OWB-Import does not distinguish between nls_length_semantics char and byte.

We have a 10g-DB with UTF8 charset and nls_length_semantics=char and we've created an OWB warehouse module for 10g with several tables in it. After deploy operation for a table the column length attributs are looking nice. But if we re-import this table the varchar fields have the threefold length!
This makes life hard for us, because sometimes it's necessary to reconcile discrepancies in development cycle and some tables have about 150 columns.
Does anybody have suggestions?
The OWB version is 10.1.0.3.0.
Regards
Ralf

Ralf,
Oracle stores the length of VARCHAR columns in two ways in its metadata. One is the length as required by the application, and the other is the length required to store UTF data.
One UTF character can take upto 3 characters of storage. When OWB reads in the definition from data dictionary, it uses the actual characters allocated to the column, and thus u see a three fold increase in VARCHAR columns.
Try this for your table
select
column_name, data_length, char_length
from
user_tab_columns
where
table_name='nameOfTable'
And that is how Oracle designed the database, but unfortunately OWB does not have that twin way of seeing things.
- Jojo

Similar Messages

VO does not distinguish between subscript or superscript text

I find it strange that VocieOver in Mac OS X (10.5.8) does not distinguish between subscript and superscript. Subscript and superscript hold a lot of meaning and was wondering if there was maybe a setting somewhere that enabled subscript and superscript text to be easily identified.
Thanks

Hello, man with the spoof hobbitname,
Try doing it the other way around: put your legacy instruments in the main folder, after you've removed the new ones with the same names - including their samples folders.
*Like so:*
+(the folders are empty - I don't actually have them)+
It should work this way...
regards, Erik.

Synchro does not work between Ipad, Iphone and Mac

Good evening,
I have an IMAC, iPhone 5s and an Ipad all with the last IOS version and synchro does not work at all.
My iCloud address is not with iCloud but with hotmail.
I dod not get any suitable answer from the retailers in Budapest.
Does anybody have an idea? Thank you.
Greg

good evening!
i switch on in iCloud the calendars on both Iphone and Ipad/mac of course but nothing happened.
Can it be because my iCloud address is with hotmail?

WebPart Connection does not work between DataForm-WebPart and ListView-WebPart

Hi Experts,
how to reproduce:
Create a new EditForm.aspx (i called mine just Edit.aspx) from a typical custom list and set this one as Default.
Browse to that page and Start Edit
Add a WebPart from one of your custom lists.
Add a WebPart-Connection from the DataForm-WebPart to the newly created ListView-WebPart.
Therfore send the DataRow from the DataForm-WebPart to the ListView-WebPart and set appropiate Filter-Settings.
Save the page and Browse again.
The data is not correctly filtered. I expected to see just those entries in my ListView-WebPart which reflecting my Setting but i see more rows and some expected rows are not even there.
Is there some Workaround available until a fix will come?
With Kind Regards, Ronny

Hi Ronny,
Were your two columns used to connection the same type column?
Please try using the "Connections->Get the Filter values from" to get the value from another data view web part column, then select the list item see if the second web part will show the filtered itmes, I have tested this connection filter
before and it worked for me.
http://sarahlhaase.wordpress.com/2012/05/21/connecting-web-parts-with-a-selector-and-a-detail-pane-sharepoint-2010-version/
Thanks
Daniel Yang
TechNet Community Support

SSL does not work between OS 390 and windows.

I am repeatedly getting the following error.
handshake_failure (no cipher suites in common)
This happens only between MVS and other platforms.
I believe it is because of the different character encodings between the two. Can somebody suggest me a solution to this?
Please help...
Regards,
Mohan

Hi Mohan,
When you have DSA-based certificates you may face this type of error "no cipher suites in common".
As by default certificates created with keytool use DSA public keys. To interact with IE or Navigator, you should create certificates that use RSA-based keys. TO do this you need to specify the -leyalg RSA option when using keytool. For example:
keytool -genkey -alias duke -keystore testkeys -keyalg rsa
Hope this will help you.
Regards,
Anil.
Technical Support Engineer.

The INSERT button does not toggle between inserting text and overwriting text, but just stays in insert. Is there a way to switch to overwriting text?

