Overlapping symbols - advice from a clever person needed!

Hello clever Edge people!
I have a map I have developed in Edge.
When veiwed (check out the attached jpeg: map1) the user can hover over the roads highlighted to reveal distances and travel times between to points etc. This all works fine.
The user can also use the magnify symbol to enlarge that part of the map. A close up version of the map (a new symbol ) appears on click of the magnify symbol. This too works fine. See the attached jpeg: map 3.
My problem!
I have the close up map as a symbol as the top layer (so it appears above the roads etc). But because it is on top, even when that insert map is not visible (ie. maginify symbol has not been clicked) the FRAME of that map means that the interactive layers beneath (ie. the roads) can not be accessed because the frame is in the way as the top layer. See attached jpeg: map2. You can see the frame of the close up map. In the broswer, I can not access anything under that frame.
I hope I have explained this okay. And I really hope there is someone more clever than me who can help me out!
Thnking you very much in advance!
Lisa in New Zealand

Hi Tim, thanks for getting back to me!
I tried adding an "off" keyframe to the symbol "MAP_ZOOM" and then an "on" keyframe straight after but unfortunately as the timeline plays, the MAP_ZOOM frame appears at the "on" point on the timeline and again everything under that frame is no longer clickable.
Hmmmm...
I guess what I need is "MAP_ZOOM" to be completely "off" UNTIL the magnifying glass is hovered/clicked and then "MAP_ZOOM" is on (but only then!).
I have tried to work this out for a few hours but just can't seem to work out  (steep learning curve for me!). I tried adding a "get symbol" to the magnifying glass "on click"
var mySymbolObject = sym.getSymbol("MAP_ZOOM");
but that didn't work...
I am confused and hoping someone can help me out! Tim, are you out there???
Lisa

Similar Messages

  • Please, I have need Almsaah device iPhone 5 purchased from an Iranian person got the lock code Last updated him but I could not activate it until the program find my phone phone

    Please, I have  need Almsaah device iPhone 5 purchased from an  Iranian person got the lock  code Last  updated him but I could not activate it until the program find my phone

    Please, I have  need help device iPhone 5 purchased from an  Iranian person got the lock  code Last  updated him but I could not activate it until the program When Mai phone

  • Need to copy text messages from a specific person to PC

    I am need to make a copy of text messages from a specific person that I currently have on my phone.  I am wanting to transfer them to my PC and print out copies from there.  How do I do this?  I installed Handsent and tried to retrieve them that way but was unable to.  Also tried SMS backup and restore from the Market.  I am anticipating needing these messages in court. 

    Try an sms backup application that sends to an email address.
    Also the xml file created by sms backup & restore should be readable by excel or Internet Explorer.

  • Ok so I am having issues with charging my iPad as well. So I took advice from this forum and yes, if you turn the brightness down my iPad charges. Thanks Apple I just went and spent money on a new charger I didn't need. Really you need to fix this issue.

    Ok so I am having issues with charging my iPad as well. So I took advice from this forum and yes, if you turn the brightness down my iPad charges. Thanks Apple I just went and spent money on a new charger I didn't need. Really you need to fix this issue.

    Wow. Okay...
    I'll let the real veterans in this forum tackle your issues one after the other. But, I can tell you, all will be well.
    My only comment would be re: your computer specs:
    BJReis wrote:
    .  This may be due to somewhat older equipment:
    GHz Intel Core Duo MacBook Pro with a 4GB memory computer with Ddr3 running OSX 10.8.4
    To be completely honest, FCPX is a RAM hog. It just is. But, RAM is relatively cheap, and the pay-off is good.
    4GB is right on the edge, IMHO. 16G is ideal.
    I wish you luck, hang in there, and standby for more help.

  • Issues with Overlapping Symbols

    Hi,
    I've created an interactive guide on how a piece of scientific apparatus works using Edge Animate, but I've ran into a problem and I'm hoping the community might be able to help me.
    What I've Done So Far
    - Created flyout tooltips that animate as users hover over each component of the instrument. This is achieved by using mouse over (play symbol from label) , mouseout (play reverse)
    - Created descriptions of each component that display in a blue box beside the diagram as the parts are clicked on
    Problem
    The descriptions worked fine, but when I created the fly-out tooltips, I started encountering a problem. As I hover over the diagram, the tooltips are sticking in the mouse over state and not always disappearing on mouseout. If I scan the mouse pointer across the image all tooltips show up and remain on. I'm not sure if the problem is caused by the overlapping symbols.
    Does anyone know what could be causing this problem? I'm fairly new to Edge Animate, so I'm sure it will be something quite obvious to a more experienced user.
    Many thanks,
    Ross
    Message was edited by: Ross_P

    you need to have mouseenter and mouseover with same code, mouseleave and mouseout with the same code to prevent the problem from happening
    regards
    Zaxist

  • Trying to install SL on a new hard-drive for my iMac, when asked which disk to install on it gave me no options, i followed advice from another forum and created a partition, now can't boot from the new drive at all. Help?

