OVM Manager 2.2.2: server pool error with file system type

I'm just getting started with OVM. I've installed OVM on one machine and the manager on another.
I created a server pool, which seemed to work OK but shows "Error" in the table under the "Server Pools" tab in the manager interface
When I edit it I see
Error: OVM-1011 OVM Manager communication with NNN.NNN.NN.NNN for operation Pre-check cluster root for Server Pool failed: <Exception: SR '/dev/sda3' not supported: type 'ocfs2.local' not in ['nfs', 'ocfs2.cluster']>
Can anyone explain this? Does this mean I can't use a local file system in OVM 2.2.2? I understood this was the case with OVM 3, which is why I went with 2.2.2.
Thanks.

Roger Ford wrote:
Error: OVM-1011 OVM Manager communication with NNN.NNN.NN.NNN for operation Pre-check cluster root for Server Pool failed: <Exception: SR '/dev/sda3' not supported: type 'ocfs2.local' not in ['nfs', 'ocfs2.cluster']>
Can anyone explain this? Does this mean I can't use a local file system in OVM 2.2.2? I understood this was the case with OVM 3, which is why I went with 2.2.2.You can't created a clustered pool with a local filesystem. You need to format the filesystem with ocfs2 in clustered mode.

Similar Messages

Memory Management, Crit Structure Corrupt, Bad Pool Caller, ntfs file system error

So after freshly installing Win 8.1 I was happy, untill I started to play some games that I previously played on Win 7, I've started to get a whole heap of errors, I did have more written down but have lost the bit of paper they were written on.
Here are the list of errors I can remember.
Memory Management, Crit Structure Corrupt, Bad Pool Caller, ntfs file system error
Specs:
Operating System
Windows 8.1 Pro 64-bit
CPU
AMD Athlon II X2 250
35 °C
Regor 45nm Technology
RAM
6.00GB Dual-Channel DDR2 @ 400MHz (5-5-5-18)
Motherboard
ASUSTeK Computer INC. M3N-H/HDMI (Socket AM2 )
40 °C
Graphics
SyncMaster (1440x900@60Hz)
SAMSUNG (1440x900@60Hz)
ATI Radeon HD 4800 Series (Microsoft Corporation - WDDM v1.1) (Sapphire/PCPartner)
Storage
698GB Western Digital WDC WD7500AAKS-00RBA0 ATA Device (SATA)

