Own number format Y-Axis (value divided by 1000)

Hello everybody,
in WebI I have a quite simple chart.
In Y-Axis I show the values. How can I divide these values divided by 1000?
I have found the advanced format menu. But don't know the syntax how to make my own number format for this.
So for Example my value shown now is: 15.900.000 but it should be 15.900,00
Any workaround is welcome. But I would prefer not to touch the Universe and stay in WebI.
best regards Harry

Hi Harry,
There is no functionality to create a Custom Format Number and
Enhancement Request ADAPT01130144 has been created.
Regards,
Sarbhjeet Kaur

Similar Messages

Portal Form: Number Format Mask Accepted Values

Hi, i'm trying to format the way numbers are displayed in our forms, specifically instead of 50,000.00 we want 50,000 - without the .00.
I cannot find anything on format masks in the portal documentation, and the standard oracle masks I have looked up such as "NNNN" etc don't seem to be supported.
Trial and error has yielded a mask of : 99,999,999 which does get rid of the decimal, but introduces a problem where if the value is smaller than the mask it is shifted into the middle of the field (leading spaces are being added for every missing unit that is specified in the mask), but obviously if a smaller mask definition is used then larger numbers appear as ###### which is worse than the leading zero problem.
Where in the documentation can I find the accepted forms of numerical number format masks for use in portal forms?
Thanks..

Let me know if you find a solution to this. I even asked my Oracle instructor and she couldn't tell me how to setup a date format mask. This is what she gave me which doesn't work, but I'm not saying I'm the quickest race car at the track. lol
"Hi,
Try the following format mask "("099")""-"099"-"0999. They have an example of this on page 7-12. I'm not sure if OTN may have a listing of any Forms format mask. Search under Forms Developer and see if you find anything.
Take care,
L"

Break formatting and number format of SUM value

Where can I put number formatting functio, which will format breaking sum values...like:
to_char(#SUM_VALUE#,'fmt 999G999G999G990')....maybe this thread is somewhere posted, but I cannot find it.
Next, how to exclude showing reports total at the end of report?
Is there any working demo to see some hints...
THX!
Message was edited by:
Funky

Hello Damir,
"Maybe a hint for feature releases to have an option to disable total report sum on column …"There is a relative simple workaround, which will allow you exclude or highlight (style) this total report sum line, as you can see in here - http://htmldb.oracle.com/pls/otn/f?p=22710:10
In the Report Attribute page, I'm using the Break Formatting section first field "Display this text when printing report sums" - http://i10.tinypic.com/4ie8ck5.png .
If you want to exclude this line, you should use the same color as your cell background. For the example page, the code is looking like this:
<div id="FinalSum"><script type="text/javascript">var lastRow=html_CascadeUpTill('FinalSum','TR'); lastRow.style.color='#f7f7e7';</script></div>If, on the other hand, you want to highlight the line, or use any other CSS attribute style available, the code would look something like this:
<div id="FinalSum1"><script type="text/javascript">var lastRow=html_CascadeUpTill('FinalSum1','TR'); lastRow.style.backgroundColor='#CCCC99';</script>Total Report Sum</div> Regards,
Arie.

Luxembourg phone number formatting in iOS = 4.0

Hello,
Since upgrading to iOS 4, phone numbers here in Luxembourg are no longer displayed in a readable way, the formatting is incorrect.
Example : the correct phone number 26 52 26 52 would be displayed as 2 652 2652. That's bizarre, not logical and not readable. The first digit is not a prefix, it makes no sense at all to group phone numbers as # ### ####. You could show it in blocks of 2 or 4 (3 would be a bad choice because numbers are usually 6 or 8 digits).
Is this a know bug ? In MacOS you can define your own number formats in the address book, but that's obviously not possible in the iPhone.
Pascal

Yes, Region Format is set to Luxembourg. Language is set to English. I should have mentioned that my wife and my friends have exactly the same issue with their iPhones.
Pascal

Export to excel - number format

Hi,
Our version is SAP ERP Central Component 5.0 and we have just pathed the system from SPS18 to SPS23.
However from that time has change the export to excel functionality. Now after you select List - Export - Spreadsheet you can select either Excel (in Mhtml format) or All available formats - here the same format as in the old version has option 'Microsoft Excel (In existing XXL format). However when the report is exported eg account numbers do not have the correct format. So you need to convert them first to the correct number format with function VALUE in Excel.
Can this be somehow fixed?
Thanks,
Honza

Hi,
Dots and commas is not the issue.
The issue is that eg doment numbers are in the format in which you cannot vlookup them with other files where document numbers are in number format. So you need first to convert them using excel function value(). And then they have the correct format.
I am 100% sure there was not the same problem before we installed the higher patch.
Jan

Problem with the number format in the graph axis with Report Generation Toolkit.

