OWB 11g on Linux 64-bit security problem
Hello guys,
Our database (11.1.0.7.0) is under Linux 64-bit. Is there any way to start embedded OWB (which is part of the database install) from a different OS user than the owner of the Oracle binaries ?
Due to the VERY slow response time, it is not practical for us to use an OWB standalone Windows version as a client to connect to the repository installed on Linux; so, the only option is to have the OWB client on the same machine as database. But this means to give developers access to the Linux box (using VNC), using the OS user who owns Oracle binaries; this is a very serious security threat, as they, for example, can connect as SYSDBA into db.
When we were using 10g (database + OWB), it was possible to install OWB on the same box as db, but in a different OS user (not in dba group) and to access design repository/control center. For 10g it was released a 64-bit version of OWB. It's not the case with 11g. Also, support told us that it isn't supported to use 32-bit OWB binaries installed on 64-bit Linux.
Any inputs are appreciated.
Regards.
I donot know whether i understood your problem correctly or not but.
i donot understant the point
But this means to give developers access to the Linux box (using VNC), using the OS user who owns Oracle binaries; this is a very serious security threat, as they, for example, can connect as SYSDBA into db."Previously, each Oracle Database utilized as a repository for this product required a user with SYSDBA privileges. Beginning in this release, this is no longer required. A schema OWBSYS is created while installing Oracle Database 11g Release 1 (11.1). OWBSYS holds the metadata which is divided into workspaces. To start using Warehouse Builder, you just need to create a new workspace. You do not need SYSDBA privileges"
below is the link
http://oracle.su/owb.111/b31278/whatsnew.htm#CHDIBHGJ
Similar Messages
-
Starting OBIEE 11g on Linux 64 bit
Hi,
I installed OBIEE 11g on Linux 64 bit and it worked fine after installation. I rebooted the system and I need to start it again.
I am trying to run
run-sa.sh
run-saw.sh
etc.
but it looks like the scripts are broken:
./run-saw.sh: line 43: syntax error near unexpected token `('
./run-saw.sh: line 43: `ANA_INSTALL_DIR=$N($P(installLocation))'
it looks like these scripts were not processed by the installer during installation, $N($P(installLocation)) should have been replaced by the installer with actual paths I assume.
is there another way to start OBIEE?
Thanks,
CalinAre you sure you are running OBIEE 11g? YOu are meant to use those scripts any more in 11g. See this post:
Startup Scripts for OBIEE 11g on Linux -
Error installing OBIEE 11g on Linux 64 bits - Configuration Assistant fails
Hello,
I am trying to install OBISE1 on Oracle Linux 5 - 64 bits.
I've followed these steps:
1) Install Oracle DB
2) Install jdk Linux 64 bits (jdk1.7.0)
3) Install WebLogic
4) Install RCU
5) Install OBI 11g (Software only installation)
Until here, all is correct.
6) Configuration assistant failed:
[2011-09-12T12:04:58.844+02:00] [as] [ERROR] [] [oracle.as.provisioning]
[tid: 14] [ecid: 0000J9Soq_rFGBWFLz6UOA1ERSJh000005,0]
[2011-09-12T12:04:58.845+02:00] [as] [ERROR] [] [oracle.as.provisioning]
[tid: 14] [ecid: 0000J9Soq_rFGBWFLz6UOA1ERSJh000005,0] [[
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3149)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3039)
at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
[2011-09-12T12:04:58.846+02:00] [as] [ERROR] [] [oracle.as.provisioning]
[tid: 14] [ecid: 0000J9Soq_rFGBWFLz6UOA1ERSJh000005,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
I have fount posts with a similar problem, but is over Windows.
I appreciate any ide/suggestion.
Thank you in advance.
Regards,I have seen that WebLogic is shut down, so I am trying to start up, but I can't:
starting weblogic with Java version:
Unrecognized option: -jrockit
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
Starting WLS with line:
/usr/java/jdk1.7.0/bin/java -jrockit -Xms512m -Xmx512m
-Dweblogic.Name=AdminServer
-Djava.security.policy=/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy
-Dweblogic.ProductionModeEnabled=true -da
-Dplatform.home=/root/Oracle/Middleware/wlserver_10.3
-Dwls.home=/root/Oracle/Middleware/wlserver_10.3/server
-Dweblogic.home=/root/Oracle/Middleware/wlserver_10.3/server
-Dweblogic.management.discover=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=/root/Oracle/Middleware/patch_wls1035/profiles/default/sysext_manifest_classpath:/root/Oracle/Middleware/patch_ocp360/profiles/default/sysext_manifest_classpath
weblogic.Server
Unrecognized option: -jrockit
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
I have modified /etc/profile, including JAVA_HOME and PATH with the java PATH. And it is ok, because if I executed java -version I can see the new jdk:
java version "1.7.0"
Java(TM) SE Runtime Environment (build 1.7.0-b147)
Java HotSpot(TM) 64-Bit Server VM (build 21.0-b17, mixed mode)
Any idea¿? -
/lib32 folder required for Oracle 11g on Linux 32 bit
Hi,
I have 64 bit linux and Oracle 11g installed but one of my applications is using 32-bit libraries.
So i am thinking of copying the lib32 folder in ORACLE_HOME and paste the path in LD_LIBRARY_PATH.
Will it work or not????