    I've had **** with my iMac, the hard-drive failed so i replaced it with a new 1TB Samsung drive. Then when i tried to install SL from the install disk, all went to plan until it asked me which drive i wanted to install it on, where it came up with a box where my options should have been, but instead it didn't give me any options to install it on any drive i.e. it asked which drive i wanted to install it on but no drives came up to select.
    So i followed the advice from another forum, look at the 'Extended Hard-drive preparation' response
    ( https://discussions.apple.com/message/10576009#10576009 )
    After following these instructions i have now got a new partition, but when i restarted my computer to install SL on the drive, the option to boot from the drive is now not available, now i must boot from the install disk, whereas before i was able to boot from either the install disk or the hard drive. The hard drive is still visible in disk utility as it always has been, but i am now unable to boot from it, let alone install SL.
    Please help my iMac has been broken for months and i've been trying to fix it for so long and am getting problem after problem. Thank you!
    <div class="mcePaste" id="_mcePaste" style="position: absolute; left: -10000px; top: 0px; width: 1px; height: 1px; overflow-x: hidden; overflow-y: hidden;" mcestyle="position: absolute; left: -10000px; top: 0px; width: 1px; height: 1px; overflow-x: hidden; overflow-y: hidden;"></div>

    Hi db2
    That off the shelf MS-DOS / FAT-32 drive needs to re-partitioned GUID Partition Table / Mac OS Extended (Journaled) before you can install OS X and Startup your Intel iMac from it.
    1. Boot from your original install or retail SL DVD and open Disk Utility.
    2. Highlight the new HD in the list of drives and select the Partition tab.
    3. Under Volume Scheme select 1 Partition and click on the Options... button.
    4. Select GUID Partition Table in the drop down window and click OK.
    5. Set the Format to Mac OS Extended (Journaled) and click the Apply button.
    6. Once thats done, then you can do a clean SL Install, Restore from TM , your old HD or  Bootable Clone.
    Dennis

  • TS1702 Hi, I'm experiencing a problem with app I've just purchased from iTunes, I have tried every piece of advice from the "iOS: Troubleshooting applications purchased from the App Store" and still nothing is working. I would like to get my refund on thi

    Hi, My name is Bheki Yende
    I'm experiencing a problem with an app I've just purchased from iTunes, I have tried every piece of advice from the "iOS: Troubleshooting applications purchased from the App Store" and still nothing is working. I would like to get my refund on this pls.
    This is an inconvenience, I don't understand why I have to contact the developer for a faulty product in your store.
    I've paid iTunes to get this, so iTunes must fix this problem for me or give my money back.
    Thanks

    This is a user forum, you are not speaking to Apple here.
    You will need to contact iTunes support here, regarding this issue. They will usually respond within 24 hours.

  • Does a person need Adobe Reader in order to use a fillable PDF form?

    I have created a fillable form using Acrobat XI and I find that some persons are unable to use it  while others are.  Does a person need Adobe Reader to use the fillable  form?  If so, how easy is it to download?
    Thank you

    Hi kenmilw,
    Reader is an excellent, and free, option for your recipients who need to fill out your form. It's easily downloaded from www.adobe.com/products/reader.html. You can also use the Fill & Sign service on Acrobat.com to fill any PDF form.
    What troubles are your recipients encountering? And those who do have trouble--how are they filling out the form?
    Best,
    Sara

  • Advice From An Old Guy

    Times change, moderators come and go. Here is some advice from an old timer to any new moderators, and those that may desire to be one in the future. I was never an official full fledged moderator here at this forum or at others. Be that as it may, there are in my opinion, 3 'basic' elements to make a good moderator 'tech' wise, as I won't discuss the other factors such as maturity level and that kind of thing. Those 3 elements are;
    #1 - Experience with the brand products, experience with other brands can also be helpful.
    #2 - Product research, research, and continued research. Tech is a continuous conveyor belt on the move and changing all the time.
    #3 - Sharing the experience and knowledge learned.
    Additional advice, download the product pdf manuals, quick guides, etc.. and study them! Using Intel based as an example, start with the MSI 6 series boards, i.e. P6N Platinum SLI, P6N Diamond, then move to P45 Platinum, X58's, P67's, Z68's, and so forth. Same for graphics cards, etc.. Create an easy to use comprehensive set of categorized library files for yourself. Again, using Intel as an example, download their current product datasheets and Thermal and Design Guides on both CPU 'and' chipsets. Get a copy of the current JEDEC sheets concerning RAM industry specifications. Experience and shared knowledge, of which there is not a substitute for.
     

