OWB use unwanted RTRIM in generated row based code

Hi everybody,
In a pretty straightforward mapping with simple DELETE and then INSERT OWB generate row based code. This would not bother me too much but in INSERT statement OWB use TRIM for all character columns immediately converting fields with spaces into NULL which I badly need to avoid. Does anybody know if this is OWB feature or is it configurable and can be avoided?
I would appreciate any suggestions,
Alex

There are more than one way you can do this. Put it in the pre-mapping process, as described by you, use an expression, use a trasformation or use a temporary table to store constant values calculated on the fly. It all depends on what exacltly you want to do and on your environment details.
Regards:
Igor

Similar Messages

Error while generating java client code from wsdl file

I am trying to generate a java client code from WSDL file um_workflowSaveCreateProfile.wsdl which includes um_workflowSaveCreateProfile_interface.wsdl file, so I am keeping both the files in the same folder and trying to generate the client code but it is showing me the below error highlighted .
um_workflowSaveCreateProfile.wsdl
<definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:xsd="E:/DIPPWF/XMLSchema" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:oblix="http://www.oblix.com/" xmlns:obinterface="http://www.oblix.com/wsdl/um_workflowSaveCreateProfile_interface" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://www.oblix.com/wsdl/um_workflowSaveCreateProfile" targetNamespace="http://www.oblix.com/wsdl/um_workflowSaveCreateProfile">
     <import namespace="D:/DIPP/WSDL/um_workflowSaveCreateProfile_interface" location="um_workflowSaveCreateProfile_interface.wsdl"/>
     <service name="OblixIDXML_um_workflowSaveCreateProfile_Service">
          <port name="OblixIDXML_um_workflowSaveCreateProfile_Port" binding="obinterface:OblixIDXML_um_workflowSaveCreateProfile_Binding">
               <soap:address location="http://localhost:7777/identity/oblix/apps/userservcenter/bin/userservcenter.cgi"/>
          </port>
     </service>
</definitions>
um_workflowSaveCreateProfile_interface.wsdl
<definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:oblix="http://www.oblix.com/" xmlns:oblixxmllocalschema="http://www.oblix.com/OblixXMLLocalSchema" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://www.oblix.com/wsdl/um_workflowSaveCreateProfile_interface" targetNamespace="http://www.oblix.com/wsdl/um_workflowSaveCreateProfile_interface">
     <types>
          <xsd:schema targetNamespace="http://www.oblix.com/" elementFormDefault="qualified"
               xmlns="http://www.oblix.com/"
               xmlns:xsd="http://www.w3.org/2001/XMLSchema">
                    <xsd:include schemaLocation="../XMLSchema/common_parameters.xsd" />
                    <xsd:include schemaLocation="../XMLSchema/common_authentication.xsd" />
                    <xsd:include schemaLocation="../XMLSchema/workflowSaveCreateProfile.xsd" />
          </xsd:schema>
          <xsd:schema targetNamespace="http://www.oblix.com/OblixXMLLocalSchema" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
               <xsd:element name="request">
                    <xsd:complexType>
                         <xsd:sequence>
                              <xsd:element name="params">
                                   <xsd:complexType>
                                        <xsd:sequence>
                                             <xsd:element ref="oblix:ObWorkflowName"/>
                                             <xsd:element ref="oblix:ObDomainName"/>
                                             <xsd:element ref="oblix:ObWfComment" minOccurs="0"/>
                                             <xsd:element ref="oblix:noOfFields"/>
                                             <xsd:element ref="oblix:AttributeParams"/>
                                        </xsd:sequence>
                                   </xsd:complexType>
                              </xsd:element>
                         </xsd:sequence>
                         <xsd:attribute name="version" type="xsd:string" use="optional"/>
                         <xsd:attribute name="application" type="xsd:string" use="required" />
                         <xsd:attribute name="function" type="xsd:string" use="required" />
                         <xsd:attribute name="mode" type="xsd:string" use="optional"/>
                    </xsd:complexType>
               </xsd:element>
          </xsd:schema>
     </types>
     <message name="OblixIDXMLInput">
          <part name="authentication" element="oblix:authentication"/>
          <part name="request" element="oblixxmllocalschema:request"/>
     </message>
     <message name="OblixIDXMLOutput">
          <part name="body" element="oblix:Oblix"/>
     </message>
     <portType name="OblixIDXMLPortType">
          <operation name="OblixIDXML_um_workflowSaveCreateProfile">
               <input message="tns:OblixIDXMLInput"/>
               <output message="tns:OblixIDXMLOutput"/>
          </operation>
     </portType>
     <binding name="OblixIDXML_um_workflowSaveCreateProfile_Binding" type="tns:OblixIDXMLPortType">
          <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
          <operation name="OblixIDXML_um_workflowSaveCreateProfile">
               <soap:operation soapAction="http://www.oblix.com/"/>
               <input>
                    <soap:body use="literal"/>
               </input>
               <output>
                    <soap:body use="literal"/>
               </output>
          </operation>
     </binding>
</definitions>
I am using WSDL2 Java for generating the client code .
