OWSM EMPTY BPEL PROCESS VIRTUALIZATION PROBLEM!!!!!!!!!!

Hi,
I developed an EMPTY BPEL PROCESS which gets instantiated by a FILE ADAPTER . I am trying to virtualize the process by using OWSM GATEWAYS, but get error when i test it in the test page option unders tools link in OWSM MONITOR.
I am also not sure about the efficacy of using gateways to virtualize an EMPTY BPEL PROCESS.
CAN WE USE GATEWAYS TO VIRTUALIZE AN EMPTY BPEL PROCESS INITIATED BY A FILE ADAPTER???????
Regards,
Vishnu

Hi,
I developed an EMPTY BPEL PROCESS which gets instantiated by a FILE ADAPTER . I am trying to virtualize the process by using OWSM GATEWAYS, but get error when i test it in the test page option unders tools link in OWSM MONITOR.
I am also not sure about the efficacy of using gateways to virtualize an EMPTY BPEL PROCESS.
CAN WE USE GATEWAYS TO VIRTUALIZE AN EMPTY BPEL PROCESS INITIATED BY A FILE ADAPTER???????
Regards,
Vishnu

Similar Messages

  • Empty BPEL process getting lost for multiple file reads

    Hi
    I have a empty BPEL process polling for files. It works fine when 1 or 2 files are put into the read folder.
    But when than 2 files are put the process is lost, and nothing happens.
    Is there any proper and tested method of handling this problem.
    Is tuning required is yes then what?
    We use SOA 10.1.3.1
    It would be very helpful if you would please put in your ideas and experience.
    Buddhadev

    Check your log as soon as you find that the parent process has found its way into the console. More information on logging can be found here - http://download-uk.oracle.com/docs/cd/B31017_01/integrate.1013/b28982/logging.htm
    Not quite sure why its so, but since 10.1.3, I've observed that the console simply doesn't show errored processes at times. So, checking the log can be a starting point in diagnosing the real issue.
    HTH
    Antony

  • Empty BPEL Process in SOA 11g.

    HI,
    We created all bpel processes using Empty BPEL Process template Available in the jdeveloper. Then we add AQ adapter to read the data and calling some third party webservices.
    Is empty Bpel Processes option act as synchronous or asynchronous?
    as for my understanding its always act as a asynchronous.
    Please clear my doubt.

    Hi Pablo,
    Thanks For the reply.
    we are using DB adapter which will poll on table,that means this is the service which creates the bpel instance.
    the only prob we are facing is sometimes BPEL instances are never comeout from the RUNNING state and error its showing error as"The transaction was rolled back. The work performed for bpel instance "290086" was rolled back to the previous dehydration point, but the audit trail has been saved.You can recover the instance from the recovery console by resubmitting the callback message or activity for execution"
    Oracle suggested this problem occurs when you are using Synchronous processes. increase the timeout settings.
    DB adapter Polling is always Asynchronous?
    can you just share your thoughts on this..
    Regards,
    Sudha

