Overflow question

Hi
Below is AS54xm configuration
If the gateway 172.16.16.120 is down (dial-peer 4403), the call (destination-pattern 441) will overflow to dial-peer 4402 (4401) or dial-peer 4406 (4409).
If I want to force the calls (destination-pattern 441) to dial-peer 4406 and 4409, how to change the configuration?
Rdgs
R1
dial-peer voice 4401 voip
no prefer
destination-pattern 44.
session target ipv4:192.168.16.120
dial-peer voice 4402 voip
no prefer
destination-pattern 44.
session target ipv4:192.168.17.120
dial-peer voice 4403 voip
no prefer
destination-pattern 441.
session target ipv4:172.16.16.120
dial-peer voice 4404 voip
prefer 1
destination-pattern 44.
session target ipv4:202.x.x.x
dial-peer voice 4405 voip
prefer 1
destination-pattern 44.
session target ipv4:210.x.x.x
dial-peer voice 4406 voip
prefer 1
destination-pattern 441.
session target ipv4:218.x.x.x
dial-peer voice 4407 voip
prefer 2
destination-pattern 44.
session target ipv4:168.x.x.x
dial-peer voice 4408 voip
prefer 2
destination-pattern 44.
session target ipv4:167.x.x.x
dial-peer voice 4409 voip
prefer 2
destination-pattern 441.
session target ipv4:168.x.x.x

first dial peers make matching first on the longest matched digites if all the same it goo to the prefrence and then to the dialpeer number
so if u want to match 441 only without dot
do the following
dial-peer voice 6 voip
destination-pattern 441
session target ipv4:218.x.x.x
dial-peer voice 9 voip
prefrence 1
hunt stop
destination-pattern 441
session target ipv4:168.x.x.x
hunt stop will stop looking for identical dial-peers with higer prefrence
so will go to dial-peer 6 then 9 then stop
good luck
please if helpful rate

Similar Messages

  • Xcode4.0.2 How can i build an application on an a intel machine for both an i386 and a ppc machine

    I can't find the way to change the build settings for both architectures in xcode 4.0.2

    Xcode 4 does not build for PowerPC officially. The following Stack Overflow question provides a hack to build for PowerPC:
    http://stackoverflow.com/questions/5333490/how-can-we-restore-ppc-ppc64-as-well- as-full-10-4-10-5-sdk-support-to-xcode-4

  • "With Xib for user interface" option Disabled

    I was able to use the "With Xib for user interface" a couple of days ago but now when I try to create new object-c file with xib interface, I cant use the checkbox. It is disabled. What may be the problem? How can I create a file with xib again?

    Does the following Stack Overflow question help you?
    How to create new View Controllers in XCode 4.3
    If not, you're going to have provide more information for anyone to help you. What version of Xcode are you using? What type of Objective-C file are you creating? What type of project are you adding the file to?

  • How to prevent the backspace conditionally. if no focus in any control in the document ?

    I prevent a backspace button conditionally using confirm box. i used event.preventdefault() method to stop the event of i press ok in the conform box.
    But it works when the focus is on either input or text area elements.
    if there is no focus in these controls the browser redirects to previous page.
    i need your help..
    thanks in advance !

    Hi dineshkumar,
    Thank you for your question. I understand that there are some default hot keys that are not being prevented in a web page unless they are focused in an input html tag. I do not know if this is for a website you developed or if this is for all websites, but:
    If it is for all websites: you can use a key configuration to change it only in Firefox [http://kb.mozillazine.org/Keyconfig_extension]
    If it is in a website:
    *Please see the MDN article for more information on the Javascript call you are using: [https://developer.mozilla.org/en-US/docs/Web/API/event.preventDefault]
    *Here is a relevant stack overflow question: [http://stackoverflow.com/questions/1357118/event-preventdefault-vs-return-false]
    Thank you and we hope this helps.

  • Office 365 API, error: The token has invalid value 'roles' for the claim type ''