Please suggest where am I wrong .
E:\axis2-1.4\bin>WSDL2Java -uri E:\DIPPWF\um_workflowSaveCreateProfile.wsdl -p R
ND -d adb -s -o build\client--http-proxy-host 10.74.93.35 --http-proxy-port 80
Using AXIS2_HOME: E:\axis2-1.4
Using JAVA_HOME: C:\Program Files\Java\jdk1.6.0_02
Retrieving document at 'E:\DIPPWF\um_workflowSaveCreateProfile.wsdl'.
Retrieving document at 'um_workflowSaveCreateProfile_interface.wsdl', relative t
o 'file:/E:/DIPPWF/um_workflowSaveCreateProfile.wsdl'.
Retrieving schema at 'E:/DIPPWF/XMLSchema/common_parameters.xsd', relative to 'f
ile:/E:/DIPPWF/um_workflowSaveCreateProfile_interface.wsdl'.
Retrieving schema at 'E:/DIPPWF/XMLSchema/common_authentication.xsd', relative t
o 'file:/E:/DIPPWF/um_workflowSaveCreateProfile_interface.wsdl'.
Retrieving schema at 'E:/DIPPWF/XMLSchema/workflowSaveCreateProfile.xsd', relati
ve to 'file:/E:/DIPPWF/um_workflowSaveCreateProfile_interface.wsdl'.
Retrieving schema at 'navbar.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/workfl
owSaveCreateProfile.xsd'.
Retrieving schema at 'searchform.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/wo
rkflowSaveCreateProfile.xsd'.
Retrieving schema at 'component_basic.xsd', relative to 'file:/E:/DIPPWF/XMLSche
ma/workflowSaveCreateProfile.xsd'.
Retrieving schema at 'displaytype.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/c
omponent_basic.xsd'.
Retrieving schema at 'error.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/compone
nt_basic.xsd'.
Retrieving schema at 'component_workflowTicket.xsd', relative to 'file:/E:/DIPPW
F/XMLSchema/workflowSaveCreateProfile.xsd'.
Retrieving document at 'E:\DIPPWF\um_workflowSaveCreateProfile.wsdl'.
Retrieving document at 'um_workflowSaveCreateProfile_interface.wsdl', relative t
o 'file:/E:/DIPPWF/um_workflowSaveCreateProfile.wsdl'.
Retrieving schema at 'E:/DIPPWF/XMLSchema/common_parameters.xsd', relative to 'f
ile:/E:/DIPPWF/um_workflowSaveCreateProfile_interface.wsdl'.
Retrieving schema at 'E:/DIPPWF/XMLSchema/common_authentication.xsd', relative t
o 'file:/E:/DIPPWF/um_workflowSaveCreateProfile_interface.wsdl'.
Retrieving schema at 'E:/DIPPWF/XMLSchema/workflowSaveCreateProfile.xsd', relati
ve to 'file:/E:/DIPPWF/um_workflowSaveCreateProfile_interface.wsdl'.
Retrieving schema at 'navbar.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/workfl
owSaveCreateProfile.xsd'.
Retrieving schema at 'searchform.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/wo
rkflowSaveCreateProfile.xsd'.
Retrieving schema at 'component_basic.xsd', relative to 'file:/E:/DIPPWF/XMLSche
ma/workflowSaveCreateProfile.xsd'.
Retrieving schema at 'displaytype.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/c
omponent_basic.xsd'.
Retrieving schema at 'error.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/compone
nt_basic.xsd'.
Retrieving schema at 'component_workflowTicket.xsd', relative to 'file:/E:/DIPPW
F/XMLSchema/workflowSaveCreateProfile.xsd'.
*[ERROR] More than one part for message OblixIDXMLInput*
org.apache.axis2.description.WSDL11ToAxisServiceBuilder$WSDLProcessingException:
More than one part for message OblixIDXMLInput
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.addQNameRefer
ence(WSDL11ToAxisServiceBuilder.java:1162)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.addQNameRefer
ence(WSDL11ToAxisServiceBuilder.java:1085)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateBindi
ng(WSDL11ToAxisServiceBuilder.java:686)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateEndpo
int(WSDL11ToAxisServiceBuilder.java:538)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateEndpo
ints(WSDL11ToAxisServiceBuilder.java:489)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateServi
ce(WSDL11ToAxisServiceBuilder.java:363)
at org.apache.axis2.description.WSDL11ToAllAxisServicesBuilder.populateA
llServices(WSDL11ToAllAxisServicesBuilder.java:107)
at org.apache.axis2.wsdl.codegen.CodeGenerationEngine.<init>(CodeGenerat
ionEngine.java:147)
at org.apache.axis2.wsdl.WSDL2Code.main(WSDL2Code.java:35)
at org.apache.axis2.wsdl.WSDL2Java.main(WSDL2Java.java:24)
Exception in thread "main" org.apache.axis2.wsdl.codegen.CodeGenerationException
: Error parsing WSDL
at org.apache.axis2.wsdl.codegen.CodeGenerationEngine.<init>(CodeGenerat
ionEngine.java:153)
at org.apache.axis2.wsdl.WSDL2Code.main(WSDL2Code.java:35)
at org.apache.axis2.wsdl.WSDL2Java.main(WSDL2Java.java:24)
Caused by: org.apache.axis2.AxisFault: More than one part for message OblixIDXML
Input
at org.apache.axis2.AxisFault.makeFault(AxisFault.java:430)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateServi
ce(WSDL11ToAxisServiceBuilder.java:397)
at org.apache.axis2.description.WSDL11ToAllAxisServicesBuilder.populateA
llServices(WSDL11ToAllAxisServicesBuilder.java:107)
at org.apache.axis2.wsdl.codegen.CodeGenerationEngine.<init>(CodeGenerat
ionEngine.java:147)
... 2 more
Caused by: org.apache.axis2.description.WSDL11ToAxisServiceBuilder$WSDLProcessin
gException: More than one part for message OblixIDXMLInput
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.addQNameRefer
ence(WSDL11ToAxisServiceBuilder.java:1162)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.addQNameRefer
ence(WSDL11ToAxisServiceBuilder.java:1085)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateBindi
ng(WSDL11ToAxisServiceBuilder.java:686)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateEndpo
int(WSDL11ToAxisServiceBuilder.java:538)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateEndpo
ints(WSDL11ToAxisServiceBuilder.java:489)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateServi
ce(WSDL11ToAxisServiceBuilder.java:363).
Thanks in advance.
akshay