  • Empty BPEL process freezes

    I have an Empty BPEL process which is invoked by an inbound adapter. When it is instantiated, I immediately call the checkpoint() function in embedded Java in order to get it to show up on the console. It shows up there.
    The process makes a couple assignments and then runs some embedded Java that, depending on the input, should take between 1 minute to 1 hour to complete. I have put checkpoint() throughout the process in order to localize the problem. I put a terminate immediately after this long-running embedded Java. The process never reaches this terminate.
    The process always makes it into the long-running embedded Java, but never makes it out, regardless of if it is a tiny input that should only take a minute, or a large input that should take an hour. I have checked behind the scenes and found that the embedded Java sometimes complete all its processing, even when the BPEL Console is stuck on the embedded java. Other times it seems to terminate my java prematurely before it can finish. This code has been running for a long time without any problems outside of BPEL, so I know it is not hanging inside of it. It's just that execution never seems to be able to get back into BPEL and restart the progress in the console following the embedded Java, or it takes a while and then it terminates the embedded Java.
    I've seen other people ask "what is an Empty BPEL process" but they never received satisfactory answers. Which transaction-timeout constraints affect Empty processes? Does the syncMaxWaitTime affect Empty bpel processes? Or is it treated like an asynchronous process?
    My syncMaxWaitTime is 9600 seconds, and my transaction timeout settings have been tweaked similarly.
    FYI: I run the long-running embedded java on my local machine using the exact same inputs I am giving it when it is in the BPEL process, and it works flawlessly for large and small files alike.
    My domain logs give me the following when I use an input that should take about 1 minute max to complete processing. I provided the input and it was picked up about 1 minute after the TestFileTagValidation process was deployed.
    Process "TestFileTagValidation" (revision "1.0") successfully compiled.
    <2008-05-30 11:48:27,922> <INFO> <tst.collaxa.cube.engine.deployment> Process "TestFileTagValidation" (revision "1.0") successfully loaded.
    <2008-05-30 11:50:25,968> <ERROR> <tst.collaxa.cube.engine.dispatch> <DispatchHelper::handleMessage> failed to handle message
    javax.ejb.EJBException: An exception occurred during transaction completion: ; nested exception is: javax.transaction.RollbackException: Timed out
    javax.transaction.RollbackException: Timed out
         at com.evermind.server.ApplicationServerTransaction.checkForRollbackOnlyWhileInCommit(ApplicationServerTransaction.java:633)
         at com.evermind.server.ApplicationServerTransaction.doCommit(ApplicationServerTransaction.java:273)
         at com.evermind.server.ApplicationServerTransaction.commit(ApplicationServerTransaction.java:162)
         at com.evermind.server.ApplicationServerTransactionManager.commit(ApplicationServerTransactionManager.java:472)
         at com.evermind.server.ejb.EJBTransactionManager.end(EJBTransactionManager.java:132)
         at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:57)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
         at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
         at CubeEngineBean_LocalProxy_4bin6i8.handleWorkItem(Unknown Source)
         at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handle(PerformMessageHandler.java:45)
         at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:138)
         at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
         at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
         at sun.reflect.GeneratedMethodAccessor52.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.SetContextActionInterceptor.invoke(SetContextActionInterceptor.java:44)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
         at oracle.j2ee.connector.messageinflow.MessageEndpointImpl.OC4J_invokeMethod(MessageEndpointImpl.java:297)
         at WorkerBean_EndPointProxy_4bin6i8.onMessage(Unknown Source)
         at oracle.j2ee.ra.jms.generic.WorkConsumer.run(WorkConsumer.java:268)
         at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242)
         at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215)
         at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190)
         at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:814)
         at java.lang.Thread.run(Thread.java:595)
    javax.ejb.EJBException: An exception occurred during transaction completion: ; nested exception is: javax.transaction.RollbackException: Timed out
         at com.evermind.server.ejb.EJBUtils.createEJBException(EJBUtils.java:365)
         at com.evermind.server.ejb.EJBTransactionManager.end(EJBTransactionManager.java:139)
         at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:57)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
         at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
         at CubeEngineBean_LocalProxy_4bin6i8.handleWorkItem(Unknown Source)
         at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handle(PerformMessageHandler.java:45)
         at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:138)
         at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
         at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
         at sun.reflect.GeneratedMethodAccessor52.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.SetContextActionInterceptor.invoke(SetContextActionInterceptor.java:44)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
         at oracle.j2ee.connector.messageinflow.MessageEndpointImpl.OC4J_invokeMethod(MessageEndpointImpl.java:297)
         at WorkerBean_EndPointProxy_4bin6i8.onMessage(Unknown Source)
         at oracle.j2ee.ra.jms.generic.WorkConsumer.run(WorkConsumer.java:268)
         at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242)
         at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215)
         at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190)
         at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:814)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: javax.transaction.RollbackException: Timed out
         at com.evermind.server.ApplicationServerTransaction.checkForRollbackOnlyWhileInCommit(ApplicationServerTransaction.java:633)
         at com.evermind.server.ApplicationServerTransaction.doCommit(ApplicationServerTransaction.java:273)
         at com.evermind.server.ApplicationServerTransaction.commit(ApplicationServerTransaction.java:162)
         at com.evermind.server.ApplicationServerTransactionManager.commit(ApplicationServerTransactionManager.java:472)
         at com.evermind.server.ejb.EJBTransactionManager.end(EJBTransactionManager.java:132)
         ... 29 more
    <2008-05-30 11:50:25,969> <ERROR> <tst.collaxa.cube.engine.dispatch> <BaseScheduledWorker::process> Failed to handle dispatch message ... exception ORABPEL-05002
    Message handle error.
    An exception occurred while attempting to process the message "com.collaxa.cube.engine.dispatch.message.instance.PerformMessage"; the exception is: An exception occurred during transaction completion: ; nested exception is: javax.transaction.RollbackException: Timed out
    ORABPEL-05002
    Message handle error.
    An exception occurred while attempting to process the message "com.collaxa.cube.engine.dispatch.message.instance.PerformMessage"; the exception is: An exception occurred during transaction completion: ; nested exception is: javax.transaction.RollbackException: Timed out
         at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:171)
         at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
         at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
         at sun.reflect.GeneratedMethodAccessor52.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.SetContextActionInterceptor.invoke(SetContextActionInterceptor.java:44)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
         at oracle.j2ee.connector.messageinflow.MessageEndpointImpl.OC4J_invokeMethod(MessageEndpointImpl.java:297)
         at WorkerBean_EndPointProxy_4bin6i8.onMessage(Unknown Source)
         at oracle.j2ee.ra.jms.generic.WorkConsumer.run(WorkConsumer.java:268)
         at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242)
         at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215)
         at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190)
         at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:814)
         at java.lang.Thread.run(Thread.java:595)
    <2008-05-30 11:54:30,748> <INFO> <tst.collaxa.cube.compiler> validating "/actapps/oracle/product/10g/OracleAS1/bpel/domains/tst/tmp/.bpel_TestFileTagValidation_1.0_bb8f7f7b22434687ce1d3de0fe31ce65.tmp/TestFileTagValidation.bpel" ...
    <2008-05-30 11:54:31,840> <INFO> <tst.collaxa.cube.engine.deployment> <CubeProcessFactory::generateProcessClass>
    Process "TestFileTagValidation" (revision "1.0") successfully compiled.
    <2008-05-30 11:54:31,912> <INFO> <tst.collaxa.cube.engine.deployment> Process "TestFileTagValidation" (revision "1.0") successfully loaded.