Hi!
I'm trying to use the Report Generation Toolkit to plot some graphs in Excel.
My first problem is that I don't know how to configure the number format in the Excel Set Graph Font.vi so that my numbers are correctly displayed in the graph's axis. The only given option is general (0,0) but this is not enough for me, my numbers can get really small so I need engineering notation or fraccional format.
Second: I also insert a table with the graph source data, but the numbers are not correctly displayed either: for example:
0,75 is shown as:
0,750000
but 1,25 is shown as:
1!250!000
My guess is I am making to much or wrong string to number conversions or Excel is getting it wrong but I can't find my way...
Can someone help me with this?
Thanks,
Isabel

Here is my VI, it's just a trial so it can look messy...
Thanks,
Isabel
Message Edited by Isa_pm on 01-22-2007 01:12 PM
Attachments:
Create report.vi ‏96 KB

In fact it's about mac:excel, how convert in a cell a number written in text format into a value?

in fact it's about mac:excel8 or 11 in OSX10.7.4,
how convert in a cell a number written in text format into its value?
cheers francois

Hi francois,
If I copyone of them and do a past special/value, it does not work.
Try just Paste instead of Paste Special > Value
I know your question is about Excel, but this works in Numbers:
Copy 1 234 567 (with spaces) and Paste (not Paste Special) into a Cell in a Numbers Table. The result is 1234567 and it behaves as a number. A formula will consider it to be a number:
You asked Wayne: what do you mean by "to reference a cell" ??
The reference is from Cell A2 to Cell A1 through a formula, such as: =A1+1
Regards,
Ian.

String value to be displayed in number format

Hi All,
I am facing one problem when i am displaying a negative number in output.I have a number 123,567,90.89-.They want the sign should be on left-side.I did that shifting the sign to left by passing that value into one string type variable.But when i copied the value into string symbol ',' is ommiting and the value is getting stored as '12356790.89-',But i have to display the value in such a way that sign should be in left-side and it should be in number format.i.e,
-123,567,90.89.
Please give me a solution to resolve this problem..
With Regards,
R.P.Sastry

Hello,
You can try:
G_NUM_TEMP TYPE P DECIMALS 2
G_S_IMP_MOM TYPE /GEX/255 --> CHAR of 255
G_NUM_TEMP contains: 123,567,90.89-
WRITE G_NUM_TEMP TO G_S_IMP_MOM LEFT-JUSTIFIED.
"LEFT-JUSTIFIED is for respecting the final - and doing the write correctly.
"NO GROUPING is used to avoid the separation for thousands, so here it is no used.
In G_S_IMP_MOM string you should have the value separated correctly, then do the process to have the - sign at the beginning of the string.
I hope it will help you.

Populating the "number format" and "calculate" field properties?

I've been making a lot of Acrobat forms with an extremely large number of form fields (as in, over a hundred or more per form).
Each field has to have these properties:
-Set to Number format, with 4 decimal places specified
-Set the Calculate property with a simplified field notation (field1*field2), to perform multiplication, or, it's set wtih the "value is the (product) of the following fields" function.
Is there a way of copying these attributes to already pre-existing fields? It appears that for already existing fields, if you want them all to have these same attributes, you have to set them one by one-- very tedious. If you multi-select all fields at once, it doesn't let you set them all to the same calculation setting, and it doesn't even let you set them all to number format.
So, up till now I've simply made one (or a few) fields, set them to these properties, and then populated them by duplicating the fields, but-- I still then have then to go in and re-name every single field, so that each is a unique field-- also very tedious.
Is there some way that I don't know about, that would allow me to set these properties to multiple pre-existing fields at the same time?