Hello,
Were you able to resolve this issue ?
I am seeing the same issue and at my wits end.
regards
Amit

SQL Query of an OWB map (row based)

If I trace a session, execute an OWB map (row based), will the trace file contain the actual SQL query ?
The problem with me is that when I am executing this row -based OWB map, it is throwing me an error CursorFetchMapTerminationRTV20007 BUT ( plus taking a long time) when I am taking out the intermediate SQL insert query,it is working fine ( and also within a very short period of time)
Execution status = COMPLETE
message text = ORA-06502: PL/SQL: numeric or value error: character string buffer too small
message text = CursorFetchMapTerminationRTV20007
No. task errors = 0
No. task warnings = 2
No. errors = 1
Since this OWB map (Truncate Insert) is row based hence I cannot cannot get the back end query from the OWB generated pl/sql package so wondering if I trace the session, check the trace file, may be I will able to see the exact SQL query generated. But wanted to confirm the same.

Yes, the actual SQL run in the session will be in the trace file.

Could I use PCI-6601 to generate a 200Hz clock based on a external 40kHz clock?

Could I use PCI-6601 to generate a 200Hz clock based on a external 40kHz clock?
That means I want to use PCI-6601 as a frequency divider. (40KHz->200Hz)
Is it possible? Is there any example I can refer to?

1. Yes it's definitely possible to make such a frequency divider.
2. Here are a couple links that may help:
http://forums.ni.com/ni/board/message?board.id=40&message.id=3607&requireLogin=False
http://forums.ni.com/ni/board/message?board.id=170&message.id=78359#M78359
http://forums.ni.com/ni/board/message?board.id=40&message.id=4232&requireLogin=False
-Kevin P.

Import row based complex csv or excel to DB using SSIS

What is the best approach to deal with complex row based object hierarchy in CSV or Excel file in importing into DB?
eg. We have the following CSV or Excel data (Pipe delimited and \r\n separate a new row):
START|\r\n
MEMBER|Mr|John|Lee|\r\n
INSURANCE|2015-1-15|LIFE|\r\n
END|\r\n
START|\r\n
MEMBER|Ms|Mary|Scott|\r\n
INSURANCE|2015-1-10|LIFE|\r\n
END|\r\n
Here each START/END marks one record. The final goal is to transform it into an XML like this:
<Members>
   <Member>
     <Title>Mr<\Title>
     <FN>John<\FN>
     <LN>Lee<\LN>
     <Insurance>
         <Join_Date>2015-1-10<\Join_Date>
         <Category>Life<\Category>
     <\Insurance>
   <\Member>
   <Member>
   <\Member>
<\Members>
Thanks for any input.

Hi awlinq,
There is no direct option for converting Excel to XML. There are two common methods to achieve this requirement:
Create a schema defines the structure of the XML file based on the requirement as XML Source, then use this it to format the excel file to XML file in Microsoft Excel. For more details, please refer to the following blog:
http://www.excel-easy.com/examples/xml.html
Store data into a SQL table and then convert it into XML by using bulk copy utility (BCP) and FOR XML syntax with T-SQL query. The following links are for your references:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/bbc70f56-1421-4970-a3c8-c03e990e0054/convert-ms-excel-file-to-xml-using-ssis?forum=sqlintegrationservices
http://www.codeproject.com/Tips/239156/Export-data-from-SQL-Server-as-XML
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