I am using Firefox to fill in forms in our library cataloging system, InMagic Genie. With IE, I can toggle back and forth from insert to overwriting text with the INSERT button, but it has no effect in Firefox.

Firefox doesn't support overwrite and is always in insert mode.

Sent mail does not sync between devices

My sent mail does not sync between devices. For example, if I send an email from my Iphone it does not show in my sent box on the MAC mail (postage stamp). If I send mail from MAC mail it does not show on my phone. But if I go to Yahoo (mail) I can see all sent mail.
What am I doing wrong? Is there a setting that allows them to snch sent mail??

From reports on this site, Yahoo mail doesn't work reliably with Mail. The following steps may help.
Quit Mail. Force quit if necessary.
Back up all data. That means you know you can restore the Mail database, no matter what happens.
Triple-click the line below on this page to select it:
~/Library/Mail/V2/MailData/Envelope Index
Copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder
from the menu bar. Paste into the box that opens (command-V), then press return.
A Finder window will open with a file selected. Move the selected file to the Desktop, leaving the window open. Other files in the folder may have names that begin with "Envelope Index". Move those files, if any, to the Trash.
Log out and log back in. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is corrupt and that Mail has to quit. Click OK.
Test. If Mail now works as expected, you can delete the file you moved to the Desktop. Otherwise, post your results.

ARQ: Role Import does not show roles in the preview

Dear All,
Recently I upgraded our system to SP#14. Now when I try to import roles from NWBC->AM->Role Mass Maintenance->Role Import, it does not show roles in preview. Also, it does not import the roles specified. (either a range or full name of the role). It does not even give any error message.
I implemented SAP note#1897975 Role import does not show roles in the preview.
Still facing the same problem. Has any one faced this problem? Please suggest.
Regards,
Faisal

HI Faisal,
This note(1897975) you have to implement in Plug-in System, try to check the same once and let me know if it resolves our issue.
Regards,
Neeraj Agarwal

Mouse pointer does not move between monitors

my mouse pointer does not move between displays all of a sudden !

ok, I am using magic mouse, mac mini with two displays,
was working fine, but now when I started the computer recently it does not want to move the mouse to the other screen.
the other screen is open but it is not possible to move anything over to it !!
tried to restart reset the display settings etc. but no luck !!

Importer does not recognize already imported photos

Hello,
I have a really annoying problem with Aperture 3.0.3. The importer does not recognize already imported photos and wants to import them again and again. This is true for photos from my iPhoneand also for photos from my Nikon. If I enable "Do not import duplicates" then some photos vanish from the importer, when I the iPhone view is open. In the Nikon view not even one photo is recognized as already imported.
Also very strange is that when I have the iPhone (iOS 4.1 installed) attached to the Mac, Aperture opens the importer automatically and shows all photos correctly - but strangely, both iMac CPUs are at 100% until I click either "Cancel" or "Start import" or I disconnect the iPhone.
I tried the following without success:
- Correct permissions on media library
- Repair media library
- Rebuild media library
Imports from my iPhone last very long and seem to hang most of the time. I have to kill Aperture to make it work again all the time.
To me, it looks like there is something really messed up at the base of this program.
I have about 20000 files in my library - face recognition is not turned off - most of the preferences are at their default, I think. Did not play around very much.
Does anybody know what to do? I don't want to lose all my Projects (sorted all pictures into their own projects). But I want to work with Aperture again. When its working, it's a great tool.
Regards
Alex

I've had the same problem. For some things, like videos and photos on my iPhone, I've found as many as 5 copies of the images despite keeping the 'do not import duplicates' checked.
I've also found a bug with the import function, where if I'm importing from folders on my hard drive, sometimes it finds no images at all (even if they don't exist in my library). Simply cancelling and going back into import and the miraculously appear (including images that have already been imported despite having 'do not import duplicates' checked.).
I've been going through my library deleting all the duplicates, and managed to free about 10GB of space.
Having moved from Lightroom the 'technical side' of Aperture seems very antiquated. For example, if I remove a duplicate video - then try clicking on that video in Aperture, it literally takes about 10-15 minutes of spinning disc before Aperture becomes responsive. It also often hangs up on the 'updating previews' when I quit.
Such a shame aperture is so bad. I really like the functionality - eg. having my photos automatically sync with my Apple TV, but it seems to be absolutely full of bugs.