    <2008-05-30 11:57:27,515> <INFO> <tst.collaxa.cube.compiler> validating "/actapps/oracle/product/10g/OracleAS1/bpel/domains/tst/tmp/.bpel_TestFileTagValidation_1.0_bb8f7f7b22434687ce1d3de0fe31ce65.tmp/TestFileTagValidation.bpel" ...
    <2008-05-30 11:57:28,275> <INFO> <tst.collaxa.cube.engine.deployment> <CubeProcessFactory::generateProcessClass>
    Process "TestFileTagValidation" (revision "1.0") successfully compiled.
    <2008-05-30 11:57:28,324> <INFO> <tst.collaxa.cube.engine.deployment> Process "TestFileTagValidation" (revision "1.0") successfully loaded.
    <2008-05-30 12:03:05,635> <INFO> <tst.collaxa.cube.compiler> validating "/actapps/oracle/product/10g/OracleAS1/bpel/domains/tst/tmp/.bpel_TestFileTagValidation_1.0_bb8f7f7b22434687ce1d3de0fe31ce65.tmp/TestFileTagValidation.bpel" ...
    <2008-05-30 12:03:06,326> <INFO> <tst.collaxa.cube.engine.deployment> <CubeProcessFactory::generateProcessClass>
    Process "TestFileTagValidation" (revision "1.0") successfully compiled.
    <2008-05-30 12:03:06,403> <INFO> <tst.collaxa.cube.engine.deployment> Process "TestFileTagValidation" (revision "1.0") successfully loaded.
    <2008-05-30 12:05:25,004> <INFO> <tst.collaxa.cube.compiler> validating "/actapps/oracle/product/10g/OracleAS1/bpel/domains/tst/tmp/.bpel_TestFileTagValidation_1.0_bb8f7f7b22434687ce1d3de0fe31ce65.tmp/TestFileTagValidation.bpel" ...
    <2008-05-30 12:05:25,644> <INFO> <tst.collaxa.cube.engine.deployment> <CubeProcessFactory::generateProcessClass>
    Process "TestFileTagValidation" (revision "1.0") successfully compiled.
    <2008-05-30 12:05:25,688> <INFO> <tst.collaxa.cube.engine.deployment> Process "TestFileTagValidation" (revision "1.0") successfully loaded.
    <2008-05-30 12:06:19,986> <INFO> <tst.collaxa.cube.compiler> validating "/actapps/oracle/product/10g/OracleAS1/bpel/domains/tst/tmp/.bpel_TestFileTagValidation_1.0_bb8f7f7b22434687ce1d3de0fe31ce65.tmp/TestFileTagValidation.bpel" ...
    <2008-05-30 12:06:20,711> <INFO> <tst.collaxa.cube.engine.deployment> <CubeProcessFactory::generateProcessClass>
    Process "TestFileTagValidation" (revision "1.0") successfully compiled.
    <2008-05-30 12:06:20,770> <INFO> <tst.collaxa.cube.engine.deployment> Process "TestFileTagValidation" (revision "1.0") successfully loaded.
    <2008-05-30 12:11:55,813> <INFO> <tst.collaxa.cube.compiler> validating "/actapps/oracle/product/10g/OracleAS1/bpel/domains/tst/tmp/.bpel_TestFileTagValidation_1.0_bb8f7f7b22434687ce1d3de0fe31ce65.tmp/TestFileTagValidation.bpel" ...
    <2008-05-30 12:11:56,637> <INFO> <tst.collaxa.cube.engine.deployment> <CubeProcessFactory::generateProcessClass>
    Process "TestFileTagValidation" (revision "1.0") successfully compiled.
    <2008-05-30 12:11:56,686> <INFO> <tst.collaxa.cube.engine.deployment> Process "TestFileTagValidation" (revision "1.0") successfully loaded.
    <2008-05-30 12:45:08,652> <ERROR> <tst.collaxa.cube.engine.dispatch> <DispatchHelper::handleMessage> failed to handle message
    javax.ejb.EJBException: An exception occurred during transaction completion: ; nested exception is: javax.transaction.RollbackException: Timed out
    javax.transaction.RollbackException: Timed out
         at com.evermind.server.ApplicationServerTransaction.checkForRollbackOnlyWhileInCommit(ApplicationServerTransaction.java:633)
         at com.evermind.server.ApplicationServerTransaction.doCommit(ApplicationServerTransaction.java:273)
         at com.evermind.server.ApplicationServerTransaction.commit(ApplicationServerTransaction.java:162)
         at com.evermind.server.ApplicationServerTransactionManager.commit(ApplicationServerTransactionManager.java:472)
         at com.evermind.server.ejb.EJBTransactionManager.end(EJBTransactionManager.java:132)
         at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:57)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
         at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
         at CubeEngineBean_LocalProxy_4bin6i8.handleWorkItem(Unknown Source)
         at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handle(PerformMessageHandler.java:45)
         at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:138)
         at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
         at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
         at sun.reflect.GeneratedMethodAccessor52.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.SetContextActionInterceptor.invoke(SetContextActionInterceptor.java:44)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
         at oracle.j2ee.connector.messageinflow.MessageEndpointImpl.OC4J_invokeMethod(MessageEndpointImpl.java:297)
         at WorkerBean_EndPointProxy_4bin6i8.onMessage(Unknown Source)
         at oracle.j2ee.ra.jms.generic.WorkConsumer.run(WorkConsumer.java:268)
         at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242)
         at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215)
         at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190)
         at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:814)
         at java.lang.Thread.run(Thread.java:595)
    javax.ejb.EJBException: An exception occurred during transaction completion: ; nested exception is: javax.transaction.RollbackException: Timed out
         at com.evermind.server.ejb.EJBUtils.createEJBException(EJBUtils.java:365)
         at com.evermind.server.ejb.EJBTransactionManager.end(EJBTransactionManager.java:139)
         at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:57)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
         at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
         at CubeEngineBean_LocalProxy_4bin6i8.handleWorkItem(Unknown Source)
         at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handle(PerformMessageHandler.java:45)
         at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:138)
         at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
         at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
         at sun.reflect.GeneratedMethodAccessor52.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.SetContextActionInterceptor.invoke(SetContextActionInterceptor.java:44)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
         at oracle.j2ee.connector.messageinflow.MessageEndpointImpl.OC4J_invokeMethod(MessageEndpointImpl.java:297)
         at WorkerBean_EndPointProxy_4bin6i8.onMessage(Unknown Source)
         at oracle.j2ee.ra.jms.generic.WorkConsumer.run(WorkConsumer.java:268)
         at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242)
         at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215)
         at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190)
         at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:814)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: javax.transaction.RollbackException: Timed out
         at com.evermind.server.ApplicationServerTransaction.checkForRollbackOnlyWhileInCommit(ApplicationServerTransaction.java:633)
         at com.evermind.server.ApplicationServerTransaction.doCommit(ApplicationServerTransaction.java:273)
         at com.evermind.server.ApplicationServerTransaction.commit(ApplicationServerTransaction.java:162)
         at com.evermind.server.ApplicationServerTransactionManager.commit(ApplicationServerTransactionManager.java:472)
         at com.evermind.server.ejb.EJBTransactionManager.end(EJBTransactionManager.java:132)
         ... 29 more
    <2008-05-30 12:45:08,655> <ERROR> <tst.collaxa.cube.engine.dispatch> <BaseScheduledWorker::process> Failed to handle dispatch message ... exception ORABPEL-05002
    Message handle error.
    An exception occurred while attempting to process the message "com.collaxa.cube.engine.dispatch.message.instance.PerformMessage"; the exception is: An exception occurred during transaction completion: ; nested exception is: javax.transaction.RollbackException: Timed out
    ORABPEL-05002
    Message handle error.
    An exception occurred while attempting to process the message "com.collaxa.cube.engine.dispatch.message.instance.PerformMessage"; the exception is: An exception occurred during transaction completion: ; nested exception is: javax.transaction.RollbackException: Timed out
         at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:171)
         at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
         at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
         at sun.reflect.GeneratedMethodAccessor52.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.SetContextActionInterceptor.invoke(SetContextActionInterceptor.java:44)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
         at oracle.j2ee.connector.messageinflow.MessageEndpointImpl.OC4J_invokeMethod(MessageEndpointImpl.java:297)
         at WorkerBean_EndPointProxy_4bin6i8.onMessage(Unknown Source)
         at oracle.j2ee.ra.jms.generic.WorkConsumer.run(WorkConsumer.java:268)
         at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242)
         at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215)
         at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190)
         at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:814)
         at java.lang.Thread.run(Thread.java:595)