    Hi guys,
    I am trying to develop a Daemon / Server application using the new Office 365 APIs. I have added a new application to Azure Active Directory. I am using cURL + the app ID and secret to get a JWT token, this is the exact request:
    curl -X POST https://login.windows.net/TENANT_KEY/oauth2/token \
    -F redirect_uri=http://spreadyDaemon \
    -F grant_type=client_credentials \
    -F resource=https://outlook.office365.com/ \
    -F client_id=XXXX \
    -F client_secret=XXXX=
     I get back a JWT however it has no scopes for access set here is the decoded JWT claims:
    "ver": "1.0",
    "aud": "https://outlook.office365.com/",
    "iss": "https://sts.windows.net/TENANT_KEY/",
    "oid": "17fa33ae-a0e9-4292-96ea-24ce8f11df21",
    "idp": "https://sts.windows.net/TENANT_KEY/",
    "appidacr": "1",
    "exp": 1415986833,
    "appid": "XXXX",
    "tid": "e625eb3f-ef77-4c02-8010-c591d78b6c5f",
    "iat": 1415982933,
    "nbf": 1415982933,
    "sub": "17fa33ae-a0e9-4292-96ea-24ce8f11df21"
    Therefore when I do a request to the exchange API endpoint I get the following response:
    HTTP/1.1 401 Unauthorized
    Cache-Control: private
    Server: Microsoft-IIS/8.0
    request-id: d08d01a8-7213-4a13-a598-08362b4dfa70
    Set-Cookie: ClientId=WDALDNO0CAIOOZDZWTA; expires=Sat, 14-Nov-2015 16:40:59 GMT; path=/; HttpOnly
    X-CalculatedBETarget: am3pr01mb0662.eurprd01.prod.exchangelabs.com
    x-ms-diagnostics: 2000001;reason="The token has invalid value 'roles' for the claim type ''.";error_category="invalid_token"
    X-DiagInfo: AM3PR01MB0662
    X-BEServer: AM3PR01MB0662
    X-AspNet-Version: 4.0.30319
    Set-Cookie: exchangecookie=6bf68da033684824af21af3b0cdea6e3; expires=Sat, 14-Nov-2015 16:40:59 GMT; path=/; HttpOnly
    Set-Cookie: [email protected]=[email protected]4Wbno2ajNGQkZKWnI2QjJCZi9GckJKBzc/Oy9LOzdLOy6vOycXLz8XKxoGaio2PjZvPztGPjZCb0ZqHnJeekZiak56djNGckJI=; expires=Sun, 14-Dec-2014 16:40:59 GMT; path=/EWS; secure; HttpOnly
    Set-Cookie: [email protected]=[email protected]4Wbno2ajNGQkZKWnI2QjJCZi9GckJKBzc/Oy9LOzdLOy6vOycXLz8XKxg==; expires=Sun, 14-Dec-2014 16:40:59 GMT; path=/EWS; secure; HttpOnly
    X-Powered-By: ASP.NET
    X-FEServer: DB4PR02CA0026
    WWW-Authenticate: Bearer client_id="00000002-0000-0ff1-ce00-000000000000", trusted_issuers="00000001-0000-0000-c000-000000000000@*", authorization_uri="https://login.windows.net/common/oauth2/authorize", error="invalid_token",Basic Realm="",Basic Realm=""
    Date: Fri, 14 Nov 2014 16:40:59 GMT
    Content-Length: 0
    I have asked a stack overflow question here: http://stackoverflow.com/questions/26950838/office-365-api-error-the-token-has-invalid-value-roles-for-the-claim-type
    Any help on the matter will be hugely appreciated, thanks!

    Hi Manu,
    To wrap this thread up; I have had an answer on stack overflow.
    It appears that currently the grant type client_credentials is not supported, according to a comment on this blog post by Matthias' http://blogs.msdn.com/b/exchangedev/archive/2014/03/25/using-oauth2-to-access-calendar-contact-and-mail-api-in-exchange-online-in-office-365.aspx 
    "There is no way in the code flow to avoid username/password. We're working on a client credential flow for later this fall that will give you the functionality required to run background services. For this you will not need a username/password,
    but the application will directly assert its identity and authenticate as itself."
    Unfortunately I require client_credentials for a daemon process, Q4 is the scheduled release for support for this grant time.
    Thanks for the help,
    Nick

  • How can I add background color to NSView?

    In NSView how can I add a background color?

    A Google search for nsview background color turned up many results, including the following Stack Overflow questions:
    Setting the background color of an NSView
    Best way to change the background color for an NSView

  • Questions on in-memory with disk based overflow cache.

    Hi, support
    I want to create a cache which have two tiers, one is size limited local cache and the other uses a disk as a storage. As you said if the local cache is full, the other data will be moved to external cache (on disk). Does it mean the other data will be saved in a temp file? If so, could you let me know where is temp file? The config file is attached.
    Btw, although I used on disk cache as a external cache, I got Exception in thread "main" java.lang.OutOfMemoryError: Java heap space also when I put lots of data into the cache.
    Thanks a lot.
    <?xml version="1.0"?>
    <!DOCTYPE cache-config SYSTEM "cache-config.dtd">
    <cache-config>
         <caching-scheme-mapping>
                        <!-- this local cache is used for buffer in rdsprocessor -->
              <cache-mapping>
                   <cache-name>bufferStorage</cache-name>
                   <scheme-name>SampleOverflowScheme</scheme-name>
              </cache-mapping>
         </caching-scheme-mapping>
         <caching-schemes>
              <overflow-scheme>
                   <scheme-name>           
                        SampleOverflowScheme
                   </scheme-name>
                   <front-scheme>
                        <local-scheme>
                             <high-units>100</high-units>
                        </local-scheme>
                   </front-scheme>
                   <back-scheme>
                        <external-scheme>
                             <lh-file-manager/>
                             <!--
                             <high-units>10</high-units>
                             -->
                        </external-scheme>
                   </back-scheme>
              </overflow-scheme>           
         </caching-schemes>
    </cache-config>
    Message was edited by:
    user620684