Using a ommand to generate more than one row of data in utl file

Hi Guys
This might be a pretty long one. But I require help with regards to using outer and inner loops within my code.
Here is the task:
Each account involved with the DCA Allocation has an entry in the DCAACCOUNTALLOCATION table to track its progress. The STATUS value of the entry shows the position of the account in the DCA Allocation process.
The status entry being tested is 3.
Below is the code:
create or replace
PROCEDURE DCA_BMW_OUT
IS
-- Declare all variables as reference
v_out_file UTL_FILE.FILE_TYPE;
v_row_Count NUMBER;
r_bmw NUMBER;
v_out_directory all_directories.directory_path%type;
v_out_filehandle UTL_FILE.FILE_TYPE := NULL;
v_out_buffer varchar2 (32767);
v_records NUMBER;
body_output varchar2(32759 BYTE);
dictionary_guarantorsexist varchar2 (1 Char);
-- Text required within this part of the procedure
v_body varchar2(32767 BYTE);
v_header VARCHAR2(32759 BYTE);
BEGIN
FOR r_bmw IN
( SELECT *
FROM dcaadditionaldata
WHERE directory_name IS NOT NULL
) LOOP
BEGIN
-- Output file to be added into the directory specified
v_out_file := utl_file.fopen (r_bmw.directory_name, 'DCAExport_1_' || TRIM(TO_CHAR(SYSDATE,'DDMMYYYY_HH24MISS')) || '.txt', 'W');
-- The Header data which will be outputted to the file
v_header := 'KennzeichenBrgschaftsforderungGesamtforderung|Währung|Übergabedatum|DifferenzierungAnwalts-oderInkassofall|MainMarktpartnernummer|
MainAnrede|MainTitel|MainName|MainVorname|MainStraße|MainHausnummer|MainPLZ|MainOrt|MainLand|MainGeburtsdatum|MainTelefonnr.Schuldner|G1Marktpartnernummer
G1Anrede G1Titel G1Name G1Vorname G1Straße G1Hausnummer G1PLZ G1Ort G1Land G1Geburtsdatum G1Telefonnr.Schuldner G2Marktpartnernummer G2Anrede G2Titel
G2Name|G2Vorname|G2Straße|G2Hausnummer|G2PLZ|G2Ort|G2Land|G2Geburtsdatum|G2Telefonnr.Schuldner|G3Marktpartnernummer|G3Anrede|G3Titel|G3Name|G3Vorname|
G3Straße|G3Hausnummer|G3PLZ|G3Ort|G3Land|G3Geburtsdatum|G3Telefonnr.Schuldner|G4Marktpartnernummer|G4Anrede|G4Titel|G4Name|G4Vorname|G4Straße|G4Hausnummer|
G4PLZ|G4Ort|G4Land|G4Geburtsdatum|G4Telefonnr Schuldner|G5Marktpartnernummer|G5Anrede|G5Titel|G5Name|G5Vorname|G5Straße|G5Hausnummer|G5PLZ|G5Ort|G5Land|
G5Geburtsdatum|G5Telefonnr.Schuldner|Kundennr.|Bestandsnr.|Finanzierungsnr.|KennzeichenFinanzierung/Leasing|Kennzeichenprivat/gewerblich|
reguläresVertragsende|Laufzeit|Vertragsdatum|Vertragsstatus|Ratenbetrag|Filiale/Gebiet|Finanzierungstyp|BankverbindungKonto|BankverbindungBLZ|
RSVKennzeichen|Kündigungsdatum|Modell|Fahrgestellnummer|KFZKennzeichen|KFZZulassungsdatum|CoD1Marktpartnernummer|CoD1Anrede|CoD1Titel|CoD1Name|
CoD1Vorname|CoD1Straße|CoD1Hausnummer|CoD1PLZ|CoD1Ort|CoD1Land|CoD1Geburtsdatum|CoD1Telefonnr.Schuldner|CoD2Marktpartnernummer|CoD2Anrede|CoD2Titel|
CoD2Name|CoD2Vorname|CoD2Straße|CoD2Hausnummer|CoD2PLZ|CoD2Ort|CoD2Land|CoD2Geburtsdatum|CoD2Telefonnr.Schuldner|CoD3Marktpartnernummer|CoD3Anrede|
CoD3Titel|CoD3Name|CoD3Vorname|CoD3Straße|CoD3Hausnummer|CoD3PLZ|CoD3Ort|CoD3Land|CoD3Geburtsdatum|CoD3Telefonnr.Schuldner|CoD4Marktpartnernummer|
CoD4Anrede|CoD4Titel|CoD4Name|CoD4Vorname|CoD4Straße|CoD4Hausnummer|CoD4PLZ|CoD4Ort|CoD4Land|CoD4Geburtsdatum|CoD4Telefonnr.Schuldner|
CoD5Marktpartnernummer|CoD5Anrede|CoD5Titel|CoD5Name|CoD5Vorname|CoD5Straße|CoD5Hausnummer|CoD5PLZ|CoD5Ort|CoD5Land|CoD5Geburtsdatum|
CoD5Telefonnr.Schuldner Y|Y|5830,99|EUR|20/08/2009|DCA|4|123456|Herr||Mueller|Rainer|Messigasse|33|84432|Filz|Deutschland|01/07/1957|08912345|234567|Frau|Dr|Mueller|Rita|Messigasse|33|84432|Filz|Deutschland|13/12/1955|08912345|||||||||||||||||||||||||||||||||||||||||||||||||76543|5000234567||Lease|Privat|12/12/2013|60|12/12/2008||250,50|US|Rate|1234567890|32343450|N||BMW 320 i|W34567890PA34567|M-H-3456|09/12/2008||||||||||||||||||||||||
N|450,80|EUR|20/08/2009|DCA|4|987654|Frau||Meier|Heide|Beinstr.|44|86353|Laus|Deutschland|03/06/1949|08987654|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||87654||8765675585|Loan|Gewerblich|14/03/2012|72|14/03/2006||500,01|DF|Select|976579657|32343450|N||BMW 500 sl|W94567890PA34568|M-H-3457|10/03/2006|34343434|Herr|Dipl|Meier|Rudolf|Heislestr.|69|85433|Maus|Deutschland|28/05/1945|08934567|234567|Frau|Dr|Mueller|Rita|Messigasse|33|84432|Filz|Deutschland|13/12/1955|08912345
Y|33970,50|EUR|20/08/2009|Lawyer|4|64646464|Frau||Schmidt|Susanne|Hueftgasse|55|89363|Maus|Deutschland|23/08/1933|08934567|34343434|Herr|Dipl|Meier|Rudolf|Heislestr.|69|85433|Maus|Deutschland|28/05/1945|08934567|234567|Frau|Dr|Mueller|Rita|Messigasse|33|84432|Filz|Deutschland|13/12/1955|08912345|||||||||||||||||||||||||||||||||||||98757|5000785675||Lease|Privat|11/11/2009|48|11/11/2005||380,70|GH|Zielrate|234567899|32343450|Y||BMW 380 s|W54567890PA34569|M-H-3458|07/11/2005||||||||||||||||||||||||
N|10040,20|EUR|20/08/2009|Lawyer|4|4865465|Herr||Schulz|Karl|Nasenweg|77|83354|Schuh|Deutschland|18/01/1965|08972545|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||46789|50004765787||Lease|Privat|16/09/2012|60|16/09/2007||1234,56|OS|ZUS|98765432|32343450|Y||BMW 280 i|W74567890PA34570|M-H-3459|12/09/2007||||||||||||||||||||||||';
utl_file.PUT_LINE(v_out_file,v_header,TRUE);
-- Below will output a row of data which satisfy the requirements.
FOR body_output IN
( SELECT
AccountDetails.CUSTOMERNUMBER, AccountDetails.ACCOUNTNUMBER, CUSTOMERDETAILS.CDTITLE, CUSTOMERDETAILS.CDFIRSTNAME, CUSTOMERDETAILS.CDLASTNAME, AccountDetails.ACCOUNTTYPE,
AccountDetails.ORIGINALCONTRACTENDDATE, AccountDetails.CONTRACTTERM, AccountDetails.CONTRACTENDDATE, AccountDetails.BRANCHAREA, AccountDetails.PRODUCTTYPE,
AccountDetails.HOUSEBANKACCOUNT, AccountDetails.CARMODEL, AccountDetails.CARLICENCE, AccountDetails.ARREARSBALANCE, AccountDetails.CODEBTOR, AccountDetails.GUARANTORNUMBER
FROM AccountDetails
JOIN CUSTOMERDETAILS ON AccountDetails.CUSTOMERNUMBER = CUSTOMERDETAILS.CUSTOMERS1
WHERE EXISTS
( SELECT *
FROM Dcaaccountallocation
JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
WHERE Dcaaccountallocation.dcaid = 41
AND Dcaaccountallocation.status = 3
AND DebtEpisodes.DCASentDate IS NULL
AND Dcaaccountallocation.ACCOUNTID = AccountDetails.ACCOUNTNUMBER
AND DebtEpisodes.DCAORLAWYER = 'DCA'
LOOP
UTL_FILE.PUT_LINE (v_out_file,
body_output.CUSTOMERNUMBER|| '|' || body_output.ACCOUNTNUMBER|| '|' ||body_output.CDTITLE|| '||' ||body_output.CDFIRSTNAME || '|||||' ||
body_output.CDLASTNAME|| '||||' || body_output.ACCOUNTTYPE|| '|' ||body_output.ORIGINALCONTRACTENDDATE|| '||||' ||body_output.CONTRACTTERM || '|||||' ||
body_output.CONTRACTENDDATE|| '|' || body_output.BRANCHAREA|| '||' ||body_output.PRODUCTTYPE|| '||' ||
body_output.HOUSEBANKACCOUNT|| '|||' || body_output.CARMODEL|| '||||' ||body_output.CARLICENCE|| '|' ||
body_output.ARREARSBALANCE|| '||||' || body_output.CODEBTOR|| '|' ||body_output.GUARANTORnumber);
END LOOP;
UTL_FILE.fclose (v_out_file);
EXCEPTION
WHEN OTHERS THEN
UTL_FILE.put_line (v_out_file, 'failed');
-- If any errors occur when closing the file, then we close the opened file.
IF utl_file.is_open(v_out_file) THEN
UTL_FILE.fclose (v_out_file);
END IF;
END;
UPDATE DebtEpisodes
SET handoverdate = null
WHERE DCAORLAWYER = 'DCA'
AND accountid IN
( SELECT accountid
FROM Dcaaccountallocation
WHERE Dcaaccountallocation.status = 3
AND Dcaaccountallocation.dcaid = 41
END LOOP;
END DCA_BMW_OUT;
Currently, the above codes issue is that although many rows of data have been inputted in all the tables, with regards to the select criteria above (in italics), it only produces one row of data when i expect more than one to appear.
If the query only outputs one row but you're expecting it to produce more than one row, then you need to dissect the statement to find out where the output is being unduly restricted
I was told maybe an outerloop or an inner loop would do the trick, but really stuck on how and where to put it.
Hope this makes sense guys and I would really appreciate your time.
Thanks