    jdttaylor,
    I'm afraid I'm having difficulty getting a test case to go through in anything less than about a minute.
    About the suggestion to make the java exec an async web service. Can you point me to something that would describe how to do this? I assume you mean I can simply have a plain old java class that is exposed as a web service. Is this correct? Can I deploy this to SOA Suite or will it be standalone?
    Thanks.

  • Asynchronous BPEL Process called from an empty BPEL process getting lost.

    Hi
    I have an empty BPEL process calling an asynchronous BPEL process. The empty process is triggered by a read file activity. It finishes successfully and even calls the asynchronous process. There is no error thrown but the called asynchronous process does not show up in the dashboard.
    When this asynchronous process is manually run from the console I get the page stating 'Cannot find the specified instance'.
    I am using Jdev 10.1.3.2 and SOA Suit 10.1.3.1.
    Any suggestion as to why this is happening and what is the remedy?
    Buddhadev.

    Check your log as soon as you find that the parent process has found its way into the console. More information on logging can be found here - http://download-uk.oracle.com/docs/cd/B31017_01/integrate.1013/b28982/logging.htm
    Not quite sure why its so, but since 10.1.3, I've observed that the console simply doesn't show errored processes at times. So, checking the log can be a starting point in diagnosing the real issue.
    HTH
    Antony

  • OWSM GATEWAY VIRTUALIZED BPEL PROCESS INVOCATION PROBLEM

    Hi
    This is the error i am getting when i try to invoke the VIRTUALIZED BPEL process from test page of OWSM. i have created a component and added service to it. But this error surfaced when i try to invoke the service. I can see the virtualized WSDL in internet explorer though.
    <env:Envelope
    xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">null
    <env:Body>
    <env:Fault
    xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
    <faultcode>env:Server</faultcode>
    <faultstring>ORABPEL-08021 Cannot find partner wsdl. parnterLink "OWSM_SYNC_BPEL_PROCESS" is not found in process "OWSM_SYNC_BPEL_PROCESS" (revision "1.0") Please check the deployment descriptor of the process to find the correct partnerLink name. </faultstring>
    null</env:Fault>
    </env:Body>
    </env:Envelope>

    Hi Gurus,
    Any update on the issue???
    Regards,
    Dev

  • BPEL Process migration problems   from 10.1.2. to 10.1.3(SOA)

    Hi,
    I am migrating the BPEL Project which was desinged for the BPEL(10.1.2) using BPEL Designer to SOA Suite using the JDeveloper 10.1.3.1 Developer Preview version.
    The taken the project which is deploying&working perfectly in the BPEL Desg&serv (10.1.2).
    But the same project is not compiling in the newer preview version.i got invalid xpath exception.
    my xpath is like
    bpws:getVariableData('inputVariable','payload','/client:commonProjectProcessRequest/client:input/ns1:listOfProducts')
    if i change like this xpath, woking fine...
    bpws:getVariableData('inputVariable','payload','/client:commonProjectProcessRequest/client:input')
    The input element defined as string in wsdl.However am expecting in runtime process will recive an proper xml string as a value of input element so the xpath will work fine..
    Is the any configuration property to turn of xpath validation & variable not initialized warning while compile and building bpel project in the jdevstudio10.1.3.1. preview as well as in SOASuite server.
    I would be happy on any reply.
    Thanks
    bogi

