<code>null</code>
</part>
<part name="summary">
<summary>file:/C:/oracle/OraBPELPM_1/integration/orabpel/domains/default/tmp/
.bpel_MainDispatchProcess_1.0.jar/IntermediateOutputFile.wsdl
[ Write_ptt::Write(Root-Element) ] - WSIF JCA Execute of operation
'Write' failed due to: Error in opening
file for writing. Cannot open file:
C:\oracle\OraBPELPM_1\integration\jdev\jdev\mywork\
BPEL_Import_with_Dynamic_Transformation\WORKDIRS\SampleImportProcess1\input for writing. ;
nested exception is: ORABPEL-11058 Error in opening file for writing.
Cannot open file: C:\oracle\OraBPELPM_1\integration\jdev\jdev\mywork\
BPEL_Import_with_Dynamic_Transformation
\WORKDIRS\SampleImportProcess1\input for writing. Please ensure 1.
Specified output Dir has write permission 2.
Output filename has not exceeded the max chararters allowed by the
OS and 3. Local File System has enough space
.</summary>
</part>
<part name="detail">
<detail>null</detail>
</part>
</bindingFault>

Hi there,
Have you verified the suggestions in the error message?
Cannot open file: C:\oracle\OraBPELPM_1\integration\jdev\jdev\mywork\BPEL_Import_with_Dynamic_Transformation\WORKDIRS\SampleImportProcess1\input for writing.
Please ensure
1. Specified output Dir has write permission
2. Output filename has not exceeded the max chararters allowed by the OS and
3. Local File System has enough space
I am also curious why you are writing to a directory with the name "..\SampleImportProcess1\input" ?

How to over write VBBE data when Delivery is created if at the time of SO creation stock blocking is there

Hi,
I want to know how to over write VBBE data after delivery creation if stock blocking is there at the time of SO creation.
That means I want my confirmed delivery quantity to over write the SO quantity in VBBE table after delivery creation. Please help me with your valuable suggestions...
Thanks
Tanmoy

Hi Tanmoy,
This should happen automatically. The VBBE entry should reflect the quantity of the delivery requirement. Is it possible for you to post screenshots illustrating exactly what is happening on your system?

How to edit the existing data in the XML file from java programming.

Hi all
i am able to create XML file with the sample data as below from java programming.
i need sample code on how to edit the existing data in the XML file?
for example
<?xml version="1.0"?>
   <mydata>
           <data1>
                     <key1>467</key1>
                    <name1>Paul</name1>
                    <id1>123</id1>
          </data1>
          <data2>
                     <key2>467</key2>
                    <name2>Paul</name2>
                    <id2>123</id2>
          </data2>
    </mydata>
i am able to insert the data in the XML.
now i need sample code on how to modify the data in the above XML file from the java programming for only key2,name2,id2 tags only. the remaining tags data in the XML file i want to keep same data except for key2,name2,id2 which are i want to modify from java code
Regards
Sunil
[points will be always rewardable]

hi
u need a parser or validate the xml file for to read the xml file from java coding u need for this
xml4j.jar u can download this file from here
http://www.alphaworks.ibm.com/tech/xml4j
or we can use the SAX(simple API for XML)
some sample applications for this
http://www.java-tips.org/java-se-tips/javax.xml.parsers/how-to-read-xml-file-in-java.html
http://www.developertutorials.com/tutorials/java/read-xml-file-in-java-050611/page1.html
http://www.xml-training-guide.com/e-xml44.html
let me know u need any other info
bvr

I have reached full memory capacity on my 500GB Time Capsule. I am considering purchasing a 2TB Time Capsule. Do I need to resave all existing data on the new hard drive or can I start afresh? Or can I link both time capsules to operate independantly?

Hi,
I have reached full memory capacity on my 500GB Time Capsule. I am considering purchasing a 2TB Time Capsule.
a) Do I need to resave all existing data on the new hard drive or can I start afresh?
b) Or can I link both time capsules to operate independantly?
Thanks,
Paul

You may not need to buy a new Time Capsule.
You can connect a USB drive to the Time Capsule, and use it in addition to the TC's internal HD. You may need a powered USB hub as well.
Exactly what is on your TC? If it's only Time Machine backups, you may not need to do anything -- Time Machine will delete the oldest backup(s) automatically when it needs room for new ones. But if you have more than about 250 GB on your internal HD, that 500 GB may not be large enough to keep backups long enough.
If you have other data on the TC's internal HD, besides your backups, you could back up to the external HD and use the internal for the other data, or vice-versa. But TM backups cannot "span" two drives, and you shouldn't mix backups and other data on the TC's internal HD.

Over writing existing data

Similar Messages

Maybe you are looking for