Adam
These are Related to
atikmdag.sys ATI Radeon Kernel Mode Driver. Yours is 2+ years old. I would update to the newest driver available.
Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Ken\Desktop\A040614-65203-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.16384.amd64fre.winblue_rtm.130821-1623
Machine Name:
Kernel base = 0xfffff803`be013000 PsLoadedModuleList = 0xfffff803`be2da9b0
Debug session time: Mon Apr 7 00:35:03.785 2014 (UTC - 4:00)
System Uptime: 0 days 0:08:48.334
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 3B, {c0000005, fffff80001cf7d73, ffffd0002305c470, 0}
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
Probably caused by : atikmdag.sys ( atikmdag+70d73 )
Followup: MachineOwner
0: kd> !analyze -v
* Bugcheck Analysis *
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff80001cf7d73, Address of the instruction which caused the bugcheck
Arg3: ffffd0002305c470, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
Debugging Details:
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
atikmdag+70d73
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx]
CONTEXT: ffffd0002305c470 -- (.cxr 0xffffd0002305c470;r)
rax=0000000000000000 rbx=ffffcf80021783a0 rcx=ffffcf8002334ff5
rdx=0000307ffdccb010 rsi=ffffcf8004734470 rdi=ffffcf80021783a0
rip=fffff80001cf7d73 rsp=ffffd0002305cea8 rbp=ffffd0002305cf00
r8=0000000000000006 r9=0000000000000000 r10=0000000000000384
r11=ffffcf8002334ff0 r12=0000000000000001 r13=ffffcf8004734470
r14=0000000000000000 r15=ffffcf8004734470
iopl=0 nv up ei ng nz na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010286
atikmdag+0x70d73:
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx] ds:002b:00000000`00000005=??
Last set context:
rax=0000000000000000 rbx=ffffcf80021783a0 rcx=ffffcf8002334ff5
rdx=0000307ffdccb010 rsi=ffffcf8004734470 rdi=ffffcf80021783a0
rip=fffff80001cf7d73 rsp=ffffd0002305cea8 rbp=ffffd0002305cf00
r8=0000000000000006 r9=0000000000000000 r10=0000000000000384
r11=ffffcf8002334ff0 r12=0000000000000001 r13=ffffcf8004734470
r14=0000000000000000 r15=ffffcf8004734470
iopl=0 nv up ei ng nz na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010286
atikmdag+0x70d73:
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx] ds:002b:00000000`00000005=??
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
BUGCHECK_STR: 0x3B
PROCESS_NAME: csrss.exe
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
LAST_CONTROL_TRANSFER: from fffff800025cf3d7 to fffff80001cf7d73
STACK_TEXT:
ffffd000`2305cea8 fffff800`025cf3d7 : ffffcf80`04734470 ffffcf80`04734470 00000000`00000000 ffffcf80`01f52450 : atikmdag+0x70d73
ffffd000`2305ceb0 ffffcf80`04734470 : ffffcf80`04734470 00000000`00000000 ffffcf80`01f52450 ffffd000`2305cf00 : atikmdag+0x9483d7
ffffd000`2305ceb8 ffffcf80`04734470 : 00000000`00000000 ffffcf80`01f52450 ffffd000`2305cf00 fffff800`025f48d3 : 0xffffcf80`04734470
ffffd000`2305cec0 00000000`00000000 : ffffcf80`01f52450 ffffd000`2305cf00 fffff800`025f48d3 ffffcf80`04734470 : 0xffffcf80`04734470
FOLLOWUP_IP:
atikmdag+70d73
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx]
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: atikmdag+70d73
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: atikmdag
IMAGE_NAME: atikmdag.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4fdf9bbd
STACK_COMMAND: .cxr 0xffffd0002305c470 ; kb
FAILURE_BUCKET_ID: 0x3B_VRF_atikmdag+70d73
BUCKET_ID: 0x3B_VRF_atikmdag+70d73
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x3b_vrf_atikmdag+70d73
FAILURE_ID_HASH: {1ec4cdaf-008d-03dd-4ca9-ade1993441da}
Followup: MachineOwner
Wanikiya and Dyami--Team Zigzag

Oracle VM Server 2.2.1 FIle System Type

I have installed VM server 2.2.1, but i recently ran into disk size problems and want to resize. I have no space on the / partition and all my space on the /var/ovs/mount/"randomnumber". When i used the parted command "print" to see my partitions, the /var partition has no file system type such as ext3 or ext2. The / partition has ext3. Does anyone know why the /var/ovs/mount/"randomnumber" has no file system type because without this I can not resize the partition. Let me also say that when i installed VM server i pretty much took all the defaults so the partitions were created this way by default.
Thanks

Paul_RealityTech wrote:
I have installed VM server 2.2.1, but i recently ran into disk size problems and want to resize. I have no space on the / partition and all my space on the /var/ovs/mount/"randomnumber". When i used the parted command "print" to see my partitions, the /var partition has no file system type such as ext3 or ext2. The / partition has ext3. Does anyone know why the /var/ovs/mount/"randomnumber" has no file system type because without this I can not resize the partition. Let me also say that when i installed VM server i pretty much took all the defaults so the partitions were created this way by default./var/ovs/mount/UUID is ocfs2 and cannot be shrunk in size.

Error with "File System" destination only in a Publication

Hello,
I am able to have individual reports run & refresh to a File System destination, but when I attempt to have the same reports, as part of a Publication, save to a File System destination, I receive this error in the log:
ERROR PublishingService:HandlerPool-32 BusinessObjects_PublicationAdminLog_Instance_15516 - Publication ID # 15516 - Distribution to destination CrystalEnterprise.DiskUnmanaged ... destination DLL disabled. [http://CrystalEnterprise.DiskUnmanaged ([1]/1])]: [ (FBE60013)
If I use Email instead of File System in this Publication, the Publication runs fine, no issues.
Thanks for any help.

Let's start with proper terminology
You're not sending report to unmanaged disk, you're scheduling it there.
When you use publication - you're publising it there.
2 different worflows, that use 2 different servers. Each server has to be configured for this functionality.
It is done in CMC in servers properties.
Admin guide will give you information on what each server in BO architecture is responcible for and what are the parameters that needs to be set for various workflows.