    Hi,
    Bogiraja and me work on the same team... this is a follow up we noticed today. As part of the deployment descriptors of a BPEL, one can set the configuration property "xpathValidation" to False (it is by default True going by 10.1.2 documentation). The documentation says that this would make the compiler not to validate the xpath queries.
    When we tried this in 10.1.3, it did not seem to make any difference and the compiler still did not allow a xpath query which contained a node name which was not defined in the WSDL (bpws:getVariableData('inputVariable','payload','/client:commonProjectProcessRequest/client:input/ns1:listOfProducts') in Bogiraja's mail above)
    Basically, the problem is like this.
    a. The WSDL for the BPEL process defines the input variable as a "string"
    b. When this BPEL process is invoked, we read the content of this variable which is an XML and assign that to a variable of a defined type in the BPEL.
    c. For this purpose, we used to use the syntax as mentioned by Bogiraja in 10.1.2 which does not seem to work on 10.1.3.
    A further observation is that if we define a dummy variable of xsd:any and copy the content of the input into that variable and then apply a similar xpath ('/client:dummyXSDAnyVar/ns1:listOfProducts') on that resultant variable then it seems to work!!
    Expected functionality? Anything we seem to be missing out here?
    Would highly appreciate any responses.
    Thanks in advance.

  • BPEL Process migration problem.from 10.1.2. to 10.1.3(SOA)

    Hi,
    I am migrating the BPEL Project which was desinged for the BPEL(10.1.2) to SOA Suite using the JDeveloper 10.1.3.1 Developer Preview version.
    The taken the project which is buildin and deploying correctly in the BPEL Desg&ser (10.1.2).
    But the same project is not compiling in the newer preview version.i got invalid xpath exception.
    my xpath is like
    bpws:getVariableData('inputVariable','payload','/client:commonProjectProcessRequest/client:input/ns1:listOfProducts')
    if i change like this xpath, woking fine...
    bpws:getVariableData('inputVariable','payload','/client:commonProjectProcessRequest/client:input')
    the element defined as string in wsdl.however am expecting in runtime process will recive an proper xml string as a value of input element so the xpath will work fine..
    is the any configuration property to turn of xpath validation & variable not initialized warning while compile and building bpel project in the jdev10.1.3.1. preview version.
    could you please any one give me solution ?
    Thanks
    bogi

    Hi,
    Bogiraja and me work on the same team... this is a follow up we noticed today. As part of the deployment descriptors of a BPEL, one can set the configuration property "xpathValidation" to False (it is by default True going by 10.1.2 documentation). The documentation says that this would make the compiler not to validate the xpath queries.
    When we tried this in 10.1.3, it did not seem to make any difference and the compiler still did not allow a xpath query which contained a node name which was not defined in the WSDL (bpws:getVariableData('inputVariable','payload','/client:commonProjectProcessRequest/client:input/ns1:listOfProducts') in Bogiraja's mail above)
    Basically, the problem is like this.
    a. The WSDL for the BPEL process defines the input variable as a "string"
    b. When this BPEL process is invoked, we read the content of this variable which is an XML and assign that to a variable of a defined type in the BPEL.
    c. For this purpose, we used to use the syntax as mentioned by Bogiraja in 10.1.2 which does not seem to work on 10.1.3.
    A further observation is that if we define a dummy variable of xsd:any and copy the content of the input into that variable and then apply a similar xpath ('/client:dummyXSDAnyVar/ns1:listOfProducts') on that resultant variable then it seems to work!!
    Expected functionality? Anything we seem to be missing out here?
    Would highly appreciate any responses.
    Thanks in advance.

  • BPEL Process transporting problem.from 10.1.2. to 10.1.3(SOA)

    Hi,
    When i move the project to new SOASuite designer, the transformation activity is showing as assign activity.. and its not moving the imported xsd folders from project root folder to the bpel folder.So while building, it's not able to find the xsd in the relative path what is there in the wsdl.
    Thanks,
    Bogi.

    Hi,
    Bogiraja and me work on the same team... this is a follow up we noticed today. As part of the deployment descriptors of a BPEL, one can set the configuration property "xpathValidation" to False (it is by default True going by 10.1.2 documentation). The documentation says that this would make the compiler not to validate the xpath queries.
    When we tried this in 10.1.3, it did not seem to make any difference and the compiler still did not allow a xpath query which contained a node name which was not defined in the WSDL (bpws:getVariableData('inputVariable','payload','/client:commonProjectProcessRequest/client:input/ns1:listOfProducts') in Bogiraja's mail above)
    Basically, the problem is like this.
    a. The WSDL for the BPEL process defines the input variable as a "string"
    b. When this BPEL process is invoked, we read the content of this variable which is an XML and assign that to a variable of a defined type in the BPEL.
    c. For this purpose, we used to use the syntax as mentioned by Bogiraja in 10.1.2 which does not seem to work on 10.1.3.
    A further observation is that if we define a dummy variable of xsd:any and copy the content of the input into that variable and then apply a similar xpath ('/client:dummyXSDAnyVar/ns1:listOfProducts') on that resultant variable then it seems to work!!
    Expected functionality? Anything we seem to be missing out here?
    Would highly appreciate any responses.
    Thanks in advance.

