P6 stand alone and network installed to same pc

Dear Member,
i have a question, is it possible if i'm installing P6 stand alone version and P6 network version to the one desktop pc, and running together?
please advice me, because our client requested to me, he want to install P6 stand alone and network version together to his pc, i told him, it's impossible. please make sure for this case
thank you

Hi,
Yes, you can install P6 stand alone version and P6 network version to the one desktop pc.
But, at a time you can login on a single database only, you just need to select the database at the time of Login i.e. when you are login to standalone, select the standalone database and when you want to login to network version, you need to select the network database.
Regards,
Amit
Edited by: 1002854 on Apr 27, 2013 12:41 PM

Similar Messages

  • Stop a stand-alone and web app from starting in an App Server

    I want to programmatically shut down an application from starting, e.g., mid-way in its start, if a certain condition is raised. I do not want code as System.exit(int) as this API will terminate the entire JVM and more than 1 application running in the JVM will be shut down. My goal is to stop the start process of only one application that is running in the same shared JVM. The JVM is running more than 1 application.
    Obviously, throwing a Runtime exception (throw new RuntimeException())does not stop the application - application still gets started.
    I want a solution that will work for both stand-alone application and a web application. However, if I have to use two different approaches (one approach for stand-alone, another for web), I will be fine with that approach.
    I am using WebSphere 6.1 as application server.
    Please suggest what are my options to stop the application from start for both stand-alone and web application.

    There is of course no general solution to that.
    Consider the following.
    1. Initial thread starts 10 threads, and then it exits.
    2. One thread determines that exit should occur.
    3. How do other threads get terminated?
    ...and a web application.Conceptually that is a bit suspect. If you don't want it to run then the simple solution is don't install it. In general you don't want a web app to "exit" if a known error condition occurs. For example it shouldn't exit if the database connection fails but instead the behavior should change until the database connection is restored.

  • Upgrade process for SQL server 2005 service pack4 on stand alone and cluster servers

    Hi All,
    We have iniated a process of upgarding sp4 for all sql 2005 stand alone and clusters servers.
    Please provide me the step by step process for installing sp4 and roll back paln for sql 2005 servers.And before proceeding with sp installation what are the pre check/pro active things that we need to take care.
    Maheshwar Reddy

    Hello,
    For applying SP to SQL 2005 cluster environment/standalone please refer to below link
    http://www.sqlcoffee.com/Tips0007.htm
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • When trying to print, adobe reader 11.0.07 keeps "Not responding" for 2 - 5 minutes before finally working? I have tried uninstalling and re-installing but same problem. What is going on? I have windows 7

    When trying to print, adobe reader 11.0.07 keeps "Not responding" for 2 - 5 minutes before finally working? I have tried uninstalling and re-installing but same problem. What is going on? I have windows 7

    First of all, why did you say yes to Nero Back up before researching what it does with files already on the HDD? When I install Nero, the Back Up is the first thing I disable, it is a nagging pain, there are much better backup programs available. There are several file recovery programs out there to recover deleted files, that is, if that is what happened. Also, if you haven't overwritten the files, so you should be able to find them.

  • After installing two updates, I cannon create .pdf documents as the window says "Missing PDF Maker Files."  I've uninstalled Acrobat and re-installed twice, same problem

    After installing two updates, I cannon create .pdf documents as the window says "Missing PDF Maker Files."  I've uninstalled Acrobat and re-installed twice, same problem.  How do I correct problem?

    Thank you.   I googled my problem and got good answers involving making changes to my Office settings - which worked. 
    Sent via the Samsung GALAXY S® 5, an AT&T 4G LTE smartphone

  • PDC demotion to Stand-Alone and re-promote to PDC

    I have to change the account credentials that were used to add PDC services to my ODM. My questions is that if I demote this PDC to stand alone and then re-promote it back to a PDC using different account credentials will I have any problems?
    One issue I'm concerned with is whether or not anyone will be able to login. Another concern is if it will mess up all of the Windows computers currently attached to the PDC. If it does mess it up will I have to add them all back (roughly 200 W2K/XP clients) to the domain?

    If the PDC is demoted and repromoted using a different username. The Windows computer will still connect as they did before.

  • Just purchased Lightroom (stand alone) and asks for a previous serial number. I don't have one only an students version of photoshop for which I can't find the serial number

    Just purchased Lightroom (stand alone) and asks for a previous serial number. I don't have one only an students version of photoshop for which I can't find the serial number

    If it is asking for a serial number for a previous version then you purchased an upgrade version rather than a standalone version.  You should be able to determine this based on the price you paid.  If you do not own an earlier version then you need to purchase a full version rather than an upgrade.  If you did purchase a full version but acquired an upgrade version then you will need to acquire the full version.
    Contact Adobe support thru chat to help get resolution...
    Get help with orders, refunds, and exchanges (non-CC)
    http://helpx.adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 )

  • Wi-fi connection on HP Deskjet 2540 and network at the same time?