If YES, i need the lib32 folder for Oracle 11g R2 on Linux 32 bit. Can someone please tell me from where can i download it?Hi;
In addition to Srini, I suggest to review:
Master Note For Oracle Database Client Installation [ID 1157463.1]
Client / Server / Interoperability Support Between Different Oracle Versions [ID 207303.1]
Regard
Helios -
Bad interpreter: Permission denied whn installin ORACLE 11g on linux 32 bit
Hello All,
I have a VMWare that i installed into it Oracle enterprise Linux 5 32 bit, i am trying to install Oracle 11g R2 on it, i have the .iso oracle file, l linked the CD/DVD drive of the VMware to the location of this ISO file, and i applied all the steps mentioned in this link : http://www.oracle-base.com/articles/11g/OracleDB11gR2InstallationOnEnterpriseLinux5.php
i did: cd media and i found the runInstaller file but wen trying to run it: ./runInstaller i am facing the below :
[root@oel5 media]# cd V17489-01/
[root@oel5 V17489-01]# ls
doc install response rpm runInstaller sshsetup stage welcome.html
[root@oel5 V17489-01]# ./runInstaller
-bash: ./runInstaller: /bin/sh: bad interpreter: Permission denied
your help is appreciated please.
Regards,The problem is that gnome-mount will not give you execute rights on CD/DVD content. The solution is at the below link in the Tips section:
Installing Oracle 11g R2 on Ubuntu 10 Howto
Logout your current X-session and login as user Oracle
Insert the Oracle Installation DVD
Or from a remote terminal session:
Insert the Oracle Installation DVD
sudo umount /dev/sr0
Create a new session as user Oracle
ssh -Y oracle@server_address
sudo mount /dev/sr0 /media
/media/database/runInstaller
If you see "runinstaller" instead of "runInstaller" you can try the following:
sudo mount -o loop,norock /dev/cdrom /media
more also here:
runInstaller ".oui: No such file" / "bad interpreter: Permission denied"
Edited by: Joe Shmoe on Nov 5, 2010 11:45 AM -
Error on Install BI 11.1.5 on Linux 64 bit
On my Linux 64 bit (Centos 5.6), with Oracle DB 11gR2 on the same machine, the Install of BI 11.1.5 fail
creating AsInstance' failed
The log
[2011-05-10T18:43:17.365+02:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 34] [ecid: 0000IzQl9YxFw000jzwkno1DmMQ400000P,0] [[
oracle.as.management.opmn.optic.OpticException: Error in starting opmn server
Operation aborted because of a system call failure or internal error
at oracle.as.management.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:310)
at oracle.as.management.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:87)
at oracle.as.provisioning.fmwadmin.ASInstanceProv._createInstance(ASInstanceProv.java:254)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstance(ASInstanceProv.java:166)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:116)
at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:523)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:439)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.InstanceProvisioningTask.doExecute(InstanceProvisioningTask.java:81)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
[2011-05-10T18:43:17.368+02:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 34] [ecid: 0000IzQl9YxFw000jzwkno1DmMQ400000P,0] Exit code from OPMNAdmin : 2
[2011-05-10T18:43:17.368+02:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 34] [ecid: 0000IzQl9YxFw000jzwkno1DmMQ400000P,0] [[
oracle.as.provisioning.engine.CfgWorkflowException
at oracle.as.provisioning.engine.Engine.processEventResponse(Engine.java:596)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstance(ASInstanceProv.java:178)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:116)
at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:523)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:439)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.InstanceProvisioningTask.doExecute(InstanceProvisioningTask.java:81)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.util.ConfigException:
Error creating ASInstance instance1.
Cause:
An internal operation has failed: Error in starting opmn server
Operation aborted because of a system call failure or internal error
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.fmwadmin.ASInstanceProv._createInstance(ASInstanceProv.java:317)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstance(ASInstanceProv.java:166)
... 18 more
Caused by: oracle.as.management.opmn.optic.OpticException: Error in starting opmn server
Operation aborted because of a system call failure or internal error
at oracle.as.management.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:310)
at oracle.as.management.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:87)
at oracle.as.provisioning.fmwadmin.ASInstanceProv._createInstance(ASInstanceProv.java:254)
... 19 more
Thanks for any help, RobertoThanks a lot for the help.
+Installing OBIEE 11g On Linux 64-bit Fails Running The Configuration Assistant With "Step Creating Asinstance Failed" [ID 1304640.1]+
I check for the library libaio, and it's all ok on my system.
+Error: "Oracle.as.provisioning.util.ConfigException: Error While Starting the Domain." Whilst Installing OBIEE 11G [ID 1272906.1]+
I check on my DNS server, and seem have some problem.
So, i try with IP static, and works !
Roberto -
Hi,
Ive deen downloading Oracle Business Intelligence 11.1.1.0.0 for Linux x86 64-bit Part # B60230-13. Theres EPM System Release 11.1.2.2.0 for Linux x86-64 Part 1 thru 4 and then Part 6 thru 7.
Is Part 5 missing or not needed ? Can someone pl. confirm if this media pack is complete and that they didnt have problems installing.Thanks a lot for the help.
+Installing OBIEE 11g On Linux 64-bit Fails Running The Configuration Assistant With "Step Creating Asinstance Failed" [ID 1304640.1]+
I check for the library libaio, and it's all ok on my system.