Unfortunately, no.
However, you can set the the field's calculation formula using a simple script.
Let's say your fields are called field1, field2, field3, etc. You can then run this code from the console:
maxFields = 100; // let's say you have 100 fields
for (i=1; i<=maxFields; i++) {
f = this.getField("field"+i);
if (f) f.setAction("Calculate", "event.value = this.getField('x').value * this.getField('y').value;");
Of course, you can adjust the formula to your own needs.
Make sure you use single quotes inside of the script when you want to specify a literal string.

Solved: Pick Number format mask

Hello,
I'm trying to format all my numbers to a specific model:
999G999G999G999G990D00
I tried doing it like I did with 'PICK_DATE_FORMAT_MASK', where I define my format under
"Application Attributes>Definition". I called it PICK_NUMBER_FORMAT_MASK'.
It didn't work and i got the next error above my report:
report error:
ORA-01481: invalid number format model
I also tried to define an application item with the value: 999G999G999G999G990D00
but then I get the same error. If I paste my number format in my report column under Number / Date Format then it works perfect. But I can't change the global format of my numbers now.
Can anyone help me?
Thanks in advance.
Regards,
Oli

<p>Oli,</p>
<p>As you already discovered there is no PICK_NUMBER_FORMAT_MASK substitution variable like there is for date pickers. Perhaps this a nice enhancement request. However, there are some workarounds:
<ul><li>
<p>For reports, you can use your PICK_NUMBER_FORMAT_MASK if you convert the NUMBER columns into VARCHAR2 columns like this:<BR>
<p>to_char(number_column,'& PICK_NUMBER_FORMAT_MASK.')</p></li>
<li><p>Use ApexLib and extend the firefox plugin with your own numeric settings.</p></li>
<li><p>You can use the user interface defaults (table defaults, column defaults) in the shared components section of your application.</p></li>
</ul>
<p>With kind regards,</p>
<p>Jornica</p>

Number format issue

I just set up my computer to use the Argentine region to display dates, numbers, times, meassures, etc. The problem is that MS-Excel continues to display the comma to separate thousands instead of periods (i.e: 1,056 instead of 1.056) and this is causing me troubles with calculations. Isn't Mac OS X supposed to handle the number format across the system? or does Exel has a mind of its own when it comes to formatting numbers?
Thanks

Microsoft always has marched to the beat of their own drummer but I found this in the Excel help that seems to indicate they are at least trying to do things right. Check the Notes section at the end.
===============
• Format values in euro currency style
Use this procedure to apply a euro currency style to the selected cells. If the cells you want to format contain non-euro values, you instead need to convert the values to euros by using the EUROCONVERT function.
To use the EUROCONVERT function, you must select the Euro Currency Tool check box on the Add-ins dialog box (Tools menu, Add-ins command). If you do not see Euro Currency Tool listed in the Add-ins dialog box, then you must install the Excel Add-ins component, and then quit and restart Excel. For step 5 (Installation) of the Setup Assistant, expand Office Tools by clicking the arrow next to it, and then select the Excel Add-ins check box.
1. To display the Formatting toolbar, click View, point to Toolbars, and then click Formatting.
2. If you don't see the Euro Style button on the Formatting toolbar, click Preferences on the Excel menu, click Edit, and then select the Show Euro tool check box.
3. Select the cells that you want to format as euro currency style.
4. Click the Euro Style button.
Notes
• If you want to type the euro sign () in a cell, you can do so on a U.S. keyboard by pressing SHIFTOPTION2.
• The settings on the Formats or Numbers tab on the International pane (System Preferences) determine the position of the euro sign (that is, whether the symbol appears before or after the number and whether a space separates the symbol and the number), as well as the decimal symbol and the thousands separator.

Changing number format

Hi ,
I need to change number format . for example if its 1 lakh 1,00,000.56 (56 paise) its displaying as
1.00.000,56.
how to convert it to 1,00,000.56

System
       -->User Profile
                          -->own data
                                         -->Defaults tab
                                                            --> change decimal naotation accordingly.
Or try using thousand seperator
e.g. value(T)

How to override the NUMBER format in BEX?

