Overdue report - how to
Hello,
I have date A and date B.
In routine I calculated number of days (A-B).
In Query Designer I want to create an overdue report.
Menas: If result of calculated days = 1 -> One column should be named as "Overdue 1".
How to?
Hi,
We can't give any discriptions in reports, but we can give some flags i.e. 1, 2, or 3 like that.
I have date A and date B.
In routine I calculated number of days (A-B).
You can do it at Transformation level, but it is not advisable and better calculate at run time in reporting level using Formula Variables with Replacement path.
Create Two Formula variables with replacement path for A and B and replace with Key and in Dimension select Date and then drag and drop that TWO Variables in two formulas in Columns and in another column do simple subtraction and see the result.
Calculating the Ageing of the Materials
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/a-c/calculating%20the%20ageing%20of%20the%20materials.pdf
Thanks
Reddy
Similar Messages
-
Hi,
I have to prepare AR Overdue Report, for the Balance
I have Filtered 0FI_DOCSTAT to "O" Used KYFNM1 = 0DEB_CRE_LC.
Next I want to do - Posting Date <= Key Date.
How can I achieve this? Means I need to get all these things together? in query??
Thanks in advance,
Shreesh.Hi,
Try to create a variable on posting date and may be issue solve .
You want to analaysis on customers cretae a formual dr-cr
Regards
Sivaraju -
In alv report , how to reserve 20 lines from beginning of page
hi experts
in alv report , how to reserve 20 lines from beginning of page.
regards
subhasis.If by reserve you mean should not move on scrolling then make them KEY from fieldcatalog.
But I think maximum of 10-12 can be handled by that.
Regards,
Amit
Reward all helpful replies. -
Check boxes in ALV Report how to do ?
ALV report how to keep check box in the first field?
thanks in advance..
chalapathihi,
Check this small code.. U will get clear idea.
Report.
data : begin of it occurs 0,
MATNR TYPE MATNR,
c1 , " CHECK BOX FIELDS
c2,
end of it.
type-pools : slis.
data itlog type slis_t_fieldcat_alv.
data walog type slis_fieldcat_alv.
SELECT MATNR
FROM MARA
INTO TABLE IT .
****INSERTING CHECKBOX IN CHANGE MODE
WALOG-FIELDNAME = 'C1'.
WALOG-TABNAME = 'IT'.
WALOG-SELTEXT_M = 'CHECKBOX1'.
walog-CHECKBOX = 'X'.
WALOG-EDIT = 'X'.
APPEND WALOG TO ITLOG.
****INSERTING CHECKBOX IN DISPLAY MODE
WALOG-FIELDNAME = 'C2'.
WALOG-TABNAME = 'IT'.
WALOG-SELTEXT_M = 'CHECKBOX2'.
walog-CHECKBOX = 'X'.
WALOG-EDIT = ''.
APPEND WALOG TO ITLOG.
WALOG-FIELDNAME = 'MATNR'.
WALOG-TABNAME = 'IT'.
WALOG-SELTEXT_M = 'MATERIAL'.
walog-CHECKBOX = ''.
WALOG-EDIT = 'X'.
WALOG-NO_ZERO = 'X'. " LEFT ZEROS WILL CUT
APPEND WALOG TO ITLOG.
*WALOG-FIELDNAME = 'ICON'.
*WALOG-TABNAME = 'IT'.
*WALOG-SELTEXT_M = 'ICON'. "IN FIELDCATALOG ADDING THAT ICON
*walog-ICON = 'X'.
*walog-just = 'R'. " RIGHT JUSTIFICATION OR LEFT
**WALOG-EDIT = ''.
*APPEND WALOG TO ITLOG.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = 'ZALV_SIMPLE1'
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT = ITLOG
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Thanks and Regards,
surya -
Hyperlink on Crystal Report: how to popup a window without menubar?
Hyperlink on Crystal Report: how to popup a window without menubar?
Hello Experts!
I'm using VS2003 with Crystal Reports for VS2003.
I need to show a popup window clicking a hyperlink text object on my crystal report.
On the CrystalReportViewer I have set up HyperlinkTarget=_blank, and it's working fine.
But when I click on the hyperlink and shows the popup window, how can I show the popup window without menubar, toolbar, directories, etc.
Something like:
window.open('../MyPage.html?id=id001" + Cad + "',null,'menubar=no,scrollbars=yes,toolbar=no,location=no,directories=no,resizable=yes,status=yes')Adam is correct. The closest you can get is setting the CrystalReportViewers HyperlinkTarget to _blank. It was seen as a potential security vulnerability to allow you to run scripts from a Crystal Reports. In our Enterprise product you can use a reg key called EncodeHTMLForSingleLineFieldObjects to control whether this can be turned on or off.
Unfortunately this was never ported over to our .NET CrystalReportViewer.