    Hi, Jon
    Thanks for your help.
    I will use an unconfigured LH file manager(I mean the file path and name will not be specified.).
    Currently, find the temp file will be created in C:\Documents and Settings\$user_name\Local Settings\Temp in windows.
    I have two questions on temp file.
    1) Does tangosol supply a mechanism to maintain the temp files?
    2) In solaris, which place will the temp file be created in?
    Thanks,
    Bin
    null

  • Stack overflow resolution and question

    on Oct 8th, I posted the stack overflow at the end of this message. I
    figured out the problem, but would like some insight into why it manifested
    itself as a stack overflow. Why isn't it a heap overflow? I care which
    overflows because a problem could still exist.
    PROBLEM
    Our server transmits an event object to our client. The event object has
    references to 2 member objects which describe the context of the event.
    About 200 of each type of member object is created. They are kept in a
    HashMap so we can reuse them.
    However, in one case, a new member object is created every time an event is
    transmitted. That's the bug - about a thousand events a second are created
    so one thousand of each member object is created, then transmitted. When we
    changed the member object creation to a member HashMap lookup, the stack
    trace stopped.
    PROFILING
    To isolate the problem, we profiled the client with OptimizeIt. This
    showed about 150,000 member objects and about 148,000
    java.io.ObjectInputStream$HandleTable$HandleList instances. In some runs,
    Garbage collection reduced the number to about 60,000. In other runs,
    Garbage Collection did not run before the stack error occurred.
    If we create lots of member objects in the heap, then the heap should
    overflow. Why does the stack overflow?
    ERROR MESSAGE
    The declaration is
    Socket sock = new Socket( hostname, port );
    ObjectInputStream is = new ObjectInputStream( sock.getInputStream() );
    ObjectOutputStream os = new ObjectOutputStream( sock.getOutputStream() );
    java.lang.StackOverflowError
    at COM.jrockit.io.NativeIOInputStream.read([BII)I(Optimized Method)
    at java.io.ObjectInputStream$PeekInputStream.read([BII)I(Optimized Metho
    d)
    at java.io.ObjectInputStream$BlockDataInputStream.read([BIIZ)I(Unknown S
    ource)
    at java.io.ObjectInputStream$BlockDataInputStream.readFully([BIIZ)V(Unkn
    own Source)
    at java.io.ObjectInputStream.defaultReadFields(Ljava.lang.Object;Ljava.i
    o.ObjectStreamClass;)V(Optimized Method)
    at java.io.ObjectInputStream.readSerialData(Ljava.lang.Object;Ljava.io.O
    bjectStreamClass;)V(Unknown Source)
    at java.io.ObjectInputStream.readOrdinaryObject(Z)Ljava.lang.Object;(Opt
    imized Method)
    at java.io.ObjectInputStream.defaultReadFields(Ljava.lang.Object;Ljava.i
    o.ObjectStreamClass;)V(Optimized Method)
    at java.io.ObjectInputStream.readSerialData(Ljava.lang.Object;Ljava.io.O
    bjectStreamClass;)V(Unknown Source)
    at java.io.ObjectInputStream.readOrdinaryObject(Z)Ljava.lang.Object;(Opt
    imized Method)
    at java.io.ObjectInputStream.defaultReadFields(Ljava.lang.Object;Ljava.i
    o.ObjectStreamClass;)V(Optimized Method)
    at java.io.ObjectInputStream.readSerialData(Ljava.lang.Object;Ljava.io.O
    bjectStreamClass;)V(Unknown Source)
    at java.io.ObjectInputStream.readOrdinaryObject(Z)Ljava.lang.Object;(Opt
    imized Method)
    at java.io.ObjectInputStream.defaultReadFields(Ljava.lang.Object;Ljava.i
    o.ObjectStreamClass;)V(Optimized Method)
    at java.io.ObjectInputStream.readSerialData(Ljava.lang.Object;Ljava.io.O
    bjectStreamClass;)V(Unknown Source)
    at java.io.ObjectInputStream.readOrdinaryObject(Z)Ljava.lang.Object;(Opt
    imized Method)
    at java.io.ObjectInputStream.defaultReadFields(Ljava.lang.Object;Ljava.i
    o.ObjectStreamClass;)V(Optimized Method)
    at java.io.ObjectInputStream.readSerialData(Ljava.lang.Object;Ljava.io.O