Hi,
I want to override the number formats in BEX queries (Excel).
In the Query Designer -> Query Properties -> Value Display,
or in 3.x: Query Properties -> Display -> Number Format,
the setting "Display of +/- Signs" affects how the numeric values in Excel will be displayed. This setting seems to take effect after everything else is done.
I can change any cell formatting (pattern, border, color, etc.) except the number format. I have tried redefining Styles, assign different styles to the Result Area, setting up a default template, even Visual Basic (Sub SAPBEXonRefresh), nothing works, my settings always get overwritten by the query setting.
For example:
I am trying to assign the Number Format "Accounting", with a "$" sign in the far left of the fields, to the amounts in my workbook.
It should look like this: "$ (123,456.00)"
The results: my settings are replaced by the format "Currency" with the "$" sign.
" ($123,456.00)"
It must be due to that number format setting in the query designer.
I was hoping the number format setting in the query designer could be switched off. But apparently it is not possible. Not even the "Adjust Formatting after Refreshing" setting affects this behavior. It always takes effect.
Does anyone have any idea what could be done about it?
Thank you,
Vince

OK, I think I have just found the answer to my own question...
I had done something in the VB editor that created this whole problem. Now it is fixed and works as it should.
Thanks anyway.

Using conditional formatting on negative values in Web Analysis 931

Hi All,
Can I please have your thoughts on the below:
We open a web analysis report in Analyze View.
The scenarios are in the columns and we are trying to apply conditional formatting on negative values.
We right click the scenario in the columns and click Formatting...
We then tick the Conditional Formatting check box and we want to add a condition on negative numbers.
However we can only enter positive values as the - sign is not accepted. This means we cannot apply conditional formatting on negative values.
Does anyone know how this can be done? Am I missing the obvious?
Thanks for your help.
Seb

Gotcha. Ok. Have you thought about creating a new hidden calculated ColumnB whereby you multiply the values in ColumnA by -1 and then set your formatting based on the result in ColumnB. If the value in B is positive then you know A was a negative number so you can go from there, in a round about way? I don't have time at the moment to think it all the way out but something to think about. If your formatting involves just colors you could use Traffic Lighting to set the color on ColumnA based on result in ColumnB. Traffic Lighting out of the box is limited but it's a start until you have time to build your own.
-Karen

Excel MSGraph Axis Value w/ Report Gentration Tool kit help needed

Hello,
I am working on making all my Printed Data sheets dynamic so I don't need to have an Excel Template for each test I create. I have been able to make my own modifications to some of the Report Generation tool kit VIs to add little things I need or want changed, but I am stuck.
I currently have LabVIEW writing Charts in Excel, using the Insert Graph VIs from the tool kit but I want to be able to make the X Axis Values invisible but leave the Y values for this particular data sheet. I have looked through all my documentation but cannot find anything referring to setting that.
What is the correct ActiveX Method and/or Property that I need to incorporate to do this? I found that in Excel if I click on the Chart it is in the Chart Options Menu but I cannot find a way to control it through LabVIEW.
I am currently using 7.1.1 with Office 98 and the Report Generation Toolkit 1.1.0
Any ideas?
Thanks
Jeff
Jeff D.
OS: Win 7 Ultimate
LabVIEW Version: 2011,2010,2009 installed
Certified LabVIEW Architect

Hello,
LabVIEW should have access to everything that the excel ActiveX object publishes. One way to discover how to do it would be to record a macro in excel, where your recorded actions are on the x-axis as you desire. This way you will have a macro which you can run that will do this for you. Perhpas more importantly, you will then be able to look at the code for that macro you recorded, and make the equivalent calls in LabVIEW, which should basically expose which ActiveX calls on that object achieve the axis modification. In any event, to help you with this process, below are some useful links. Also, you will find other threads on this matter if you search the discussion forums.
Excel and LabVIEW Integration Tutorial:
http://zone.ni.com/devzone/conceptd.nsf/webmain/4d86c9752c658da78625689300730c10
Here are links to examples of using macros in Excel from LabVIEW:
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3DD2F56A4E034080020E74861&p_...
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3D9D856A4E034080020E74861&p_...
I hope this helps!
Best Regards,
JLS
Best,
JLS
Sixclear

Own number format Y-Axis (value divided by 1000)

Similar Messages

Maybe you are looking for