This is referenced in notes 1202803, 1219298, and 1219301.
https://www.sdn.sap.com/irj/sdn/businessobjects-notes
Edited by: David Hilton on Jul 16, 2008 4:17 PM -
My ipod touch was stolen and I need the serial number for the police report how can i recover it
my ipod touch was stolen and i need the serial number for the police report how can i get that
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
-
In ALV reports how can we capture separate data in 3 internal table
HI
In ALV reports how can we capture data in 3 Internal tables and combine them in another internal table to display........Hello Sudhanshu
Another option would be to display all three itabs together which is a piece of cake using OO-based ALV lists. Please refer to thread
Re: Alv
for a sample report.
Regards
Uwe -
In abap report how to get substitute Materials
Hi Friends,
In abap report how to get substitute Materials. Is there any function module or bapi available other than Function 'PRODUCT_SUBSTITUTION'
Will appreciate your suggessions with poits.Hi anilkumar,
1. u have the position
u want the Job
2. In hrp1001 table
OTYPE = 'S' (for position)
OBJID = POSITION (AS ABOVE)
SCLAS = 'C' (for finding job)
<b> SOBID = XXXXXX (here u will get the JOB)</b>
regards,
amit m. -
In reports how to upload a logo?
Hi
In reports how to upload a logo?
Thankscheck program
RSDEMO_CUSTOM_CONTROL.
Its how to call LOGO not Upload.
Regards
Prabhu -
When displaying multiple curves on one 2d graph in reports how do I force one curve to be in the foreground? I have two signals and I want to show one overlayed on top of the other. Right now Diadem will only graph it the other way around. I have tried deleting the curves and re-adding them in differnt orders, changin the order they are in the curve list, changing their order inthe data portal, right clicking on the curve and selecting "move to forground" (this only moves the entire 2-d graph object to the foreground). Im using Diadem 12.0 Basic.
Solved!
Go to Solution.Hello Joe,
I figured out what causes your curves to draw in the wrong "order".
You are using two Y-axes, and DIAdem always draws the data for Y1 before Y2, no matter what the order of the curves is in the "Curve and Axis Definition" dialog.
I am attaching your layout with a small modification, I changed the Y1 and Y2 axis order (I swapped which Y-axis the data is displayed on), and I get the following result:
Once I looked at your layout it became clear why the order of the curves didn't reflect the order in which the curves were drawn. I didn't know this - so I just learned something new here as well.
I hope this answers your question, feel free to ask if there is anything else I can help you with.
Otmar
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."
Attachments:
Modified Report Layout.TDR 146 KB -
Can you please help me, Im trying to locate an accounts overdue report on for Accounts Receivable that lists Unpaid Cash accounts, and overdue 7 & 14 day accounts. For 30 day and longer term accounts we use the Age Analysis Report but this doesnt help us for terms shorter than 30 days.
Hope you can help .
Regards
PradeepHi.
One option for the AR dates is to change the interval of the reporting buckets on the selection screen of the AR aging report. Setting it down to a 7 day interval, rather than the 30 day default, creates a report that will break out the shorter dates. Perhaps you could create a customer property for the "under 30 day terms", and just run the AR aging report against that property.
I'm not sure what you mean by unpaid cash accounts, but we developed a query to report just unapplied customer cash. Using Query generator, it looks like:
SELECT T0.[DocNum], T0.[DocDate], T0.[DocDueDate],
T0.[NoDocSum] FROM ORCT T0
WHERE T0.[NoDocSum] >0 AND T0.[DocType] = 'C' AND T0.[Canceled] = 'N'
Catches overpayments, too. Hope this helps. -
In ALV reports how double click event works?
in ALV reports how double click event works? Explain in detail.....
hi,
last lines is used for clicking
*& Report Z_SWAS_FUNCTIONAL
report z_swas_functional.
tables: qmel,viqmel,iloa,afko.
-- global data declerations--
data: ok_code like sy-ucomm,
gt_itab type table of zfunctional,
t_output type table of zfunctional,
g_container type scrfname value 'CUSTOM_CONTROL',
grid1 type ref to cl_gui_alv_grid,
g_custom_container type ref to cl_gui_custom_container,
e_row type lvc_s_row,
e_column type lvc_s_col,
es_row_no type lvc_s_roid.
*CLASS DECLARATION
class z_functional definition.
public section.
class-methods : handle_double_click
for event double_click of cl_gui_alv_grid
importing e_row e_column.
endclass.
*CLASS IMPLEMENTATION
class z_functional implementation.
method handle_double_click.
perform handle_double_click using e_row e_column es_row_no.
endmethod.
endclass.
*CODE FOR SELECTION SCREEN
selection-screen begin of block 84433 with frame title text-t01.
parameters : n_number like viqmel-qmnum,
n_type like qmel-qmart,
f_loca like iloa-tplnr,
name like qmel-qmnam.
selection-screen end of block 84433.
screen validation event *
at selection-screen on n_number.
select single *
from viqmel
where qmnum eq n_number.
if sy-subrc ne 0.
MESSAGE 'NOTIFICATION NUMBER DOESNOT EXIST' TYPE 'E'.
endif.
select qmart from qmel into qmel where qmart eq N_TYPE.
endselect.
if sy-subrc ne 0.