    bjectStreamClass;)V(Unknown Source)
    at java.io.ObjectInputStream.readOrdinaryObject(Z)Ljava.lang.Object;(Opt
    imized Method)
    at java.io.ObjectInputStream.defaultReadFields(Ljava.lang.Object;Ljava.i
    o.ObjectStreamClass;)V(Optimized Method)
    at java.io.ObjectInputStream.readSerialData(Ljava.lang.Object;Ljava.io.O
    bjectStreamClass;)V(Unknown Source)
    at java.io.ObjectInputStream.readOrdinaryObject(Z)Ljava.lang.Object;(Opt
    imized Method)
    at java.io.ObjectInputStream.defaultReadFields(Ljava.lang.Object;Ljava.i
    o.ObjectStreamClass;)V(Optimized Method)
    at java.io.ObjectInputStream.readSerialData(Ljava.lang.Object;Ljava.io.O
    bjectStreamClass;)V(Unknown Source)
    at java.io.ObjectInputStream.readOrdinaryObject(Z)Ljava.lang.Object;(Opt
    imized Method)
    at java.io.ObjectInputStream.defaultReadFields(Ljava.lang.Object;Ljava.i
    o.ObjectStreamClass;)V(Optimized Method)
    at java.io.ObjectInputStream.readSerialData(Ljava.lang.Object;Ljava.io.O
    bjectStreamClass;)V(Unknown Source)
    at java.io.ObjectInputStream.readOrdinaryObject(Z)Ljava.lang.Object;(Opt
    imized Method)
    at java.io.ObjectInputStream.defaultReadFields(Ljava.lang.Object;Ljava.i
    o.ObjectStreamClass;)V(Optimized Method)
    at java.io.ObjectInputStream.readSerialData(Ljava.lang.Object;Ljava.io.O
    bjectStreamClass;)V(Unknown Source)
    at java.io.ObjectInputStream.readOrdinaryObject(Z)Ljava.lang.Object;(Opt
    imized Method)
    at java.io.ObjectInputStream.defaultReadFields(Ljava.lang.Object;Ljava.i
    o.ObjectStreamClass;)V(Optimized Method)
    Jeff
    Jeff
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    Well, the HandleList entries mark a dependency from a parent object to a
    child (i.e referer and referee), and my guess is that you at some point
    simply manage to serialize a very long object chain:
    Obj1 -[ ref to]-> Obj2 -[ref to]-> Obj3 and so on.
    This will cause a recursive deserialization (actually, it causes a
    recursive serialization also, so sender should SOE as well). The amount
    of memeory used is probably high, but not OOM high. Note, that for this
    to happen, all objects sent must be unique, which you state that they
    are. Question is how you've managed to create an object chain like this.
    Another explanation might be that there is actually a bug somewhere in
    the sender that causes a circular reference between two (or more)
    objects to be sent not as reference handles, but unique objects. I
    cannot see what would cause this though. I assume that you don't have
    concurrency issues (i.e only one thread uses the ObjectOutput/Input
    streams at one time)?
    Do you have an exact count of the transmitted object? It might help me
    figure out exactly what happend.
    /C
    Jeff wrote:
    on Oct 8th, I posted the stack overflow at the end of this message. I
    figured out the problem, but would like some insight into why it manifested
    itself as a stack overflow. Why isn't it a heap overflow? I care which
    overflows because a problem could still exist.
    PROBLEM
    Our server transmits an event object to our client. The event object has
    references to 2 member objects which describe the context of the event.
    About 200 of each type of member object is created. They are kept in a
    HashMap so we can reuse them.
    However, in one case, a new member object is created every time an event is
    transmitted. That's the bug - about a thousand events a second are created
    so one thousand of each member object is created, then transmitted. When we
    changed the member object creation to a member HashMap lookup, the stack
    trace stopped.
    PROFILING
    To isolate the problem, we profiled the client with OptimizeIt. This
    showed about 150,000 member objects and about 148,000
    java.io.ObjectInputStream$HandleTable$HandleList instances. In some runs,