    Yes, as a matter of fact, I 'am' trying to 'guide' you into being a better moderator. Speaking SATA III vocally is different than in print is it not? It is not an apples to apples comparison. You are held to a higher standard, and 'printed' SATA3 is 'not' right 'technically when discussing SATA other than a SATA port, but SATA 3 is at least 'somewhat' better acceptable than SATA3. MSI uses SATA 3 in the BBX II I am using at the moment in the BIOS, and it is technically incorrect. We could also debate IDE nomenclature, SATA, PATA, flat cable, etc., and what it all means. 'IDE' Mode when running a SATA drive? It can get confusing to some people. That is why the more correct the nomenclature is written, the easier to understand what a person is really trying to convey. 
    In the future? I don't actively contribute in the regular threads anymore, only active here in AUTS once in awhile, so my comments are going to be done in here, and it was applicable to 'this' thread. The whole purpose of this thread was actually drafted for your benefit, if you hadn't figure that out already. 
     

  • Can't open PDF attachment in e-mail sent from Outlook, says I need to save first, how?

    Cannot open PDF attachment in webmail sent from Outlook, says I need to save first; how do I save the link?

    Looks like another user asked similar question with over 600 views and no replies ... hmmm.  When I click on the attachment, it says I must save it to my disk; with one button mouse just click once and save?  I've tried dragging and saving the attachment to word doc but opened up with a page of garbled words/symbols,etc.  Any ideas are welcome.

  • I just updated to ps cc 2014 with help from a chat person and all of my actions have dissapeared how can i find them?

    I just updated to ps cc 2014 with help from a chat person and all of my actions have disappeared how can i find them?

    Do you still have your old version of Photoshop loaded? You need to open that, and save your actions so that you can open them in 2014.

  • Regarding EFT Remittance Advice from F110

    Hello ,
    Can I use Smartfrom instead of SAP Script for creating EFT Remittance Advice from.
    Because it does not show the option for Smartform in the customizing.
    It gives option only for SAP Script or PDF form.
    Regards
    Sachin yadav

    I think this has been asked several times before, please use Search. This is ust one of the first links in Google:
    Smart form for Payment Advice
    You might need to write a custom program. Also search OSS notes, there might be something there.
    There is also a separate forum for the forms questions, actually....

  • HT4009 I'm trying to make and in-app purchase on my ipad  on which there is £14 credit (gift crd redeemed) however it's asking that because I have signed in from another device I need to verify my payment info, which I do but it declines? And I have funds

    I'm trying to make and in-app purchase on my ipad  on which there is £14 credit (gift crd redeemed) however it's asking that because I have signed in from another device I need to verify my payment info, which I do but it declines? And I have funds?
    I've even tried another card and get the same. Confused. Any advice?

    You have a Puerto Rico address on your account ? From a quick search I've found one site from somebody in Puerto Rico that includes a screenshot for an app receipt showing tax of 7 cents added to a 99 cent purchase. Are you able to view the purchase history on the account that you've been using, and see what prices show on them (e.g. if the store's listed price or price plus tax) : Store > View Account menu option on a computer's iTunes, then 'see all' link next to the Purchase History section.

  • Accomodating Macintosh HD to personal needs

    As a new Mac user, I have tried accomodating the HD to my personal needs, and unfortunately, this resulted in loosing all my files (worst of all, all my most recent not-backed-up files). What I did was to place all my files directly in the very left column when first opening the HD, and also, I moved around the Library folder.
    My question is now: Is it safe for me to create a new folder in the very left column of the Macintosh HD (for instance, named Andyana's files) and subsequently fill in all my files in the subfolders in its right columns? My only wish is to not loose all my data once again...
    Thanks,
    Andyana

    In the article KB 106805, Mac OS X: "Broken folder" icon, prohibitory sign, or kernel panic when computer starts it states:
    Here are examples of items from the root level of your Mac OS X startup volume that you should not delete or move:
    mach_kernel (an invisible file)
    Applications (a visible folder)
    automount (an invisible folder)
    Library (a visible folder)
    System (a visible folder)
    Users (a visible folder)

  • Problem: I lost the option to get the sound from external speakers or headphones to upgrade to Lion 10.7.3. It accepts only internal speakers.  I downloaded  Combo directly. I followed all the advice from the Apple community

    Problem: I lost the option to get the sound from external speakers or headphones to upgrade to Lion 10.7.3. It accepts only internal speakers.  I downloaded  Combo directly , without using "Actualización de software". I followed all the advice from the Apple community.  Can I use bluetooth speakers to solve this problem?  My Computer: iMac. 20-inch, Early 2008. Processor 2.4 GHz Intel Core 2 Duo.

    You may need to reset PRAM/NVRAM.
    First, check that the jack is clean. Put some alcohol on a plug and insert it a few times. See if that helps.
    is your output both digital and analog? If digital, is the red laser light visible in the socket? Do not look directly into the socket when checking.
    If all else fails try a PRAM reset:
    Reset your computer’s PRAM
    A small amount of your computer’s memory, called “parameter random-access memory” or PRAM, stores certain settings in a location that Mac OS X can access quickly. The particular settings that are stored depend on your type of Mac and the types of devices connected to it. The settings include your designated startup disk, display resolution, speaker volume, and other information.
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Immediately press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Continue holding the keys down until the computer restarts, and you hear the startup sound for the second time.
    DO NOT HOLD These keys beyond the second startup sound!
    Release the keys.
    Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.

Maybe you are looking for