+Error: "Oracle.as.provisioning.util.ConfigException: Error While Starting the Domain." Whilst Installing OBIEE 11G [ID 1272906.1]+
I check on my DNS server, and seem have some problem.
So, i try with IP static, and works !
Roberto -
OWB at Linux 64 Bit Environment
Hi All,
Iam new to Linux Environment.
Our client is recently started updating OS from Windows to Linux.
I would like to open Design centre in Linux server remotely from my desktop. Could you please provide steps?
Regards,
AvaYes, you can run OWB client directly on the server.
If you have a linux workstation, you can run Xwindows applications on server, and have the application window displayed on client!!! It is called X forwarding, and this is a feature that Xwindows had for years.
Connect to your server using ssh with -X switch, eg.
[alex@alex]$ ssh -X oracle@myserver
once connected, go to the owb directory and run the client, which will display the application window on the CLIENT (your workstation), eg.
[oracle@myserver ~]$ cd /oracle/product/11.2.0/dbhome_1/owb/bin/unix/
[oracle@myserver unix]$ ./owbclient.sh
This way requires no additional installation on your machine, but OWB running over ssh can be a bit laggy. However, it is very usable. You can try to speed up the connection by using a cypher that is somewhat less CPU intensive, ie arcfour. The login would be then:
[alex@alex]$ ssh -c arcfour -X oracle@myserver
Keep in mind, that running OWB client on the sever this way requires 500MB to 1GB of RAM more on the server (the client application is executing there).
The other option to run OWB on an linux 64bit workstation is to install the OWB 64bit (if you want to run 11g you can install the complete database server software, which comes with OWB) and run it normally on your workstation. This effectively limits the distribution you can use to red-hat, centos or fedora.
I'm running OWB 10.2 64bit on my fedora 64bit workstation for 2 years without any problems. It may not be certified, but runs without a glitch.
Bye -
Problem in OIM Installation in Linux-64 bit environment
Hi,
Components used
1. Oracle Database11gR1
2. Weblogic Application server 10.3.0(installed in non clustered mode)
3. OIM 9.1.0.1
Also ensured the above three are compatible.
I'm facing problem at the end of OIM installation in RedHat Linux-64 bit environment.
The error details in setup-weblogic.log file is given below
===================================
setup-startscript:
setup:
[echo] Setting up weblogic for xellerate complete.
[ant] Exiting /oracle/oimserver/xellerate/setup/weblogic-setup.xml.
BUILD FAILED
/oracle/oimserver/xellerate/setup/setup.xml:443: The following error occurred while executing this line:
/oracle/oimserver/xellerate/setup/weblogic-setup.xml:196: Could not create task or type of type: wlst.
Ant could not find the task or a class this task relies upon.
This is common and has a number of causes; the usual
solutions are to read the manual pages then download and
install needed JAR files, or fix the build file:
- You have misspelt 'wlst'.
Fix: check your spelling.
- The task needs an external JAR file to execute
and this is not found at the right place in the classpath.
Fix: check the documentation for dependencies.
Fix: declare the task.
- The task is an Ant optional task and the JAR file and/or libraries
implementing the functionality were not found at the time you
yourself built your installation of Ant from the Ant sources.
Fix: Look in the ANT_HOME/lib for the 'ant-' JAR corresponding to the
task and make sure it contains more than merely a META-INF/MANIFEST.MF.
If all it contains is the manifest, then rebuild Ant with the needed
libraries present in ${ant.home}/lib/optional/ , or alternatively,
download a pre-built release version from apache.org
- The build file was written for a later version of Ant
Fix: upgrade to at least the latest release version of Ant
- The task is not an Ant core or optional task
and needs to be declared using <taskdef>.
- You are attempting to use a task defined using
<presetdef> or <macrodef> but have spelt wrong or not
defined it at the point of use
Remember that for JAR files to be visible to Ant tasks implemented
in ANT_HOME/lib, the files must be in the same directory or on the
classpath
Please neither file bug reports on this problem, nor email the
Ant mailing lists, until all of these causes have been explored,
as this is not an Ant bug.
at org.apache.tools.ant.ProjectHelper.addLocationToBuildException(ProjectHelper.java:539)
at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:385)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
at org.apache.tools.ant.Main.runBuild(Main.java:668)
at org.apache.tools.ant.Main.startAnt(Main.java:187)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:246)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:67)
Caused by: /oracle/oimserver/xellerate/setup/weblogic-setup.xml:196: Could not create task or type of type: wlst.
Further, I have identified that the ant was unable to launch a custom web logic task, wlst.
This custom task of web logic task is invoked by ant using the following script in <OIM_HOME>/xellerate/setup/weblogic-setup.xml.
<target name="setup" depends="setup-startscript">
<echo>Setting up weblogic for xellerate complete.</echo>
<wlst properties="${basedir}/Profiles/${profile}" arguments='SETUP_CONFIG ${profile}
${weblogic_login_password} ${datasource_user_password} '
fileName="${basedir}/setup/oimconfig.py"
executeScriptBeforeFile="false"
failOnError="true">
</wlst>
<antcall target="stopServer"/>
<antcall target="startServer"/>
</target>
Also I have ensured the all the environmental variables, JAVAOPTIONS, USER_MEM_ARGS, ANT_OPTS are properly set before installing OIM.
I have tried several times but still getting the same error.
Please help me to resolve this issue.