    Garbage collection reduced the number to about 60,000. In other runs,
    Garbage Collection did not run before the stack error occurred.
    If we create lots of member objects in the heap, then the heap should
    overflow. Why does the stack overflow?
    ERROR MESSAGE
    The declaration is
    Socket sock = new Socket( hostname, port );
    ObjectInputStream is = new ObjectInputStream( sock.getInputStream() );
    ObjectOutputStream os = new ObjectOutputStream( sock.getOutputStream() );
    java.lang.StackOverflowError
    at COM.jrockit.io.NativeIOInputStream.read([BII)I(Optimized Method)
    at java.io.ObjectInputStream$PeekInputStream.read([BII)I(Optimized Metho
    d)
    at java.io.ObjectInputStream$BlockDataInputStream.read([BIIZ)I(Unknown S
    ource)
    at java.io.ObjectInputStream$BlockDataInputStream.readFully([BIIZ)V(Unkn
    own Source)
    at java.io.ObjectInputStream.defaultReadFields(Ljava.lang.Object;Ljava.i
    o.ObjectStreamClass;)V(Optimized Method)
    at java.io.ObjectInputStream.readSerialData(Ljava.lang.Object;Ljava.io.O
    bjectStreamClass;)V(Unknown Source)
    at java.io.ObjectInputStream.readOrdinaryObject(Z)Ljava.lang.Object;(Opt
    imized Method)
    at java.io.ObjectInputStream.defaultReadFields(Ljava.lang.Object;Ljava.i
    o.ObjectStreamClass;)V(Optimized Method)
    at java.io.ObjectInputStream.readSerialData(Ljava.lang.Object;Ljava.io.O
    bjectStreamClass;)V(Unknown Source)
    at java.io.ObjectInputStream.readOrdinaryObject(Z)Ljava.lang.Object;(Opt
    imized Method)
    at java.io.ObjectInputStream.defaultReadFields(Ljava.lang.Object;Ljava.i
    o.ObjectStreamClass;)V(Optimized Method)
    at java.io.ObjectInputStream.readSerialData(Ljava.lang.Object;Ljava.io.O
    bjectStreamClass;)V(Unknown Source)
    at java.io.ObjectInputStream.readOrdinaryObject(Z)Ljava.lang.Object;(Opt
    imized Method)
    at java.io.ObjectInputStream.defaultReadFields(Ljava.lang.Object;Ljava.i
    o.ObjectStreamClass;)V(Optimized Method)
    at java.io.ObjectInputStream.readSerialData(Ljava.lang.Object;Ljava.io.O
    bjectStreamClass;)V(Unknown Source)
    at java.io.ObjectInputStream.readOrdinaryObject(Z)Ljava.lang.Object;(Opt
    imized Method)
    at java.io.ObjectInputStream.defaultReadFields(Ljava.lang.Object;Ljava.i
    o.ObjectStreamClass;)V(Optimized Method)
    at java.io.ObjectInputStream.readSerialData(Ljava.lang.Object;Ljava.io.O
    bjectStreamClass;)V(Unknown Source)
    at java.io.ObjectInputStream.readOrdinaryObject(Z)Ljava.lang.Object;(Opt
    imized Method)
    at java.io.ObjectInputStream.defaultReadFields(Ljava.lang.Object;Ljava.i
    o.ObjectStreamClass;)V(Optimized Method)
    at java.io.ObjectInputStream.readSerialData(Ljava.lang.Object;Ljava.io.O
    bjectStreamClass;)V(Unknown Source)
    at java.io.ObjectInputStream.readOrdinaryObject(Z)Ljava.lang.Object;(Opt
    imized Method)
    at java.io.ObjectInputStream.defaultReadFields(Ljava.lang.Object;Ljava.i
    o.ObjectStreamClass;)V(Optimized Method)
    at java.io.ObjectInputStream.readSerialData(Ljava.lang.Object;Ljava.io.O
    bjectStreamClass;)V(Unknown Source)
    at java.io.ObjectInputStream.readOrdinaryObject(Z)Ljava.lang.Object;(Opt
    imized Method)
    at java.io.ObjectInputStream.defaultReadFields(Ljava.lang.Object;Ljava.i
    o.ObjectStreamClass;)V(Optimized Method)
    at java.io.ObjectInputStream.readSerialData(Ljava.lang.Object;Ljava.io.O
    bjectStreamClass;)V(Unknown Source)
    at java.io.ObjectInputStream.readOrdinaryObject(Z)Ljava.lang.Object;(Opt
    imized Method)
    at java.io.ObjectInputStream.defaultReadFields(Ljava.lang.Object;Ljava.i
    o.ObjectStreamClass;)V(Optimized Method)
    at java.io.ObjectInputStream.readSerialData(Ljava.lang.Object;Ljava.io.O
    bjectStreamClass;)V(Unknown Source)
    at java.io.ObjectInputStream.readOrdinaryObject(Z)Ljava.lang.Object;(Opt
    imized Method)
    at java.io.ObjectInputStream.defaultReadFields(Ljava.lang.Object;Ljava.i
    o.ObjectStreamClass;)V(Optimized Method)