if i run this particular code
( SELECT
AccountDetails.CUSTOMERNUMBER, AccountDetails.ACCOUNTNUMBER, CUSTOMERDETAILS.CDTITLE, CUSTOMERDETAILS.CDFIRSTNAME, CUSTOMERDETAILS.CDLASTNAME, AccountDetails.ACCOUNTTYPE,
AccountDetails.ORIGINALCONTRACTENDDATE, AccountDetails.CONTRACTTERM, AccountDetails.CONTRACTENDDATE, AccountDetails.BRANCHAREA, AccountDetails.PRODUCTTYPE,
AccountDetails.HOUSEBANKACCOUNT, AccountDetails.CARMODEL, AccountDetails.CARLICENCE, AccountDetails.ARREARSBALANCE, AccountDetails.CODEBTOR, AccountDetails.GUARANTORNUMBER
FROM AccountDetails
JOIN CUSTOMERDETAILS ON AccountDetails.CUSTOMERNUMBER = CUSTOMERDETAILS.CUSTOMERS1
WHERE EXISTS
( SELECT *
FROM Dcaaccountallocation
JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
WHERE Dcaaccountallocation.dcaid = 41
AND Dcaaccountallocation.status = 2
AND DebtEpisodes.DCASentDate IS NULL
AND Dcaaccountallocation.ACCOUNTID = AccountDetails.ACCOUNTNUMBER
AND DebtEpisodes.DCAORLAWYER = 'DCA'
This returns 1 row of data
However if i run a small part of the above code...
SELECT *
FROM Dcaaccountallocation
JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
WHERE Dcaaccountallocation.dcaid = 41
AND Dcaaccountallocation.status = 2
It returns a lot of rows with a status of 2
Now i presume what I am going to do is to ensure that all the fields provide satisfactory requirements, with regards to the above code. Although I have many records in all the stated tables already.
:(