Virtual server is already managed by another virtual server pool

I was trying to register a server to a server pool on OEM 10.2.0.5 console, on the first try it never completed the registration, it errored out. After doing 'clear operation error' I try to register the same server, Now I get "virtual server is already managed by another virtual server pool". Does any one ran into similar situation? How do I clear this? Thank you.

user589547 wrote:
I was trying to register a server to a server pool on OEM 10.2.0.5 console, on the first try it never completed the registration, it errored out. After doing 'clear operation error' I try to register the same server, Now I get "virtual server is already managed by another virtual server pool". Does any one ran into similar situation? How do I clear this? Thank you.It's fairly simple to clear. First, stop the ovs-agent on the server:
# service ovs-agent stopThen, remove the local ovs-agent database:
# rm -rf /etc/ovs-agent/db Then, start the agent again:
# service ovs-agent startThe agent will now be reset back to an unconfigured state.

My Extensis suitcase 11.0.4 is no longer working with my system OSX10.6.8, what is the best and cheapest font management software to use that's compatible with this system and CS software

my Extensis suitcaseX 11.0.4 is no longer working with my system OSX10.6.8, what is the best and cheapest font management software to use that's compatible with this system and my existing CS design software?

If you upgraded to Snow Leopard, then it would seem that Suitcase 11 is not compatible with Snow Leopard and you'd need to buy Suitcase Fusion 3 for $99.95.

[SOLVED] ERROR: Unable to determine the file system type of /dev/root:

:: Running Hook [udev]
:: Triggering uevents...done
Root device '804' doesn't exist.
Creating root device /dev/root with major 8 and minor 4.
error: /dev/root: No such device or address
ERROR: Unable to determine the file system type of /dev/root:
Either it contains no filesystem, an unknown filesystem,
or more than one valid file system signature was found.
Try adding
rootfstype=your_filesystem_type
to the kernelcommand line.
You are now being dropped into an emergency shell.
/bin/sh: can't access tty; job control turned off
[ramfs /]# [ 1.376738] Refined TSC clocksource calibration: 3013.000 MHz.
[ 1.376775] Switching to clocksource tsc
That's what I get when I boot my Arch system. It worked fine for quite a while, but suddenly it ran into an error where the SCSI driver module was corrupt. I fixed it by reinstalling util-linux-ng and kernel26, however, I run into this issue now. http://www.pastie.org/2163181 < Link to /var/log/pacman.log for the month of July, just in case. Yes, I bought a new ATI/AMD Radeon HD 5450 this Saturday, but it seemed to work fine till this broke and it works fine on Ubuntu too, so I suppose we can rule it out.
Last edited by SgrA (2011-07-05 20:45:36)

Autodetection failed on your first image, in both your previous kernel installs:
[2011-07-04 16:14] find: `/sys/devices': No such file or directory
Which means that sysfs was not mounted. You should be able to boot from the fallback image, which does not use autodetect. Figure out why /sys isn't mounted, as well, and fix that.
This is also a somewhat crappy bug in mkinitcpio that lets you create an autodetect image that's useless. It'll be fixed in the next version of mkinitcpio that makes it to core.
Last edited by falconindy (2011-07-04 17:41:19)

1)Could not start up os x 2)Only could start bootcamp 3)Tried resetting nvram 4)Could not start even in bootcamp 5)Verify disk says -. Verifying volume "Macintosh HD" Error: Live file system repair is not supported 6)Installed maverick on USB d