MESSAGE 'NOTIFICATION TYPE DOES NOT EXIST' TYPE 'E'.
endif.
*START OF SELECTION EVENT
start-of-selection.
perform fetchdata.
end-of-selection.
*Call screen event
call screen 100.
*PERFORM DISPLAY.
*& Form FETCHDATA
text
--> p1 text
<-- p2 text
form fetchdata .
*SELECT VIQMEL~QMNUM VIQMEL~QMTXT VIQMEL~QMDAT VIQMEL~LTRMN VIQMEL~PRIOK
VIQMELBEZDT VIQMELAUFNR VIQMELTPLNR AFKOGLTRP into corresponding fields of table GT_ITAB
FROM VIQMEL INNER JOIN AFKO ON VIQMELAUFNR = AFKOAUFNR
WHERE VIQMELQMNUM IN N_NUMBER and VIQMELQMART IN N_TYPE AND VIQMEL~QMNAM IN NAME.
call function 'ZSWAS_TEST'
exporting
qmnum = n_number
qmart = n_type
tplnr = f_loca
qmnam = name
tables
output = gt_itab
if sy-subrc ne 0.
message e000(z84433_msg_class).
endif.
endform. " FETCHDATA
*& Module STATUS_0100 OUTPUT
text
module status_0100 output.
set pf-status 'MAIN'.
SET TITLEBAR 'xxx'.
*creating custom container and grid instance
if g_custom_container is initial.
create object g_custom_container
exporting container_name = g_container.
create object grid1
exporting i_parent = g_custom_container.
call method grid1->set_table_for_first_display
exporting
i_structure_name = 'ZFUNCTIONAL'
changing
it_outtab = gt_itab.
*set handler events
set handler z_functional=>handle_double_click for grid1.
endif.
endmodule. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
module user_command_0100 input.
case ok_code.
when 'EXIT'.
perform exit_program.
endcase.
clear ok_code.
endmodule. " USER_COMMAND_0100 INPUT
*& Form EXIT_PROGRAM
text
--> p1 text
<-- p2 text
form exit_program .
leave program.
endform. " EXIT_PROGRAM
*& Form handle_double_click
text
-->P_E_ROW text
-->P_E_COLUMN text
-->P_ES_ROW_NO text
form handle_double_click using e_row type lvc_s_row
e_column type lvc_s_col
es_row_no type lvc_s_roid.
data: t_output type zfunctional.
read table gt_itab into t_output index e_row-index .
if sy-subrc = 0 and e_column-fieldname eq 'QMNUM'.
set parameter id 'K01' field t_output-qmnum.
call transaction 'ZSMART' and skip first screen .
endif.
endform. " handle_double_click
regards,
swaroop. -
IF i want multiple currency conversion inthe report how to do
IF i want multiple currency conversion in the report how to do
HI
Basically currency translation is going to be happen based on OB08 Table. this table is exists in ERP and BI as well through some internal program the BI OB08 table will be updated based on ERP.
if you want to maintain the currency translation if it is 3.X Tcode os RRC1 is it is BI7 RCUR.
there you can maintain how many conversions you want according to your requirement
Regards,
Chandra. -
I use global structure in another report how can i make it local ?
i use global structure in another report how can i make it local ?
Naresh,
Right click on structure and choose remove reference. Then you can add new fields, and this structure is local.
Hope it Helps
Srini -
PPR Report ,How to display Label with TOTAl
Hi,
How Can i display PPR Report ,How to display Label with TOTAl like
[http://apex.oracle.com/pls/apex/f?p=267:30:]
Thanks
Edited by: 805629 on Jan 6, 2011 3:34 AMHi,
For PPR Report:
Select "Yes" in "Enable Partial Page Refresh" item of "Layout and Pagination" region in Report Attributes of that report.
For display Label with TOTAL:
Use "Break Formatting" region in Report Attributes of that report.
Regards,
Kartik Patel
http://patelkartik.blogspot.com/
http://apex.oracle.com/pls/apex/f?p=9904351712:1
Maybe you are looking for
-
EMOD Emails going into Junk Folder
I created an email campaign in EMOD, targetting 330 customers. Just to be on the safe side, I also added myself as a recipient on the list. The emails went out successfully as scheduled, but I noticed that instead of the inbox my email has gone direc
-
Can share someone else iTunes library through home sharing?
Can share library's between two different computers on separate wi-if?
-
Syntax Error while running step 34 (35) after unicode conversion
Hello, We are converting our test system to Unicode to find out how to do it in our production system. We are at step 34/35 (Starting RFC job's) in the database installation so we are almost done but we have encounted a problem that we can't find a s
-
Insufficient privileges to modify Acknowledgements.rtf
I am trying to install the new version of itunes 8.2. It downloaded fine and I thought it installed because it asked me to restart my computer. However when I click to open itunes I get an error message that says: "*+_The installer has insufficient p
-
going crazy with the ringtone editor for iphone, just doesnt come up and keep sending me back to the itune store... any recommendations???