Did anyone face this issue before??????
Edited by: Katheresh on May 17, 2010 9:36 PMI am not certain but when I was installing OIM 9.1.x with wls 10.3.0 on windows I had a failure too and it turned out I didn't create the wls domain user and group for OIM. The docs for OIM 9.1 does not talk about it so you may want to create this account and group and re-try the install. The steps are below:
Log in to the WebLogic Admin Console using your new account by pointing a web browser to the following url:
http://<hostname>:7001/console
1. Select Security, then Realms, then myrealm, and then Groups from the navigation panel on the left.
2. Select the Configure a new Group link in the Groups page.
3. Enter User for the group name in the Name field under the General tab and optionally enter a description for the group.Click Apply.
Note:
The group name User is case-sensitive.
4. Select Security, then Realms, then myrealm, and then Users from the navigation panel on the left.
5. Select the Configure a new User link in the Users page.
6. Enter Internal for the user name in the Name field under the General tab and optionally enter a description for the user.
Note:
The user name Internal is case-sensitive.
7. Enter and confirm a password associated with the user name Internal and click Apply.
8. Select the Groups tab.
9. Add the User group to the list of Current Groups for the Internal user by selecting User from the list of Possible Groups and clicking the --> right arrow button. Click Apply.
Please post back if it works,
Thanks, -
Problem installing OBIEE 11.1.1.6 on Linux 64-bit - redux
I had posted an issue earlier about not being able to install the Software Only on my Linux 64-bit. That problem has not been solved, but this is a new (possibly related) issue.
I created a brand new installation of Linux, with an Oracle 11gR2 database, and created the BI repositories using rcu for 11.1.1.6
I then navigated to bishiphome/Disk1/install/linux64 and ran runInstaller.
Everything looks fine, all the way up to Step 13 of 15, where the installer is supposed to start copying files. It "hangs up" at that point. The tests for adequate swap space and Temp space are passed:
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 1536 MB. Actual 4578 MB Passed
Checking swap space: must be greater than 500 MB. Actual 7999 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2013-04-03_12-13-01PM. Please wait ...
It is running into an issue with a String Index out of bounds - Exception in thread "AWT-EventQueue-0" java.lang.StringIndexOutOfBoundsException: String index out of range: -2
Here is the full .out file:
Adding /tmp/OraInstall2013-04-03_12-13-01PM for deletion.
Adding to classpath:file:/tmp/OraInstall2013-04-03_12-13-01PM/ext/jlib/bi.jar
Adding to classpath:file:/tmp/OraInstall2013-04-03_12-13-01PM/ext/jlib/template.jar
null
configFileName:/tmp/OraInstall2013-04-03_12-13-01PM/ext/jlib/footprint.xml
location of staticportsini =/home/oracle/staticports.ini
location of staticportsini =/home/oracle/staticports.ini
location of staticportsini =/home/oracle/staticports.ini
location of staticportsini =/home/oracle/staticports.ini
Setting current page standalone validations to true
Setting current page standalone validations to true
Setting current page standalone validations to true
Inside startPreReqOperation...prereq
contextFile:/tmp/OraInstall2013-04-03_12-13-01PM/prereq/oui/agent_prereq_context.xml
The entry point is: oracle.installType.all
Check Name:CertifiedVersions
Check Description:This is a prerequisite condition to test whether the Oracle software is certified on the current O/S or not.
Expected result: One of oracle-6,oracle-5.6,enterprise-5.4,enterprise-4,enterprise-5,redhat-5.4,redhat-4,redhat-5,SuSE-10,SuSE-11
Actual Result: oracle-5.6
Check complete. The overall result of this check is: Passed
Check Name:Packages
Check Description:This is a prerequisite condition to test whether the packages recommended for installing the product are available on the system.
Checking for binutils-2.17.50.0.6; found binutils-2.17.50.0.6-20.el5_8.3-x86_64.Passed
Checking for compat-libstdc++-33-3.2.3-x86_64; found compat-libstdc++-33-3.2.3-61-x86_64. Passed
Checking for compat-libstdc++-33-3.2.3-i386; found compat-libstdc++-33-3.2.3-61-i386. Passed
Checking for elfutils-libelf-0.125; found elfutils-libelf-0.137-3.el5-x86_64. Passed
Checking for elfutils-libelf-devel-0.125; found elfutils-libelf-devel-0.137-3.el5-x86_64. Passed
Checking for gcc-4.1.1; found gcc-4.1.2-54.el5-x86_64. Passed
Checking for gcc-c++-4.1.1; found gcc-c++-4.1.2-54.el5-x86_64. Passed
Checking for glibc-2.5-12-x86_64; found glibc-2.5-107-x86_64. Passed
Checking for glibc-2.5-12-i686; found glibc-2.5-107-i686. Passed
Checking for glibc-common-2.5; found glibc-common-2.5-107-x86_64. Passed
Checking for glibc-devel-2.5-x86_64; found glibc-devel-2.5-107-x86_64. Passed
Checking for glibc-devel-2.5-12-i386; found glibc-devel-2.5-107-i386. Passed
Checking for libaio-0.3.106-x86_64; found libaio-0.3.106-5-x86_64. Passed
Checking for libaio-0.3.106-i386; found libaio-0.3.106-5-i386. Passed
Checking for libaio-devel-0.3.106; found libaio-devel-0.3.106-5-x86_64. Passed
Checking for libgcc-4.1.1-x86_64; found libgcc-4.1.2-54.el5-x86_64. Passed
Checking for libgcc-4.1.1-i386; found libgcc-4.1.2-54.el5-i386. Passed
Checking for libstdc++-4.1.1-x86_64; found libstdc++-4.1.2-54.el5-x86_64. Passed
Checking for libstdc++-4.1.1-i386; found libstdc++-4.1.2-54.el5-i386. Passed
Checking for libstdc++-devel-4.1.1; found libstdc++-devel-4.1.2-54.el5-x86_64. Passed
Checking for make-3.81; found make-1:3.81-3.el5-x86_64. Passed
Checking for sysstat-7.0.0; found sysstat-7.0.2-12.0.1.el5-x86_64. Passed
Check complete. The overall result of this check is: Passed
Check Name:Kernel
Check Description:This is a prerequisite condition to test whether the minimum required kernel parameters are configured.