1) Could not start up os x
2) Only could start bootcamp
3) Tried resetting nvram
4) Could not start even in bootcamp
5) Verify disk says …. Verifying volume “Macintosh HD”
Error: Live file system repair is not supported
6) Installed maverick on USB drive
7) Boot from USB drive. Tried verifying HD: Volume header needs minor repair. The volume Recovery HD was found corrupt and needs to be repaired. Verifying volume “Macintosh HD”: Error: live file system repair is not supported.
8) The terminal code says
9) Last login: Wed Feb 11 14:09:47 on console
10) xxxx-MacBook:~ xxxx$ diskutil list
11) /dev/disk0
12) #: TYPE NAME SIZE       IDENTIFIER
13) 0:      GUID_partition_scheme *160.0 GB   disk0
14) 1: EFI EFI 209.7 MB   disk0s1
15) 2:                  Apple_HFS Macintosh HD            80.1 GB disk0s2
16) 3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
17) 4:       Microsoft Basic Data 50.0 GB    disk0s4
18) /dev/disk1
19) #: TYPE NAME SIZE       IDENTIFIER
20) 0:      GUID_partition_scheme *15.6 GB    disk1
21) 1: EFI EFI 209.7 MB   disk1s1
22) 2:                  Apple_HFS BOOT                    14.8 GB    disk1s2
23) 3:                 Apple_Boot Recovery HD             650.0 MB   disk1s3
24) Saeedehs-MacBook:~ saeedehmirbagheri$ diskutil cs list
25) No CoreStorage logical volume groups found
26) Saeedehs-MacBook:~ saeedehmirbagheri$ sudo gpt -vv -r show /dev/disk0
27) Password:
28) gpt show: /dev/disk0: mediasize=160041885696; sectorsize=512; blocks=312581808
29) gpt show: /dev/disk0: PMBR at sector 0
30) gpt show: /dev/disk0: Pri GPT at sector 1
31) gpt show: /dev/disk0: Sec GPT at sector 312581807
32) start       size index contents
33) 0          1 PMBR
34) 1          1 Pri GPT header
35) 2         32 Pri GPT table
36) 34          6
37) 40     409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
38) 409640 156394528      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
39) 156804168    1269544      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
40) 158073712   56853648
41) 214927360   97652736      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
42) 312580096       1679
43) 312581775         32         Sec GPT table
44) 312581807          1         Sec GPT header
45) xxxx-MacBook:~ xxxx$ sudo fdisk /dev/disk0
46) Disk: /dev/disk0 geometry: 19457/255/63 [312581808 sectors]
47) Signature: 0xAA55
48) Starting       Ending
49) #: id cyl hd sec - cyl hd sec [     start - size]
50) ------------------------------------------------------------------------

Thank you -
I booted from external USB. The diskutil list output is from OS x booting from the USB, which shows the following:
Saeedehs-MacBook:~ saeedehmirbagheri$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *160.0 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            80.1 GB    disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
   4:       Microsoft Basic Data                         50.0 GB    disk0s4
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *15.6 GB    disk1
   1:                        EFI EFI                     209.7 MB   disk1s1
   2:                  Apple_HFS BOOT                    14.8 GB    disk1s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk1s3
Saeedehs-MacBook:~ saeedehmirbagheri$ diskutil cs list
No CoreStorage logical volume groups found
I am not able to use target disk mode because I don't have firewire/thunderbolt ports.

Sign on problems within Elements 10; plus cannot backup writing files error with file catalog.pse10db. No indication what the problem is. How do I get adobe help with these problems?

Sign on problems within Elements 10; plus cannot backup, writing files error with file catalog.pse10db. No indication what the problem is. How do I get adobe help with these problems?

Sign on problems within Elements 10; plus cannot backup, writing files error with file catalog.pse10db. No indication what the problem is. How do I get adobe help with these problems?

What does LabVIEW mean by "Error 71: File Datalog Type Conflict"

What does LabVIEW mean by "Error 71: File Datalog Type Conflict" (Hex code:47)
Thank you.

Please provide us further information on when you are getting the error and what the functionality of the VI is. That would help us to troubleshoot your issue.
Is the error caused by a similar situation as the one descibed in this KnowledgeBase?
Best regards,
Philip C.
National Instruments
- Philip Courtois, Thinkbot Solutions

Boot up - Error Message: "File System not clean"

<blockquote>Locked by Moderator as a duplicate/re-post.
Please continue the discussion in this thread: [tiki-view_forum_thread.php?locale=en-US&comments_parentId=667528&forumId=1]
Thanks - c</blockquote>
== Issue
==
I have another kind of problem with Firefox
== Description
==
At start up displays error message: File System not Clean"
== start up computer
==
== Troubleshooting information
==
WebOfTrust, AdBlock Plus 1.2, Ubuntu Firefox Modifications 0.7, Firefox Universal Uploader (fireuploader) 0.4.1, Foxytunes 4.0.6
== Firefox version
==
3.0.19
== Operating system
==
Linux
== User Agent
==
Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.0.19) Gecko/2010040116 Ubuntu/9.04 (jaunty) Firefox/3.0.19 GTB7.0
== Plugins installed
==
*-The default plugin handles plugin data for mimetypes and extensions that are not specified and facilitates downloading of new plugins.
*The demo print plugin for unix.
*Shockwave Flash 10.0 r45
*DivX Web Player version 1.4.0.233
*The Totem 2.26.1 plugin handles video and audio streams.

http://ubuntuforums.org/

Communication error with external system ( VERTEX )

Hi Folks,
While creation the Credit memo request or Sales order /invoice system giving the error message " COmmunication error with external system ( VERTEX ) " and stopping to proceed further and even not able to post the accounting document.
Please help me out here.
Answers will be appreciated and rewared.
Regards,
Ram.