ORA-20101: Row based mode not supported

Hi,
I'm having this situation:
Process flow with 4 mappings ends with 2 mappings successfully and 2 mappings with error:
ORA-20101: Row based mode not supported
But when I started those mappings separatly (one by one) they've all completed successfully.
Is it possible that default operating mode and generation mode can cause this error? On those 2 mapping that failed the default operating mode and generation mode was SET_BASED. But it was the same when I ran them again and they did complete with success..
Has anyone came accross with this or similar situation?
Any help would be much appreciated.
Regards
Vedran

Vedran,
What's the version of owb you are using?
can you post header of the package assiociated to process flow?
I had a problem running my "Set Based" mapping. It fails with the same error message "Row based mode not supported".
I noticed that the sequence of "Generation Mode" in my OWB 11.2 (on windows) was:
row_based = 1
row_baesd_target =2
set_based=3
set_based_failover=4
set_based_failover_target=5
but that of related package header was:
MODE_SET CONSTANT BINARY_INTEGER := 0;
MODE_ROW CONSTANT BINARY_INTEGER := 1;
MODE_ROW_TARGET CONSTANT BINARY_INTEGER := 2;
MODE_SET_FAILOVER_ROW CONSTANT BINARY_INTEGER := 3;
MODE_SET_FAILOVER_ROW_TARGET CONSTANT BINARY_INTEGER := 4;
I think it is a bug because changing this part of package as following and recompiling the package, my problem has been solved:
MODE_SET CONSTANT BINARY_INTEGER := 3;
MODE_ROW CONSTANT BINARY_INTEGER := 1;
MODE_ROW_TARGET CONSTANT BINARY_INTEGER := 2;
MODE_SET_FAILOVER_ROW CONSTANT BINARY_INTEGER := 4;
MODE_SET_FAILOVER_ROW_TARGET CONSTANT BINARY_INTEGER := 5;
Regards

Adding rows based on current and next row

I got some excellent help on multiplying rows based on start and end date in this
thread, resulting in the query below. It helps me follow Vehicle activity and Vehicle allocation of our vehicles day by day. Now I would like to add another feature to the query, if it is possible.
The problem is that in our database, only actual tasks are registered, which means that the time when the vehicle is between tasks is not showing. I could of course calculate total available time per vehicle and month, but that would not tell me where the
vehicles are waiting, when during the day, etc.
So I would like to insert rows for when the vehicles are standing still, and the logic would be something like this:
If vehicle number on current row equals vehicle number on the next row and End (date/time) of current row < Start (date/time) of next row, insert row after current row. Set Start=End of current row and End=Start of next row. Set From=To
of current row and To=To of current row. Set Vehicle activity to "Not active". Finaly copy all other fields from current row.
Is this possible to achieve in Power Query?
Brgds,
Caj
let
    Source = Sql.Databases("sql10"),
    SLM = Source{[Name="SLM"]}[Data],
    dbo_V_LKPI = SLM{[Schema="dbo",Item="V_LKPI"]}[Data],
    RenamedColumns = Table.RenameColumns(dbo_V_LKPI,{{"ActualDeparture", "Start"}, {"ActualArrival", "End"}}),
     Records = Table.ToRecords(V_LocoKPI),
      DateTime.IsSameDay = (x, y) => Date.Year(x) = Date.Year(y) and Date.Month(x) = Date.Month(y) and Date.Day(x) = Date.Day(y),
      Expand = (x) => List.Generate(
          () => Record.Combine({x, [End=Date.EndOfDay(x[Start])]}),
          (record) => record[Start] <= x[End],
          (record) => let
              NextStart = Date.StartOfDay(Date.AddDays(record[Start], 1)),
              NextEnd = Date.EndOfDay(NextStart),
              ThisEnd = List.Min({NextEnd, x[End]})
          in
              Record.Combine({record, [Start=NextStart, End=ThisEnd]})),
      Transformed = List.Transform(Records, each if DateTime.IsSameDay([Start], [End]) then {_} else Expand(_)),
      Combined = List.Combine(Transformed),
      Result = Table.FromRecords(Combined)
in
      Result
Csten