Checking for VERSION=2.6.18; found VERSION=2.6.32-300.39.5.el5uek. Passed
Checking for hardnofiles=4096; found hardnofiles=131072. Passed
Checking for softnofiles=4096; found softnofiles=131072. Passed
Check complete. The overall result of this check is: Passed
Check Name:GLIBC
Check Description:This is a prerequisite condition to check whether the recommended glibc version is available on the system
Expected result: ATLEAST=2.5-12
Actual Result: 2.5-107
Check complete. The overall result of this check is: Passed
Check Name:TotalMemory
Check Description:This is a prerequisite condition to test whether the system has sufficient physical memory.
Expected result: 1024MB
Actual Result: 5992MB
Check complete. The overall result of this check is: Passed
Check Name:Check Env Variable
Check Description:Check for LD_ASSUME_KERNEL
Expected result: LD_ASSUME_KERNEL environment variable should not be set in the environment.
Actual Result: Variable Not set.
Check complete. The overall result of this check is: Passed
Setting current page standalone validations to true
Setting current page standalone validations to true
In processErrorMsgStringDomain Name
In processErrorMsgStringValid domain name may only contain alphanumeric characters, or the underscore (_) or hyphen (-) characters, and include at least one alphanumeric character.
In processErrorMsgStringAdministrator Password
In processErrorMsgStringValid passwords are 8 to 30 characters long, must begin with an alphabetic character,use only alphanumeric, underscore (_), dollar ($) or pound (#) characters and include at least one number.
In processErrorMsgStringAdministrator User Name
In processErrorMsgStringThe value may only contain alphanumeric characters, or the underscore (_) or hyphen (-) characters.
resultset.getStatus() : true
Setting current page standalone validations to true
XXX: setting m_WLSHome to: /u00/wls/wlserver_10.3
In processErrorMsgStringDomain Home
In processErrorMsgStringOracle Instance
In processErrorMsgStringMiddleware Home
In processErrorMsgStringInstance Name
In [email protected]_invalidCharMsgString
Obtained the single page data..SpecifyHomeInformationPage
In processErrorMsgStringWebLogic Server Home
In processErrorMsgStringOracle Home
In processErrorMsgStringOracle Home Directory
In [email protected]_OracleDirectoryInvalidErrorString
Obtained the single page data..SpecifyHomeInformationPage
Entering the exec handler method in get free space for home...
quotaNeededProperty:null
isQuotaNeeded : false
Entering getUnixVolumeFreeSpace false
In get free space method..
not required...
Entering getUnixVolumeFreeSpace false
In get free space method..
not required...
resultset.getStatus() : true
XXX: setting m_WLSHome to: /u00/wls/wlserver_10.3
Setting current page standalone validations to true
OS: <LINUX> commad: </sbin/ifconfig -a> pattern: <inet(\s+.*:)?\s*\d+\.\d+\.\d+\.\d+>
resultset.getStatus() : true
Setting current page standalone validations to true
In processFieldStringBIPLATFORM schema user name
In processFieldStringBIPLATFORM schema user password
In processFieldStringConnect string
resultset.getStatus() : true
Setting current page standalone validations to true
In processFieldStringMDS schema user name
In processFieldStringMDS schema user password
In processFieldStringConnect string
resultset.getStatus() : false
Setting current page standalone validations to true
In processFieldStringMDS schema user name
In processFieldStringMDS schema user password
In processFieldStringConnect string
resultset.getStatus() : true
Setting current page standalone validations to true
resultset.getStatus() : true
Setting current page standalone validations to true
resultset.getStatus() : true
Setting collector hub url in screen:null
In doFinish method checking for inventory lock...InstallProgressPage
Next page is a progress page and the inventory lock is false
Setting current page standalone validations to true
Exception in thread "AWT-EventQueue-0" java.lang.StringIndexOutOfBoundsException: String index out of range: -2
Adding /tmp/OraInstall2013-04-03_12-13-01PM for deletion.