    Hello
    Please can you tell me how to keep my connection to my wi-fi printer whilst connected to my Virgin Media Broadband? Every time I want to print I have to switch off the Virgin network connection and connect to the HP Deskjet Wi-fi, and then switch it back again to Virgin to browse or send emails.
    Thank you for your help
    AC33 

    Hey there @AC33 Welcome back
    I understand you are looking to install your printer on your network, so you can use the internet and printer at the same time. By the sounds of it, you may be connecting the printer currently, using the Wireless Direct feature, which will only allow you to connect to the printer or the network at a time. Basically, the printer is acting like a network.
    Here is a link for you to check out. It will help you install the printer on your network:
    Setting Up the Printer for a Wireless network for the HP Deskjet 2540 and HP Deskjet Ink Advantage 2...
    I hope this helps you, let me know the outcome
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Can we use both Stand alone and Extended classic in one SRM system

    Hi All,
    Our client is now using Stand alone SRM system with back-end R/3 FI-CO system. Now they want to go Extended classic scenario for few product categories.
             Would it be possible to use both in one SRM system? If possible could you please provide what are the sequential steps to do this?
                 Thanks in advance.
    Regards,
    Ram

    Hi Ramesh,
    How did you end up solving your problem, as i have the same scenario.  Did you use this BADI (
    SRM Server->Business Add-Ins->Control Extended Classic Scenario->Activate Extended Classic Scenario)?  Based on my reading, it seems this BADI is relevant to switch between extended classic and classic scenarios. 
    From what i understand, we can control the standalone scenario via the define backend system configuration (SAP SRM -> SRM Server -> Technical Basic Settings -> Define Backend System for Product Category).  In my scenario, I have one set of product categories, so i will likely need to implement this BADI (BBP_DETERMINE_LOGSYS, method:   DETERMINE_LOGSYS - SAP SRM -> SRM Server -> Business Add-Ins ->Shopping Carts and Requirement Items -> Determine Backend System / Company Code) in order to determine the correct backend system based on company/plant for example. 
    Did you then leave the extended classic scenario activated (IMG --> Supplier Relationship Management -> SRM Server-> Cross-Application Basic Settings->
    Activate Extended Classic Scenario)? 
    Or how did you achieve both standalone and extended classic using one SRM server?
    cheers,
    AD

  • SWF as a stand alone and a loadable app.

    Hi,
    This is the first time I have to implement this kind of
    requirement in AS3.
    Application I am developing will be used as a stand-alone swf
    (embedded in html) and as a third party movie clip that will be
    loaded by clients into other AS3 container on different domains.
    The app is dynamic and will have to be available for manipulations
    by the loading movie (as a component).
    I would love to hear your experiences, learn about potential
    caveats that I may encounter and remedies to overcome the common
    obstacles pertaining to this dualistic nature. I have a vast
    experience with loading swf that I wrote into other swfs that I
    wrote too but never dealt with the distributing flash apps.
    For instance I already discovered that because of the shift
    in the stage reference I will have to be careful when to use it
    (after the app is added to stage, naturally, but this aspect
    escaped my attention in all the previous developments).
    Or, what would be a preferred way for a third party to load
    my swf and access its application domain (for help instructions)?
    I guess, in essence, I would like to have a share of your
    wisdom on what are the best practices in a Flash application
    distribution.
    I have no intention to bother you with hand handling - just
    some conceptual advice. I will dig for the rest myself.
    Thank you very much for your time.

    It is
    bundled with Logic Pro
    Martin

  • Can I unstall Office 2011 from a Macbook and re-install the same software on a different Mac/Mackbook?

    Hi all,
    I’ve looked around Google and here and I can’t find a definitive answer to my question so hopefully you guys can give me some advice
    I bought the Office package in 2011 when it was new and installed it on my Macbook. I now plan to buy an iMac for the purpose of studying so I'd like to remove it from my Macbook and transfer it to the new Mac. My Macbook is running on the current highest software (the name escapes me at present, I'm not on it to check) and I assume the Mac will be too. If I were to uninstall everything, would I be able to use the same disc (i.e. same unique code) on the other computer? I believe I only have the 1 disc 1 Mac version so can't have two running with the same software.
    Ideally I'd not like to buy another Office package so any advice would be much appreciated. I realise I may not have much choice though...!
    Many thanks for your assistance.
    Kind Regards,

    New Mac's come with OS X 10.8 so you would have to check compatibility of your software with the new OS X versions.
    http://roaringapps.com/apps:table
    Next you will have to check if the software will install or not on 10.8 from the disk, since the disk is static it can't change for newer OS X versions, however the software itself might run fine if a more recently updated version is downloaded  and installed, then the license key entered.
    Far as licensing concerns, you will have to check with the developer how to go about deauthorizing, uninstalling and getting a new license key for the new machine or if you can continue to use the existing one.
    Most licenses are for one machine, however some can be multiple machine packs.
    If you don't exactly need Office specifically to work with other Office users, you can also install the free LibreOffice and it can open your Office files.
    The thing with Office is it's widely used in businesses, so if you learned it already then it doesn't make much sense to continue using it and paying money for only personal use.
    https://www.libreoffice.org/
    LibreOffice is truly cross platform, Linux, OS X and Windows. The files are easily exchange and many Mac users are thrilled using it apparently as the developers have commented a great deal of Mac users are installing it.
    If you have trouble installing, it's likely Gatekeeper security that's on the new 10.8 machines, simply hold control key and click on the installer/program and select "Open" and it will remmeber it's a trusted program from then on.