TS3367 Hi, the FaceTime just did not work between my mom and I. It used to work weeks ago, but now it does not work after showing"connecting". I feel frustrated and try all the method I can think of. Still do not work. Hope u can help me. Thanks!

Hi, the FaceTime just did not work between my mom and I. It used to work weeks ago, but now it does not work after showing"connecting". I feel frustrated and try all the method I can think of. Still do not work. Hope u can help me. Thanks!

Was it just this one time? Could be that you, or your mom, were experiencing network problems. Try again at a later time.

My photos "favorites" folder does not sync between devices

my photos "favorites" folder does not sync between devices

Hi
Try Settings> Itunes & App Stores> Automatic Downloads - Turn on Music and Apps
http://www.apple.com/itunes/inside-itunes/2012/04/automatically-download-your-bo ok-music-and-app-purchases-to-the-devices-you-choose.html
This is how iPhone 4 works running on IOS 6.0.1...I'm less familar with iPAD 2
Cheers

TS1496 This is a new computer. I set up a new account. I want to start importing my CD's to my account, but when I click on Music the Import does not appear.

This is a new computer. I set up a new account. When I click on Music, Import does not appear to allow me to add my CD's

Hi,
See if these Links for Home Sharing add any light to the problem
Understanding
http://support.apple.com/kb/HT3819
Troubleshooting
http://support.apple.com/kb/TS2972
How to
http://support.apple.com/kb/HT2688

Import does not see photos

Very strange. Last night I imported as usual a folder full of raw files, and only 100 photos out of 147 imported. I then tried to imports the remaining ones, but import does not see them at all. Actually now import does not see any files, even from folders which I previously successfully imported. If I drag the photos from the folder into a project it imports the photos fine, but the names are not changed, which is a big problem. It does not work when I try to drag the full folder full of photos. How come I can't import any more? I restarted the computer but import still does not see any photos.
Message was edited by: Pufichek

Oh my God, how stupid of me. You are absolutely right, I had the "Do not import duplicates" ticked. I must have clicked it by error.
Now I'm not sure why the first time only 100 photos were imported, but it's not important. I'll report next time if I have the same problem importing a large folder.
Thank you so much!

OSX 10.6 does not differentiate between PS or illustrator .eps files

Have other people encountered this problem?
I have found that snow leopard does not differentiate between photoshop and illustrator .eps files in order to double click and open them.
Does anyone know how to correct this?

Hello Chris,
Thanks so much for clarifying about OSX 10.6 opening .eps files in illustrator or photoshop.
I was wondering if you knew out how
to create a droplet that opens multiple PDFs and saves as .gifs.
When I
try to do it, all of the .gifs end up having the same name as the file
that I created the script with, and a "-1" at the end.
Actually
there are two droplets that I want to create (to be able to
drop multiple pdf files):
Portrait/Square
script:
Final thumbnail file to be 51 pixels wide by (x?) pixels
tall
Final thumbnail file should be 72 dpi,
Final
thumbnail file should be flattened(no transparency in white areas),
Final thumbnail file should have a 1 pixel wide Grey border to all
sides
Final thumbnail file should be saved as a GIF file, RGB
Landscape script:
Final thumbnail file to be 65 pixels wide by (x?)
pixels tall
Final thumbnail file should be 72 dpi,
Final
thumbnail file should be flattened(no transparency in white areas),
Final thumbnail file should have a 1 pixel wide Grey border to all
sides
Final thumbnail file should be saved as a GIF file, RGB
Thanks,
Matthew
Date: Wed, 14 Apr 2010 14:48:11 -0600
From: [email protected]
To: [email protected]
Subject: OSX 10.6 does not differentiate between PS or illustrator .eps files
Given EPS files are "really" Illustrator files (Photoshop not being a
vector application), you probably want to make Illustrator the default.
No.
EPS files can be produced and read by many applications.
And most EPS files cannot be read by Illustrator.
Frequently EPS files in particular need to be edited in the application which created them (Freehand vs. AI vs. Quark gradients anyone?).
>

OWB-Import does not distinguish between nls_length_semantics char and byte.

Similar Messages

Maybe you are looking for