Adding to classpath:file:/tmp/OraInstall2013-04-03_12-13-01PM/ext/jlib/bi.jar
Adding to classpath:file:/tmp/OraInstall2013-04-03_12-13-01PM/ext/jlib/template.jar
null
configFileName:/tmp/OraInstall2013-04-03_12-13-01PM/ext/jlib/footprint.xml
location of staticportsini =/home/oracle/staticports.ini
location of staticportsini =/home/oracle/staticports.ini
location of staticportsini =/home/oracle/staticports.ini
location of staticportsini =/home/oracle/staticports.ini
Setting current page standalone validations to true
Setting current page standalone validations to true
Setting current page standalone validations to true
Inside startPreReqOperation...prereq
contextFile:/tmp/OraInstall2013-04-03_12-13-01PM/prereq/oui/agent_prereq_context.xml
The entry point is: oracle.installType.all
Check Name:CertifiedVersions
Check Description:This is a prerequisite condition to test whether the Oracle software is certified on the current O/S or not.
Expected result: One of oracle-6,oracle-5.6,enterprise-5.4,enterprise-4,enterprise-5,redhat-5.4,redhat-4,redhat-5,SuSE-10,SuSE-11
Actual Result: oracle-5.6
Check complete. The overall result of this check is: Passed
Check Name:Packages
Check Description:This is a prerequisite condition to test whether the packages recommended for installing the product are available on the system.
Checking for binutils-2.17.50.0.6; found binutils-2.17.50.0.6-20.el5_8.3-x86_64.Passed
Checking for compat-libstdc++-33-3.2.3-x86_64; found compat-libstdc++-33-3.2.3-61-x86_64. Passed
Checking for compat-libstdc++-33-3.2.3-i386; found compat-libstdc++-33-3.2.3-61-i386. Passed
Checking for elfutils-libelf-0.125; found elfutils-libelf-0.137-3.el5-x86_64. Passed
Checking for elfutils-libelf-devel-0.125; found elfutils-libelf-devel-0.137-3.el5-x86_64. Passed
Checking for gcc-4.1.1; found gcc-4.1.2-54.el5-x86_64. Passed
Checking for gcc-c++-4.1.1; found gcc-c++-4.1.2-54.el5-x86_64. Passed
Checking for glibc-2.5-12-x86_64; found glibc-2.5-107-x86_64. Passed
Checking for glibc-2.5-12-i686; found glibc-2.5-107-i686. Passed
Checking for glibc-common-2.5; found glibc-common-2.5-107-x86_64. Passed
Checking for glibc-devel-2.5-x86_64; found glibc-devel-2.5-107-x86_64. Passed
Checking for glibc-devel-2.5-12-i386; found glibc-devel-2.5-107-i386. Passed
Checking for libaio-0.3.106-x86_64; found libaio-0.3.106-5-x86_64. Passed
Checking for libaio-0.3.106-i386; found libaio-0.3.106-5-i386. Passed
Checking for libaio-devel-0.3.106; found libaio-devel-0.3.106-5-x86_64. Passed
Checking for libgcc-4.1.1-x86_64; found libgcc-4.1.2-54.el5-x86_64. Passed
Checking for libgcc-4.1.1-i386; found libgcc-4.1.2-54.el5-i386. Passed
Checking for libstdc++-4.1.1-x86_64; found libstdc++-4.1.2-54.el5-x86_64. Passed
Checking for libstdc++-4.1.1-i386; found libstdc++-4.1.2-54.el5-i386. Passed
Checking for libstdc++-devel-4.1.1; found libstdc++-devel-4.1.2-54.el5-x86_64. Passed
Checking for make-3.81; found make-1:3.81-3.el5-x86_64. Passed
Checking for sysstat-7.0.0; found sysstat-7.0.2-12.0.1.el5-x86_64. Passed
Check complete. The overall result of this check is: Passed
Check Name:Kernel
Check Description:This is a prerequisite condition to test whether the minimum required kernel parameters are configured.
Checking for VERSION=2.6.18; found VERSION=2.6.32-300.39.5.el5uek. Passed
Checking for hardnofiles=4096; found hardnofiles=131072. Passed
Checking for softnofiles=4096; found softnofiles=131072. Passed
Check complete. The overall result of this check is: Passed
Check Name:GLIBC
Check Description:This is a prerequisite condition to check whether the recommended glibc version is available on the system
Expected result: ATLEAST=2.5-12
Actual Result: 2.5-107
Check complete. The overall result of this check is: Passed
Check Name:TotalMemory
Check Description:This is a prerequisite condition to test whether the system has sufficient physical memory.
Expected result: 1024MB
Actual Result: 5992MB
Check complete. The overall result of this check is: Passed
Check Name:Check Env Variable
Check Description:Check for LD_ASSUME_KERNEL
Expected result: LD_ASSUME_KERNEL environment variable should not be set in the environment.
Actual Result: Variable Not set.
Check complete. The overall result of this check is: Passed
Setting current page standalone validations to true
Setting current page standalone validations to true
In processErrorMsgStringDomain Name
In processErrorMsgStringValid domain name may only contain alphanumeric characters, or the underscore (_) or hyphen (-) characters, and include at least one alphanumeric character.
In processErrorMsgStringAdministrator Password
In processErrorMsgStringValid passwords are 8 to 30 characters long, must begin with an alphabetic character,use only alphanumeric, underscore (_), dollar ($) or pound (#) characters and include at least one number.