  • Message protection (Encryption) through OWSM in BPEL process 11g

    What is my requirements ?_
    I want to encrypt the messages in BPEl process using OWSM message protection policies
    What is the configuration i am using ?_
    Weblogic Server 10.3.3
    Soa Server 11.1.1.3.0
    Oracle JDeveloper 11.1.1.3.0
    What I have done so far ?_
    (1) Created one Sync BPEl process (CalledAddition) which take two input and add them and give the output
    (2) Created one more Sync BPEL process (CallerProcess) which takes two input and call the above created bpel process
    (CalledAddition) and get the response back as addition of two number.
    Now I want to Add OWSM Message protection policy to Encrypt the message in Main BPEl process(CallerProcess) and the called service (CalledAddition) decrypt the message upon invocation. It is a very simple scenario.
    For this purpose I have done the following OWSM Policy Configuration:
    (1) Created a java keystore as follows
    keytool -genkey -keyalg RSA -keystore test_keystore.jks -storepass welcome1 -alias client_key -keypass welcome1 -dname "CN=Client, OU=WEB AGE, C=US" -keysize 1024 -validity 1460
    (2) Copy the keystore (test_keystore.jks) to location domain/config/fmwconfig.
    (3) Go to EM console/WeblogicDomain/Security/Credential and delete the map oracle.wsm.security and then again created it, with no key inside.
    (4) Go to EM console/WeblogicDomain/Security/SecurityProviderConfiguration and configure the above created keystore as follows:
    (i) Keystore Type=JKS, Keystore Path=./test_keystore.jks, password=welcome1, confirmPassword=welcome1
    (ii) Signature Key:
    Key Alias=client_key, Signature Password=welcome1, confirmPassword=welcome1
    (iii)Encryption Key:
    Crypt Alias=client_key, Crypt Password=welcome1, confirmPassword=welcome1
    (5) Now restart the server (both Weblogic and SOA server)
    (6) Now again go to EM console/WeblogicDomain/Security/Credential and open expand the oracle.wsm.security map, Automatically
    the following keys are made inside it:
    (i) sign-csf-key
    (ii) enc-csf-key
    (iii) keystore-csf-key
    Created one more key inside it explicitly:
    (iv) basic.credentials with username=weblogic and password=welcome1
    (7) Go to EM console/WeblogicDomain/WebServices/Policy and cretaed the following policies:
    oracle/wss11_message_protection_service_policy:
    (i) select policy oracle/wss11_message_protection_service_policy from list and click on create like button. This will create a copy of the policy with different name.
    (ii) Give the new name as oracle/wss11_message_protection_service_policy_Copy ( which is by default)
    (iii) Local Optimization = off and enabled is checked
    (iv) Attachment Attributes …..
    Applies To=Service BIndings and Service Category=Service Clients
    (v) Assertions …..
    Select middle assertion MessageProtection and Advertised=checked and Enforced=checked
    (vi) Configuration....
    Add following Configure properties, if present already edit them as follows:
    (a) name=keystore.enc.csf.key, property set=standard-security-properites, value=enc-csf-key, Type=Optional
    (b) name=keystore.sig.csf.key, property set=standard-security-properites, value=sign-csf-key, Type=Optional
    (c) name=role, property set=standard-security-properites, Default=ultimateReceiver, Type=Optional
    (v) Setting.........
    Done the following setting
    - Message Security/include timestamp=unchecked
    - Message Signing Setting/Include entire body=unchecked (since we need only encryption, no signing of message)
    - Message Encrypt Setting/include entire body=checked
    (vi) Validate and save
    (vi) Thus a new policy is made in domain with name oracle/wss11_message_protection_service_policy_Copy
    Simmilarly create oracle/wss11_message_protection_client_policy:
    (ii) Give the new name as oracle/wss11_message_protection_client_policy_Copy ( which is by default)
    (iv) Attachment Attributes …..
    Applies To=Service BIndings and Service Category=Service Endpoint
    (vi) Configuration....
    Add following Configure properties, if present already edit them as follows:
    (a) name=keystore.recipient.alias, property set=standard-security-properites, value=client_key, Type=Optional
    (b) name=role, property set=standard-security-properites, Default=ultimateReceiver, Type=Optional
    (vi) Thus a new policy is made in domain with name oracle/wss11_message_protection_client_policy_Copy
    Rest of the steps(i,iii and v) are same as described above in case of service policy
    After creating the policies in domain attach them to the bpel process as follows:
    (1) Go to SOA project (CallerProcess) in EM console.
    (2) Click on policy tab
    (3) First attach the client policy (oracle/wss11_message_protection_client_policy_Copy) to the endpoint of the process CallerProcess.
    (4) Then attach the service policy (oracle/wss11_message_protection_serivce_policy_Copy) to the reference in CallerProcess which is calling CalledAddition.
    (5) Now test the process (CallerProcess)
    pass input say 10 and 20 in input
    Upon testing it give the following error_
    Web Service invocation Failed:
    oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: InvalidSecurity : error in processing the WS-Security security header
    I have made all thing clear. I have gone through several documents but unable to find the solution. If anyone please help me in this case.
    Thanks

    I have followed same steps and getting same errror.
    User 868153, were you able to resolve this issue.
    Appreciate your help.
    Thanks