Here's some sample code. Again, we use List.Generate to build either a record or a list of records and then use List.Combine to bring the results back together before converting them to a table.
let
    CombineTwoRows = (x, y) =>
        let
            combine = x[Vehicle] = y[Vehicle] and x[End] < y[Start],
            added = Record.Combine({x, [Start=x[End], End=y[Start], Active=false]}),
            result = if combine then {added, y} else {y}
        in result,
    GenerateStandingRows = (table, combine) =>
        let
            Handle = (x, y) => {x, y},
            buffered = Table.Buffer(table),
            n = Table.RowCount(buffered),
            windows = List.Generate(
                () => {1, {buffered{0}}},
                (x) => x{0} <= n,
                (x) => {x{0} + 1, if x{0} < n then combine(buffered{x{0}-1}, buffered{x{0}}) else {buffered{x{0}}}},
                (x) => x{1})
        in
            windows,
    InsertInactivity = (table) => Table.FromRecords(List.Combine(GenerateStandingRows(table, CombineTwoRows))),
    TestData = Table.FromRows({
        {1, #datetime(2014, 2, 23, 13, 0, 0), #datetime(2014, 2, 23, 13, 10, 0), true},
        {1, #datetime(2014, 2, 23, 13, 20, 0), #datetime(2014, 2, 23, 13, 30, 0), true},
        {2, #datetime(2014, 2, 23, 13, 20, 0), #datetime(2014, 2, 23, 14, 0, 0), true},
        {2, #datetime(2014, 2, 23, 14, 20, 0), #datetime(2014, 2, 23, 14, 40, 0), true},
        {2, #datetime(2014, 2, 23, 16, 0, 0), #datetime(2014, 2, 23, 17, 0, 0), true},
        {2, #datetime(2014, 2, 24, 2, 0, 0), #datetime(2014, 2, 24, 3, 0, 0), true},
        {3, #datetime(2014, 2, 24, 1, 0, 0), #datetime(2014, 2, 24, 8, 0, 0), true},
        {3, #datetime(2014, 2, 24, 9, 0, 0), #datetime(2014, 2, 24, 10, 0, 0), true}
        }, {"Vehicle", "Start", "End", "Active"})
in
    InsertInactivity(TestData)

Unpivot task is generating rows for null inputs

So I have a C# application (VS 2012 with .NET4.5) that builds SSIS (SQL2012) packages programatically. the packages can be opened in the designer and they run fine. However, there is one case that is giving me a problem. I have an
OleDb source connected to a table in SQL server. I am using the unpivot task to convert columns in a sparse matrix to an Entity Attribute Value model. So basically, the primary key value of the source table is a pass-through value in the unpivot
task, each column is mapped to the destination column, and the attribute id is hard coded as the pivot key. Like i said this works great EXCEPT i came across one column and a table that was null for all the rows in the table. when I run the package,
it fails with:
OnError,SERVERNAME,DOMAIN\user,{94E83A3B-5386-4712-BEDC-11E35341675F},{94E83A3B-5386-4712-BEDC-11E35341675F},{3187347C-8D44-4D51-8FDB-B5C4159A58B0},9/14/2012 9:48:02 AM,9/14/2012 9:48:02 AM,-1071607780,0x,There was an error with OLE DB Destination.Inputs[OLE
DB Destination Input].Columns[AttributeId] on OLE DB Destination.Inputs[OLE DB Destination Input]. The column status returned was: "The value violated the integrity constraints for the column."
So I set up a data viewer on the data flow and found that the unpivot component was generating rows for every null value. not only that, but the values for the key column and the attribute id (which was hard coded) were also null for all the rows
sent from the unpivot to the ole db destination. I manually created a package with an unpivot for just the column in question and got the same result. then I inserted a value for every row in the table and the same package runs fine.
can someone offer any help or advice on what might be causing this?

its just two columns of data that are concerned. ten character numeric strings in the one and null in the other. the pivot key is hard coded in the unpivot component configuration screen. see the output of the data viewer below. How do
I get Microsoft involved with this?
2013399057 NULL
2013399488 NULL
2013399770 NULL
2013402244 NULL
2013402440 NULL
2013404066 NULL
2013404070 NULL
2013404203 NULL
2013404206 NULL
2013404401 NULL
2013404589 NULL
2013404705 NULL
2013404738 NULL
2013404768 NULL
2013404784 NULL
2013404813 NULL

Error in generating PDF Based form - SUI Report

Hi,
We are running Quarterly reports for Unemployment reporting at USA using tax reporter.
We are not able to see the complete spool output for the Wage Type Listings but only just 1 page. In the tax reporter log we get the error "Error in generating PDF Based form HR_F_WLIST_CA" for respective states.
Any idea how to resolve this.
We are on ERP 6.04.
Thanks,

Hi,
I think its Basis problem.Ask basis gyus to repair the connection and try again.
Regards,
Manoj.

Count the number of rows based on the values!!!