  • Treloaded.  Getting a message "iTunes not installed correctly"  Error 7 Windows Error 998.  Removed and retried install got same message??????

    Trying to install iTunes on my XP machine after the operating system was reloaded.  Getting a message "iTunes not installed correctly"  Error 7 Windoes Error 998.  Removed and retried installgot same message??????

    This can sometimes indicate that one of the other itunes-related software components is damaged. (Usually Apple Application Support, but there are other possibilities beyond that.)
    Perhaps first try a complete uninstall/reinstall as per the following document:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Does that get you past the 7?

  • Client 32x and 64x instalation in same server

    Hi all.
    I have a Windows Server 2008 R2 64x with Oracle DB 11.2.0.1.0 64x and client 64x correctly installed and working
    I need install the client 32x because some applications require.
    Can someone help me with this case
    Thank you
    Carlos

    Carlos Codriansky wrote:
    Hi all.
    I have a Windows Server 2008 R2 64x with Oracle DB 11.2.0.1.0 64x and client 64x correctly installed and workingThe database install included the client software. No separate installation was needed.
    >
    I need install the client 32x because some applications require.Good architecture would not put the application on the same server as the database. And if the application is on a different server, it doesn't matter what client software is on the database server.
    >
    Can someone help me with this case
    If you are determined to run the app on the same server as the database, and that app needs a 32-bit client, then install the 32bit client. Install it under the same ORACLE_BASE but in a different ORACLE_HOME.
    Hint #1 when installing on Windows, Oracle wants to use a ORACLE_BASE that includes the name of the currently logged on user, like "c:\app\estevens". This is absurd. Override it to "C:\app\oracle".
    Hint #2: name the HOME in such a way as you will know if you are looking at the 32-bit vs. the 64-bit home: c:\app\oracle\product\11.2.0\client_32 and c:\app\oracle\product\client_64.
    Hint #3: Loose Windows. Get a real operating system.
    Thank you
    CarlosBut if you are determined to go with this architecture, all you have to do is ins

  • OBIEE and EPM install on Same box

    Hi
    I have installed EPM 11.1.2.2 and OBIEE on same linux box with different weblogic domains. (bifoundation for OBIEE and epmsystem1 for EPM).
    But will creating these weblogic domains i used 7001 as the port in both the cases. ( for obiee i used basic install where it takes default port).
    OBIEE /analytics is coming up at 7001 but if i try to enter with the epmsystem1 .. it denies the logon.. username and password not correct.
    I have few questions here :
    1) How can OBIEE and EPM weblogic domains be created on the same port : 7001
    2) why my epm instance is not coming up at 7001 although i installed it at 7001.
    Because of this if i restart my hyperion services .. they wouldn.t come up untill i stop obiee.. so i have to first start epm and the OBIEE and the other way round would not work.
    The best way to avoid this would be create these two weblogic domains on differenr ports, but since i was confused with this behaviour.. thought of asking it to the experts.
    Thank You
    Regards
    Sandeep Kumar Upadhyay

    The easiest way around it would be when you first deploy one of the EPM web applications set the admin server port to something different than 7001 then it wouldn't conflict with the admin server being used for OBIEE
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Stand alone APEX listener install fails with timezone region  not found

    Hi,
    I have searched the forum but found only a thread for the installation with Goldfish.
    I am very new to all this so I apologise if my problem is too simple, but please help as I am very frustrated with it.
    I have a 10.2.0.4 database on Windows XP for testing with.
    I installed APEX into it successfully, then down loaded the listener.
    I have to Java installations, one under my Oracle Home, the other under Middleware where I have JDeveloper installed.
    If I try $ORACLE_HOME/jdk/bin/java -jar apex.war it throws a Unsupported class version so I tried with the Middleware jdk and it appeared to install.
    I then went to http://localhost:8080/apex/listenerConfigure and entered the password for APEX_PUBLIC_USER and the info for a basic connection, it fails with the following message
    Request could not be processed due to error:
    Sat Apr 30 00:06:30 CAT 2011
    ORA-00604: error occurred at recursive SQL level 1
    ORA-01882: timezone region not found
    Please if anyone can help me through asap this I would be most grateful

    Yay, I found the solution:
    I started by running:
    begin
    for v_rec in (select tzname,tz_offset(tzname) v_offset from v$timezone_names
    where tzabbrev='CAT') loop
    dbms_output.put_line('tzname '||v_rec.tzname||', offset '|| v_rec.v_offset);
    end loop;
    end;
    SQL> /
    tzname Africa/Khartoum, offset +03:00
    tzname Africa/Windhoek, offset +01:00
    tzname America/Anchorage, offset -08:00
    tzname US/Alaska, offset -08:00
    PL/SQL procedure successfully completed.
    I then added -Duser.timezone="+01:00" before the apex.war ie
    java –jar -Duser.timezone="+01:00" apex.war

Maybe you are looking for