  • Calling OWSM Secured BPEL Process from JAVA

    HI,
    I have created OWSM gateway and registered BPEL process under that.
    Now i want to call that BPEL process from java class. Can anybody please tell me how can i pass the security SOAP header.
    Here is the class i am using ...
    package com.javarpc;
    import java.rmi.RemoteException;
    import javax.xml.namespace.QName;
    import javax.xml.rpc.JAXRPCException;
    import javax.xml.rpc.Service;
    import javax.xml.rpc.ServiceException;
    import javax.xml.rpc.ServiceFactory;
    import javax.xml.rpc.ParameterMode;
    import javax.xml.rpc.encoding.XMLType;
    import javax.xml.rpc.soap.SOAPFaultException;
    import org.apache.axis.client.Call;
    import org.apache.axis.message.SOAPBodyElement;
    import java.io.InputStream;
    import java.io.ByteArrayInputStream;
    public class CallHelloWorld
    private static QName SERVICE_NAME;
    private static QName PORT_TYPE;
    private static QName OPERATION_NAME_IN;
    private static String SOAP_ACTION;
    private static String STYLE;
    private static String THIS_NAMESPACE = "http://xmlns.oracle.com/HelloWorld";
    private static String PARAMETER_NAMESPACE = "http://xmlns.oracle.com/HelloWorld";
    private String location;
    static
    SERVICE_NAME = new QName(THIS_NAMESPACE,"HelloWorld");
    PORT_TYPE = new QName(THIS_NAMESPACE,"HelloWorld") ;
    SOAP_ACTION = "process";
    /*Setting for Wraped style of calling*/
    //STYLE = "wraped";
    //OPERATION_NAME_IN = new QName(THIS_NAMESPACE,"HelloWorldProcessRequest");
    /*Setting for Message style of calling*/
    STYLE = "message";
    OPERATION_NAME_IN = new QName(THIS_NAMESPACE,"process");
    public void setLocation(String location)
    this.location = location;
    public void initiate(String symbol)
    try
    /* Create Service and Call object */
    ServiceFactory serviceFactory = ServiceFactory.newInstance();
    Service service = serviceFactory.createService( SERVICE_NAME );
    Call call = (Call)service.createCall( PORT_TYPE );
    /* Set all of the stuff that would normally come from WSDL */
    call.setTargetEndpointAddress( location );
    call.setProperty(Call.SOAPACTION_USE_PROPERTY, Boolean.TRUE);
    call.setProperty(Call.SOAPACTION_URI_PROPERTY, SOAP_ACTION);
    call.setProperty( Call.OPERATION_STYLE_PROPERTY , STYLE );
    call.setOperationName(OPERATION_NAME_IN);
    /*Setting Input for message type and invoke web service through message style*/
    String strXMLInput="<HelloWorldProcessRequest xmlns=\"http://xmlns.oracle.com/HelloWorld\">";
    strXMLInput+="<enovia>test</enovia>";
    strXMLInput+="</HelloWorldProcessRequest>";
    SOAPBodyElement[] requestSBElts = new SOAPBodyElement[1];
    InputStream resultInputStream = new ByteArrayInputStream(strXMLInput.getBytes());
    requestSBElts[0] = new SOAPBodyElement(resultInputStream);
    System.out.println(requestSBElts[0]);
    java.util.Vector output = (java.util.Vector) call.invoke(requestSBElts);
    System.out.println( "HelloWorld BPEL process initiated by message " +output);
    /*Setting Input for message type and invoke web service through wraped style
    call.addParameter(new QName(PARAMETER_NAMESPACE,"input"), XMLType.XSD_STRING, ParameterMode.IN);
    //call.setReturnType(new QName("XMLType.XSD_STRING"));
    // call.setReturnType(new QName("String"));
    Object[] params = new Object[1];
    String outPut = new String();
    params[0] = symbol;
    call.invokeOneWay(params);
    //Object ret;
    //ret = (String) call.invoke( params );
    System.out.println( "HelloWorld BPEL process initiated" );*/
    catch (SOAPFaultException e)
    System.err.println("Generated fault: ");
    System.out.println (" Fault Code = " + e.getFaultCode());
    System.out.println (" Fault String = " + e.getFaultString());
    catch (JAXRPCException e)
    System.err.println("JAXRPC Exception: " + e.getMessage());
    catch (ServiceException e)
    System.err.println("Service Exception: " + e.getMessage());
    catch (RemoteException e)
    System.err.println("RemoteException: " + e.getMessage());
    public static void main(String[] args)
    String symbol = "Kevin";
    // String location = "http://valizprd208.val.cummins.com:7777/orabpel/tst/HelloWorld/1.0";
    String location = "http://integrationvaldlv.cummins.com:7777/gateway/services/SID0003002?wsdl";
    CallHelloWorld client = new CallHelloWorld();
    client.setLocation( location );
    client.initiate( symbol );
    }

    You can get sample input by intercepting the request to check what exactly you need to put in SOAP header and what in body.
    To manipulate soap header you can look at : http://www.oracle.com/technology/sample_code/tech/java/codesnippet/webservices/soapheader/index.html
    HTH
    Chintan

  • Creating simple Business Rules in BPEL process

    Hi,
    I have an environment consisting of SOA Suite 11g running on Weblogic Server. I'm using JDeveloper 11g for development.
    Scenario
    I have a BPEL process which starts off by polling a DB table and I then assign the input to a Recieve activity's InputVariable. I have a 'Number' column which will contain a number between 1 and 3. I then require Business Rules (BR) to be set up which read this value, and based on the number, assign a 'Name' string (which is to be the output variable from the business rules) to be used later on in BPEL process.
    Problem - I have followed the basic tutorials available in order to set up the business rules, but am getting numerous errors. Firstly, I sometimes find that my input/output variables created during setup of BR component and the XSD based on this, does not have XML Faces automatically created for it (therefore have to create it myself by clicking on the + button and doing this for each element of XSD). When I do get this working, I then double-click on my Business Rules activity in my BPEL process, only to find that the input/output variables here no longer are assignable to my BR input/output variables as I get the following error "Exception: Problem Building Schema!".
    I am not sure why this is, but suspect that my XSD (which is very simple anyway) or the setup steps I follow to define the link to my XSD, are wrong.
    I have taken the following steps so far:
    1. Create empty BPEL process
    2. Set up polling adapter to poll DB table
    3. Create Receive activity and assigned polled input to created variable
    4. Add Business Rules component to composite and set up and create dictionary here. Also set up inputs/outputs to be in form of my XSD elements.
    5. Add Business Rules component to my BPEL process and configure this to include input/output variables (*This is where error occurs*)
    6. Go back to .rules component in composite to define rule and define rule
    Upon deployment, I get many errors most of which pertain to "Unresolved XML element... make sure XML element +xxxxx+ is defined in one of WSDL's that are referenced by the deployment descriptor."
    I have only imported a simple XSD containing two elements to this project. The other XSD is the one of my polling adapter. I've not created any input/output variables for the overall BPEL process as didn't think I was required to.
    Can you please help in getting this process doing the simple activities described at the top.
    I appreciate your help.
    Edited by: user10248308 on 10-Mar-2010 11:49