  • UCCX 8x. - Agent Personal Queue Question - Dequeue to Overflow verses add secondary resource

    All, 
    I am writing a script for Agent Queue on UCCX 8x, and I want a secondary agent to be able to answer calls for this Queue when the primary Agent is on Break or Logged out .
    I am thinking two options:
    A. Dequeue to Overflow Queue
    B. Adding a secondary agent assign skill  level 10 to the Queue instead.........but the issue here is that this secondary agent belongs to another queue and would need to have a choice whether to answer calls from the other Queue.
    What do you think is the best option?

    What if you set queue priority better so the backup agent always answer this queue first and if it is empty he will answer the second queue till the other agent is available? 

  • Question regarding Overflow

    Hi,
    We use Acord Standard for XML, I am getting multiple party nodes for the beneficiaries which have common tc code. But number of beneficiaries are unknown at run time transaction.
    So we put Overflow Counter at XDD level and used Incovsym rule to implement the section overflow to display the list of beneficiaries in Form which is working pretty well.
    But we have a requirement to get the particular instance of Beneficiary for eg., we need Third, Fourth and Fifth beneficiaries in the list of available beneficiaries. Not sure how can we parse the particular instance?
    Does any body have any idea ?
    Thanks,
    Srini

    In the field properties under the Rule section, the "Record" member can be set to the occurrence that you want. It is important to note that the record number is added to any overflow symbol or instance you have also defined and associated with the field. So, if you are using an overflow symbol and that is set to 4 and the record count of the field property is set to 3, then you will get the 7th item.

  • Usability question: Iframe or DIV overflow-scroll

    Hi,
    I have designed a site: www.banacreative.com that uses a DIV
    with
    overflow scroll for the text content area. From a design
    standpoint I
    don't like endlessly scrolling pages filled with lots of
    boring text, so
    I have chosen to put the long text in a scroll DIV keeping
    the design
    intact. I have gotten some feedback that having two scroll
    bars - one
    for the HTML page, and one for the DIV - is confusing. I'm
    therefore
    looking for comments on this. Is this something to be avoided
    in
    general, or is this an acceptable solution?
    TIA

    BruceCSI2 wrote:
    > I've created pages with both IFrames and scrolling divs.
    The bottom scrollbar
    > of the IFrame doesn't really scroll all that much so
    it's not really an issue,
    > and as on your site the bottom scrollbar of the div is
    actually grayed out so
    > it's not an issue at all. It would be nice to get rid of
    it,
    just use any other browser than IE to get rid of it
    > but it's
    > nonfunctional.
    >
    you're talking some IE-Windows-specific-behavior described as
    if it was something everybody saw...
    In my browser (Safari) I get two scroll bars (page, and
    scrolling area). The scroll bar of the
    scrolling area is in part hidden, as it goes beyond my
    browser window height.
    So I have to scroll the page anyways, to see the whole of the
    inner scrolling area. And that, is
    very annoying.
    seb ( [email protected])
    http://webtrans1.com | high-end web
    design
    An Ingenious WebSite Builder:
    http://sitelander.com

  • Customizing ADF Faces Look & Feel. Some questions & suggestions

    Hi everybody,
    We are developing an application with ADF Faces using JHeadStart. For the moment, I am studying the way we must modify the JHS templates to adapt each element to our needs.
    As it's told in the JHeadStart Developer's Guide, there are two ways to customize Look & Feel:
    1) Modifying the templates
    2) ADF Skinning
    I'm using both methods, but I feel that thay are not good enough to adapt the L&F to our customer requirements.
    My main problem now is in the ADF Table customization. I want to use ADF Table because it offers us a lot of features that are not in the jsf table (the selection column, the table overflow...), and is very usefull combined with the generated JHS code. But at the same time, it doesn't offer a lot of functionality in the look & feel customization. Using JSF Table, I can set the CSS style for headers, rows, columns, the table, I can set the border, cellspacing and cellpadding. But I cannot do
    any of these thing (or at least, I don't see how) with the ADF Table.
    Our customer (a government) have a strict definition of the look & feel of his web applications. They want we use their CSS styles definition file, so they can modify at once the Look & Feel of all their applications. Modifying the L&F through skinning generate other styles, not use the style classes in our CSS (o so I think).
    So, the questions:
    1) There is any way to set the suitable styles for the ADF Table components (headers, rows)?
    1bis) Why, If I have defined a new skin, with only just a few selectors, some styles from oracle are applied? Maybe because the render kit in the 'adf-skins.xml' is "oracle.adf.desktop"? If it is true, how can I make that they are not used, I must implement a render kit or can I use another existent?
    2) Can I decide how looks the select column (for example a button instead of a radio button)? Can I decide where does it goes (right or left)?
    3) There is any way to hidden the text Show/Hide of the showDetail in the table (the tableOverflow), as I can change the icons through skinning? If it is not possible, How can I overwrite the text. I need it in Catalan, but it is shown in English for this locale. Where is the message bundle I should overwrite?
    4) There is any way to force a tree to start fully expanded?
    5) There is anywhere documentation about the javascript functions used in ADF and their meaning? I think for example in the previous question. If I knew which javascript function I should call for expand the tree and its parameters, I could put the call in the onload event of the body.
    6) I use a selectInputDate. I have skinned the launch-icon, and I would like to do a similar thing in the chooseDate that is opened in a new window. But It seems not to be affected for my skinning directives (if I put a chooseDate in the same page, its L&F follow the skinning rules I've defined). I don't know if this dialog is an ADF feature or a JHS generated feature.
    7) There is any way to keep unmodified the id I've choosed for a component? (I mean, an inputText with id="hello" in a form with id="form" will have in the HTML an id = "form:hello", but I would like it to be simply 'hello')
    8) How can I control the position and the size of a dialog (the chooseDate dialog or a dialog I've created)? In the cases I've been testing, it seems the dialog is forced to resize depending on the content. I would like to know if I can establish a fixed size.
    9) There is any way to open a non-modal dialog? (which I could keep open at the same time that another instance of the same dialog)
    For the moment, I think I have no more question. But give me time.... :-D
    The suggestion I've to do is basically more flexible components for a better customization (for example, the styles settings I've talked about previously). ADF components are nice and powerful, but I think they should generate pages that follow the tendencies in the web development: tableless pages (I cannot understand the utility of the objectSpacer existing the margins), use of CSS for layout...
    Any answer, comment or suggestion will be welcome.
    Carles.
    Message was edited by:
    cbios