In processErrorMsgStringAdministrator User Name
In processErrorMsgStringThe value may only contain alphanumeric characters, or the underscore (_) or hyphen (-) characters.
resultset.getStatus() : true
Setting current page standalone validations to true
XXX: setting m_WLSHome to: /u00/wls/wlserver_10.3
In processErrorMsgStringDomain Home
In processErrorMsgStringOracle Instance
In processErrorMsgStringMiddleware Home
In processErrorMsgStringInstance Name
In [email protected]_invalidCharMsgString
Obtained the single page data..SpecifyHomeInformationPage
In processErrorMsgStringWebLogic Server Home
In processErrorMsgStringOracle Home
In processErrorMsgStringOracle Home Directory
In [email protected]_OracleDirectoryInvalidErrorString
Obtained the single page data..SpecifyHomeInformationPage
Entering the exec handler method in get free space for home...
quotaNeededProperty:null
isQuotaNeeded : false
Entering getUnixVolumeFreeSpace false
In get free space method..
not required...
Entering getUnixVolumeFreeSpace false
In get free space method..
not required...
resultset.getStatus() : true
XXX: setting m_WLSHome to: /u00/wls/wlserver_10.3
Setting current page standalone validations to true
OS: <LINUX> commad: </sbin/ifconfig -a> pattern: <inet(\s+.*:)?\s*\d+\.\d+\.\d+\.\d+>
resultset.getStatus() : true
Setting current page standalone validations to true
In processFieldStringBIPLATFORM schema user name
In processFieldStringBIPLATFORM schema user password
In processFieldStringConnect string
resultset.getStatus() : true
Setting current page standalone validations to true
In processFieldStringMDS schema user name
In processFieldStringMDS schema user password
In processFieldStringConnect string
resultset.getStatus() : false
Setting current page standalone validations to true
In processFieldStringMDS schema user name
In processFieldStringMDS schema user password
In processFieldStringConnect string
resultset.getStatus() : true
Setting current page standalone validations to true
resultset.getStatus() : true
Setting current page standalone validations to true
resultset.getStatus() : true
Setting collector hub url in screen:null
In doFinish method checking for inventory lock...InstallProgressPage
Next page is a progress page and the inventory lock is false
Setting current page standalone validations to true
Exception in thread "AWT-EventQueue-0" java.lang.StringIndexOutOfBoundsException: String index out of range: -2
at java.lang.String.substring(String.java:1937)
at oracle.as.install.bi.util.InstallerInfo.getShiphomeLocation(InstallerInfo.java:58)
at oracle.as.install.bi.installaction.BIInstallAction.executeBeforeCopy(BIInstallAction.java:230)
at oracle.as.install.engine.modules.util.installaction.InstallActionProviderUtility.invokeExecuteBeforeCopy(InstallActionProviderUtility.java:72)
at oracle.as.install.engine.modules.presentation.ui.common.wizard.ModifiedDWizard.startInstallOperation(ModifiedDWizard.java:3117)
at oracle.as.install.engine.modules.presentation.ui.common.wizard.ModifiedDWizard.doNext(ModifiedDWizard.java:788)
at oracle.as.install.engine.modules.presentation.ui.common.wizard.ModifiedDWizard.doNext(ModifiedDWizard.java:886)
at oracle.as.install.engine.modules.presentation.ui.common.wizard.ModifiedDWizard.doNext(ModifiedDWizard.java:934)
at oracle.as.install.engine.modules.presentation.ui.common.wizard.ModifiedDWizard.doFinish(ModifiedDWizard.java:611)
at oracle.bali.ewt.wizard.BaseWizard$Action.actionPerformed(Unknown Source)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
at java.awt.Component.processMouseEvent(Component.java:6288)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
at java.awt.Component.processEvent(Component.java:6053)
at java.awt.Container.processEvent(Container.java:2041)
at java.awt.Component.dispatchEventImpl(Component.java:4651)
at java.awt.Container.dispatchEventImpl(Container.java:2099)
at java.awt.Component.dispatchEvent(Component.java:4481)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
at java.awt.Container.dispatchEventImpl(Container.java:2085)
at java.awt.Window.dispatchEventImpl(Window.java:2478)
at java.awt.Component.dispatchEvent(Component.java:4481)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:643)
at java.awt.EventQueue.access$000(EventQueue.java:84)
at java.awt.EventQueue$1.run(EventQueue.java:602)
at java.awt.EventQueue$1.run(EventQueue.java:600)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
at java.awt.EventQueue$2.run(EventQueue.java:616)
at java.awt.EventQueue$2.run(EventQueue.java:614)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:613)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
So far, I have confirmed I am using a 64-bit compliant java:
$> java -version:
java version "1.6.0_43"
Java(TM) SE Runtime Environment (build 1.6.0_43-b01)
Java HotSpot(TM) 64-Bit Server VM (build 20.14-b01, mixed mode)
There is nothing installed in this box except the Linux OS, one single Oracle DB for me to install OBIEE, no WebLogic, nothing else.
Any help will be appreciated!
Thanks,
NickWell, I redownloaded all five zip files for Linux 64 bit, and completely deleted my old bishiphome.
I then unzipped all five zip files into a brand new bishiphome, and retried the installation. This is still a Linux box with nothing on it but Linux, one Oracle 11gR2 database, rcu11.1.1.6, and attempting to install OBIEE 11.1.1.6.
Same result.
Still hangs at file copy, still has the same error message in the .out file.
Exception in thread "AWT-EventQueue-0" java.lang.StringIndexOutOfBoundsException: String index out of range: -2
at java.lang.String.substring(String.java:1937)
Any other ideas? This is getting really frustrating! -
HOW TO INSTALL ODI 11g / OWB 11g IN WINDOWS SERVER 2008 R2 (64 BITS)
Hi everybody,
I have a serious problem.