    Hi,
    Create a project with BPEL composite
    Now drag a business rule
    Now create input variable of type ur requestelement
    and output variable of type response element
    Now in rules designer page take decision table
    and then craete a condition (inputelement.input > 1000) and in the rule select true
    now create another rule select false
    Npw create an action with assertion and select the parameterized box there
    now in designer page for first rule assign some value (say 500) and for second rule some value(100)
    Now in bpel u have to assign a value to input var of BR
    Deploy the process
    If u supply 10000 u will get 500
    if u supply 100 u will get 100
    In the same way u can do by using If-Then
    You can use facts and bucketsets according to ur requirement
    Regards
    PavanKumar.M
    PavanKumar.M

  • Use AQ Adapter Header Message ID Value in BPEL Process

    Hi guys,
    I'm trying to obtain the value of the message_id in a header variable created in a receive branch activity linked to an AQ Adapter, i've created the variable in the adapter tab of the receive activity and linked the message type variable with the InBound WSDL of the header. I want to use this message_id value obtained in the dequeue operation to set as correlation_id in a future enqueue. The question is, when i do a copy operation in an assign activity of the message_id in the first header variable (dequeue) to the second header variable (enqueue) the BPEL raises an error telling me that the variable was empty, can you help me with this? Am i doing the whole thing wrong? I'm using the 10g version on R3.
    Thanks a lot!

    Hi Anuj,
    I selected "Receive" while configuring B2B adapter. While creating the BPEL process to receive the message, i have created it as Empty BPEL process "Define WSDL later". Then i configured the B2B adapter. In the Empty BPEL process i place a receive activity and wire the B2B adapter. Operation available in Receive activity is "Receive". I'm i configuring wrongly?
    Thanks,
    Terry

  • Dynamic addressing in Empty BPEL

    hi
    I am trying to implement dynamic addressing in Empty BPEL(because my BPEL gets input from JMS queue so there is no requirement of Client)
    But without the client partner link(which BPEL generates in case of syn or async BPEL) i am not able to implement dynamic addressing.
    While transform activity it doesn't recognize the variable which is of ws-addressing.xsd type
    it gives the error "information about variable can not be reached"
    Please suggest something.
    Thanks in advance

    But, why would you need dynamic addressing in empty bpel process ?
    Cheers,
    AR

  • Database polling adapter within an asynchronous BPEL process

    Hi,
    I have a requirement to poll a database table withing an asynchronous process. The reason I want to use a receive within an asynchronous BPEL is because the process needs to be notified many times thru polling. So might need many receive activities.
    I have developed a process as described below :-
    1. Created an asynchronous process.
    2. Created a Database adapter for polling a table. Logical delete strategy is being used.
    3. Have put a receive activity from the DB Adapter created.
    4. Created a correlation set consisting of a single property(String)
    5. Created a property alias to refer to
    a. the input string of the asynchronous process. (unique for this process)
    b. the input from the database adapter (unique for this process)
    I initiate this process from the console. Then I inserted a record the table with proper inputs.
    But the BPEL waits indefinitely at the receive activity.
    When I try to poll the table from an empty BPEL process, it works perfectly fine.
    Could someone please help me here.
    Thanks in advance
    Saptarishi

    Hi,
    Could someone pls answer this query.
    Regards,
    Saptarishi

Maybe you are looking for

  • ASA 5520 site-to-site VPN question

    Hello, We have a Cisco 5520 ASA 8.2(1) connected to a Cisco RVS4000 router via an IPsec Site-to-Site VPN. The RVS4000 is located at a branch office. The tunnel works beautifully. When computers at the remote site are turned on the tunnel is establish

  • Running really s l o o o o w  ...esp. MS Office apps

    My machine runs pretty darn slow, esp. if I run, say, Word & Excel and Firefox, iChat and a few other small apps. I will say this, I'm running with only the 512Ram it came with and it's a 2Ghz machine. I know RAM can be a factor here. I know Office i

  • Reservation Deleted by User in Network

    Hi, User has wrongly deleted reservation in network even after PO created in System .After deleting reservation ,he has done GRN in system and then he tries to do 281 now (goods issue),system  is not allowing . Is there any configuration exists for t

  • Why do I have to keep re-installing Flash Player?

    I have read the forums and tried all the suggestions and nothing works. I have Windows 7 and IE 9. It has nothing to do with IE as I have the same problem with Firefox. This is REALLY frustrating!

  • 11.8.800.94 Crashing on ESPN Videos

    Everytime I open Sportscenter and click a video flash player streaming goes, stops, goes, stops crashes saying it's script has stopped. Me 11.8.800.94 Windows 7 (64-bit) Mozilla Firefox current version My system is simple gateway laptop. do use skye