    I have been able to make the UIX 2.2 and ADF Faces LAF look near identical by updating the oracle-desktop.xss file within UIX 2.2 as follows
    <!-- Change the accent color ramp to tan -->
    <style name="DarkAccentBackground">
    <!--<property name="background-color">#cccc99</property>-->
    <property name="background-color">#d2d8b0</property>
    </style>
    There are still some differences:
    1) A black line appears on the ADF Faces on the 'menu1' facet selected tab below the text. DON'T KNOW HOW TO REMOVE THIS FROM ADF Faces or add it to UIX 2.2!!!
    2) In UIX 2.2 a bulleted list uses the HTML <li> tag. In ADF Faces it doesn't use the HTML <li> tag rather it constructs the bulleted list using lower level HTML tags with the 'bullet' becoming an image, in my browser this means the disc is smaller in Faces. The motivation for this change I think is explained via this post. Since I have no control over how this specific HTML tag is rendered it forces me to replace the /adf/images/bltdscn.gif file in adf-faces-impl.jar with a larger disc!
    http://www.thescripts.com/forum/thread96839.html
    May update this again if there are other things I notice.

  • XMLTRANSFORM Too large stylesheet - code buffer overflow issue

    Hi All,
    My question is related to MSWordML generation from PLSQL stored procedure.
    1. I have table, containing XSLT stylesheets for different documents
    2. PLSQL stored procedure is generating dynamic content depending on some params and at the end I'm using
    SELECT XMLTRANSFORM(XMLTYPE.createxml(db_data_clob), XMLTYPE.createxml(x.xslt_clob)).GetClobVal()
    INTO   res
    FROM   msword_ml_data x
    WHERE  x.report_id = rep_id_variable;
    where : x.xslt_clob -> column, containing XSLT CLOB
    db_data_clob -> dynamic content CLOB
    res -> CLOB result
    All this was working fine on Oracle11gR1, but I had to reinstall database and I said why not install Oracle11gR2 ...
    Guess what. Stored procedure is raising exception when using XMLTRANSFORM :
    Exception : : ORA-31011: XML parsing failed
    ORA-19202: Error occurred in XML processing
    LPX-00004: internal error "Too large stylesheet - code buffer overflow"
    Google says nothing about it. I don't recall setting some special DB property in Oracle11gR1.
    Has anyone encountered this ?
    I haven't changed procedure nor table.
    I'm using exactly the same XSLT's from Java code and they are working just fine, so they are not the reason. My guess is that something in Oracle11gR2 related to XML processing is changed.
    If anyone could help, thanks in advance

    For those who are interested.
    I have logged a service request and it turned out that this is is a bug in Oracle 11gR2.
    "The limitation on the style sheet is not exactly a size limit but a limitation on the number of style sheet instructions and depends on the way the style sheet has been written. This is a C based parser limitation"
    Anyway, the workaround is to create Java stored procedure and do transformation from there.

  • Infinite loop creating new page due to column header overflow.

    i am getting an error and some pages "Infinite loop creating new page due to column header overflow. " --
    using report builder 9, i have a fairly simple report - that contains 4 subreports.
    for some pages i get the error - it seems if there is more data than would fit on 1 page.
    smaller pages work fine.
    the subreports are all simple queries and dumps....
    containing page header, column header, detail sections.
    page header has just a text bar of the name of the section.
    column header has the field names
    detail section has the data - 1 row for each row in the recordset.
    nothing i do seems to change getting "Infinite loop creating new page due to column header overflow. " on a page with more than 15-20 records returned.
    any ideas would be appreciated.