Last week we buy a new server with Windows Server 2008 Std. R2 x64, for a new project. I tried to install the RDBMS Oracle 11g R2 (x64) without problems, but when i try execute the "Design Center" contents in OWB, show me the error: 0xc0000018
Then, I´m thinking in install Oracle Data Integrator to solution it, but i`ve read that neither can install on 64 bits system... This is true?
Somebdoy knows how can I install OWB 11g / ODI 11g in a Windows 2008 Server 64 bits?
Thanks & Regards!OWB 11G Will have been installed with the database, it now ships with 11G.
Check you are on a supported platform for design centre using the certification matrix.
Quick google search for you regards 0xc0000018 :
Problem in Lunching OWB Design Center -
Upgrade from 10G windows 32-bit to 11G linux 64-bit
Hi,
I am moving a 10g database on windows 32-bit environment to 11G linux 64-bit environment. I am using rman to restore the database on the new environment. The restore completes successfully after which when I open the database in upgrade mode and run utlirp.sql in order to migrate it from 32-bit to 64-bit I encounter the following error:
create or replace package STANDARD AUTHID CURRENT_USER is -- careful on this line; SED edit occurs!
/********** Types and subtypes, do not reorder **********/
type BOOLEAN is (FALSE, TRUE);
type DATE is DATE_BASE;
type NUMBER is NUMBER_BASE;
subtype FLOAT is NUMBER; -- NUMBER(126)
-- to your own code as it may in future interfere with the package
-- consistency maintenance mechanisms and could have dire results.
--#### timestamp pragma (please keep this last)
pragma TIMESTAMP('2006-04-18:00:00:00');
end;
create or replace
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-00942: table or view does not exist
Thanks in advance for your help.According to
ID 757245.1 Can you Upgrade RDBMS and Convert From 32-bit to 64-bit Binaries Directly on Linux or Windows based Intel Platforms Using the Database Upgrade Assistant (DBUA)oracle does not support upgrading and changing the wordsize at the same time. A workaround is to upgrade it on the same platform and then move it to the new oS and change wordisize.
Ioan
Edited by: ioan on 15.1.2010 3:32 -
Hi,
Does anyone know how do I connect from Oracle 11g 11.1.0.7 on LINUX 64-bit machines to SQL Server 2000 DB please so I can set up a regular data extraction job to migrate data? Does this use products I am already licenced for under Oracle Enterprise Edition?
Thanks,
Jeremyyou must be not read it carefully.
The gateway software is there, in the bottom.
Oracle Database Gateways 11g Release 1 (11.1.0.6.0)
for Linux x86-64
linux.x64_11gR1_gateways.zip (505,401,641 bytes) (cksum - 2593459988) just download it.
and this is how to install and configure
http://download.oracle.com/docs/cd/B28359_01/gateways.111/b31042/partsql.htm#BJEGEBFH -
Is owb 11g r2,supported by 64 bit windows 2008 server
is owb 11g ,r2 supported on 64 bit windows 2008 server.
is it true that : OWB 11g,r2 is supported only for 32 bit windows 2008.There is no 64b client for windows at this time. You can check on Oracle for available downloads.
http://www.oracle.com/technetwork/developer-tools/warehouse/downloads/software/index.html -
OWB 11g Problem in running Process flow
I’ve build a process flow as described in “Getting Started with Oracle Warehouse Builder 11g”. But if I run the process flow I get a warning message “You have to deploy this object before running” followed by the error RTC-5170: The selected objects do not require deployment as they are all up to date in the Control Center.
Therefore I’m not able to run the process flow. What’s wrong? It looks so easy in Getting Started but it doesn’t work.
I’ve found two threads regarding this error from last year in this forum. But there is no solution for OWB 11g.
Has anyone an advice for me?I've successfully installed OWF as described in Installation guide (all components are on the sam server).
But when I deploy a workflow in OWB I get some errors. In the job details
I find ORA-00942 and RPE-02053. It seems that the workflow repository is missing.
Are there additional steps for creating a workflow repository?
Or what is wrong? All installation logs (wf.log and workflow.log) are without errors and with success messages.
Any idea?
Maybe you are looking for
-
Just wondering if turning of the camera roll iCloud backup on my phone will affect any photos on my iPhoto on my MacBook? Thanks in advance
-
Video playback and Album covers in Cover album flow mode are a mess
After installing iTunes 7.02 the cover albums come through on albums with song group list, but in the Cover Flow mode where you browse through the album covers, the covers are made up of verticle and horizontal lines and nothing can be made out. Even
-
Cannot use ORDER BY in cursors - why not?
When defining af cursor in a stored procedure, Oracle 8.1.7 wont let me add an ORDER BY clause. I have tried on two installations with the same result. I then asked a peer why, but he demonstrated that it was perfectly alright on his installation of
-
How to allow a Java application to run on any PC without installing jdk?
I'm doing this program that would retrieve infomation of the PC and send it to the server. In order to do that, i have to email the application to all these PCs. The problem is that some of these PCs may not have JRE or jdk to run the application. Co
-
I want to print multiple pictures on 81/2 x 11 sheet of paper
How do I print multiple pictures on an 81/2 x 11 sheetof paper?