Hi all,
What I am using:
I am working with a multidimensional database in Visual Studio 2010 using its Data source view and calculation member and dimension usage.
What I want to do:
I have a fact table that has five columns(leg(s),hand(s), Head and body,overall) that shows the category of how severe the injury is. Let say for the records all columns never have an empty value(no injury is stated with 'No injury' ) . These five columns
are connected with a dimension that has all the available values (Category A-E of injury).The overall has the most severe from the other four columns. I want to create a bar chart with five different measure
values, one for each column, and count the values in those columns.
For example : I have a slicer in the excel and a bar chart and the slicer has all the values of the Category of the injury ( Cat a,Cat B, Cat C, ... Cat E, No injury ) and when i select one of them, lets say
Cat C, the bar chart should update and show how many Cat C each measurement column has.
Example FACT table:
ID LEG HAND HEAD BODY OVERALL
1 No A No No A
2 No D C C C
3 E C D A A
4 E E B C B
So if i selected C the bar chart will count (Leg = 0, Hand = 1, Head = 1, body = 2 and Overall = 1).
Any ideas ?
Thanks for the help and the time :)

Hi DBtheoN,
According to your description, you want to create a chart on excel worksheet to count the rows based on the value, right? If in this case, I am afraid this issue is related to Office forum, I am not the expert of Office, you can post the issue on the corresponding
forum.
However, this requirement can be done easily on SQL Server Reporting Services. You can using the expression below to count the rows.
=COUNT(IIF(Fields!LEG.Value=Parameters!TYPE.Value,1,NOTHING))
Regards,
Charlie Liao
TechNet Community Support

How can I select and delete rows based on the value in one column?

I searched through the discussion board, and found a thread on deleting blank rows, but not sure how to modify it to work with my issue.
I have put together a rather complicated spreadsheet for designing control systems, it calculates parts needed based on check boxes selected in a second spreadsheet.
Since not all systems require all parts there are many rows that have a 0 quantity value, I would like to select these rows and delete them once I have gone through the design phase (checking off required features on a separate sheet).
I like the way the other thread I found will gather all the blank rows at the bottom without changing the order of the rows with data in them.
I don't understand exactly how the formula in the other thread works well enough to modify it to look for a certain column.
I hope I made myself clear enough here, to recap, I would like to sort the rows based on a zero value in one (quantity) column, move them (the zero quantity rows) to the bottom of the sheet, and then delete the rows with a zero quantity (I can delete them manually, but would like to automate the sorting part).
Thanks for any help anyone can provide here.
Danny

I apologize but, as far as I know, Numbers wasn't designed by Ian Flemming.
There is no "this column will be auto-destructing after two minutes"
You will have to use your fingers to delete it.
I wish to add a last comment :
if your boss has the bad habit to look over your shoulder, it's time to find an other one.
As I am really pig headed, it's what I did. I became my own boss so nobody looked over my shoulder.
Yvan KOENIG (VALLAURIS, France) mercredi 13 juillet 2011 20:30:25
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Deleting duplicate rows based on three columns in Oracle 8i

Hi all,
The database we use is Oracle 8i.
The query below raises the too_many_rows exception when I launch an application. So I want to delete the duplicated rows :
select polarisation_1, polarisation_2
into v_pol1_tech, v_pol2_tech
from v_cfh_lien_element
where nom_lien = p_nom_lien
AND num_canal_1 = p_num_canal_1
AND freq_emise_1 = p_freq_emise_1;
Notice that with many possible values of the parameters p_nom_lien, p_num_canal_1 and p_freq_emise_1 then the exception is raised.
So how to delete generally the duplicated rows based on the three columns "nom_lien" , "num_canal_1" and "freq_emise_1" ?
Thank you very much indeed.

Check the other thread with same question deleting duplicate rows based on three columns in Oracle 8i

Using javascript to dynamically generate the html for a Spry table

I have some javascript which generates html code for a Spry
table which displays the content of a Spry data set. The problem is
that after I generate the html, Spry never fills in the values for
the table.
Here's what I'm doing:
Using a data set observer, check for onPostLoad and generate
the html code
Using innerHTML, stuff the code into the appropriate
<div>
Use regionName.updateContent() to update the region I just
created with the html code I generated
Interestingly, if I take the generated source for my page and
remove the data set observer, the Spry table displays correctly
with all the expected values. This suggests to me that my generated
html code is correct, but that there is some sort of timing issue
(i.e. Spry doesn't know about the new code I generated).
Any suggestions?

jalperin wrote:
> Here's what I'm doing:
>
Using a data set observer, check for
onPostLoad and generate the html
> code
>
Using innerHTML, stuff the code into
the appropriate <div>
>
Use regionName.updateContent() to
update the region I just created
> with the html code I generated
>
> Interestingly, if I take the generated source for my
page and remove the data
> set observer, the Spry table displays correctly with all
the expected values.
> This suggests to me that my generated html code is
correct, but that there is
> some sort of timing issue (i.e. Spry doesn't know about
the new code I
> generated).
>
> Any suggestions?
I'd guess that it is a timing issue as well. I haven't looked
much at the dataset capability in Spry, but it may be that the
dataset "finds" all of the regions and code that it applies to
before the onPostLoad event is triggered. If that is the case, then
your generated code doesn't exist yet,and so the dataset thinks
that there is nothing for it to apply to.
Will the HTML that you generate change based upon the dataset
that is actually returned? I guess I'm looking for the reason why
the HTML is being generated when it could be in the page itself and
avoid this issue completely.
Danilo Celic
|
http://blog.extensioneering.com/
| WebAssist Extensioneer
| Adobe Community Expert

Row based Target only mode not supported

when i try to execute a mapping i am getting the following error
Row based Target only mode not supported
what can be the reasons for this

Hello Michael
Check if you have a procedure (other than pre or post mapping) in your mapping. Every part of a mapping after a procedure can only be generated in row-based mode.
Hope this helps
Mate

OWB use unwanted RTRIM in generated row based code

Similar Messages

Maybe you are looking for