    Try these links if you are still having the issue:
    http://community.jaspersoft.com/questions/543302/receive-infinite-loop-creating-new-page-d ue-column-header-overflow-exception
    http://community.jaspersoft.com/questions/500177/infinite-loop-due-page-header-overflow

  • How do I find out that Overflow is being used

    We have configured Overflow for one of our Caches using bdb.
    I have a few questions with regard to the overflow scheme
    1. How do I test that Overflow is being used indeed ?
    2. Where does bdb store its data, is it on the file system or in memory ? Is there a way to see the data in the bdb scheme ?
    3. Following is the configuration we are using, is that the right way to use overflow ?
    Thanks,
    J
    &lt;distributed-scheme&gt;
    &lt;scheme-name&gt;dist-person&lt;/scheme-name&gt;
    &lt;service-name&gt;dist-person-service&lt;/service-name&gt;
    &lt;thread-count&gt;15&lt;/thread-count&gt;
    &lt;partition-count&gt;6421&lt;/partition-count&gt;
    &lt;serializer&gt;
    &lt;class-name&gt;
    com.tangosol.io.pof.ConfigurablePofContext
    &lt;/class-name&gt;
    &lt;init-params&gt;
    &lt;init-param&gt;
    &lt;param-type&gt;string&lt;/param-type&gt;
    &lt;param-value&gt;custom-types-pof-config.xml&lt;/param-value&gt;
    &lt;/init-param&gt;
    &lt;/init-params&gt;
    &lt;/serializer&gt;
    &lt;backing-map-scheme&gt;
    &lt;read-write-backing-map-scheme&gt;
    &lt;internal-cache-scheme&gt;
    &lt;overflow-scheme&gt;
    &lt;front-scheme&gt;
    &lt;local-scheme&gt;
    &lt;high-units&gt;968000000&lt;/high-units&gt;
    &lt;low-units&gt;726000000&lt;/low-units&gt;
    &lt;unit-calculator&gt;BINARY&lt;/unit-calculator&gt;
    &lt;expiry-delay&gt;5d&lt;/expiry-delay&gt;
    &lt;/local-scheme&gt;
    &lt;/front-scheme&gt;
    &lt;back-scheme&gt;
    &lt;external-scheme&gt;
    &lt;scheme-ref&gt;DiskOverflowScheme&lt;/scheme-ref&gt;
    &lt;/external-scheme&gt;
    &lt;/back-scheme&gt;
    &lt;/overflow-scheme&gt;
    &lt;/internal-cache-scheme&gt;
    &lt;cachestore-scheme&gt;
    &lt;class-scheme&gt;
    &lt;class-name&gt;com.sac.triton.stores.CustomCacheLoader&lt;/class-name&gt;
    &lt;init-params&gt;
    &lt;init-param&gt;
    &lt;param-type&gt;java.lang.String&lt;/param-type&gt;
    &lt;param-value&gt;com.entities.Person&lt;/param-value&gt;
    &lt;/init-param&gt;
    &lt;/init-params&gt;
    &lt;/class-scheme&gt;
    &lt;/cachestore-scheme&gt;
    &lt;read-only&gt;true&lt;/read-only&gt;
    &lt;/read-write-backing-map-scheme&gt;
    &lt;/backing-map-scheme&gt;
    &lt;autostart&gt;true&lt;/autostart&gt;
    &lt;/distributed-scheme&gt;
    &lt;external-scheme&gt;
    &lt;scheme-name&gt;DiskOverflowScheme&lt;/scheme-name&gt;
    &lt;bdb-store-manager&gt;&lt;/bdb-store-manager&gt;
    &lt;/external-scheme&gt;

    Hello,
    BDB will store its data on the file system. You can specify the locatino with the following:
    <bdb-store-manager>
    <directory>{FILE_LOCATION}</directory>
    </bdb-store-manager>
    As far as I am aware you can't see the data in the bdb scheme.
    Regards,
    Nick

Maybe you are looking for

  • ICloud with Outlook 2013 on Windows 8

    Hi Seen various threads on this but nothing definitive. I have Outlook 2013 installed on Windows 8 and have also downloaded the iCloud Control Panel. Calendar & Contacts seems to be ok (all sync up nicely) but with mail I have 2 issues; 1) The iCloud

  • Error while saving SO - item 000010 is missing in table YVBAP

    Hello Experts, We are facing following issue while delivering an order with BOM material. 1)     We created an order with sold-to customer blocked for delivery. 2)     Then we removed the block from customer and also from document header/shipping tab

  • My browser wont open any applet

    Hi, im new at Java, i dont know almost anything about it; but im going to learn.. so i installed j2sdk1.4.0_01 and now i cant view any applet at all i always get this message: Exception:java.lang.NullPointerException. I havent program an applet yet..

  • Why does my system freeze after ever update from Firefox...and has gotten very slow

    My computer freezes during or after every update that come in automatically recently. It has also gotten extremely slow at the same time.

  • Error in Queue Status

    Hi Experts, I am Doing IDoc to File Scenario. If i send an idocs sometimes file is get created in target directory and sometime it is not. i checked in SXMB_MONI, for failed messages in Q.Status column a "stop" symbol with red colour is displaying .