Hi,
check this below thread
Communication error with the external tax system (VERTEX_MS0018)
OR
Remove V from the Extrernal System at the location IMG->financial Accounting->Financial Accounting Global Settings->Tax on Sales/Purchases->Basic Settings->External Tax Calculation->Activate External Tax Calculation
Reg,
JJ
Edited by: Jagsap on Mar 5, 2010 1:15 PM

[OVM 3.0.3] Rebuild server pool from existing servers with running VMs.

Hello everyone,
We would like to reinitialize the OVM Manager database since it's in a pretty "bad state": since it's been used for heavy test purposes there are object that cannot be deleted.
However, one of the OVM servers in a server pool is running production VMs.
Is it possibile to clean the OVM Manager DB and rediscover the existing server without loosing its machines?
Would someone suggest other options?
Think of it as a disaster recovery test...
All storage pools are SAN LUNs.
Best regards,
Alessandro
Edited by: Alessandro Baldoni on Apr 23, 2012 12:20 PM

Alessandro Baldoni wrote:
Is it possibile to clean the OVM Manager DB and rediscover the existing server without loosing its machines?Yes. Grab the UUID of the current Manager install from the Help -> About screen.
Uninstall the Manager.
Install a new Manager (using SE or EE as your database, as you're going into production) and pass the UUID to the runInstaller script using the -u parameter.
Discover your servers in the new Manager -- all the server pool information will be recreated.
If you have any iSCSI or NFS storage servers, add those back and then Refresh the Repositories.
Refresh/Rediscover the servers -- all the VMs will reappear, under the servers upon which they're running.
Note that the only thing you currently lose is the friendly name of your ISO images and VirtualDisk images.

Unable to add File Server Resource Manager Tools on Windows Server 2012 - Errors on restart and roll back install

Unable to install Windows Server 2012 Feature - [Tools] File Server Resource Manager Tools.
Installs, however when I restart the server error messages appears saying feature unable to install, windows reverting changes.
In the Setup event logs have the following information message "Update FSRM-Infrastructure of package FSRM-All failed to be turned on. Status: 0x800f0922"
Does anyone have any idea's on why this Feature can not be installed ??
Scott

Hi Shaun
Tried both of your suggestions, however neither strategy worked.
Strategy 1
Tried installing via powershell - "install-windowsfeature -name fs-resource-manager -includemanagementtools"
Feature un-installed itself during the restart.
Attempted to use the command "DISM /online /remove-feature /featurename:FSRM-Infrastructure-Services". However
this did work because one the Service was'nt installed or two because there was no command option for "/remove-feature"
PACKAGE SERVICING COMMANDS:
/Add-Package - Adds packages to the image.
/Remove-Package - Removes packages from the image.
/Enable-Feature - Enables a specific feature in the image.
/Disable-Feature - Disables a specific feature in the image.
/Get-Packages - Displays information about all packages in the image.
/Get-PackageInfo - Displays information about a specific package.
/Get-Features - Displays information about all features in a package.
/Get-FeatureInfo - Displays information about a specific feature.
/Cleanup-Image - Performs cleanup and recovery operations on the image.
Strategy 2
Tried installing via powershell, using the following command DISM
/online /enable-feature /featurename:FSRM-Infrastructure-Services, however got the same result, the install backed out during the restart.
All up back to where I started?

Can't import ISO Files in VM Manager because of empty Server Pool Drop Down

Hello,
I have the problem I can't import ISO files to my ressources because in the import mask the Server Pool Name Drop Down is empty. In the Virtual Machine Templates mask the Server Pool Name is available and I have already one VM running with a oracle template.
The Server is 2.2.1 and the vm manager is 2.2.0. The server is a Pentium 4 3.2 GHz with 4 MB of RAM. The High Availabiliy Mode is enabled for this server pool.
Has anyone an idea what the problem could be?
Any help will be appreciated.
Thx in forward
Ben

I am not expert in this area myself, but I believe the issue may be with shared storage changes that are needed for high availability.
The following reference may help: http://download.oracle.com/docs/cd/E15458_01/doc.22/e15444/ha.htm
I may of course be misleading you completely.

OVM Manager 2.2.2: server pool error with file system type

Similar Messages

Maybe you are looking for